TOBY-R200-82B - LTE Cat 1/HSPA/GSM Multi-Mode Cellular Module | u-blox
Teilenummer: TOBY-R200-82B ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $89.5 | $89,50 |
| 10 | $82.4 | $824,00 |
| 100 | $73.1 | $7.310,00 |
| 500 | $65.8 | $32.900,00 |
| 1.000 | $58.9 | $58.900,00 |
TOBY-R200-82B Übersicht
A cellular IoT module is an integrated radio subsystem that bundles the baseband processor, RF transceiver, power management, and SIM interface into a single pre-certified module, replacing what would otherwise be a complex discrete radio design. In the broader system hierarchy, cellular modules sit between the application MCU (running the application stack) and the cellular network infrastructure, abstracting radio certification (PTCRB, GCF, FCC, carrier) into a drop-in component. The TOBY-R2 series occupies the LTE Cat 1 tier, which provides a balanced compromise between Cat-M1/NB-IoT (lower power, lower throughput) and Cat 4 (higher throughput, higher cost), making it ideal for telematics, asset tracking, and connected industrial devices.
Key features include a wide 3.3 V to 4.4 V supply range, output power up to 33 dBm (2 W) at GSM, UART and USB interfaces for host connectivity, and an integrated SIM interface. The castellation LGA package enables SMT reflow soldering directly onto the customer PCB, eliminating the need for a separate module socket. The module is qualified for industrial-grade operation, supporting extended temperature ranges suitable for outdoor telematics and vehicle applications.
Typical applications include fleet management and vehicle telematics, asset tracking and logistics, point-of-sale (POS) terminals, remote monitoring and SCADA systems, smart metering, and connected healthcare devices. The US-carrier band configuration (-82B variant) makes it particularly suitable for North American deployments on Verizon, AT&T, T-Mobile, and US-Cellular LTE networks.
When designing with the TOBY-R200-82B, ensure the PCB layout uses a 50-ohm controlled-impedance RF trace from the module antenna pad to the antenna connector or chip antenna. Provide adequate decoupling on the VBATT rail and follow u-blox's reference design for ground stitching around the LGA land pattern to prevent radiated emissions issues during PTCRB/GCF certification.
The TOBY-R200-82B is part of the broader TOBY-R2 family that includes variants for different regional band plans and 3G/2G fallback combinations, allowing designers to scale across geographies with a common hardware footprint.
Drop-in-Alternativen für TOBY-R200-82B – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
TOBY-R200-02B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TOBY-R200-42B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TOBY-R202-02B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TOBY-R200-82B Spezifikationen (herstellerveröffentlicht)
| Manufacturer | u-blox |
| Series | TOBY-R2 |
| Module Type | Transceiver Module - Cellular |
| Cellular Technology | GSM, LTE, UMTS (HSPA) |
| LTE Category | Category 1 (Cat 1) |
| LTE FDD Bands | Bands 1, 2, 4, 5, 8, 12 |
| 3G (UMTS/HSPA) Bands | Bands 1, 2, 5, 8 |
| 2G (GSM) Bands | 850 / 900 / 1800 / 1900 MHz (Quad-band) |
| Downlink Data Rate | 10.3 Mbps |
| Uplink Data Rate | 5 Mbps |
| RF Output Power | Up to 33 dBm (2 W) at GSM |
| Versorgungsspannung | 3.3 V to 4.4 V |
| Antenna Interface | Castellation pad (antenna not included) |
| Gehäuse | LGA (castellation), 25 x 36 mm |
| Montageart | Surface Mount (SMT reflow) |
| Reel Quantity | 150 pcs per reel |
| Carrier Certification | US-Cellular, T-Mobile (and other US carriers) |
| Compliance | PTCRB, GCF, FCC (carrier-specific) |
TOBY-R200-82B Schnittstellen & Anschlüsse
TOBY-R200-82B bietet die folgenden, vom Hersteller veröffentlichten Schnittstellen und Anschlüsse: Leistungsaufnahme. Pinbelegung der Erweiterungsheader, Nummerierung der Anschlüsse und elektrische Grenzwerte sind in der Herstellerdokumentation definiert.
| Leistungsaufnahme | 3.3 V to 4.4 V |
Siehe die Herstellerdokumentation für die vollständige Pinbelegung der Erweiterungsleiste und die Nummerierung der Steckverbinder-Pins.
Leistungs- und thermische Eigenschaften
| Leistungsaufnahme | 3.3 V to 4.4 V |
Vom Hersteller veröffentlichte Leistungs- und thermische Parameter für TOBY-R200-82B.
Typische Anwendungen
TOBY-R200-82B ist geeignet für 6 Anwendungs: Fleet Management & Vehicle Telematics, Asset Tracking & Logistics, Point-of-Sale (POS) Terminals, Remote Monitoring & SCADA Systems, Smart Metering (Electric/Gas/Water), Connected Healthcare Devices.
Fleet Management & Vehicle Telematics
The TOBY-R200-82B is ideally suited for vehicle telematics and fleet management systems deployed across the United States, where it provides broadband LTE Cat 1 connectivity with automatic fallback to 3G HSPA and 2G GSM when LTE coverage is unavailable. Its 10.3 Mbps downlink supports real-time GPS map tile rendering, route optimization, and firmware-over-the-air (FOTA) updates that exceed the throughput limits of Cat-M1 modules (~300 kbps). The module's high 33 dBm GSM output power maintains connectivity in rural coverage gaps, while the castellation LGA footprint withstands automotive vibration when properly soldered. Per the u-blox TOBY-R2 system integration manual, integration with OBD-II dongles, asset trackers, and dashcam systems is well documented, and the pre-certified PTCRB/GCF/FCC status eliminates the lengthy and costly carrier certification step for OEMs.
Empfohlen
Asset Tracking & Logistics
For asset-tracking applications in logistics and supply-chain visibility, the TOBY-R200-82B delivers the multi-mode cellular bandwidth needed to transmit periodic sensor telemetry plus occasional image snapshots or barcode scan data. Its Cat 1 throughput (10.3 Mbps down, 5 Mbps up) easily exceeds the requirements of GPS pingers and environmental sensor loggers while remaining more power-efficient than Cat 4 modules. The quad-band GSM fallback extends tracking continuity to areas where LTE coverage has not yet been deployed, which is critical for intermodal shipping containers traversing older 2G coverage zones. Per the u-blox TOBY-R2 platform documentation, the module's integrated IP stack and u-blox proprietary AT-command extensions accelerate integration with low-power MCU hosts in battery-powered trackers.
Empfohlen
Point-of-Sale (POS) Terminals
The TOBY-R200-82B fits wireless POS terminals that require reliable broadband cellular connectivity for payment authorization, receipt printing, and inventory synchronization. Its 10 Mbps downlink accelerates transaction timeouts over legacy 2G POS modems, while the US-carrier band profile (-82B variant) ensures connectivity across Verizon, AT&T, T-Mobile, and US-Cellular LTE networks used by US retailers. The castellation LGA package allows direct SMT reflow onto compact terminal motherboards without a separate module socket, reducing BOM cost and assembly height. Per the everything RF listing, the 3.3 V to 4.4 V input range simplifies power design for battery-backed terminals that must operate during grid outages.
Empfohlen
Remote Monitoring & SCADA Systems
For SCADA and remote monitoring systems deployed in industrial environments - including oil and gas wellheads, water treatment plants, and electrical substations - the TOBY-R200-82B provides always-on broadband cellular connectivity with multi-mode fallback for sites outside LTE coverage. Its industrial temperature qualification and rugged LGA package handle the thermal and mechanical demands of outdoor enclosures. The module's 33 dBm output power maintains connectivity in electrically noisy industrial environments where signal propagation is degraded by metal structures. Per the u-blox TOBY-R2 family datasheet, the integrated TCP/IP stack and SSL/TLS support enable secure Modbus-TCP and DNP3 telemetry without requiring an external security MCU.
Empfohlen
Smart Metering (Electric/Gas/Water)
The TOBY-R200-82B enables AMI (Advanced Metering Infrastructure) smart meters that transmit interval consumption data, outage notifications, and tamper alerts to utility back-office systems. Its broadband Cat 1 capability supports larger payloads than Cat-M1 or NB-IoT modules, accommodating firmware updates and detailed load-profile data from advanced metering endpoints. The 2G GSM fallback ensures connectivity for legacy AMI deployments in areas where LTE has been deferred. Per the u-blox TOBY-R2 product summary, the module's pre-certified regulatory status (PTCRB/GCF/FCC) allows meter manufacturers to launch US AMI products without per-carrier certification cycles.
Empfohlen
Connected Healthcare Devices
For connected healthcare applications such as remote patient monitoring, medication adherence systems, and telehealth kiosks, the TOBY-R200-82B provides broadband cellular connectivity with the multi-mode fallback required for residential broadband-replacement use cases. Its 10 Mbps downlink supports video-based telehealth consultations and rapid transfer of patient telemetry data, while the castellation LGA package fits inside compact handheld device enclosures. Per the u-blox TOBY-R2 product family, the module's integrated SSL/TLS and HTTPS support meets HIPAA-grade data-in-transit encryption requirements without external crypto accelerator overhead.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für TOBY-R200-82B – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | TOBY-R200-02B | TOBY-R200-42B | TOBY-R202-02B |
|---|---|---|---|---|
| Brand | u-blox | u-blox | u-blox | u-blox |
| Package | LGA 25x36 mm castellation | LGA 25x36 mm castellation - same | LGA 25x36 mm castellation - same | LGA 25x36 mm castellation - same |
| Cellular Technology | LTE Cat 1 / HSPA / GSM | LTE Cat 1 / HSPA / GSM | LTE Cat 1 / HSPA / GSM | LTE Cat 1 / HSPA / GSM |
| Regional Band Plan | US-carrier (-82B) | Different regional band plan | Different regional band plan | Different regional band plan |
| Downlink Data Rate | 10.3 Mbps | 10.3 Mbps | 10.3 Mbps | 10.3 Mbps |
| Supply Voltage | 3.3 V to 4.4 V | 3.3 V to 4.4 V | 3.3 V to 4.4 V | 3.3 V to 4.4 V |
| Carrier Certification | US-Cellular, T-Mobile (US) | Different regional carrier profiles | Different regional carrier profiles | Different regional carrier profiles |
| Reel Quantity | 150 pcs/reel | 150 pcs/reel | 150 pcs/reel | 150 pcs/reel |
Wichtigste Unterscheidungsmerkmale
- US-carrier firmware preloaded (vs. TOBY-R200-02B)
- Highest 33 dBm output power in family (vs. TOBY-R202-02B)
- Castellation LGA footprint enables SMT reflow (vs. TOBY-R200-42B)
Designhinweise
The TOBY-R200-82B RF antenna pad requires a 50-ohm controlled-impedance trace (typically microstrip or coplanar waveguide with ground) routed to the antenna connector or chip antenna. Per the u-blox TOBY-R2 system integration manual, the ground plane must extend beneath the entire RF trace, and stitching vias must surround the castellation edges to suppress radiated emissions during PTCRB/GCF certification. Trace length should be minimized; long meanders introduce loss and detune the matching network.
Place a 10 uF ceramic + 100 nF ceramic decoupling pair as close as physically possible to the module's VBATT pad. The wide 3.3 V to 4.4 V input range accommodates Li-ion batteries and 5 V rails stepped down via an LDO. Per u-blox recommendations, avoid placing the LDO more than 25 mm from the module to prevent voltage droop during GSM burst transmission (peak current can exceed 2 A momentarily at 33 dBm output).
During sustained LTE or 2G transmission at maximum output power, the module dissipates several watts. Provide a continuous copper ground plane beneath the LGA footprint and thermal vias stitched through the castellation pads to conduct heat to inner PCB layers. In enclosed housings without airflow, derate output power or reduce duty cycle to prevent thermal shutdown; consult the system integration manual's thermal-management section for the derating curve.
Do not power the module from a noisy switching converter without an LDO post-regulation - the module's internal PMIC is sensitive to supply ripple above 100 mVpp. Do not omit the SIM card ESD protection diode array near the SIM connector; bare SIM lines are vulnerable to ESD during handling. Finally, do not deploy the -82B variant outside the US without re-flashing firmware for the target region's band plan - hardware is the same but radio compliance fails without the correct regional firmware image.
Compliance-Informationen
RoHS and REACH compliant per u-blox product declarations. PTCRB/GCF/FCC radio certifications apply to the module radio, not the customer's end product. AEC-Q100 not applicable - module is not a discrete automotive semiconductor.
