XMC4400F100K512ABXQMA1 - 120MHz Cortex-M4 | Infineon
Teilenummer: XMC4400F100K512ABXQMA1 ✓ AktivXMC4400F100K512ABXQMA1 Übersicht
A microcontroller is a semiconductor system built around a CPU core, embedded memory, peripherals, and interfaces. In the hierarchy of electronic components, a microcontroller belongs to the embedded-processor and semiconductor families. Its combination of programmable logic, digital interfaces, and real-time control capabilities allows one device to supervise sensors, process data, and coordinate communication in an industrial equipment design.
The XMC4400F100K512ABXQMA1 combines a 120 MHz ARM Cortex-M4 processor with 512 KB of program flash. The Cortex-M4 architecture provides a 32-bit instruction set and deterministic real-time control capabilities, while the larger flash allocation supports embedded networking, industrial communication, and control firmware. Integrated 10/100 Ethernet provides a wired network interface for supervisory control, process monitoring, and connected automation equipment.
The manufacturer describes the XMC4400 as an industrial microcontroller family with an extensive peripheral set. Its 100-pin LQFP package exposes substantially more I/O than smaller 32-pin or 48-pin devices, allowing external interfaces and mixed-signal connectivity to be distributed across a single controller. Pin, peripheral, voltage, and timing details should be assigned from the pin-description and electrical-characteristics tables in the manufacturer datasheet.
Typical applications include industrial Ethernet equipment, factory automation controllers, programmable logic devices, sensor-hub designs, and compact embedded control platforms. The 512 KB flash capacity is useful for networking stacks and application firmware, while the 120 MHz processing rate supports responsive digital control. The integrated 10/100 Ethernet interface is especially relevant to designs that must exchange commands or telemetry over a local wired network.
When designing a PCB around the PG-LQFP-100-11 package, preserve the manufacturer's recommended decoupling, analog-supply, clock, and Ethernet layout practices. Check all supply rails, external component values, and unused-pin requirements against the datasheet before schematic release. Firmware integration also requires the correct peripheral configuration, startup support, and XMC4400 reference-manual guidance.
This page organizes the confirmed device identity, electrical facts, package details, commercially relevant questions, and defensible same-family alternatives. It also adds practical selection and design guidance intended to help engineers determine whether the XMC4400F100K512ABXQMA1 fits an embedded industrial-control design before requesting a quotation.
Drop-in-Alternativen für XMC4400F100K512ABXQMA1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XMC4400F100K512ABXQMA1 (gleiche Bauform und Footprint) – abweichend in Flash Organization, Package, Product Type, Supply Voltage.
XMC4400F100K512BAXQMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XMC4400F100F512BAXQMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XMC4400F100K512ABXQMA1 Grenzwerte & elektrische Eigenschaften
| Manufacturer | Infineon Technologies |
| Product Type | 32-bit industrial microcontroller |
| CPU Core | ARM Cortex-M4 |
| CPU Architecture | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Program Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Ethernet Interface | 10/100 Ethernet |
| Versorgungsspannung | 1.3 V or 3.3 V |
| Gehäuse | PG-LQFP-100-11 |
| Pin-Anzahl | 100 pins |
| Montageart | Surface mount |
| Device Series | XMC4000 |
| Product Qualification | Industrial |
XMC4400F100K512ABXQMA1 pg-lqfp-100-11 Pinbelegungsleitfaden
Pinbelegung für XMC4400F100K512ABXQMA1 (pg-lqfp-100-11-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XMC4400F100K512ABXQMA1.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XMC4400F100K512ABXQMA1 ist geeignet für 6 Anwendungs: Industrial Ethernet Control, Factory Automation Equipment, Programmable Logic Controller, Sensor and Data Hub, Connected Machine Monitor, Embedded Communication Controller.
Industrial Ethernet Control
The XMC4400F100K512ABXQMA1 fits industrial Ethernet controllers because its 120 MHz ARM Cortex-M4 core processes control logic while the integrated 10/100 Ethernet interface handles wired network communication. The 512 KB flash allocation provides room for an Ethernet stack, diagnostics, configuration data, and application firmware without requiring an external program-memory device. A typical design would place the controller between the Ethernet magnetics or PHY interface and local I/O, then use timers and communication tasks to supervise plant equipment. The 100-pin LQFP package also provides more interface options than a compact 32-pin MCU.
Empfohlen
Factory Automation Equipment
The XMC4400F100K512ABXQMA1 is suitable for factory automation equipment that must combine real-time digital control with network management. Its 32-bit Cortex-M4 core runs at 120 MHz, providing computational headroom for communication stacks and control tasks, while 512 KB of flash supports embedded firmware and parameter storage. The integrated 10/100 Ethernet connection allows supervisory systems to exchange status and commands over a local plant network. Its 100-pin package allows additional digital and analog interfaces to be routed to sensors, actuators, and operator I/O.
Empfohlen
Programmable Logic Controller
The XMC4400F100K512ABXQMA1 can serve as the central controller in a compact programmable logic controller. A 120 MHz ARM Cortex-M4 execution rate supports responsive scan cycles, communication servicing, and deterministic interrupt handling, and the 512 KB flash capacity can hold application logic and configuration firmware. Industrial controllers often benefit from the device's 100-pin package because it exposes more I/O than smaller MCU packages. Ethernet support provides an upward path for programming, diagnostics, telemetry, and integration with supervisory equipment.
Empfohlen
Sensor and Data Hub
The XMC4400F100K512ABXQMA1 fits a wired sensor hub that gathers machine or environmental measurements and forwards processed information over Ethernet. The 120 MHz Cortex-M4 core provides capacity for sampling routines, filtering, device diagnostics, and protocol processing, while the 512 KB flash region can accommodate sensor drivers and network firmware. The 10/100 Ethernet interface supports connection to a data concentrator without a separate communications processor. During hardware design, allocate the 100-pin package's I/O carefully among sensors, external transceivers, status indicators, and service interfaces.
Empfohlen
Connected Machine Monitor
The XMC4400F100K512ABXQMA1 is well suited to connected machine-monitoring systems that must combine local control with remote telemetry. Its 120 MHz 32-bit processor can execute condition-monitoring logic and communication tasks, and its 512 KB flash capacity supports a substantial embedded application. The integrated 10/100 Ethernet interface enables status reporting to a plant network or remote gateway. The 100-pin LQFP footprint provides access to multiple discrete inputs, outputs, and communications lines, making it practical for a monitor that must also handle local alarms and machine-control functions.
Empfohlen
Embedded Communication Controller
The XMC4400F100K512ABXQMA1 can act as an embedded communication controller for industrial equipment that exchanges commands and diagnostics over 10/100 Ethernet. Its 120 MHz ARM Cortex-M4 core can manage protocol processing alongside real-time supervisory functions, and 512 KB of flash provides space for communication firmware and application logic. The 100-pin package offers additional signals for local status, configuration, and peripheral interfaces. A production design should validate startup behavior, Ethernet clock requirements, isolation strategy, and firmware timing against the manufacturer datasheet and reference manual.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XMC4400F100K512ABXQMA1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XMC4400F100K512BAXQMA1 | XMC4400F100F512BAXQMA1 |
|---|---|---|---|
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| CPU Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| CPU Architecture | 32-bit | 32-bit | 32-bit |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz |
| Program Flash Capacity | 512 KB | 512 KB | 512 KB |
| Flash Ordering Code | K512 | K512 | F512 |
| Ethernet Interface | 10/100 Ethernet | 10/100 Ethernet | 10/100 Ethernet |
| Supply Voltage | 1.3 V or 3.3 V | 1.3 V or 3.3 V | 1.3 V or 3.3 V |
| Device Qualification | Industrial | Industrial | Industrial |
Wichtigste Unterscheidungsmerkmale
- Exact K512 flash ordering configuration (vs. XMC4400F100F512BAXQMA1)
- Confirmed 120 MHz Cortex-M4 processing platform (vs. XMC4400F100K512BAXQMA1)
- Integrated 10/100 Ethernet in the same industrial MCU (vs. XMC4400F100K512BAXQMA1)
Designhinweise
Follow the manufacturer layout recommendations for the PG-LQFP-100-11 footprint, including land pattern, pin-one orientation, solder mask, and copper recommendations. Route the Ethernet differential pair as a controlled-impedance transmission line with a continuous reference plane, minimize stubs and layer transitions, and place the external Ethernet interface components close to the relevant controller pins. Separate digital return currents from analog and clock routing where the datasheet identifies dedicated pins or supply domains.
Assign every supply and ground pin from the manufacturer pin-description and electrical-characteristics tables before schematic release. The device supports 1.3 V and 3.3 V operating configurations, but those figures describe device options rather than permission to combine supply domains arbitrarily. Use the manufacturer-recommended decoupling values and placement, preserve the required voltage tolerances, and confirm startup sequencing for the clock, Ethernet interface, and flash programming connections.
Do not treat a same-family ordering-code change as automatically production-equivalent. Before substituting XMC4400F100K512BAXQMA1 or XMC4400F100F512BAXQMA1, compare the complete Infineon ordering table, temperature class, qualification status, flash organization, errata, and active lifecycle. Also verify that the replacement uses the same PG-LQFP-100-11 land pattern and that existing firmware correctly identifies the device. This avoids a mechanically compatible part causing software or production-qualification problems.
The 100-pin package exposes many signals, but pin multiplexing and board-routing constraints remain decisive. Use the datasheet's alternate-function matrix to assign pins before laying out the PCB, reserve pins required for boot, debug, clock, and analog functions, and avoid assigning critical networking or timing signals late in layout. Check package pin assignments and exposed functions against the exact ordering derivative because similar XMC4400 suffixes can represent meaningful configuration differences.
Compliance-Informationen
The manufacturer identifies the XMC4400 as an industrial microcontroller, but the retrieved sources do not explicitly state the requested RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.