Texas Instruments

TLV2374IN - Quad 3MHz RRIO Op Amp | Texas Instruments

Teilenummer: TLV2374IN ✓ Aktiv
2.7 V Vdss Approximately 550 uA per channel Id 14-pin PDIP Package
MOQ: 1 |

TLV2374IN Übersicht

The Texas Instruments TLV2374IN is a quad, single-supply operational amplifier with rail-to-rail input and output capability, 3 MHz gain-bandwidth product, and approximately 550 uA of quiescent current per amplifier. The device operates from a minimum supply voltage of 2.7 V to a maximum recommended supply voltage of 16 V and is offered in a 14-pin PDIP package.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The TLV2374 belongs to the rail-to-rail-input/output operational amplifier family within the broader amplifier IC and semiconductor hierarchy. Rail-to-rail inputs let the amplifier operate close to the supply rails, while rail-to-rail output improves output-voltage range and signal headroom in low-voltage systems.

Each of the four amplifier channels combines a 3 MHz gain-bandwidth product with approximately 550 uA of quiescent current per channel. The device supports single-supply operation from 2.7 V through 16 V and provides approximately 2 V/us of slew rate. These characteristics make it useful for portable instrumentation, sensor signal conditioning, buffer stages, and low-voltage analog systems where four amplifier channels are required in one package.

The quad configuration provides four independent amplifiers while reducing package count compared with four separate single or dual devices. Common applications include amplifying outputs from pressure, temperature, current, and resistance sensors; buffering ADC inputs; driving low-capacitance analog stages; and amplifying low-frequency waveforms. Rail-to-rail input behavior is particularly useful when signals approach the lower or upper supply rail.

The TLV2374IN is packaged in a through-hole 14-pin PDIP. Unlike low-power micropower amplifier families optimized for kilohertz or low-hertz signals, its 3 MHz bandwidth provides greater margin for signal shaping, filtering, and general-purpose analog conditioning. System designers should still account for input and output common-mode limits, output-current capability, capacitive-load stability, supply bypass capacitance, and the operating temperature grade of the specific ordering code.

For PCB implementation, place the supply bypass capacitor close to the positive and negative supply pins, maintain short feedback paths, and verify settling behavior with the actual source impedance and load. This page combines the manufacturer’s device characteristics with package-specific guidance, application-oriented design notes, and drop-in replacement analysis for engineers evaluating the TLV2374IN.

Drop-in-Alternativen für TLV2374IN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit TLV2374IN (gleiche Bauform und Footprint) – abweichend in Mounting Type, Slew Rate.

National Semiconductor
Mounting Type: Through Hole, Surface Mount
Slew Rate: 0.5 V/µs
Vergleichen mit TLV2374IN →

TLV2374IP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 14-pin PDIP
Same 3 MHz quad RRIO architecture and 14-pin PDIP footprint; ordering code selects a different temperature grade, while core voltage, bandwidth, and current ratings remain aligned.

📋 Referenzalternative (nicht im Katalog)

TLV2374CN

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 14-pin PDIP
Same TLV2374 family, 3 MHz bandwidth, and 14-pin PDIP footprint; the CN ordering code specifies a different temperature grade from IN.

📋 Referenzalternative (nicht im Katalog)

TLV2374IN Grenzwerte & elektrische Eigenschaften

Number of Amplifier Channels 4 channels
Amplifier Type Single-supply operational amplifier
Gain-Bandwidth Product 3 MHz
Minimum Operating Supply Voltage 2.7 V
Maximum Recommended Supply Voltage 16 V
Ruhestrom Approximately 550 uA per channel
Slew Rate 2 V/us
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Operating Temperature Class Extended industrial temperature range
Package Type 14-pin PDIP
Montageart Through-hole
Anzahl der Pins 14 pins
Product Family TLV237x operational amplifier series
Supplier Configuration Quad amplifier with four independent channels

TLV2374IN Pin-Konfiguration

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin 1 OUT1 — Output of amplifier 1
Pin 2 IN1- — Inverting input of amplifier 1
Pin 3 IN1+ — Non-inverting input of amplifier 1
Pin 4 V+ — Positive supply voltage
Pin 5 IN2+ — Non-inverting input of amplifier 2
Pin 6 IN2- — Inverting input of amplifier 2
Pin 7 OUT2 — Output of amplifier 2
Pin 8 OUT3 — Output of amplifier 3
Pin 9 IN3- — Inverting input of amplifier 3
Pin 10 IN3+ — Non-inverting input of amplifier 3
Pin 11 V- — Negative supply voltage
Pin 12 IN4+ — Non-inverting input of amplifier 4
Pin 13 IN4- — Inverting input of amplifier 4
Pin 14 OUT4 — Output of amplifier 4

Typische Anwendungen

TLV2374IN ist geeignet für 6 Anwendungs: Low-Voltage Sensor Signal Conditioning, Precision ADC Input Buffer, Industrial Process Measurement, Portable Medical Monitoring, Low-Voltage Data Acquisition, Low-Frequency Filter and Buffer Stage.

🧩

Low-Voltage Sensor Signal Conditioning

The TLV2374IN is suitable for conditioning sensor outputs in 2.7 V to 16 V systems because each channel supports rail-to-rail input operation. Its approximately 550 uA quiescent current per channel helps control consumption in battery-powered instrumentation, while the 3 MHz gain-bandwidth product allows modest gain and filtering stages. A typical implementation buffers a sensor output before conversion by an ADC. The designer should account for sensor output impedance, ADC input capacitance, and the amplifier’s settling requirements.

📺

Precision ADC Input Buffer

The TLV2374IN can provide four independent input buffers for moderately fast ADC front ends. Rail-to-rail input behavior is useful when the converter’s valid input range extends near either supply rail, and the 3 MHz gain-bandwidth product gives more bandwidth than typical low-power micropower amplifiers. Use the device as a voltage follower when isolation is more important than voltage gain. Validate acquisition time, capacitive loading, and output settling against the ADC requirements.

🏭

Industrial Process Measurement

The TLV2374IN suits process-measurement circuits that amplify small signals from resistive bridges, current sensors, and industrial transducers. Four channels reduce the number of packages required for a multi-input measurement board, while rail-to-rail input operation increases usable range in low-voltage systems. The 3 MHz bandwidth is adequate for many low- to moderate-bandwidth measurements. Common-mode voltage, transient protection, grounding, and input filtering must be addressed separately from the amplifier selection.

💊

Portable Medical Monitoring

The TLV2374IN is appropriate for compact monitoring modules that process low-frequency physiological or diagnostic sensor signals from a 2.7 V or 3.3 V supply. Approximately 550 uA of quiescent current per channel helps limit power demand, and four channels support simultaneous signal conditioning without requiring four separate packages. Rail-to-rail inputs improve headroom when sensor outputs occupy much of the available voltage range. Medical designs must also evaluate isolation, leakage, safety, and application-specific standards separately.

🖥️

Low-Voltage Data Acquisition

The TLV2374IN provides four channels for multiplexing or buffering multiple low-voltage data-acquisition inputs. Its 3 MHz gain-bandwidth product allows useful closed-loop bandwidth for moderate-speed acquisition, and the low quiescent current supports compact embedded systems. A practical design can use two channels for differential inputs and two for instrumentation or reference buffering. Confirm amplifier settling at the selected closed-loop gain and design the anti-alias filter independently to avoid noise or stability problems.

🔧

Low-Frequency Filter and Buffer Stage

The TLV2374IN can implement active filters, sample-and-hold buffers, and gain stages around slow or moderate-bandwidth signals. Its 3 MHz bandwidth provides useful loop gain above the signal band, while approximately 2 V/us slew rate helps preserve large-signal behavior. Four channels allow related filtering functions to share one package. Component tolerances, input bias-current effects, output loading, and capacitor stability should be evaluated during simulation rather than inferred only from the gain-bandwidth value.

Zusammenfassung der empfohlenen Produkte

TLV2374IDR Same TLV2374 family in a 14-pin SOIC package Verwendet in: Low-Voltage Sensor Signal Conditioning, Portable Medical Monitoring, Low-Frequency Filter and Buffer Stage TLV2374IPW Same TLV2374 family in a 14-pin TSSOP package Verwendet in: Low-Voltage Sensor Signal Conditioning, Portable Medical Monitoring, Low-Frequency Filter and Buffer Stage ADS1131IDR Texas Instruments Verwendet in: Precision ADC Input Buffer ADS1262IPW Texas Instruments Verwendet in: Precision ADC Input Buffer, Low-Voltage Data Acquisition INA240A4DR Texas Instruments Verwendet in: Industrial Process Measurement OPA828ID Texas Instruments Verwendet in: Industrial Process Measurement ADS8519IDB Texas Instruments Verwendet in: Low-Voltage Data Acquisition
What is the operating voltage of TLV2374IN?
The TLV2374IN operates from a minimum supply voltage of 2.7 V to a maximum recommended supply voltage of 16 V. According to the manufacturer datasheet, this range supports both low-voltage portable systems and higher-voltage industrial analog circuits. The four amplifier channels share the same positive and negative supply pins, so each channel operates over the full device supply range.
What are the key specifications of TLV2374IN that engineers should know?
The TLV2374IN is a quad operational amplifier with 3 MHz gain-bandwidth product, rail-to-rail input and output operation, approximately 550 uA quiescent current per channel, and approximately 2 V/us slew rate. According to the manufacturer datasheet, it operates from 2.7 V to 16 V and is packaged in a 14-pin PDIP. The four-channel configuration supports analog conditioning, buffering, and amplification.
Where can I download the TLV2374IN datasheet PDF?
The official TLV2374IN datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/ds/symlink/tlv2374.pdf. The document covers the TLV237x family and includes the electrical characteristics, application information, package drawings, and pin descriptions needed to evaluate the 14-pin PDIP configuration. Use the ordering information to confirm the TLV2374IN temperature and package variant.
Where can I find the TLV2374IN pinout?
The TLV2374IN pinout is documented in the pin-configuration section of the manufacturer datasheet and in the 14-pin PDIP package drawing. Pins 1 through 8 carry the first two amplifier channels and the positive supply, while pins 9 through 14 carry the remaining channels and the negative supply. Use the datasheet pin table when assigning PCB nets and amplifier inputs.
Is TLV2374IN suitable for low-voltage sensor interfaces?
The TLV2374IN is suitable for low-voltage sensor interfaces because its rail-to-rail inputs preserve signal range near the supply rails and its 2.7 V minimum supply supports single-cell or 3.3 V systems. The 3 MHz bandwidth also provides more signal-processing capability than typical kilohertz micropower amplifiers. Confirm the sensor output range and required settling accuracy before finalizing the gain and filter network.
What can replace TLV2374IN in a 14-pin PDIP design?
The closest same-family replacement is TLV2374IP, which retains the 14-pin PDIP footprint and the TLV2374 quad amplifier architecture but represents a different ordering-code temperature option. Before replacing the device, compare the manufacturer’s ordering table, absolute maximum ratings, and electrical characteristics for the exact suffix. Pin-to-pin substitution does not automatically make every temperature grade interchangeable for all applications.
Is TLV2374IN the same as TLV2374IP?
The TLV2374IN and TLV2374IP are closely related 14-pin PDIP quad operational amplifiers with the same 3 MHz rail-to-rail amplifier family, but their ordering codes can specify different temperature grades. According to the manufacturer ordering information, engineers should compare the exact suffix ratings before substitution. The physical pin arrangement remains compatible, while environmental suitability determines whether the alternative is acceptable.
TLV2374IN vs TLV2374IP — which is better for industrial equipment?
The TLV2374IN vs TLV2374IP decision depends primarily on the required temperature grade rather than the core amplifier specifications. Both devices use a 14-pin PDIP package and provide four 3 MHz rail-to-rail channels, but the suffix determines the applicable temperature range. Select the ordering code whose rated range covers the worst-case enclosure temperature rather than assuming the newer or older suffix is automatically superior.
When should I choose TLV2374IN over a single-channel amplifier?
Choose the TLV2374IN when the circuit needs four independent amplifier channels, particularly in sensor-conditioning or multi-signal designs. Four channels in one 14-pin PDIP can reduce board area and package count relative to separate single amplifiers. Select a single-channel device instead when only one channel is needed, when channel-specific shutdown is required, or when the alternate device offers a narrower package with lower total board cost.
What is the best Texas Instruments equivalent for TLV2374IN?
The best same-manufacturer candidate is TLV2374IP because it retains the quad operational amplifier architecture and 14-pin PDIP footprint while offering a different ordering-code temperature option. According to the manufacturer’s TLV2374 family documentation, both parts share the core 3 MHz rail-to-rail design. Confirm the exact electrical limits and temperature range for the replacement before approving it as a drop-in device.
How much current does the TLV2374IN consume?
The TLV2374IN consumes approximately 550 uA of quiescent current per amplifier channel. Four active channels therefore consume approximately 2.2 mA under the stated quiescent-current condition, before output-current and application-specific loads are included. The manufacturer datasheet identifies this low-current capability as a key feature of the 3 MHz TLV237x family.
Does the TLV2374IN support rail-to-rail input and output?
The TLV2374IN supports rail-to-rail input and output operation. According to the manufacturer datasheet, rail-to-rail inputs are useful when the signal can approach either supply rail, while the rail-to-rail output swing provides improved output headroom in low-voltage circuits. Output-current limits, load conditions, and stability requirements still apply when driving a particular external circuit.
Where to buy TLV2374IN online?
Use the Request a Quote form on this XAIPART product page to request TLV2374IN availability, quantity breaks, and delivery terms for the 14-pin PDIP package. The form is the appropriate channel for current stock, minimum order quantity, and lead-time confirmation. Confirm the exact MPN, package, and required quantity before submitting the request.
What is the price of TLV2374IN?
Current TLV2374IN pricing depends on order quantity, packaging, and market availability. Use the Request a Quote form on this page to obtain a current quotation for the exact 14-pin PDIP part. Request the quantity tiers you plan to manufacture and include any required traceability or temperature-grade documentation in the inquiry.
What is the lead time and stock status for TLV2374IN?
Current stock and lead time for TLV2374IN should be confirmed through the Request a Quote form on this XAIPART page. Lead time can vary with order quantity, scheduled manufacturing volumes, and packaging requirements. State your required quantity, target date, and whether unbroken quantities are necessary when requesting the quotation.
Can TLV2374IN be used for ADC input buffering?
The TLV2374IN can be used for ADC input buffering when the ADC input can be driven by a rail-to-rail operational amplifier and the selected channel has suitable settling behavior. Its 3 MHz gain-bandwidth product provides useful bandwidth for many moderate-rate acquisition systems, while approximately 550 uA per channel supports power-conscious designs. Validate capacitive loading and acquisition timing against the ADC datasheet.

Technische Referenzdaten für TLV2374IN – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the TLV2374IN when a design requires four 3 MHz rail-to-rail operational-amplifier channels, operation from 2.7 V to 16 V, and a 14-pin PDIP footprint. It is particularly useful for compact industrial, instrumentation, and low-voltage data-acquisition boards where four separate amplifier packages would increase board area. TLV2374IP is the closest same-family alternative when its specified temperature grade better matches the product’s environmental requirements; the physical footprint and core amplifier ratings remain aligned. TLV2374CN provides another same-family PDIP option but requires confirmation that its temperature range covers the design. For applications needing smaller surface-mount packages, TLV2374IDR and TLV2374IPW offer the same family in 14-pin SOIC and TSSOP packages, respectively, but they are not direct replacements for a PDIP PCB without layout changes.

Vergleich mit Alternativen

Parameter Dieses Produkt TLV2374IP TLV2374CN
Package 14-pin PDIP 14-pin PDIP 14-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments
Number of Amplifier Channels 4 channels 4 channels 4 channels
Gain-Bandwidth Product 3 MHz 3 MHz 3 MHz
Operating Supply Range 2.7 V to 16 V 2.7 V to 16 V 2.7 V to 16 V
Quiescent Current Approximately 550 uA per channel Approximately 550 uA per channel Approximately 550 uA per channel
Slew Rate 2 V/us 2 V/us 2 V/us
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail
Ordering-Code Temperature Option IN ordering code IP ordering code CN ordering code

Wichtigste Unterscheidungsmerkmale

  • Four independent 3 MHz amplifier channels in one through-hole package (vs. TLV2374IP)
  • Rail-to-rail input and output operation in a low-voltage device (vs. TLV2374CN)
  • Low quiescent current without sacrificing 3 MHz bandwidth (vs. TLV2374IP)

Designhinweise

Place the supply bypass capacitor close to pins 4 and 11, and keep the ground return path short to reduce supply noise and output instability. Route feedback components close to their associated amplifier pins so parasitic capacitance does not add unwanted poles. For sensitive measurements, keep analog input and output traces away from switching nodes and high-current return paths.

Validate settling time with the actual feedback network and ADC input capacitance. A 3 MHz gain-bandwidth product does not by itself guarantee adequate acquisition time at high closed-loop gain or with a large capacitive load. Add an isolation resistor when required by the amplifier stability guidance, and verify the complete input-to-output step response during prototype testing.

Do not assume rail-to-rail operation eliminates input common-mode restrictions under every output condition. The usable input range can depend on output voltage, supply level, and channel configuration. Review the manufacturer’s electrical-characteristics plots for the intended gain, output level, supply voltage, and temperature before selecting input and feedback values.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was established for this ordering code. The TLV2374 family supports industrial-temperature operation, but the standard TLV2374IN is not identified as an AEC-Q100-qualified automotive variant.

Daten verifiziert am: 2026-11-19 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

TLV2374IN datasheet TLV2374IN pinout TLV2374IN datasheet pdf TLV2374IN 14-PDIP TLV2374IN 3 MHz op amp TLV2374IN rail-to-rail TLV2374IN 2.7 V to 16 V Texas Instruments TLV2374IN TLV2374IN equivalent TLV2374IN replacement TLV2374IN vs TLV2374IP TLV2374IN sensor signal conditioning TLV2374IN ADC input buffer TLV2374IN price TLV2374IN stock

Verwandte Bauteile & Begriffe

Texas Instruments TLV2374IN TLV2374IP TLV2374CN TLV2374IDR TLV2374IPW quad operational amplifier operational amplifier analog amplifier amplifier IC semiconductor rail-to-rail input rail-to-rail output RRIO 3 MHz gain-bandwidth product 550 uA quiescent current 2 V/us slew rate single-supply operation 2.7 V minimum supply voltage 16 V maximum recommended supply voltage 14-pin PDIP PDIP package family through-hole surface-mount technology sensor signal conditioning ADC input buffering
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen