TLE9461ESXUMA1 - OPTIREG Lite SBC, 5V LDO + CAN FD | Infineon
Teilenummer: TLE9461ESXUMA1 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $2.97 | $29,70 |
| 100 | $2.58 | $258,00 |
| 500 | $2.21 | $1.105,00 |
| 1.000 | $1.94 | $1.940,00 |
| 3.000 | $1.71 | $5.130,00 |
TLE9461ESXUMA1 Übersicht
A System Basis Chip (SBC) is a multi-functional power and communication IC that combines on a single die the voltage regulators, communication transceivers, and supervision features that an automotive Electronic Control Unit (ECU) needs to interface with a microcontroller and the vehicle bus. SBCs sit at the intersection of power management ICs and interface ICs in the automotive semiconductor hierarchy, and the OPTIREG family is Infineon's automotive-grade SBC line.
Key features include an integrated CAN FD transceiver supporting data rates up to 5 Mbit/s, a window watchdog with multiple time-out windows, a TEST pin for SBC development mode, and software compatibility with the broader TLE926x and TLE927x SBC families. The device also offers overtemperature and short-circuit protection, a wide input voltage range suitable for 12 V automotive rails, and an exposed thermal pad that enables sustained operation at elevated ambient temperatures.
The TLE9461ES uses a monolithic BiCMOS power process, integrating the LDO pass element, the CAN transceiver line driver/receiver, and the watchdog timer on a single die. The exposed pad on the bottom of the PG-TSDSO-24-1 package provides a low-thermal-resistance path to the PCB copper pour, which is essential for the 250 mA continuous LDO load and the transient CAN bus events.
Typical applications include automotive body controllers, HVAC modules, seat and mirror controllers, lighting ECUs, gateway modules, and CAN node peripherals that need a compact single-chip 5 V supply plus CAN interface. The wide input range also enables 12 V and 24 V truck-bus compatibility.
When designing with the TLE9461ES, ensure the exposed pad is soldered to a copper pour of at least 1 square centimeter to keep junction temperature within AEC-Q100 Grade 1 limits. Use Infineon's recommended 100 nF + 4.7 µF input capacitor network and place the CAN bus termination as close to the CANH/CANL pins as possible to meet IEC 62228-4 EMC requirements.
This page synthesizes distributor stock, real-time pricing, pin-compatible SBC alternatives, and EMC layout guidance beyond the manufacturer datasheet.
Drop-in-Alternativen für TLE9461ESXUMA1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit TLE9461ESXUMA1 (gleiche Bauform und Footprint) – abweichend in CAN Data Rate, Package, Product Type.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
TLE9471ESXUMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
TLE9261QX
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
TLE9278QXV33
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
TLE9461ESXUMA1 Technische Daten
| Product Type | System Basis Chip (Lite SBC) |
| Funktion | 5 V LDO + CAN FD transceiver + Watchdog |
| LDO Output Voltage | 5 V (typical) |
| LDO Output Current | 250 mA |
| CAN Transceiver Standard | ISO 11898-1 (CAN FD) |
| CAN Data Rate | Up to 5 Mbit/s |
| Watchdog | Window watchdog (multiple time-out windows) |
| Eingangsspannungsbereich | 5.5 V to 28 V (load-dump tolerant) |
| Betriebstemperatur | -40C to +125C (AEC-Q100 Grade 1) |
| Gehäuse | PG-TSDSO-24-1 (24-pin, exposed pad, 150 mil) |
| Montageart | Surface Mount |
| MSL-Level | 3 |
| ESD Protection (CAN bus) | 8 kV HBM (per datasheet) |
| Protection Features | Overtemperature, short-circuit, load dump |
| Software Compatibility | TLE926x and TLE927x SBC families |
| TEST Pin | Yes (SBC development mode entry) |
| RoHS-Status | Compliant |
| Automotive Qualification | AEC-Q100 Grade 1 |
TLE9461ESXUMA1 Pin-Konfiguration
| Pin 1 | VBAT — Battery supply input (5.5 V to 28 V) |
| Pin 2 | GND — Ground |
| Pin 3 | VCC — 5 V LDO output to MCU |
| Pin 4 | WK — Wake input |
| Pin 5 | TEST — Test mode entry (development mode) |
| Pin 6 | WD_DIS — Watchdog disable |
| Pin 7 | WDO — Watchdog output to MCU |
| Pin 8 | RSTN — Reset output (active low) |
| Pin 9 | INTN — Interrupt output to MCU |
| Pin 10 | TXDC — CAN transmit data from MCU |
| Pin 11 | RXDC — CAN receive data to MCU |
| Pin 12 | CANH — CAN bus high line |
| Pin 13 | CANL — CAN bus low line |
| Pin 14 | SPLIT — CAN bus common-mode stabilization |
| Pin 15 | STB — Standby control input |
| Pin 16 | EN — Enable input |
| Pin 17 | NC — Not connected (per datasheet) |
| Pin 18 | NC — Not connected (per datasheet) |
| Pin 19 | NC — Not connected (per datasheet) |
| Pin 20 | NC — Not connected (per datasheet) |
| Pin 21 | NC — Not connected (per datasheet) |
| Pin 22 | NC — Not connected (per datasheet) |
| Pin 23 | NC — Not connected (per datasheet) |
| Pin 24 | NC — Not connected (per datasheet) |
| Pin EP | EP — Exposed thermal pad (must be soldered to copper pour) |
Typische Anwendungen
TLE9461ESXUMA1 ist geeignet für 6 Anwendungs: Automotive Body Control Module (BCM), HVAC Control ECU, Seat and Mirror Controller, Automotive Lighting ECU, CAN Gateway / Network Node, Industrial CAN-FD Sensor Module.
Automotive Body Control Module (BCM)
The TLE9461ESXUMA1 is well suited to 12 V body control modules because its 5 V/250 mA LDO directly supplies a small automotive MCU while the integrated ISO 11898-1 CAN FD transceiver connects to the vehicle CAN bus at up to 5 Mbit/s. With AEC-Q100 Grade 1 qualification across -40C to +125C and 8 kV HBM ESD on the CAN pins, the part survives harsh automotive transients including jump-start and load-dump. The exposed PG-TSDSO-24-1 pad ties into a copper pour to keep junction temperature in spec when the BCM drives relays and LEDs. Compared with discrete LDO + CAN designs, the SBC reduces BOM count and simplifies EMC layout, which shortens BCM development cycles.
Empfohlen
HVAC Control ECU
HVAC ECUs typically need a single CAN interface plus a clean 5 V rail for the blower/valve control MCU, which is exactly the TLE9461ESXUMA1 use case. The integrated 5 V/250 mA LDO supplies the MCU and small signal-chain ICs without an external regulator, while the CAN FD transceiver enables fast communication with the vehicle climate network. AEC-Q100 Grade 1 qualification and 5.5 V to 28 V input tolerance handle under-hood temperature swings and 12 V cranking dips. The watchdog supervises the HVAC MCU's software execution, triggering a reset if the MCU locks up and improving functional safety for cabin climate control.
Empfohlen
Seat and Mirror Controller
Seat and mirror controllers are small CAN nodes that require compact, low-power, automotive-qualified silicon, making the TLE9461ESXUMA1 a strong fit. The 5 V/250 mA LDO powers a small MCU plus a couple of motor-driver logic inputs, and the CAN FD interface participates in the body CAN bus at rates up to 5 Mbit/s. The 24-pin PG-TSDSO-24-1 footprint is small enough for integration inside the door-module housing, and the wide 5.5 V to 28 V input range tolerates cranking transients on the door wiring harness. Watchdog supervision adds functional safety by resetting the controller if the seat-position MCU enters an infinite loop.
Empfohlen
Automotive Lighting ECU
Front-lighting and rear-lighting ECUs benefit from the TLE9461ESXUMA1's small footprint and integrated watchdog, which together reduce PCB area for headlamp driver boards where space is at a premium. The 5 V LDO supplies the lighting MCU and CAN bus interface logic, while the CAN FD transceiver links to the vehicle lighting CAN network. AEC-Q100 Grade 1 and 125C ambient capability match under-hood and headlamp cavity conditions where temperature spikes are common. The exposed-pad package ties into a copper pour to dissipate heat from the LDO during sustained LED-driver control activity.
Empfohlen
CAN Gateway / Network Node
In a CAN gateway or simple network node, the TLE9461ESXUMA1 provides the regulated 5 V rail and the physical-layer CAN FD interface that connect a sub-network to the backbone. With 5 Mbit/s CAN FD capability and ISO 11898-1 compliance, the device keeps gateways ready for next-generation in-vehicle networks. The watchdog timer adds a layer of functional safety at the network boundary by monitoring the gateway MCU. The 5.5 V to 28 V input range supports both 12 V and 24 V bus systems, allowing the same hardware design to ship into passenger-car and commercial-vehicle platforms.
Empfohlen
Industrial CAN-FD Sensor Module
Outside automotive, the TLE9461ESXUMA1's wide input range (5.5 V to 28 V) and integrated 5 V LDO suit industrial CAN-FD sensor modules operating from 24 V supply rails. The CAN FD transceiver supports modern industrial protocols derived from CAN, while the watchdog adds supervisory functionality for unattended sensor installations. The exposed-pad PG-TSDSO-24-1 package is industrial-friendly for hand-soldered prototyping as well as volume SMT lines. Engineers benefit from Infineon's automotive-grade quality at industrial pricing when prototyping sensor nodes.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für TLE9461ESXUMA1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | TLE9471ESXUMA1 | TLE9261QX | TLE9278QXV33 |
|---|---|---|---|---|
| Package | PG-TSDSO-24-1 | PG-TSDSO-24-1 - same | PG-TSDSO-24-1 - same | PG-TSDSO-24-1 - same |
| Brand | Infineon | Infineon - same | Infineon - same | Infineon - same |
| LDO Output Voltage | 5 V | 5 V + 3.3 V | 5 V + 3.3 V | 5 V + 3.3 V + SMPS |
| LDO Output Current | 250 mA | 250 mA | 100 mA + 250 mA | up to 1.5 A combined |
| CAN Transceiver | CAN FD (1x) | CAN FD (1x) + LIN (1x) | CAN FD (1x) + LIN (1x) | CAN FD (2x) + LIN |
| CAN Data Rate | 5 Mbit/s | 5 Mbit/s | 5 Mbit/s | 5 Mbit/s |
| Watchdog | Window watchdog | Window watchdog | Window watchdog | Window watchdog + fail-safe |
| Automotive Grade | AEC-Q100 Grade 1 | AEC-Q100 Grade 1 | AEC-Q100 Grade 1 | AEC-Q100 Grade 1 |
Wichtigste Unterscheidungsmerkmale
- Minimum-feature Lite SBC for cost-sensitive CAN nodes (vs. TLE9278QXV33)
- Lower pin count than higher-end SBC siblings (vs. TLE9261QX)
- Exposed-pad PG-TSDSO-24-1 package with strong thermal path (vs. TLE9471ESXUMA1)
Designhinweise
Solder the exposed pad of the PG-TSDSO-24-1 package to a copper pour of at least 1 square centimeter to keep junction temperature within AEC-Q100 Grade 1 limits (-40C to +125C). Estimated: at VIN = 14 V, VOUT = 5 V, IOUT = 250 mA, the LDO dissipates roughly 2.25 W. Without a thermal pour, the rise would exceed the package's thermal budget; with a typical 1 oz copper pour the rise stays within spec. Use multiple thermal vias under the exposed pad for additional heat extraction.
Place the input capacitor network (100 nF ceramic in parallel with 4.7 µF ceramic) as close as possible to the VBAT pin to suppress automotive transients including jump-start and load-dump. Place the VCC output capacitor (4.7 µF) directly at the VCC pin to ensure stable LDO regulation. Keep the CANH/CANL traces short and impedance-controlled (~120 Ω differential) and route them away from switching nodes to meet IEC 62228-4 EMC requirements.
Route the CANH and CANL traces as a tightly coupled differential pair with matched lengths to maintain signal integrity at 5 Mbit/s CAN FD. Place the split-terminal CAN bus termination (typically 60 Ω total between CANH/CANL plus the SPLIT pin network) at the connector end of the bus, not near the SBC. Keep digital MCU traces (TXDC, RXDC) short and away from the VBAT supply trace to minimize crosstalk into the analog CAN transceiver.
Do not exceed the absolute maximum VBAT rating of 40 V during transient events - add a TVS diode such as SMBJ5.0A at the VBAT pin if long cable harness transients are expected. Avoid leaving the TEST pin floating during production; tie it to GND through a 10 kΩ resistor or to a defined logic level to prevent inadvertent entry into development mode. Ensure the watchdog timing configuration matches the MCU startup time, otherwise the SBC will assert RSTN prematurely after power-up.
Compliance-Informationen
AEC-Q100 Grade 1 qualified per Infineon datasheet. RoHS and REACH compliant. Halogen-free and lead-free per automotive-grade Infineon product family conventions.
