TS556CDT - Dual 2.7MHz Timer IC | STMicroelectronics
Référence : TS556CDT ✗ Fin de vieTS556CDT Présentation
A 555-type timer is a clock-and-timing integrated circuit that compares an externally controlled timing voltage with a reference threshold and switches an output when the voltage crosses that threshold. In the monostable configuration, one external resistor and capacitor determine a single output pulse. In the astable configuration, two resistors and a capacitor establish continuous oscillation. The TS556 family belongs to the broader semiconductor hierarchy of clock and timing ICs, timer ICs, programmable timers, and oscillators.
The TS556CDT provides a maximum astable operating frequency of 2.7 MHz and operates from 2 V to 16 V. Its low power consumption is a notable characteristic: the manufacturer datasheet lists a typical supply current of 220 µA at 5 V and 180 µA at 3 V. One distributor technical listing reports 130 µA supply current, demonstrating that the operating-current figure can vary with supply voltage and test conditions. The commercial-temperature TS556CDT is specified for an operating range of 0 °C to 70 °C.
Using CMOS construction allows the TS556CDT to provide the functional behavior of the classic 555 timer in a low-power, dual-channel implementation. Both timer sections can be used independently, which reduces component count when a board requires two related timing functions. Equivalent internal oscillators can produce clocks for digital systems, while independently configured channels can create delayed pulses, retriggerable one-shots, window timers, or simple tone-generating circuits.
Typical applications include industrial control and instrumentation, digital delay networks, pulse-generation circuits, low-power sensor interfaces, tone generation, debounce and delay networks, embedded control systems, and general-purpose clock-generation modules. The 14-pin SOIC package is suitable for conventional surface-mount PCB assembly and allows straightforward hand soldering during prototype development.
When using the TS556CDT, calculate the timing resistor and capacitor tolerances because both directly determine pulse width and oscillation frequency. Keep the timing node away from noisy high-current traces, use a bypass capacitor close to the supply pins, and verify the discharge-transistor peak current against the chosen timing resistor. For battery-powered equipment, compare both operating current and the leakage contribution of the timing capacitors against the complete power budget.
This page combines the core electrical limits, operating-temperature range, package details, pin-compatibility information, application guidance, and selection considerations needed to evaluate the TS556CDT. It also identifies three closely related TS556 family ordering variants and clearly distinguishes their package and temperature-grade verification needs for drop-in replacement planning.
Alternatives de remplacement direct pour TS556CDT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec TS556CDT (même facteur de forme et même empreinte) — différant par Package, Timer Configuration, Operating Modes, Typical Supply Current at 5 V, Supply Current.
TS556CD
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →TS556IDT
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →TS556ID
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →TS556CDT Spécifications
| Timer Type | 555 Type, dual timer/oscillator |
| Number of Timers | 2 channels |
| Maximum Astable Frequency | 2.7 MHz |
| Supply Voltage Range | 2 V to 16 V |
| Courant d'alimentation | 130 µA |
| Typical Supply Current at 5 V | 220 µA |
| Typical Supply Current at 3 V | 180 µA |
| Plage de température de fonctionnement | 0 °C to 70 °C |
| Boîtier | 14-SOIC |
| Package Length | 0.154 inch |
| Type de montage | Surface mount |
| Technology | CMOS |
| Operating Modes | Monostable and astable |
| Bipolar Compatibility | Pin-to-pin and functionally compatible with NE556 |
| Power Consumption | Low power consumption |
| Product Category | Programmable timers and oscillators |
Guide de configuration des broches du TS556CDT 0.154 inch
Configuration des broches du TS556CDT (boîtier 0.154 inch). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour TS556CDT.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
TS556CDT convient pour 6 applications: Dual Precision Delay Generation, Astable Clock and Tone Generation, Industrial Control and Retriggerable Timing, Low-Power Sensor Interface Timing, Pulse-Shaping and Modulation, Digital Boards and Embedded Control.
Dual Precision Delay Generation
The TS556CDT is useful when one board requires two independent delay functions without allocating separate single-timer packages. Its two CMOS timer sections can each be configured for monostable operation with an external timing resistor and capacitor, allowing trigger-to-output delays to be established separately. The manufacturer specifies a 2 V to 16 V supply range, a maximum astable frequency of 2.7 MHz, and compatibility with bipolar NE556 behavior. Designers should verify timing accuracy against the tolerance and temperature coefficient of the selected R-C network. For low-power equipment, the listed typical currents of 180 µA at 3 V and 220 µA at 5 V provide a useful starting point, although capacitor leakage and downstream loads must also be included in the power budget.
Recommandé
Astable Clock and Tone Generation
Astable operation makes the TS556CDT suitable for generating a continuous low-frequency clock, audible tone, or modulation waveform. Each channel has its own timing network, so one section can generate a clock while the other produces a related tone or repetition pulse. The manufacturer datasheet identifies 2.7 MHz as the maximum astable frequency, giving designers a clear ceiling when calculating resistance, capacitance, and propagation delays. At low frequencies, capacitor leakage and input bias effects can materially shift the period, so stable film or low-leakage components are preferable. At higher frequencies, keep the timing node compact and isolated from switching nodes. The TS556's 2 V to 16 V operating range also permits use in both low-voltage portable systems and higher-voltage industrial control boards.
Recommandé
Industrial Control and Retriggerable Timing
The TS556CDT can implement retriggerable pulse-duration control, watchdog-style delay logic, and event-capture functions in industrial control equipment. Monostable operation allows an external event to initiate a defined output interval, while the independent second channel can monitor another event or provide a complementary timing sequence. Its 14-SOIC package is convenient for conventional surface-mount assembly, while the documented NE556 compatibility simplifies comparison with earlier bipolar timer designs. The TS556CDT's commercial temperature range is 0 °C to 70 °C, so it is appropriate for controlled indoor equipment rather than exposed or extended-temperature installations. Engineers should check timing tolerance, output rise and fall behavior, and supply current before finalizing the control-loop timing budget.
Recommandé
Low-Power Sensor Interface Timing
Battery-powered sensor interfaces can use the TS556CDT to establish measurement windows, debounce mechanical inputs, or generate periodic sampling triggers. The two timer sections reduce the need for multiple timer chips when a sensor requires both a short debounce interval and a longer acquisition delay. Typical supply-current figures of 180 µA at 3 V and 220 µA at 5 V establish the IC's basic consumption, but the complete system also depends on the timing capacitors' leakage and the frequency of timer activity. For duty-cycled designs, periodic wake-up behavior should be compared against the sensor's own idle current. Keep the timing node away from high-impedance sensor lines, provide local supply decoupling, and account for component tolerances when defining the acceptable sampling or debounce window.
Recommandé
Pulse-Shaping and Modulation
The TS556CDT is appropriate for pulse shaping, burst generation, simple modulation, and repetitive trigger conditioning. One timer channel can generate a continuous astable waveform while the other shapes, gates, or delays that waveform in monostable mode. Its maximum astable frequency of 2.7 MHz provides flexibility from low-rate timing through substantially higher pulse rates, although output-drive and load limits must be checked for each timing network. The CMOS implementation and documented NE556 compatibility make it a logical successor to a bipolar dual timer when preserving the existing PCB footprint and behavior is important. For RF-adjacent or high-speed digital circuits, use short timing traces, a grounded return path, and local bypass capacitance to prevent supply or timing-node noise from degrading pulse edges.
Recommandé
Digital Boards and Embedded Control
The TS556CDT can support legacy digital boards that retain discrete 555 timing functions during a redesign. Its two channels may replace separate monostable or astable circuits, while the 14-SOIC package simplifies PCB rework and prototype assembly. For embedded systems, the timer can produce a periodic service interval, delay a control action, or shape a reset-like pulse without occupying a microcontroller timer channel. Because the TS556CDT is specified for 0 °C to 70 °C, its use should remain within commercial environmental conditions. Validate the original circuit's trigger polarity, output pulse shape, and discharge-current demand before substituting the CMOS timer for a bipolar NE556. If timing accuracy dominates the design, quantify resistor and capacitor tolerance rather than relying on nominal frequency calculations alone.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TS556CDT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TS556CD | TS556IDT | TS556ID |
|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Timer Architecture | Dual CMOS 555-type timer | Dual CMOS 555-type timer | Dual CMOS 555-type timer | Dual CMOS 555-type timer |
| Maximum Astable Frequency | 2.7 MHz | 2.7 MHz | 2.7 MHz | 2.7 MHz |
| Supply Voltage Range | 2 V to 16 V | 2 V to 16 V | 2 V to 16 V | 2 V to 16 V |
| Operating Modes | Monostable and astable | Monostable and astable | Monostable and astable | Monostable and astable |
| Pin Compatibility | Compatible with bipolar NE556 | NE556-compatible family | NE556-compatible family | NE556-compatible family |
| Number of Timer Channels | 2 channels | 2 channels | 2 channels | 2 channels |
Principaux différenciateurs
- Two independent timer sections in one package (vs TS556CD)
- Documented commercial operating range (vs TS556IDT)
- Established NE556-compatible architecture (vs TS556ID)
Notes de conception
Calculate timing accuracy from the actual resistor and capacitor tolerances rather than nominal values. Both monostable pulse width and astable period are sensitive to component variation, IC propagation delay, temperature, and capacitor leakage. Use stable components with known temperature coefficients when repeatability matters. At frequencies approaching the 2.7 MHz maximum, minimize PCB capacitance around the timing node and verify the selected RC combination against the manufacturer timing equations.
Place the timing resistor and capacitor close to their associated TS556CDT pins, and route the timing node as a short, quiet trace. Keep this node away from switching-regulator outputs, relay-driver nodes, and high-current return paths. Provide local supply bypass routing between the device's supply and ground pins, with a short ground return. These layout practices reduce supply ripple, radiated coupling, and sensitivity to PCB parasitic capacitance.
Check the discharge-transistor current produced by the timing resistor before finalizing each channel. The pulse current must remain within the device's applicable limit, while excessive resistance can lengthen timing error and excessive capacitance can increase startup and discharge time. In low-power systems, include the typical IC supply currents of 180 µA at 3 V and 220 µA at 5 V, timing-capacitor leakage, and output-load current in the complete energy budget.
Do not substitute the TS556CDT into every NE556 circuit without reviewing the original timing and output requirements. Verify supply limits, trigger polarity, output pulse shape, maximum frequency, and the current driven by the discharge path. Although the manufacturer describes NE556 pin and functional compatibility, differences in output behavior, leakage, and timing tolerance can matter in precision or high-current legacy designs.
Informations de conformité
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the referenced manufacturer and distributor materials. AEC-Q100 is not applicable because the TS556CDT is a general-purpose clock and timing IC rather than an automotive-qualified device.