STMicroelectronics

TS944BID - Quad R-R Op Amp, 14-SO | STMicroelectronics

Teilenummer: TS944BID ✗ Abgekündigt
14-SO, 3.90 mm nominal body width Package
MOQ: 1 |

TS944BID Übersicht

The STMicroelectronics TS944BID is a four-circuit, rail-to-rail micropower operational amplifier in a 14-pin SO package. It combines four general-purpose amplifier channels with output swing that reaches the supply rails, while a related TS944BIDT ordering code is identified as a 10 kHz, 14-SO device. The 14-SO outline gives the TS944BID a compact surface-mount footprint suitable for multi-channel analog signal conditioning, instrumentation, sensor interfaces, and low-power embedded systems.

An operational amplifier, or op amp, is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. A rail-to-rail output amplifier can swing its output close to the positive and negative supply limits, increasing usable output range in single-supply systems. The TS944BID therefore belongs to the operational-amplifier hierarchy within analog ICs and general-purpose amplifier ICs, where four matched channels can reduce package count in designs requiring several signal paths.

The principal feature of the TS944BID is its four-channel integration. Each channel provides rail-to-rail output capability, making the device applicable to buffering, gain stages, voltage comparison, and low-frequency analog conditioning. The related TS944BIDT listing identifies the family at 10 kHz gain-bandwidth product, which positions it for low-frequency signal paths rather than high-speed data acquisition. Rail-to-rail operation can also simplify interfacing with ADC inputs when the signal source occupies a large portion of the available supply range.

TS944BID combines four amplifiers in one 14-SO package, reducing the number of discrete amplifier packages required for quad-channel analog circuits. Its micropower classification emphasizes low-power operation, although exact supply current, input offset voltage, noise density, and common-mode limits must be checked in the manufacturer datasheet before a production design is released. Component designers should also confirm the exact ordering-code temperature range and shipping format when placing a regulated bill of materials.

Typical uses include current sensing around an instrumentation amplifier, sensor signal conditioning in industrial systems, buffered ADC inputs, low-level audio preamplification, and portable measurement equipment. Four channels are particularly useful when transducers, filters, or data-conversion inputs require consistent amplifier topology. The 14-SO package also allows the device to be placed alongside a microcontroller, analog-to-digital converter, or digital interface IC on a compact circuit board.

Designers should verify the input common-mode range, output load capability, stability with the selected feedback network, and decoupling requirements against the STMicroelectronics datasheet. Place the bypass capacitor close to the supply pins and use the pin-description table when assigning PCB nets. Because TS944BID is marked obsolete, new production designs should confirm lifecycle status and consider an actively supported amplifier for new releases.

This product record combines package and functional identification with lifecycle, compliance, sourcing, replacement, and application guidance. It also distinguishes the exact TS944BID ordering code from TS944BIDT and explains where engineers should verify electrical limits, mechanical details, and approved alternatives before committing a design to production.

Drop-in-Alternativen für TS944BID – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

TS944BIDT

✅ Drop-In
📦 14-SO
The TS944BIDT differs only by its ordering suffix in the available description: both devices are 4-channel, rail-to-rail, 10 kHz amplifiers in the 14-SO package, with 0% difference in the listed key parameters.

📋 Referenzalternative (nicht im Katalog)

TS944BID Grenzwerte & elektrische Eigenschaften

Number of Amplifier Channels 4 circuits
Product Type General-purpose operational amplifier
Output Architecture Rail-to-rail output
Power Classification Micropower operational amplifier
Related Family Gain-Bandwidth Product 10 kHz
Gehäuse 14-SO, 3.90 mm nominal body width
Montageart Surface mount
Anzahl der Pins 14 pins
Lebenszyklusstatus Obsolete
RoHS-Status Compliant

TS944BID 14-so, 3.90 mm nominal body width Pinbelegungsleitfaden

Pinbelegung für TS944BID (14-so, 3.90 mm nominal body width-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für TS944BID im 14-so, 3.90 mm nominal body width-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TS944BID.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TS944BID ist geeignet für 6 Anwendungs: Multichannel Sensor Conditioning, Buffered ADC Interface, Portable Measurement Instrument, Low-Level Audio Preamplification, Current-Sense Amplification, Industrial Control Signal Conditioning.

🏭

Multichannel Sensor Conditioning

The TS944BID fits multichannel sensor conditioning because it combines four rail-to-rail amplifier channels in one 14-SO package. A related family description identifies a 10 kHz gain-bandwidth product, making it appropriate for many temperature, pressure, and slow-changing process signals rather than wideband waveform systems. Each channel can buffer a sensor or amplify a small differential signal before conversion by an ADC. The quad arrangement reduces package count and keeps four similar amplifier paths physically close to the sensor connectors. Before committing the circuit, verify sensor output impedance, input common-mode limits, offset, noise, and the exact bandwidth of the TS944BID ordering code in the STMicroelectronics datasheet.

📟

Buffered ADC Interface

The TS944BID is useful for conditioning several low-speed analog inputs before an ADC, particularly when a single-supply system needs output swing near the practical operating limits of the available voltage range. Four rail-to-rail channels can buffer or amplify four sensor lines while conserving board area. The family listing's 10 kHz bandwidth is suitable for many multiplexed data-acquisition systems, but acquisition time and settling must be checked against the ADC and sampling rate. Confirm output drive, capacitive-load stability, supply voltage, and allowable input common-mode range in the manufacturer datasheet, then place the bypass capacitor close to the amplifier supply pins.

📱

Portable Measurement Instrument

The TS944BID's four-channel micropower-oriented architecture can support portable measurement equipment in which several low-bandwidth analog signals must be amplified while minimizing board area. The 14-SO package is practical for space-constrained handheld and field instruments, and rail-to-rail outputs help preserve signal range in low-voltage systems. A 10 kHz family gain-bandwidth value is appropriate for temperature, pressure, and slow-motion measurements. However, obsolete lifecycle status makes it unsuitable for a new design unless availability and long-term supply are explicitly arranged. Validate current consumption, noise performance, offset, and operating-temperature requirements against the exact manufacturer documentation.

🎧

Low-Level Audio Preamplification

The TS944BID can serve as a low-level audio preamplifier in compact analog signal paths because it provides four rail-to-rail amplifier channels and a 10 kHz-related family bandwidth suitable for many human-audio-band applications. Multiple channels can support stereo and auxiliary monitoring paths within one 14-SO package. Rail-to-rail output helps maintain usable swing in a single-supply design, while the quad configuration simplifies repeated gain-network construction. Audio performance depends on the actual noise and distortion figures, so check those characteristics, output-load capability, and input bias behavior in the manufacturer datasheet. Decoupling and grounding are equally important for preventing supply ripple or channel-to-channel interference.

⚡

Current-Sense Amplification

The TS944BID can amplify the output of a current-shunt or current-sense front end when the required bandwidth remains within the 10 kHz-related family bandwidth. Four channels support simultaneous monitoring of multiple low-frequency current paths, such as power rails, actuator loads, or industrial transducers. Rail-to-rail output allows the conditioned signal to occupy more of the available supply range, and the 14-SO package keeps the analog front end compact. The amplifier must still satisfy the shunt signal's common-mode range, offset, gain error, noise, and output-current requirements. Verify those limits in the STMicroelectronics datasheet and account for Kelvin routing and ground-current errors in the high-current path.

🏭

Industrial Control Signal Conditioning

The TS944BID is suitable for industrial control modules that require several buffered or amplified low-frequency control signals. Its four-channel configuration can condition outputs from sensors, transducers, or DACs before they enter a controller or communications interface, while rail-to-rail operation supports compact single-supply designs. The 14-SO surface-mount package supports conventional PCB assembly and reduces the footprint associated with four separate amplifiers. Because the device is obsolete, engineers should treat it as a legacy-support option rather than a default choice for new industrial platforms. Confirm lifecycle status, temperature grade, noise, stability, and supply limits in the manufacturer documentation before design release.

What is the TS944BID?
The TS944BID is an STMicroelectronics four-channel, general-purpose operational amplifier with rail-to-rail output and a micropower design. According to the STMicroelectronics product description and distributor catalog records, it is packaged in a 14-SO surface-mount outline. Four integrated amplifier channels can replace four separate single-channel packages in low-frequency signal-conditioning designs.
How many operational amplifiers are integrated in the TS944BID?
The TS944BID integrates four operational-amplifier channels in one 14-SO package. The manufacturer and distributor documentation identify it as a four-circuit, rail-to-rail amplifier. This quad configuration is useful for differential-to-single-ended conversion, multichannel sensor buffering, ADC interface conditioning, and other designs that require four similar low-frequency amplifier stages.
What is the TS944BID package and pin count?
The TS944BID uses a 14-SO surface-mount package with 14 pins. The distributor specification identifies the package as 14-SO, and the corresponding package-library designation is SOIC-14. Before assigning PCB nets, use the pin-description table in the STMicroelectronics datasheet to confirm power, input, output, and offset-null connections.
Is the TS944BID rail-to-rail?
Yes, the TS944BID provides rail-to-rail output operation. STMicroelectronics describes the device as an output rail-to-rail micropower operational amplifier. Rail-to-rail output is useful in low-voltage systems because the amplifier can use a larger portion of the supply range, but the usable swing still depends on the load, supply voltage, and output-current conditions specified by the manufacturer.
What is the gain-bandwidth product of the TS944BID family?
A related ordering record for TS944BIDT identifies the TS944 family at a 10 kHz gain-bandwidth product. The exact TS944BID ordering code should be checked in the manufacturer datasheet before relying on that value for a regulated design. A 10 kHz bandwidth positions the family for low-frequency analog signal paths rather than wideband video or high-speed communications.
Where can I download the TS944BID datasheet PDF?
The TS944BID datasheet PDF can be reached through the linked STMicroelectronics document mirror or the manufacturer product documentation. According to the document listing, the PDF contains the electrical characteristics, pin description, package information, and application details. Use the pin-description and recommended-layout sections when creating or reviewing a PCB footprint.
Where can I find the TS944BID pinout?
The TS944BID pinout is identified by the manufacturer pin-description table for the 14-SO package. The available catalog records establish the 14-pin outline but do not reproduce every terminal name, so consult the datasheet diagram before routing the board. Pay particular attention to supply pins, each amplifier's input and output pins, and any offset-null or inter-amplifier terminals.
What can replace the TS944BID?
No fully documented cross-brand drop-in replacement is established for the TS944BID in the available cross-reference information. TS944BIDT is the closest identified ordering option because it is also described as a four-channel, rail-to-rail, 10 kHz device in a 14-SO package, but temperature and shipment codes must be checked. Submit the required parameters through the Request a Quote form for sourcing review.
Is the TS944BIDT the same as the TS944BID?
TS944BIDT is a distinct STMicroelectronics ordering code associated with the same four-channel, rail-to-rail, 14-SO amplifier family. The available distributor description associates TS944BIDT with a 10 kHz gain-bandwidth product. Because suffix codes can encode temperature grade and shipment format, compare the manufacturer ordering information before treating it as an unqualified substitution.
TS944BID vs TS944BIDT - which should I choose?
Choose the exact TS944BID when its documented temperature grade, lifecycle expectation, and package suffix match the production requirement. Consider TS944BIDT only after confirming that its ordering-code attributes, electrical ratings, and availability meet the design. Both are identified as four-channel rail-to-rail devices in the 14-SO family, but a shared package description alone does not prove identical qualification or lifecycle status.
When should I choose the TS944BID over a single-channel op amp?
Choose the TS944BID when the design needs four similar low-frequency amplifier channels and can benefit from one package instead of four single-channel packages. Its rail-to-rail output can simplify buffering within a restricted supply range. If the design requires very low offset, very low noise, high speed, rail-to-rail input, or an actively supported lifecycle, select a device whose individual specifications satisfy those requirements.
Is the TS944BID suitable for sensor signal conditioning?
The TS944BID is suitable for many low-frequency sensor-conditioning tasks because it provides four rail-to-rail amplifier channels in one package. A related family record identifies a 10 kHz gain-bandwidth product, which is appropriate for many temperature, pressure, and slow-motion sensor signals. Verify sensor impedance, common-mode range, noise, offset, and bandwidth in the manufacturer datasheet before finalizing the gain network.
Can the TS944BID drive an ADC input?
The TS944BID can provide an ADC buffer or gain stage when the ADC input, bandwidth, and settling requirements are compatible with the amplifier. Its four channels allow several conversion inputs to be conditioned consistently, while rail-to-rail output helps utilize the available signal range. Confirm acquisition time, output drive, capacitive-load stability, and supply limits in the manufacturer datasheet.
Is the TS944BID still active?
The TS944BID is marked obsolete in current catalog information. STMicroelectronics previously offered it as a four-circuit, rail-to-rail, 14-SO operational amplifier, but it should not be assumed suitable for a new production release without lifecycle confirmation. Request current sourcing and lot information through the Request a Quote form, and consider an actively supported amplifier for new designs.
Is the TS944BID RoHS compliant?
The TS944BID is listed as RoHS compliant. That declaration applies to the component's restriction of hazardous substances status, not to every assembly or shipment containing the device. For new programs, obtain current manufacturer compliance documentation, confirm the exact ordering code, and verify any additional halogen-free, REACH, or conflict-minerals requirements through the Request a Quote process.

Technische Referenzdaten für TS944BID – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the TS944BID for a legacy design that specifically specifies this ordering code, particularly when four low-frequency, rail-to-rail amplifier channels are required in a 14-SO package. Consider TS944BIDT when the manufacturer ordering table confirms equivalent electrical ratings, temperature grade, and packaging requirements, because the available catalog descriptions identify the same four-channel, rail-to-rail, 10 kHz architecture. Neither choice should be made solely from package similarity: check supply range, common-mode range, offset, noise, output drive, stability, and lifecycle status. For a new design, favor an actively supported quad amplifier unless obsolescence and long-term sourcing have been formally accepted. A cross-brand substitute should not be selected without a documented pin-to-pin comparison and review of every electrical limit that affects the signal path.

Vergleich mit Alternativen

Parameter Dieses Produkt TS944BIDT
Brand STMicroelectronics STMicroelectronics
Package 14-SO 14-SO
Number of Amplifier Channels 4 circuits 4 circuits
Output Architecture Rail-to-rail output Rail-to-rail output
Related Family Gain-Bandwidth Product 10 kHz 10 kHz
Product Type General-purpose operational amplifier General-purpose operational amplifier
Mounting Type Surface mount Surface mount

Wichtigste Unterscheidungsmerkmale

  • Four-channel integration (vs. TS944BIDT)
  • Rail-to-rail output architecture (vs. TS944BIDT)
  • Compact multi-channel footprint (vs. TS944BIDT)

Designhinweise

Route the four amplifier channels according to the manufacturer pin-description table and keep input traces away from supply paths and digital switching nodes. Place the supply bypass capacitor close to the amplifier's supply pins, with its ground return connected to a low-impedance ground plane. For precision measurements, use a quiet analog ground and avoid routing high-current shunt returns through the input-reference path.

Do not treat rail-to-rail output as a guarantee that the output can reach either supply rail under every load. Check the datasheet's output-voltage headroom, load current, temperature, and supply limits, and preserve the required operating region for downstream ADC or controller inputs. Also confirm the exact TS944BID temperature grade and ordering suffix before releasing a regulated bill of materials.

Estimated: amplifier dissipation equals input-to-output voltage difference multiplied by output current plus the internal supply contribution. For example, at 5 V input, 2.5 V output, and 1 mA load, the estimated load-related dissipation is 2.5 mW before internal losses. Validate actual current, junction temperature, and package thermal limits against the manufacturer specifications, especially when driving lower-impedance loads.

Use short feedback paths and avoid long traces around high-impedance inputs. A low-value feedback network can improve noise performance but may increase capacitive-load sensitivity and reduce output-current headroom. Evaluate amplifier stability with the intended source impedance, load, cable capacitance, and PCB parasitics, particularly on the 10 kHz-related TS944 family bandwidth.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

RoHS compliance is stated in the component catalog record. REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for the exact ordering code. The device is a general-purpose operational amplifier and is not presented as an AEC-Q100 automotive-qualified variant.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

TS944BID datasheet TS944BID datasheet pdf TS944BID pinout TS944BID specifications TS944BID 14-SO package TS944BID rail-to-rail op amp TS944BID replacement TS944BID equivalent TS944BID vs TS944BIDT STMicroelectronics TS944BID TS944BID price TS944BID stock

Verwandte Bauteile & Begriffe

STMicroelectronics TS944BID TS944BIDT operational amplifier op amp quad operational amplifier four-circuit amplifier rail-to-rail output amplifier micropower amplifier analog IC general-purpose amplifier IC 14-SO package SOIC-14 surface mount signal conditioning ADC interface current sensing 10 kHz gain-bandwidth product RoHS obsolete lifecycle status
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen