TAS5631BDKD - 300W Stereo Class-D Power Stage | TI
部品番号: TAS5631BDKD ✓ 生産中TAS5631BDKD 概要
A Class-D audio amplifier is a switching power amplifier that converts a PWM input into a high-frequency, high-current bridge output capable of driving loudspeakers efficiently. The Class-D hierarchy includes audio amplifiers, power amplifiers, amplifiers, and integrated circuits. Compared with a conventional linear amplifier, a Class-D stage generally shifts more of its output power into the speaker rather than dissipating it as heat inside the output devices.
The TAS5631B family combines a PWM input interface with integrated closed-loop speaker feedback. Texas Instruments describes signal bandwidth up to 80 kHz and distortion below 0.03% as characteristic benefits of PurePath HD operation. The DKD package includes a two-level thermal-protection system: an active-low over-temperature warning asserts when junction temperature exceeds 125°C typically, followed by shutdown when junction temperature exceeds 155°C typically.
The integrated feedback architecture continuously corrects output voltage error at the speaker, reducing the effect of speaker impedance variation and improving distortion performance. This makes the device suitable for high-power audio systems in which predictable bass response, low distortion, and stable operation across different speaker loads are important. The amplifier accepts PWM audio, so the upstream signal chain must generate a suitable PWM waveform.
Typical uses include powered speakers, home-theater and professional audio equipment, multimedia enclosures, subwoofer systems, and compact high-output audio amplifiers. Mono operation can provide up to 400 W from the combined bridge outputs, while stereo operation can provide up to 300 W. The high supply voltage and substantial output capability require careful power-stage layout, thermal management, filtering, and speaker protection.
Designers should follow the pin-description table and recommended layout in the manufacturer datasheet when assigning PCB tracks. The power device needs a low-impedance supply network, output inductors selected for the switching current, and an output-filter network designed for the intended speaker impedance. Thermal performance should be evaluated across maximum ambient temperature and worst-case music or sine-wave loading rather than from nominal output power alone.
This page combines the manufacturer electrical and thermal ratings with application guidance, replacement analysis, and practical PCB considerations. Those engineering details help distinguish a genuine pin-compatible substitution from a merely similar Class-D amplifier and make the TAS5631BDKD easier to evaluate for professional, consumer, and industrial audio designs.
ドロップイン代替品: TAS5631BDKD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
TAS5630BDKD
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TAS5631BDKD 最大定格&電気的特性
| Product Type | PWM-input Class-D audio power amplifier |
| Channel Configuration | 1-channel mono or 2-channel stereo |
| Maximum Stereo Output Power | 300 W at 50 V supply |
| Maximum Mono Output Power | 400 W at 50 V supply |
| Supply Voltage Range | 25 V to 52.5 V |
| Signal Bandwidth | Up to 80 kHz |
| Total Harmonic Distortion | Less than 0.03% |
| Feedback Architecture | PurePath HD integrated closed-loop feedback |
| Over-Temperature Warning Threshold | 125°C typical junction temperature |
| Thermal Shutdown Threshold | 155°C typical junction temperature |
| パッケージ | 44-pin HSSOP (DKD) |
| 実装タイプ | Surface mount |
| Input Signal Type | PWM |
| Recommended Speaker Impedance | 4 ohm to 8 ohm |
TAS5631BDKD 44-pin hssop (dkd) ピン配置ガイド
TAS5631BDKD (44-pin hssop (dkd) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: TAS5631BDKD.
詳細は データシート をご参照ください。
主な用途
TAS5631BDKD の用途: 6 件s: High-Power Stereo Speaker, Professional Monitor Speaker, Subwoofer Power Amplifier, Home Theater Multi-Channel Amplifier, Live Sound Reinforcement Amplifier, Multimedia Audio Amplifier.
High-Power Stereo Speaker
The TAS5631BDKD suits a high-output stereo speaker amplifier because it can deliver up to 300 W per channel from a 50 V supply while maintaining a 4-ohm to 8-ohm load capability. The PWM input can be driven directly by an audio modulator, and PurePath HD feedback corrects output-voltage error at the speaker. In implementation, the device drives a half-bridge output network through inductor and LC filtering. Designers should size those components for the required switching current, verify thermal performance at continuous full-power operation, and add protection against speaker faults and excessive DC.
おすすめ
Professional Monitor Speaker
A professional monitor amplifier benefits from the TAS5631BDKD's combination of 300 W stereo capability, integrated closed-loop feedback, and distortion below 0.03%. The feedback system helps preserve a controlled output when loudspeaker impedance varies with frequency, which is important for consistent monitoring performance. Place the power stage close to the output inductors and LC filter, and use a clean, low-noise supply. The PWM source must provide adequate signal swing, while the amplifier's thermal design must account for sustained program material rather than only short peak-power measurements.
おすすめ
Subwoofer Power Amplifier
The TAS5631BDKD can support a high-power subwoofer stage in bridge-connected mono operation, with the manufacturer specifying up to 400 W from a 50 V supply. Its integrated feedback is valuable in a subwoofer because low-frequency load impedance can vary considerably. The amplifier should be followed by an inductor and LC output filter matched to the selected subwoofer impedance and crossover plan. Designers must also verify amplifier stability, filter component heating, DC offset behavior, and speaker excursion limits, because high electrical power does not automatically translate into safe mechanical output for the driver.
おすすめ
Home Theater Multi-Channel Amplifier
The TAS5631BDKD can serve as a high-power amplification stage in a home-theater or multichannel audio system that uses PWM signals from a digital audio processor. Its 300 W stereo capability offers substantial headroom for demanding loudspeakers, while the 400 W mono rating supports bridge-driven subwoofer channels. A practical design should partition amplification across appropriately rated channels, preserve clean ground and power returns, and provide separate filtering for each speaker load. Use the DKD thermal pad as part of the heat-transfer path and confirm that the enclosure supports sustained operation at the calculated junction temperature.
おすすめ
Live Sound Reinforcement Amplifier
The TAS5631BDKD is appropriate for a live-sound power amplifier requiring high continuous output, integrated feedback, and a wide audio signal bandwidth. Texas Instruments specifies signal bandwidth up to 80 kHz and distortion below 0.03% for the PurePath HD architecture, supporting high-fidelity reproduction of demanding program material. The output-network design must tolerate the amplifier's switching current without adding audible coloration. In addition to correct filtering, use robust speaker protection, controlled power-supply sequencing, and thermal margins that reflect concert use rather than a short-duration laboratory load.
おすすめ
Multimedia Audio Amplifier
The TAS5631BDKD can serve as the power stage in a multimedia or installation amplifier when the source system provides a PWM audio waveform. Its high-power capability supports low-impedance speakers, while integrated feedback helps maintain output control across their operating range. The implementation should include a low-impedance 50 V supply, short high-current paths, properly rated output inductors, and an LC filter matched to the speaker network. Component tolerances and thermal behavior should be checked over the full enclosure temperature range, especially in compact systems where heat dissipation is more restricted than the IC package alone would suggest.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TAS5631BDKD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TAS5630BDKD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 44-HSSOP (DKD) | 44-HSSOP (DKD) |
| Amplifier Type | PWM-input Class-D audio power amplifier | Class-D audio power amplifier |
主な差別化要因
- Higher documented output capability (vs TAS5630BDKD)
- Integrated closed-loop speaker feedback (vs TAS5630BDKD)
- Two-level thermal protection (vs TAS5630BDKD)
設計ノート
Use the Texas Instruments TAS5631B recommended PCB layout as the electrical and mechanical foundation. Keep the high-current supply, bridge-output, ground, and feedback routes short and wide, with low-impedance decoupling placed directly at the relevant pins. Route the feedback connection as specified so the closed-loop system is not disturbed by high-current switching paths. A 44-pin HSSOP power package requires careful thermal-pad connection and controlled copper-plane temperature rise.
Evaluate thermal performance at the maximum ambient temperature, maximum supply voltage, and intended continuous load. The DKD package warns above a 125°C typical junction temperature and shuts down above 155°C typical, but those thresholds are not substitutes for a thermal design. Use the exposed pad and copper pours as a heat spreader, minimize thermal impedance through the board, and avoid relying on the warning signal as normal operating control. Verify output inductors, capacitors, and nearby components for self-heating.
Design the 25 V to 52.5 V supply path for the high switching current demanded by a 300 W stereo or 400 W mono output. Place bulk and local decoupling where they can supply transient current without long loop inductance, and provide a low-impedance ground return for the power stage. Select output inductors and LC-filter components for the target 4-ohm to 8-ohm load, switching current, allowable loss, and saturation margin. Confirm that the upstream PWM source has adequate amplitude and timing margins.
Do not treat a matching package name as proof that an amplifier is a drop-in replacement. A valid substitution must preserve the DKD footprint, pin functions, supply range, PWM interface, feedback implementation, output topology, and thermal limits. Also check the required output-filter component values and control-signal polarity. Use the pin-description table in the manufacturer datasheet when assigning tracks, particularly for exposed-pad, supply, feedback, and power-stage connections.
コンプライアンス情報
Compliance status was not established from the available manufacturer and distributor records. Review the current TI product page and applicable declarations before release to production.