Texas Instruments

TPA3220DDW - 60W Stereo Class-D Amplifier | Texas Instruments

Teilenummer: TPA3220DDW ✓ Aktiv
7 V to 32 V Vdss 70 mΩ Rds(on) 44-pin HTSSOP (DDW) with exposed pad Package
MOQ: 1 |

TPA3220DDW Übersicht

The Texas Instruments TPA3220DDW is an analog-input Class-D audio amplifier rated for 60 W stereo output and 110 W mono output, operating from 7 V to 32 V in a 44-pin HTSSOP (DDW) package with exposed pad. It accepts single-ended or differential analog inputs up to 2 V RMS, with selectable gains of 18 dB, 24 dB, 30 dB, and 34 dB.

A Class-D amplifier is a switching audio-output stage whose efficiency is substantially higher than that of a conventional linear amplifier at comparable output power. Its hierarchy extends from audio amplifiers to power-management semiconductors. The TPA3220 family combines analog input conditioning, a feedback-controlled Class-D output stage, thermal protection, and efficient power conversion in one device, reducing the number of external components required for a compact audio output channel.

Key features include greater than 90% efficiency, idle power below 0.25 W, standby power below 0.1 W, and a closed-loop feedback bandwidth extending to 100 kHz. Its optimized gate-drive design and 70 mΩ MOSFET output devices support efficient full-power operation. Four input-gain settings allow the same amplifier to accommodate different source levels without redesigning the analog front end.

The TPA3220 supports both analog-differential (AD) modulation and low-idle-current HEAD modulation. AD operation provides conventional differential behavior, while HEAD modulation targets lower idle consumption when the amplifier is not delivering substantial audio power. The 100 kHz feedback bandwidth helps reduce distortion within the audio band, while the analog input interface supports both single-ended and differential signal sources.

Typical applications include stereo speaker systems, mono subwoofer amplifiers, powered multimedia speakers, soundbars, home-audio receivers, television audio platforms, and compact consumer-audio products. The 7 V to 32 V supply range accommodates automotive and portable-system rails after the appropriate input filtering, protection, and power-conversion stages have been designed.

For implementation, place the exposed-pad thermal interface and input/output capacitors according to the manufacturer layout guidance. Confirm the speaker load, thermal performance, analog gain, and filter selection before production. The manufacturer datasheet should be used to verify pin assignments, absolute maximum ratings, and exposed-pad land geometry.

Drop-in-Alternativen für TPA3220DDW – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

TPA3220DDWR

✅ Drop-In
📦 HTSSOP-44 (DDW) pad-down
Identical die, pinout and 60 W stereo / 110 W mono ratings; difference is shipping format only (tape and reel vs tube), 0% change in key parameters

📋 Referenzalternative (nicht im Katalog)

TPA3220DDW Grenzwerte & elektrische Eigenschaften

Stereo Output Power 60 W
Mono Peak Output Power 110 W
Supply Voltage Range 7 V to 32 V
Amplifier Type Class-D
Audio Input Type Analog input
Maximum Analog Input 2 V RMS
Selectable Gain Settings 18 dB, 24 dB, 30 dB, and 34 dB
Feedback Bandwidth Up to 100 kHz
Peak Efficiency >90%
Idle Power <0.25 W
Standby Power <0.1 W
Output MOSFET Resistance 70 mΩ
Channel Configuration 1-channel mono or 2-channel stereo
Modulation Modes Analog differential (AD) or low-idle-current HEAD
Gehäuse 44-pin HTSSOP (DDW) with exposed pad
Package Width 6.20 mm

TPA3220DDW 6.20 mm Pinbelegungsleitfaden

Pinbelegung für TPA3220DDW (6.20 mm-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für TPA3220DDW im 6.20 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TPA3220DDW.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TPA3220DDW ist geeignet für 6 Anwendungs: Stereo Powered Speaker, Compact Subwoofer Amplifier, Home Theater Soundbar, Powered Monitor Speaker, Automotive Audio Amplifier, Portable Speaker System.

