XMC4800-F144K2048AAXQMA1 - 144MHz Cortex-M4 | Infineon
Teilenummer: XMC4800-F144K2048AAXQMA1 ✓ AktivXMC4800-F144K2048AAXQMA1 Übersicht
An Arm Cortex-M4 microcontroller is a reduced-instruction-set processor for embedded control systems, combining a 32-bit architecture, hardware integer and floating-point processing, deterministic peripherals, and low-power operation. The XMC4800 belongs to the broader hierarchy of microcontroller, embedded processor, real-time control IC, and industrial automation semiconductor.
Principal features include a 144 MHz Cortex-M4 core, 2 MB of flash, 352 kB of RAM, and integrated 10/100 Mbit/s Ethernet. The EtherCAT node supports high-speed industrial fieldbus communication without requiring a separate communications ASIC. A rich set of timers, communication interfaces, analog peripherals, and general-purpose I/O makes the device suitable for machinery, motion control, PLC modules, robotics, and distributed automation controllers.
The XMC4800-F144K2048AAXQMA1 uses a 3.3 V supply, with the documented operating supply range extending from 3.13 V to 3.63 V. Its 144-pin LQFP footprint exposes substantially more I/O than smaller microcontroller packages. The exposed thermal pad assists heat transfer through the PCB, although final junction temperature depends on copper area, airflow, ambient temperature, switching activity, and the selected I/O configuration.
Typical deployments include EtherCAT servo drives, industrial Ethernet controllers, programmable automation equipment, sensor-hub controllers, and compact machine-control modules. The 144 MHz processing rate supports responsive control loops, while the integrated EtherCAT interface reduces board area and software complexity for cyclic fieldbus communication.
For a new design, reserve the exposed pad as a thermal and electrical ground connection, follow the manufacturer's pin and land-pattern guidance, and validate power sequencing, bus termination, and signal integrity on a production-intent board. Firmware should also include watchdog recovery, safe-state outputs, and communication supervision for industrial equipment.
This page combines manufacturer specifications, ordering information, practical design guidance, and clearly qualified same-brand replacement options. Review the manufacturer datasheet and reference manual before finalizing the PCB, clock, memory, EtherCAT, and safety-critical implementation.
Drop-in-Alternativen für XMC4800-F144K2048AAXQMA1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
XMC4800-F144K2048-AA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XMC4800F144K2048AAXQMA1
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XMC4800F144F2048AAXQMA1
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XMC4800-F144K2048AAXQMA1 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit industrial Arm Cortex-M4 microcontroller |
| CPU Core | Arm Cortex-M4 |
| CPU Architecture | 32 bit |
| Maximum CPU Frequency | 144 MHz |
| Flash Memory | 2048 kB (2 MB) |
| Flash Organization | 2M x 8 bit |
| RAM | 352 kB |
| Supply Voltage Range | 3.13 V to 3.63 V |
| Nominal Supply Voltage | 3.3 V |
| Ethernet Data Rate | 10 Mbit/s and 100 Mbit/s |
| Fieldbus Support | Integrated EtherCAT node |
| Gehäuse | PG-LQFP-144-24 |
| Package Dimensions | 20 mm x 20 mm |
| Exposed Pad | Yes, thermal and electrical pad |
| Montageart | Surface-mount LQFP |
XMC4800-F144K2048AAXQMA1 20 mm x 20 mm Pinbelegungsleitfaden
Pinbelegung für XMC4800-F144K2048AAXQMA1 (20 mm x 20 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XMC4800-F144K2048AAXQMA1.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XMC4800-F144K2048AAXQMA1 ist geeignet für 6 Anwendungs: EtherCAT Servo Drive Controller, Industrial PLC Communication Module, Industrial Robot Controller, Machine Vision Sensor Hub, Automotive CAN-Based Vehicle Control, Industrial Power-Supply Controller.
EtherCAT Servo Drive Controller
The XMC4800-F144K2048AAXQMA1 fits EtherCAT servo-drive controllers because its 144 MHz Arm Cortex-M4 core can execute real-time motor-control logic while the integrated EtherCAT node handles cyclic fieldbus traffic. The 2 MB flash provides room for motion-control code, parameter tables, and field-upgrade logic, while 352 kB of RAM supports control state and communication buffers. Its 144-pin LQFP package also exposes the timers and analog resources normally needed for position, current, and speed feedback. The principal design consideration is the exposed-pad thermal path: place adequate ground copper beneath the device, keep sensitive analog routing separated from switching nodes, and follow the manufacturer recommendations for EtherCAT PHY isolation and termination.
Empfohlen
Industrial PLC Communication Module
The XMC4800-F144K2048AAXQMA1 is well suited to distributed PLC I/O because it combines a 144 MHz Cortex-M4 processor with integrated 10/100 Mbit/s Ethernet and EtherCAT. Firmware can use the high-performance core for protocol processing, diagnostics, and local I/O management rather than depending solely on a low-rate communications controller. Its 2 MB flash is sufficient for a bootloader, network configuration, application firmware, and update metadata. The 144-pin package offers more external interface options than compact microcontroller packages. For dependable operation, isolate Ethernet routing from motor and relay traces, implement a hardware or software watchdog, and design recoverable communication states so a fieldbus interruption does not produce unsafe actuator commands.
Empfohlen
Industrial Robot Controller
The XMC4800-F144K2048AAXQMA1 supports compact industrial robot controllers where deterministic processing and deterministic Ethernet communication are both valuable. At 144 MHz, the Cortex-M4 core can coordinate motion state, sensor processing, fault management, and EtherCAT cyclic tasks. Its 352 kB RAM allows meaningful working buffers without forcing all data into flash, while the 2 MB program area can hold control firmware and configuration storage. The large 144-pin package provides access to multiple timers, communications, and mixed-signal functions. Engineers should use the timer and communication resources according to the manufacturer peripheral matrix, validate timing margin at the highest interrupt load, and treat watchdog recovery and safe actuator disable as mandatory parts of the safety design.
Empfohlen
Machine Vision Sensor Hub
The XMC4800-F144K2048AAXQMA1 can serve as a machine-vision sensor hub when local preprocessing and network transport must coexist with real-time machine control. The 144 MHz Cortex-M4 core can process sensor status, perform filtering, and manage buffered image-related metadata, while the integrated Ethernet and EtherCAT interfaces provide links to industrial infrastructure. The 2 MB flash accommodates embedded firmware and configuration data, and the 144-pin LQFP package provides a broad selection of general-purpose I/O. Because a vision system may combine high-speed data and sensitive analog measurements, place analog sections away from Ethernet and switching-power paths, provide local decoupling at supply pins, and verify timing and thermal performance with the intended sensor and storage peripherals operating simultaneously.
Empfohlen
Automotive CAN-Based Vehicle Control
The XMC4800-F144K2048AAXQMA1 can support CAN-oriented vehicle-control modules where a 144 MHz 32-bit processor, 2 MB flash, and extensive I/O are useful. The Cortex-M4 core can execute state-machine and diagnostics logic, while the 144-pin package exposes numerous communication and general-purpose pins. The integrated Ethernet capability also allows a gateway or diagnostic controller to bridge vehicle networks to industrial or test equipment. Before using the device in an automotive end product, confirm the exact temperature grade, automotive qualification status, functional-safety requirements, and operating lifetime in the manufacturer ordering documentation. PCB design should include transient protection, stable reference clocks, robust power sequencing, and a defined strategy for safe operation after reset or communications failure.
Empfohlen
Industrial Power-Supply Controller
The XMC4800-F144K2048AAXQMA1 can supervise a complex industrial power-conversion subsystem where control, telemetry, and fieldbus communication must share one controller. Its 144 MHz Cortex-M4 core can execute supervisory loops, fault logging, parameter updates, and communication stacks, while 2 MB flash provides room for firmware and configuration parameters. The integrated Ethernet or EtherCAT connection can expose measurements and control commands to a supervisory controller. The device should be used only where its analog, timer, and communication resources meet the power-stage requirements. Keep switching nodes and high-current paths separated from control traces, connect the exposed pad to the intended thermal and ground plane, and validate regulation accuracy, fault response, and safe-state behavior under worst-case line and load transients.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XMC4800-F144K2048AAXQMA1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XMC4800-F144K2048-AA | XMC4800F144K2048AAXQMA1 | XMC4800F144F2048AAXQMA1 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-144-24 | PG-LQFP-144-24 - same package | PG-LQFP-144-24 - same package | PG-LQFP-144-24 - same package |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| CPU Architecture | 32 bit | 32 bit | 32 bit | 32 bit |
| Maximum CPU Frequency | 144 MHz | 144 MHz | 144 MHz | 144 MHz |
| Flash Memory | 2 MB | 2048 kB | 2 MB | 2 MB |
Wichtigste Unterscheidungsmerkmale
- Combines a high-performance Cortex-M4 core with fieldbus integration (vs. XMC4800F144F2048AAXQMA1)
- High RAM capacity for industrial control workloads (vs. XMC4800-F144K2048-AA)
- Broad 144-pin integration reduces external I/O expansion (vs. XMC4800F144K2048AAXQMA1)
Designhinweise
Treat the exposed pad as the primary thermal path for the PG-LQFP-144-24 device. Connect it to the intended ground plane using the manufacturer land pattern, minimize thermal-via resistance, and provide copper area beyond the pad footprint where layout rules allow. Estimate junction temperature from actual power dissipation and the board-specific thermal resistance rather than relying only on the package rating. Validate the final assembly at maximum ambient temperature with Ethernet traffic, timers, analog blocks, and external loads active.
Implement the manufacturer reference layout for the 144-pin LQFP, including the exposed-pad geometry and pin-one orientation. Place local input and output decoupling capacitors adjacent to the relevant supply terminals, preserve a continuous ground reference beneath the device, and route high-speed clocks and communications away from switching nodes. Before release, compare the assembled PCB against the package drawing and manufacturer pin table; an incorrect exposed-pad connection or pin-one orientation can prevent programming or damage the device.
Use the manufacturer EtherCAT and Ethernet reference design as the basis for high-speed layout, clock generation, PHY selection, magnetic-device placement, and termination. Maintain the specified differential impedance, avoid stubs and unnecessary layer transitions, and keep return paths continuous. Validate eye quality and compliance on production-intent hardware because component placement, connector mechanics, and stackup can materially affect performance even when the schematic is unchanged.
Do not treat the XMC4800-F144K2048-AA base ordering code as automatically interchangeable with every XQMA1 suffix. Check temperature grade, qualification, production packing, and any suffix-defined characteristics before substitution. Likewise, verify the meaning of the K2048 and F2048 ordering positions rather than assuming they are electrically identical. Firmware, bootloader, and peripheral configuration should also be checked when moving between ordering variants or evaluating an exact replacement.
Compliance-Informationen
The manufacturer product page and ordering information should be checked for the current declarations applicable to the exact XQMA1 ordering code.