STMicroelectronics

TS556CDT - Dual 2.7MHz Timer IC | STMicroelectronics

Teilenummer: TS556CDT ✗ Abgekündigt
2 V to 16 V Vdss 130 µA Id 14-SOIC Package 2.7 MHz Speed
MOQ: 1 |

TS556CDT Übersicht

STMicroelectronics TS556CDT is a dual CMOS 555-type timer and oscillator with two independent timing channels, a maximum astable frequency of 2.7 MHz, and a 2 V to 16 V supply-voltage range. The device is packaged in a 14-pin SOIC and is pin-to-pin and functionally compatible with the bipolar NE556 timer family. Each channel can operate as a monostable pulse generator or an astable oscillator, making the TS556CDT suitable for timing, delay, pulse generation, modulation, and simple clock-generation circuits.

A 555-type timer is a clock-and-timing integrated circuit that compares an externally controlled timing voltage with a reference threshold and switches an output when the voltage crosses that threshold. In the monostable configuration, one external resistor and capacitor determine a single output pulse. In the astable configuration, two resistors and a capacitor establish continuous oscillation. The TS556 family belongs to the broader semiconductor hierarchy of clock and timing ICs, timer ICs, programmable timers, and oscillators.

The TS556CDT provides a maximum astable operating frequency of 2.7 MHz and operates from 2 V to 16 V. Its low power consumption is a notable characteristic: the manufacturer datasheet lists a typical supply current of 220 µA at 5 V and 180 µA at 3 V. One distributor technical listing reports 130 µA supply current, demonstrating that the operating-current figure can vary with supply voltage and test conditions. The commercial-temperature TS556CDT is specified for an operating range of 0 °C to 70 °C.

Using CMOS construction allows the TS556CDT to provide the functional behavior of the classic 555 timer in a low-power, dual-channel implementation. Both timer sections can be used independently, which reduces component count when a board requires two related timing functions. Equivalent internal oscillators can produce clocks for digital systems, while independently configured channels can create delayed pulses, retriggerable one-shots, window timers, or simple tone-generating circuits.

Typical applications include industrial control and instrumentation, digital delay networks, pulse-generation circuits, low-power sensor interfaces, tone generation, debounce and delay networks, embedded control systems, and general-purpose clock-generation modules. The 14-pin SOIC package is suitable for conventional surface-mount PCB assembly and allows straightforward hand soldering during prototype development.

When using the TS556CDT, calculate the timing resistor and capacitor tolerances because both directly determine pulse width and oscillation frequency. Keep the timing node away from noisy high-current traces, use a bypass capacitor close to the supply pins, and verify the discharge-transistor peak current against the chosen timing resistor. For battery-powered equipment, compare both operating current and the leakage contribution of the timing capacitors against the complete power budget.

This page combines the core electrical limits, operating-temperature range, package details, pin-compatibility information, application guidance, and selection considerations needed to evaluate the TS556CDT. It also identifies three closely related TS556 family ordering variants and clearly distinguishes their package and temperature-grade verification needs for drop-in replacement planning.

Drop-in-Alternativen für TS556CDT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit TS556CDT (gleiche Bauform und Footprint) – abweichend in Package, Timer Configuration, Operating Modes, Typical Supply Current at 5 V, Supply Current.

STMicroelectronics
Package: 14-SOIC, 0.154 inch body width, 3.90 mm
Timer Configuration: Two independent 555-type timer sections
Typical Supply Current at 5 V: 220 µA, manufacturer-family specification
Vergleichen mit TS556CDT →
STMicroelectronics
Package: 14-pin SOIC
Timer Configuration: Dual independent 555-type timer sections
Vergleichen mit TS556CDT →
STMicroelectronics
Package: 14-pin SOIC
Timer Configuration: Dual 555-type timer
Operating Modes: Astable and monostable
Vergleichen mit TS556CDT →

TS556CD

✅ Drop-In ⚠️ Spezifikationen ungeprüft
STMicroelectronics
📦 14-SOIC
Dual CMOS timer and oscillator · Two independent 555-type timer sections · 2.7 MHz · 2 V · 16 V · 130 µA, distributor specification · 220 µA, manufacturer-family specification · 0 °C to 70 °C

Preis auf Anfrage

Datenblatt ansehen →

TS556IDT

✅ Drop-In ⚠️ Spezifikationen ungeprüft
STMicroelectronics
📦 14-SOIC
Dual 555-type timer · 2.7 MHz · 2 V to 16 V · 220 uA at VCC = 5 V · 180 uA typical at VCC = 3 V · 6 mA at VCC = 5 V · Astable and monostable · CMOS

Preis auf Anfrage

Datenblatt ansehen →

TS556ID

✅ Drop-In ⚠️ Spezifikationen ungeprüft
STMicroelectronics
📦 14-SOIC
Dual independent 555-type timer sections · Monostable and astable · 2 V to 16 V · 220 µA · 180 µA · 2.7 MHz · NE556 · Pin-to-pin and functionally compatible with bipolar NE556

Preis auf Anfrage

Datenblatt ansehen →

TS556CDT Technische Daten

Timer Type 555 Type, dual timer/oscillator
Number of Timers 2 channels
Maximum Astable Frequency 2.7 MHz
Supply Voltage Range 2 V to 16 V
Versorgungsstrom 130 µA
Typical Supply Current at 5 V 220 µA
Typical Supply Current at 3 V 180 µA
Betriebstemperaturbereich 0 °C to 70 °C
Gehäuse 14-SOIC
Package Length 0.154 inch
Montageart Surface mount
Technology CMOS
Operating Modes Monostable and astable
Bipolar Compatibility Pin-to-pin and functionally compatible with NE556
Power Consumption Low power consumption
Product Category Programmable timers and oscillators

TS556CDT 0.154 inch Pinbelegungsleitfaden

Pinbelegung für TS556CDT (0.154 inch-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für TS556CDT im 0.154 inch-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TS556CDT.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TS556CDT ist geeignet für 6 Anwendungs: Dual Precision Delay Generation, Astable Clock and Tone Generation, Industrial Control and Retriggerable Timing, Low-Power Sensor Interface Timing, Pulse-Shaping and Modulation, Digital Boards and Embedded Control.

⏱️

Dual Precision Delay Generation

The TS556CDT is useful when one board requires two independent delay functions without allocating separate single-timer packages. Its two CMOS timer sections can each be configured for monostable operation with an external timing resistor and capacitor, allowing trigger-to-output delays to be established separately. The manufacturer specifies a 2 V to 16 V supply range, a maximum astable frequency of 2.7 MHz, and compatibility with bipolar NE556 behavior. Designers should verify timing accuracy against the tolerance and temperature coefficient of the selected R-C network. For low-power equipment, the listed typical currents of 180 µA at 3 V and 220 µA at 5 V provide a useful starting point, although capacitor leakage and downstream loads must also be included in the power budget.

🎵

Astable Clock and Tone Generation

Astable operation makes the TS556CDT suitable for generating a continuous low-frequency clock, audible tone, or modulation waveform. Each channel has its own timing network, so one section can generate a clock while the other produces a related tone or repetition pulse. The manufacturer datasheet identifies 2.7 MHz as the maximum astable frequency, giving designers a clear ceiling when calculating resistance, capacitance, and propagation delays. At low frequencies, capacitor leakage and input bias effects can materially shift the period, so stable film or low-leakage components are preferable. At higher frequencies, keep the timing node compact and isolated from switching nodes. The TS556's 2 V to 16 V operating range also permits use in both low-voltage portable systems and higher-voltage industrial control boards.

🏭

Industrial Control and Retriggerable Timing

The TS556CDT can implement retriggerable pulse-duration control, watchdog-style delay logic, and event-capture functions in industrial control equipment. Monostable operation allows an external event to initiate a defined output interval, while the independent second channel can monitor another event or provide a complementary timing sequence. Its 14-SOIC package is convenient for conventional surface-mount assembly, while the documented NE556 compatibility simplifies comparison with earlier bipolar timer designs. The TS556CDT's commercial temperature range is 0 °C to 70 °C, so it is appropriate for controlled indoor equipment rather than exposed or extended-temperature installations. Engineers should check timing tolerance, output rise and fall behavior, and supply current before finalizing the control-loop timing budget.

🧩

Low-Power Sensor Interface Timing

Battery-powered sensor interfaces can use the TS556CDT to establish measurement windows, debounce mechanical inputs, or generate periodic sampling triggers. The two timer sections reduce the need for multiple timer chips when a sensor requires both a short debounce interval and a longer acquisition delay. Typical supply-current figures of 180 µA at 3 V and 220 µA at 5 V establish the IC's basic consumption, but the complete system also depends on the timing capacitors' leakage and the frequency of timer activity. For duty-cycled designs, periodic wake-up behavior should be compared against the sensor's own idle current. Keep the timing node away from high-impedance sensor lines, provide local supply decoupling, and account for component tolerances when defining the acceptable sampling or debounce window.

📡

Pulse-Shaping and Modulation

The TS556CDT is appropriate for pulse shaping, burst generation, simple modulation, and repetitive trigger conditioning. One timer channel can generate a continuous astable waveform while the other shapes, gates, or delays that waveform in monostable mode. Its maximum astable frequency of 2.7 MHz provides flexibility from low-rate timing through substantially higher pulse rates, although output-drive and load limits must be checked for each timing network. The CMOS implementation and documented NE556 compatibility make it a logical successor to a bipolar dual timer when preserving the existing PCB footprint and behavior is important. For RF-adjacent or high-speed digital circuits, use short timing traces, a grounded return path, and local bypass capacitance to prevent supply or timing-node noise from degrading pulse edges.

🖥️

Digital Boards and Embedded Control

The TS556CDT can support legacy digital boards that retain discrete 555 timing functions during a redesign. Its two channels may replace separate monostable or astable circuits, while the 14-SOIC package simplifies PCB rework and prototype assembly. For embedded systems, the timer can produce a periodic service interval, delay a control action, or shape a reset-like pulse without occupying a microcontroller timer channel. Because the TS556CDT is specified for 0 °C to 70 °C, its use should remain within commercial environmental conditions. Validate the original circuit's trigger polarity, output pulse shape, and discharge-current demand before substituting the CMOS timer for a bipolar NE556. If timing accuracy dominates the design, quantify resistor and capacitor tolerance rather than relying on nominal frequency calculations alone.

What is the TS556CDT?
The STMicroelectronics TS556CDT is a dual CMOS 555-type timer and oscillator containing two independent timing channels. According to the manufacturer datasheet, each channel supports monostable and astable operation, the maximum astable frequency is 2.7 MHz, and the supply-voltage range is 2 V to 16 V. The device is packaged in a 14-pin SOIC and provides pin-to-pin and functional compatibility with the bipolar NE556 family.
What are the key specifications of TS556CDT that engineers should know?
The TS556CDT provides two independent 555-type timing channels, a 2.7 MHz maximum astable frequency, and operation from 2 V to 16 V in a 14-SOIC package. The manufacturer datasheet lists typical supply currents of 220 µA at 5 V and 180 µA at 3 V. Its commercial-temperature operating range is 0 °C to 70 °C, making it suitable for general commercial equipment rather than automotive or industrial temperature extremes.
Where can I download the TS556CDT datasheet PDF?
The TS556CDT datasheet PDF can be accessed through the datasheet source listed on this product page. The document identifies the device as a dual CMOS 555 timer with a maximum astable frequency of 2.7 MHz, a 2 V to 16 V supply range, low power consumption, and compatibility with bipolar NE556 devices. Use the manufacturer pin-description table when assigning PCB nets and checking each timer section independently.
Where can I find the TS556CDT pinout?
The TS556CDT uses a 14-pin SOIC, and its authoritative pin assignments are shown in the manufacturer datasheet pin-description table. The two timer sections can be considered as parallel functional blocks with their own timing and control connections, but the package numbering and exposed supply or ground connections must be taken directly from that table. Use the pin table to create the schematic and land pattern before assigning external timing components.
How is the TS556CDT used as a monostable timer?
The TS556CDT creates a timed output pulse in monostable mode after its trigger is asserted. The pulse duration is established by one timing resistor and one timing capacitor connected to the relevant channel, while the second timer channel remains available for another independent function. According to the manufacturer datasheet, the device supports both monostable and astable configurations, and its CMOS implementation is functionally compatible with bipolar NE556 timers.
How is the TS556CDT used as an astable oscillator?
The TS556CDT operates as a free-running astable oscillator when configured with two timing resistors and one timing capacitor for the selected channel. Each timer section can oscillate independently, enabling dual clock outputs or one clock plus one delayed pulse. The manufacturer datasheet specifies a maximum astable frequency of 2.7 MHz, so component tolerances and parasitic capacitance must be considered for high-frequency designs.
What is the supply voltage range of TS556CDT?
The TS556CDT operates from 2 V to 16 V according to the manufacturer datasheet. The same document lists typical supply currents of 180 µA at 3 V and 220 µA at 5 V, while one distributor listing reports 130 µA under its stated test conditions. Designers should use the datasheet limit values when checking startup, output levels, timing accuracy, and total power consumption.
Is the TS556CDT pin-compatible with the NE556?
Yes, the TS556CDT is described by the manufacturer datasheet as pin-to-pin and functionally compatible with bipolar NE556 devices. Both timer sections are implemented in CMOS within a 14-SOIC package. This compatibility makes it useful for replacing a NE556-based design when the operating voltage, timing limits, output behavior, and exact pin assignments satisfy the replacement requirements.
What is the best drop-in replacement for TS556CDT?
The closest same-family drop-in candidates are the TS556CD and TS556IDT ordering variants, both associated with the TS556 dual-timer family and the 14-SOIC footprint. The TS556IDT requires attention to its industrial temperature-grade details, while TS556CD requires confirmation of its ordering suffix and temperature grade. No cross-brand replacement with complete verified package and electrical data is listed, so validate the exact ordering code before substitution.
Can TS556IDT replace TS556CDT on the same PCB?
The TS556IDT can be considered for a TS556CDT replacement because it belongs to the same dual 555 timer family and is associated with the same 14-SOIC package format. According to the manufacturer family information, TS556 variants are designed for functional compatibility. Before replacing the device, verify pin assignments, supply limits, maximum timing frequency, and the required operating-temperature grade in the applicable ordering code.
TS556CDT vs TS556IDT: which is better for an industrial controller?
The TS556IDT is generally the more appropriate candidate when an industrial controller requires the broader temperature grade associated with that ordering variant. The TS556CDT is specified for 0 °C to 70 °C, while the exact TS556IDT limits should be confirmed in the manufacturer datasheet. Both are dual CMOS timers in the same 14-SOIC family, so verify temperature qualification, marking, supply limits, and qualification records before production release.
When should I choose TS556CDT over a generic NE556 replacement?
Choose the TS556CDT when a design specifically requires the STMicroelectronics dual CMOS timer family, its established NE556-compatible behavior, and the specified 2.7 MHz maximum astable frequency. A generic NE556-style device may have different output stages, supply current, timing tolerances, or package details. The TS556CDT is preferable when predictable operation within 2 V to 16 V and dual-channel integration are central to the design.
Is the TS556CDT suitable for battery-powered equipment?
The TS556CDT can suit battery-powered equipment because the manufacturer datasheet lists low power consumption, including typical supply currents of 180 µA at 3 V and 220 µA at 5 V. Actual battery life also depends on timing-capacitor leakage, output duty cycle, the duration of timer activity, and any external pull-up or pull-down loads. Size the timing capacitors for low leakage and include inactive-circuit leakage in the complete power budget.
Where to buy TS556CDT online?
Use the Request a Quote form on this page to ask about TS556CDT availability, current sourcing, and order handling. The manufacturer lists the TS556CDT as obsolete, so a quotation may involve legacy inventory, unallocated supply, or no direct manufacturing availability. Provide the required quantity, package suffix, date code, and inspection requirements so the sourcing response reflects the exact order configuration.
What is the price and lead time for TS556CDT?
Request current TS556CDT pricing and lead time through the Request a Quote form on this product page. Because the device is listed as obsolete, lead time and supply status can vary with available inventory and the requested quantity, package suffix, date code, and inspection level. Include a target date and acceptable alternative quantity in the request so procurement can respond with the most relevant sourcing path.
Is TS556CDT in stock?
TS556CDT stock status should be confirmed through the Request a Quote form on this product page because the manufacturer lists the component as obsolete. Existing inventory may be limited, fragmented, or available only in selected date codes and quantities. Provide your required quantity and acceptable traceability criteria with the request. Do not base a production schedule on a general listing because obsolete-part availability can change without notice.
What can replace TS556CDT?
The TS556CD and TS556IDT are the closest same-family replacement candidates identified for the TS556CDT. They use the same dual 555 timer architecture and 14-SOIC package format, but the correct ordering suffix and temperature grade must be confirmed before installation. Cross-brand replacements are not presented as drop-in choices without verified package, pinout, voltage, timing, and output-stage details.
What are the common TS556CDT design pitfalls?
The main TS556CDT design pitfalls are inaccurate timing-component tolerances, excessive timing-node noise, inadequate supply bypassing, and exceeding the discharge transistor's current capability. The manufacturer specifies a maximum astable frequency of 2.7 MHz, so high-frequency layouts require short timing paths and careful control of parasitic capacitance. For timing accuracy, use stable resistor and capacitor temperature coefficients and avoid routing the timing node beside switching-current traces.

Technische Referenzdaten für TS556CDT – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the TS556CDT when a commercial-temperature design requires two independent CMOS 555-type timer channels, a maximum astable frequency of 2.7 MHz, and operation from 2 V to 16 V in a 14-SOIC package. Select TS556CD when its exact ordering suffix and temperature grade satisfy the board requirements and the PCB footprint matches. Consider TS556IDT when the system needs the broader temperature capability associated with that ordering variant, after checking its full electrical limits. TS556ID is another same-family option worth reviewing when its suffix and marking are suitable. None of these alternatives should be chosen solely from the family name: verify pin assignments, trigger polarity, output behavior, timing equations, and discharge-current demand. The TS556CDT is listed as obsolete, so lifecycle planning and traceable sourcing are as important as electrical equivalence when building or repairing a system.

Vergleich mit Alternativen

Parameter Dieses Produkt TS556CD TS556IDT TS556ID
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Timer Architecture Dual CMOS 555-type timer Dual CMOS 555-type timer Dual CMOS 555-type timer Dual CMOS 555-type timer
Maximum Astable Frequency 2.7 MHz 2.7 MHz 2.7 MHz 2.7 MHz
Supply Voltage Range 2 V to 16 V 2 V to 16 V 2 V to 16 V 2 V to 16 V
Operating Modes Monostable and astable Monostable and astable Monostable and astable Monostable and astable
Pin Compatibility Compatible with bipolar NE556 NE556-compatible family NE556-compatible family NE556-compatible family
Number of Timer Channels 2 channels 2 channels 2 channels 2 channels

Wichtigste Unterscheidungsmerkmale

  • Two independent timer sections in one package (vs. TS556CD)
  • Documented commercial operating range (vs. TS556IDT)
  • Established NE556-compatible architecture (vs. TS556ID)

Designhinweise

Calculate timing accuracy from the actual resistor and capacitor tolerances rather than nominal values. Both monostable pulse width and astable period are sensitive to component variation, IC propagation delay, temperature, and capacitor leakage. Use stable components with known temperature coefficients when repeatability matters. At frequencies approaching the 2.7 MHz maximum, minimize PCB capacitance around the timing node and verify the selected RC combination against the manufacturer timing equations.

Place the timing resistor and capacitor close to their associated TS556CDT pins, and route the timing node as a short, quiet trace. Keep this node away from switching-regulator outputs, relay-driver nodes, and high-current return paths. Provide local supply bypass routing between the device's supply and ground pins, with a short ground return. These layout practices reduce supply ripple, radiated coupling, and sensitivity to PCB parasitic capacitance.

Check the discharge-transistor current produced by the timing resistor before finalizing each channel. The pulse current must remain within the device's applicable limit, while excessive resistance can lengthen timing error and excessive capacitance can increase startup and discharge time. In low-power systems, include the typical IC supply currents of 180 µA at 3 V and 220 µA at 5 V, timing-capacitor leakage, and output-load current in the complete energy budget.

Do not substitute the TS556CDT into every NE556 circuit without reviewing the original timing and output requirements. Verify supply limits, trigger polarity, output pulse shape, maximum frequency, and the current driven by the discharge path. Although the manufacturer describes NE556 pin and functional compatibility, differences in output behavior, leakage, and timing tolerance can matter in precision or high-current legacy designs.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the referenced manufacturer and distributor materials. AEC-Q100 is not applicable because the TS556CDT is a general-purpose clock and timing IC rather than an automotive-qualified device.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

TS556CDT datasheet TS556CDT pinout TS556CDT datasheet pdf TS556CDT equivalent TS556CDT replacement TS556CDT cross reference TS556CDT footprint TS556CDT price TS556CDT stock STMicroelectronics TS556CDT TS556CDT vs TS556IDT TS556CDT 14-SOIC pinout TS556CDT astable application circuit dual CMOS 555 timer 2.7MHz

Verwandte Bauteile & Begriffe

STMicroelectronics TS556CDT TS556CD TS556IDT TS556ID 555 timer dual timer clock and timing IC programmable timer oscillator monostable multivibrator astable multivibrator CMOS NE556 14-SOIC surface mount SMD 2.7 MHz 2 V to 16 V supply current timing resistor timing capacitor pulse generation industrial control
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen