NXP Semiconductors

TJA1051T/3/CM - 5Mbps CAN Transceiver | NXP | SOIC-8

Teilenummer: TJA1051T/3/CM ✓ Aktiv
4.5 V to 5.5 V Vdss 8-pin SOIC Package Enhanced compared with earlier TJA generations Memory
MOQ: 1 |

TJA1051T/3/CM Übersicht

NXP Semiconductors TJA1051T/3/CM is a high-speed CAN transceiver with a maximum data rate of 5 Mbit/s, a 4.5 V to 5.5 V supply range, and an 8-pin SOIC package. It provides the physical-layer interface between a CAN protocol controller and a two-wire CAN bus, combining a CAN transmitter, CAN receiver, and bus-driver circuitry in one device. The selected /3 variant supports direct interfacing with microcontrollers operating from 3 V to 5 V.

A CAN transceiver is an interface IC that converts digital controller signals into differential CAN bus levels and converts received bus levels into logic signals for the host controller. It belongs to the CAN physical-layer transceiver class within interface ICs, with the broader hierarchy being CAN transceiver, bus interface, interface IC, and semiconductor. The two-wire CAN bus supports robust communication among automotive controllers, industrial equipment, and embedded systems.

The TJA1051 family provides enhanced electromagnetic compatibility and electrostatic-discharge performance compared with earlier CAN transceiver generations. TJA1051T/3/CM supports Normal and Silent operating modes and includes passive behavior when unpowered. These characteristics help designers maintain defined bus behavior during reset, shutdown, fault-recovery, and startup conditions. The device is associated with 5 Mbit/s CAN operation, making it appropriate for systems whose controller supports classic CAN at that rate.

The TJA1051T/3 is backward compatible with the TJA1050 and allows direct connection to 3 V microcontrollers. The NXP product page lists a reel-and-reel packing configuration with a minimum package quantity of 2500 units, a minimum order quantity of 2500 units, and a stated lead time of 10 weeks. The Arrow listing identifies this device as an automotive AEC-Q100, normal/silent-mode, 5 V, 8-pin SOIC CAN transceiver.

Typical uses include vehicle body-control modules, automotive gateway controllers, industrial automation equipment, robotics controllers, and embedded CAN nodes. In an automotive ECU, the transceiver sits between a CAN controller and the CANH and CANL bus conductors, providing the differential drive and receive functions required by the physical bus. In industrial systems, its EMC characteristics and unpowered passive behavior help reduce installation and fault-recovery risks.

PCB design should preserve the short, symmetrical high-speed CAN traces associated with CANH and CANL, provide a solid ground reference, and place termination only at the two physical ends of the bus. Supply decoupling should be placed close to the device, while bus protection components should be selected to handle the voltage transients expected in the installation environment. The manufacturer pin-description and application information should govern the final land pattern and component arrangement.

This product page consolidates the manufacturer ordering information, technical attributes, practical application guidance, and verified drop-in considerations for TJA1051T/3/CM. It is intended to support component selection, footprint review, sourcing, and early hardware design rather than replace the complete NXP datasheet.

Drop-in-Alternativen für TJA1051T/3/CM – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit TJA1051T/3/CM (gleiche Bauform und Footprint) – abweichend in Package, Automotive Qualification, Electromagnetic Compatibility, Electrostatic Discharge Performance, Product Type.

Texas Instruments
Package: SOIC-8 (D)
Automotive Qualification: AEC-Q100
NXP Semiconductors
Electromagnetic Compatibility: Improved EMC performance
Electrostatic Discharge Performance: Improved ESD performance
Product Type: High-speed CAN bus transceiver

TJA1051T/3,118

✅ Drop-In
📦 SOIC-8
Same TJA1051T/3 5 Mbit/s CAN configuration and SOIC-8 footprint; ordering suffix differs, with no identified change to the 5 Mbit/s, 4.5 V to 5.5 V, and 3 V to 5 V controller-interface ratings

📋 Referenzalternative (nicht im Katalog)

TJA1051T/3/1J

✅ Drop-In
NXP Semiconductors
📦 SOIC-8
High-speed CAN bus transceiver · Controller Area Network · 5 Mbit/s · 5.5 V maximum · 3 V to 5 V · Two-wire differential CAN bus · 1/1 half transceiver · 3 V to 5 V compatible

Preis auf Anfrage

Datenblatt ansehen →

TCAN1051HVDQ1

✅ Drop-In
Texas Instruments
📦 SOIC-8
High-speed CAN FD transceiver · 2 Mbps · ±58 V on CANH and CANL · 4.5 V to 5.5 V · 45 mA (typical) · -12 V to +12 V · ISO 11898-2:2016 · Normal, Silent (listen-only)

✓ Auf Lager

$1 / Stück

Datenblatt ansehen →

TJA1042T/3,112

✅ Drop-In
📦 SOIC-8
Same 8-pin SOIC footprint and 5 V high-speed CAN transceiver class; compared with the TJA1051T/3/CM's 5 Mbit/s rating and passive unpowered behavior, the TJA1042T/3,112 mode and reference-pin behavior must be verified for exact equivalence

📋 Referenzalternative (nicht im Katalog)

TJA1051T/3/CM Technische Daten

Product Type High-speed CAN transceiver
Maximum CAN Data Rate 5 Mbit/s
Supply Voltage Range 4.5 V to 5.5 V
Microcontroller Interface Compatibility 3 V to 5 V
CAN Bus Configuration Two-wire CAN bus
Operating Modes Normal and Silent
Unpowered Behavior Passive
Gehäuse 8-pin SOIC
Montageart Surface mount
Packing Format Reel, 13 inch
Minimum Package Quantity 2500 units
Minimum Order Quantity 2500 units
Manufacturer Lead Time 10 weeks
Automotive Qualification AEC-Q100 Grade 1
Electromagnetic Compatibility Enhanced compared with earlier TJA generations
Electrostatic Discharge Performance Enhanced compared with earlier TJA generations
Backward Compatibility Compatible with TJA1050

TJA1051T/3/CM 2500 units Pinbelegungsleitfaden

Pinbelegung für TJA1051T/3/CM (2500 units-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für TJA1051T/3/CM im 2500 units-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TJA1051T/3/CM.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TJA1051T/3/CM ist geeignet für 6 Anwendungs: Automotive Body Control Module, Vehicle Gateway Controller, Industrial Automation Controller, Robotics Control Network, Embedded Sensor Node, Diagnostic Test Equipment.

🚗

Automotive Body Control Module

The TJA1051T/3/CM fits an automotive body-control module that communicates over a two-wire CAN network at rates up to 5 Mbit/s. Its 4.5 V to 5.5 V transceiver supply supports conventional 5 V automotive electronics, while direct 3 V microcontroller compatibility simplifies connections to suitable low-voltage controllers. The passive unpowered behavior helps prevent the transceiver from disturbing the bus during reset or power transitions. Its AEC-Q100 Grade 1 identification makes it appropriate for programs requiring that qualification level.

🚗

Vehicle Gateway Controller

A vehicle gateway controller often connects CAN traffic from separate vehicle domains, making reliable bus interface and reset behavior important. The TJA1051T/3/CM provides a 5 Mbit/s classic CAN physical layer with enhanced EMC and ESD performance relative to earlier TJA generations. Its passive state when unpowered reduces unwanted bus activity during controller startup, while Silent mode supports diagnostics or controlled bus states. The 8-pin SOIC format keeps the interface compact for gateway PCB layouts.

🏭

Industrial Automation Controller

The TJA1051T/3/CM is suitable for an industrial automation controller that connects sensors, actuators, and motor-control subsystems through a CAN network. Its 5 Mbit/s capability supports high-rate controller traffic, while the 3 V to 5 V microcontroller compatibility allows use with suitable low-voltage embedded controllers. Enhanced EMC performance is valuable in factory environments containing motors and switching equipment. Board-level surge protection and verified termination should still be designed around the installation's cable length and fault conditions.

🏭

Robotics Control Network

A robot controller can use the TJA1051T/3/CM to bridge a CAN protocol controller to motor and sensor nodes distributed across the machine. The 5 Mbit/s rate supports timely command and status traffic, and the 8-pin SOIC package leaves more board area for processor, memory, and power circuitry. Passive unpowered behavior is useful during emergency stops or controller resets because it avoids unintended transceiver activity. In mobile robots, the CAN wiring should remain protected from motor transients and mechanically routed away from high-current switching paths.

🧩

Embedded Sensor Node

The TJA1051T/3/CM can connect a compact embedded sensor node to a CAN-based sensing backbone. Its direct 3 V microcontroller compatibility permits use with suitable 3 V controllers, while the transceiver itself operates from 4.5 V to 5.5 V. The low pin-count SOIC-8 package is practical for space-constrained sensor electronics, and Normal and Silent modes provide operational control for measurement and maintenance states. The design must ensure that unpowered passive behavior and termination remain acceptable for the complete network.

🔧

Diagnostic Test Equipment

The TJA1051T/3/CM can provide the CAN physical layer in diagnostic equipment intended to communicate with embedded automotive or industrial controllers. Its 5 Mbit/s capability covers high-speed classic CAN test traffic, and Silent mode can help isolate node behavior during selected diagnostic procedures. The 8-pin SOIC package is compatible with compact multi-channel test hardware. Engineers should use the manufacturer application guidance to verify termination, bus-fault handling, and logic timing before automating repetitive bus tests.

Zusammenfassung der empfohlenen Produkte

TJA1051T/3,118 Same TJA1051T/3 family ordering option for automotive CAN interface designs Verwendet in: Automotive Body Control Module, Industrial Automation Controller, Embedded Sensor Node TJA1042T/3,112 NXP 8-pin SOIC CAN transceiver candidate for comparison Verwendet in: Automotive Body Control Module, Industrial Automation Controller, Embedded Sensor Node TCAN1051 Pin-to-pin CAN transceiver candidate for supply-chain or design review Verwendet in: Vehicle Gateway Controller, Robotics Control Network, Diagnostic Test Equipment TJA1051T/3/1J NXP Semiconductors Verwendet in: Vehicle Gateway Controller, Robotics Control Network, Diagnostic Test Equipment
What is the TJA1051T/3/CM?
The TJA1051T/3/CM is an NXP Semiconductors high-speed CAN transceiver for connecting a CAN controller to a two-wire CAN bus. According to the NXP TJA1051 datasheet, it supports operation up to 5 Mbit/s, operates from a 4.5 V to 5.5 V supply, and uses an 8-pin SOIC package. The device combines transmitter, receiver, and bus-driver functions in one interface IC.
Where can I download the TJA1051T/3/CM datasheet PDF?
The official TJA1051T/3/CM datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1051.pdf. The document describes the TJA1051 family, including the /3 variant, 3 V microcontroller compatibility, Normal and Silent modes, unpowered behavior, electrical characteristics, and application information. Use the NXP document for the authoritative pin descriptions, timing data, and recommended application circuit.
Where can I find the TJA1051T/3/CM pinout?
The TJA1051T/3/CM pinout is documented in the NXP TJA1051 datasheet under the package and pin-description information. The device is an 8-pin SOIC, but a complete numbered pin list is not reproduced here because the required manufacturer pin table was not included in the accessible product material. Use the pin-description table and SOIC-8 land pattern when assigning CANH, CANL, supply, ground, and controller-interface connections.
What are the key specifications of TJA1051T/3/CM that engineers should know?
The TJA1051T/3/CM is a 5 Mbit/s, 5 V CAN transceiver in an 8-pin SOIC package. Key electrical and system attributes include a 4.5 V to 5.5 V supply range, direct interfacing with 3 V to 5 V microcontrollers, Normal and Silent modes, passive behavior when unpowered, and enhanced EMC and ESD performance. NXP also identifies the component as backward compatible with the TJA1050.
Can TJA1051T/3/CM connect to a 3.3V microcontroller?
Yes. The TJA1051T/3/CM can connect directly to microcontrollers with supply voltages down to 3 V. The NXP datasheet specifically identifies the TJA1051T/3 and TJA1051TK/3 variants as suitable for direct interfacing with 3 V controllers. Its own transceiver supply remains 4.5 V to 5.5 V, so the logic-interface and transceiver supply requirements should be checked separately during schematic design.
What is the difference between TJA1051T/3 and TJA1051T/E?
The TJA1051T/3 supports 3 V microcontroller interfacing, while the TJA1051T/E adds a low-current Off mode selected by the EN pin. According to the NXP datasheet, the TJA1051T/E disables the transceiver in Off mode and leaves the bus pins floating, making the device invisible to the rest of the network. The TJA1051T/3 instead emphasizes compatibility with low-voltage controller logic.
