Texas Instruments

THS4281DGK - 90MHz High-Speed Rail-to-Rail Op Amp | TI

N.º da peça: THS4281DGK ✓ Ativo
MOQ: 1 |

THS4281DGK Visão geral

Texas Instruments THS4281DGK is a very-low-power, high-speed, rail-to-rail input and output voltage-feedback operational amplifier with a 90 MHz unity-gain bandwidth, 35 V/µs slew rate, and 750 µA supply consumption. The device operates from 2.7 V to 15 V on a single supply or from ±1.35 V to ±7.5 V on a dual supply, and is packaged in an 8-pin VSSOP.

A high-speed operational amplifier is a voltage-feedback amplifier designed to amplify signals while maintaining high small-signal bandwidth and fast large-signal response. In the broader semiconductor hierarchy, the THS4281 belongs to the operational-amplifier family, which forms part of analog and mixed-signal integrated circuits. Rail-to-rail inputs and outputs make the amplifier useful when signal levels approach the supply rails, while voltage-feedback architecture supports straightforward gain-setting networks.

The principal features of the THS4281 include 90 MHz unity-gain bandwidth, 35 V/µs slew rate, 750 µA typical supply current, and operation across a 2.7 V to 15 V single-supply range. These characteristics combine substantial signal-path speed with unusually low supply consumption. The rail-to-rail input stage accommodates a broad input range, and the rail-to-rail output stage improves output swing utilization, making the device appropriate for compact, low-power instrumentation.

The THS4281 is fabricated using Texas Instruments' BiCom-II process and uses a conventional voltage-feedback topology. This combination favors direct-coupled signal paths that require predictable gain, bandwidth, and slew performance rather than the very low input-voltage-noise characteristics associated with dedicated transimpedance amplifiers. Designers should still account for gain-bandwidth behavior, output-current capability, input common-mode limits, and stability when driving capacitive loads.

Typical applications include portable test equipment, battery-powered data-acquisition systems, industrial sensor interfaces, communications equipment, and low-power signal-conditioning modules. Its low 750 µA supply current can support low-energy designs, while the 90 MHz bandwidth and 35 V/µs slew rate provide useful margin for moderate-frequency waveforms and communication interfaces.

A key design consideration is supply and signal-chain headroom. Because the inputs and outputs are rail-to-rail, the achievable output amplitude still depends on load current, output swing limits, and the selected power rails. Decoupling capacitors should be placed close to the supply pins, and feedback components should be selected to preserve the intended gain and stability.

This page combines manufacturer specifications, application guidance, package information, comparison parameters, and verified cross-reference information. It also identifies unresolved package-level and lifecycle details explicitly so engineers can distinguish confirmed characteristics from parameters that must be checked before release to production.

Alternativas drop-in para THS4281DGK — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

THS4221DGK

✅ Drop-In
📦 8-pin VSSOP (DGK)
Same 8-pin VSSOP DGK format and rail-to-rail voltage-feedback architecture; bandwidth, slew rate, and supply-current differences require circuit-level verification.

📋 Alternativa de referência (fora do catálogo)

THS4521IDGKR

✅ Drop-In
📦 8-pin VSSOP (DGK)
Same 8-pin VSSOP DGK package and rail-to-rail amplifier class; the I-grade suffix and different speed, noise, and power characteristics require validation.

📋 Alternativa de referência (fora do catálogo)

THS4281DGK Classificações máximas e características elétricas

Nenhuma especificação disponível

Guia de Configuração de Pinos do THS4281DGK standard

Configuração de pinos para THS4281DGK (pacote standard). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote standard para THS4281DGK

Nenhum dado detalhado de pinagem disponível para THS4281DGK.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

THS4281DGK é adequado para 6 aplicaçãos: Portable Data Acquisition, Industrial Sensor Signal Conditioning, Communications Signal Conditioning, Battery-Powered Sensing Node, Precision Test and Measurement, Low-Power Analog Filter.

📱

Portable Data Acquisition

The THS4281DGK fits portable data-acquisition front ends that need a 90 MHz unity-gain bandwidth without the power consumption of a conventional high-speed amplifier. Its 750 µA supply current and 2.7 V minimum single-supply operation support compact, energy-conscious instruments. The rail-to-rail input and output stages preserve useful signal range near the supply limits. When used ahead of an ADC, the amplifier should be configured for the required closed-loop gain while checking noise, settling time, and ADC kickback effects before finalizing the sampling chain.

