TLV2762IP - Dual 1.8V Micropower RRIO Op Amp | Texas Instruments
MPN: TLV2762IP ✓ AktifTLV2762IP Ringkasan
The TLV2762 belongs to the operational-amplifier hierarchy, where an operational amplifier is a voltage-feedback analog IC used to amplify, buffer, filter, or condition low-level signals. A rail-to-rail input/output amplifier is designed to accept and produce signals close to the positive and negative supply rails, making it useful in battery-powered sensors, portable instrumentation, and low-voltage industrial control systems. The micropower operating current helps reduce the energy required by continuously powered measurement equipment.
The principal electrical characteristics include 1.8 V operation, a maximum recommended supply voltage of 3.6 V, 500 kHz bandwidth, 20 uA per channel supply current, and 10 nA per channel shutdown current. The TLV2762 family is identified as providing rail-to-rail input/output operation and CMOS-compatible shutdown behavior. These characteristics make the part suitable for portable sensor interfaces, low-energy monitoring modules, battery-powered test equipment, and embedded analog signal-conditioning circuits.
The device is intended for single-supply operation, with the signal path operating from one supply rail and ground. Design should include input and output capacitance appropriate to the application, stable feedback-network design, and careful routing to minimize parasitic effects. The TLV2762IP package is an 8-pin PDIP, which supports through-hole prototyping and insertion into conventional DIP footprints.
This page combines manufacturer-family electrical characteristics, package information, sourcing guidance, and application-oriented design notes to support component selection and PCB implementation.
Pilihan pengganti yang segera untuk TLV2762IP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifTLV2762IP Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Dual operational amplifier |
| Number of Channels | 2 channels |
| Minimum Supply Voltage | 1.8 V |
| Maximum Recommended Supply Voltage | 3.6 V |
| Arus Pemberi Arus | 20 uA per channel |
| Shutdown Supply Current | 10 nA per channel |
| Gain-Bandwidth Product | 500 kHz |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Supply Type | Single supply |
| Shutdown Function | Yes |
| Gambaran Suhu Operasi | Industrial temperature range |
| Kemasan | 8-pin PDIP |
| Package Type | Through-hole PDIP |
| Jenis Pemasangan | Through-hole |
Konfigurasi Pin TLV2762IP
| Pin 1 | 1OUT — Output of amplifier 1 |
| Pin 2 | 1IN- — Inverting input of amplifier 1 |
| Pin 3 | 1IN+ — Non-inverting input of amplifier 1 |
| Pin 4 | V+ — Positive supply |
| Pin 5 | 2IN+ — Non-inverting input of amplifier 2 |
| Pin 6 | 2IN- — Inverting input of amplifier 2 |
| Pin 7 | 2OUT — Output of amplifier 2 |
| Pin 8 | SHDN — Shutdown input |
Aplikasi Biasa
TLV2762IP patut untuk 6 aplikasis: Battery-Powered Sensor Interface, Portable Medical Monitoring, Low-Voltage Data Acquisition, Industrial Signal Conditioning, Portable Instrumentation, Battery-Powered IoT Node.
Battery-Powered Sensor Interface
The TLV2762IP fits low-energy sensor front ends because it operates from a 1.8 V minimum supply and consumes 20 uA per channel. Its rail-to-rail input and output characteristics help preserve small sensor signals when the available signal range is close to the supply limits. The dual configuration can amplify a sensor signal and buffer the result for an ADC or comparator. Design should confirm the required input range, output loading, and ADC acquisition behavior, while the shutdown pin can reduce current when the measurement sequence is inactive.
Portable Medical Monitoring
The TLV2762IP is suitable for compact monitoring equipment where supply capacity and amplifier power are constrained. Its 1.8 V minimum supply supports low-voltage systems, and the 20 uA per-channel current is appropriate for continuously powered signal paths. The rail-to-rail input stage can accommodate sensor outputs near the supply range, while the dual amplifier can handle gain and buffering functions. For medical designs, verify the complete signal chain, isolation requirements, electrical limits, and application-specific qualification requirements.
Low-Voltage Data Acquisition
The TLV2762IP can provide the first amplification and buffering stage in a compact single-supply data-acquisition circuit. With a 500 kHz gain-bandwidth product, it is appropriate for slow sensor signals and general-purpose instrumentation where excessive bandwidth is unnecessary. Rail-to-rail output behavior helps drive a moderate ADC input, although the designer must check settling, output drive, noise, and the ADC's input range. Place bypass capacitors near the supply pins and route the high-impedance input node with short, guarded traces.
Industrial Signal Conditioning
The TLV2762IP is usable in low-voltage industrial measurement modules that require two low-power analog channels in one package. Its rail-to-rail input/output operation helps accommodate process-control signals within a restricted supply range, and the 500 kHz bandwidth supports many sensor and control signals. The 8-pin PDIP package is particularly convenient for through-hole prototypes and industrial control boards assembled with conventional DIP sockets. Production designs should verify industrial temperature operation, noise performance, and long-term availability.
Portable Instrumentation
The TLV2762IP suits handheld meters and portable test instruments because it combines two amplifier channels with low supply current and a low minimum operating voltage. The device can amplify thermocouple, resistive-sensor, or other low-level analog signals when the circuit is designed for single-supply operation. Rail-to-rail behavior reduces signal-range restrictions, while the 500 kHz bandwidth is generally more than adequate for many slow measurement functions. Confirm sensor excitation requirements, common-mode voltage, calibration accuracy, and display or ADC interface limits.
Battery-Powered IoT Node
The TLV2762IP can condition a sensor or status signal in a battery-powered IoT node that operates from a low-energy supply. Its 20 uA per-channel operating current helps limit continuous consumption, and the shutdown feature provides a way to reduce bias when the node is between measurement intervals. The rail-to-rail input/output characteristics help maintain usable signal swing in compact systems. The circuit should include local decoupling, defined shutdown states, and protection appropriate to the sensor wiring and operating environment.
Data referensi kejuruteraan untuk TLV2762IP — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Package | 8-pin PDIP |
| Brand | Texas Instruments |
| Product Type | Dual operational amplifier |
| Number of Channels | 2 channels |
| Minimum Supply Voltage | 1.8 V |
| Maximum Recommended Supply Voltage | 3.6 V |
| Supply Current | 20 uA per channel |
| Shutdown Supply Current | 10 nA per channel |
| Gain-Bandwidth Product | 500 kHz |
| Input and Output Operation | Rail-to-rail |
Penyeberangsung Jelas
- Low-voltage micropower operation (vsHigher-current rail-to-rail operational amplifiers)
- Integrated shutdown function (vsOperational amplifiers without shutdown control)
- Dual rail-to-rail channel configuration (vsSingle-channel low-power amplifiers)
Catatan Desain
Use the manufacturer-recommended bypass capacitors close to the positive supply and ground pins. The TLV2762IP is designed for low-voltage micropower operation, with 20 uA per channel in the normal low-power condition and 10 nA per channel in shutdown. Keep the shutdown node from floating, define its state during power-up, and account for the supply current of both amplifier channels in the battery budget.
Place the device so that the short feedback components connect directly to the relevant input and output pins. Route high-impedance input traces away from supply, shutdown, and digital timing nodes, and keep the ground return path continuous. For sensor interfaces, use a protective or guarded input layout when the source impedance is high and the available supply range is only 1.8 V to 3.6 V.
Do not treat rail-to-rail input and output as unlimited signal range; verify the usable swing under the actual load and supply condition. Also avoid assuming that the 500 kHz gain-bandwidth product is sufficient for high-gain or high-slew-rate applications. Use the manufacturer datasheet pin-description table for the shutdown connection and confirm the operating temperature and supply limits for the assembled system.
Maklumat Kesediaan
The TLV2762 family is described as operating over the industrial temperature range. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements are not established in the available manufacturer-family information.