WM8234GEFL/V - 6-Channel 16-Bit 70MSPS AFE | Cirrus Logic
Teilenummer: WM8234GEFL/V ✗ AbgekündigtWM8234GEFL/V Übersicht
An analog front end converts charge or voltage signals from an imaging sensor into digitized image data. In the broader signal-chain hierarchy, the WM8234 belongs to the analog front end and digitizer class, which sits ahead of an image processor or frame grabber. It is designed for scanners, copiers, fax machines, and industrial line-scan systems where multiple sensor outputs must be sampled with consistent timing and high resolution.
The WM8234 provides six analog processing channels, each incorporating reset-level clamping, correlated double sampling or sample-and-hold, programmable gain, automatic gain control, and offset adjustment. Its sensor timing generator accepts slow or fast reference clocks and permits flexible adjustment of the output timing clocks. A 5-bit internal DAC generates reference levels for correlated double sampling of CIS signals or for clamping CCD signals.
The device supports flexible data-output configurations, including LVDS and CMOS interfaces, allowing the digitizer section to connect to a variety of downstream image-processing or data-capture systems. Programmable analog functions help normalize channel gain and offset before digitization, reducing fixed-pattern variation in the resulting image. The 16-bit conversion resolution and six-channel architecture suit imaging systems that require multiple parallel sensor lines rather than a single slow-speed channel.
Typical uses include CCD-based document scanners, contact image sensor modules, color and monochrome copiers, and industrial imaging equipment. The integrated timing generator is particularly useful where sensor clocks must be derived from a common system reference and distributed with controlled phase relationships across multiple channels. The WM8234GEFL/RV ordering code provides the same core electrical function in a different packing arrangement.
When laying out the board, treat the analog inputs, timing outputs, and high-speed data interface as separate constraint groups. Keep sensor traces short, maintain continuous reference planes beneath the analog section, and follow the manufacturer’s recommended decoupling and via-stitching arrangements around the exposed pad. Confirm the selected output interface, reference-voltage configuration, sensor timing mode, and pin mapping in the manufacturer datasheet before releasing a PCB layout.
Drop-in-Alternativen für WM8234GEFL/V – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
WM8234GEFL/RV
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
WM8234GEFL
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
WM8234GEFL/V Grenzwerte & elektrische Eigenschaften
| Product Type | Six-channel analog front end and digitizer |
| Number of Analog Channels | 6 channels |
| Auflösung | 16 bit |
| Maximum Operating Speed | 70 MSPS |
| Maximum Pixel Sample Rate | 23 MSPS per channel |
| Sensor Support | CCD sensors and contact image sensors (CIS) |
| Data Output | LVDS and CMOS |
| Channel Functions | Reset-level clamping, correlated double sampling or sample-and-hold, programmable gain, AGC, and offset adjustment |
| Sensor Timing Generator | Available with slow or fast reference clock input |
| Internal Reference DAC | 5-bit DAC |
| Gehäuse | 56-QFN, 7 x 7 mm |
| Montageart | Surface mount |
| Lebenszyklusstatus | Discontinued |
WM8234GEFL/V 56-qfn, 7 x 7 mm Pinbelegungsleitfaden
Pinbelegung für WM8234GEFL/V (56-qfn, 7 x 7 mm-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für WM8234GEFL/V.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
WM8234GEFL/V ist geeignet für 6 Anwendungs: CCD Document Scanner Imaging, Contact Image Sensor Document Imaging, Photocopier and MFP Optical Engine, Industrial Line-Scan Imaging, Fax Machine Sensor Interface, Legacy Scanner Production and Refurbishment.
CCD Document Scanner Imaging
The WM8234GEFL/V fits CCD scanners that need six parallel, 16-bit sensor channels sampled at as much as 23MSPS per channel. Each channel provides correlated double sampling, programmable gain, AGC, offset adjustment, and reset-level clamping to reduce fixed-pattern differences before digitization. The integrated sensor timing generator accepts a slow or fast reference clock and adjusts output timing for the selected CCD line structure. This integration reduces the external analog-chain count while maintaining consistent clocking across the sensor array. The resulting LVDS or CMOS data can feed a downstream image processor or capture system, provided that interface timing matches the receiving device.
Empfohlen
Contact Image Sensor Document Imaging
The WM8234GEFL/V is appropriate for CIS-based scanners where multiple sensor lines produce parallel analogue outputs requiring consistent sampling and normalization. The device supports correlated double sampling for CIS signals and includes an internal 5-bit DAC for generating the required reference level. Six independently processed channels reduce the need for separate amplifiers and sampling circuits, while programmable gain, AGC, and offset adjustment help preserve usable image contrast as illumination or sensor conditions vary. The 70MSPS capability provides headroom above the stated 23MSPS-per-channel pixel rate, supporting both office-document and production-speed scanning systems.
Empfohlen
Photocopier and MFP Optical Engine
The WM8234GEFL/V suits color and monochrome copier imaging engines that digitize several CCD or CIS outputs in parallel. Six channels with 16-bit resolution support full-line sensor acquisition, while programmable gain and offset adjustment compensate for channel-to-channel variation in the optical path. AGC can stabilize signal amplitude, and the sensor timing generator coordinates line transfer and pixel sampling from a common reference. Designers can select LVDS for high-speed point-to-point transfer or CMOS for a parallel output architecture. The integration of timing, analog conditioning, and digitization helps constrain board area and reduces the synchronization burden on the system controller.
Empfohlen
Industrial Line-Scan Imaging
The WM8234GEFL/V can support industrial line-scan cameras that require multiple synchronised analogue channels and flexible sensor timing. Its clock generator accepts slow or fast references and adjusts the output timing for different sensor transfer sequences, while the six-channel architecture captures parallel detector outputs at pixel rates up to 23MSPS per channel. Programmable gain, offset, AGC, and correlated double sampling help normalize optical signals before conversion. For machine-vision systems, the choice between LVDS and CMOS output depends on cable length, receiver availability, and required clocking topology, so the interface should be selected with the complete camera and processing chain in mind.
Empfohlen
Fax Machine Sensor Interface
The WM8234GEFL/V provides the core signal-processing functions required for a document-transmission sensor front end. Six 16-bit channels allow simultaneous conversion of multiple sensor outputs, while correlated double sampling, gain control, and offset adjustment condition the incoming analogue signals. The timing generator produces coordinated sensor drive clocks from a system reference, reducing the amount of external timing generation required. The WM8234 is discontinued, so this application is primarily relevant to maintenance and refurbishment of installed fax equipment. When qualifying a repair, verify the sensor timing mode, reference level, digital output configuration, and supply sequencing against the original equipment schematics.
Empfohlen
Legacy Scanner Production and Refurbishment
The WM8234GEFL/V remains applicable to production continuation and refurbishment of scanners whose sensor electronics are based on the WM8234 architecture. The six-channel, 16-bit digitizer handles CCD or CIS outputs at up to 23MSPS per channel and provides the timing generation required by those sensors. Its LVDS and CMOS outputs support different downstream receiver arrangements, while integrated gain, AGC, offset, and clamping reduce external conditioning circuitry. Because the product is discontinued, a drop-in replacement should be validated at the board level, including reference levels, clock polarity, data-output mapping, and interface signal integrity rather than by package outline alone.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für WM8234GEFL/V – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | WM8234GEFL/RV | WM8234GEFL |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 56-QFN (7 x 7 mm) | 56-QFN (7 x 7 mm) | 56-QFN (7 x 7 mm) |
| Product Type | 6-Channel analog front end and digitizer | 6-Channel analog front end and digitizer | WM8234 family analog front end |
| Sensor Support | CCD and contact image sensors (CIS) | CCD and contact image sensors (CIS) | CCD and contact image sensors (CIS) |
| Digital Data Output | LVDS and CMOS | LVDS and CMOS | LVDS and CMOS |
Wichtigste Unterscheidungsmerkmale
- Integrated six-channel imaging front end reduces separate conditioning and conversion stages (vs. WM8234GEFL)
- Direct match to the documented WM8234GEFL/RV core architecture (vs. WM8234GEFL/RV)
- Supports both CCD and CIS acquisition with integrated timing generation (vs. WM8234GEFL/RV)
Designhinweise
Route the six analogue sensor inputs as a compact, symmetric group and keep switching circuitry and high-speed data return paths away from these nets. Place input and bypass capacitors at the corresponding device pins using the manufacturer’s reference layout. The QFN exposed pad and its thermal vias should follow the package drawing, while sensor-clock lines should be length-matched where the selected timing mode depends on propagation delay.
Determine the LVDS or CMOS interface configuration before final routing because the two output modes impose different topology, termination, and receiver requirements. For LVDS, follow the manufacturer’s differential-routing guidance and provide the specified termination. For CMOS, maintain a continuous reference plane, control return-current paths, and verify source-synchronous clock skew against the receiving device. Do not interchange the interfaces without checking operating-mode configuration.
Do not treat a shared package outline as proof of interchangeability. Confirm sensor clock polarity, line timing, reference-voltage settings, internal DAC use, data-output mapping, and digital interface configuration against the WM8234 datasheet and the original board schematic. The WM8234GEFL/RV is the closest documented packing alternative; validate the required reel format and production quantities before treating either ordering code as a substitute.
Use separate, stable supply paths for the analogue and digital sections if the device documentation identifies separate supply pins. Place the recommended bypass capacitors directly at the pins, keep the supply return path continuous beneath the device, and avoid sharing high-current return paths with sensitive sensor inputs. Verify the required startup order and enable timing against the manufacturer’s power-sequencing diagrams before connecting a sensor module.
Compliance-Informationen
The official manufacturer product page identifies the WM8234 family as discontinued. RoHS, REACH, halogen-free, lead-free, and conflict-minerals declarations are not stated in the available manufacturer or distributor information and are therefore recorded as unknown.