Texas Instruments

TAS5631BDKD - 300W Stereo Class-D Power Stage | TI

Teilenummer: TAS5631BDKD ✓ Aktiv
25 V to 52.5 V Vdss 44-pin HSSOP (DKD) Package
MOQ: 1 |

TAS5631BDKD Übersicht

The Texas Instruments TAS5631BDKD is a PWM-input Class-D audio power amplifier designed for a 300 W stereo output or a 400 W mono output from a single 50 V supply. It uses PurePath HD integrated closed-loop feedback and is packaged in a 44-pin HSSOP power package identified by the DKD ordering code. The device also supports 25 V to 52.5 V supply operation.

A Class-D audio amplifier is a switching power amplifier that converts a PWM input into a high-frequency, high-current bridge output capable of driving loudspeakers efficiently. The Class-D hierarchy includes audio amplifiers, power amplifiers, amplifiers, and integrated circuits. Compared with a conventional linear amplifier, a Class-D stage generally shifts more of its output power into the speaker rather than dissipating it as heat inside the output devices.

The TAS5631B family combines a PWM input interface with integrated closed-loop speaker feedback. Texas Instruments describes signal bandwidth up to 80 kHz and distortion below 0.03% as characteristic benefits of PurePath HD operation. The DKD package includes a two-level thermal-protection system: an active-low over-temperature warning asserts when junction temperature exceeds 125°C typically, followed by shutdown when junction temperature exceeds 155°C typically.

The integrated feedback architecture continuously corrects output voltage error at the speaker, reducing the effect of speaker impedance variation and improving distortion performance. This makes the device suitable for high-power audio systems in which predictable bass response, low distortion, and stable operation across different speaker loads are important. The amplifier accepts PWM audio, so the upstream signal chain must generate a suitable PWM waveform.

Typical uses include powered speakers, home-theater and professional audio equipment, multimedia enclosures, subwoofer systems, and compact high-output audio amplifiers. Mono operation can provide up to 400 W from the combined bridge outputs, while stereo operation can provide up to 300 W. The high supply voltage and substantial output capability require careful power-stage layout, thermal management, filtering, and speaker protection.

Designers should follow the pin-description table and recommended layout in the manufacturer datasheet when assigning PCB tracks. The power device needs a low-impedance supply network, output inductors selected for the switching current, and an output-filter network designed for the intended speaker impedance. Thermal performance should be evaluated across maximum ambient temperature and worst-case music or sine-wave loading rather than from nominal output power alone.

This page combines the manufacturer electrical and thermal ratings with application guidance, replacement analysis, and practical PCB considerations. Those engineering details help distinguish a genuine pin-compatible substitution from a merely similar Class-D amplifier and make the TAS5631BDKD easier to evaluate for professional, consumer, and industrial audio designs.

Drop-in-Alternativen für TAS5631BDKD – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

TAS5630BDKD

✅ Drop-In
📦 44-HSSOP (DKD)
Related 300 W-class TI power stage in the same DKD package; detailed output, supply, and pin differences require comparison against the manufacturer datasheets

📋 Referenzalternative (nicht im Katalog)

TAS5631BDKD Grenzwerte & elektrische Eigenschaften

Product Type PWM-input Class-D audio power amplifier
Channel Configuration 1-channel mono or 2-channel stereo
Maximum Stereo Output Power 300 W at 50 V supply
Maximum Mono Output Power 400 W at 50 V supply
Supply Voltage Range 25 V to 52.5 V
Signal Bandwidth Up to 80 kHz
Total Harmonic Distortion Less than 0.03%
Feedback Architecture PurePath HD integrated closed-loop feedback
Over-Temperature Warning Threshold 125°C typical junction temperature
Thermal Shutdown Threshold 155°C typical junction temperature
Gehäuse 44-pin HSSOP (DKD)
Montageart Surface mount
Input Signal Type PWM
Recommended Speaker Impedance 4 ohm to 8 ohm

TAS5631BDKD 44-pin hssop (dkd) Pinbelegungsleitfaden

Pinbelegung für TAS5631BDKD (44-pin hssop (dkd)-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für TAS5631BDKD im 44-pin hssop (dkd)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TAS5631BDKD.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TAS5631BDKD ist geeignet für 6 Anwendungs: High-Power Stereo Speaker, Professional Monitor Speaker, Subwoofer Power Amplifier, Home Theater Multi-Channel Amplifier, Live Sound Reinforcement Amplifier, Multimedia Audio Amplifier.

🎧

High-Power Stereo Speaker

The TAS5631BDKD suits a high-output stereo speaker amplifier because it can deliver up to 300 W per channel from a 50 V supply while maintaining a 4-ohm to 8-ohm load capability. The PWM input can be driven directly by an audio modulator, and PurePath HD feedback corrects output-voltage error at the speaker. In implementation, the device drives a half-bridge output network through inductor and LC filtering. Designers should size those components for the required switching current, verify thermal performance at continuous full-power operation, and add protection against speaker faults and excessive DC.

🎧

Professional Monitor Speaker

A professional monitor amplifier benefits from the TAS5631BDKD's combination of 300 W stereo capability, integrated closed-loop feedback, and distortion below 0.03%. The feedback system helps preserve a controlled output when loudspeaker impedance varies with frequency, which is important for consistent monitoring performance. Place the power stage close to the output inductors and LC filter, and use a clean, low-noise supply. The PWM source must provide adequate signal swing, while the amplifier's thermal design must account for sustained program material rather than only short peak-power measurements.

🔊

Subwoofer Power Amplifier

The TAS5631BDKD can support a high-power subwoofer stage in bridge-connected mono operation, with the manufacturer specifying up to 400 W from a 50 V supply. Its integrated feedback is valuable in a subwoofer because low-frequency load impedance can vary considerably. The amplifier should be followed by an inductor and LC output filter matched to the selected subwoofer impedance and crossover plan. Designers must also verify amplifier stability, filter component heating, DC offset behavior, and speaker excursion limits, because high electrical power does not automatically translate into safe mechanical output for the driver.

📺

Home Theater Multi-Channel Amplifier

The TAS5631BDKD can serve as a high-power amplification stage in a home-theater or multichannel audio system that uses PWM signals from a digital audio processor. Its 300 W stereo capability offers substantial headroom for demanding loudspeakers, while the 400 W mono rating supports bridge-driven subwoofer channels. A practical design should partition amplification across appropriately rated channels, preserve clean ground and power returns, and provide separate filtering for each speaker load. Use the DKD thermal pad as part of the heat-transfer path and confirm that the enclosure supports sustained operation at the calculated junction temperature.

🏭

Live Sound Reinforcement Amplifier

The TAS5631BDKD is appropriate for a live-sound power amplifier requiring high continuous output, integrated feedback, and a wide audio signal bandwidth. Texas Instruments specifies signal bandwidth up to 80 kHz and distortion below 0.03% for the PurePath HD architecture, supporting high-fidelity reproduction of demanding program material. The output-network design must tolerate the amplifier's switching current without adding audible coloration. In addition to correct filtering, use robust speaker protection, controlled power-supply sequencing, and thermal margins that reflect concert use rather than a short-duration laboratory load.

💻

Multimedia Audio Amplifier

The TAS5631BDKD can serve as the power stage in a multimedia or installation amplifier when the source system provides a PWM audio waveform. Its high-power capability supports low-impedance speakers, while integrated feedback helps maintain output control across their operating range. The implementation should include a low-impedance 50 V supply, short high-current paths, properly rated output inductors, and an LC filter matched to the speaker network. Component tolerances and thermal behavior should be checked over the full enclosure temperature range, especially in compact systems where heat dissipation is more restricted than the IC package alone would suggest.

What is the TAS5631BDKD and what output power can it deliver?
The TAS5631BDKD is a PWM-input Class-D audio power amplifier rated for up to 300 W stereo output or 400 W mono output from a single 50 V supply. According to the Texas Instruments TAS5631B product page, it can drive 4-ohm to 8-ohm speakers and uses PurePath HD integrated closed-loop feedback. The DKD ordering option is supplied in a 44-pin HSSOP power package.
What is the operating voltage of TAS5631BDKD?
The TAS5631BDKD operates from a 25 V to 52.5 V supply. Texas Instruments describes the device as a 300 W stereo, 400 W mono Class-D amplifier operating from a 50 V supply. Because this is a high-voltage power stage, the PCB must prevent accidental contact with exposed supply nodes and must maintain adequate creepage and clearance around high-voltage copper.
Where can I download the TAS5631BDKD datasheet PDF?
The official TAS5631BDKD datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tas5631b.pdf. It contains the complete DKD pin description, electrical characteristics, application information, thermal-protection behavior, output-filter guidance, and recommended PCB layout. Use the manufacturer document when assigning all 44 package pins rather than relying on a generic amplifier pinout.
Where can I find the TAS5631BDKD pinout?
The TAS5631BDKD pinout is found in the pin-description table and package drawing in the Texas Instruments TAS5631B datasheet. The device uses a 44-pin HSSOP DKD package. Identify the exposed thermal pad separately from the numbered signal and power pins, and follow the datasheet's recommended layout for the high-current supply and bridge-output connections.
What does PurePath HD feedback provide in TAS5631BDKD?
PurePath HD provides integrated closed-loop feedback that corrects output-voltage error at the speaker rather than relying only on the power-stage output. The Texas Instruments TAS5631B documentation associates this architecture with signal bandwidth up to 80 kHz and distortion below 0.03%. It also helps reduce the effect of speaker-impedance variation on the reproduced audio waveform.
How does the TAS5631BDKD thermal protection work?
The TAS5631BDKD DKD package uses two thermal-protection levels. According to the Texas Instruments TAS5631B datasheet, the active-low OTW warning asserts when junction temperature exceeds 125°C typically. If junction temperature continues to rise beyond 155°C typically, the device enters thermal shutdown and sets all half-bridge outputs to a safe state.
Can TAS5631BDKD drive 4-ohm and 8-ohm speakers?
Yes, the TAS5631BDKD is intended for 4-ohm to 8-ohm speaker loads. Texas Instruments specifies up to 300 W stereo output from a 50 V supply. The output inductor and LC filter must be selected for the switching current and target speaker impedance, while speaker protection should account for the very high peak power available from the amplifier.
What input format does TAS5631BDKD require?
The TAS5631BDKD requires a PWM audio input rather than a conventional analog line-level signal. The upstream audio processor or modulator must produce a valid PWM waveform with the expected amplitude, timing, and duty-cycle characteristics. Texas Instruments labels the product as a PWM-input Class-D power stage, so an analog-to-PWM conversion stage is required ahead of the amplifier.
TAS5631BDKD vs TAS5630BDKD: which power stage fits the design?
The TAS5631BDKD is the 300 W stereo and 400 W mono member of the TAS5631B family, while the TAS5630BDKD is a closely related TI Class-D power stage that also appears in the DKD package. Because the current comparison does not provide a complete verified parameter table for the TAS5630BDKD, compare supply range, output power, control interfaces, pin functions, and thermal limits in both manufacturer datasheets before substitution.
What can replace TAS5631BDKD?
A valid replacement for TAS5631BDKD must match the 44-pin DKD footprint, preserve the PWM input and PurePath HD feedback architecture, and satisfy the 25 V to 52.5 V supply and high-power output requirements. Only one distinct same-package family alternative was identified without padding the list with packaging-only variants. Confirm pin functions, output ratings, thermal protection, and application-circuit requirements before approving any substitute.
When should I choose TAS5631BDKD instead of a lower-power Class-D amplifier?
Choose the TAS5631BDKD when the design needs high-power stereo or mono operation, a 25 V to 52.5 V supply, integrated speaker feedback, and output capability up to 300 W stereo or 400 W mono. A lower-power amplifier may be preferable when the load requires less power, but it may not reproduce the same headroom or speaker-control performance.
Is TAS5631BDKD suitable for a professional powered speaker?
The TAS5631BDKD is suitable for professional powered-speaker designs that use a PWM audio input and require high output power with integrated feedback. Its 300 W stereo and 400 W mono capability provides substantial power headroom, while PurePath HD feedback supports low-distortion output. The amplifier still requires a compliant power supply, output filtering, thermal design, and appropriate speaker protection.
What is the best Texas Instruments equivalent for TAS5631BDKD?
The closest identified Texas Instruments family alternative is the TAS5630BDKD because it is associated with the same DKD package and closely related Class-D power-stage category. It should not be considered an automatic drop-in replacement without a full pin and parameter review. No cross-brand equivalent with verified pin compatibility and sufficient parametric proximity was established.
Where can I buy TAS5631BDKD and check its lead time?
Use the Request a Quote form on this page to request TAS5631BDKD pricing, current stock, lead time, and package quantity. The request should identify the exact 44-pin DKD ordering code TAS5631BDKD so that the quote reflects the correct device rather than a different package or reel-code variant.
Is TAS5631BDKD in stock and how much does it cost?
Current inventory and a firm unit quotation for TAS5631BDKD are obtained through the Request a Quote form on this page. Stock status can change by package, quantity, and supply channel, so it should be confirmed at order time. The form also supports requests for scheduled delivery and bulk production quantities.

Technische Referenzdaten für TAS5631BDKD – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose TAS5631BDKD for a high-power Class-D design requiring a PWM input, integrated closed-loop speaker feedback, and up to 300 W stereo or 400 W mono operation from a 50 V supply. It is particularly suitable for professional powered speakers, high-output multimedia amplifiers, and bridge-connected subwoofer stages. TAS5630BDKD is the closest identified Texas Instruments family alternative in the same DKD package, but it should be selected only after checking its complete pin map, supply range, output ratings, and feedback configuration. Neither option should be chosen solely from package dimensions. If the design cannot provide a PWM source, operates below 25 V, or requires a much lower output-power level, a different amplifier architecture may be more appropriate. Validate the final choice against speaker impedance, filter design, thermal limits, protection requirements, and PCB constraints.

Vergleich mit Alternativen

Parameter Dieses Produkt TAS5630BDKD
Brand Texas Instruments Texas Instruments
Package 44-HSSOP (DKD) 44-HSSOP (DKD)
Amplifier Type PWM-input Class-D audio power amplifier Class-D audio power amplifier

Wichtigste Unterscheidungsmerkmale

  • Higher documented output capability (vs. TAS5630BDKD)
  • Integrated closed-loop speaker feedback (vs. TAS5630BDKD)
  • Two-level thermal protection (vs. TAS5630BDKD)

Designhinweise

Use the Texas Instruments TAS5631B recommended PCB layout as the electrical and mechanical foundation. Keep the high-current supply, bridge-output, ground, and feedback routes short and wide, with low-impedance decoupling placed directly at the relevant pins. Route the feedback connection as specified so the closed-loop system is not disturbed by high-current switching paths. A 44-pin HSSOP power package requires careful thermal-pad connection and controlled copper-plane temperature rise.

Evaluate thermal performance at the maximum ambient temperature, maximum supply voltage, and intended continuous load. The DKD package warns above a 125°C typical junction temperature and shuts down above 155°C typical, but those thresholds are not substitutes for a thermal design. Use the exposed pad and copper pours as a heat spreader, minimize thermal impedance through the board, and avoid relying on the warning signal as normal operating control. Verify output inductors, capacitors, and nearby components for self-heating.

Design the 25 V to 52.5 V supply path for the high switching current demanded by a 300 W stereo or 400 W mono output. Place bulk and local decoupling where they can supply transient current without long loop inductance, and provide a low-impedance ground return for the power stage. Select output inductors and LC-filter components for the target 4-ohm to 8-ohm load, switching current, allowable loss, and saturation margin. Confirm that the upstream PWM source has adequate amplitude and timing margins.

Do not treat a matching package name as proof that an amplifier is a drop-in replacement. A valid substitution must preserve the DKD footprint, pin functions, supply range, PWM interface, feedback implementation, output topology, and thermal limits. Also check the required output-filter component values and control-signal polarity. Use the pin-description table in the manufacturer datasheet when assigning tracks, particularly for exposed-pad, supply, feedback, and power-stage connections.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status was not established from the available manufacturer and distributor records. Review the current TI product page and applicable declarations before release to production.

Ähnliche Suchanfragen

TAS5631BDKD datasheet TAS5631BDKD datasheet pdf TAS5631BDKD pinout TAS5631BDKD 300W stereo amplifier TAS5631BDKD 44-HSSOP TAS5631BDKD power supply TAS5631BDKD vs TAS5630BDKD TAS5631BDKD drop-in replacement TAS5631BDKD equivalent amplifier TAS5631BDKD price TAS5631BDKD stock Texas Instruments TAS5631BDKD TAS5631BDKD schematic TAS5631BDKD application circuit 44-HSSOP PWM Class-D amplifier

Verwandte Bauteile & Begriffe

Texas Instruments TAS5631BDKD TAS5631B TAS5630BDKD Class-D amplifier audio power amplifier PWM-input amplifier PurePath HD integrated closed-loop feedback half-bridge power management IC 44-HSSOP DKD package surface-mount package 300 W stereo power 400 W mono power 25 V to 52.5 V supply total harmonic distortion signal bandwidth thermal shutdown over-temperature warning 4-ohm speaker 8-ohm speaker PWM audio professional audio
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen