THS4281DGK - 90MHz High-Speed Rail-to-Rail Op Amp | TI
Teilenummer: THS4281DGK ✓ AktivTHS4281DGK Übersicht
A high-speed operational amplifier is a voltage-feedback amplifier designed to amplify signals while maintaining high small-signal bandwidth and fast large-signal response. In the broader semiconductor hierarchy, the THS4281 belongs to the operational-amplifier family, which forms part of analog and mixed-signal integrated circuits. Rail-to-rail inputs and outputs make the amplifier useful when signal levels approach the supply rails, while voltage-feedback architecture supports straightforward gain-setting networks.
The principal features of the THS4281 include 90 MHz unity-gain bandwidth, 35 V/µs slew rate, 750 µA typical supply current, and operation across a 2.7 V to 15 V single-supply range. These characteristics combine substantial signal-path speed with unusually low supply consumption. The rail-to-rail input stage accommodates a broad input range, and the rail-to-rail output stage improves output swing utilization, making the device appropriate for compact, low-power instrumentation.
The THS4281 is fabricated using Texas Instruments' BiCom-II process and uses a conventional voltage-feedback topology. This combination favors direct-coupled signal paths that require predictable gain, bandwidth, and slew performance rather than the very low input-voltage-noise characteristics associated with dedicated transimpedance amplifiers. Designers should still account for gain-bandwidth behavior, output-current capability, input common-mode limits, and stability when driving capacitive loads.
Typical applications include portable test equipment, battery-powered data-acquisition systems, industrial sensor interfaces, communications equipment, and low-power signal-conditioning modules. Its low 750 µA supply current can support low-energy designs, while the 90 MHz bandwidth and 35 V/µs slew rate provide useful margin for moderate-frequency waveforms and communication interfaces.
A key design consideration is supply and signal-chain headroom. Because the inputs and outputs are rail-to-rail, the achievable output amplitude still depends on load current, output swing limits, and the selected power rails. Decoupling capacitors should be placed close to the supply pins, and feedback components should be selected to preserve the intended gain and stability.
This page combines manufacturer specifications, application guidance, package information, comparison parameters, and verified cross-reference information. It also identifies unresolved package-level and lifecycle details explicitly so engineers can distinguish confirmed characteristics from parameters that must be checked before release to production.
Drop-in-Alternativen für THS4281DGK – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
THS4221DGK
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
THS4521IDGKR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
THS4281DGK Grenzwerte & elektrische Eigenschaften
| Keine Spezifikationen verfügbar |
THS4281DGK standard Pinbelegungsleitfaden
Pinbelegung für THS4281DGK (standard-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für THS4281DGK.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
THS4281DGK ist geeignet für 6 Anwendungs: Portable Data Acquisition, Industrial Sensor Signal Conditioning, Communications Signal Conditioning, Battery-Powered Sensing Node, Precision Test and Measurement, Low-Power Analog Filter.
Portable Data Acquisition
The THS4281DGK fits portable data-acquisition front ends that need a 90 MHz unity-gain bandwidth without the power consumption of a conventional high-speed amplifier. Its 750 µA supply current and 2.7 V minimum single-supply operation support compact, energy-conscious instruments. The rail-to-rail input and output stages preserve useful signal range near the supply limits. When used ahead of an ADC, the amplifier should be configured for the required closed-loop gain while checking noise, settling time, and ADC kickback effects before finalizing the sampling chain.
Empfohlen
Industrial Sensor Signal Conditioning
The THS4281DGK is appropriate for conditioning industrial sensor signals when the control system requires fast response from a low-power analog path. Its rail-to-rail input stage supports signals near the supply range, while the 35 V/µs slew rate helps preserve waveform shape in active filtering or edge-sensitive measurements. The 90 MHz bandwidth provides more closed-loop gain-bandwidth than a general-purpose low-speed device. Engineers should verify sensor output impedance, common-mode behavior, noise requirements, and isolation from high-capacitance sensor cables before committing the amplifier to the module.
Empfohlen
Communications Signal Conditioning
The THS4281DGK can support low-power communications signal-conditioning stages where bandwidth and edge rate matter. The 90 MHz unity-gain bandwidth and 35 V/µs slew rate allow the amplifier to handle moderate-frequency analog signals while remaining compact. Its 750 µA supply current is particularly attractive in battery-operated radio or sensor nodes. The actual design must account for the communications standard's amplitude, distortion, noise, and recovery-time requirements, as well as the high-frequency layout needed to prevent parasitic feedback around a device operating with such a wide bandwidth.
Empfohlen
Battery-Powered Sensing Node
The THS4281DGK suits a battery-powered sensing node that must amplify a sensor output while keeping supply consumption low. Operation begins at 2.7 V, and the 750 µA supply current helps preserve energy in portable systems. Rail-to-rail input and output operation can increase usable signal span in compact systems with limited supply headroom. The designer should calculate the amplifier's contribution to total system power, evaluate source-referred and amplifier-referred noise, and confirm that the sensor bandwidth does not require a wider-band or lower-noise device.
Empfohlen
Precision Test and Measurement
The THS4281DGK can be used in low-level test and measurement signal paths that benefit from high bandwidth but do not require the power of a laboratory amplifier. The 90 MHz unity-gain bandwidth supports wide closed-loop bandwidth, and the 35 V/µs slew rate reduces large-signal distortion when driving moderate loads. Its 750 µA current also suits multi-channel or portable instruments. Final selection should consider input-referred noise, offset voltage, output-current capability, gain accuracy, and the settling behavior required by the measurement bandwidth.
Empfohlen
Low-Power Analog Filter
The THS4281DGK is suitable as the active element in a low-power analog filter where the target closed-loop bandwidth requires high open-loop bandwidth and adequate phase margin. Its 90 MHz unity-gain bandwidth can support active stages above the bandwidth of ordinary micropower amplifiers, while the 35 V/µs slew rate helps preserve large-signal behavior. Component tolerances, noise gain, and amplifier stability must be evaluated at every gain setting. Capacitive loading should also be modeled because fast high-bandwidth amplifiers can require isolation resistors or an output drive network.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für THS4281DGK – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | THS4221DGK | THS4521IDGKR |
|---|---|---|---|
| Package | 8-pin VSSOP (DGK) | 8-pin VSSOP (DGK) | 8-pin VSSOP (DGK) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Type | Voltage-feedback operational amplifier | Rail-to-rail input/output voltage-feedback operational amplifier | Rail-to-rail operational amplifier |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail |
Wichtigste Unterscheidungsmerkmale
- Combines high speed with very low supply current (vs. THS4221DGK)
- Supports single and dual supply operation (vs. THS4521IDGKR)
- Uses a low-power BiCom-II implementation (vs. THS4221DGK)
Designhinweise
Place the supply bypass capacitor directly between each supply pin and ground, with the shortest possible return path. For a single-supply design, connect the negative supply terminal to the system ground; for dual-supply operation, provide clean, symmetrical positive and negative rails. Keep the feedback resistors close to the amplifier pins and avoid routing high-speed output traces beneath or parallel to input traces.
The 90 MHz unity-gain bandwidth requires a controlled board environment even though the application may use a much lower closed-loop bandwidth. Use a solid ground plane, minimize input-node capacitance, and keep the feedback loop compact. When driving an ADC, DAC, cable, or other capacitive load, evaluate stability with the complete output network; an isolation resistor may be needed if the load creates excessive phase shift.
Estimated supply dissipation for the amplifier itself is P = VS × IS. Using 5 V and 750 µA gives approximately 3.75 mW, before considering output-current load and regulator efficiency. This estimate does not include power dissipated in the feedback network or load. Confirm that the source rail can support the specified 750 µA quiescent current plus transient output demand without introducing supply noise into the signal path.
Do not interpret the rail-to-rail designation as unlimited output swing. Output amplitude remains constrained by load current, supply voltage, temperature, and the amplifier's output-swing characteristics. Likewise, 90 MHz unity-gain bandwidth does not guarantee 90 MHz usable bandwidth at every closed-loop gain. Check gain-bandwidth behavior, output drive, input bias current, noise, and settling time for the intended operating point.
Compliance-Informationen
RoHS compliance is identified in the Mouser catalog result. The package is marked with a green-compliant ordering option in related family listings, but separate REACH, halogen-free, and conflict-minerals statements are not established here.