Infineon

XMC4400F100K512ABXQMA1 - 120MHz Cortex-M4 | Infineon

MPN: XMC4400F100K512ABXQMA1 ✓ Hoạt động
1.3 V or 3.3 V Vdss PG-LQFP-100-11 Package 120 MHz Speed 512 KB Memory
MOQ: 1 |

XMC4400F100K512ABXQMA1 Tóm tắt

Infineon Technologies XMC4400F100K512ABXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 512 KB of flash memory and integrated 10/100 Ethernet support. The device is supplied in a 100-pin PG-LQFP package designated PG-LQFP-100-11.

A microcontroller is a semiconductor system built around a CPU core, embedded memory, peripherals, and interfaces. In the hierarchy of electronic components, a microcontroller belongs to the embedded-processor and semiconductor families. Its combination of programmable logic, digital interfaces, and real-time control capabilities allows one device to supervise sensors, process data, and coordinate communication in an industrial equipment design.

The XMC4400F100K512ABXQMA1 combines a 120 MHz ARM Cortex-M4 processor with 512 KB of program flash. The Cortex-M4 architecture provides a 32-bit instruction set and deterministic real-time control capabilities, while the larger flash allocation supports embedded networking, industrial communication, and control firmware. Integrated 10/100 Ethernet provides a wired network interface for supervisory control, process monitoring, and connected automation equipment.

The manufacturer describes the XMC4400 as an industrial microcontroller family with an extensive peripheral set. Its 100-pin LQFP package exposes substantially more I/O than smaller 32-pin or 48-pin devices, allowing external interfaces and mixed-signal connectivity to be distributed across a single controller. Pin, peripheral, voltage, and timing details should be assigned from the pin-description and electrical-characteristics tables in the manufacturer datasheet.

Typical applications include industrial Ethernet equipment, factory automation controllers, programmable logic devices, sensor-hub designs, and compact embedded control platforms. The 512 KB flash capacity is useful for networking stacks and application firmware, while the 120 MHz processing rate supports responsive digital control. The integrated 10/100 Ethernet interface is especially relevant to designs that must exchange commands or telemetry over a local wired network.

When designing a PCB around the PG-LQFP-100-11 package, preserve the manufacturer's recommended decoupling, analog-supply, clock, and Ethernet layout practices. Check all supply rails, external component values, and unused-pin requirements against the datasheet before schematic release. Firmware integration also requires the correct peripheral configuration, startup support, and XMC4400 reference-manual guidance.

This page organizes the confirmed device identity, electrical facts, package details, commercially relevant questions, and defensible same-family alternatives. It also adds practical selection and design guidance intended to help engineers determine whether the XMC4400F100K512ABXQMA1 fits an embedded industrial-control design before requesting a quotation.

Bộ thay thế dễ dàng lắp đặt cho XMC4400F100K512ABXQMA1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XMC4400F100K512ABXQMA1 (cùng hình factor và footprint) — khác nhau ở Flash Organization, Package, Product Type, Supply Voltage.

Infineon
Flash Organization: 512K x 8
Package: 100-LQFP with exposed pad
Product Type: 32-bit industrial ARM Cortex-M4 microcontroller
So sánh với XMC4400F100K512ABXQMA1 →
Infineon
Flash Organization: 512K x 8 bit
Package: PG-LQFP-100
Product Type: 32-bit Arm Cortex-M4 microcontroller
So sánh với XMC4400F100K512ABXQMA1 →

XMC4400F100K512BAXQMA1

✅ Drop-In ⚠️ Thông số chưa được xác minh
Infineon
📦 PG-LQFP-100-11
32-bit Arm Cortex-M4 microcontroller · XMC4000 · Arm Cortex-M4 · 32 bit · 120 MHz · 512 kB · 512K x 8 bit · 3.3 V

Liên hệ để biết giá

Xem tài liệu →

XMC4400F100F512BAXQMA1

✅ Drop-In ⚠️ Thông số chưa được xác minh
Infineon
📦 PG-LQFP-100-11
32-bit industrial ARM Cortex-M4 microcontroller · ARM Cortex-M4 · 120 MHz · 512 KB · 512K x 8 · 32 bit/16 bit · 10/100 Ethernet MAC · 12 bit

Liên hệ để biết giá

Xem tài liệu →

XMC4400F100K512ABXQMA1 Tỷ lệ tối đa & tính chất điện

Manufacturer Infineon Technologies
Product Type 32-bit industrial microcontroller
CPU Core ARM Cortex-M4
CPU Architecture 32-bit RISC
Maximum CPU Frequency 120 MHz
Program Flash Memory 512 KB
Flash Organization 512K x 8 bits
Ethernet Interface 10/100 Ethernet
Điện áp cung cấp 1.3 V or 3.3 V
Hộp PG-LQFP-100-11
Số chân 100 pins
Kiểu lắp đặt Surface mount
Device Series XMC4000
Product Qualification Industrial

Hướng dẫn cấu hình chân XMC4400F100K512ABXQMA1 pg-lqfp-100-11

Cấu hình chân cho XMC4400F100K512ABXQMA1 (pg-lqfp-100-11 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân pg-lqfp-100-11 cho XMC4400F100K512ABXQMA1

Không có dữ liệu chân cụ thể sẵn có cho XMC4400F100K512ABXQMA1.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

XMC4400F100K512ABXQMA1 phù hợp cho 6 Áp dụngs: Industrial Ethernet Control, Factory Automation Equipment, Programmable Logic Controller, Sensor and Data Hub, Connected Machine Monitor, Embedded Communication Controller.

🌐

Industrial Ethernet Control

The XMC4400F100K512ABXQMA1 fits industrial Ethernet controllers because its 120 MHz ARM Cortex-M4 core processes control logic while the integrated 10/100 Ethernet interface handles wired network communication. The 512 KB flash allocation provides room for an Ethernet stack, diagnostics, configuration data, and application firmware without requiring an external program-memory device. A typical design would place the controller between the Ethernet magnetics or PHY interface and local I/O, then use timers and communication tasks to supervise plant equipment. The 100-pin LQFP package also provides more interface options than a compact 32-pin MCU.

🏭

Factory Automation Equipment

The XMC4400F100K512ABXQMA1 is suitable for factory automation equipment that must combine real-time digital control with network management. Its 32-bit Cortex-M4 core runs at 120 MHz, providing computational headroom for communication stacks and control tasks, while 512 KB of flash supports embedded firmware and parameter storage. The integrated 10/100 Ethernet connection allows supervisory systems to exchange status and commands over a local plant network. Its 100-pin package allows additional digital and analog interfaces to be routed to sensors, actuators, and operator I/O.

⚡

Programmable Logic Controller

The XMC4400F100K512ABXQMA1 can serve as the central controller in a compact programmable logic controller. A 120 MHz ARM Cortex-M4 execution rate supports responsive scan cycles, communication servicing, and deterministic interrupt handling, and the 512 KB flash capacity can hold application logic and configuration firmware. Industrial controllers often benefit from the device's 100-pin package because it exposes more I/O than smaller MCU packages. Ethernet support provides an upward path for programming, diagnostics, telemetry, and integration with supervisory equipment.

🧩

Sensor and Data Hub

The XMC4400F100K512ABXQMA1 fits a wired sensor hub that gathers machine or environmental measurements and forwards processed information over Ethernet. The 120 MHz Cortex-M4 core provides capacity for sampling routines, filtering, device diagnostics, and protocol processing, while the 512 KB flash region can accommodate sensor drivers and network firmware. The 10/100 Ethernet interface supports connection to a data concentrator without a separate communications processor. During hardware design, allocate the 100-pin package's I/O carefully among sensors, external transceivers, status indicators, and service interfaces.

📡

Connected Machine Monitor

The XMC4400F100K512ABXQMA1 is well suited to connected machine-monitoring systems that must combine local control with remote telemetry. Its 120 MHz 32-bit processor can execute condition-monitoring logic and communication tasks, and its 512 KB flash capacity supports a substantial embedded application. The integrated 10/100 Ethernet interface enables status reporting to a plant network or remote gateway. The 100-pin LQFP footprint provides access to multiple discrete inputs, outputs, and communications lines, making it practical for a monitor that must also handle local alarms and machine-control functions.

🔧

Embedded Communication Controller

The XMC4400F100K512ABXQMA1 can act as an embedded communication controller for industrial equipment that exchanges commands and diagnostics over 10/100 Ethernet. Its 120 MHz ARM Cortex-M4 core can manage protocol processing alongside real-time supervisory functions, and 512 KB of flash provides space for communication firmware and application logic. The 100-pin package offers additional signals for local status, configuration, and peripheral interfaces. A production design should validate startup behavior, Ethernet clock requirements, isolation strategy, and firmware timing against the manufacturer datasheet and reference manual.

What are the key specifications of XMC4400F100K512ABXQMA1 that engineers should know?
The XMC4400F100K512ABXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller rated at 120 MHz, with 512 KB of flash and 10/100 Ethernet. It is packaged in a 100-pin PG-LQFP-100-11 surface-mount package. According to the Infineon XMC4400 datasheet, the ordering designation identifies the 512 KB flash configuration within the broader XMC4000 industrial microcontroller family. The 120 MHz Cortex-M4 core, wired Ethernet capability, and relatively large 100-pin package are the principal selection criteria for embedded networking and industrial-control designs.
What is the operating voltage of XMC4400F100K512ABXQMA1?
The XMC4400F100K512ABXQMA1 operates from either 1.3 V or 3.3 V, depending on the configured device interface and supply arrangement. According to the Infineon XMC4400 datasheet, the ordering code includes the relevant voltage configuration for this derivative. The manufacturer datasheet should be used to associate each external supply domain with its permitted operating range, especially when the controller operates Ethernet, flash, and other high-performance peripherals simultaneously.
What processor core is used in XMC4400F100K512ABXQMA1?
The Infineon XMC4400F100K512ABXQMA1 uses a 32-bit ARM Cortex-M4 processor core operating up to 120 MHz. According to the manufacturer datasheet, this core belongs to the ARM Cortex-M family and supports a 32-bit RISC architecture. That combination is appropriate for real-time embedded control, digital signal-processing functions, and communication firmware that require deterministic interrupt handling without a separate external processor.
How much flash memory does XMC4400F100K512ABXQMA1 contain?
The XMC4400F100K512ABXQMA1 contains 512 KB of flash memory organized as 512K x 8 bits. According to the Infineon XMC4400 datasheet, the K512 portion of the ordering code identifies the 512 KB program-memory configuration. This capacity can accommodate an embedded Ethernet stack, device drivers, diagnostics, and application firmware, although the final bootloader and application size must be checked against the usable flash region and validation requirements.
What package does XMC4400F100K512ABXQMA1 use?
The XMC4400F100K512ABXQMA1 uses the PG-LQFP-100-11 surface-mount package with 100 pins. The Infineon ordering information identifies the package as PG-LQFP-100-11, while the family documentation confirms the 100-pin LQFP format. Its relatively high pin count provides access to many digital interfaces and mixed-signal functions, but the footprint requires a correspondingly dense PCB layout and careful escape routing for power, clock, and communication signals.
Where can I download the XMC4400F100K512ABXQMA1 datasheet PDF?
The official XMC4400 datasheet PDF is available from Infineon at https://www.infineon.com/assets/row/public/documents/30/49/infineon-xmc4400-datasheet-en.pdf. The document contains the ordering designations, electrical characteristics, physical characteristics, and device-family information needed to identify the correct XMC4400 derivative. Use the pin-description and electrical tables for PCB design, and consult the XMC4400 reference manual for detailed peripheral behavior and programming guidance.
Where can I find the XMC4400F100K512ABXQMA1 pinout?
The authoritative XMC4400F100K512ABXQMA1 pin assignment is found in the pin-description table of the Infineon XMC4400 datasheet. The device uses a 100-pin PG-LQFP-100-11 package, so its complete footprint includes 100 numbered positions, including supply, ground, analog, digital, clock, and communication functions. Do not infer an unused-pin connection from a generic LQFP drawing; use the manufacturer pin table when assigning PCB nets and confirming alternate-function multiplexing.
Is XMC4400F100K512ABXQMA1 suitable for industrial Ethernet equipment?
The XMC4400F100K512ABXQMA1 is suitable for industrial Ethernet equipment because it combines a 120 MHz ARM Cortex-M4 core, 512 KB of flash, and integrated 10/100 Ethernet in one industrial microcontroller. According to the Infineon product page, the XMC4400 is intended for industrial applications and includes a 10/100 Ethernet interface. Its 100-pin package also offers more external connectivity than smaller microcontroller packages, although Ethernet magnetics, clocking, isolation, and signal-layout requirements must be addressed separately.
What is the best drop-in replacement for XMC4400F100K512ABXQMA1?
The closest same-family drop-in candidate is XMC4400F100K512BAXQMA1 because it retains the XMC4400 device, 120 MHz ARM Cortex-M4 architecture, 512 KB flash configuration, and 100-pin LQFP format. Its ordering-code segment differs from the target, so the manufacturer ordering table must be checked for qualification, temperature, or ordering-option differences before substitution. No cross-manufacturer pin-to-pin replacement was established, and firmware, peripheral mapping, and PCB compatibility must be reviewed rather than relying on a generic functional match.
Can XMC4400F100K512BAXQMA1 replace XMC4400F100K512ABXQMA1?
XMC4400F100K512BAXQMA1 can be considered a same-family replacement candidate for XMC4400F100K512ABXQMA1 because both identify a 120 MHz XMC4400 ARM Cortex-M4 microcontroller with 512 KB flash in a 100-pin LQFP package. The differing AB and BA ordering-code segments may encode an option such as qualification or temperature class. According to the Infineon ordering information, verify the exact ordering table, errata applicability, and pin configuration before approving a production substitution.
When should I choose XMC4400F100K512ABXQMA1 over XMC4400F100F512BAXQMA1?
Choose XMC4400F100K512ABXQMA1 when the exact 512K x 8-bit flash organization identified by the K512 ordering code is required. XMC4400F100F512BAXQMA1 belongs to the same broad XMC4400 family and uses the F512 flash designation, so it is relevant when the manufacturer confirms that the alternative flash organization suits the design. According to Infineon ordering documentation, flash organization can affect firmware layout or device identification; review the ordering table rather than assuming the two codes are interchangeable.
XMC4400F100K512ABXQMA1 vs XMC4400F100K512BAXQMA1 - which is better for industrial control?
Both devices are XMC4400-family, 120 MHz ARM Cortex-M4 microcontrollers with a 512 KB-class flash configuration and 100-pin LQFP packaging. The target XMC4400F100K512ABXQMA1 remains the preferred selection when its exact AB ordering code matches the required qualification and temperature conditions. XMC4400F100K512BAXQMA1 is the practical substitute candidate when the manufacturer confirms that BA offers the needed commercial or qualification status. The deciding factors are the ordering-code meaning, lifecycle, and errata rather than raw CPU frequency.
Is XMC4400F100K512ABXQMA1 suitable for factory automation controllers?
The XMC4400F100K512ABXQMA1 is suitable for compact factory-automation controllers because it provides a 120 MHz 32-bit Cortex-M4 core, 512 KB of flash, 10/100 Ethernet, and 100 external pins in an industrial device. According to the Infineon XMC4400 documentation, the family combines an extensive peripheral set with the Cortex-M4 core. These characteristics support network-connected sensing, machine control, and equipment monitoring, while the 100-pin package provides room for multiple field-bus, communication, and discrete I/O connections.
Where can I buy XMC4400F100K512ABXQMA1 online?
Use the Request a Quote form on this page to request XMC4400F100K512ABXQMA1, current availability, minimum order quantity, and lead time. The device is an Infineon XMC4400 industrial microcontroller with a 120 MHz ARM Cortex-M4 core, 512 KB flash, and PG-LQFP-100-11 package. A quotation request lets the buyer confirm the exact ordering suffix, delivery packaging, and lifecycle status before committing a production BOM or changing the PCB footprint.
What is the price of XMC4400F100K512ABXQMA1?
Use the Request a Quote form on this page for the current XMC4400F100K512ABXQMA1 price, quantity breaks, and availability. The confirmed device specification is a 120 MHz ARM Cortex-M4 industrial microcontroller with 512 KB flash in a 100-pin PG-LQFP-100-11 package. The exact quotation depends on order quantity, delivery packaging, market conditions, and the requested delivery location, so confirm the commercial terms before placing a production order.
What is the lead time and stock status for XMC4400F100K512ABXQMA1?
Request the current XMC4400F100K512ABXQMA1 stock status, minimum order quantity, and lead time through the Request a Quote form on this page. The part is a 120 MHz, 512 KB-flash XMC4400 industrial microcontroller in a 100-pin LQFP package. A current quotation is required because inventory, scheduling, and delivery commitments can change independently of the device's technical specifications. Provide the target quantity and required delivery date with the request.

Dữ liệu tham khảo kỹ thuật cho XMC4400F100K512ABXQMA1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose XMC4400F100K512ABXQMA1 when the design requires an industrial ARM Cortex-M4 controller with a 120 MHz operating rate, 512 KB flash, integrated 10/100 Ethernet, and the PG-LQFP-100-11 footprint. XMC4400F100K512BAXQMA1 is the closest same-family substitution candidate when its ordering segment matches the required qualification, temperature, or lifecycle conditions; verify the complete Infineon ordering table before release. XMC4400F100F512BAXQMA1 should be selected only when the F512 flash organization is explicitly appropriate for the firmware and device-identification requirements. No cross-manufacturer drop-in alternative was established, so an MCU redesign should not be treated as a component substitution. For all candidates, check pin multiplexing, errata, Ethernet implementation requirements, toolchain support, and production qualification before replacing the target in a live design.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này XMC4400F100K512BAXQMA1 XMC4400F100F512BAXQMA1
Package PG-LQFP-100-11 PG-LQFP-100-11 PG-LQFP-100-11
Brand Infineon Technologies Infineon Technologies Infineon Technologies
CPU Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
CPU Architecture 32-bit 32-bit 32-bit
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz
Program Flash Capacity 512 KB 512 KB 512 KB
Flash Ordering Code K512 K512 F512
Ethernet Interface 10/100 Ethernet 10/100 Ethernet 10/100 Ethernet
Supply Voltage 1.3 V or 3.3 V 1.3 V or 3.3 V 1.3 V or 3.3 V
Device Qualification Industrial Industrial Industrial

Bảo phân biệt quan trọng

  • Exact K512 flash ordering configuration (vsXMC4400F100F512BAXQMA1)
  • Confirmed 120 MHz Cortex-M4 processing platform (vsXMC4400F100K512BAXQMA1)
  • Integrated 10/100 Ethernet in the same industrial MCU (vsXMC4400F100K512BAXQMA1)

Ghi chú thiết kế

Follow the manufacturer layout recommendations for the PG-LQFP-100-11 footprint, including land pattern, pin-one orientation, solder mask, and copper recommendations. Route the Ethernet differential pair as a controlled-impedance transmission line with a continuous reference plane, minimize stubs and layer transitions, and place the external Ethernet interface components close to the relevant controller pins. Separate digital return currents from analog and clock routing where the datasheet identifies dedicated pins or supply domains.

Assign every supply and ground pin from the manufacturer pin-description and electrical-characteristics tables before schematic release. The device supports 1.3 V and 3.3 V operating configurations, but those figures describe device options rather than permission to combine supply domains arbitrarily. Use the manufacturer-recommended decoupling values and placement, preserve the required voltage tolerances, and confirm startup sequencing for the clock, Ethernet interface, and flash programming connections.

Do not treat a same-family ordering-code change as automatically production-equivalent. Before substituting XMC4400F100K512BAXQMA1 or XMC4400F100F512BAXQMA1, compare the complete Infineon ordering table, temperature class, qualification status, flash organization, errata, and active lifecycle. Also verify that the replacement uses the same PG-LQFP-100-11 land pattern and that existing firmware correctly identifies the device. This avoids a mechanically compatible part causing software or production-qualification problems.

The 100-pin package exposes many signals, but pin multiplexing and board-routing constraints remain decisive. Use the datasheet's alternate-function matrix to assign pins before laying out the PCB, reserve pins required for boot, debug, clock, and analog functions, and avoid assigning critical networking or timing signals late in layout. Check package pin assignments and exposed functions against the exact ordering derivative because similar XMC4400 suffixes can represent meaningful configuration differences.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer identifies the XMC4400 as an industrial microcontroller, but the retrieved sources do not explicitly state the requested RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Dữ liệu được xác minh vào: 2026-11-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

XMC4400F100K512ABXQMA1 datasheet XMC4400F100K512ABXQMA1 pinout XMC4400F100K512ABXQMA1 datasheet pdf XMC4400F100K512ABXQMA1 equivalent XMC4400F100K512ABXQMA1 replacement XMC4400F100K512ABXQMA1 cross reference XMC4400F100K512ABXQMA1 price XMC4400F100K512ABXQMA1 stock Infineon XMC4400F100K512ABXQMA1 XMC4400F100K512ABXQMA1 LQFP-100 XMC4400F100K512ABXQMA1 120MHz Cortex-M4 XMC4400F100K512ABXQMA1 industrial Ethernet XMC4400F100K512ABXQMA1 vs XMC4400F100K512BAXQMA1 XMC4400F100K512ABXQMA1 application circuit XMC4400F100K512ABXQMA1 programming

Các bộ phận và thuật ngữ liên quan

Infineon Technologies XMC4400F100K512ABXQMA1 XMC4400F100K512BAXQMA1 XMC4400F100F512BAXQMA1 XMC4400 XMC4000 ARM Cortex-M4 32-bit RISC industrial microcontroller embedded processor semiconductor 10/100 Ethernet 512 KB flash 120 MHz PG-LQFP-100-11 LQFP family surface-mount package 1.3 V 3.3 V industrial control factory automation Ethernet controller flash organization program memory
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