Texas Instruments

TLV2762IP - Dual 1.8V Micropower RRIO Op Amp | Texas Instruments

Teilenummer: TLV2762IP ✓ Aktiv
1.8 V Vdss 20 uA per channel Id 8-pin PDIP Package
MOQ: 1 |

TLV2762IP Übersicht

Texas Instruments TLV2762IP is a dual micropower rail-to-rail input/output operational amplifier with shutdown, optimized for low-voltage, low-power signal-conditioning systems. The device operates from a 1.8 V minimum supply and uses only 20 uA per channel in the stated low-power operating condition, with shutdown current listed as 10 nA per channel. Its rail-to-rail input and output behavior supports operation across the available supply range, while a 500 kHz gain-bandwidth product provides useful bandwidth for general-purpose signal processing. The TLV2762IP is packaged in an 8-pin PDIP package.

The TLV2762 belongs to the operational-amplifier hierarchy, where an operational amplifier is a voltage-feedback analog IC used to amplify, buffer, filter, or condition low-level signals. A rail-to-rail input/output amplifier is designed to accept and produce signals close to the positive and negative supply rails, making it useful in battery-powered sensors, portable instrumentation, and low-voltage industrial control systems. The micropower operating current helps reduce the energy required by continuously powered measurement equipment.

The principal electrical characteristics include 1.8 V operation, a maximum recommended supply voltage of 3.6 V, 500 kHz bandwidth, 20 uA per channel supply current, and 10 nA per channel shutdown current. The TLV2762 family is identified as providing rail-to-rail input/output operation and CMOS-compatible shutdown behavior. These characteristics make the part suitable for portable sensor interfaces, low-energy monitoring modules, battery-powered test equipment, and embedded analog signal-conditioning circuits.

The device is intended for single-supply operation, with the signal path operating from one supply rail and ground. Design should include input and output capacitance appropriate to the application, stable feedback-network design, and careful routing to minimize parasitic effects. The TLV2762IP package is an 8-pin PDIP, which supports through-hole prototyping and insertion into conventional DIP footprints.

This page combines manufacturer-family electrical characteristics, package information, sourcing guidance, and application-oriented design notes to support component selection and PCB implementation.

Drop-in-Alternativen für TLV2762IP – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

TLV2762IP Grenzwerte & elektrische Eigenschaften

Product Type Dual operational amplifier
Number of Channels 2 channels
Minimum Supply Voltage 1.8 V
Maximum Recommended Supply Voltage 3.6 V
Versorgungsstrom 20 uA per channel
Shutdown Supply Current 10 nA per channel
Gain-Bandwidth Product 500 kHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Supply Type Single supply
Shutdown Function Yes
Betriebstemperaturbereich Industrial temperature range
Gehäuse 8-pin PDIP
Package Type Through-hole PDIP
Montageart Through-hole

TLV2762IP Pin-Konfiguration

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 1OUT — Output of amplifier 1
Pin 2 1IN- — Inverting input of amplifier 1
Pin 3 1IN+ — Non-inverting input of amplifier 1
Pin 4 V+ — Positive supply
Pin 5 2IN+ — Non-inverting input of amplifier 2
Pin 6 2IN- — Inverting input of amplifier 2
Pin 7 2OUT — Output of amplifier 2
Pin 8 SHDN — Shutdown input

Typische Anwendungen

TLV2762IP ist geeignet für 6 Anwendungs: Battery-Powered Sensor Interface, Portable Medical Monitoring, Low-Voltage Data Acquisition, Industrial Signal Conditioning, Portable Instrumentation, Battery-Powered IoT Node.

🧩

Battery-Powered Sensor Interface

The TLV2762IP fits low-energy sensor front ends because it operates from a 1.8 V minimum supply and consumes 20 uA per channel. Its rail-to-rail input and output characteristics help preserve small sensor signals when the available signal range is close to the supply limits. The dual configuration can amplify a sensor signal and buffer the result for an ADC or comparator. Design should confirm the required input range, output loading, and ADC acquisition behavior, while the shutdown pin can reduce current when the measurement sequence is inactive.

💊

Portable Medical Monitoring

The TLV2762IP is suitable for compact monitoring equipment where supply capacity and amplifier power are constrained. Its 1.8 V minimum supply supports low-voltage systems, and the 20 uA per-channel current is appropriate for continuously powered signal paths. The rail-to-rail input stage can accommodate sensor outputs near the supply range, while the dual amplifier can handle gain and buffering functions. For medical designs, verify the complete signal chain, isolation requirements, electrical limits, and application-specific qualification requirements.

🖥️

Low-Voltage Data Acquisition

The TLV2762IP can provide the first amplification and buffering stage in a compact single-supply data-acquisition circuit. With a 500 kHz gain-bandwidth product, it is appropriate for slow sensor signals and general-purpose instrumentation where excessive bandwidth is unnecessary. Rail-to-rail output behavior helps drive a moderate ADC input, although the designer must check settling, output drive, noise, and the ADC's input range. Place bypass capacitors near the supply pins and route the high-impedance input node with short, guarded traces.

🏭

Industrial Signal Conditioning

The TLV2762IP is usable in low-voltage industrial measurement modules that require two low-power analog channels in one package. Its rail-to-rail input/output operation helps accommodate process-control signals within a restricted supply range, and the 500 kHz bandwidth supports many sensor and control signals. The 8-pin PDIP package is particularly convenient for through-hole prototypes and industrial control boards assembled with conventional DIP sockets. Production designs should verify industrial temperature operation, noise performance, and long-term availability.

🔧

Portable Instrumentation

The TLV2762IP suits handheld meters and portable test instruments because it combines two amplifier channels with low supply current and a low minimum operating voltage. The device can amplify thermocouple, resistive-sensor, or other low-level analog signals when the circuit is designed for single-supply operation. Rail-to-rail behavior reduces signal-range restrictions, while the 500 kHz bandwidth is generally more than adequate for many slow measurement functions. Confirm sensor excitation requirements, common-mode voltage, calibration accuracy, and display or ADC interface limits.

🧩

Battery-Powered IoT Node

The TLV2762IP can condition a sensor or status signal in a battery-powered IoT node that operates from a low-energy supply. Its 20 uA per-channel operating current helps limit continuous consumption, and the shutdown feature provides a way to reduce bias when the node is between measurement intervals. The rail-to-rail input/output characteristics help maintain usable signal swing in compact systems. The circuit should include local decoupling, defined shutdown states, and protection appropriate to the sensor wiring and operating environment.

What is the TLV2762IP?
The TLV2762IP is a dual micropower operational amplifier with rail-to-rail input and output stages, shutdown support, and an 8-pin PDIP package. According to the Texas Instruments TLV2762 family description, it is optimized for low-voltage, low-power signal conditioning and operates from a 1.8 V minimum supply. The two amplifiers can be used for independent gain stages, buffers, filters, or sensor-interface circuits.
What is the operating voltage of the TLV2762IP?
The TLV2762IP operates from a 1.8 V minimum supply, with a maximum recommended supply voltage of 3.6 V according to the Texas Instruments TLV276x family datasheet. This range is intended for low-voltage systems, including battery-powered equipment and portable instrumentation. The exact supply headroom required by a particular application should still be checked against the circuit's signal levels and output requirements.
How much current does the TLV2762IP consume?
The TLV2762IP uses 20 uA per channel in the low-power operating condition described by Texas Instruments. Its shutdown current is 10 nA per channel. These figures distinguish the part from higher-current rail-to-rail amplifiers and make it suitable for portable and always-on systems where amplifier bias current can dominate battery life.
Is the TLV2762IP rail-to-rail?
Yes. The Texas Instruments TLV2762 family is described as a 1.8 V micropower rail-to-rail input/output operational amplifier family. Rail-to-rail input operation allows the input signal to approach the supply limits, while rail-to-rail output operation is useful when the circuit needs to maximize usable output voltage. Designers should still account for the exact output swing and load conditions in the final circuit.
What is the bandwidth of the TLV2762IP?
The TLV2762IP has a 500 kHz gain-bandwidth product. According to the manufacturer family description, the TLV276x devices provide this bandwidth while drawing approximately 20 uA per channel. The bandwidth is suitable for many low-power signal-conditioning tasks, but higher-frequency or precision applications require checking gain, slew rate, noise, and stability requirements.
Where can I download the TLV2762IP datasheet?
The manufacturer datasheet is available through the Texas Instruments TLV276x PDF link on this page, and the TLV2762 product page provides the primary device documentation. The TLV2762IP is the 8-pin PDIP version of the TLV2762 family. Use the pin-description table and electrical-characteristics tables in the manufacturer datasheet when assigning connections and verifying limits.
Where can I find the TLV2762IP pinout?
The TLV2762IP pinout is defined by the Texas Instruments TLV2762 family datasheet and its 8-pin PDIP package diagram. The package contains two amplifier channels plus power, ground, and shutdown-related connections. Use the manufacturer pin-description table when assigning PCB tracks, especially because the shutdown function must be connected according to the application requirements.
Can the TLV2762IP be used with a single supply?
Yes. The TLV2762IP is specified as a single-supply operational amplifier, with a 1.8 V minimum supply and a 3.6 V maximum recommended supply. In a single-supply circuit, the signal is normally referenced to ground and the amplifier operates from the positive rail. The supply voltage and input/output signal range must be selected together so that the required signal excursion remains inside the usable range.
What is the best drop-in replacement for the TLV2762IP?
The TLV2762IP is an 8-pin PDIP dual amplifier, so a true drop-in replacement must match the package footprint, pin arrangement, shutdown function, supply range, and electrical characteristics. The available cross-reference information identifies the TLV2762 family but does not establish a separately verified 8-pin PDIP replacement with the same pinout. Request a quote for the exact MPN or consult the Texas Instruments cross-reference search before changing the PCB.
Can TLV2762IP replace another dual operational amplifier?
A direct replacement can be considered only after checking package, pinout, supply voltage, input/output range, bandwidth, shutdown behavior, and quiescent current. The TLV2762IP is a dual 1.8 V micropower rail-to-rail amplifier in an 8-pin PDIP package. A device with the same function but a different package requires PCB changes and is not a drop-in replacement.
Is the TLV2762IP suitable for battery-powered sensors?
Yes, the TLV2762IP is suitable for battery-powered sensor signal conditioning when low quiescent current is important. Its 20 uA per-channel operating current and 10 nA per-channel shutdown current can reduce continuous power demand, while the 1.8 V minimum supply supports low-energy systems. Sensor excitation, ADC input range, noise, and the required signal bandwidth should also be evaluated.
When should I choose the TLV2762IP over a higher-current op amp?
Choose the TLV2762IP when the design needs a dual amplifier operating from a low-voltage supply with low quiescent current and rail-to-rail signal handling. A higher-current op amp may be preferable when driving heavier loads, requiring wider bandwidth, or operating from a higher supply voltage. The selection should be based on the actual load, signal amplitude, bandwidth, noise, and power budget rather than on supply current alone.
How do I design the TLV2762IP power and shutdown connections?
Connect the supply pins to the intended single supply and ground pins to the circuit ground, then connect the shutdown pin according to the manufacturer's pin-description table. Keep the supply traces short and place the required bypass capacitors close to the device. If shutdown is used, define its logic level during startup and ensure that the pin is never left floating.
What is TLV2762IP vs TLV2762IP replacement?
The TLV2762IP is the specific 8-pin PDIP ordering code for the Texas Instruments TLV2762 family. A valid replacement must have the same 8-pin PDIP footprint and compatible pin functions, including the shutdown connection. The available family information does not identify a separately verified drop-in replacement, so use the manufacturer cross-reference search and compare the full datasheet before approving a substitution.
What are the key specifications of TLV2762IP that engineers should know?
The TLV2762IP is a dual 1.8 V micropower rail-to-rail input/output operational amplifier with a 500 kHz gain-bandwidth product, 20 uA per-channel operating current, 10 nA per-channel shutdown current, and an 8-pin PDIP package. The Texas Instruments family description also identifies a 3.6 V maximum recommended supply voltage and single-supply operation.

Technische Referenzdaten für TLV2762IP – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the TLV2762IP for low-voltage, low-power analog designs that need two rail-to-rail amplifier channels, single-supply operation, and shutdown control. Its 1.8 V minimum supply, 20 uA per-channel operating current, and 500 kHz bandwidth make it appropriate for portable sensors, compact instrumentation, and battery-powered data-acquisition nodes. Select a higher-current amplifier when the circuit must drive heavier loads, operate at higher supply voltages, or provide substantially greater bandwidth. The 8-pin PDIP package is advantageous for through-hole prototypes and boards using DIP sockets, but a surface-mount version may be preferable for compact production designs. Before approving any substitute, verify package dimensions, pin assignments, shutdown logic, supply limits, quiescent current, bandwidth, and rail-to-rail performance.

Vergleich mit Alternativen

Parameter Dieses Produkt
Package 8-pin PDIP
Brand Texas Instruments
Product Type Dual operational amplifier
Number of Channels 2 channels
Minimum Supply Voltage 1.8 V
Maximum Recommended Supply Voltage 3.6 V
Supply Current 20 uA per channel
Shutdown Supply Current 10 nA per channel
Gain-Bandwidth Product 500 kHz
Input and Output Operation Rail-to-rail

Wichtigste Unterscheidungsmerkmale

  • Low-voltage micropower operation (vs. Higher-current rail-to-rail operational amplifiers)
  • Integrated shutdown function (vs. Operational amplifiers without shutdown control)
  • Dual rail-to-rail channel configuration (vs. Single-channel low-power amplifiers)

Designhinweise

Use the manufacturer-recommended bypass capacitors close to the positive supply and ground pins. The TLV2762IP is designed for low-voltage micropower operation, with 20 uA per channel in the normal low-power condition and 10 nA per channel in shutdown. Keep the shutdown node from floating, define its state during power-up, and account for the supply current of both amplifier channels in the battery budget.

Place the device so that the short feedback components connect directly to the relevant input and output pins. Route high-impedance input traces away from supply, shutdown, and digital timing nodes, and keep the ground return path continuous. For sensor interfaces, use a protective or guarded input layout when the source impedance is high and the available supply range is only 1.8 V to 3.6 V.

Do not treat rail-to-rail input and output as unlimited signal range; verify the usable swing under the actual load and supply condition. Also avoid assuming that the 500 kHz gain-bandwidth product is sufficient for high-gain or high-slew-rate applications. Use the manufacturer datasheet pin-description table for the shutdown connection and confirm the operating temperature and supply limits for the assembled system.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The TLV2762 family is described as operating over the industrial temperature range. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements are not established in the available manufacturer-family information.

Ähnliche Suchanfragen

TLV2762IP datasheet TLV2762IP pinout TLV2762IP specifications TLV2762IP equivalent TLV2762IP replacement TLV2762IP price TLV2762IP stock Texas Instruments TLV2762IP TLV2762IP 1.8V dual op amp TLV2762IP 8-pin PDIP TLV2762IP low power amplifier TLV2762IP vs TLV2764

Verwandte Bauteile & Begriffe

Texas Instruments TLV2762IP TLV2762 TLV2764 TLV2765 TLV276x Operational amplifier Dual amplifier Micropower amplifier Rail-to-rail input Rail-to-rail output Single-supply amplifier Voltage-feedback amplifier Analog signal conditioning Low-dropout power management Semiconductor 8-pin PDIP Through-hole package Surface-mount package Battery-powered sensor Portable instrumentation Data acquisition Industrial control Shutdown function 500 kHz gain-bandwidth product
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen