TS944BID - Quad R-R Op Amp, 14-SO | STMicroelectronics
MPN: TS944BID ✗ Akhir HayatTS944BID Ringkasan
An operational amplifier, or op amp, is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. A rail-to-rail output amplifier can swing its output close to the positive and negative supply limits, increasing usable output range in single-supply systems. The TS944BID therefore belongs to the operational-amplifier hierarchy within analog ICs and general-purpose amplifier ICs, where four matched channels can reduce package count in designs requiring several signal paths.
The principal feature of the TS944BID is its four-channel integration. Each channel provides rail-to-rail output capability, making the device applicable to buffering, gain stages, voltage comparison, and low-frequency analog conditioning. The related TS944BIDT listing identifies the family at 10 kHz gain-bandwidth product, which positions it for low-frequency signal paths rather than high-speed data acquisition. Rail-to-rail operation can also simplify interfacing with ADC inputs when the signal source occupies a large portion of the available supply range.
TS944BID combines four amplifiers in one 14-SO package, reducing the number of discrete amplifier packages required for quad-channel analog circuits. Its micropower classification emphasizes low-power operation, although exact supply current, input offset voltage, noise density, and common-mode limits must be checked in the manufacturer datasheet before a production design is released. Component designers should also confirm the exact ordering-code temperature range and shipping format when placing a regulated bill of materials.
Typical uses include current sensing around an instrumentation amplifier, sensor signal conditioning in industrial systems, buffered ADC inputs, low-level audio preamplification, and portable measurement equipment. Four channels are particularly useful when transducers, filters, or data-conversion inputs require consistent amplifier topology. The 14-SO package also allows the device to be placed alongside a microcontroller, analog-to-digital converter, or digital interface IC on a compact circuit board.
Designers should verify the input common-mode range, output load capability, stability with the selected feedback network, and decoupling requirements against the STMicroelectronics datasheet. Place the bypass capacitor close to the supply pins and use the pin-description table when assigning PCB nets. Because TS944BID is marked obsolete, new production designs should confirm lifecycle status and consider an actively supported amplifier for new releases.
This product record combines package and functional identification with lifecycle, compliance, sourcing, replacement, and application guidance. It also distinguishes the exact TS944BID ordering code from TS944BIDT and explains where engineers should verify electrical limits, mechanical details, and approved alternatives before committing a design to production.
Pilihan pengganti yang segera untuk TS944BID — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
TS944BIDT
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TS944BID Penilaian maksimum & Ciri-ciri Elektrik
| Number of Amplifier Channels | 4 circuits |
| Product Type | General-purpose operational amplifier |
| Output Architecture | Rail-to-rail output |
| Power Classification | Micropower operational amplifier |
| Related Family Gain-Bandwidth Product | 10 kHz |
| Kemasan | 14-SO, 3.90 mm nominal body width |
| Jenis Pemasangan | Surface mount |
| Bilangan Pin | 14 pins |
| Status Lingkungan Hidup | Obsolete |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin TS944BID 14-so, 3.90 mm nominal body width
Konfigurasi pin untuk TS944BID (14-so, 3.90 mm nominal body width pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk TS944BID.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
TS944BID patut untuk 6 aplikasis: Multichannel Sensor Conditioning, Buffered ADC Interface, Portable Measurement Instrument, Low-Level Audio Preamplification, Current-Sense Amplification, Industrial Control Signal Conditioning.
Multichannel Sensor Conditioning
The TS944BID fits multichannel sensor conditioning because it combines four rail-to-rail amplifier channels in one 14-SO package. A related family description identifies a 10 kHz gain-bandwidth product, making it appropriate for many temperature, pressure, and slow-changing process signals rather than wideband waveform systems. Each channel can buffer a sensor or amplify a small differential signal before conversion by an ADC. The quad arrangement reduces package count and keeps four similar amplifier paths physically close to the sensor connectors. Before committing the circuit, verify sensor output impedance, input common-mode limits, offset, noise, and the exact bandwidth of the TS944BID ordering code in the STMicroelectronics datasheet.
Disebarkan
Buffered ADC Interface
The TS944BID is useful for conditioning several low-speed analog inputs before an ADC, particularly when a single-supply system needs output swing near the practical operating limits of the available voltage range. Four rail-to-rail channels can buffer or amplify four sensor lines while conserving board area. The family listing's 10 kHz bandwidth is suitable for many multiplexed data-acquisition systems, but acquisition time and settling must be checked against the ADC and sampling rate. Confirm output drive, capacitive-load stability, supply voltage, and allowable input common-mode range in the manufacturer datasheet, then place the bypass capacitor close to the amplifier supply pins.
Disebarkan
Portable Measurement Instrument
The TS944BID's four-channel micropower-oriented architecture can support portable measurement equipment in which several low-bandwidth analog signals must be amplified while minimizing board area. The 14-SO package is practical for space-constrained handheld and field instruments, and rail-to-rail outputs help preserve signal range in low-voltage systems. A 10 kHz family gain-bandwidth value is appropriate for temperature, pressure, and slow-motion measurements. However, obsolete lifecycle status makes it unsuitable for a new design unless availability and long-term supply are explicitly arranged. Validate current consumption, noise performance, offset, and operating-temperature requirements against the exact manufacturer documentation.
Disebarkan
Low-Level Audio Preamplification
The TS944BID can serve as a low-level audio preamplifier in compact analog signal paths because it provides four rail-to-rail amplifier channels and a 10 kHz-related family bandwidth suitable for many human-audio-band applications. Multiple channels can support stereo and auxiliary monitoring paths within one 14-SO package. Rail-to-rail output helps maintain usable swing in a single-supply design, while the quad configuration simplifies repeated gain-network construction. Audio performance depends on the actual noise and distortion figures, so check those characteristics, output-load capability, and input bias behavior in the manufacturer datasheet. Decoupling and grounding are equally important for preventing supply ripple or channel-to-channel interference.
Disebarkan
Current-Sense Amplification
The TS944BID can amplify the output of a current-shunt or current-sense front end when the required bandwidth remains within the 10 kHz-related family bandwidth. Four channels support simultaneous monitoring of multiple low-frequency current paths, such as power rails, actuator loads, or industrial transducers. Rail-to-rail output allows the conditioned signal to occupy more of the available supply range, and the 14-SO package keeps the analog front end compact. The amplifier must still satisfy the shunt signal's common-mode range, offset, gain error, noise, and output-current requirements. Verify those limits in the STMicroelectronics datasheet and account for Kelvin routing and ground-current errors in the high-current path.
Disebarkan
Industrial Control Signal Conditioning
The TS944BID is suitable for industrial control modules that require several buffered or amplified low-frequency control signals. Its four-channel configuration can condition outputs from sensors, transducers, or DACs before they enter a controller or communications interface, while rail-to-rail operation supports compact single-supply designs. The 14-SO surface-mount package supports conventional PCB assembly and reduces the footprint associated with four separate amplifiers. Because the device is obsolete, engineers should treat it as a legacy-support option rather than a default choice for new industrial platforms. Confirm lifecycle status, temperature grade, noise, stability, and supply limits in the manufacturer documentation before design release.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk TS944BID — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | TS944BIDT |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 14-SO | 14-SO |
| Number of Amplifier Channels | 4 circuits | 4 circuits |
| Output Architecture | Rail-to-rail output | Rail-to-rail output |
| Related Family Gain-Bandwidth Product | 10 kHz | 10 kHz |
| Product Type | General-purpose operational amplifier | General-purpose operational amplifier |
| Mounting Type | Surface mount | Surface mount |
Penyeberangsung Jelas
- Four-channel integration (vsTS944BIDT)
- Rail-to-rail output architecture (vsTS944BIDT)
- Compact multi-channel footprint (vsTS944BIDT)
Catatan Desain
Route the four amplifier channels according to the manufacturer pin-description table and keep input traces away from supply paths and digital switching nodes. Place the supply bypass capacitor close to the amplifier's supply pins, with its ground return connected to a low-impedance ground plane. For precision measurements, use a quiet analog ground and avoid routing high-current shunt returns through the input-reference path.
Do not treat rail-to-rail output as a guarantee that the output can reach either supply rail under every load. Check the datasheet's output-voltage headroom, load current, temperature, and supply limits, and preserve the required operating region for downstream ADC or controller inputs. Also confirm the exact TS944BID temperature grade and ordering suffix before releasing a regulated bill of materials.
Estimated: amplifier dissipation equals input-to-output voltage difference multiplied by output current plus the internal supply contribution. For example, at 5 V input, 2.5 V output, and 1 mA load, the estimated load-related dissipation is 2.5 mW before internal losses. Validate actual current, junction temperature, and package thermal limits against the manufacturer specifications, especially when driving lower-impedance loads.
Use short feedback paths and avoid long traces around high-impedance inputs. A low-value feedback network can improve noise performance but may increase capacitive-load sensitivity and reduce output-current headroom. Evaluate amplifier stability with the intended source impedance, load, cable capacitance, and PCB parasitics, particularly on the 10 kHz-related TS944 family bandwidth.
Maklumat Kesediaan
RoHS compliance is stated in the component catalog record. REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for the exact ordering code. The device is a general-purpose operational amplifier and is not presented as an AEC-Q100 automotive-qualified variant.