🎧

Stereo Powered Speaker

The TPA3220DDW fits a stereo powered-speaker design requiring up to 60 W per channel from a 7 V to 32 V supply. Its four analog gain settings accommodate source levels from 18 dB through 34 dB, allowing input scaling without changing the amplifier architecture. The 100 kHz feedback bandwidth supports low audio-band distortion, while greater than 90% efficiency reduces heat in continuously active speakers. Place the output filters, input network, and exposed-pad ground connection according to the manufacturer reference layout.

🔊

Compact Subwoofer Amplifier

For a compact subwoofer, TPA3220DDW can operate in its 110 W peak mono configuration while using the same analog-input Class-D architecture as a stereo design. The 70 mΩ MOSFET output stage and greater than 90% efficiency are valuable when amplifier heat must be limited in a sealed or space-constrained enclosure. Designers should use the manufacturer output-filter and thermal guidance and verify continuous power against the selected speaker impedance and supply rail.

📺

Home Theater Soundbar

The TPA3220DDW is suitable for soundbar amplification where low idle power, compact packaging, and stereo output capability are important. Its standby power below 0.1 W and selectable AD or HEAD modulation allow the system designer to balance playback efficiency against low-power behavior. The 44-pin HTSSOP with exposed pad supports dense layouts, but thermal analysis remains necessary because continuous audio output can raise junction temperature despite the amplifier's high conversion efficiency.

🎵

Powered Monitor Speaker

A powered studio or desktop monitor can use the TPA3220DDW for efficient analog-input amplification with up to 60 W stereo output. The 18 dB, 24 dB, 30 dB, and 34 dB gain choices simplify adaptation to line-level source voltages, while the differential-input option helps reject noise when the source and amplifier share a ground reference. Use short, shielded analog routes and the manufacturer input-filter values to preserve audio-band signal integrity.

🚗

Automotive Audio Amplifier

The TPA3220DDW's 7 V to 32 V supply range and efficient Class-D output stage can fit automotive audio power stages where available supply voltage is constrained. Its 110 W peak mono capability is useful for a subwoofer channel, and the 60 W stereo rating supports two front-channel outputs. Automotive qualification status, transient protection, and operating-temperature limits must be confirmed from the manufacturer documentation before using the device in a vehicle application.

🔋

Portable Speaker System

The TPA3220DDW suits portable or battery-assisted speakers because greater than 90% efficiency improves the usable output obtained from a limited power budget. The low-idle-current HEAD mode and standby power below 0.1 W are useful when the amplifier is enabled intermittently, while the seven-volt minimum operating voltage supports suitably designed low-voltage rails. Protection, reverse-polarity control, battery transients, and acoustic output limits must be handled outside the amplifier.

What is the TPA3220DDW?
The TPA3220DDW is a Texas Instruments analog-input Class-D audio amplifier for stereo and mono speaker drive. It supports up to 60 W per channel in stereo mode and 110 W peak mono output from a 7 V to 32 V supply. The device is packaged in a 44-pin HTSSOP with an exposed thermal pad and accepts single-ended or differential analog input signals.
What are the key specifications of TPA3220DDW that engineers should know?
The TPA3220DDW provides 60 W stereo output, 110 W peak mono output, a 7 V to 32 V operating range, and greater than 90% efficiency. Its analog input section accepts signals up to 2 V RMS and offers four gains: 18 dB, 24 dB, 30 dB, and 34 dB. Closed-loop feedback bandwidth extends to 100 kHz, while idle and standby power remain below 0.25 W and 0.1 W, respectively.
Where can I download the TPA3220DDW datasheet PDF?
The manufacturer datasheet is available from the Texas Instruments TPA3220 documentation page at https://www.ti.com/lit/ds/symlink/tpa3220.pdf. It is the controlling document for electrical characteristics, absolute maximum ratings, pin assignments, typical application circuits, exposed-pad layout, and recommended component values. Use the device-specific ordering information on the product page to confirm the DDW package configuration.
Where can I find the TPA3220DDW pinout?
The TPA3220DDW pinout is defined by the Texas Instruments manufacturer datasheet and the DDW package drawing. The device uses a 44-pin HTSSOP with an exposed pad, and the exposed pad is electrically connected to the ground plane. Before assigning PCB nets, use the pin-description table and land-pattern dimensions from the manufacturer datasheet rather than relying on a generic HTSSOP drawing.
What input voltage range does the TPA3220DDW support?
The TPA3220DDW operates from 7 V to 32 V. This range supports conventional Class-D audio rails while providing headroom for higher output power. The manufacturer datasheet contains detailed operating information for supply voltage, output configuration, thermal conditions, and protection behavior, so the complete electrical limits should be checked before applying any supply transient.
How much power can the TPA3220DDW deliver to speakers?
The TPA3220DDW is specified for 60 W stereo output and 110 W peak mono output. Achievable continuous output depends on the selected mono or stereo configuration, supply voltage, speaker impedance, thermal design, and output-filter implementation. For a valid thermal and acoustic design, follow the manufacturer application guidance and verify performance on the intended PCB and speaker network.
What gain settings are available on the TPA3220DDW?
The TPA3220DDW provides four selectable gain settings: 18 dB, 24 dB, 30 dB, and 34 dB. These options accommodate different analog-source levels while keeping the input interface flexible. Gain selection affects headroom and the maximum achievable output swing, so the source amplitude should be evaluated before fixing the board configuration.
What can replace the TPA3220DDW?
A drop-in replacement must use the same 44-pin HTSSOP (DDW) footprint, preserve pin-to-pin signal and power connections, and meet the 7 V to 32 V supply, 60 W stereo, 110 W peak mono, and analog-input requirements. No distinct pin-compatible replacement is identified in the cross-reference results. TPA3220DDWR has the same core device in tape-and-reel packaging, but it is a shipping-format variant rather than a distinct engineering alternative.
Is the TPA3220DDWR the same as the TPA3220DDW?
TPA3220DDWR is a tape-and-reel shipping option for the TPA3220, while TPA3220DDW is identified as the tube option in comparison listings. Both denote the same Texas Instruments amplifier family and 44-pin HTSSOP configuration. The distinction is orderable packaging format rather than an increase or decrease in electrical performance.
What is the best Texas Instruments equivalent for TPA3220DDW?
The closest Texas Instruments orderable equivalent is TPA3220DDWR because it retains the same TPA3220 device, 44-pin HTSSOP (DDW) package, analog input, stereo and mono output capability, and specified supply range. Its primary difference is tape-and-reel rather than tube packaging. It is therefore a packaging-form equivalent, not a different amplifier design.
TPA3220DDW vs TPA3220DDWR: which is better for a new design?
TPA3220DDW and TPA3220DDWR share the same electrical identity; the meaningful difference is the orderable shipping format. Choose TPA3220DDW when the assembly process expects a tube, and choose TPA3220DDWR when the assembly process expects tape-and-reel reels. Both use the 44-pin HTSSOP (DDW) package and are governed by the same TPA3220 manufacturer documentation.
When should I choose TPA3220DDW over another Class-D amplifier?
Choose TPA3220DDW when the design needs analog input, 7 V to 32 V operation, up to 60 W stereo or 110 W peak mono output, and a 44-pin HTSSOP implementation with an exposed pad. The four gain settings and choice of AD or HEAD modulation provide additional design flexibility. It is preferable when the speaker topology and thermal design are already aligned with the manufacturer reference configuration.
Is TPA3220DDW suitable for a low-idle home-audio amplifier?
Yes, TPA3220DDW is suitable for a low-idle home-audio amplifier because it provides greater than 90% efficiency, idle power below 0.25 W, standby power below 0.1 W, and a low-idle-current HEAD modulation option. The actual idle result depends on configuration and operating mode, so verify the selected modulation scheme, supply condition, and thermal design in the final system.
How should the TPA3220DDW exposed pad be handled on a PCB?
The TPA3220DDW exposed pad must be connected to ground and implemented as a thermal and electrical land using the manufacturer land-pattern guidance. Keep the exposed-pad copper free of unintended shorts and connect it to the ground plane with adequate via density for heat spreading. Use the package drawing for exact pad dimensions and solder-mask clearances because a generic 44-pin HTSSOP footprint may not match DDW.
Where can I buy TPA3220DDW and request current pricing and lead time?
Use the Request a Quote form on this page to request TPA3220DDW pricing, stock confirmation, minimum order quantity, and current lead time. Quote requests are the appropriate route because availability and commercial terms can change independently of the technical product record. For component evaluation, request the exact TPA3220DDW ordering code and confirm the desired tube shipping format.

Technische Referenzdaten für TPA3220DDW – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose TPA3220DDW for an analog-input Class-D design requiring 7 V to 32 V operation, 60 W stereo output, or 110 W peak mono output in a 44-pin HTSSOP (DDW). Its four gain settings, AD and HEAD modulation options, greater than 90% efficiency, and low idle and standby power make it especially useful for powered speakers, subwoofers, soundbars, and compact audio systems. The exposed pad requires careful PCB thermal design. No distinct pin-compatible amplifier is identified in the cross-reference results; TPA3220DDWR is the same electrical device in tape-and-reel packaging rather than a functional substitute. For any proposed third-party replacement, require evidence of identical pinout, supply limits, gain configuration, modulation behavior, output-filter requirements, and thermal performance before treating it as drop-in.

Designhinweise

The DDW package uses its exposed pad as the primary thermal path. Connect the pad to the PCB ground plane with multiple thermal vias and preserve the manufacturer land-pattern dimensions. Continuous output power and ambient temperature determine the required copper area; even a greater-than-90%-efficient amplifier converts a portion of its input power into heat. Check the exposed-pad temperature during maximum-output operation rather than relying only on amplifier efficiency.

Use the manufacturer layout as the basis for the input filter, output filter, power connections, and exposed-pad land. Keep the analog input route away from the Class-D switching nodes and the high-current output paths. Place input and output capacitors at the pins identified by the application diagram, and provide a continuous, low-impedance ground reference between the exposed pad, input return, and output-filter return.

Do not substitute a generic 44-pin HTSSOP footprint without checking the DDW exposed-pad dimensions and paste pattern. Also confirm the selected AD or HEAD modulation mode, analog gain, mono bridge configuration, and speaker load against the manufacturer data. The four gain settings are mutually exclusive operating choices, and their availability through configuration pins must be verified for the intended board revision.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements with the manufacturer before qualification.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

TPA3220DDW datasheet TPA3220DDW pinout TPA3220DDW datasheet pdf TPA3220DDW specifications TPA3220DDW 44 HTSSOP TPA3220DDW equivalent TPA3220DDW replacement TPA3220DDW cross reference TPA3220DDW vs TPA3220DDWR TPA3220DDW Class-D amplifier TPA3220DDW stereo amplifier TPA3220DDW subwoofer amplifier TPA3220DDW 60W 32V TPA3220DDW price Texas Instruments TPA3220DDW

Verwandte Bauteile & Begriffe

Texas Instruments TPA3220DDW TPA3220DDWR Class-D amplifier audio amplifier power-management semiconductor analog input single-ended input differential input AD modulation HEAD modulation stereo amplifier mono amplifier closed-loop feedback feedback bandwidth power-supply rejection ratio 60 W stereo output 110 W peak mono output 7 V to 32 V supply greater than 90% efficiency 70 mΩ MOSFET 44-pin HTSSOP DDW package exposed pad surface-mount package speaker amplifier subwoofer amplifier soundbar analog differential low-idle-current modulation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen