Texas Instruments

TAS5101DAPR - Stereo Class D Audio Amplifier | Texas Instruments

Teilenummer: TAS5101DAPR ✗ Abgekündigt
32-lead HTSSOP Package
MOQ: 1 |

TAS5101DAPR Übersicht

The Texas Instruments TAS5101DAPR is a two-channel Class D stereo audio amplifier with an integrated PWM power output stage, delivering up to 15 W per channel into a 4 ohm load. The device accepts digital audio inputs and is packaged in a 32-lead heat-pad HTSSOP package for surface-mount audio power designs. Its digital input architecture, stereo output configuration, short-circuit protection, thermal protection, and shutdown function place it between digital audio sources and bridge-tied speaker outputs.

A Class D audio amplifier is a switching power amplifier that converts a digital or analog input signal into a pulse-width-modulated output. This approach offers much higher energy efficiency than a conventional linear audio amplifier because the output transistors operate primarily in their switching states rather than dissipating the full voltage difference continuously. The TAS5101DAPR therefore belongs to the digital audio power-amplifier category and the broader amplifier IC hierarchy used in portable speakers, home audio equipment, and compact consumer systems.

The principal advantages include a 15 W x 2 output capability at 4 ohm, a two-channel stereo configuration, and digital input support. These characteristics make the amplifier suitable for systems that need two amplified speaker outputs without using separate full-power amplifier channels. Integrated short-circuit and thermal protection improve robustness during overload or thermal stress, while shutdown provides a controlled path for disabling the amplifier when the system is inactive.

The HTSSOP package provides a compact implementation but requires deliberate power-layout and thermal-management practices. Its exposed power pad must be connected to the supply and ground planes according to the manufacturer pin description and layout guidance. Because Class D output stages carry switching current and high common-mode voltage, component placement, output-loop layout, speaker return routing, and ground-plane design can materially affect EMI, click-and-pop behavior, and thermal performance.

Typical uses include powered speakers, compact stereo audio systems, soundbar amplifier sections, multimedia speaker enclosures, portable docking systems, and auxiliary audio modules driven by a digital audio source. For a 4 ohm speaker network, the published 15 W x 2 rating provides a clear sizing point, although continuous power also depends on the supply capability, thermal design, signal format, and output-filter implementation.

The primary design consideration is that the amplifier's supply must support the switched output current while maintaining low ripple and adequate headroom. Place the input, output, and power-ground components close to their associated pins, keep high-current output loops compact, and verify copper and via capacity before loading both channels to their maximum rated output.

This product record combines package, lifecycle, output-power, protection, and application information with practical implementation guidance and drop-in candidate analysis. It helps engineers separate electrical compatibility from simple package similarity before committing to a replacement or redesign.

Drop-in-Alternativen für TAS5101DAPR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit TAS5101DAPR (gleiche Bauform und Footprint) – abweichend in Amplifier Class, Mounting Type, Number of Channels, Output Configuration, Package.

Texas Instruments
Amplifier Class: Class D (true digital PWM power stage)
Mounting Type: Surface mount, gull wing terminal form
Number of Channels: 2 (stereo)
Vergleichen mit TAS5101DAPR →

TAS5101IDAPR

✅ Drop-In
📦 32-HTSSOP
Same 32-lead TSSOP package class and published stereo Class D amplifier configuration; documented 15 W x 2 output rating for TAS5101DAPR differs by 0 W from the comparison candidate's unverified rating

📋 Referenzalternative (nicht im Katalog)

TAS5101DAP

✅ Drop-In
Texas Instruments
📦 32-HTSSOP
15 W RMS into 4 ohm · 2 (stereo) · Class D (true digital PWM power stage) · Stereo PWM, 3.3 V · Single-ended · >95 dB (TDAA system) · 0.1 % at 1 kHz, 15 W RMS into 4 ohm · >90 % into 8 ohm load

Preis auf Anfrage

Datenblatt ansehen →

TAS5102DAPR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 32-HTSSOP
Same 32-lead TSSOP stereo Class D family footprint; output-power difference versus 15 W per channel requires confirmation

📋 Referenzalternative (nicht im Katalog)

TAS5103DAPR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 32-HTSSOP
Same 32-lead TSSOP stereo Class D family footprint; rated output may differ from the 15 W per channel target and requires confirmation

📋 Referenzalternative (nicht im Katalog)

TAS5104DAPR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 32-HTSSOP
Same 32-lead TSSOP stereo Class D family footprint; rated output may differ from the 15 W per channel target and requires confirmation

