Texas Instruments

TLV2461CP - 6.4MHz RRIO Op Amp | Texas Instruments

Teilenummer: TLV2461CP ✓ Aktiv
6 V Vdss 8-pin PDIP Package
MOQ: 1 |

TLV2461CP Übersicht

Texas Instruments TLV2461CP is a single-circuit, 6 V, 6.4 MHz rail-to-rail input/output operational amplifier packaged in an 8-pin PDIP. It combines a 6.4 MHz gain-bandwidth product with rail-to-rail input and output capability, making it suitable for portable instrumentation, low-voltage signal conditioning, and general-purpose analog systems.

An operational amplifier is an active analog circuit block that amplifies the voltage difference between its inverting and non-inverting inputs. Rail-to-rail input operation allows signals to approach the supply rails, while rail-to-rail output operation gives designers additional output swing near the limits of the available supply voltage. In the broader device hierarchy, the TLV2461CP belongs to the operational-amplifier and analog-signal-chain categories rather than the digital IC or power-management categories.

The TLV2461 family is identified by Texas Instruments as a family of low-power, rail-to-rail input/output operational amplifiers with shutdown capability. The TLV2461CP provides one amplifier circuit in a through-hole PDIP package, which supports prototyping, educational platforms, and industrial assemblies where leaded components are preferred. Its stated 6.4 MHz bandwidth provides substantially more signal-path flexibility than low-frequency general-purpose amplifiers.

A 6 V maximum supply rating supports operation from low-voltage portable systems, while the single-amplifier configuration avoids unused circuitry in applications needing one signal channel. Rail-to-rail inputs are useful when sensing small signals near a lower supply rail, and rail-to-rail outputs help preserve dynamic range when driving a subsequent analog stage. The 8-pin PDIP format also simplifies socket-based construction and hand-soldered prototype assembly compared with a fine-pitch surface-mount package.

Typical uses include low-voltage sensor interfaces, portable measurement equipment, audio and communication signal conditioning, buffer stages, and active filtering. In a portable sensor circuit, the amplifier can sit close to the sensor and process a weak bipolar or unipolar signal before further conditioning. In an active-filter design, its 6.4 MHz bandwidth provides the transition-frequency and phase-margin margin needed for moderate-bandwidth filtering stages.

Design should account for common-mode range, output swing, input bias current, noise, stability, and load capability under the actual supply voltage. Decoupling capacitors should be placed close to the supply pins, and signal routing should minimize parasitic capacitance. Because the TLV2461CP is a leaded PDIP device, board designers should also preserve adequate hole spacing and verify the orientation mark before soldering.

This product page combines the manufacturer identity, ordering package, primary electrical headline, lifecycle context, sourcing guidance, and practical design considerations. It also distinguishes genuine same-package alternatives from parts that merely perform a similar function, helping engineers evaluate replacement decisions without assuming that package compatibility alone guarantees equivalent performance.

Drop-in-Alternativen für TLV2461CP – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit TLV2461CP (gleiche Bauform und Footprint) – abweichend in Amplifier Type, Input Common-Mode Range, Output Swing.

Texas Instruments
Amplifier Type: Single operational amplifier
Input Common-Mode Range: Rail-to-rail
Output Swing: Rail-to-rail
Vergleichen mit TLV2461CP →

TLV2461IP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 8-pin PDIP
Single operational amplifier · 1 circuit · 6 V · 6.4 MHz · Rail-to-rail · Rail-to-rail · 8-PDIP · 8 pins

Preis auf Anfrage

Datenblatt ansehen →

TLV2461AIP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 8-pin PDIP
Same TLV2461 family and 8-pin PDIP footprint; bandwidth grade is 10 MHz versus 6.4 MHz, a 56% increase requiring stability and filter checks

📋 Referenzalternative (nicht im Katalog)

TLV2461CPD

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 8-pin PDIP
Same 6.4 MHz and 6 V headline ratings in the 8-pin PDIP format; ordering-code qualification differs and production suitability must be confirmed

📋 Referenzalternative (nicht im Katalog)

TLV2461CP Grenzwerte & elektrische Eigenschaften

Amplifier Type Single-circuit general-purpose operational amplifier
Number of Channels 1 channel
Supply Voltage Maximum 6 V
Gain-Bandwidth Product 6.4 MHz
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Power Class Low-power operational amplifier
Shutdown Function Available in the TLV246x family
Package Type 8-pin PDIP
Pin-Anzahl 8 pins
Montageart Through-hole
RoHS-Status Compliant

TLV2461CP 8-pin pdip Pinbelegungsleitfaden

Pinbelegung für TLV2461CP (8-pin pdip-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für TLV2461CP im 8-pin pdip-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TLV2461CP.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TLV2461CP ist geeignet für 6 Anwendungs: Portable Sensor Signal Conditioning, Portable Measurement Instrumentation, Audio Signal Conditioning, Communication Interface Conditioning, Active Filter and Equalization, Industrial Control Analog Front End.

🧩

Portable Sensor Signal Conditioning

The TLV2461CP fits low-voltage sensor interfaces because its rail-to-rail inputs can process signals near the supply limits and its 6.4 MHz gain-bandwidth product provides more bandwidth than typical low-frequency general-purpose amplifiers. It can amplify a weak sensor output close to the analog front end before conversion or filtering. The principal checks are sensor source impedance, input bias current, noise behavior, and the input common-mode range at the selected supply voltage.

📱

Portable Measurement Instrumentation

The TLV2461CP is appropriate for compact instrumentation in which a 6 V supply, a single amplifier channel, and a through-hole package simplify construction. Its 6.4 MHz bandwidth supports moderate-frequency measurement and buffer stages, while rail-to-rail input and output operation improves utilization of a low supply voltage. The PDIP format is particularly useful for socketed prototypes, educational equipment, and assemblies that favor easy inspection or manual rework.

🎧

Audio Signal Conditioning

The TLV2461CP can serve as a low-voltage gain or buffer stage in portable audio signal paths. Its 6.4 MHz gain-bandwidth product covers a substantially wider range than audio-band amplifiers and allows the same device to handle moderate ancillary signals in a mixed analog system. Rail-to-rail output capability can improve available swing, although output-current limits, capacitive-load stability, distortion, and noise must be checked before driving a particular audio load.

🌐

Communication Interface Conditioning

The TLV2461CP is suitable for low-voltage communication circuitry when a signal must be buffered or amplified before entering an analog or digital interface. Its 6.4 MHz bandwidth supports moderate data rates, and rail-to-rail operation is helpful in systems whose signal levels occupy much of the available 6 V supply range. PCB placement should minimize trace length around the amplifier, preserve a continuous ground return, and provide local supply bypassing to avoid adding noise to the communication channel.

⚡

Active Filter and Equalization

The TLV2461CP can implement moderate-bandwidth active filters or equalization stages because its 6.4 MHz gain-bandwidth product provides useful closed-loop bandwidth beyond the audio range. The unity-gain bandwidth is a design resource, not a guaranteed usable filter corner frequency; actual response depends on noise gain, phase margin, load, and tolerances. Prototype on a grounded board and verify stability, gain peaking, and output swing across the intended frequency range.

🏭

Industrial Control Analog Front End

The TLV2461CP can condition low-level analog signals in industrial control boards that require a low-voltage, general-purpose amplifier with a leaded package. Its single-channel configuration avoids allocating multiple amplifier sections, while the 6.4 MHz bandwidth supports faster feedback loops than slow precision-only amplifiers. Industrial deployment should confirm the selected temperature grade, noise and offset requirements, isolation boundaries, grounding strategy, and reliability targets for the finished system.

What is the key specification of TLV2461CP?
The TLV2461CP is a single 6 V operational amplifier with a 6.4 MHz gain-bandwidth product and rail-to-rail input/output operation in an 8-pin PDIP package. According to the Texas Instruments TLV2461 product page, the device belongs to the low-power TLV246x family designed for portable applications. These headline specifications make it appropriate for low-voltage signal conditioning where useful input range and output swing are important.
Where can I download the TLV2461CP datasheet PDF?
The TLV2461CP datasheet is available through the Texas Instruments product page at https://www.ti.com/product/TLV2461 and the device details page at https://www.ti.com/product/TLV2461/part-details/TLV2461CP. Use the manufacturer material for the complete electrical characteristic table, ordering information, pin configuration, application guidance, and package drawings. The manufacturer identifies TLV2461CP as an 8-pin PDIP version of the single TLV2461 amplifier.
Where can I find the TLV2461CP pinout?
The TLV2461CP pin configuration is documented in the pinout section of the Texas Instruments TLV2461 datasheet. The part uses an 8-pin PDIP package, so the schematic symbol and PCB footprint must match the manufacturer's numbered package drawing rather than a generic operational-amplifier symbol. Check the notch orientation and pin 1 marking before assembly, especially when substituting the device on a through-hole board.
Is TLV2461CP rail-to-rail?
Yes, the TLV2461CP supports rail-to-rail input and output operation. According to the Texas Instruments TLV2461 family description, the amplifier is designed for low-power rail-to-rail input/output operation in portable systems. Rail-to-rail inputs improve signal access near the supply rails, while rail-to-rail output provides more usable output range than a conventional amplifier constrained to a specified fraction of each rail.
What is the bandwidth of TLV2461CP?
The TLV2461CP has a 6.4 MHz gain-bandwidth product. The Texas Instruments product page lists this value for the single TLV2461 amplifier. Actual closed-loop bandwidth depends on the selected noise-gain configuration and signal gain, so the 6.4 MHz figure should not be treated as the usable bandwidth in every circuit. Use the manufacturer gain-bandwidth and stability information when designing filters or higher-gain stages.
What supply voltage should be used with TLV2461CP?
The TLV2461CP is specified for operation from a maximum supply of 6 V. Texas Instruments describes the TLV2461 as a 6 V, 6.4 MHz, rail-to-rail operational amplifier. The exact allowable supply range, common-mode limits, and output-swing conditions should be selected from the manufacturer electrical characteristics for the intended supply voltage. Do not assume that rail-to-rail operation guarantees full output swing at every load.
Where can I buy TLV2461CP?
Use the Request a Quote form on this XAIPART product page to request TLV2461CP availability, lead time, and order confirmation. The exact TLV2461CP ordering code is identified by Texas Instruments as an 8-pin PDIP device, which helps prevent accidental substitution of an SOIC, SOT-23, or different temperature-grade variant. Current commercial availability and production quantities should be confirmed through the quote process.
What is the price of TLV2461CP?
Current TLV2461CP commercial terms are available through the Request a Quote form on this page. The form confirms quantity, packaging, lead time, and the applicable unit pricing for the exact 8-pin PDIP ordering code. Use the quoted commercial terms for purchasing decisions because catalog prices and market conditions can change without notice. No cached price should be treated as a current quotation.
What is the lead time and stock status for TLV2461CP?
Request current stock, minimum order quantity, and production lead time for TLV2461CP through the Request a Quote form on this page. Texas Instruments identifies TLV2461CP as an ordering option within the TLV2461 family, and distributor catalog listings describe it as an active product. Actual inventory and lead time can vary by order quantity and supply conditions, so production planning should use the returned quotation.
What can replace TLV2461CP?
The closest same-family replacement is a TLV2461 device that preserves the 8-pin PDIP footprint and comparable electrical limits. TLV2461IP is a same-brand candidate in the PDIP family, while TLV2461AIP offers a different bandwidth grade that must be checked against the original circuit. Before replacement, verify pin assignments, supply range, common-mode range, output swing, stability, and shutdown behavior in the manufacturer documentation.
Can TLV2461AIP replace TLV2461CP?
TLV2461AIP can be considered only after confirming that its 8-pin PDIP pinout and application requirements match the original design. Its bandwidth differs from the 6.4 MHz of TLV2461CP, so filters and stability margins must be recalculated even though both devices are members of the low-power rail-to-rail TLV246x family. The TLV2461AIP device is also a different grade, so temperature and qualification requirements should be reviewed.
When should I choose TLV2461CP instead of a slower operational amplifier?
Choose TLV2461CP when a low-voltage signal path needs more than a megahertz-class gain-bandwidth product and rail-to-rail input/output behavior. Its 6.4 MHz specification provides additional bandwidth for modest-gain buffers, sensor interfaces, and active filters. A lower-bandwidth amplifier may be preferable only when lower power, lower noise, or lower cost dominates and the required signal bandwidth remains comfortably below that part's capability.
Is TLV2461CP suitable for portable sensor applications?
Yes, TLV2461CP is suitable for many portable sensor-interface applications because Texas Instruments positions the TLV246x family as low-power, rail-to-rail operational amplifiers for portable equipment. Its rail-to-rail inputs help process signals near the supply limits, and its 6.4 MHz bandwidth supports moderate-frequency sensing paths. Sensor-specific suitability still depends on source impedance, noise, bias current, common-mode limits, and available supply voltage.
TLV2461CP vs TLV2461IP — which operating grade should I use?
TLV2461CP and TLV2461IP are both identified within the Texas Instruments TLV2461 family and preserve the leaded PDIP form used for prototype and industrial assembly. The ordering suffixes indicate different device grades, so the correct choice depends on temperature coverage and qualification requirements rather than bandwidth alone. Review the ordering table and compare the operating-temperature grade before releasing either part into production.
What are the key specifications engineers should know about TLV2461CP?
The principal engineering specifications are one amplifier channel, a 6 V maximum supply rating, 6.4 MHz gain-bandwidth product, rail-to-rail input/output capability, low-power operation, and an 8-pin PDIP package. According to the Texas Instruments TLV2461 product page and the TLV2461 family description, these characteristics position the device for portable instrumentation and general-purpose analog signal conditioning. Offset, bias current, noise, slew rate, and thermal limits should be taken from the full manufacturer datasheet.

Technische Referenzdaten für TLV2461CP – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose TLV2461CP when the design needs a single, low-power operational amplifier with a 6.4 MHz gain-bandwidth product, rail-to-rail input/output behavior, a 6 V maximum supply rating, and an 8-pin PDIP package. It is particularly attractive for through-hole prototypes and industrial assemblies that use leaded components. Select TLV2461IP when the same electrical performance and package are needed but the lower -40°C to +85°C range is sufficient. Consider TLV2461AIP when additional bandwidth margin is useful and its 10 MHz gain-bandwidth characteristic can improve filter or loop-gain implementation; however, stability and phase margin must be reevaluated because it is not electrically identical. Select TLV2461CPD only after confirming that its ordering grade and manufacturing status satisfy the production requirement. In every case, verify the exact pin configuration, input/output limits, noise, offset, bias current, and load capability against the manufacturer datasheet before releasing a drop-in substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt TLV2461IP TLV2461AIP TLV2461CPD
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Amplifier Channels 1 channel 1 channel 1 channel 1 channel
Maximum Supply Voltage 6 V 6 V 6 V 6 V
Gain-Bandwidth Product 6.4 MHz 6.4 MHz 10 MHz 6.4 MHz
Input Common-Mode Range Rail-to-rail input Rail-to-rail input Rail-to-rail input Rail-to-rail input
Output Swing Rail-to-rail output Rail-to-rail output Rail-to-rail output Rail-to-rail output

Wichtigste Unterscheidungsmerkmale

  • Combines 6.4 MHz bandwidth with rail-to-rail input and output operation (vs. TLV2461IP)
  • Supports a wider operating temperature range than the industrial-grade alternative (vs. TLV2461IP)
  • Provides additional closed-loop bandwidth margin over the original device (vs. TLV2461AIP)

Designhinweise

Place the input, output, and supply compensation components close to their associated TLV2461CP pins. Keep the ground return short and use a common ground plane for analog routing where practical. Because this is an 8-pin PDIP device, preserve the manufacturer's hole pattern and orient pin 1 from the package notch. Avoid long exposed input traces next to digital return currents to reduce coupled noise.

Decouple each supply connection with local ceramic capacitance and add bulk capacitance where the power source has appreciable impedance. Keep the operating voltage below the 6 V maximum rating, and verify the derating margin at the highest temperature. Rail-to-rail operation improves signal range, but it does not remove the need to check output swing, load current, and input common-mode limits at the actual supply voltage.

Do not treat the 6.4 MHz gain-bandwidth figure as the final closed-loop bandwidth for every circuit. Noise gain, capacitive loading, operating gain, and loop stability determine the usable response. Before replacing TLV2461CP with TLV2461AIP, recalculate filter poles and check phase margin because the alternative has a different bandwidth grade. Also verify pin functions and the exact PDIP footprint rather than relying only on the generic operational-amplifier symbol.

For small-sensor interfaces, minimize the distance from the sensor to the TLV2461CP input and use guarding or a driven guard where leakage from PCB contamination matters. Bias-current error is governed by sensor source impedance, so verify the complete source impedance rather than only the nominal sensor resistance. Add output isolation or filtering if the next stage presents significant capacitance or a nonlinear load.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

RoHS compliance is associated with the product listing; no separate REACH, halogen-free, conflict-minerals, or automotive qualification statement was established.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

TLV2461CP datasheet TLV2461CP datasheet pdf TLV2461CP pinout TLV2461CP specifications TLV2461CP 6.4MHz TLV2461CP PDIP Texas Instruments TLV2461CP TLV2461CP equivalent TLV2461CP replacement TLV2461CP vs TLV2461IP TLV2461CP price TLV2461CP stock

Verwandte Bauteile & Begriffe

Texas Instruments TLV2461CP TLV2461 TLV2461IP TLV2461AIP TLV2461CPD TLV246x family operational amplifier single amplifier rail-to-rail input rail-to-rail output gain-bandwidth product 6.4 MHz 6 V low-power amplifier portable applications signal conditioning active filter sensor interface PDIP-8 DIP package through-hole mounting RoHS semiconductor
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen