Texas Instruments

TS3L100D - 4-Channel 3.3V SPDT LAN Switch | Texas Instruments

料号: TS3L100D ✓ 量产中
3.3 V Vdss 16-pin SOIC Package
最小起订量: 1 |

TS3L100D 概述

Texas Instruments TS3L100D is a four-channel, 3.3 V SPDT wide-bandwidth LAN switch with low on-state resistance, supplied in a 16-pin SOIC package. It provides two independent 2:1 multiplexer or demultiplexer paths per channel and uses a common switch-enable input, making it suitable for routing Ethernet-class signals through a compact analog switch network.

An SPDT switch is an analog switch that selects one of two signal paths from a common terminal. The TS3L100 belongs to the broader LAN-switch, analog-switch, multiplexer, interface-IC, and semiconductor hierarchy. Its four-channel architecture consolidates repetitive signal-routing functions while reducing the number of discrete switches required in networking, test, measurement, and embedded communication equipment.

Key features include four independently addressed SPDT channels, a common switch-enable control, 3.3 V operation, wide signal bandwidth, and low on-state resistance. The on-state resistance is important because signal attenuation and insertion loss can increase as switch resistance rises. Wide bandwidth also makes the device useful when routing higher-frequency data or analog signals rather than only slow control signals.

The TS3L100D combines multiplexing and demultiplexing in one device. It can route a common source toward either destination, or direct one of two inputs to a shared output, depending on the external connection and enable state. This dual-use architecture allows the same device to support shared test equipment, muxed signal paths, line monitoring, and compact network-interface routing.

Typical applications include 10/100 Ethernet PHY signal routing, LAN interface multiplexing, test-and-measurement signal paths, instrumentation, network adapters, and embedded systems that require multiple high-speed connections. In Ethernet designs, the switch can reduce the number of discrete routing components while preserving a compact board footprint.

PCB layout should keep input and output traces short, provide a solid ground reference, and decouple the 3.3 V supply near the device. Designers should consult the Texas Instruments pin-description table before routing signals because the exact enable polarity, channel pin mapping, and breakout configuration must match the intended PCB footprint.

This product page consolidates the official device description, package information, sourcing guidance, application analysis, and verified-source links. It also distinguishes confirmed electrical characteristics from parameters that require confirmation from the manufacturer datasheet before schematic or layout release.

直接替换替代料: TS3L100D ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

TS3L100D 最大额定值与电气特性

Product Type Quad SPDT wide-bandwidth LAN switch
Number of Channels 4 channels
Switch Configuration SPDT, 2:1 multiplexer or demultiplexer per channel
电源电压 3.3 V
Switch-Enable Control Single switch-enable input
Number of SPDT Paths 4 independent SPDT paths
封装 16-pin SOIC
安装类型 Surface mount
引脚数量 16 pins
RoHS 状态 unknown
REACH Status unknown
AEC-Q100 Qualification unknown

TS3L100D 16-pin soic 引脚配置指南

TS3L100D(16-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TS3L100D 的 16-pin soic 封装引脚图

暂无详细引脚数据: TS3L100D.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TS3L100D 适用于 6 应用s: 10/100 Ethernet LAN Signal Routing, Test and Measurement Signal Multiplexing, Network Adapter Signal Demultiplexing, Embedded Communication Interface Conditioning, Industrial Equipment Signal Routing, Low-Level Analog Signal Multiplexing.

🌐

10/100 Ethernet LAN Signal Routing

The TS3L100D is suitable for compact Ethernet-interface routing because it combines four SPDT paths, a 3.3 V supply, and a common switch-enable input in one 16-pin SOIC package. Place it where the design must route multiple differential or single-ended LAN-related signals without allocating four separate switch packages. The wide-bandwidth switching architecture is intended for LAN signal paths, although the selected Ethernet rate, insertion loss, isolation, and crosstalk must be checked against the manufacturer datasheet. Differential pair routing should remain symmetrical, with switch transition effects and ground discontinuities minimized. The common enable signal also simplifies control, but system timing must ensure the switch does not alter a signal during an active communication interval.

📏

Test and Measurement Signal Multiplexing

The TS3L100D can reduce the component count in instrumentation that must route several measurement or control paths through a shared connector or front end. Its four 2:1 channels provide enough routing density for a four-way SPDT multiplexer arrangement while the shared enable input simplifies system control. Place the device close to the protected measurement path to minimize trace pickup and capacitance. Review maximum signal amplitude, bandwidth, on-state resistance, off-state isolation, and crosstalk before assigning signals, especially when precision attenuation or low-level sensor measurements are involved. A grounded guard or shield can be useful where leakage from disabled channels could affect the result.

🖥️

Network Adapter Signal Demultiplexing

The TS3L100D can demultiplex two incoming paths onto a shared downstream connection because each channel supports a 1-of-2 routing arrangement. This is useful in compact network adapters and interface-conditioning boards where several source lines must converge before reaching a controller or connector. The 16-pin SOIC package helps preserve board area, while the common enable input provides a compact control scheme. Signal integrity depends on keeping the shared trace away from switching nodes and high-energy sources. Designers should verify the exact pin assignment, logic levels, and allowable signal conditions in the Texas Instruments datasheet before finalizing the schematic because a shared enable function simplifies control but does not remove the need for valid sequencing during data transfer.

🔧

Embedded Communication Interface Conditioning

The TS3L100D fits embedded boards that need to select among communication or diagnostic paths while operating from a 3.3 V rail. Its common enable input can be driven by a microcontroller or system-control logic, and the four channels provide multiple routing points without a large package footprint. Keep the switching device near the connector or transceiver to limit trace length and reduce exposure to unrelated digital switching noise. The design must account for signal polarity, logic thresholds, and the transition interval associated with changing the enable state. For systems where data integrity is critical, change routing only while the associated interface is inactive or include an appropriate external isolation strategy.

🏭

Industrial Equipment Signal Routing

The TS3L100D can consolidate routing in industrial equipment that selects among external interfaces, diagnostic nodes, or controller connections. Its four SPDT channels and shared enable control provide a practical balance between routing density, control simplicity, and board area. For industrial use, place the switch away from motor-control nodes and high-current switching stages, and route its ground return directly to the system ground plane. Verify the maximum operating temperature, supply tolerance, isolation, and signal-current limits in the manufacturer documentation. A common enable signal reduces control-pin count, but system-level diagnostics should still confirm the selected path where a misrouted command could affect equipment behavior.

📡

Low-Level Analog Signal Multiplexing

Although marketed as a LAN switch, the TS3L100D can serve as a four-channel analog multiplexer when its on-state resistance, bandwidth, isolation, and signal limits suit the application. It is particularly relevant to slow control signals, sensor paths, or diagnostic nodes that share a common converter or connector. Place the switch at the common signal node and keep switched branches short to reduce parasitic capacitance and leakage effects. Review off-state isolation and crosstalk when multiplexing low-amplitude sources because leakage through an open channel can dominate the measurement error. The shared enable input should be controlled with a settling interval before conversion, and the 3.3 V device must remain within its stated signal and supply limits during power sequencing.

What are the key specifications of TS3L100D that engineers should know?
The TS3L100D is a four-channel, 3.3 V SPDT LAN switch in a 16-pin SOIC package. According to the Texas Instruments product description, each channel can operate as a 2:1 multiplexer or demultiplexer, while a common enable input controls the switching function. The device is characterized as a wide-bandwidth LAN switch with low on-state resistance. Exact resistance, bandwidth, isolation, capacitance, and timing limits should be taken from the manufacturer datasheet when sizing insertion loss and switching performance.
What is the operating voltage of TS3L100D?
The TS3L100D operates from a 3.3 V supply. According to the Texas Instruments TS3L100 product page, the device is a 3.3 V, 2:1 SPDT, four-channel LAN switch. The 16-pin SOIC implementation provides a common switch-enable input, allowing the switching network to be controlled by a shared logic signal while individual SPDT paths provide flexible signal routing.
How many channels and switch positions does TS3L100D have?
The TS3L100D contains four SPDT channels, providing two selectable paths per channel. According to Texas Instruments, the part is a 4-bit, 1-of-2 multiplexer or demultiplexer with a single switch-enable input. This arrangement can route a common signal toward either of two destinations or combine two source paths onto one output when the board connections are configured for demultiplexing.
What package is TS3L100D supplied in?
The TS3L100D is supplied in a 16-pin SOIC package. Distributor product records identify the component as a 4-channel, 16-SOIC networking switch, and the Texas Instruments family listing confirms the TS3L100 device family. Before PCB release, use the manufacturer pin-description table and package drawing to verify every signal, enable, supply, and ground connection against the selected ordering configuration.
Where can I download the TS3L100D datasheet PDF?
The TS3L100D datasheet is available through the Texas Instruments TS3L100 product page and the indexed PDF links associated with the part. The manufacturer product page is the preferred starting point because it links the current documentation and ordering information. The indexed PDF record identifies the document as 26 pages, but engineers should verify the revision and ordering details on the Texas Instruments page before using it for design release.
Where can I find the TS3L100D pinout?
The TS3L100D pinout must be obtained from the pin-description table in the manufacturer datasheet. The package is a 16-pin SOIC, but the available product snippets do not expose the complete numbered pin list or individual pin names. Use the Texas Instruments package drawing and pin table to map each SPDT terminal, the shared enable input, supply, and ground before routing the PCB.
Can TS3L100D be used as both a multiplexer and a demultiplexer?
Yes, the TS3L100D can support either multiplexing or demultiplexing through its external connections and switch-enable control. According to the manufacturer description, it is a 4-bit, 1-of-2 multiplexer or demultiplexer. In multiplex mode, a common source is directed toward one of two destinations; in demultiplex mode, one of two sources is directed toward a shared destination.
TS3L100D vs TS3L100 - what is the difference?
TS3L100 is the Texas Instruments device family, while TS3L100D identifies the orderable package configuration listed as a 16-pin SOIC part. The manufacturer page describes both around the same four-channel, 3.3 V SPDT LAN-switch family. Because the abbreviated family designation does not establish a separate complete ordering code, engineers should treat TS3L100D as the specific MPN and consult the ordering table before comparing a different suffix or package.
What is the best drop-in replacement for TS3L100D?
No verified drop-in replacement for the TS3L100D was identified from the available cross-reference information. A valid replacement must use the 16-pin SOIC footprint, preserve all four SPDT paths and the common enable function, and remain within acceptable limits for on-state resistance, bandwidth, supply voltage, and channel isolation. The Request a Quote form on this page can be used to ask about approved alternatives or supply continuity.
Can a cross-brand equivalent replace TS3L100D?
No cross-brand equivalent was confirmed as pin-to-pin compatible with the TS3L100D. The available cross-reference search did not identify a specific manufacturer and MPN that could be verified against the 16-pin SOIC pinout, four-channel SPDT architecture, 3.3 V operation, and common enable input. A substitute should not be approved based on channel count or package appearance alone; its datasheet and pin table must be checked against the original design.
When should I choose TS3L100D over a discrete SPDT switch?
Choose the TS3L100D when the design needs four coordinated SPDT paths, a common enable input, and a compact 16-pin SOIC implementation. Integrating the channels in one IC reduces the number of separate switch packages and simplifies control routing. A discrete-switch approach may be preferable when channel widths, isolation requirements, signal levels, or special impedance characteristics differ substantially from those supported by the TS3L100D.
Is TS3L100D suitable for Ethernet LAN signal routing?
The TS3L100D is specifically described by Texas Instruments as a quad SPDT wide-bandwidth LAN switch for 3.3 V operation. Its four switching channels make it appropriate for routing multiple LAN-related signal paths when the required bandwidth, insertion loss, isolation, and logic levels meet the device specifications. Validate the maximum signal rate and channel performance against the manufacturer datasheet for the selected Ethernet standard.
Does TS3L100D need a heatsink or special thermal treatment?
The available information does not establish whether the TS3L100D requires a heatsink. Its 16-pin SOIC package and 3.3 V supply indicate that thermal design must account for power dissipation and the PCB copper available around the device. Check the manufacturer power-dissipation and thermal-resistance data, then calculate junction temperature for the maximum expected load before deciding whether copper spreading is required.
Where can I buy TS3L100D and what is its current lead time?
Current commercial availability, order quantity, and lead time for the TS3L100D should be requested through the Request a Quote form on this page. The verified product records do not provide a quantity-break schedule or a firm factory lead-time commitment for the exact MPN. Providing the required quantity, packaging preference, target date, and production quantity enables the sourcing team to return an actionable quotation.
What is the price of TS3L100D?
The current price of the TS3L100D should be obtained through the Request a Quote form on this page. The verified listings identify the exact part and package, but they do not show qualifying quantity-break prices with explicit quantities for this MPN. A quote request with the required order quantity and target date avoids presenting an incomplete or potentially stale commercial figure.
Is TS3L100D in stock and RoHS compliant?
Current TS3L100D stock status should be confirmed through the Request a Quote form on this page. The available manufacturer and distributor records identify the device but do not provide a definitive current stock count. RoHS and REACH status are also not stated in the retrieved product excerpts, so compliance should be confirmed from the manufacturer’s current product documentation or declaration before a regulated production release.

工程参考数据: TS3L100D ——对比、设计指导和合规信息。

选型指南

Choose the TS3L100D when a 3.3 V system requires four coordinated SPDT paths in a compact 16-pin SOIC package and can use a common switch-enable input. It is especially relevant to LAN-interface routing, test-signal multiplexing, network-adapter path selection, and embedded equipment that benefits from integrating repeated switching functions. The decisive checks are maximum signal rate, on-state resistance, isolation, crosstalk, logic thresholds, and operating temperature. A discrete-switch design may be preferable when each channel requires a different voltage, current rating, bandwidth, or impedance architecture. No drop-in substitute should be selected solely because it has four channels or a similar package; verify the numbered pinout and operating limits against the original TS3L100D. If low-level precision signals dominate the design, first confirm that off-channel leakage and capacitance are acceptable, because a LAN switch may not match a dedicated precision analog switch.

与替代料对比

参数 本产品
Product Type Quad SPDT wide-bandwidth LAN switch
Brand Texas Instruments
Package 16-pin SOIC
Number of Channels 4 channels
Switch Configuration SPDT, 2:1 multiplexer or demultiplexer per channel
Supply Voltage 3.3 V
Control Interface Single switch-enable input

关键差异点

  • Four-channel integration (对比 No verified drop-in alternative)
  • Shared switching control (对比 No verified drop-in alternative)
  • Bidirectional signal-path use (对比 No verified drop-in alternative)

设计说明

Route all switched signal traces as short and direct as practical, with continuous ground beneath the device. Keep the common switch-enable trace away from sensitive analog branches, and connect the device ground pins to the main ground plane using short paths. Because the TS3L100D supports multiplexing and demultiplexing through external connections, the PCB topology determines how each SPDT path behaves. Review the manufacturer pin table and package drawing before assigning the 16 SOIC positions.

Confirm on-state resistance, bandwidth, off-state isolation, crosstalk, and input capacitance in the manufacturer datasheet before assigning high-speed or low-amplitude signals. Longer traces magnify capacitance and reflections, while disabled-channel leakage can affect precision measurements. Keep sensitive branches short and provide a clean reference plane. When changing the shared enable state during an active transfer, allow the circuit to settle or switch while the connected interface is inactive.

Place the 3.3 V bypass capacitor close to the supply pins and provide a low-impedance connection to the ground plane. Confirm the exact capacitor value, bias requirements, and permitted ESR from the manufacturer recommendations. Estimated: actual switching-node dissipation cannot be calculated without the finalized on-state resistance and signal current, so thermal sizing should use the worst-case device dissipation once those parameters are established.

Do not approve a replacement based only on the 16-pin SOIC outline or four-channel SPDT description. Verify the numbered pinout, common-enable polarity, logic thresholds, supply tolerances, signal swing, bandwidth, and isolation against the TS3L100D datasheet. The package suffix alone does not establish electrical equivalence. Also avoid using the family name TS3L100 as an orderable substitute without confirming the complete MPN and package configuration.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The retrieved product excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations and qualification information through the manufacturer product documentation before production release.

相关搜索

TS3L100D datasheet TS3L100D datasheet pdf TS3L100D pinout TS3L100D 16-SOIC TS3L100D specifications TS3L100D 3.3V switch TS3L100D quad SPDT TS3L100D LAN switch TS3L100D equivalent TS3L100D replacement TS3L100D cross reference Texas Instruments TS3L100D TS3L100D price TS3L100D stock TS3L100D schematic

相关元器件 & 术语

Texas Instruments TS3L100D TS3L100 SPD T switch analog switch LAN switch multiplexer demultiplexer interface IC semiconductor 3.3 V supply common switch-enable input wide bandwidth low on-state resistance 16-pin SOIC SOIC package family surface-mount technology Ethernet LAN network adapter test and measurement signal routing off-state isolation crosstalk RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情