WM8351CGEB/V - Stereo Audio Codec with Power Management | Cirrus Logic
Teilenummer: WM8351CGEB/V ✓ AktivWM8351CGEB/V Übersicht
An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone or headphone signals. In the hierarchy of electronic components, the WM8351CGEB/V is an audio codec within the broader categories of ADC/DAC converter, interface IC, and power management IC. Its integrated power-management block places it in the same device family as the company’s AudioPlus stereo codec products.
The device provides two ADC channels, two DAC channels, 24-bit conversion resolution, and a maximum identified sampling rate of 48 kHz. These attributes suit applications requiring full-duplex stereo audio paths, such as telephony, communication endpoints, portable media equipment, and embedded audio systems. The integrated power-management section is intended to simplify system partitioning around the codec and its associated analog rails.
The 129-pin FBGA package supports a dense, mixed-signal layout with separate analog, digital, and power-related connections. Because the package contains numerous pins and the board-level design depends on precise routing, the manufacturer pin-description table and reference layout should be used directly when allocating PCB tracks. The BGA construction also makes inspection and assembly-process planning essential during production.
Typical applications include two-way communication terminals, audio-equipped embedded controllers, smart-home endpoints, and portable listening devices. For designs requiring additional output channels, the PCM5122PWR digital-to-analog converter can serve as a companion when supported by the host audio architecture, while TAS5709PHPR and TAS5715PHPR provide class-D amplification when the system specification requires that function.
When designing the power architecture, treat the integrated power-management section as part of a carefully sequenced analog and digital supply network. Verify startup order, rail limits, decoupling requirements, and the exposed-pad connection against the manufacturer documentation. Because the BGA package has a large pin count and limited escape options, impedance-controlled routing and thermal via placement should be planned before schematic sign-off.
This page organizes the WM8351CGEB/V conversion, package, and application characteristics into an engineering-focused reference, adds application-specific design guidance, and identifies the limits of drop-in replacement qualification. It supports component selection, schematic review, and PCB planning without replacing the manufacturer’s complete electrical and pinout documentation.
Drop-in-Alternativen für WM8351CGEB/V – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit WM8351CGEB/V (gleiche Bauform und Footprint) – abweichend in Product Type.
WM8351BGEB/V
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
WM8351DGEB/V
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
WM8351CGEB/V Grenzwerte & elektrische Eigenschaften
| Product Type | Stereo audio codec with integrated power management |
| ADC Channels | 2 channels |
| DAC Channels | 2 channels |
| Conversion Resolution | 24 bit |
| Maximum Identified Sampling Rate | 48 kHz |
| Package Type | 129-pin FBGA |
| Montageart | Surface mount |
| Manufacturer | Cirrus Logic |
| Audio Input Configuration | Stereo, 2 ADC channels |
| Audio Output Configuration | Stereo, 2 DAC channels |
WM8351CGEB/V 129-pin fbga Pinbelegungsleitfaden
Pinbelegung für WM8351CGEB/V (129-pin fbga-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für WM8351CGEB/V.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
WM8351CGEB/V ist geeignet für 6 Anwendungs: Two-Way Voice Communication Terminal, Smart-Home Audio Endpoint, Portable Media Player, Embedded Audio Controller, Audio-equipped Accessory Hub, Communication and Conferencing Module.
Two-Way Voice Communication Terminal
The WM8351CGEB/V suits a two-way communication terminal because its two ADC channels can capture stereo microphone signals while its two 24-bit DAC channels support a full-duplex playback path. Operation up to 48 kHz is appropriate for voice and wideband communication designs. The integrated power-management block can simplify rail organization around the audio converter, although startup sequencing must follow the manufacturer guidance. Digital audio routing, microphone biasing, clocking, and analog grounding determine intelligibility and echo performance, so these sections should be designed with the manufacturer reference schematic rather than adapted from a generic codec layout.
Empfohlen
Smart-Home Audio Endpoint
A smart-home endpoint can use the WM8351CGEB/V for local voice capture and audio playback without separating the stereo codec and its associated power-management functions into different devices. The two-converter-channel arrangement supports a practical full-duplex architecture, while 24-bit resolution at 48 kHz provides a conventional voice-and-music operating point. Integrated power management may reduce the number of external rail-control components, but low-power behavior still depends on the selected operating modes and load conditions. Firmware must also coordinate wake-up, mute, and gain-control sequencing to prevent audible transients during device activation.
Empfohlen
Portable Media Player
The WM8351CGEB/V is suitable for portable media applications that require headphone playback, microphone capture, and compact component placement. Its 2-ADC, 2-DAC topology supports a stereo signal path, while the 129-pin FBGA permits access to numerous power, ground, and signal connections within a compact package. Battery-powered designs must examine the codec’s active and standby consumption, regulator efficiency, and thermal behavior before finalizing the power budget. Headphone output protection, pop-noise control, and the relationship between amplifier enable signals and codec startup should be verified during prototype testing.
Empfohlen
Embedded Audio Controller
Embedded controllers that need local audio can reduce system complexity by placing a 24-bit stereo codec and power-management block on a single device. The WM8351CGEB/V provides two capture channels, two playback channels, and a 48 kHz operating rate, making it appropriate for control panels, industrial HMIs, and connected equipment with voice feedback. The 129-ball package makes dense escape routing necessary, so power and ground partitioning should be planned at the placement stage. Firmware-level volume ramping and mute timing are as important as electrical design because they prevent audible transients when system modes change.
Empfohlen
Audio-equipped Accessory Hub
An accessory hub that combines voice capture with local cue playback can use the WM8351CGEB/V to provide a complete stereo conversion section in one package. Two ADC channels support microphone or line-level capture, and two 24-bit DAC channels support controlled playback through a 48 kHz digital audio path. Integrated power management may simplify rail control, but the system still needs careful partitioning between sensitive analog inputs and digital clock and interface routing. Testing should include channel-to-channel noise, gain adjustment, clock jitter sensitivity, and the behavior of mute or shutdown transitions during hot-plug events.
Empfohlen
Communication and Conferencing Module
A conferencing module benefits from the WM8351CGEB/V when it requires simultaneous stereo microphone capture and speaker playback from a compact mixed-signal device. The 24-bit converters and 48 kHz sampling rate align with common voice-processing pipelines, while the integrated power-management section can support a consolidated analog and digital rail plan. Echo cancellation, gain calibration, and microphone-to-speaker isolation remain system-level tasks. Close attention to analog grounding, clock routing, and differential input layout is necessary because the dense FBGA footprint provides limited escape space for high-speed and sensitive signals.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für WM8351CGEB/V – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | WM8351BGEB/V | WM8351DGEB/V |
|---|---|---|---|
| Package | 129-pin FBGA | 129-pin FBGA | 129-pin FBGA |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Product Type | Stereo audio codec with power management | Stereo audio codec with power management | Stereo audio codec with power management |
| ADC Channels | 2 channels | 2 channels | 2 channels |
| DAC Channels | 2 channels | 2 channels | 2 channels |
| Conversion Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Identified Sampling Rate | 48 kHz | 48 kHz | 48 kHz |
| Power Management | Integrated | Integrated | Integrated |
Wichtigste Unterscheidungsmerkmale
- Combines a stereo converter section with integrated power management (vs. WM8351BGEB/V)
- Matches the primary conversion characteristics of the WM8351D family revision (vs. WM8351DGEB/V)
- Provides a full-duplex stereo conversion path in one device (vs. WM8351DGEB/V)
Designhinweise
Treat the 129-ball FBGA escape as a placement decision rather than a late routing task. Assign analog inputs, digital interfaces, clocks, supply balls, and ground balls from the manufacturer pin-description table before arranging the component orientation. Keep sensitive analog routes short and isolated from digital and switching-node paths, and use the manufacturer reference layout to establish pad geometry and via arrangements.
Map every supply input and ground connection from the manufacturer pin table, including the exposed-pad or central-ball requirements where applicable. Sequence analog and digital rails so the codec is not enabled outside its valid operating state. Confirm the input voltage limits, regulator enable behavior, and decoupling values against the manufacturer recommendations before assigning capacitor footprints.
A 129-ball BGA can concentrate heat beneath the package while offering few top-side cooling surfaces. Estimate the worst-case local dissipation from the selected operating mode and analog load, then provide copper planes, thermal vias, and board-area margin without compromising analog isolation. Validate the thermal design with the enclosure and the highest expected ambient temperature, not only with an exposed circuit board.
Route clock, data, and control signals over continuous reference planes and observe the impedance and timing constraints stated in the manufacturer documentation. Keep the analog input network close to its assigned balls and establish a quiet return path for each sensitive input. Prototype testing should capture startup transients, mute behavior, full-scale playback, and switching activity from any adjacent converter.
Do not substitute a codec based only on bit depth and channel count. Confirm the digital interface, clock architecture, register behavior, power-management functions, absolute maximum ratings, and ball assignments. The B and D family revisions are candidate alternates, but revision-specific features must be reviewed before replacing the C revision without a board change.
Compliance-Informationen
Environmental, automotive, and material-compliance declarations are not stated in the component records used for this page. Confirm RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status with the manufacturer for the exact order code before qualification.