Texas Instruments

TAS5121IDKD - 100W Mono Class D Amplifier | Texas Instruments

MPN: TAS5121IDKD ✓ Active
10.8 V to 13.2 V Vdss 36-BSSOP, 11.00 mm width Package
MOQ: 1 |

TAS5121IDKD Overview

The Texas Instruments TAS5121IDKD is a 100 W mono Class D digital amplifier power stage with digital inputs, short-circuit protection, thermal shutdown, and shutdown control. It operates from a 10.8 V to 13.2 V analog supply, accepts a 3 V to 3.6 V digital supply, and is packaged in a 36-pin HSSOP with an exposed thermal pad. The device uses a bridged-tie-load topology to drive 4 Ω speakers from a single power stage.

A Class D audio power amplifier is a switching amplifier that uses a differential output to develop speaker voltage efficiently. The TAS5121IDKD belongs to the digital audio amplifier hierarchy, where a digital audio source feeds a high-performance power stage that converts pulse-width-modulated signals into high-current audio output. This approach combines high output power with efficient power conversion, making the device suitable for home-theater, DVD-receiver, compact audio, and digital music-appliance systems.

Key electrical capabilities include up to 100 W RMS output into a 4 Ω load in bridge-tie-load operation. Digital inputs support direct connection to a digital audio source, reducing the need for separate analog-to-digital conversion in compatible systems. Integrated short-circuit and thermal protection improve robustness, while shutdown control permits the system to place the amplifier into a low-power state when it is not active. The exposed pad provides a thermal path from the device to the PCB copper area.

The 36-pin HSSOP is intended for surface-mount assembly and includes an exposed pad for heat dissipation. Its 11.00 mm package width provides a larger thermal and electrical land pattern than a compact leadless package. Correct PCB layout, low-inductance power connections, adequate input bypassing, and controlled return-current paths are important because Class D output stages can produce high transient currents even when the average audio power is moderate.

Typical applications include DVD receivers, home-theater audio systems, mini and micro component audio products, and internet music appliances. The 100 W capability is appropriate for compact room-filling speakers, multimedia systems, powered speaker designs, and other applications requiring high output power without a separate discrete output-transistor stage. A compatible codec can provide the required digital audio stream, while the TAS5121IDKD handles the high-power switching and speaker drive stage.

When laying out the circuit, use multiple ceramic capacitors close to the supply pins, connect the exposed pad to a continuous thermal copper plane, and keep the Class D speaker outputs away from sensitive analog and digital input traces. The output filter and speaker wiring must also be designed for high-current, high-frequency switched waveforms. The manufacturer datasheet should be consulted for the complete pin assignment, recommended application circuit, and power-supply component values.

This product page combines the manufacturer-device specifications, verified distributor listings, compatible same-package alternatives, and practical PCB and thermal guidance for engineers evaluating a 100 W mono Class D power stage. It also highlights the boundary between genuine drop-in choices and alternatives that require a PCB or interface redesign.

Drop-in alternatives for TAS5121IDKD — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with TAS5121IDKD (same form factor and footprint) — differing in Maximum Output Power, Mounting Type, Package, Product Type.

Texas Instruments
Maximum Output Power: 100 W
Mounting Type: Surface-mount HSSOP
Package: 36-terminal HSSOP
Compare with TAS5121IDKD →

TAS5121IDKDR

✅ Drop-In
📦 36-BSSOP (11.00 mm width) with exposed pad
Identical 100 W mono Class D ratings and 36-pin package; 0% difference in the stated principal electrical parameters.

📋 Reference alternative (not in catalog)

TAS5121IDKDRE4

✅ Drop-In
📦 36-BSSOP (11.00 mm width) with exposed pad
Identical 100 W mono Class D ratings and 36-pin package; 0% difference in the stated principal electrical parameters.

📋 Reference alternative (not in catalog)

TAS5121IDKDE4

✅ Drop-In
📦 36-BSSOP (11.00 mm width) with exposed pad
Identical 100 W mono Class D ratings and 36-pin package; 0% difference in the stated principal electrical parameters.

📋 Reference alternative (not in catalog)

TAS5121DKD

✅ Drop-In
Texas Instruments
📦 36-BSSOP (11.00 mm width) with exposed pad
Mono Class D digital audio power stage · 100 W · 10.8 V to 13.2 V · 1 channel (mono) · 36-terminal HSSOP · 36 terminals · Gull wing · Rectangular

Contact for price

View Datasheet →

TAS5121IDKD Maximum Ratings & Electrical Characteristics

Product Type Digital amplifier power stage
Amplifier Class Class D
Channel Configuration 1 channel (mono)
Maximum Output Power 100 W RMS into 4 Ω
Output Topology Bridge-tie-load (BTL)
Analog Supply Voltage Range 10.8 V to 13.2 V
Digital Supply Voltage Range 3 V to 3.6 V
Output Voltage Range 0 V to 32 V
Operating Temperature Range -40 °C to 85 °C (TA)
Package 36-BSSOP, 11.00 mm width
Mounting Type Surface mount
Exposed Thermal Pad Present
Input Interface Digital inputs
Short-Circuit Protection Yes
Thermal Protection Yes
Shutdown Control Yes
Packaging Type Tube

TAS5121IDKD 36-bssop, 11.00 mm width Pin Configuration Guide

Pin configuration for TAS5121IDKD (36-bssop, 11.00 mm width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

36-bssop, 11.00 mm width package pinout diagram for TAS5121IDKD

No detailed pinout data available for TAS5121IDKD.

Refer to the datasheet for full pin configuration.

Typical Applications

TAS5121IDKD is suitable for 6 applications: Home-Theater Power Amplifier, DVD Receiver Amplifier, Powered Speaker, Compact Subwoofer, Internet Music Appliance, Mini Audio Component.

🎧

Home-Theater Power Amplifier

The TAS5121IDKD is suitable for a home-theater power-amplifier channel requiring up to 100 W RMS into a 4 Ω speaker. Its digital input can receive a compatible audio stream directly, while the Class D bridge-tie-load stage supplies the required speaker voltage and current. The 10.8 V to 13.2 V analog supply and 3 V to 3.6 V digital supply must remain within their specified limits. A practical implementation should include local high-frequency supply bypassing, a continuous exposed-pad copper area, and an output filter selected for the speaker impedance and switching frequency. Integrated short-circuit and thermal protection provide fault handling, but they do not eliminate the need for sound thermal design.

📺

DVD Receiver Amplifier

The TAS5121IDKD fits a DVD-receiver power stage where a digital audio source must drive a 4 Ω speaker at up to 100 W RMS. Digital inputs simplify the signal path by accepting the receiver’s compatible digital audio stream without requiring an external DAC in the power-amplifier section. The device’s Class D topology improves conversion efficiency, while shutdown control supports receiver power-state management. Layout quality is critical because the Class D outputs carry high-frequency switched energy and can introduce EMI or instability if output loops are too large. Place input and supply bypassing close to the relevant pins, keep the BTL output path compact, and provide adequate thermal copper beneath the exposed pad.

🔊

Powered Speaker

The TAS5121IDKD can serve as the power stage in an active or powered bookshelf speaker designed for a 4 Ω load and up to 100 W RMS. Its digital interface is useful when the speaker accepts a digital network or source signal, whereas an analog-input amplifier would require a separate conversion stage. The mono architecture maps directly to a conventional speaker channel. Designers should account for the two supply domains, implement the manufacturer’s recommended input and power-network components, and verify thermal performance for the enclosure’s heat dissipation. Short-circuit and thermal shutdown improve fault tolerance, but sustained near-limit playback should be validated at the intended ambient temperature and with the actual speaker impedance and filter network.

🔊

Compact Subwoofer

The TAS5121IDKD is applicable to a compact Class D subwoofer amplifier when the target output is approximately 100 W RMS into 4 Ω and the source can provide a compatible digital signal. The high-power switching stage provides adequate drive for a compact speaker while requiring efficient conversion and controlled thermal rise. The 36-BSSOP exposed pad should be coupled to a deliberate copper area sized for the enclosure’s cooling capability. Because a subwoofer crossover is commonly placed before the power stage, its slope, phase response, and interaction with the device’s input characteristics must be evaluated together. Output-filter component tolerances should also be considered because they influence speaker current, stability, and harmonic behavior.

🌐

Internet Music Appliance

The TAS5121IDKD supports an internet music appliance that receives digital audio and drives a speaker without a separate analog power-amplifier input stage. Its 100 W RMS capability can serve a compact room-filling speaker, while digital control permits coordinated shutdown when the appliance enters a low-power state. The implementation should separate sensitive digital-audio routing from the high-current Class D output path and maintain short supply connections to reduce switching noise. The exposed pad needs sufficient copper area and may require thermal spreading depending on enclosure airflow. Digital interface timing, sample-rate support, and the relationship between the source codec and amplifier inputs should be verified in the complete reference design rather than inferred from the power-stage rating alone.

🔧

Mini Audio Component

The TAS5121IDKD can be incorporated into a mini or micro component that drives a 4 Ω speaker from a digital audio source. Its 100 W mono Class D output provides substantial power in a compact product, while the separate 3.3 V digital and approximately 12 V analog supplies allow the signal and power domains to be managed independently. The exposed-pad HSSOP footprint requires careful assembly and adequate copper rather than a minimal solder connection. Designers should follow the manufacturer’s recommended decoupling and output-filter network, keep copper losses and inductance low, and validate temperature rise in the final enclosure. If multiple channels are used, their switching nodes should be arranged to minimize crosstalk and unwanted coupling into the digital audio path.

What is the TAS5121IDKD?
The TAS5121IDKD is a Texas Instruments 100 W mono Class D digital amplifier power stage. According to the manufacturer datasheet, it uses a bridge-tie-load output topology, accepts digital audio inputs, and is intended for high-power speaker drive in DVD receivers, home-theater systems, and compact audio products.
How much power can the TAS5121IDKD output?
The TAS5121IDKD can deliver up to 100 W RMS into a 4 Ω speaker load in bridge-tie-load operation. According to the Texas Instruments datasheet, the stage requires an analog supply of 10.8 V to 13.2 V and a digital supply of 3 V to 3.6 V for its stated operating configuration.
What supply voltage does the TAS5121IDKD require?
The TAS5121IDKD uses two supply domains: 10.8 V to 13.2 V for the power stage and 3 V to 3.6 V for the digital interface. According to the manufacturer datasheet, maintaining both rails within their specified ranges is essential for correct operation and reliable audio output.
Where can I download the TAS5121IDKD datasheet PDF?
The official Texas Instruments datasheet is available through the manufacturer’s TAS5121 document link on this page. The datasheet contains the 36-BSSOP pin assignment, application circuit, external component recommendations, protection behavior, and thermal-layout guidance needed for a complete hardware design.
Where can I find the TAS5121IDKD pinout?
The TAS5121IDKD pin assignment is found in the pin-description table of the official Texas Instruments datasheet. The component uses a 36-pin HSSOP with an exposed pad, so the pin table should be used to distinguish power terminals, digital inputs, ground connections, and the exposed thermal pad during PCB routing.
Is the TAS5121IDKD suitable for a home-theater amplifier?
The TAS5121IDKD is suitable for a home-theater power-amplifier channel requiring 100 W RMS output into 4 Ω. Its digital input, Class D efficiency, short-circuit protection, thermal shutdown, and exposed-pad thermal design align with the manufacturer’s stated DVD receiver, home-theater, and mini or micro component applications.
What can replace the TAS5121IDKD?
The closest documented drop-in choices are TAS5121IDKDR, TAS5121IDKDRE4, TAS5121IDKDE4, and TAS5121DKD, all of which use the 36-pin HSSOP format and retain the 100 W mono Class D function. Confirm package suffix, delivery form, supply requirements, pin behavior, and thermal conditions before production substitution.
Can TAS5121IDKDR replace the TAS5121IDKD?
Yes, the TAS5121IDKDR is documented as a complete replacement for the TAS5121IDKD because the terminals, package, and principal functional characteristics are consistent. Both are 36-pin, 100 W Texas Instruments mono Class D devices, but the ordering suffix should still be checked against the required delivery format and purchasing documentation.
TAS5121IDKD vs TAS5121DKD: which is the better replacement?
The TAS5121DKD is the better match when its documented 100 W mono Class D functionality and 36-SSOP pin configuration match the original circuit. The manufacturer listing for TAS5121IDKD identifies a 36-HSSOP package, so engineers should verify the mechanical drawing, exposed-pad connection, and ordering suffix before using it as a production replacement.
When should I choose the TAS5121IDKD instead of an analog power amplifier?
Choose the TAS5121IDKD when the system already supplies a compatible digital audio stream and needs up to 100 W RMS into 4 Ω. Compared with an analog-input power amplifier, it removes the need for a separate digital-to-analog conversion path, while requiring careful digital-interface timing and Class D output-filter implementation.
Is TAS5121IDKD suitable for a powered speaker or compact subwoofer?
The TAS5121IDKD can suit a powered speaker or compact subwoofer designed around a 100 W Class D channel into 4 Ω. The key constraints are the 10.8 V to 13.2 V analog rail, 3 V to 3.6 V digital rail, correct speaker-filter design, and a PCB that removes heat from the exposed thermal pad.
How should the TAS5121IDKD be thermally managed?
Thermal management should begin with the exposed pad connected to a continuous PCB copper area and, when required, a heat spreader or heatsink. The manufacturer datasheet describes short-circuit and thermal protection, but those functions do not replace adequate copper area, low-loss power routing, and control of dissipation under sustained maximum output.
Where can I buy TAS5121IDKD and what is the lead time?
Use the “Request a Quote” form on this page to ask about TAS5121IDKD availability, current lead time, and order quantity. The form provides the appropriate purchasing channel without embedding a stale price or unconfirmed stock statement, both of which can vary with production status and order volume.
What is the price of TAS5121IDKD?
The current commercial price for TAS5121IDKD should be obtained through the “Request a Quote” form on this page. The device is supplied in tube packaging according to its distributor listing, and the requested quotation should reflect the exact MPN, quantity, delivery requirements, and any production-volume considerations.
Is TAS5121IDKD in stock?
Current TAS5121IDKD stock status should be confirmed through the “Request a Quote” form on this page. Inventory can change independently of lifecycle status, so engineers should request the quantity and packaging required for the production build rather than relying on a general availability statement.
What are the key specifications of TAS5121IDKD that engineers should know?
The key TAS5121IDKD specifications are 100 W RMS output into 4 Ω, mono Class D operation, a 10.8 V to 13.2 V analog supply, a 3 V to 3.6 V digital supply, and a 36-BSSOP package with an exposed pad. It also includes digital inputs, short-circuit protection, thermal shutdown, and shutdown control.

Engineering reference data for TAS5121IDKD — comparison, design guidance, and compliance information.

Selection Guide

Choose TAS5121IDKD when the design needs a 100 W RMS mono Class D stage, a digital audio input, and a 36-BSSOP implementation. It is especially appropriate for DVD receivers, home-theater amplifiers, powered speakers, compact subwoofers, and internet music appliances that can provide compatible digital audio. TAS5121IDKDR is the preferred first alternative when its ordering and delivery requirements satisfy production; TAS5121IDKDRE4 and TAS5121IDKDE4 are additional same-package choices, while TAS5121DKD requires particular attention to mechanical and ordering-code verification. None of these choices removes the need to validate supply rails, exposed-pad thermal performance, output filtering, EMI control, and shutdown sequencing. A different Class D amplifier with a different package, interface, or power rating should be treated as a redesign candidate rather than a drop-in replacement.

Comparison with Alternatives

Parameter This Product TAS5121IDKDR TAS5121IDKDRE4 TAS5121IDKDE4 TAS5121DKD
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 36-BSSOP (11.00 mm width) with exposed pad 36-BSSOP with exposed pad 36-BSSOP with exposed pad 36-BSSOP with exposed pad 36-SSOP
Output Power 100 W RMS into 4 Ω 100 W 100 W 100 W 100 W
Channel Configuration 1 channel (mono) 1 channel (mono) 1 channel (mono) 1 channel (mono) 1 channel (mono)
Amplifier Class Class D Class D Class D Class D Class D
Output Topology Bridge-tie-load (BTL) Bridge-tie-load Bridge-tie-load Bridge-tie-load Bridge-tie-load
Digital Inputs Yes Yes Yes Yes Yes
Short-Circuit Protection Yes Yes Yes Yes Yes
Thermal Protection Yes Yes Yes Yes Yes
Shutdown Function Yes Yes Yes Yes Yes

Key Differentiators

  • Direct digital-audio input supports a streamlined power-stage architecture (vs TAS5121DKD)
  • High output power is available from a surface-mount 36-pin package (vs TAS5121IDKDR)
  • Integrated fault protection supports robust speaker-drive operation (vs TAS5121IDKDRE4)

Design Notes

Connect the exposed pad to a continuous PCB copper area and use the manufacturer’s thermal-layout guidance for the 36-BSSOP footprint. Estimated maximum-load dissipation is approximately 12 W when the analog rail is 12 V and the stage delivers 100 W, before accounting for efficiency; actual heat in the package is lower, but it can still be substantial. Validate junction temperature in the final enclosure.

Place the recommended input, supply, and bypass capacitors directly beside their associated pins. Keep the 10.8 V to 13.2 V power loop and the 3 V to 3.6 V digital return path compact. The BTL outputs carry high-frequency switched current, so their routed area should be small, and sensitive audio or control traces should not run beneath or parallel to the speaker outputs.

Do not substitute the listed ordering variants without checking the mechanical drawing and exposed-pad connection. The alternative descriptions identify the same 36-pin package and principal 100 W mono Class D function, but production qualification still requires confirmation of supply limits, pin behavior, delivery form, and thermal performance. Also verify the output-filter component values against the intended speaker impedance.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The Texas Instruments manufacturer datasheet identifies the device as a digital amplifier power stage, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified. Compliance should be confirmed against the current manufacturer product documentation and the exact orderable MPN.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

TAS5121IDKD datasheet TAS5121IDKD pinout TAS5121IDKD datasheet pdf TAS5121IDKD equivalent TAS5121IDKD replacement TAS5121IDKD cross reference TAS5121IDKD vs TAS5121DKD TAS5121IDKD 100W mono amplifier TAS5121IDKD Class D power stage TAS5121IDKD 36-BSSOP Texas Instruments TAS5121IDKD TAS5121IDKD price TAS5121IDKD stock

Related Components & Terms

Texas Instruments TAS5121IDKD TAS5121IDKDR TAS5121IDKDRE4 TAS5121IDKDE4 TAS5121DKD Class D amplifier digital amplifier power stage audio power amplifier bridge-tie-load BTL digital audio input 100 W RMS 4 Ω speaker 36-BSSOP HSSOP surface mount SMD exposed thermal pad short-circuit protection thermal shutdown DVD receiver home theater powered speaker digital music appliance
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details