What can replace TJA1051T/3/CM?
The closest documented replacement options are the TJA1051T/3,118 and TJA1051T/3/1J in the 8-pin SOIC family. The TCAN1051 is also described by Texas Instruments as a pin-to-pin replacement for the TJA1051, although controller-interface and operating-mode details must be checked before substitution. A replacement should be approved only after verifying pin functions, supply voltage, logic thresholds, bus timing, ESD behavior, and package geometry.
Is TCAN1051 a drop-in replacement for TJA1051T/3/CM?
The TCAN1051 can be used as a pin-to-pin replacement in designs where its electrical and functional characteristics satisfy the original requirements. Texas Instruments identifies it as the intended pin-to-pin replacement for the TJA1051. However, verification remains necessary for supply range, RXD and TXD logic levels, bus timing, standby behavior, and whether the selected TCAN1051 ordering code uses the same SOIC-8 footprint.
TJA1051T/3/CM vs TCAN1051: which is better for an automotive ECU?
Choose the TJA1051T/3/CM when its NXP qualification, 3 V controller compatibility, passive unpowered behavior, and established Normal/Silent operation are specifically required. Choose the TCAN1051 when a manufacturer-documented pin-to-pin replacement offers a preferred supply chain or an automotive qualification suitable for the program. Final selection should compare the two datasheets for EMC, ESD, bus timing, mode-control pins, and AEC-Q100 qualification rather than relying on package equivalence alone.
When should I choose TJA1051T/3/CM over TJA1042T/3,112?
Choose TJA1051T/3/CM when the design requires the TJA1051 family behavior, including passive behavior when unpowered, enhanced EMC and ESD performance, and direct interfacing with 3 V microcontrollers. Consider TJA1042T/3,112 only after comparing its logic-reference arrangement, operating modes, timing, and pin behavior against the existing design. Both are identified in 8-pin SOIC packages, but package size alone does not establish functional interchangeability.
Is TJA1051T/3/CM suitable for industrial CAN systems?
Yes, the TJA1051T/3/CM is suitable for industrial CAN systems requiring high-speed classic CAN communication, low-voltage controller interfacing, and robust EMC behavior. Its passive unpowered state can help define bus behavior during controller reset or power transitions. For industrial installations, add appropriate surge and ESD protection and verify that the selected protection network does not distort high-speed CAN edge rates.
What is the lead time for TJA1051T/3/CM?
NXP lists a lead time of 10 weeks for the TJA1051T product family, with a minimum order quantity of 2500 units and a minimum package quantity of 2500 units. For the exact TJA1051T/3/CM configuration, request the current lead time through the Request a Quote form on this page. Scheduling should allow for manufacturing, incoming inspection, and any required automotive qualification review.
Where can I buy TJA1051T/3/CM online?
Use the Request a Quote form on this page to request the current TJA1051T/3/CM price, stock position, and lead time. The form allows buyers to specify the required reel configuration, quantity, and shipment destination. NXP identifies a reel-and-reel packing format with a minimum package quantity of 2500 units, which should be included in the purchase request.
What is the price of TJA1051T/3/CM?
The current commercial price for TJA1051T/3/CM should be obtained through the Request a Quote form on this page. Pricing can vary with reel configuration, order quantity, currency, and supply availability, so a static figure may not reflect the required shipment. Submit the exact MPN and quantity to receive a current quotation and any applicable volume-break information.
Is TJA1051T/3/CM in stock?
The current TJA1051T/3/CM stock position should be confirmed through the Request a Quote form on this page. NXP identifies a 10-week family lead time, a 2500-unit minimum order quantity, and a 2500-unit minimum package quantity. These figures indicate the ordering basis but should not be treated as confirmation of current inventory for the exact ordering code.

Technische Referenzdaten für TJA1051T/3/CM – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose TJA1051T/3/CM when the design uses a 5 V classic CAN bus at up to 5 Mbit/s and benefits from direct compatibility with 3 V to 5 V microcontrollers. Its passive unpowered state, Normal and Silent modes, and enhanced EMC and ESD performance make it particularly suitable for automotive and industrial controllers. Prefer TJA1051T/3,118 or TJA1051T/3/1J when the same electrical configuration and SOIC-8 footprint are required but the approved ordering suffix differs. Consider TCAN1051 only after confirming its pin functions, supply range, timing, qualification, and unpowered behavior against the original design. TJA1042T/3,112 may be suitable in an 8-pin SOIC design, but its logic-reference and operating-mode behavior must be reviewed carefully. For any substitution, verify controller logic levels, CAN timing, bus protection, package geometry, and automotive qualification before releasing production artwork.

Vergleich mit Alternativen

Parameter Dieses Produkt TJA1051T/3,118 TJA1051T/3/1J TCAN1051 TJA1042T/3,112
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors Texas Instruments NXP Semiconductors
Product Type High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver CAN transceiver High-speed CAN transceiver

Wichtigste Unterscheidungsmerkmale

  • Direct low-voltage controller interface (vs. TJA1042T/3,112)
  • Defined passive behavior when unpowered (vs. TCAN1051)
  • Third-generation EMC and ESD improvement (vs. TJA1050)

Designhinweise

Route CANH and CANL as a closely coupled differential pair with continuous ground reference and minimize stub branches. Place the transceiver close to the bus connector or protection network so transient current is diverted before reaching the IC. Follow the NXP application circuit and the SOIC-8 land pattern for decoupling placement. Do not create unequal copper geometries around the pair, because impedance discontinuities can produce reflections at the supported 5 Mbit/s data rate.

Decouple the 4.5 V to 5.5 V transceiver supply close to the device with the capacitance and placement specified by the NXP datasheet. Keep the CAN bus pins and protection components physically separated from noisy power-conversion paths. The /3 variant can interface with a 3 V controller, but that interface compatibility does not permit operating the transceiver itself below 4.5 V. Verify the controller's TXD and RXD levels against the transceiver thresholds before enabling the bus.

Do not confuse the TJA1051T/3 controller-interface feature with a 3.3 V transceiver supply requirement. The transceiver still requires 4.5 V to 5.5 V, and the host controller must meet the TXD and RXD logic levels. Also avoid adding termination resistors indiscriminately: a nominal 120 ohm termination should appear across CANH and CANL only at the two physical ends of the bus, not at every node.

Use the transceiver's Normal and Silent modes according to the system state machine rather than driving TXD arbitrarily during reset. Silent mode preserves bus reception while preventing normal transmission, whereas passive unpowered behavior addresses a different operating condition. Review controller reset timing and fault-recovery behavior so the host software can prevent unintended arbitration or error frames when the transceiver supply changes.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The Arrow product listing identifies TJA1051T/3/CM as AEC-Q100 Grade 1 automotive qualified. Other environmental and material-compliance declarations are not established here.

Daten verifiziert am: 2026-11-18 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

tja1051t datasheet tja1051t module tja1051t 3 datasheet TJA1051T/3/CM datasheet PDF TJA1051T/3/CM pinout TJA1051T/3/CM SOIC-8 TJA1051T/3/CM equivalent TJA1051T/3/CM replacement TJA1051T/3/CM vs TCAN1051 TJA1051T/3/CM price TJA1051T/3/CM stock NXP TJA1051T/3/CM

Verwandte Bauteile & Begriffe

NXP Semiconductors TJA1051T/3/CM TJA1051T TJA1051T/3 TJA1051T/3,118 TJA1051T/3/1J TCAN1051 TJA1042T/3,112 TJA1050 CAN transceiver Controller Area Network CAN bus CAN physical layer interface IC semiconductor high-speed CAN 5 Mbit/s Normal mode Silent mode passive unpowered behavior SOIC-8 surface-mount package EMC ESD AEC-Q100 Grade 1 3 V microcontroller compatibility
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen