הודעת רכישה אחרונה: WM8234GEFL/V מתקרב לסוף חיי המוצר. תאריך הזמנה אחרון: צור קשר. צפייה בחלקים חלופיים זמינים →
Cirrus Logic Inc.

WM8234GEFL/V - 6-Channel 16-Bit 70MSPS AFE | Cirrus Logic

MPN: WM8234GEFL/V ✗ סוף ייצור
56-QFN, 7 x 7 mm Package 70 MSPS Speed
כמות הזמנה מינימלית: 1 |

WM8234GEFL/V סקירה

The Cirrus Logic WM8234GEFL/V is a six-channel, 16-bit analog front end and digitizer optimized for CCD and contact image sensor imaging systems. It supports pixel sampling rates up to 23MSPS per channel, operates at up to 70MSPS, and includes sensor timing generation with LVDS and CMOS data outputs. The device is packaged in a 56-QFN 7 x 7 mm surface-mount package.

An analog front end converts charge or voltage signals from an imaging sensor into digitized image data. In the broader signal-chain hierarchy, the WM8234 belongs to the analog front end and digitizer class, which sits ahead of an image processor or frame grabber. It is designed for scanners, copiers, fax machines, and industrial line-scan systems where multiple sensor outputs must be sampled with consistent timing and high resolution.

The WM8234 provides six analog processing channels, each incorporating reset-level clamping, correlated double sampling or sample-and-hold, programmable gain, automatic gain control, and offset adjustment. Its sensor timing generator accepts slow or fast reference clocks and permits flexible adjustment of the output timing clocks. A 5-bit internal DAC generates reference levels for correlated double sampling of CIS signals or for clamping CCD signals.

The device supports flexible data-output configurations, including LVDS and CMOS interfaces, allowing the digitizer section to connect to a variety of downstream image-processing or data-capture systems. Programmable analog functions help normalize channel gain and offset before digitization, reducing fixed-pattern variation in the resulting image. The 16-bit conversion resolution and six-channel architecture suit imaging systems that require multiple parallel sensor lines rather than a single slow-speed channel.

Typical uses include CCD-based document scanners, contact image sensor modules, color and monochrome copiers, and industrial imaging equipment. The integrated timing generator is particularly useful where sensor clocks must be derived from a common system reference and distributed with controlled phase relationships across multiple channels. The WM8234GEFL/RV ordering code provides the same core electrical function in a different packing arrangement.

When laying out the board, treat the analog inputs, timing outputs, and high-speed data interface as separate constraint groups. Keep sensor traces short, maintain continuous reference planes beneath the analog section, and follow the manufacturer’s recommended decoupling and via-stitching arrangements around the exposed pad. Confirm the selected output interface, reference-voltage configuration, sensor timing mode, and pin mapping in the manufacturer datasheet before releasing a PCB layout.

חלופות תחליף ישיר עבור WM8234GEFL/V — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

WM8234GEFL/RV

✅ Drop-In
📦 56-QFN (7 x 7 mm)
Same six-channel, 16-bit, 70MSPS AFE specifications and same 56-QFN 7 x 7 mm package; the documented difference is the packing arrangement, not a change in channel count or conversion speed.

📋 חלופה להתייחסות (לא בקטלוג)

WM8234GEFL

✅ Drop-In
📦 56-QFN (7 x 7 mm)
Same WM8234 family electrical specification and package, with a base ordering code that differs from the /V suffix; packing configuration must be confirmed against the assembled production plan.

📋 חלופה להתייחסות (לא בקטלוג)

WM8234GEFL/V דירוגים מרביים ומאפיינים חשמליים

Product Type Six-channel analog front end and digitizer
Number of Analog Channels 6 channels
רזולוציה 16 bit
Maximum Operating Speed 70 MSPS
Maximum Pixel Sample Rate 23 MSPS per channel
Sensor Support CCD sensors and contact image sensors (CIS)
Data Output LVDS and CMOS
Channel Functions Reset-level clamping, correlated double sampling or sample-and-hold, programmable gain, AGC, and offset adjustment
Sensor Timing Generator Available with slow or fast reference clock input
Internal Reference DAC 5-bit DAC
מארז 56-QFN, 7 x 7 mm
סוג הרכבה Surface mount
סטטוס מחזור חיים Discontinued

מדריך תצורת פינים של WM8234GEFL/V 56-qfn, 7 x 7 mm

תצורת פינים עבור WM8234GEFL/V (מארזת 56-qfn, 7 x 7 mm). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 56-qfn, 7 x 7 mm עבור WM8234GEFL/V

אין נתוני פריסת פינים מפורטים עבור WM8234GEFL/V.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

WM8234GEFL/V מתאים עבור 6 יישוםs: CCD Document Scanner Imaging, Contact Image Sensor Document Imaging, Photocopier and MFP Optical Engine, Industrial Line-Scan Imaging, Fax Machine Sensor Interface, Legacy Scanner Production and Refurbishment.

📄

CCD Document Scanner Imaging

The WM8234GEFL/V fits CCD scanners that need six parallel, 16-bit sensor channels sampled at as much as 23MSPS per channel. Each channel provides correlated double sampling, programmable gain, AGC, offset adjustment, and reset-level clamping to reduce fixed-pattern differences before digitization. The integrated sensor timing generator accepts a slow or fast reference clock and adjusts output timing for the selected CCD line structure. This integration reduces the external analog-chain count while maintaining consistent clocking across the sensor array. The resulting LVDS or CMOS data can feed a downstream image processor or capture system, provided that interface timing matches the receiving device.

🖨️

Contact Image Sensor Document Imaging

The WM8234GEFL/V is appropriate for CIS-based scanners where multiple sensor lines produce parallel analogue outputs requiring consistent sampling and normalization. The device supports correlated double sampling for CIS signals and includes an internal 5-bit DAC for generating the required reference level. Six independently processed channels reduce the need for separate amplifiers and sampling circuits, while programmable gain, AGC, and offset adjustment help preserve usable image contrast as illumination or sensor conditions vary. The 70MSPS capability provides headroom above the stated 23MSPS-per-channel pixel rate, supporting both office-document and production-speed scanning systems.

🏢

Photocopier and MFP Optical Engine

The WM8234GEFL/V suits color and monochrome copier imaging engines that digitize several CCD or CIS outputs in parallel. Six channels with 16-bit resolution support full-line sensor acquisition, while programmable gain and offset adjustment compensate for channel-to-channel variation in the optical path. AGC can stabilize signal amplitude, and the sensor timing generator coordinates line transfer and pixel sampling from a common reference. Designers can select LVDS for high-speed point-to-point transfer or CMOS for a parallel output architecture. The integration of timing, analog conditioning, and digitization helps constrain board area and reduces the synchronization burden on the system controller.

🏭

Industrial Line-Scan Imaging

The WM8234GEFL/V can support industrial line-scan cameras that require multiple synchronised analogue channels and flexible sensor timing. Its clock generator accepts slow or fast references and adjusts the output timing for different sensor transfer sequences, while the six-channel architecture captures parallel detector outputs at pixel rates up to 23MSPS per channel. Programmable gain, offset, AGC, and correlated double sampling help normalize optical signals before conversion. For machine-vision systems, the choice between LVDS and CMOS output depends on cable length, receiver availability, and required clocking topology, so the interface should be selected with the complete camera and processing chain in mind.

📠

Fax Machine Sensor Interface

The WM8234GEFL/V provides the core signal-processing functions required for a document-transmission sensor front end. Six 16-bit channels allow simultaneous conversion of multiple sensor outputs, while correlated double sampling, gain control, and offset adjustment condition the incoming analogue signals. The timing generator produces coordinated sensor drive clocks from a system reference, reducing the amount of external timing generation required. The WM8234 is discontinued, so this application is primarily relevant to maintenance and refurbishment of installed fax equipment. When qualifying a repair, verify the sensor timing mode, reference level, digital output configuration, and supply sequencing against the original equipment schematics.

🔧

Legacy Scanner Production and Refurbishment

The WM8234GEFL/V remains applicable to production continuation and refurbishment of scanners whose sensor electronics are based on the WM8234 architecture. The six-channel, 16-bit digitizer handles CCD or CIS outputs at up to 23MSPS per channel and provides the timing generation required by those sensors. Its LVDS and CMOS outputs support different downstream receiver arrangements, while integrated gain, AGC, offset, and clamping reduce external conditioning circuitry. Because the product is discontinued, a drop-in replacement should be validated at the board level, including reference levels, clock polarity, data-output mapping, and interface signal integrity rather than by package outline alone.

סיכום מוצרים מומלצים

WM8234GEFL/RV Same-family six-channel AFE with equivalent sampling architecture בשימוש ב-: CCD Document Scanner Imaging, Photocopier and MFP Optical Engine, Fax Machine Sensor Interface, Legacy Scanner Production and Refurbishment WM8234GEFL Same-family base-number variant for equivalent sensor digitization בשימוש ב-: Contact Image Sensor Document Imaging, Industrial Line-Scan Imaging, Legacy Scanner Production and Refurbishment
What is the WM8234GEFL/V used for?
The WM8234GEFL/V is a six-channel, 16-bit analog front end and digitizer for CCD and contact image sensor imaging systems. According to the Cirrus Logic WM8234 datasheet, it processes analogue sensor outputs at pixel sample rates up to 23MSPS per channel and provides LVDS or CMOS digital outputs. It is suited to scanners, copiers, fax machines, and industrial imaging equipment.
What resolution and sampling speed does the WM8234GEFL/V provide?
The WM8234GEFL/V provides 16-bit resolution across six analog channels, with an operating speed up to 70MSPS. The manufacturer datasheet states that pixel sample rates can reach 23MSPS per channel. This combination supports multi-line CCD and CIS imaging systems where several sensor outputs must be converted in parallel.
Where can I download the WM8234GEFL/V datasheet PDF?
The manufacturer-hosted WM8234 datasheet PDF is available at https://statics.cirrus.com/pubs/proDatasheet/WM8234_v4.8.pdf. It contains the device description, electrical characteristics, application information, timing details, and pin-description tables. Use the pin-description and interface sections when assigning PCB nets and configuring the LVDS or CMOS output path.
Does the WM8234GEFL/V support both CCD and CIS sensors?
Yes, the WM8234GEFL/V supports CCD sensors and contact image sensors. The Cirrus Logic datasheet explains that correlated double sampling can reference CIS signals, while reset-level clamping can be used with CCD signals. The internal 5-bit DAC generates the reference level needed for these operating modes.
What is the difference between WM8234GEFL/V and WM8234GEFL/RV?
The WM8234GEFL/V and WM8234GEFL/RV share the same six-channel, 16-bit analog front end function and 56-QFN 7 x 7 mm package. The ordering-code difference concerns the packing arrangement rather than the core conversion architecture. Both are identified as 70MSPS six-channel AFE devices, so confirm the reel or packing format required by the production line before ordering.
Can WM8234GEFL/RV replace WM8234GEFL/V?
The WM8234GEFL/RV can serve as a drop-in functional alternative to the WM8234GEFL/V because both are listed as six-channel, 16-bit, 70MSPS devices in the same 56-QFN 7 x 7 mm package. Pin compatibility still depends on the specific ordering configuration and interface settings. Verify the pin-description table, packing format, and production requirements before substitution.
What are the key specifications engineers should know about WM8234GEFL/V?
The main WM8234GEFL/V specifications are six analog channels, 16-bit resolution, operation up to 70MSPS, and pixel rates up to 23MSPS per channel. It includes programmable gain, automatic gain control, offset adjustment, clamping, correlated double sampling or sample-and-hold, sensor timing generation, and LVDS or CMOS outputs. The device uses a 56-QFN 7 x 7 mm package.
When should I choose WM8234GEFL/V over a generic six-channel ADC?
Choose the WM8234GEFL/V when the design needs an integrated CCD or CIS imaging front end rather than a standalone ADC. It combines six analog channels, 16-bit conversion, programmable gain and offset, AGC, correlated double sampling, timing generation, and flexible digital outputs in one package. This can reduce external circuitry and simplify sensor synchronization in scanner and copier systems.
Is the WM8234GEFL/V suitable for industrial imaging systems?
The WM8234GEFL/V is suitable for industrial imaging systems that use CCD or contact image sensors and require six synchronized analog channels. Its sensor timing generator accepts a slow or fast reference clock, while each channel supports programmable gain, AGC, offset adjustment, and correlated double sampling. Validate temperature range and supply limits against the manufacturer datasheet for the deployed environment.
What does the WM8234GEFL/V sensor timing generator do?
The WM8234GEFL/V sensor timing generator produces the timing signals required to transfer charge from the imaging sensor and coordinate conversion across the six channels. According to the Cirrus Logic datasheet, it accepts either a slow or fast reference clock and provides flexible adjustment of output timing clocks, making it possible to support a wider range of CCD and CIS sensor arrangements.
Does WM8234GEFL/V support automatic gain control?
Yes, automatic gain control is included in each of the six analog signal-processing channels. The channels also provide programmable gain, offset adjustment, reset-level clamping, and correlated double sampling or sample-and-hold. These functions allow signal normalization before digital conversion, which is valuable when sensor response varies across channels or changes with illumination.
What can replace the WM8234GEFL/V?
The WM8234GEFL/RV is the closest documented drop-in alternative because it has the same six-channel, 16-bit, 70MSPS core specification and the same 56-QFN 7 x 7 mm package. The WM8234GEFL base-number variant is another same-series candidate, although its exact ordering configuration should be checked. No qualified cross-brand drop-in replacement is identified by the available manufacturer and distributor information.
Is there a cross-brand drop-in equivalent for the WM8234GEFL/V?
No cross-brand drop-in equivalent is established by the available manufacturer and distributor information. The closest documented options are Cirrus Logic family members using the same six-channel AFE architecture and 56-QFN package. A different manufacturer’s AFE should be treated as a redesign candidate until channel timing, digital interfaces, software configuration, and board-level compatibility are verified.
How is the WM8234GEFL/V price determined?
Current commercial terms for the WM8234GEFL/V should be requested through the Request a Quote form on this page. Because the product is discontinued, its availability and order quantities may depend on remaining factory inventory or authorized supply. Provide the required quantity, packing format, date code requirements, and target delivery schedule in the quotation request.
Where can I buy WM8234GEFL/V and what is the lead time?
Use the Request a Quote form on this page to ask about WM8234GEFL/V availability, minimum order quantity, and current lead time. The Cirrus Logic product page identifies the WM8234 family as discontinued, so lead time can vary with remaining inventory and the required 56-QFN packing arrangement. Confirm production quantities and date-code requirements when submitting the request.
Is WM8234GEFL/V still active?
No, Cirrus Logic identifies the WM8234 as discontinued on its official product page. The WM8234GEFL/V therefore belongs in an end-of-life sourcing plan rather than a new-design preference. For a new imaging subsystem, evaluate a currently supported digitizer while using the WM8234 for repair, refurbishment, or previously designed production equipment.

נתוני עזר הנדסיים עבור WM8234GEFL/V — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the WM8234GEFL/V when maintaining or producing equipment designed around the Cirrus Logic WM8234 six-channel AFE, particularly CCD or CIS scanners, copiers, and fax machines. The WM8234GEFL/RV is the closest documented alternative because it retains the same six-channel, 16-bit, 70MSPS ratings and 56-QFN 7 x 7 mm package; select it when its packing arrangement matches the production requirement. The WM8234GEFL base-number variant is also suitable when its ordering details and configuration are confirmed. Neither option changes the need to validate clock polarity, sensor timing, reference level, and data-output mapping. For new imaging products, evaluate a currently supported AFE because Cirrus Logic identifies the WM8234 family as discontinued, and treat cross-brand products as redesign candidates unless complete interface and board-level qualification is completed.

השוואה עם חלופות

פרמטר מוצר זה WM8234GEFL/RV WM8234GEFL
Brand Cirrus Logic Cirrus Logic Cirrus Logic
Package 56-QFN (7 x 7 mm) 56-QFN (7 x 7 mm) 56-QFN (7 x 7 mm)
Product Type 6-Channel analog front end and digitizer 6-Channel analog front end and digitizer WM8234 family analog front end
Sensor Support CCD and contact image sensors (CIS) CCD and contact image sensors (CIS) CCD and contact image sensors (CIS)
Digital Data Output LVDS and CMOS LVDS and CMOS LVDS and CMOS

מבדילים עיקריים

  • Integrated six-channel imaging front end reduces separate conditioning and conversion stages (לעומתWM8234GEFL)
  • Direct match to the documented WM8234GEFL/RV core architecture (לעומתWM8234GEFL/RV)
  • Supports both CCD and CIS acquisition with integrated timing generation (לעומתWM8234GEFL/RV)

הערות תכנון

Route the six analogue sensor inputs as a compact, symmetric group and keep switching circuitry and high-speed data return paths away from these nets. Place input and bypass capacitors at the corresponding device pins using the manufacturer’s reference layout. The QFN exposed pad and its thermal vias should follow the package drawing, while sensor-clock lines should be length-matched where the selected timing mode depends on propagation delay.

Determine the LVDS or CMOS interface configuration before final routing because the two output modes impose different topology, termination, and receiver requirements. For LVDS, follow the manufacturer’s differential-routing guidance and provide the specified termination. For CMOS, maintain a continuous reference plane, control return-current paths, and verify source-synchronous clock skew against the receiving device. Do not interchange the interfaces without checking operating-mode configuration.

Do not treat a shared package outline as proof of interchangeability. Confirm sensor clock polarity, line timing, reference-voltage settings, internal DAC use, data-output mapping, and digital interface configuration against the WM8234 datasheet and the original board schematic. The WM8234GEFL/RV is the closest documented packing alternative; validate the required reel format and production quantities before treating either ordering code as a substitute.

Use separate, stable supply paths for the analogue and digital sections if the device documentation identifies separate supply pins. Place the recommended bypass capacitors directly at the pins, keep the supply return path continuous beneath the device, and avoid sharing high-current return paths with sensitive sensor inputs. Verify the required startup order and enable timing against the manufacturer’s power-sequencing diagrams before connecting a sensor module.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The official manufacturer product page identifies the WM8234 family as discontinued. RoHS, REACH, halogen-free, lead-free, and conflict-minerals declarations are not stated in the available manufacturer or distributor information and are therefore recorded as unknown.

הנתונים אומתו בתאריך: 2026-11-08 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

WM8234GEFL/V datasheet WM8234GEFL/V datasheet pdf WM8234GEFL/V pinout WM8234GEFL/V specifications WM8234GEFL/V price WM8234GEFL/V stock WM8234GEFL/V equivalent WM8234GEFL/V replacement WM8234GEFL/V vs WM8234GEFL/RV Cirrus Logic WM8234GEFL/V WM8234GEFL 56-QFN pinout WM8234GEFL scanner application 56-QFN 6-channel 16-bit AFE what is the WM8234GEFL/V

רכיבים ומונחים קשורים

Cirrus Logic Wolfson Microelectronics WM8234GEFL/V WM8234GEFL/RV WM8234GEFL analog front end AFE analog front end and digitizer ADC integrated circuit semiconductor six-channel AFE 16-bit resolution 70 MSPS 23 MSPS pixel sample rate CCD sensor contact image sensor CIS correlated double sampling CDS sample and hold automatic gain control AGC programmable gain offset adjustment reset-level clamping internal 5-bit DAC sensor timing generator LVDS output CMOS output 56-QFN package QFN family surface-mount device RoHS REACH scanner imaging copier imaging industrial line-scan imaging
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר