XA7A50T-1CPG236Q Artix-7 FPGA 52K | AMD | Industrial
Teilenummer: XA7A50T-1CPG236Q ✓ AktivXA7A50T-1CPG236Q Übersicht
An FPGA is a programmable-logic semiconductor whose internal lookup tables, routing, block RAM, DSP blocks, and I/O can be configured after manufacture. The XA7A50T belongs to the Artix-7 product line, which is positioned below higher-density and higher-power families for cost-conscious embedded applications. The XA designation also identifies a variant with a distinct set of device resources and electrical characteristics, so designers should use the XA7A50T documentation rather than assume every XC7A50T feature is identical.
Key specifications include 52,160 programmable logic cells, 106 I/O, 28 nm process technology, and a 236-ball CSPBGA package. The available product listing identifies the device as a 1 V Artix-7 XA FPGA. These figures make it useful for protocol bridges, embedded control logic, industrial instrumentation, camera or image-processing front ends, and general-purpose accelerator designs. The large number of I/O supports parallel interfaces, while the logic-cell count allows substantial datapath and state-machine integration on one device.
The XA7A50T-1CPG236Q is the part-number form containing the device family, speed grade, package identifier, and temperature or qualification suffix. The -1 suffix indicates the -1 speed grade, CPG236 denotes the 236-ball CSPBGA package, and the final Q suffix identifies the specified temperature/qualification option. Exact operating temperature, I/O standards, memory quantities, configuration interface details, and timing limits should be confirmed in the manufacturer datasheet for the specific ordering code.
The principal design consideration is PCB complexity. A 238-CSBGA device requires a fine-pitch land pattern, careful escape routing, multilayer construction, and assembly process control. Power rails, configuration signals, clock inputs, and high-speed I/O require deliberate partitioning. The device should be placed using the manufacturer package drawing and evaluated with the intended Vivado implementation flow rather than inferred from a generic BGA symbol.
This product page synthesizes the device identity, package information, sourcing details, drop-in alternatives, and practical FPGA design guidance. It is intended to help engineers quickly confirm whether the XA7A50T-1CPG236Q matches the required logic density, I/O count, package, technology, and application before requesting a quote or beginning layout.
Drop-in-Alternativen für XA7A50T-1CPG236Q – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
XC7A50T-2CPG236C
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XA7A50T-1CPG236C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7A50T-1CPG236C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7A50T-2CPG236I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7A50T-1CPG236I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XA7A50T-1CPG236Q Grenzwerte & elektrische Eigenschaften
| Device Type | Artix-7 XA Field Programmable Gate Array (FPGA) |
| Logic Cells | 52,160 cells |
| User I/O | 106 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Speed Grade | -1 |
| Gehäuse | 238-CSBGA, 10 x 10 mm |
| Ball Count | 236 balls |
| Programming Technology | SRAM configuration |
| Montageart | Surface mount |
| RoHS-Status | Compliant |
| Lead-Free Status | Lead-free |
XA7A50T-1CPG236Q 238-csbga, 10 x 10 mm Pinbelegungsleitfaden
Pinbelegung für XA7A50T-1CPG236Q (238-csbga, 10 x 10 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XA7A50T-1CPG236Q.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XA7A50T-1CPG236Q ist geeignet für 6 Anwendungs: Industrial Instrumentation and Control, Protocol Conversion and Communication Bridge, Video and Image-Processing Front End, Industrial Networking Gateway, Embedded Control and Security Logic, Test and Measurement Equipment.
Industrial Instrumentation and Control
The XA7A50T-1CPG236Q fits compact industrial control modules that combine sensor conditioning, digital filtering, status monitoring, and communication logic. Its 52,160 logic cells provide room for parallel datapaths and control state machines, while 106 I/O support digital sensors, relays, indicators, and external buses. The 238-CSBGA package supports space-constrained boards but requires careful escape routing and multilayer construction. The -1 speed grade is appropriate when the instrument prioritizes deterministic control and moderate processing over maximum throughput. Designers should partition sensitive analog interfaces from digital activity, follow the manufacturer power and decoupling guidance, and validate timing through the Vivado implementation flow.
Empfohlen
Protocol Conversion and Communication Bridge
The XA7A50T-1CPG236Q is suitable for bridging legacy parallel interfaces to serial communication links when both sides require programmable timing and flexible data routing. The 106 available I/O can accommodate the legacy interface, while 52,160 logic cells can implement buffering, framing, checksums, and state management. Place the device centrally between interface groups to simplify routing, and use dedicated clock resources for source-synchronous interfaces. The -1 grade may be adequate for moderate bus rates, but each candidate interface rate must be checked against the implemented timing paths. Configuration storage and clocking should be designed according to the AMD reference architecture rather than inferred from generic FPGA practices.
Empfohlen
Video and Image-Processing Front End
The XA7A50T-1CPG236Q can implement preprocessing functions such as pixel formatting, thresholding, timing generation, and interface isolation in compact image-capture electronics. Its 52,160 logic cells are useful for parallel datapath logic, while the 106 I/O provide access to camera or sensor interfaces. The device is appropriate for low-to-moderate throughput pipelines where compact packaging and programmability outweigh the resources of a larger FPGA. Use the manufacturer I/O and timing specifications for the selected sensor interface, and constrain all source-synchronous paths in Vivado. High-speed signaling also requires controlled impedance routing, solid plane construction, and strict power and clock distribution to avoid data errors or timing margin loss.
Empfohlen
Industrial Networking Gateway
The XA7A50T-1CPG236Q can serve as the programmable control element in an industrial gateway that terminates multiple communication interfaces and routes data to an Ethernet backbone. The XA device's 106 I/O allow multiple parallel or low-speed interfaces to coexist, and its logic resources support packet processing, routing tables, and supervisory functions. The compact 238-CSBGA outline is advantageous in DIN-rail or embedded gateway hardware where board area is limited. Keep PHY traces away from FPGA fabric, provide independent filtering near transceiver supply pins, and use the manufacturer recommended decoupling network. The final design should be checked for timing closure, thermal margin, and sustained throughput under worst-case traffic.
Empfohlen
Embedded Control and Security Logic
The XA7A50T-1CPG236Q is appropriate for embedded systems that require deterministic control, protocol authentication, key handling, or event logging alongside conventional microcontroller-like behavior. The 52,160-cell fabric can host control logic, counters, interrupt controllers, and hardware-assisted checks while 106 I/O connect sensors, actuators, and status indicators. The -1 speed grade supports many real-time control tasks, but cryptographic timing and worst-case interrupt latency must be analyzed after implementation. Use separate clock and reset domains where required, avoid long combinational paths, and keep sensitive configuration or key-handling logic off externally accessible interfaces. Board-level security also requires protected configuration access and appropriate tamper controls.
Empfohlen
Test and Measurement Equipment
The XA7A50T-1CPG236Q can implement timing control, pattern generation, acquisition logic, and instrument communication in compact automated test equipment. Its 52,160 logic cells support parallel channels and stateful sequencers, while 106 I/O provide broad control and measurement connectivity. The device can consolidate several small CPLDs or discrete logic sections into one programmable platform, simplifying sequencing and revision. Use dedicated clocking resources to maintain measurement accuracy, and isolate sensitive input paths from high-current output switching. The 238-CSBGA package requires a high-density PCB assembly process, so prototype assembly, via-in-pad policy, and thermal performance should be evaluated early rather than after the schematic is frozen.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XA7A50T-1CPG236Q – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7A50T-2CPG236C | XA7A50T-1CPG236C | XC7A50T-1CPG236C | XC7A50T-2CPG236I | XC7A50T-1CPG236I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 238-CSBGA | 238-CSBGA | 238-CSBGA | 238-CSBGA | 238-CSBGA | 238-CSBGA |
| Device Family | Artix-7 XA | Artix-7 XC7A50T | Artix-7 XA7A50T | Artix-7 XC7A50T | Artix-7 XC7A50T | Artix-7 XC7A50T |
| Speed Grade | -1 | -2 | -1 | -1 | -2 | -1 |
| Temperature Suffix | Q | C | C | C | I | I |
| Logic Cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells |
| User I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
Wichtigste Unterscheidungsmerkmale
- Matches the requested XA device identity (vs. XC7A50T-2CPG236C)
- Lower nominal speed grade (vs. XC7A50T-2CPG236C)
- Q suffix supports the intended ordering specification (vs. XC7A50T-1CPG236C)
- Same 52,160-cell density in the CPG236 package family (vs. XC7A50T-1CPG236I)
Designhinweise
Use the manufacturer CPG236 land pattern, pinout, and ball-map data as the authority for the PCB footprint. A 238-CSBGA assembly on a 10 x 10 mm outline requires escape routing through multilayer vias and careful component-to-component spacing. Do not substitute a generic BGA footprint based only on ball count. Review solder-mask, paste, via-in-pad, assembly, and thermal-via recommendations with the board manufacturer before releasing fabrication data.
Implement separate power planes for the 1 V core and applicable I/O supplies, and follow the manufacturer pin-specific decoupling recommendations. Place bulk and high-frequency capacitors close to their associated supply balls with short ground returns. Validate voltage droop during configuration and maximum switching activity, because transient demand can exceed simple quiescent-current estimates. Use Vivado power reporting after implementation and confirm steady-state and transient limits against the device datasheet.
Partition clock, configuration, high-speed I/O, and ordinary user I/O into predictable board regions. Route clocks on continuous reference planes, provide controlled impedance for high-speed interfaces, and avoid switching-power paths beneath sensitive inputs. Keep the FPGA, voltage regulators, memory, and external clock sources close enough to maintain power and clock integrity, while maintaining assembly clearances required for the fine-pitch BGA and adjacent components.
A package match does not by itself prove that a replacement is functionally drop-in. The XC7A50T and XA7A50T order codes differ in device identity, speed grade, and temperature suffix, and they may also differ in documented resources or qualification. Before substitution, compare the full pinout, timing tables, power limits, configuration method, I/O standards, operating temperature, and package drawing. Recompile or revalidate the bitstream and timing constraints for the actual device.
Compliance-Informationen
A public product listing identifies the XA7A50T-1CPG236Q as RoHS-compliant and lead-free. No authoritative REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.