Texas Instruments

TLV2450CP - 6V 220kHz Low-Power RRIO Op Amp | Texas Instruments

Teilenummer: TLV2450CP ✓ Aktiv
2.7 V to 6 V Vdss 23 uA Id PDIP-8 (P) Package
MOQ: 1 |

TLV2450CP Übersicht

Texas Instruments TLV2450CP is a single operational amplifier with rail-to-rail input and output capability, a 6 V maximum supply voltage, 220 kHz gain-bandwidth product, and 23 uA typical quiescent current. The device is offered in an 8-pin PDIP package and includes shutdown functionality, making it suitable for low-voltage instrumentation, sensor signal chains, and portable systems where power efficiency and input flexibility are important.

An operational amplifier, or op amp, is a high-gain analog building block used to amplify small voltage signals, buffer inputs, compare voltages, and drive analog-to-digital converter inputs. The TLV2450 belongs to the rail-to-rail input/output operational-amplifier family, where rail-to-rail input operation improves access to the supply-voltage range and rail-to-rail output operation increases output-voltage swing. Its low quiescent current reduces the supply demand of battery-powered and always-on circuits.

The main advantages are 220 kHz gain-bandwidth product, approximately 23 uA typical quiescent current, and operation from a single 6 V supply or a 2.7 V to 6 V supply range. The rail-to-rail input stage accepts signals near either supply rail, while the rail-to-rail output stage supports low-voltage signal conditioning with limited headroom. A shutdown function provides a way to reduce operating demand when the amplifier is not needed. These characteristics suit compact, low-power signal-processing systems without requiring a high-speed amplifier.

The TLV2450 is a general-purpose amplifier rather than a precision or high-current output device. Its 10 mA per channel output-current capability and 220 kHz bandwidth are appropriate for sensors, filters, and low-frequency analog stages, but not for demanding load driving, very wide-band instrumentation, or high-accuracy measurement rails. Designers should verify input and output common-mode limits, capacitive-load stability, shutdown behavior, and output-current requirements against the manufacturer datasheet before committing a design.

Typical uses include battery-powered sensor interfaces, portable measurement equipment, low-voltage audio and control circuits, analog signal conditioning, and embedded analog front ends. The 8-pin PDIP package favors through-hole prototyping, educational instruments, and applications where a socketed or easily inspectable amplifier is useful. The single-amplifier configuration also keeps board requirements simple when only one analog channel is required.

A primary design consideration is supply bypassing. Place a suitable local capacitor at the power pin and keep return-current paths short to reduce supply ripple and instability. Avoid driving long capacitive loads directly without checking the recommended output-capacitance limits. If shutdown is used, define its logic levels and state transitions carefully so the amplifier cannot oscillate between operating and shutdown modes.

This page combines the manufacturer's device characteristics, package information, practical application guidance, verified source links, and an explicit treatment of replacement constraints. The TLV2450CP is best selected when low quiescent current, rail-to-rail signal access, shutdown capability, and an 8-pin PDIP footprint are more important than precision, high-current output, or very high bandwidth.

Drop-in-Alternativen für TLV2450CP – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit TLV2450CP (gleiche Bauform und Footprint) – abweichend in Amplifier Type, Input Offset Voltage, Package.

Texas Instruments
Amplifier Type: Single general-purpose operational amplifier
Input Offset Voltage: ±10 mV
Package: 8-pin PDIP
Vergleichen mit TLV2450CP →

TLV2450IP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 8-pin PDIP (P)
Single general-purpose operational amplifier · 1 channel · 23 µA per channel · 220 kHz · 6 V · Rail-to-rail input · Rail-to-rail output · Yes

Preis auf Anfrage

Datenblatt ansehen →

TLV2450AIP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 8-pin PDIP (P)
Uses the A-version family specifications and industrial temperature grade; electrical differences are limited to the manufacturer-defined A-version characteristics.

📋 Referenzalternative (nicht im Katalog)

TLV2450CP Grenzwerte & elektrische Eigenschaften

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Supply Voltage Range 2.7 V to 6 V
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 220 kHz
Typical Quiescent Current 23 uA
Input Offset Voltage 500 uA
Output Current per Channel 10 mA
Common-Mode Input Rail-to-rail
Output Swing Rail-to-rail
Shutdown Function Yes
Anzahl der Pins 8 pins
Gehäuse PDIP-8 (P)
Body Width 0.300 in (7.62 mm)
Betriebstemperaturbereich 0 C to 70 C
Montageart Through-hole

TLV2450CP pdip-8 (p) Pinbelegungsleitfaden

Pinbelegung für TLV2450CP (pdip-8 (p)-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für TLV2450CP im pdip-8 (p)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TLV2450CP.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TLV2450CP ist geeignet für 6 Anwendungs: Battery-Powered Sensor Signal Conditioning, Portable Measurement Instrumentation, Low-Voltage Active Filtering, Portable Audio Preamplification, Low-Power Threshold Detection, Industrial Control Signal Buffering.

