XC7Z030-L2FBG676I - Dual Cortex-A9 Zynq SoC | AMD
Teilenummer: XC7Z030-L2FBG676I ✓ AktivXC7Z030-L2FBG676I Übersicht
A system on chip, or SoC, integrates a programmable logic fabric with one or more processors and dedicated peripherals. The Zynq-7000 architecture belongs to the FPGA and embedded-processing hierarchy: it combines Kintex-7 FPGA resources with a dual-core Arm Cortex-A9 subsystem. This architecture allows software running on the processor system to control algorithms implemented in programmable logic, reducing the need for separate processor and FPGA packages while avoiding a requirement for programmable logic in every digital function.
The XC7Z030-L2FBG676I provides 125K logic cells and an 800 MHz dual-core Arm Cortex-A9 processing configuration. Its integrated FPGA fabric supports parallel datapaths, protocol handling, signal processing, and hardware-assisted control functions. CoreSight enables integrated debug visibility, while the combined processing and programmable-logic architecture supports heterogeneous designs in which control software and hardware pipelines operate together.
The FBG676 package is a 676-ball FCBGA with a stated 27 mm by 27 mm body size. Ball pitch, exposed-pad requirements, power-plane distribution, and high-speed escape routing must be handled according to the manufacturer package and design documentation. Because this package contains a large number of power, ground, configuration, processor, memory, and programmable-I/O connections, a successful layout depends on the complete pinout and recommended power architecture rather than functional blocks alone.
Typical uses include industrial control, machine vision, test and measurement, communications equipment, embedded edge processing, and mixed processor-plus-logic systems. The dual Cortex-A9 subsystem is suited to operating systems, network services, and supervisory control, while the FPGA fabric can accelerate sampling, filtering, encoding, data movement, and other timing-critical tasks.
For a new design, treat the device as a complete platform rather than a conventional low-power MCU. Plan the power rails, decoupling network, DDR memory interface, clocking, configuration mechanism, boot storage, debug access, and high-speed PCB layout before schematic capture. Programmable logic timing must also be constrained and validated for the intended clocking and I/O architecture.
This product page consolidates the identified package, processing, logic-capacity, and interface characteristics, compares same-family configuration options, and highlights practical implementation considerations that help engineers evaluate the XC7Z030-L2FBG676I for embedded FPGA systems.
Drop-in-Alternativen für XC7Z030-L2FBG676I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC7Z030-L2FBG676I (gleiche Bauform und Footprint) – abweichend in Speed Grade, Package, Processor Architecture, Programmable Logic, Mounting Type.
XC7Z030-2FBG676I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-1FBG676I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-3FBG676E
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-L2FFG676I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z035-L2FBG676I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-L2FBG676I Grenzwerte & elektrische Eigenschaften
| Device Type | Zynq-7000 programmable system on chip |
| FPGA Family | Kintex-7 FPGA |
| Processor Core | Dual Arm Cortex-A9 MPCore |
| Maximum Processor Frequency | 800 MHz |
| Logic Cells | 125K |
| Debug Architecture | CoreSight |
| Package Type | 676-ball FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Package Designation | FBG676 |
| Montageart | Surface mount |
| Processor Count | 2 cores |
| Architecture | Zynq-7000 first-generation architecture |
XC7Z030-L2FBG676I fbg676 Pinbelegungsleitfaden
Pinbelegung für XC7Z030-L2FBG676I (fbg676-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC7Z030-L2FBG676I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC7Z030-L2FBG676I ist geeignet für 6 Anwendungs: Industrial Machine Control, Machine Vision Processing, Test and Measurement Equipment, Industrial Communications Gateway, Embedded Edge Processing, Aerospace Ground Equipment.
Industrial Machine Control
The XC7Z030-L2FBG676I fits machine-control systems that require both deterministic I/O handling and a higher-level control processor. Its dual-core Arm Cortex-A9 subsystem can run motion coordination, diagnostics, communications, and supervisory logic at the identified 800 MHz operating frequency, while 125K logic cells can implement encoder interfaces, timing, and parallel control paths. Keep the processor and high-speed programmable logic in separate clocking and power domains when necessary. The main design trade-off is that a large FPGA SoC requires careful DDR, clock, decoupling, and thermal planning compared with a discrete MCU and small FPGA arrangement.
Empfohlen
Machine Vision Processing
The XC7Z030-L2FBG676I is appropriate for vision systems that divide pixel transport, preprocessing, and control between programmable logic and software. The 125K FPGA fabric can implement parallel pixel pipelines, thresholding, filtering, or data-format conversion, while the dual Cortex-A9 cores can manage image buffers, device control, and application services. Connecting the fabric to external DDR through the device's memory interface can support larger frame buffers than logic-only implementations. Validate pixel-clock timing, memory bandwidth, and software-to-logic interfaces before finalizing the architecture.
Empfohlen
Test and Measurement Equipment
The XC7Z030-L2FBG676I can consolidate acquisition, trigger logic, data processing, and instrument control into one programmable platform. FPGA resources are useful for deterministic sampling and wide parallel buses, while the 800 MHz dual-core Arm subsystem can execute control software, protocol handling, and user-facing functions. The integrated architecture reduces inter-package communication compared with separate processor and FPGA implementations. The trade-off is design complexity: analog front ends, clock jitter, DDR layout, and high-speed I/O must be engineered as parts of the SoC platform rather than added later.
Empfohlen
Industrial Communications Gateway
The XC7Z030-L2FBG676I suits gateways that must terminate multiple data streams while running network and management services. The dual Cortex-A9 processors can support operating-system tasks, protocol stacks, configuration, and security services, while 125K logic cells can accelerate framing, packet filtering, CRC processing, or low-latency data paths. This division of labor is especially useful when deterministic handling must coexist with complex software. Designers should check external memory performance, transceiver characteristics, clock-domain crossings, and package-related signal-integrity requirements before implementation.
Empfohlen
Embedded Edge Processing
The XC7Z030-L2FBG676I supports edge systems that combine local software control with programmable hardware acceleration. The 800 MHz processor configuration can manage sensors, local storage, networking, and application logic, while FPGA fabric can accelerate filtering, encoding, analytics preprocessing, or deterministic I/O. This architecture can reduce external component count compared with a processor-plus-FPGA design and allows software and hardware features to be updated within one programmable platform. Power budgeting, processor activity profiles, DDR traffic, and thermal performance must be evaluated together because utilization changes can materially affect system power.
Empfohlen
Aerospace Ground Equipment
The XC7Z030-L2FBG676I can be evaluated for aerospace ground-support equipment that requires programmable acquisition, data conditioning, and supervisory processing in a compact device. The dual-core Arm Cortex-A9 subsystem supports control applications and high-level protocols, while 125K FPGA cells can implement timing, telemetry conditioning, and parallel interfaces. Ground-equipment applications can provide a practical environment for validating the device before considering airborne use. Confirm the exact environmental grade, radiation expectations, long-term availability, and applicable qualification requirements with AMD rather than inferring suitability from the industrial order code.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC7Z030-L2FBG676I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7Z030-2FBG676I | XC7Z030-1FBG676I | XC7Z030-3FBG676E | XC7Z030-L2FFG676I | XC7Z035-L2FBG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FFG676) | 676-ball FCBGA (FBG676) |
| Device Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor Configuration | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore |
| Speed Grade | -2 | -2 | -1 | -3 | -2 | -2 |
| Debug Architecture | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Wichtigste Unterscheidungsmerkmale
- Higher processor frequency than the -1 speed-grade option (vs. XC7Z030-1FBG676I)
- Same core Zynq-7000 resource target with a directly comparable -2 ordering option (vs. XC7Z030-2FBG676I)
- Broader temperature-ordering choice in the same device family (vs. XC7Z030-2FBG676I)
- Maintains the Zynq-7000 integrated processing architecture while offering a larger fabric family option (vs. XC7Z035-L2FBG676I)
Designhinweise
Plan the Zynq-7000 supply rails and decoupling before assigning the high-speed and memory interfaces. Separate processor, FPGA, memory, and I/O supplies where the architecture permits, and place the smallest decoupling capacitors directly at the relevant power and ground balls. Follow the AMD data sheet and power-estimation guidance because processor activity, programmable-logic utilization, DDR traffic, and I/O toggling can materially change total power. Validate the assembled board across operating modes rather than relying on a single typical-current estimate.
Use AMD's FBG676 package pinout files and the complete Zynq-7000 design guidance when assigning the PCB land pattern. The 676-ball package includes power, ground, configuration, memory, processor, and programmable-I/O balls; a simplified block diagram is not sufficient for layout. Review ball maps for every candidate ordering code, especially FBG676 versus FFG676, because the package code can represent a different ball assignment even when the body size is similar.
Estimate junction temperature from actual processor activity, FPGA utilization, I/O activity, DDR traffic, and the board's thermal path rather than using a generic package figure. Place the device in a PCB region with adequate copper and provide airflow when the expected power is high. Estimated calculation: use the measured or estimated device power in watts multiplied by the effective junction-to-ambient thermal resistance in degrees Celsius per watt to estimate junction-temperature rise. Repeat the calculation for worst-case operating conditions and verify it with board-level thermal testing.
Route DDR, high-speed I/O, clocks, and configuration signals according to the AMD implementation guidelines, including the specified length, layer-transition, return-path, and decoupling practices. A 676-ball package can make escape routing difficult even when the die-to-ball distance is short. Do not substitute a generic BGA fanout rule for the manufacturer constraints. Check interface voltage standards, transceiver configuration, clock jitter, and simultaneous-switching-noise behavior during schematic and layout review.
Compliance-Informationen
The identified ordering code and manufacturer documentation do not establish the requested compliance statuses on this page. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact AMD ordering code before production release.