WM8351CGEB/V - Stereo Audio Codec with Power Management | Cirrus Logic
MPN: WM8351CGEB/V ✓ Hoạt độngWM8351CGEB/V Tóm tắt
An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone or headphone signals. In the hierarchy of electronic components, the WM8351CGEB/V is an audio codec within the broader categories of ADC/DAC converter, interface IC, and power management IC. Its integrated power-management block places it in the same device family as the company’s AudioPlus stereo codec products.
The device provides two ADC channels, two DAC channels, 24-bit conversion resolution, and a maximum identified sampling rate of 48 kHz. These attributes suit applications requiring full-duplex stereo audio paths, such as telephony, communication endpoints, portable media equipment, and embedded audio systems. The integrated power-management section is intended to simplify system partitioning around the codec and its associated analog rails.
The 129-pin FBGA package supports a dense, mixed-signal layout with separate analog, digital, and power-related connections. Because the package contains numerous pins and the board-level design depends on precise routing, the manufacturer pin-description table and reference layout should be used directly when allocating PCB tracks. The BGA construction also makes inspection and assembly-process planning essential during production.
Typical applications include two-way communication terminals, audio-equipped embedded controllers, smart-home endpoints, and portable listening devices. For designs requiring additional output channels, the PCM5122PWR digital-to-analog converter can serve as a companion when supported by the host audio architecture, while TAS5709PHPR and TAS5715PHPR provide class-D amplification when the system specification requires that function.
When designing the power architecture, treat the integrated power-management section as part of a carefully sequenced analog and digital supply network. Verify startup order, rail limits, decoupling requirements, and the exposed-pad connection against the manufacturer documentation. Because the BGA package has a large pin count and limited escape options, impedance-controlled routing and thermal via placement should be planned before schematic sign-off.
This page organizes the WM8351CGEB/V conversion, package, and application characteristics into an engineering-focused reference, adds application-specific design guidance, and identifies the limits of drop-in replacement qualification. It supports component selection, schematic review, and PCB planning without replacing the manufacturer’s complete electrical and pinout documentation.
Bộ thay thế dễ dàng lắp đặt cho WM8351CGEB/V — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với WM8351CGEB/V (cùng hình factor và footprint) — khác nhau ở Product Type.
WM8351BGEB/V
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
WM8351DGEB/V
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
WM8351CGEB/V Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo audio codec with integrated power management |
| ADC Channels | 2 channels |
| DAC Channels | 2 channels |
| Conversion Resolution | 24 bit |
| Maximum Identified Sampling Rate | 48 kHz |
| Package Type | 129-pin FBGA |
| Kiểu lắp đặt | Surface mount |
| Manufacturer | Cirrus Logic |
| Audio Input Configuration | Stereo, 2 ADC channels |
| Audio Output Configuration | Stereo, 2 DAC channels |
Hướng dẫn cấu hình chân WM8351CGEB/V 129-pin fbga
Cấu hình chân cho WM8351CGEB/V (129-pin fbga gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho WM8351CGEB/V.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
WM8351CGEB/V phù hợp cho 6 Áp dụngs: Two-Way Voice Communication Terminal, Smart-Home Audio Endpoint, Portable Media Player, Embedded Audio Controller, Audio-equipped Accessory Hub, Communication and Conferencing Module.
Two-Way Voice Communication Terminal
The WM8351CGEB/V suits a two-way communication terminal because its two ADC channels can capture stereo microphone signals while its two 24-bit DAC channels support a full-duplex playback path. Operation up to 48 kHz is appropriate for voice and wideband communication designs. The integrated power-management block can simplify rail organization around the audio converter, although startup sequencing must follow the manufacturer guidance. Digital audio routing, microphone biasing, clocking, and analog grounding determine intelligibility and echo performance, so these sections should be designed with the manufacturer reference schematic rather than adapted from a generic codec layout.
Được đề xuất
Smart-Home Audio Endpoint
A smart-home endpoint can use the WM8351CGEB/V for local voice capture and audio playback without separating the stereo codec and its associated power-management functions into different devices. The two-converter-channel arrangement supports a practical full-duplex architecture, while 24-bit resolution at 48 kHz provides a conventional voice-and-music operating point. Integrated power management may reduce the number of external rail-control components, but low-power behavior still depends on the selected operating modes and load conditions. Firmware must also coordinate wake-up, mute, and gain-control sequencing to prevent audible transients during device activation.
Được đề xuất
Portable Media Player
The WM8351CGEB/V is suitable for portable media applications that require headphone playback, microphone capture, and compact component placement. Its 2-ADC, 2-DAC topology supports a stereo signal path, while the 129-pin FBGA permits access to numerous power, ground, and signal connections within a compact package. Battery-powered designs must examine the codec’s active and standby consumption, regulator efficiency, and thermal behavior before finalizing the power budget. Headphone output protection, pop-noise control, and the relationship between amplifier enable signals and codec startup should be verified during prototype testing.
Được đề xuất
Embedded Audio Controller
Embedded controllers that need local audio can reduce system complexity by placing a 24-bit stereo codec and power-management block on a single device. The WM8351CGEB/V provides two capture channels, two playback channels, and a 48 kHz operating rate, making it appropriate for control panels, industrial HMIs, and connected equipment with voice feedback. The 129-ball package makes dense escape routing necessary, so power and ground partitioning should be planned at the placement stage. Firmware-level volume ramping and mute timing are as important as electrical design because they prevent audible transients when system modes change.
Được đề xuất
Audio-equipped Accessory Hub
An accessory hub that combines voice capture with local cue playback can use the WM8351CGEB/V to provide a complete stereo conversion section in one package. Two ADC channels support microphone or line-level capture, and two 24-bit DAC channels support controlled playback through a 48 kHz digital audio path. Integrated power management may simplify rail control, but the system still needs careful partitioning between sensitive analog inputs and digital clock and interface routing. Testing should include channel-to-channel noise, gain adjustment, clock jitter sensitivity, and the behavior of mute or shutdown transitions during hot-plug events.
Được đề xuất
Communication and Conferencing Module
A conferencing module benefits from the WM8351CGEB/V when it requires simultaneous stereo microphone capture and speaker playback from a compact mixed-signal device. The 24-bit converters and 48 kHz sampling rate align with common voice-processing pipelines, while the integrated power-management section can support a consolidated analog and digital rail plan. Echo cancellation, gain calibration, and microphone-to-speaker isolation remain system-level tasks. Close attention to analog grounding, clock routing, and differential input layout is necessary because the dense FBGA footprint provides limited escape space for high-speed and sensitive signals.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho WM8351CGEB/V — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | WM8351BGEB/V | WM8351DGEB/V |
|---|---|---|---|
| Package | 129-pin FBGA | 129-pin FBGA | 129-pin FBGA |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Product Type | Stereo audio codec with power management | Stereo audio codec with power management | Stereo audio codec with power management |
| ADC Channels | 2 channels | 2 channels | 2 channels |
| DAC Channels | 2 channels | 2 channels | 2 channels |
| Conversion Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Identified Sampling Rate | 48 kHz | 48 kHz | 48 kHz |
| Power Management | Integrated | Integrated | Integrated |
Bảo phân biệt quan trọng
- Combines a stereo converter section with integrated power management (vsWM8351BGEB/V)
- Matches the primary conversion characteristics of the WM8351D family revision (vsWM8351DGEB/V)
- Provides a full-duplex stereo conversion path in one device (vsWM8351DGEB/V)
Ghi chú thiết kế
Treat the 129-ball FBGA escape as a placement decision rather than a late routing task. Assign analog inputs, digital interfaces, clocks, supply balls, and ground balls from the manufacturer pin-description table before arranging the component orientation. Keep sensitive analog routes short and isolated from digital and switching-node paths, and use the manufacturer reference layout to establish pad geometry and via arrangements.
Map every supply input and ground connection from the manufacturer pin table, including the exposed-pad or central-ball requirements where applicable. Sequence analog and digital rails so the codec is not enabled outside its valid operating state. Confirm the input voltage limits, regulator enable behavior, and decoupling values against the manufacturer recommendations before assigning capacitor footprints.
A 129-ball BGA can concentrate heat beneath the package while offering few top-side cooling surfaces. Estimate the worst-case local dissipation from the selected operating mode and analog load, then provide copper planes, thermal vias, and board-area margin without compromising analog isolation. Validate the thermal design with the enclosure and the highest expected ambient temperature, not only with an exposed circuit board.
Route clock, data, and control signals over continuous reference planes and observe the impedance and timing constraints stated in the manufacturer documentation. Keep the analog input network close to its assigned balls and establish a quiet return path for each sensitive input. Prototype testing should capture startup transients, mute behavior, full-scale playback, and switching activity from any adjacent converter.
Do not substitute a codec based only on bit depth and channel count. Confirm the digital interface, clock architecture, register behavior, power-management functions, absolute maximum ratings, and ball assignments. The B and D family revisions are candidate alternates, but revision-specific features must be reviewed before replacing the C revision without a board change.
Thông tin tuân thủ
Environmental, automotive, and material-compliance declarations are not stated in the component records used for this page. Confirm RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status with the manufacturer for the exact order code before qualification.