🔋

Battery-Powered Sensor Signal Conditioning

The TLV2450CP fits low-power sensor front ends because its approximately 23 uA typical quiescent current limits amplifier overhead in battery-powered equipment. Rail-to-rail input capability is valuable when the sensor output approaches a 3.3 V or 5 V rail, while rail-to-rail output provides useful headroom in low-voltage conditioning stages. The device can buffer, amplify, or filter a slowly varying sensor signal when the 220 kHz gain-bandwidth product exceeds the required closed-loop bandwidth. Check offset voltage, output-current demand, and noise requirements before using it for high-accuracy measurements.

🖥️

Portable Measurement Instrumentation

Portable meters and compact data-acquisition systems benefit from the TLV2450CP's 220 kHz gain-bandwidth product and low 23 uA typical quiescent current. The amplifier can condition slow sensor, transducer, or divider signals without adding a high-current supply requirement to the instrument. Its rail-to-rail input stage helps preserve signal range in a low-voltage design, and the shutdown control can be useful when a measurement channel is inactive. For precision results, verify input offset, input bias current, output swing, and stability against the required measurement accuracy.

📡

Low-Voltage Active Filtering

The TLV2450CP can implement first-order and modest higher-order active filters when the signal bandwidth is well below its 220 kHz gain-bandwidth product. Rail-to-rail input and output behavior is useful in filters powered from 2.7 V to 6 V, especially when filter nodes must approach the available signal range. The approximately 23 uA quiescent current keeps continuous filtering demand modest. Component tolerances and amplifier noise can set the practical filter accuracy, so simulate the complete response and verify stability with the intended source and load impedances.

🎧

Portable Audio Preamplification

The TLV2450CP is suitable for low-level preamplification in portable audio equipment when the source impedance and output load are compatible with a general-purpose amplifier. Its rail-to-rail input and output stages provide useful voltage range from a low-voltage supply, and the 220 kHz gain-bandwidth product covers many audible and ultrasonic low-bandwidth filtering requirements. The 10 mA per channel output-current rating makes it better suited to high-impedance audio paths than low-impedance headphone or speaker loads. Confirm input offset, noise, slew behavior, and capacitive-load stability before deployment.

⚡

Low-Power Threshold Detection

The TLV2450CP can compare a sensor or control voltage against a reference in battery-powered threshold-detection circuits. Rail-to-rail input operation allows the comparison signal to occupy more of the available 2.7 V to 6 V range, while rail-to-rail output improves drive capability for a downstream logic input. Its approximately 23 uA typical quiescent current supports low average system demand, and shutdown can disable the channel when monitoring is unnecessary. Confirm output logic levels, offset-induced switching uncertainty, input noise, and any feedback-network restrictions in the final circuit.

🏭

Industrial Control Signal Buffering

The TLV2450CP can buffer control, feedback, and sensor signals in low-voltage industrial subsystems where the operating range is 2.7 V to 6 V. Its rail-to-rail input and output behavior reduces signal-span loss near the supply rails, and the 220 kHz gain-bandwidth product is appropriate for many slow control loops. The single-amplifier PDIP package also simplifies through-hole assembly and field servicing. Do not use the 10 mA output-current capability for direct actuator drive; instead verify the load and add a suitable driver stage when more current or voltage swing is required.

What are the key specifications of TLV2450CP that engineers should know?
The TLV2450CP is a single, low-power operational amplifier with rail-to-rail input and output, a 220 kHz gain-bandwidth product, approximately 23 uA typical quiescent current, and shutdown support. According to the Texas Instruments product page, it operates from a 2.7 V to 6 V supply range and is packaged in an 8-pin PDIP. These characteristics make it appropriate for portable instrumentation, sensor interfaces, filtering, buffering, and low-voltage analog control systems where low supply demand is a priority.
What is the operating voltage range of TLV2450CP?
The TLV2450CP operates from 2.7 V to 6 V and has a 6 V maximum supply voltage. According to the Texas Instruments TLV2450 family datasheet, it can also operate with a split supply whose total voltage is no greater than 6 V. This range covers common low-voltage analog systems, including 3.3 V and 5 V rails. The supply limits, input common-mode range, and output-swing limits should be checked independently because they are not identical specifications.
What is the gain-bandwidth product and quiescent current of TLV2450CP?
The TLV2450CP has a gain-bandwidth product of 220 kHz and a typical quiescent current of approximately 23 uA. The Texas Instruments product page identifies both values for the TLV2450 family. The bandwidth supports low-frequency amplification, filtering, and buffering, while the low quiescent current reduces power consumption in battery-operated equipment. It is not intended for high-speed video, high-frequency signal conditioning, or applications requiring very low offset voltage.
Where can I download the TLV2450CP datasheet PDF?
The TLV2450CP datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/slos218f/slos218f.pdf. The document covers the TLV2450 amplifier family, including electrical characteristics, pin configurations, typical performance curves, shutdown operation, and application information. Use the manufacturer's pin-description table when assigning the 8-pin PDIP connections and verify the operating limits for the specific supply configuration used in the design.
Where can I find the TLV2450CP pinout?
The TLV2450CP pinout is identified in the pin-configuration section of the Texas Instruments TLV2450 family datasheet, and the device is offered as an 8-pin PDIP. Use the PDF at https://www.ti.com/lit/ds/slos218f/slos218f.pdf to confirm the power, input, output, shutdown, and no-connect assignments. Do not infer the shutdown polarity or pin numbering from another package; verify each connection against the package-specific drawing before PCB layout or assembly.
Is TLV2450CP suitable for battery-powered sensor interfaces?
Yes, the TLV2450CP is suitable for many battery-powered sensor interfaces because it combines rail-to-rail input and output operation with approximately 23 uA typical quiescent current. Its 2.7 V to 6 V supply range also fits common low-energy rails. The amplifier can buffer or amplify a sensor signal when the required bandwidth and output current remain within its limits. Account for sensor current, load current, leakage, and shutdown-state behavior when calculating the complete system's power budget.
What can replace the TLV2450CP on the same PCB?
A suitable replacement must use the same 8-pin PDIP footprint, preserve the power, input, output, and shutdown connections, and remain within the original circuit's voltage, bandwidth, offset, output-current, and stability requirements. The cross-reference results did not identify a verified substitute with enough pin-level detail to recommend one confidently. Treat any candidate as provisional until its manufacturer datasheet confirms pinout and the electrical limits in your exact configuration.
Is the TLV2450CP the same as an alternative low-power rail-to-rail op amp?
No generic low-power rail-to-rail operational amplifier is automatically equivalent to the TLV2450CP. The comparison must include the 8-pin PDIP pinout, shutdown function and logic polarity, 2.7 V to 6 V supply range, 220 kHz gain-bandwidth product, approximately 23 uA quiescent current, offset behavior, output-current capability, and capacitive-load stability. A functionally similar amplifier may require different connections or exhibit different shutdown behavior, so verify the package-specific datasheet before substitution.
When should I choose TLV2450CP instead of a faster operational amplifier?
Choose the TLV2450CP when the application is a low-voltage, low-frequency analog stage that benefits from approximately 23 uA typical quiescent current and rail-to-rail input/output capability. Its 220 kHz gain-bandwidth product is suitable for ordinary buffering, filtering, and sensor conditioning. Select a faster amplifier instead when the signal bandwidth, closed-loop gain, settling requirements, output-current demand, or driving capability exceeds what the TLV2450CP can provide.
What is the best Texas Instruments equivalent for TLV2450CP?
The closest Texas Instruments candidate must be selected from a part with the same 8-pin PDIP pinout and equivalent shutdown, electrical, and stability characteristics. The cross-reference results did not expose a verified substitute with sufficient pin-level information for a defensible recommendation. Compare the manufacturer pin table and complete operating specifications rather than treating another member of the TLV2450 family as interchangeable, because package code, temperature grade, and shutdown details may differ.
Where to buy TLV2450CP online and is it in stock?
Use the Request a Quote form on this page to request current TLV2450CP availability, commercial terms, and lead time. The product page identifies the TLV2450CP as a Texas Instruments device in an 8-pin PDIP package, while distributor inventory changes independently by package suffix and order quantity. Request the exact MPN TLV2450CP so the manufacturer specification, packaging, and shipment condition match the intended assembly.
What is the price of TLV2450CP?
Use the Request a Quote form on this page for the current TLV2450CP price and quantity-break availability. Commercial pricing depends on order quantity, exact manufacturer package suffix, inventory position, and purchasing terms. No static price is published here because it can change without notice. Include your required quantity, target packaging, shipment destination, and production schedule when requesting a quotation.
What is the lead time for TLV2450CP?
Request the current TLV2450CP lead time through the Request a Quote form on this page. Lead time depends on order quantity, factory availability, and the exact package suffix. The manufacturer's product listing identifies TLV2450CP as an 8-pin PDIP configuration, so provide that full MPN and your required delivery quantity. For production planning, ask the supplier to confirm the date on which the complete quantity is available for shipment.
How does the TLV2450CP shutdown function affect circuit design?
The shutdown function lets a circuit disable the amplifier when active signal processing is unnecessary, reducing power demand in battery-sensitive systems. Texas Instruments describes the TLV2450 family as including shutdown functionality, but the application must use the correct logic level and account for shutdown-state output behavior. Ensure control signals remain stable during startup and that the shutdown function is not required for a continuous feedback-loop application where an inactive output could invalidate system operation.
What design constraints matter for a TLV2450CP analog front end?
The main constraints are supply range, rail-to-rail input/output behavior, approximately 23 uA quiescent current, 220 kHz bandwidth, and the output-current limit of 10 mA per channel. According to the Texas Instruments datasheet family information, the device is intended for low-power general-purpose amplification. Check common-mode range, offset voltage, output swing, capacitive-load stability, and shutdown logic in the actual circuit, and provide local supply bypassing with a short return path.

Technische Referenzdaten für TLV2450CP – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the TLV2450CP for a low-voltage, single-amplifier design that needs rail-to-rail input and output operation, approximately 23 uA typical quiescent current, a 220 kHz gain-bandwidth product, and shutdown control in an 8-pin PDIP package. It is particularly useful for portable instrumentation, sensor buffering, active filtering, and slow control-signal conditioning. Choose a faster amplifier when settling time, bandwidth, or slew-rate requirements exceed this device's capabilities. Choose a precision amplifier when offset voltage and drift are critical. Choose a higher-current output amplifier for low-impedance loads. A replacement should be selected only after its manufacturer datasheet confirms the same 8-pin PDIP connections, shutdown behavior, supply limits, electrical performance, and stability in the target circuit.

Designhinweise

Place the supply bypass capacitor close to the TLV2450CP power pin and connect it to a low-impedance ground return. Keep the input and feedback traces short, particularly when the amplifier drives a capacitive load. The 8-pin PDIP package allows through-hole accessibility, but lead spacing and routed return paths still require careful layout. Because this is a general-purpose low-power amplifier, verify output stability with the actual source impedance, load, and external capacitance rather than assuming every reactive load is acceptable.

Budget the approximately 23 uA typical quiescent current as part of the total amplifier supply demand, then add output-current consumption from the load. Estimated: at a 3.3 V supply and 23 uA quiescent current, the amplifier's own quiescent supply power is 75.9 uW. This estimate excludes load current, input bias effects, and shutdown-state consumption. Confirm the actual operating points against the datasheet before using it to size a battery or energy budget.

Do not treat rail-to-rail input or output as unlimited voltage range. The input common-mode limits, output-swing limits, and maximum 6 V supply rating remain authoritative. Likewise, the 10 mA per channel output-current capability is not a guarantee that every load can be driven at that current. Check the source and load impedances, required output amplitude, shutdown state, and permitted capacitive loading before releasing the PCB or production design.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product information identifies the TLV2450CP as a commercial-temperature, 8-pin PDIP operational amplifier. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the available product information.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

TLV2450CP datasheet TLV2450CP datasheet pdf TLV2450CP pinout TLV2450CP specifications Texas Instruments TLV2450CP TLV2450CP equivalent TLV2450CP replacement TLV2450CP cross reference TLV2450CP 220kHz op amp TLV2450CP rail-to-rail input output TLV2450CP PDIP-8 TLV2450CP sensor signal conditioning TLV2450CP price TLV2450CP stock TLV2450CP low power op amp

Verwandte Bauteile & Begriffe

Texas Instruments TLV2450CP TLV2450 operational amplifier op amp rail-to-rail input rail-to-rail output low-power amplifier analog signal conditioning gain-bandwidth product quiescent current input offset voltage shutdown function PDIP-8 DIP package through-hole package semiconductor integrated circuit amplifier IC sensor interface active filter 2.7 V to 6 V supply 220 kHz 23 uA 10 mA output current
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen