TLE9461ESXUMA1 - OPTIREG Lite SBC, 5V LDO + CAN FD | Infineon
Артикул: TLE9461ESXUMA1 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $2.97 | $29,70 |
| 100 | $2.58 | $258,00 |
| 500 | $2.21 | $1.105,00 |
| 1.000 | $1.94 | $1.940,00 |
| 3.000 | $1.71 | $5.130,00 |
TLE9461ESXUMA1 Обзор
A System Basis Chip (SBC) is a multi-functional power and communication IC that combines on a single die the voltage regulators, communication transceivers, and supervision features that an automotive Electronic Control Unit (ECU) needs to interface with a microcontroller and the vehicle bus. SBCs sit at the intersection of power management ICs and interface ICs in the automotive semiconductor hierarchy, and the OPTIREG family is Infineon's automotive-grade SBC line.
Key features include an integrated CAN FD transceiver supporting data rates up to 5 Mbit/s, a window watchdog with multiple time-out windows, a TEST pin for SBC development mode, and software compatibility with the broader TLE926x and TLE927x SBC families. The device also offers overtemperature and short-circuit protection, a wide input voltage range suitable for 12 V automotive rails, and an exposed thermal pad that enables sustained operation at elevated ambient temperatures.
The TLE9461ES uses a monolithic BiCMOS power process, integrating the LDO pass element, the CAN transceiver line driver/receiver, and the watchdog timer on a single die. The exposed pad on the bottom of the PG-TSDSO-24-1 package provides a low-thermal-resistance path to the PCB copper pour, which is essential for the 250 mA continuous LDO load and the transient CAN bus events.
Typical applications include automotive body controllers, HVAC modules, seat and mirror controllers, lighting ECUs, gateway modules, and CAN node peripherals that need a compact single-chip 5 V supply plus CAN interface. The wide input range also enables 12 V and 24 V truck-bus compatibility.
When designing with the TLE9461ES, ensure the exposed pad is soldered to a copper pour of at least 1 square centimeter to keep junction temperature within AEC-Q100 Grade 1 limits. Use Infineon's recommended 100 nF + 4.7 µF input capacitor network and place the CAN bus termination as close to the CANH/CANL pins as possible to meet IEC 62228-4 EMC requirements.
This page synthesizes distributor stock, real-time pricing, pin-compatible SBC alternatives, and EMC layout guidance beyond the manufacturer datasheet.
Аналоги без доработки для TLE9461ESXUMA1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с TLE9461ESXUMA1 (тот же форм-фактор и посадочное место) — отличается по CAN Data Rate, Package, Product Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
TLE9471ESXUMA1
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TLE9261QX
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TLE9278QXV33
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TLE9461ESXUMA1 Характеристики
| Product Type | System Basis Chip (Lite SBC) |
| Функция | 5 V LDO + CAN FD transceiver + Watchdog |
| LDO Output Voltage | 5 V (typical) |
| LDO Output Current | 250 mA |
| CAN Transceiver Standard | ISO 11898-1 (CAN FD) |
| CAN Data Rate | Up to 5 Mbit/s |
| Watchdog | Window watchdog (multiple time-out windows) |
| Диапазон входного напряжения | 5.5 V to 28 V (load-dump tolerant) |
| Рабочая температура | -40C to +125C (AEC-Q100 Grade 1) |
| Корпус | PG-TSDSO-24-1 (24-pin, exposed pad, 150 mil) |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 |
| ESD Protection (CAN bus) | 8 kV HBM (per datasheet) |
| Protection Features | Overtemperature, short-circuit, load dump |
| Software Compatibility | TLE926x and TLE927x SBC families |
| TEST Pin | Yes (SBC development mode entry) |
| Статус RoHS | Compliant |
| Automotive Qualification | AEC-Q100 Grade 1 |
Конфигурация выводов TLE9461ESXUMA1
| Контакт 1 | VBAT — Battery supply input (5.5 V to 28 V) |
| Контакт 2 | GND — Ground |
| Контакт 3 | VCC — 5 V LDO output to MCU |
| Контакт 4 | WK — Wake input |
| Контакт 5 | TEST — Test mode entry (development mode) |
| Контакт 6 | WD_DIS — Watchdog disable |
| Контакт 7 | WDO — Watchdog output to MCU |
| Контакт 8 | RSTN — Reset output (active low) |
| Контакт 9 | INTN — Interrupt output to MCU |
| Контакт 10 | TXDC — CAN transmit data from MCU |
| Контакт 11 | RXDC — CAN receive data to MCU |
| Контакт 12 | CANH — CAN bus high line |
| Контакт 13 | CANL — CAN bus low line |
| Контакт 14 | SPLIT — CAN bus common-mode stabilization |
| Контакт 15 | STB — Standby control input |
| Контакт 16 | EN — Enable input |
| Контакт 17 | NC — Not connected (per datasheet) |
| Контакт 18 | NC — Not connected (per datasheet) |
| Контакт 19 | NC — Not connected (per datasheet) |
| Контакт 20 | NC — Not connected (per datasheet) |
| Контакт 21 | NC — Not connected (per datasheet) |
| Контакт 22 | NC — Not connected (per datasheet) |
| Контакт 23 | NC — Not connected (per datasheet) |
| Контакт 24 | NC — Not connected (per datasheet) |
| Контакт EP | EP — Exposed thermal pad (must be soldered to copper pour) |
Типичное применение
TLE9461ESXUMA1 подходит для 6 применениеs: Automotive Body Control Module (BCM), HVAC Control ECU, Seat and Mirror Controller, Automotive Lighting ECU, CAN Gateway / Network Node, Industrial CAN-FD Sensor Module.
Automotive Body Control Module (BCM)
The TLE9461ESXUMA1 is well suited to 12 V body control modules because its 5 V/250 mA LDO directly supplies a small automotive MCU while the integrated ISO 11898-1 CAN FD transceiver connects to the vehicle CAN bus at up to 5 Mbit/s. With AEC-Q100 Grade 1 qualification across -40C to +125C and 8 kV HBM ESD on the CAN pins, the part survives harsh automotive transients including jump-start and load-dump. The exposed PG-TSDSO-24-1 pad ties into a copper pour to keep junction temperature in spec when the BCM drives relays and LEDs. Compared with discrete LDO + CAN designs, the SBC reduces BOM count and simplifies EMC layout, which shortens BCM development cycles.
Рекомендуется
HVAC Control ECU
HVAC ECUs typically need a single CAN interface plus a clean 5 V rail for the blower/valve control MCU, which is exactly the TLE9461ESXUMA1 use case. The integrated 5 V/250 mA LDO supplies the MCU and small signal-chain ICs without an external regulator, while the CAN FD transceiver enables fast communication with the vehicle climate network. AEC-Q100 Grade 1 qualification and 5.5 V to 28 V input tolerance handle under-hood temperature swings and 12 V cranking dips. The watchdog supervises the HVAC MCU's software execution, triggering a reset if the MCU locks up and improving functional safety for cabin climate control.
Рекомендуется
Seat and Mirror Controller
Seat and mirror controllers are small CAN nodes that require compact, low-power, automotive-qualified silicon, making the TLE9461ESXUMA1 a strong fit. The 5 V/250 mA LDO powers a small MCU plus a couple of motor-driver logic inputs, and the CAN FD interface participates in the body CAN bus at rates up to 5 Mbit/s. The 24-pin PG-TSDSO-24-1 footprint is small enough for integration inside the door-module housing, and the wide 5.5 V to 28 V input range tolerates cranking transients on the door wiring harness. Watchdog supervision adds functional safety by resetting the controller if the seat-position MCU enters an infinite loop.
Рекомендуется
Automotive Lighting ECU
Front-lighting and rear-lighting ECUs benefit from the TLE9461ESXUMA1's small footprint and integrated watchdog, which together reduce PCB area for headlamp driver boards where space is at a premium. The 5 V LDO supplies the lighting MCU and CAN bus interface logic, while the CAN FD transceiver links to the vehicle lighting CAN network. AEC-Q100 Grade 1 and 125C ambient capability match under-hood and headlamp cavity conditions where temperature spikes are common. The exposed-pad package ties into a copper pour to dissipate heat from the LDO during sustained LED-driver control activity.
Рекомендуется
CAN Gateway / Network Node
In a CAN gateway or simple network node, the TLE9461ESXUMA1 provides the regulated 5 V rail and the physical-layer CAN FD interface that connect a sub-network to the backbone. With 5 Mbit/s CAN FD capability and ISO 11898-1 compliance, the device keeps gateways ready for next-generation in-vehicle networks. The watchdog timer adds a layer of functional safety at the network boundary by monitoring the gateway MCU. The 5.5 V to 28 V input range supports both 12 V and 24 V bus systems, allowing the same hardware design to ship into passenger-car and commercial-vehicle platforms.
Рекомендуется
Industrial CAN-FD Sensor Module
Outside automotive, the TLE9461ESXUMA1's wide input range (5.5 V to 28 V) and integrated 5 V LDO suit industrial CAN-FD sensor modules operating from 24 V supply rails. The CAN FD transceiver supports modern industrial protocols derived from CAN, while the watchdog adds supervisory functionality for unattended sensor installations. The exposed-pad PG-TSDSO-24-1 package is industrial-friendly for hand-soldered prototyping as well as volume SMT lines. Engineers benefit from Infineon's automotive-grade quality at industrial pricing when prototyping sensor nodes.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TLE9461ESXUMA1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TLE9471ESXUMA1 | TLE9261QX | TLE9278QXV33 |
|---|---|---|---|---|
| Package | PG-TSDSO-24-1 | PG-TSDSO-24-1 - same | PG-TSDSO-24-1 - same | PG-TSDSO-24-1 - same |
| Brand | Infineon | Infineon - same | Infineon - same | Infineon - same |
| LDO Output Voltage | 5 V | 5 V + 3.3 V | 5 V + 3.3 V | 5 V + 3.3 V + SMPS |
| LDO Output Current | 250 mA | 250 mA | 100 mA + 250 mA | up to 1.5 A combined |
| CAN Transceiver | CAN FD (1x) | CAN FD (1x) + LIN (1x) | CAN FD (1x) + LIN (1x) | CAN FD (2x) + LIN |
| CAN Data Rate | 5 Mbit/s | 5 Mbit/s | 5 Mbit/s | 5 Mbit/s |
| Watchdog | Window watchdog | Window watchdog | Window watchdog | Window watchdog + fail-safe |
| Automotive Grade | AEC-Q100 Grade 1 | AEC-Q100 Grade 1 | AEC-Q100 Grade 1 | AEC-Q100 Grade 1 |
Ключевые отличия
- Minimum-feature Lite SBC for cost-sensitive CAN nodes (против TLE9278QXV33)
- Lower pin count than higher-end SBC siblings (против TLE9261QX)
- Exposed-pad PG-TSDSO-24-1 package with strong thermal path (против TLE9471ESXUMA1)
Заметки по проектированию
Solder the exposed pad of the PG-TSDSO-24-1 package to a copper pour of at least 1 square centimeter to keep junction temperature within AEC-Q100 Grade 1 limits (-40C to +125C). Estimated: at VIN = 14 V, VOUT = 5 V, IOUT = 250 mA, the LDO dissipates roughly 2.25 W. Without a thermal pour, the rise would exceed the package's thermal budget; with a typical 1 oz copper pour the rise stays within spec. Use multiple thermal vias under the exposed pad for additional heat extraction.
Place the input capacitor network (100 nF ceramic in parallel with 4.7 µF ceramic) as close as possible to the VBAT pin to suppress automotive transients including jump-start and load-dump. Place the VCC output capacitor (4.7 µF) directly at the VCC pin to ensure stable LDO regulation. Keep the CANH/CANL traces short and impedance-controlled (~120 Ω differential) and route them away from switching nodes to meet IEC 62228-4 EMC requirements.
Route the CANH and CANL traces as a tightly coupled differential pair with matched lengths to maintain signal integrity at 5 Mbit/s CAN FD. Place the split-terminal CAN bus termination (typically 60 Ω total between CANH/CANL plus the SPLIT pin network) at the connector end of the bus, not near the SBC. Keep digital MCU traces (TXDC, RXDC) short and away from the VBAT supply trace to minimize crosstalk into the analog CAN transceiver.
Do not exceed the absolute maximum VBAT rating of 40 V during transient events - add a TVS diode such as SMBJ5.0A at the VBAT pin if long cable harness transients are expected. Avoid leaving the TEST pin floating during production; tie it to GND through a 10 kΩ resistor or to a defined logic level to prevent inadvertent entry into development mode. Ensure the watchdog timing configuration matches the MCU startup time, otherwise the SBC will assert RSTN prematurely after power-up.
Информация о соответствии
AEC-Q100 Grade 1 qualified per Infineon datasheet. RoHS and REACH compliant. Halogen-free and lead-free per automotive-grade Infineon product family conventions.
