XC4VFX12-10SF363I - Virtex-4 FX 12,312-Cell FPGA | AMD
Teilenummer: XC4VFX12-10SF363I ✗ AbgekündigtXC4VFX12-10SF363I Übersicht
A field-programmable gate array is a programmable digital semiconductor whose interconnected logic, memory, DSP, and I/O resources can be configured after manufacture. The XC4VFX12 belongs to the Virtex-4 FX hierarchy: FPGA, Virtex-4 generation, FX platform, programmable logic device, and semiconductor. It is intended for applications requiring more logic and specialized processing than entry-level FPGAs while retaining a single integrated device.
Key characteristics include 10,544 logic cells or logic blocks, 12,312 total cells, 663,552 configuration bits, 240 user I/Os, 90 nm CMOS construction, and a stated internal frequency of 1028 MHz. The -10 speed designation identifies the device's performance grade. Its 363-pin FCBGA package supports dense board layouts, although careful via, escape-routing, thermal, and signal-integrity planning is required.
The Virtex-4 FX architecture integrates programmable logic with dedicated DSP resources, high-speed serial transceivers, block RAM, and embedded PowerPC processors. This combination allows designers to consolidate control logic, digital signal processing, network interfaces, and processor-based functions instead of implementing them across several discrete components. The 90 nm process also provides a meaningful density improvement over earlier FPGA generations while supporting a broad range of industrial embedded designs.
Typical applications include industrial control and automation, telecommunications equipment, networking infrastructure, test and measurement systems, embedded video processing, and industrial networking. The 240 I/O count is useful for parallel control and data interfaces, while the integrated DSP and serial capabilities support filtering, protocol handling, data acquisition, and communications functions.
The primary design constraint is board implementation around the 363-pin FCBGA. Use the manufacturer's package pinout and PCB escape-routing guidance, provide the required supply rails and decoupling, and validate high-speed serial routing against the relevant device specifications. Reuse of an existing design requires exact pin, package, speed-grade, voltage, and configuration compatibility checks.
This page consolidates the device's documented logic capacity, I/O count, process technology, package information, lifecycle position, replacement constraints, and practical implementation considerations. It also distinguishes true same-footprint alternatives from newer devices that may require a different package, logic configuration, or PCB redesign.
Drop-in-Alternativen für XC4VFX12-10SF363I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
XC4VFX12-10SFG363I
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC4VFX12-10SFG363C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC4VFX12-11SFG363I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC4VFX12-11SFG363C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC4VFX12-12SFG363I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC4VFX12-10SF363I Grenzwerte & elektrische Eigenschaften
| Device Type | Virtex-4 FX Field Programmable Gate Array (FPGA) |
| Logic Cells or Logic Blocks | 10,544 |
| Total Cells | 12,312 cells |
| User I/O Count | 240 I/Os |
| Configuration Memory | 663,552 bits |
| Speed Grade | -10 |
| Process Technology | 90 nm CMOS |
| Stated Internal Frequency | 1028 MHz |
| Gehäuse | 363-pin FCBGA (SF363) |
| Betriebstemperatur | 0°C to +85°C |
| Core Supply Voltage | 1.2 V |
| Logic Family | CMOS |
| Embedded Processing | PowerPC processor resources |
| Serial Connectivity | High-speed serial transceiver resources |
| Montageart | Surface mount |
| Lebenszyklusstatus | No longer in production; legacy family |
| REACH Status | REACH unaffected |
| HTSUS Code | 8542.39.0001 |
XC4VFX12-10SF363I 363-pin fcbga (sf363) Pinbelegungsleitfaden
Pinbelegung für XC4VFX12-10SF363I (363-pin fcbga (sf363)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC4VFX12-10SF363I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC4VFX12-10SF363I ist geeignet für 6 Anwendungs: Industrial Automation Controllers, Industrial Networking Gateways, Digital Signal Processing Systems, Test and Measurement Instruments, Telecommunications Equipment, Embedded Video and Image Processing.
Industrial Automation Controllers
The XC4VFX12-10SF363I fits industrial automation controllers that combine sequencing, machine interlocks, motion-command logic, communications, and local diagnostics. Its 10,544 logic cells and 12,312 total cells provide substantial combinational and sequential capacity, while 240 user I/Os support encoders, discrete sensors, actuators, and parallel fieldbus interfaces. The integrated DSP resources can accelerate signal conditioning or vibration analysis, and embedded PowerPC capability can support supervisory control. The -10 speed grade provides a defined timing class, while the 0°C to +85°C range suits controlled industrial environments. Final qualification should include thermal testing, power-integrity analysis, and worst-case timing review for every machine safety and motion-control path.
Empfohlen
Industrial Networking Gateways
The XC4VFX12-10SF363I can serve as the programmable fabric in an industrial networking gateway when a design requires deterministic packet handling, protocol conversion, and multiple parallel interfaces. The device's 240 user I/Os can support parallel Ethernet-derived data paths, management ports, and industrial protocol interfaces, while its high-speed serial transceivers can simplify physical-layer connections. Dedicated DSP blocks improve the practicality of filtering or packet classification, and embedded processor resources can execute control functions. For deployment, engineers should partition timing-critical traffic from supervisory processing and verify transceiver pin assignments against the selected package and Virtex-4 design documentation.
Empfohlen
Digital Signal Processing Systems
The XC4VFX12-10SF363I is appropriate for digital signal processing systems that combine parallel logic, high-speed data capture, and configurable arithmetic. Dedicated DSP resources can implement filters, correlators, waveform transforms, or modulation functions more efficiently than general-purpose logic alone, while 12,312 total cells support control, buffering, and interface logic. Its 240 user I/Os permit wide data buses to be connected without an external FPGA. A practical implementation should use the manufacturer's DSP cascade and clocking guidance, constrain interfaces according to the -10 speed grade, and evaluate output timing at both nominal and extended process conditions. This combination makes the device useful in instrumentation and industrial analysis subsystems.
Empfohlen
Test and Measurement Instruments
The XC4VFX12-10SF363I supports test and measurement instruments requiring reconfigurable acquisition logic, pattern generation, timing control, and data processing. Its large fabric can host parallel test channels and sequencing engines, while DSP resources accelerate filtering and mathematical operations. The 240 user I/Os provide substantial connectivity to converters, memories, and trigger systems, and embedded processing can coordinate higher-level instrument control. Because a 363-pin FCBGA also creates demanding layout requirements, the PCB should be designed with short return paths, continuous supply planes, and carefully modeled high-speed nets. Timing closure should be performed using the exact -10 device constraints rather than a broader family-average limit.
Empfohlen
Telecommunications Equipment
The XC4VFX12-10SF363I can be used in legacy telecommunications equipment where programmable throughput, serial interfaces, and deterministic control are required on one FPGA. Its high-speed serial transceiver resources suit line-rate connectivity, while 240 user I/Os support parallel control, framing, and alarm interfaces. Dedicated DSP resources support common filtering and modulation functions, and the embedded PowerPC resources can run higher-level protocol or management tasks. In a new telecom design, the device should be evaluated against current lifecycle requirements and migration plans. For an established platform, preserving the 363-FBGA layout and existing Virtex-4 toolchain can substantially reduce redesign and requalification effort.
Empfohlen
Embedded Video and Image Processing
The XC4VFX12-10SF363I is suitable for embedded image-processing subsystems that need parallel pixel pipelines, local control, and flexible I/O. Its DSP resources can accelerate filtering, color conversion, or other arithmetic stages, while 12,312 total cells accommodate line buffers, motion control, and interface logic. The 240 user I/Os can accommodate parallel sensor, display, and memory interfaces, while serial resources provide compact links where the system architecture permits. Because video timing and pixel-clock routing are sensitive, the design should constrain all video interfaces, account for package escape-routing delays, and include FPGA configuration and memory interfaces in signal-integrity simulation. The result is a compact implementation for industrial cameras, inspection equipment, and legacy display controllers.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC4VFX12-10SF363I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC4VFX12-10SFG363I | XC4VFX12-10SFG363C | XC4VFX12-11SFG363I | XC4VFX12-11SFG363C | XC4VFX12-12SFG363I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 363-pin FCBGA (SF363) | 363-pin FCBGA (SF363) | 363-pin FCBGA (SF363) | 363-pin FCBGA (SF363) | 363-pin FCBGA (SF363) | 363-pin FCBGA (SF363) |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Logic Cells or Logic Blocks | 10,544 | 10,544 | 10,544 | 10,544 | 10,544 | 10,544 |
| Total Cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells |
| User I/O Count | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os |
| Speed Grade | -10 | -10 | -10 | -11 | -11 | -12 |
| Temperature Suffix | I (industrial) | I (industrial) | C (commercial) | I (industrial) | C (commercial) | I (industrial) |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Configuration Memory | 663,552 bits | 663,552 bits | 663,552 bits | 663,552 bits | 663,552 bits | 663,552 bits |
Wichtigste Unterscheidungsmerkmale
- Exact industrial -10 speed-grade source (vs. XC4VFX12-10SFG363C)
- Timing headroom over the target speed grade (vs. XC4VFX12-12SFG363I)
- Consistent legacy platform integration (vs. XC4VFX12-10SFG363I)
Designhinweise
Treat the 363-pin FCBGA as a high-density routing problem. Follow the manufacturer package outline, ball map, escape-routing guidance, and via-in-pad or fanout recommendations; do not derive land patterns from a generic BGA drawing. Keep high-speed serial and clock nets short, provide a continuous ground reference, and route supply connections to minimize impedance and loop area. The PCB should also include the required configuration, clock, reset, and JTAG connections before routing begins.
The 1.2 V core specification does not describe the complete power architecture. Implement every external supply rail specified by the Virtex-4 data sheet, including required I/O supplies, with local high-frequency decoupling placed close to the device. Sequence supplies in the manufacturer-defined order, verify startup behavior, and test steady-state and transient current under realistic switching activity. Power-plane and via current density must be evaluated for the highest expected I/O activity.
Create and validate IBIS or equivalent board models for clocks, configuration signals, high-speed serial links, and external memory interfaces. Account for package escape-routing delay in FPGA timing constraints, and use the exact -10 speed-grade timing limits rather than a faster-family assumption. Check receiver thresholds, source-synchronous strobes, clock jitter, and crosstalk at the interfaces most likely to limit system margin.
Do not treat the XC4VFX12-10SFG363I as automatically interchangeable with the target solely because both use the 363-FBGA name. Verify the exact ordering table, temperature suffix, package construction, speed grade, exposed or missing balls, and solderability requirements. For a migration, preserve the original tool version, constraints, bitstream, and test methodology, then complete timing, functional, and system-level regression testing.
Estimated: if the FPGA dissipates 2.0 W and the implemented PCB has a total junction-to-ambient thermal resistance of 25°C/W, the estimated junction-temperature rise is 50°C above ambient. These values are illustrative engineering assumptions, not device guarantees. Determine actual dissipation from activity-dependent power estimation and use the manufacturer's thermal model, copper geometry, airflow, and ambient limits for the final reliability analysis.
Compliance-Informationen
The available technical listing identifies the part as REACH unaffected and provides HTSUS code 8542.39.0001. No definitive RoHS, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is shown for the exact target MPN.