TAS5101DAPR - Stereo Class D Audio Amplifier | Texas Instruments
MPN: TAS5101DAPR ✗ Akhir HidupTAS5101DAPR Ringkasan
A Class D audio amplifier is a switching power amplifier that converts a digital or analog input signal into a pulse-width-modulated output. This approach offers much higher energy efficiency than a conventional linear audio amplifier because the output transistors operate primarily in their switching states rather than dissipating the full voltage difference continuously. The TAS5101DAPR therefore belongs to the digital audio power-amplifier category and the broader amplifier IC hierarchy used in portable speakers, home audio equipment, and compact consumer systems.
The principal advantages include a 15 W x 2 output capability at 4 ohm, a two-channel stereo configuration, and digital input support. These characteristics make the amplifier suitable for systems that need two amplified speaker outputs without using separate full-power amplifier channels. Integrated short-circuit and thermal protection improve robustness during overload or thermal stress, while shutdown provides a controlled path for disabling the amplifier when the system is inactive.
The HTSSOP package provides a compact implementation but requires deliberate power-layout and thermal-management practices. Its exposed power pad must be connected to the supply and ground planes according to the manufacturer pin description and layout guidance. Because Class D output stages carry switching current and high common-mode voltage, component placement, output-loop layout, speaker return routing, and ground-plane design can materially affect EMI, click-and-pop behavior, and thermal performance.
Typical uses include powered speakers, compact stereo audio systems, soundbar amplifier sections, multimedia speaker enclosures, portable docking systems, and auxiliary audio modules driven by a digital audio source. For a 4 ohm speaker network, the published 15 W x 2 rating provides a clear sizing point, although continuous power also depends on the supply capability, thermal design, signal format, and output-filter implementation.
The primary design consideration is that the amplifier's supply must support the switched output current while maintaining low ripple and adequate headroom. Place the input, output, and power-ground components close to their associated pins, keep high-current output loops compact, and verify copper and via capacity before loading both channels to their maximum rated output.
This product record combines package, lifecycle, output-power, protection, and application information with practical implementation guidance and drop-in candidate analysis. It helps engineers separate electrical compatibility from simple package similarity before committing to a replacement or redesign.
Alternatif penggantian untuk TAS5101DAPR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian TAS5101DAPR (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Class, Mounting Type, Number of Channels, Output Configuration, Package.
TAS5101IDAPR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TAS5101DAP
✅ Drop-InKontak untuk harga
Lihat Datasheet →TAS5102DAPR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
TAS5103DAPR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
TAS5104DAPR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
TAS5101DAPR Rating Maksimal & Karakteristik Listrik
| Product Type | Stereo Class D audio amplifier IC |
| Number of Channels | 2 channels |
| Amplifier Class | Class D |
| Konfigurasi Output | Stereo |
| Maximum Output Power per Channel | 15 W at 4 ohm |
| Total Maximum Output Power | 30 W across 2 channels |
| Input Type | Digital audio input |
| Output Stage | Integrated PWM stereo power output stage |
| Short-Circuit Protection | Yes |
| Thermal Protection | Yes |
| Shutdown Function | Yes |
| Paket | 32-lead HTSSOP |
| Tipe Mounting | Surface-mount SMD |
| Terminal Count | 32 terminals |
| Lead Form | Gull wing |
| Packaging | Tape and reel |
| Temperature Grade | Commercial |
| Status Lingkungan Hidup | Obsolete (EOL) |
TAS5101DAPR 32-lead htssop Diamant Konfigurasi Panduan
Konfigurasi pin untuk TAS5101DAPR (32-lead htssop pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk TAS5101DAPR.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
TAS5101DAPR cocok untuk 6 aplikasis: Powered Stereo Speaker, Compact Multimedia Speaker, Soundbar Amplifier Section, Digital Audio Docking System, Auxiliary Audio Module, Portable Battery Speaker.
Powered Stereo Speaker
The TAS5101DAPR fits powered speakers requiring two amplified channels and digital source input. Its published 15 W x 2 capability at 4 ohm provides a direct sizing point for compact stereo speaker pairs, while the integrated PWM output stage reduces the number of external power-amplifier sections. The 32-lead HTSSOP package still requires a carefully designed exposed-pad connection and low-impedance supply network. Engineers should verify the required digital format, configure the output filtering for their load, and confirm continuous two-channel power under the intended ambient temperature.
Compact Multimedia Speaker
TAS5101DAPR is suitable for compact multimedia speakers where a digital audio source feeds two passive speakers. A 15 W output per channel into 4 ohm is useful for desktop or room-filling systems that need more power than a small integrated analog amplifier can deliver. The Class D topology improves efficiency compared with linear amplification, while short-circuit and thermal protection add resilience. PCB implementation should minimize switched-output loop area and use robust copper paths from the supply pins to the exposed thermal pad.
Soundbar Amplifier Section
The TAS5101DAPR can serve as the power-amplification section of a compact soundbar or television audio module when the source interface is compatible. Two independently amplified outputs support left and right channels at up to 15 W each into 4 ohm loads. Because the device is obsolete, it is most appropriate for maintaining an existing qualified design or a controlled legacy program. New soundbar platforms should also compare thermal efficiency, EMI filtering, standby behavior, and the availability of currently active amplifiers.
Digital Audio Docking System
TAS5101DAPR is appropriate for a docking speaker receiving a digital audio stream and driving a two-channel speaker network. Its integrated digital input, stereo PWM outputs, shutdown capability, and protection features simplify the signal path compared with a separate digital receiver and analog power stage. The 4 ohm, 15 W per channel rating provides a usable stereo output target for compact portable or home-docking products. Validate digital timing, latency, mute behavior, and startup sequencing before production release.
Auxiliary Audio Module
The TAS5101DAPR can implement a dedicated auxiliary audio module for an equipment enclosure, appliance, or control system that needs local speaker reinforcement. Its two-channel architecture allows the module to drive a left-right pair from one device, while protection functions address abnormal load or thermal conditions. The device is obsolete, so design work should account for lifecycle risk and include a second-source strategy. Confirm the digital input specification and shutdown control sequence before integrating it into new equipment.
Portable Battery Speaker
TAS5101DAPR can support battery-operated speakers when the available supply rail is sufficient for the desired output level. Class D operation is valuable in portable equipment because it reduces amplifier dissipation relative to a linear solution, while the integrated stereo output stage can drive two speakers from one package. Designers must still check supply headroom at the intended battery voltage, output-filter losses, thermal rise, and audible startup transients. A battery-current and standby-consumption analysis should be completed before approving the architecture.
Data referensi engineering untuk TAS5101DAPR — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | TAS5101IDAPR | TAS5101DAP | TAS5102DAPR | TAS5103DAPR | TAS5104DAPR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 32-HTSSOP | 32-TSSOP | 32-TSSOP | 32-HTSSOP | 32-HTSSOP | 32-HTSSOP |
| Amplifier Class | Class D | Class D | Class D | Class D | Class D | Class D |
Diferensiator Kunci
- Published stereo output rating (vsTAS5101DAP)
- Same-package family replacement path (vsTAS5101IDAPR)
- Integrated protection for compact audio designs (vsTAS5102DAPR)
Catatan Desain
Treat the exposed pad as the primary heat-spreading connection in the 32-lead HTSSOP package. Follow the manufacturer land pattern and pin description for its electrical connection, provide multiple thermal vias where the layout permits, and use uninterrupted top and bottom copper. Validate both amplifier channels at the intended 4 ohm load and maximum ambient temperature so that output-power derating does not invalidate the design.
Place input decoupling, output-network components, and power-supply connections close to the associated package pins. Keep the Class D output current loops as small as practical and avoid routing high-current speaker paths through sensitive digital-audio areas. Separate noisy output and power-return currents from the digital input reference so switching transients do not appear as signal noise or unstable startup behavior.
The supply must support the combined peak and continuous current required by two Class D output channels, including the load, output-filter losses, and amplifier losses. Use low-ESR local decoupling and confirm supply ripple against the audio-performance requirements. Do not size the source only for the DC speaker power; Class D filtering and switching transients can increase peak supply demand.
Do not assume that identical 32-TSSOP packaging guarantees interchangeable operation. Before substituting a related device, compare the complete pin-description table, digital-audio interface, clock requirements, data format, output filter, power rails, shutdown polarity, and protection behavior. A PCB footprint match is only the first gate in determining drop-in compatibility.
Informasi Konformitas
The product is identified as commercial grade and obsolete, but no specific environmental or automotive compliance declaration was established. Confirm lot-specific declarations before production use.