TS3L100D - 4-Channel 3.3V SPDT LAN Switch | Texas Instruments
Teilenummer: TS3L100D ✓ AktivTS3L100D Übersicht
An SPDT switch is an analog switch that selects one of two signal paths from a common terminal. The TS3L100 belongs to the broader LAN-switch, analog-switch, multiplexer, interface-IC, and semiconductor hierarchy. Its four-channel architecture consolidates repetitive signal-routing functions while reducing the number of discrete switches required in networking, test, measurement, and embedded communication equipment.
Key features include four independently addressed SPDT channels, a common switch-enable control, 3.3 V operation, wide signal bandwidth, and low on-state resistance. The on-state resistance is important because signal attenuation and insertion loss can increase as switch resistance rises. Wide bandwidth also makes the device useful when routing higher-frequency data or analog signals rather than only slow control signals.
The TS3L100D combines multiplexing and demultiplexing in one device. It can route a common source toward either destination, or direct one of two inputs to a shared output, depending on the external connection and enable state. This dual-use architecture allows the same device to support shared test equipment, muxed signal paths, line monitoring, and compact network-interface routing.
Typical applications include 10/100 Ethernet PHY signal routing, LAN interface multiplexing, test-and-measurement signal paths, instrumentation, network adapters, and embedded systems that require multiple high-speed connections. In Ethernet designs, the switch can reduce the number of discrete routing components while preserving a compact board footprint.
PCB layout should keep input and output traces short, provide a solid ground reference, and decouple the 3.3 V supply near the device. Designers should consult the Texas Instruments pin-description table before routing signals because the exact enable polarity, channel pin mapping, and breakout configuration must match the intended PCB footprint.
This product page consolidates the official device description, package information, sourcing guidance, application analysis, and verified-source links. It also distinguishes confirmed electrical characteristics from parameters that require confirmation from the manufacturer datasheet before schematic or layout release.
Drop-in-Alternativen für TS3L100D – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernTS3L100D Grenzwerte & elektrische Eigenschaften
| Product Type | Quad SPDT wide-bandwidth LAN switch |
| Number of Channels | 4 channels |
| Switch Configuration | SPDT, 2:1 multiplexer or demultiplexer per channel |
| Versorgungsspannung | 3.3 V |
| Switch-Enable Control | Single switch-enable input |
| Number of SPDT Paths | 4 independent SPDT paths |
| Gehäuse | 16-pin SOIC |
| Montageart | Surface mount |
| Pin-Anzahl | 16 pins |
| RoHS-Status | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
TS3L100D 16-pin soic Pinbelegungsleitfaden
Pinbelegung für TS3L100D (16-pin soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für TS3L100D.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
TS3L100D ist geeignet für 6 Anwendungs: 10/100 Ethernet LAN Signal Routing, Test and Measurement Signal Multiplexing, Network Adapter Signal Demultiplexing, Embedded Communication Interface Conditioning, Industrial Equipment Signal Routing, Low-Level Analog Signal Multiplexing.
10/100 Ethernet LAN Signal Routing
The TS3L100D is suitable for compact Ethernet-interface routing because it combines four SPDT paths, a 3.3 V supply, and a common switch-enable input in one 16-pin SOIC package. Place it where the design must route multiple differential or single-ended LAN-related signals without allocating four separate switch packages. The wide-bandwidth switching architecture is intended for LAN signal paths, although the selected Ethernet rate, insertion loss, isolation, and crosstalk must be checked against the manufacturer datasheet. Differential pair routing should remain symmetrical, with switch transition effects and ground discontinuities minimized. The common enable signal also simplifies control, but system timing must ensure the switch does not alter a signal during an active communication interval.
Empfohlen
Test and Measurement Signal Multiplexing
The TS3L100D can reduce the component count in instrumentation that must route several measurement or control paths through a shared connector or front end. Its four 2:1 channels provide enough routing density for a four-way SPDT multiplexer arrangement while the shared enable input simplifies system control. Place the device close to the protected measurement path to minimize trace pickup and capacitance. Review maximum signal amplitude, bandwidth, on-state resistance, off-state isolation, and crosstalk before assigning signals, especially when precision attenuation or low-level sensor measurements are involved. A grounded guard or shield can be useful where leakage from disabled channels could affect the result.
Empfohlen
Network Adapter Signal Demultiplexing
The TS3L100D can demultiplex two incoming paths onto a shared downstream connection because each channel supports a 1-of-2 routing arrangement. This is useful in compact network adapters and interface-conditioning boards where several source lines must converge before reaching a controller or connector. The 16-pin SOIC package helps preserve board area, while the common enable input provides a compact control scheme. Signal integrity depends on keeping the shared trace away from switching nodes and high-energy sources. Designers should verify the exact pin assignment, logic levels, and allowable signal conditions in the Texas Instruments datasheet before finalizing the schematic because a shared enable function simplifies control but does not remove the need for valid sequencing during data transfer.
Empfohlen
Embedded Communication Interface Conditioning
The TS3L100D fits embedded boards that need to select among communication or diagnostic paths while operating from a 3.3 V rail. Its common enable input can be driven by a microcontroller or system-control logic, and the four channels provide multiple routing points without a large package footprint. Keep the switching device near the connector or transceiver to limit trace length and reduce exposure to unrelated digital switching noise. The design must account for signal polarity, logic thresholds, and the transition interval associated with changing the enable state. For systems where data integrity is critical, change routing only while the associated interface is inactive or include an appropriate external isolation strategy.
Empfohlen
Industrial Equipment Signal Routing
The TS3L100D can consolidate routing in industrial equipment that selects among external interfaces, diagnostic nodes, or controller connections. Its four SPDT channels and shared enable control provide a practical balance between routing density, control simplicity, and board area. For industrial use, place the switch away from motor-control nodes and high-current switching stages, and route its ground return directly to the system ground plane. Verify the maximum operating temperature, supply tolerance, isolation, and signal-current limits in the manufacturer documentation. A common enable signal reduces control-pin count, but system-level diagnostics should still confirm the selected path where a misrouted command could affect equipment behavior.
Empfohlen
Low-Level Analog Signal Multiplexing
Although marketed as a LAN switch, the TS3L100D can serve as a four-channel analog multiplexer when its on-state resistance, bandwidth, isolation, and signal limits suit the application. It is particularly relevant to slow control signals, sensor paths, or diagnostic nodes that share a common converter or connector. Place the switch at the common signal node and keep switched branches short to reduce parasitic capacitance and leakage effects. Review off-state isolation and crosstalk when multiplexing low-amplitude sources because leakage through an open channel can dominate the measurement error. The shared enable input should be controlled with a settling interval before conversion, and the 3.3 V device must remain within its stated signal and supply limits during power sequencing.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für TS3L100D – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Product Type | Quad SPDT wide-bandwidth LAN switch |
| Brand | Texas Instruments |
| Package | 16-pin SOIC |
| Number of Channels | 4 channels |
| Switch Configuration | SPDT, 2:1 multiplexer or demultiplexer per channel |
| Supply Voltage | 3.3 V |
| Control Interface | Single switch-enable input |
Wichtigste Unterscheidungsmerkmale
- Four-channel integration (vs. No verified drop-in alternative)
- Shared switching control (vs. No verified drop-in alternative)
- Bidirectional signal-path use (vs. No verified drop-in alternative)
Designhinweise
Route all switched signal traces as short and direct as practical, with continuous ground beneath the device. Keep the common switch-enable trace away from sensitive analog branches, and connect the device ground pins to the main ground plane using short paths. Because the TS3L100D supports multiplexing and demultiplexing through external connections, the PCB topology determines how each SPDT path behaves. Review the manufacturer pin table and package drawing before assigning the 16 SOIC positions.
Confirm on-state resistance, bandwidth, off-state isolation, crosstalk, and input capacitance in the manufacturer datasheet before assigning high-speed or low-amplitude signals. Longer traces magnify capacitance and reflections, while disabled-channel leakage can affect precision measurements. Keep sensitive branches short and provide a clean reference plane. When changing the shared enable state during an active transfer, allow the circuit to settle or switch while the connected interface is inactive.
Place the 3.3 V bypass capacitor close to the supply pins and provide a low-impedance connection to the ground plane. Confirm the exact capacitor value, bias requirements, and permitted ESR from the manufacturer recommendations. Estimated: actual switching-node dissipation cannot be calculated without the finalized on-state resistance and signal current, so thermal sizing should use the worst-case device dissipation once those parameters are established.
Do not approve a replacement based only on the 16-pin SOIC outline or four-channel SPDT description. Verify the numbered pinout, common-enable polarity, logic thresholds, supply tolerances, signal swing, bandwidth, and isolation against the TS3L100D datasheet. The package suffix alone does not establish electrical equivalence. Also avoid using the family name TS3L100 as an orderable substitute without confirming the complete MPN and package configuration.
Compliance-Informationen
The retrieved product excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations and qualification information through the manufacturer product documentation before production release.