XC7Z030-2FBG676I - 125K Cell Dual Cortex-A9 SoC | AMD
Teilenummer: XC7Z030-2FBG676I ✓ AktivXC7Z030-2FBG676I Übersicht
A Zynq-7000 SoC is a heterogeneous processing platform rather than a conventional FPGA or microcontroller alone. Its architecture integrates an Arm Cortex-A9-based hard processor subsystem with FPGA logic, programmable block RAM, DSP slices, high-speed serial links, and dedicated I/O. Software can run in the processor subsystem while time-critical filtering, interfaces, or protocol processing execute in parallel programmable logic.
Key resources include 125K logic cells, 400 DSP slices, 265 block RAMs, and four GTX high-speed transceiver links according to the device and application data. The Arm subsystem provides dual Cortex-A9 processing with CoreSight support, while the FPGA fabric supports hardware acceleration and flexible peripheral integration. This combination is especially valuable when a design requires both high-level Linux or real-time software control and deterministic data-path processing.
The FBG676 device uses a 676-pin flip-chip ball-grid-array package on a 27 x 27 mm substrate. AMD package-pinout resources specify separate package files in ASCII and CSV formats, which should be used when validating every ball assignment, power rail, high-speed differential pair, and exposed thermal land before PCB release.
Typical applications include industrial motion and machine control, network appliances, test equipment, embedded cameras, communications infrastructure, and software-defined radio. In an SDR architecture, Cortex-A9 software can manage configuration and protocols while the FPGA fabric performs high-rate filtering and digital conversion.
PCB design must account for numerous supply rails, high-speed transceiver routing, ball-grid-array escape routing, and package thermal performance. Use the AMD package files and datasheet power guidance to define layer transitions and decoupling, and verify the complete design against the pinout rather than relying only on package dimensions.
This page consolidates the device identity, source-backed technical characteristics, same-package upgrade paths, comparison criteria, and application guidance to help engineers qualify the XC7Z030-2FBG676I before schematic capture and PCB layout.
Drop-in-Alternativen für XC7Z030-2FBG676I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC7Z030-2FBG676I (gleiche Bauform und Footprint) – abweichend in Package, Mounting Type, Device Type, Programmable Logic, Logic Cells.
XC7Z030-L2FBG676I
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC7Z030-2FFG676I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-1FBG676C
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-1FFG676I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-3FFG676E
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-2FBG676I Grenzwerte & elektrische Eigenschaften
| Product Type | Zynq-7000 Kintex-7 FPGA SoC |
| Processor | Dual Arm Cortex-A9 MPCore |
| Processor Frequency | 800 MHz |
| Programmable Logic | 125K logic cells |
| DSP Resources | 400 DSP slices |
| Block RAM | 265 block RAMs |
| High-Speed Serial Links | 4 GTX links |
| Debug Support | CoreSight |
| Gehäuse | 676-pin FCBGA |
| Package Dimensions | 27 x 27 mm |
| Montageart | Surface-mount flip-chip BGA |
| Core Supply Voltage | 1.2 V |
| I/O Supply Voltage | 3.3 V |
| Processor Architecture | 32-bit Arm Thumb-2 |
XC7Z030-2FBG676I 27 x 27 mm Pinbelegungsleitfaden
Pinbelegung für XC7Z030-2FBG676I (27 x 27 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC7Z030-2FBG676I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC7Z030-2FBG676I ist geeignet für 6 Anwendungs: Industrial Automation and Motion Control, Software-Defined Radio, Embedded Vision and Camera Processing, Communications and Network Appliances, Test and Measurement Instrumentation, Aerospace and High-Reliability Control.
Industrial Automation and Motion Control
The XC7Z030-2FBG676I suits industrial controllers that must combine deterministic machine-control logic with a higher-level operating system. Its 800 MHz dual Cortex-A9 processor can coordinate communications, diagnostics, and supervisory control, while 125K FPGA logic cells execute time-critical sequencing or interface logic in parallel. The 400 DSP slices and 265 block RAMs support signal conditioning and data buffering without relying exclusively on the processor. In a compact controller, this architecture reduces component count and inter-device data movement. The design trade-off is PCB complexity: the 676-pin FCBGA requires multilayer escape routing, careful decoupling, high-speed length matching, and a thermal design based on copper and vias rather than exposed leads.
Empfohlen
Software-Defined Radio
The XC7Z030-2FBG676I fits a software-defined radio split between protocol management and real-time signal processing. Cortex-A9 software can handle configuration, networking, control protocols, and monitoring, while the programmable fabric performs high-rate filtering, symbol processing, or digital conversion. The device provides 400 DSP slices, 265 block RAMs, and four GTX links, giving a designer substantially more parallel throughput than a processor-only implementation. Designers should allocate the four GTX transceivers carefully because each high-speed interface introduces clocking, impedance, and signal-integrity constraints. The 676-ball package also makes connector fanout and thermal vias central to the PCB architecture, particularly when an enclosure limits airflow.
Empfohlen
Embedded Vision and Camera Processing
The XC7Z030-2FBG676I is appropriate for embedded imaging systems that combine image acquisition, preprocessing, and network or control software. Its programmable logic can execute pixel pipelines, filtering, thresholding, and frame-buffer operations in parallel, while the dual Cortex-A9 processor manages image algorithms, networking, user interfaces, or operating-system tasks. With 125K logic cells, 265 block RAMs, and 400 DSP slices, the device supports a meaningful hardware pipeline close to the image source and can reduce traffic across an external processor bus. Camera and display interfaces still require exact I/O selection and voltage compatibility. Because the SoC is a 27 x 27 mm, 676-pin BGA, board routing, connector placement, and enclosure heat dissipation must be addressed before the camera interface is frozen.
Empfohlen
Communications and Network Appliances
The XC7Z030-2FBG676I supports communications appliances that need protocol processing in software and packet handling or data-plane work in programmable logic. The processor subsystem can run networking stacks, management agents, encryption services, and diagnostics, while 125K FPGA logic cells accommodate custom framing, buffering, traffic shaping, or hardware acceleration. Its four GTX links provide a foundation for high-speed serial connections when board-level retimers, connectors, and clock architecture can support them. Partitioning between the processor and FPGA is the critical design decision: moving latency-sensitive work into hardware can improve determinism, but it increases verification and tool-flow complexity. The large BGA also requires a multilayer PCB with sufficient escape routing and power distribution around the device.
Empfohlen
Test and Measurement Instrumentation
The XC7Z030-2FBG676I is well suited to instrumentation that combines flexible signal processing with embedded control software. Time-critical acquisition, filtering, triggering, and data transformation can be implemented in the FPGA fabric, while the Cortex-A9 subsystem controls the instrument, runs the user interface, handles calibration, and communicates with a host. The 400 DSP slices and 265 block RAMs are useful for parallel numerical operations, and the processor-to-logic interface permits high-throughput data exchange when the design is partitioned carefully. Accurate results also depend on clean analog front ends and controlled clocking, which are external to the SoC. The 676-ball package demands careful BGA fanout and multilayer stack-up, so the instrument's connector density and thermal envelope should influence the architecture early.
Empfohlen
Aerospace and High-Reliability Control
The XC7Z030-2FBG676I can support embedded control and monitoring systems that benefit from combining processor software and programmable hardware. The Arm subsystem can execute supervisory functions, while FPGA logic can monitor fast-changing inputs and implement deterministic control paths. Using the same SoC for both functions may reduce interprocessor communication and board area, although deployment must remain consistent with the program's device qualification, radiation, temperature, and lifecycle requirements. The target's -2 speed grade and industrial I suffix should be evaluated against the broader qualification package rather than assumed sufficient for every aerospace program. Board-level power integrity and thermal margins are especially important in compact sealed systems, and designers should reserve enough copper and vias to remove heat from the BGA package.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC7Z030-2FBG676I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7Z030-L2FBG676I | XC7Z030-2FFG676I | XC7Z030-1FBG676C | XC7Z030-1FFG676I | XC7Z030-3FFG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FCBGA (27 x 27 mm) | 676-pin FCBGA (27 x 27 mm) | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA |
| Device Family | Zynq-7000 XC7Z030 | Zynq-7000 XC7Z030 | Zynq-7000 XC7Z030 | Zynq-7000 XC7Z030 | Zynq-7000 XC7Z030 | Zynq-7000 XC7Z030 |
| Speed Grade Code | -2 | -2 | -2 | -1 | -1 | -3 |
| Temperature Suffix | I | I | I | C | I | E |
Wichtigste Unterscheidungsmerkmale
- Combines an 800 MHz dual-core Arm processor with dedicated programmable logic (vs. XC7Z030-2FFG676I)
- Provides 400 DSP slices and 265 block RAMs for parallel signal processing (vs. XC7Z030-1FBG676C)
- Uses the industrial I temperature suffix with the -2 speed grade (vs. XC7Z030-1FBG676C)
Designhinweise
Begin the PCB layout with the official AMD package-device pinout files rather than a generic 676-BGA library. The 27 x 27 mm FBG676 footprint has 676 numbered balls, and small differences in ball-map family code can change power, ground, configuration, I/O, and transceiver assignments. Reserve compliant escape routing on the top layer, then place decoupling capacitors and power vias near the relevant device balls. Review every high-speed GTX lane as a controlled-impedance differential route with its specified return-path behavior.
Use the AMD data sheet to separate core, I/O, auxiliary, and transceiver supply requirements before selecting regulators or placing bulk capacitance. The device is associated with a 1.2 V core and 3.3 V I/O environment, but those values alone do not define rail sequencing, tolerance, or transient requirements. Place local high-frequency decoupling directly at the BGA power and ground balls, use multiple thermal and electrical vias where the footprint permits, and verify the complete rail network with power-integrity simulation using the actual layer stack-up and loading.
The flip-chip BGA has no protruding leads, so PCB copper and thermal vias are the principal board-level heat-spreading mechanism. Establish the target ambient temperature, processor activity, FPGA utilization, I/O load, and transceiver duty cycle before sizing the thermal path. Route heat from the package thermal land into inner copper layers and provide vias to a thermal plane where the mechanical design permits. Validate the assembled board with thermal imaging or thermocouples because processor-only estimates do not capture FPGA fabric, DDR, I/O, and power-conversion heating.
Compliance-Informationen
The comparison search refers to RoHS and REACH fields, but the returned excerpts do not state the target device's compliance values. No qualification claim is made for AEC-Q100 because the target is an FPGA SoC rather than an automotive-qualified device in the cited information.