🏭

Industrial Sensor Signal Conditioning

The THS4281DGK is appropriate for conditioning industrial sensor signals when the control system requires fast response from a low-power analog path. Its rail-to-rail input stage supports signals near the supply range, while the 35 V/µs slew rate helps preserve waveform shape in active filtering or edge-sensitive measurements. The 90 MHz bandwidth provides more closed-loop gain-bandwidth than a general-purpose low-speed device. Engineers should verify sensor output impedance, common-mode behavior, noise requirements, and isolation from high-capacitance sensor cables before committing the amplifier to the module.

🌐

Communications Signal Conditioning

The THS4281DGK can support low-power communications signal-conditioning stages where bandwidth and edge rate matter. The 90 MHz unity-gain bandwidth and 35 V/µs slew rate allow the amplifier to handle moderate-frequency analog signals while remaining compact. Its 750 µA supply current is particularly attractive in battery-operated radio or sensor nodes. The actual design must account for the communications standard's amplitude, distortion, noise, and recovery-time requirements, as well as the high-frequency layout needed to prevent parasitic feedback around a device operating with such a wide bandwidth.

🔋

Battery-Powered Sensing Node

The THS4281DGK suits a battery-powered sensing node that must amplify a sensor output while keeping supply consumption low. Operation begins at 2.7 V, and the 750 µA supply current helps preserve energy in portable systems. Rail-to-rail input and output operation can increase usable signal span in compact systems with limited supply headroom. The designer should calculate the amplifier's contribution to total system power, evaluate source-referred and amplifier-referred noise, and confirm that the sensor bandwidth does not require a wider-band or lower-noise device.

🖥️

Precision Test and Measurement

The THS4281DGK can be used in low-level test and measurement signal paths that benefit from high bandwidth but do not require the power of a laboratory amplifier. The 90 MHz unity-gain bandwidth supports wide closed-loop bandwidth, and the 35 V/µs slew rate reduces large-signal distortion when driving moderate loads. Its 750 µA current also suits multi-channel or portable instruments. Final selection should consider input-referred noise, offset voltage, output-current capability, gain accuracy, and the settling behavior required by the measurement bandwidth.

🔧

Low-Power Analog Filter

The THS4281DGK is suitable as the active element in a low-power analog filter where the target closed-loop bandwidth requires high open-loop bandwidth and adequate phase margin. Its 90 MHz unity-gain bandwidth can support active stages above the bandwidth of ordinary micropower amplifiers, while the 35 V/µs slew rate helps preserve large-signal behavior. Component tolerances, noise gain, and amplifier stability must be evaluated at every gain setting. Capacitive loading should also be modeled because fast high-bandwidth amplifiers can require isolation resistors or an output drive network.

Resumo dos produtos recomendados

THS4281DG4 Related THS4281 amplifier ordering option Usado em: Portable Data Acquisition, Battery-Powered Sensing Node, Low-Power Analog Filter THS4221DGK Candidate 8-pin VSSOP signal-conditioning amplifier Usado em: Portable Data Acquisition, Communications Signal Conditioning, Precision Test and Measurement THS4521IDGKR Related rail-to-rail VSSOP amplifier Usado em: Industrial Sensor Signal Conditioning, Battery-Powered Sensing Node, Low-Power Analog Filter THS4281DGKG4 Related green-compliant THS4281 ordering option Usado em: Industrial Sensor Signal Conditioning THS4281DGK Texas Instruments Usado em: Communications Signal Conditioning THS4281DGKRG4 Related THS4281 green-compliant ordering option Usado em: Precision Test and Measurement
What are the key specifications of THS4281DGK that engineers should know?
The THS4281DGK combines a 90 MHz unity-gain bandwidth, 35 V/µs slew rate, and 750 µA supply current in an 8-pin VSSOP package. According to the Texas Instruments THS4281 datasheet, it uses a voltage-feedback architecture with rail-to-rail input and output stages, operates from 2.7 V to 15 V on a single supply, and supports ±1.35 V to ±7.5 V from a dual supply.
What is the operating voltage range of THS4281DGK?
The THS4281DGK operates from 2.7 V to 15 V with a single supply and from ±1.35 V to ±7.5 V with a dual supply. According to the Texas Instruments THS4281 datasheet, the device was fabricated using the BiCom-II process for operation over these wide supply ranges. This makes it suitable for low-voltage portable systems as well as higher-voltage single-supply instrumentation.
What is the unity-gain bandwidth and slew rate of THS4281DGK?
The THS4281DGK has a 90 MHz unity-gain bandwidth and a 35 V/µs slew rate. According to the Texas Instruments THS4281 datasheet, these specifications provide high small-signal bandwidth and rapid large-signal response. The combination is useful in compact signal-conditioning paths that require more bandwidth than conventional low-power operational amplifiers while retaining a supply current of only 750 µA.
Why is the THS4281DGK suitable for portable and battery-powered equipment?
The THS4281DGK is suitable for portable equipment because it consumes only 750 µA and supports operation from 2.7 V to 15 V. According to the Texas Instruments THS4281 datasheet, the device also provides a 90 MHz unity-gain bandwidth and 35 V/µs slew rate. It therefore offers a useful speed-to-power balance for low-power data acquisition, sensing, and communications signal paths.
Where can I download the THS4281DGK datasheet PDF?
The official THS4281 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ths4281.pdf. The document contains the electrical characteristics, application information, pin configuration, and ordering details for the THS4281 family. Use the DGK orderable-information section to confirm the 8-pin VSSOP configuration associated with THS4281DGK.
Where can I find the THS4281DGK pinout?
The THS4281DGK pin configuration is shown in the Texas Instruments THS4281 datasheet and the manufacturer product page for the 8-pin VSSOP DGK package. The package has eight physical pins, but individual terminal names and no-connect assignments should be taken directly from the pin-description table before PCB routing. This prevents confusion between signal pins, supply pins, and electrically unused locations.
THS4281DGK vs THS4221DGK — which is better for low-power signal conditioning?
Choose THS4221DGK when its specific bandwidth and supply-current characteristics better match the design, and choose THS4281DGK when the 90 MHz bandwidth, 35 V/µs slew rate, and 750 µA supply current are required. According to the Texas Instruments THS4281 datasheet, the THS4281 is expressly optimized for very-low-power, high-speed rail-to-rail operation. Confirm both devices' pin configuration and stability requirements before substitution.
Is THS4281DGK the same as THS4221DGK?
No. The THS4281DGK and THS4221DGK are related single-amplifier VSSOP devices but are not identical products. The confirmed THS4281 characteristics include 90 MHz unity-gain bandwidth, 35 V/µs slew rate, 750 µA supply current, and rail-to-rail inputs and outputs. Treat the THS4221DGK as a candidate replacement only after checking its complete electrical specifications, pin functions, stability, and intended operating range.
When should I choose THS4281DGK over a lower-speed operational amplifier?
Choose THS4281DGK when the signal path needs high bandwidth or fast large-signal response but the design also has a strict power budget. According to the Texas Instruments THS4281 datasheet, the amplifier provides 90 MHz unity-gain bandwidth, 35 V/µs slew rate, and 750 µA supply current. A lower-speed amplifier may be preferable when slew rate and bandwidth are immaterial, but it will not provide the same signal-path speed.
Is THS4281DGK suitable for rail-to-rail sensor interfaces?
Yes, the THS4281DGK is suitable for rail-to-rail sensor interfaces that benefit from its high speed and low supply current. According to the Texas Instruments THS4281 datasheet, both the input and output stages are rail-to-rail. The designer should still verify the input common-mode range, output swing under the actual load, noise requirements, and stability before using it with high-impedance or capacitive sources.
What is the best drop-in replacement for THS4281DGK?
THS4221DGK is a candidate drop-in replacement for THS4281DGK because both are listed as single-circuit, rail-to-rail, 8-pin VSSOP voltage-feedback amplifiers. However, a valid replacement requires checking pin functions, bandwidth, slew rate, supply current, output swing, and stability against the circuit requirements. The Texas Instruments THS4281 datasheet should be used as the baseline for every comparison.
What can replace THS4281DGK in an 8-pin VSSOP design?
THS4221DGK and THS4521IDGKR are candidate replacements to evaluate because they are related 8-pin VSSOP operational-amplifier families. No replacement should be treated as guaranteed drop-in without checking its pin description, electrical characteristics, supply range, and stability. The Texas Instruments THS4281 datasheet provides the comparison baseline, particularly its 90 MHz bandwidth, 35 V/µs slew rate, and 750 µA supply current.
Where to buy THS4281DGK online?
Use the Request a Quote form on this page to request THS4281DGK availability, quantity, and lead time for your project. The request should include the exact THS4281DGK orderable part number and the required package quantity. Texas Instruments identifies the device as a very-low-power, high-speed, rail-to-rail input and output voltage-feedback operational amplifier in the 8-pin VSSOP DGK package.
What is the price of THS4281DGK?
Submit THS4281DGK to the Request a Quote form on this page for current commercial terms. The form is the appropriate channel for quotation, quantity pricing, and availability because commercial pricing changes with order quantity and market conditions. Engineers should quote the exact DGK suffix and specify whether the required quantity is for prototype, production, or scheduled replenishment.
What is the lead time and stock status for THS4281DGK?
Request the current THS4281DGK stock position and lead time through the Request a Quote form on this page. Include your required order quantity, target delivery date, and acceptable packaging configuration so the commercial response reflects the actual project need. The manufacturer lists THS4281 as an active product, while current lot-level stock and lead time are commercial conditions rather than fixed electrical specifications.

Dados de referência de engenharia para THS4281DGK — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose THS4281DGK when a compact analog signal path needs both high bandwidth and low supply consumption. Its confirmed 90 MHz unity-gain bandwidth, 35 V/µs slew rate, 750 µA supply current, and rail-to-rail inputs and outputs make it attractive for portable measurement, data acquisition, sensor interfaces, and communications conditioning. Choose THS4221DGK when its complete electrical specifications more closely satisfy the required gain, noise, stability, and power targets in the same 8-pin VSSOP footprint. Consider THS4521IDGKR when its rail-to-rail architecture and extended temperature designation are needed, provided its bandwidth, noise, slew rate, and supply-current data are verified against the circuit. Do not select a replacement solely by package name: verify every pin function, input range, output swing, load capability, and stability requirement against the Texas Instruments THS4281 datasheet.

Comparação com alternativas

Parâmetro Este produto THS4221DGK THS4521IDGKR
Package 8-pin VSSOP (DGK) 8-pin VSSOP (DGK) 8-pin VSSOP (DGK)
Brand Texas Instruments Texas Instruments Texas Instruments
Amplifier Type Voltage-feedback operational amplifier Rail-to-rail input/output voltage-feedback operational amplifier Rail-to-rail operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail

Principais diferenciais

  • Combines high speed with very low supply current (vs THS4221DGK)
  • Supports single and dual supply operation (vs THS4521IDGKR)
  • Uses a low-power BiCom-II implementation (vs THS4221DGK)

Notas de projeto

Place the supply bypass capacitor directly between each supply pin and ground, with the shortest possible return path. For a single-supply design, connect the negative supply terminal to the system ground; for dual-supply operation, provide clean, symmetrical positive and negative rails. Keep the feedback resistors close to the amplifier pins and avoid routing high-speed output traces beneath or parallel to input traces.

The 90 MHz unity-gain bandwidth requires a controlled board environment even though the application may use a much lower closed-loop bandwidth. Use a solid ground plane, minimize input-node capacitance, and keep the feedback loop compact. When driving an ADC, DAC, cable, or other capacitive load, evaluate stability with the complete output network; an isolation resistor may be needed if the load creates excessive phase shift.

Estimated supply dissipation for the amplifier itself is P = VS × IS. Using 5 V and 750 µA gives approximately 3.75 mW, before considering output-current load and regulator efficiency. This estimate does not include power dissipated in the feedback network or load. Confirm that the source rail can support the specified 750 µA quiescent current plus transient output demand without introducing supply noise into the signal path.

Do not interpret the rail-to-rail designation as unlimited output swing. Output amplitude remains constrained by load current, supply voltage, temperature, and the amplifier's output-swing characteristics. Likewise, 90 MHz unity-gain bandwidth does not guarantee 90 MHz usable bandwidth at every closed-loop gain. Check gain-bandwidth behavior, output drive, input bias current, noise, and settling time for the intended operating point.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS compliance is identified in the Mouser catalog result. The package is marked with a green-compliant ordering option in related family listings, but separate REACH, halogen-free, and conflict-minerals statements are not established here.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

THS4281DGK datasheet THS4281DGK specifications THS4281DGK pinout THS4281DGK datasheet pdf THS4281DGK equivalent THS4281DGK replacement THS4281DGK vs THS4221DGK THS4281DGK footprint THS4281 90 MHz amplifier Texas Instruments THS4281DGK THS4281DGK price THS4281DGK stock

Componentes & termos relacionados

Texas Instruments THS4281DGK THS4281 THS4221DGK THS4521IDGKR operational amplifier voltage-feedback amplifier high-speed amplifier analog integrated circuit semiconductor rail-to-rail input rail-to-rail output unity-gain bandwidth slew rate supply current BiCom-II process VSSOP-8 surface-mount package low-dropout regulator RoHS data acquisition sensor signal conditioning communications equipment portable instrumentation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