📋 Referenzalternative (nicht im Katalog)

TAS5101DAPR Grenzwerte & elektrische Eigenschaften

Product Type Stereo Class D audio amplifier IC
Number of Channels 2 channels
Amplifier Class Class D
Ausgangskonfiguration Stereo
Maximum Output Power per Channel 15 W at 4 ohm
Total Maximum Output Power 30 W across 2 channels
Input Type Digital audio input
Output Stage Integrated PWM stereo power output stage
Short-Circuit Protection Yes
Thermal Protection Yes
Shutdown Function Yes
Gehäuse 32-lead HTSSOP
Montageart Surface-mount SMD
Terminal Count 32 terminals
Lead Form Gull wing
Packaging Tape and reel
Temperature Grade Commercial
Lebenszyklusstatus Obsolete (EOL)

TAS5101DAPR 32-lead htssop Pinbelegungsleitfaden

Pinbelegung für TAS5101DAPR (32-lead htssop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für TAS5101DAPR im 32-lead htssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TAS5101DAPR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TAS5101DAPR ist geeignet für 6 Anwendungs: Powered Stereo Speaker, Compact Multimedia Speaker, Soundbar Amplifier Section, Digital Audio Docking System, Auxiliary Audio Module, Portable Battery Speaker.

🎧

Powered Stereo Speaker

The TAS5101DAPR fits powered speakers requiring two amplified channels and digital source input. Its published 15 W x 2 capability at 4 ohm provides a direct sizing point for compact stereo speaker pairs, while the integrated PWM output stage reduces the number of external power-amplifier sections. The 32-lead HTSSOP package still requires a carefully designed exposed-pad connection and low-impedance supply network. Engineers should verify the required digital format, configure the output filtering for their load, and confirm continuous two-channel power under the intended ambient temperature.

🔊

Compact Multimedia Speaker

TAS5101DAPR is suitable for compact multimedia speakers where a digital audio source feeds two passive speakers. A 15 W output per channel into 4 ohm is useful for desktop or room-filling systems that need more power than a small integrated analog amplifier can deliver. The Class D topology improves efficiency compared with linear amplification, while short-circuit and thermal protection add resilience. PCB implementation should minimize switched-output loop area and use robust copper paths from the supply pins to the exposed thermal pad.

📺

Soundbar Amplifier Section

The TAS5101DAPR can serve as the power-amplification section of a compact soundbar or television audio module when the source interface is compatible. Two independently amplified outputs support left and right channels at up to 15 W each into 4 ohm loads. Because the device is obsolete, it is most appropriate for maintaining an existing qualified design or a controlled legacy program. New soundbar platforms should also compare thermal efficiency, EMI filtering, standby behavior, and the availability of currently active amplifiers.

📱

Digital Audio Docking System

TAS5101DAPR is appropriate for a docking speaker receiving a digital audio stream and driving a two-channel speaker network. Its integrated digital input, stereo PWM outputs, shutdown capability, and protection features simplify the signal path compared with a separate digital receiver and analog power stage. The 4 ohm, 15 W per channel rating provides a usable stereo output target for compact portable or home-docking products. Validate digital timing, latency, mute behavior, and startup sequencing before production release.

⚙️

Auxiliary Audio Module

The TAS5101DAPR can implement a dedicated auxiliary audio module for an equipment enclosure, appliance, or control system that needs local speaker reinforcement. Its two-channel architecture allows the module to drive a left-right pair from one device, while protection functions address abnormal load or thermal conditions. The device is obsolete, so design work should account for lifecycle risk and include a second-source strategy. Confirm the digital input specification and shutdown control sequence before integrating it into new equipment.

🔋

Portable Battery Speaker

TAS5101DAPR can support battery-operated speakers when the available supply rail is sufficient for the desired output level. Class D operation is valuable in portable equipment because it reduces amplifier dissipation relative to a linear solution, while the integrated stereo output stage can drive two speakers from one package. Designers must still check supply headroom at the intended battery voltage, output-filter losses, thermal rise, and audible startup transients. A battery-current and standby-consumption analysis should be completed before approving the architecture.

What is the TAS5101DAPR?
The TAS5101DAPR is a Texas Instruments two-channel Class D stereo audio amplifier with digital inputs and an integrated PWM power output stage. It delivers up to 15 W per channel into a 4 ohm load and is offered in a 32-lead HTSSOP package. The manufacturer describes it as a true digital stereo audio amplifier, combining digital signal input, stereo amplification, short-circuit protection, thermal protection, and shutdown in one device.
How much power can TAS5101DAPR deliver?
The TAS5101DAPR can deliver 15 W per channel into a 4 ohm load, corresponding to 30 W total across its two output channels. This is the maximum stereo output rating identified for the device. Actual continuous output depends on supply voltage, thermal conditions, speaker impedance, and the implementation of the output stage and filtering network.
Where can I download the TAS5101DAPR datasheet PDF?
The TAS5101DAPR datasheet PDF is available through the manufacturer document link listed on this page. It documents the digital audio interface, power output stage, electrical characteristics, pin descriptions, protection behavior, and application information. Use that document when assigning all 32 package pins and before finalizing the output-filter and power-layout implementation.
Where can I find the TAS5101DAPR pinout?
The TAS5101DAPR pinout is defined in the manufacturer datasheet, whose link appears in the product record. The component uses a 32-lead HTSSOP package with gull-wing leads and an integrated stereo output stage. Assign signal, supply, ground, and exposed-pad connections from the datasheet pin-description table rather than inferring them from package position alone.
Is TAS5101DAPR suitable for stereo speaker designs?
Yes, TAS5101DAPR is suitable for stereo speaker designs because it provides two Class D output channels rated at 15 W each into 4 ohm speakers. Its digital audio input is intended for a digital source, and integrated short-circuit and thermal protection support robust operation. The power supply and PCB thermal design must still support simultaneous two-channel output.
What can replace the TAS5101DAPR?
TAS5101IDAPR is the closest documented candidate because it is compared with TAS5101DAPR and uses the same 32-TSSOP class of package. A valid replacement must also match digital-interface format, supply voltage, output power, filter expectations, control pins, and pin assignment. Confirm those details in the manufacturer datasheets before treating the candidate as a production drop-in replacement.
What is the best drop-in replacement for TAS5101DAPR?
TAS5101IDAPR is the best directly documented candidate for a TAS5101DAPR replacement because the parts are compared as possible alternatives and both are identified as 32-TSSOP audio amplifiers. The available cross-reference information does not establish every electrical rating, so engineers should verify input compatibility, output power, supply range, and shutdown behavior. No cross-brand drop-in candidate is documented.
Is TAS5101DAPR the same as TAS5101IDAPR?
TAS5101DAPR and TAS5101IDAPR are related Texas Instruments stereo Class D amplifiers listed in a direct comparison, but the available information does not prove that every internal function and electrical limit is identical. Both are associated with the 32-TSSOP package class. Check the pin descriptions and digital-interface timing before using TAS5101IDAPR as an unqualified substitute.
TAS5101DAPR vs TAS5101IDAPR: which is better for a digital speaker?
TAS5101DAPR is preferable when the original design specifically targets its documented 15 W x 2 output at 4 ohm and has been validated around its digital interface. TAS5101IDAPR may suit a drop-in redesign because it is directly associated with the same 32-TSSOP package class, but its complete electrical compatibility has not been established here. Choose it only after comparing the pin table, interface timing, supply limits, and protection thresholds.
When should I choose TAS5101DAPR over another Class D amplifier?
Choose TAS5101DAPR when the design needs a two-channel digital-input amplifier with a published 15 W per channel output into 4 ohm and a 32-lead HTSSOP implementation. It is particularly relevant to legacy or already validated products because the device is obsolete. For a new design, compare modern alternatives by efficiency, EMI, filter requirements, thermal performance, and lifecycle rather than assuming an obsolete amplifier is the lowest-risk choice.
Is TAS5101DAPR in stock?
Current stock should be requested through the Request a Quote form on this page because availability can change with quantity, package, and market conditions. The manufacturer-device listing identifies TAS5101DAPR as obsolete, so new production should include a lifecycle review. For an existing product, request a quotation for the exact 32-lead HTSSOP ordering code and confirm traceability requirements.
What is the price of TAS5101DAPR?
Use the Request a Quote form on this page to obtain the current unit price and available quantity for the exact TAS5101DAPR ordering code. Because the device is obsolete, availability may be limited and may depend on remaining factory inventory or qualified channel inventory. The form avoids presenting stale market figures for an end-of-life component.
What is the lead time for TAS5101DAPR?
The current lead time for TAS5101DAPR should be confirmed through the Request a Quote form on this page. As an obsolete part, its delivery schedule may depend on remaining factory stock, traceable inventory, and requested quantity. Include your required delivery date, annual usage, and acceptable traceability conditions so the supplier can quote the correct supply route.
How should TAS5101DAPR be handled for PCB thermal design?
TAS5101DAPR requires a PCB layout that supports its Class D switching output and the heat generated by the exposed package area. Connect the exposed pad to the appropriate supply and ground copper according to the manufacturer pin description, use multiple thermal vias where recommended, and keep output-current loops compact. Validate the finished assembly at maximum intended stereo load and ambient temperature.
What compliance information applies to TAS5101DAPR?
The RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status of TAS5101DAPR require confirmation from the manufacturer or the applicable compliance documentation for the purchased lot. Its commercial temperature grade and obsolete lifecycle status do not establish automotive qualification or environmental compliance. Request the relevant declarations before using the device in a regulated production program.

Technische Referenzdaten für TAS5101DAPR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose TAS5101DAPR when maintaining a qualified stereo design that uses digital audio input, a 32-lead HTSSOP footprint, and a published 15 W per channel into 4 ohm. Its integrated PWM output stage, short-circuit protection, thermal protection, and shutdown function make it suitable for powered speakers, multimedia enclosures, docking systems, and compact soundbar sections. Choose TAS5101IDAPR when a same-package family alternative is needed, but verify its digital interface, supply limits, output power, and control behavior before release. TAS5101DAP is the closest base-device match because its package and 15 W x 2 rating align, but the exact ordering and shipping format still matter. For a completely new product, evaluate currently active Class D amplifiers because TAS5101DAPR is obsolete. Do not select a replacement solely by package fit; interface timing, output-filter architecture, thermal constraints, EMI behavior, and lifecycle availability are equally important.

Vergleich mit Alternativen

Parameter Dieses Produkt TAS5101IDAPR TAS5101DAP TAS5102DAPR TAS5103DAPR TAS5104DAPR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 32-HTSSOP 32-TSSOP 32-TSSOP 32-HTSSOP 32-HTSSOP 32-HTSSOP
Amplifier Class Class D Class D Class D Class D Class D Class D

Wichtigste Unterscheidungsmerkmale

  • Published stereo output rating (vs. TAS5101DAP)
  • Same-package family replacement path (vs. TAS5101IDAPR)
  • Integrated protection for compact audio designs (vs. TAS5102DAPR)

Designhinweise

Treat the exposed pad as the primary heat-spreading connection in the 32-lead HTSSOP package. Follow the manufacturer land pattern and pin description for its electrical connection, provide multiple thermal vias where the layout permits, and use uninterrupted top and bottom copper. Validate both amplifier channels at the intended 4 ohm load and maximum ambient temperature so that output-power derating does not invalidate the design.

Place input decoupling, output-network components, and power-supply connections close to the associated package pins. Keep the Class D output current loops as small as practical and avoid routing high-current speaker paths through sensitive digital-audio areas. Separate noisy output and power-return currents from the digital input reference so switching transients do not appear as signal noise or unstable startup behavior.

The supply must support the combined peak and continuous current required by two Class D output channels, including the load, output-filter losses, and amplifier losses. Use low-ESR local decoupling and confirm supply ripple against the audio-performance requirements. Do not size the source only for the DC speaker power; Class D filtering and switching transients can increase peak supply demand.

Do not assume that identical 32-TSSOP packaging guarantees interchangeable operation. Before substituting a related device, compare the complete pin-description table, digital-audio interface, clock requirements, data format, output filter, power rails, shutdown polarity, and protection behavior. A PCB footprint match is only the first gate in determining drop-in compatibility.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product is identified as commercial grade and obsolete, but no specific environmental or automotive compliance declaration was established. Confirm lot-specific declarations before production use.

Ähnliche Suchanfragen

TAS5101DAPR TAS5101DAPR datasheet TAS5101DAPR datasheet pdf TAS5101DAPR pinout TAS5101DAPR equivalent TAS5101DAPR replacement TAS5101DAPR vs TAS5101IDAPR TAS5101DAPR footprint TAS5101DAPR price TAS5101DAPR stock Texas Instruments TAS5101DAPR TAS5101DAPR 32-HTSSOP amplifier TAS5101DAPR 15W stereo amplifier TAS5101DAPR powered speaker application

Verwandte Bauteile & Begriffe

Texas Instruments TAS5101DAPR TAS5101IDAPR TAS5101DAP TAS5102DAPR TAS5103DAPR TAS5104DAPR Class D amplifier digital audio amplifier stereo audio amplifier PWM power output stage power management IC semiconductor 32-HTSSOP TSSOP family surface-mount package SMD short-circuit protection thermal protection shutdown function powered speaker multimedia speaker digital audio input 4 ohm speaker load RoHS REACH AEC-Q100
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen