TAS5121IDKD - 100W Mono Class D Amplifier | Texas Instruments
Teilenummer: TAS5121IDKD ✓ AktivTAS5121IDKD Übersicht
A Class D audio power amplifier is a switching amplifier that uses a differential output to develop speaker voltage efficiently. The TAS5121IDKD belongs to the digital audio amplifier hierarchy, where a digital audio source feeds a high-performance power stage that converts pulse-width-modulated signals into high-current audio output. This approach combines high output power with efficient power conversion, making the device suitable for home-theater, DVD-receiver, compact audio, and digital music-appliance systems.
Key electrical capabilities include up to 100 W RMS output into a 4 Ω load in bridge-tie-load operation. Digital inputs support direct connection to a digital audio source, reducing the need for separate analog-to-digital conversion in compatible systems. Integrated short-circuit and thermal protection improve robustness, while shutdown control permits the system to place the amplifier into a low-power state when it is not active. The exposed pad provides a thermal path from the device to the PCB copper area.
The 36-pin HSSOP is intended for surface-mount assembly and includes an exposed pad for heat dissipation. Its 11.00 mm package width provides a larger thermal and electrical land pattern than a compact leadless package. Correct PCB layout, low-inductance power connections, adequate input bypassing, and controlled return-current paths are important because Class D output stages can produce high transient currents even when the average audio power is moderate.
Typical applications include DVD receivers, home-theater audio systems, mini and micro component audio products, and internet music appliances. The 100 W capability is appropriate for compact room-filling speakers, multimedia systems, powered speaker designs, and other applications requiring high output power without a separate discrete output-transistor stage. A compatible codec can provide the required digital audio stream, while the TAS5121IDKD handles the high-power switching and speaker drive stage.
When laying out the circuit, use multiple ceramic capacitors close to the supply pins, connect the exposed pad to a continuous thermal copper plane, and keep the Class D speaker outputs away from sensitive analog and digital input traces. The output filter and speaker wiring must also be designed for high-current, high-frequency switched waveforms. The manufacturer datasheet should be consulted for the complete pin assignment, recommended application circuit, and power-supply component values.
This product page combines the manufacturer-device specifications, verified distributor listings, compatible same-package alternatives, and practical PCB and thermal guidance for engineers evaluating a 100 W mono Class D power stage. It also highlights the boundary between genuine drop-in choices and alternatives that require a PCB or interface redesign.
Drop-in-Alternativen für TAS5121IDKD – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit TAS5121IDKD (gleiche Bauform und Footprint) – abweichend in Maximum Output Power, Mounting Type, Package, Product Type.
TAS5121IDKDR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TAS5121IDKDRE4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TAS5121IDKDE4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TAS5121DKD
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →TAS5121IDKD Grenzwerte & elektrische Eigenschaften
| Product Type | Digital amplifier power stage |
| Amplifier Class | Class D |
| Channel Configuration | 1 channel (mono) |
| Maximum Output Power | 100 W RMS into 4 Ω |
| Output Topology | Bridge-tie-load (BTL) |
| Analog Supply Voltage Range | 10.8 V to 13.2 V |
| Digital Supply Voltage Range | 3 V to 3.6 V |
| Ausgangsspannungsbereich | 0 V to 32 V |
| Betriebstemperaturbereich | -40 °C to 85 °C (TA) |
| Gehäuse | 36-BSSOP, 11.00 mm width |
| Montageart | Surface mount |
| Exposed Thermal Pad | Present |
| Input Interface | Digital inputs |
| Short-Circuit Protection | Yes |
| Thermal Protection | Yes |
| Shutdown Control | Yes |
| Packaging Type | Tube |
TAS5121IDKD 36-bssop, 11.00 mm width Pinbelegungsleitfaden
Pinbelegung für TAS5121IDKD (36-bssop, 11.00 mm width-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für TAS5121IDKD.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
TAS5121IDKD ist geeignet für 6 Anwendungs: Home-Theater Power Amplifier, DVD Receiver Amplifier, Powered Speaker, Compact Subwoofer, Internet Music Appliance, Mini Audio Component.
Home-Theater Power Amplifier
The TAS5121IDKD is suitable for a home-theater power-amplifier channel requiring up to 100 W RMS into a 4 Ω speaker. Its digital input can receive a compatible audio stream directly, while the Class D bridge-tie-load stage supplies the required speaker voltage and current. The 10.8 V to 13.2 V analog supply and 3 V to 3.6 V digital supply must remain within their specified limits. A practical implementation should include local high-frequency supply bypassing, a continuous exposed-pad copper area, and an output filter selected for the speaker impedance and switching frequency. Integrated short-circuit and thermal protection provide fault handling, but they do not eliminate the need for sound thermal design.
Empfohlen
DVD Receiver Amplifier
The TAS5121IDKD fits a DVD-receiver power stage where a digital audio source must drive a 4 Ω speaker at up to 100 W RMS. Digital inputs simplify the signal path by accepting the receiver’s compatible digital audio stream without requiring an external DAC in the power-amplifier section. The device’s Class D topology improves conversion efficiency, while shutdown control supports receiver power-state management. Layout quality is critical because the Class D outputs carry high-frequency switched energy and can introduce EMI or instability if output loops are too large. Place input and supply bypassing close to the relevant pins, keep the BTL output path compact, and provide adequate thermal copper beneath the exposed pad.
Empfohlen
Powered Speaker
The TAS5121IDKD can serve as the power stage in an active or powered bookshelf speaker designed for a 4 Ω load and up to 100 W RMS. Its digital interface is useful when the speaker accepts a digital network or source signal, whereas an analog-input amplifier would require a separate conversion stage. The mono architecture maps directly to a conventional speaker channel. Designers should account for the two supply domains, implement the manufacturer’s recommended input and power-network components, and verify thermal performance for the enclosure’s heat dissipation. Short-circuit and thermal shutdown improve fault tolerance, but sustained near-limit playback should be validated at the intended ambient temperature and with the actual speaker impedance and filter network.
Empfohlen
Compact Subwoofer
The TAS5121IDKD is applicable to a compact Class D subwoofer amplifier when the target output is approximately 100 W RMS into 4 Ω and the source can provide a compatible digital signal. The high-power switching stage provides adequate drive for a compact speaker while requiring efficient conversion and controlled thermal rise. The 36-BSSOP exposed pad should be coupled to a deliberate copper area sized for the enclosure’s cooling capability. Because a subwoofer crossover is commonly placed before the power stage, its slope, phase response, and interaction with the device’s input characteristics must be evaluated together. Output-filter component tolerances should also be considered because they influence speaker current, stability, and harmonic behavior.
Empfohlen
Internet Music Appliance
The TAS5121IDKD supports an internet music appliance that receives digital audio and drives a speaker without a separate analog power-amplifier input stage. Its 100 W RMS capability can serve a compact room-filling speaker, while digital control permits coordinated shutdown when the appliance enters a low-power state. The implementation should separate sensitive digital-audio routing from the high-current Class D output path and maintain short supply connections to reduce switching noise. The exposed pad needs sufficient copper area and may require thermal spreading depending on enclosure airflow. Digital interface timing, sample-rate support, and the relationship between the source codec and amplifier inputs should be verified in the complete reference design rather than inferred from the power-stage rating alone.
Empfohlen
Mini Audio Component
The TAS5121IDKD can be incorporated into a mini or micro component that drives a 4 Ω speaker from a digital audio source. Its 100 W mono Class D output provides substantial power in a compact product, while the separate 3.3 V digital and approximately 12 V analog supplies allow the signal and power domains to be managed independently. The exposed-pad HSSOP footprint requires careful assembly and adequate copper rather than a minimal solder connection. Designers should follow the manufacturer’s recommended decoupling and output-filter network, keep copper losses and inductance low, and validate temperature rise in the final enclosure. If multiple channels are used, their switching nodes should be arranged to minimize crosstalk and unwanted coupling into the digital audio path.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für TAS5121IDKD – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | TAS5121IDKDR | TAS5121IDKDRE4 | TAS5121IDKDE4 | TAS5121DKD |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 36-BSSOP (11.00 mm width) with exposed pad | 36-BSSOP with exposed pad | 36-BSSOP with exposed pad | 36-BSSOP with exposed pad | 36-SSOP |
| Output Power | 100 W RMS into 4 Ω | 100 W | 100 W | 100 W | 100 W |
| Channel Configuration | 1 channel (mono) | 1 channel (mono) | 1 channel (mono) | 1 channel (mono) | 1 channel (mono) |
| Amplifier Class | Class D | Class D | Class D | Class D | Class D |
| Output Topology | Bridge-tie-load (BTL) | Bridge-tie-load | Bridge-tie-load | Bridge-tie-load | Bridge-tie-load |
| Digital Inputs | Yes | Yes | Yes | Yes | Yes |
| Short-Circuit Protection | Yes | Yes | Yes | Yes | Yes |
| Thermal Protection | Yes | Yes | Yes | Yes | Yes |
| Shutdown Function | Yes | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Direct digital-audio input supports a streamlined power-stage architecture (vs. TAS5121DKD)
- High output power is available from a surface-mount 36-pin package (vs. TAS5121IDKDR)
- Integrated fault protection supports robust speaker-drive operation (vs. TAS5121IDKDRE4)
Designhinweise
Connect the exposed pad to a continuous PCB copper area and use the manufacturer’s thermal-layout guidance for the 36-BSSOP footprint. Estimated maximum-load dissipation is approximately 12 W when the analog rail is 12 V and the stage delivers 100 W, before accounting for efficiency; actual heat in the package is lower, but it can still be substantial. Validate junction temperature in the final enclosure.
Place the recommended input, supply, and bypass capacitors directly beside their associated pins. Keep the 10.8 V to 13.2 V power loop and the 3 V to 3.6 V digital return path compact. The BTL outputs carry high-frequency switched current, so their routed area should be small, and sensitive audio or control traces should not run beneath or parallel to the speaker outputs.
Do not substitute the listed ordering variants without checking the mechanical drawing and exposed-pad connection. The alternative descriptions identify the same 36-pin package and principal 100 W mono Class D function, but production qualification still requires confirmation of supply limits, pin behavior, delivery form, and thermal performance. Also verify the output-filter component values against the intended speaker impedance.
Compliance-Informationen
The Texas Instruments manufacturer datasheet identifies the device as a digital amplifier power stage, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified. Compliance should be confirmed against the current manufacturer product documentation and the exact orderable MPN.