Infineon

XMC4800-F144K2048AAXQMA1 - 144MHz Cortex-M4 | Infineon

N.º de pieza: XMC4800-F144K2048AAXQMA1 ✓ Activo
3.13 V to 3.63 V Vdss PG-LQFP-144-24 Package 144 MHz Speed 2048 kB (2 MB) Memory
MOQ: 1 |

XMC4800-F144K2048AAXQMA1 Descripción general

The Infineon Technologies XMC4800-F144K2048AAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller with a 144 MHz operating frequency, 2 MB of flash memory, and an integrated EtherCAT node. It is packaged in a 144-pin PG-LQFP-24 package with an exposed pad, providing ample I/O and thermal conduction for industrial automation equipment.

An Arm Cortex-M4 microcontroller is a reduced-instruction-set processor for embedded control systems, combining a 32-bit architecture, hardware integer and floating-point processing, deterministic peripherals, and low-power operation. The XMC4800 belongs to the broader hierarchy of microcontroller, embedded processor, real-time control IC, and industrial automation semiconductor.

Principal features include a 144 MHz Cortex-M4 core, 2 MB of flash, 352 kB of RAM, and integrated 10/100 Mbit/s Ethernet. The EtherCAT node supports high-speed industrial fieldbus communication without requiring a separate communications ASIC. A rich set of timers, communication interfaces, analog peripherals, and general-purpose I/O makes the device suitable for machinery, motion control, PLC modules, robotics, and distributed automation controllers.

The XMC4800-F144K2048AAXQMA1 uses a 3.3 V supply, with the documented operating supply range extending from 3.13 V to 3.63 V. Its 144-pin LQFP footprint exposes substantially more I/O than smaller microcontroller packages. The exposed thermal pad assists heat transfer through the PCB, although final junction temperature depends on copper area, airflow, ambient temperature, switching activity, and the selected I/O configuration.

Typical deployments include EtherCAT servo drives, industrial Ethernet controllers, programmable automation equipment, sensor-hub controllers, and compact machine-control modules. The 144 MHz processing rate supports responsive control loops, while the integrated EtherCAT interface reduces board area and software complexity for cyclic fieldbus communication.

For a new design, reserve the exposed pad as a thermal and electrical ground connection, follow the manufacturer's pin and land-pattern guidance, and validate power sequencing, bus termination, and signal integrity on a production-intent board. Firmware should also include watchdog recovery, safe-state outputs, and communication supervision for industrial equipment.

This page combines manufacturer specifications, ordering information, practical design guidance, and clearly qualified same-brand replacement options. Review the manufacturer datasheet and reference manual before finalizing the PCB, clock, memory, EtherCAT, and safety-critical implementation.

Alternativas directas para XMC4800-F144K2048AAXQMA1 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

XMC4800-F144K2048-AA

✅ Sustitución directa
📦 PG-LQFP-144-24
Base ordering code retains 144 MHz operation, 2 MB flash, and the 144-pin package; qualification and packing suffixes must be reconciled before substitution.

📋 Alternativa de referencia (no en el catálogo)

XMC4800F144K2048AAXQMA1

✅ Sustitución directa
📦 PG-LQFP-144-24
Ordering-code punctuation differs from the target, while the identified electrical headline ratings remain 144 MHz and 2 MB flash in the same 144-pin package.

📋 Alternativa de referencia (no en el catálogo)

XMC4800F144F2048AAXQMA1

✅ Sustitución directa
📦 PG-LQFP-144-24
Uses the F2048 flash ordering designation rather than K2048; the identified 144 MHz frequency and 2 MB flash capacity are unchanged.

📋 Alternativa de referencia (no en el catálogo)

XMC4800-F144K2048AAXQMA1 Valores máximos y características eléctricas

Product Type 32-bit industrial Arm Cortex-M4 microcontroller
CPU Core Arm Cortex-M4
CPU Architecture 32 bit
Maximum CPU Frequency 144 MHz
Flash Memory 2048 kB (2 MB)
Flash Organization 2M x 8 bit
RAM 352 kB
Supply Voltage Range 3.13 V to 3.63 V
Nominal Supply Voltage 3.3 V
Ethernet Data Rate 10 Mbit/s and 100 Mbit/s
Fieldbus Support Integrated EtherCAT node
Encapsulado PG-LQFP-144-24
Package Dimensions 20 mm x 20 mm
Exposed Pad Yes, thermal and electrical pad
Tipo de montaje Surface-mount LQFP

Guía de configuración de pines de XMC4800-F144K2048AAXQMA1 20 mm x 20 mm

Configuración de pines para XMC4800-F144K2048AAXQMA1 (encapsulado 20 mm x 20 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 20 mm x 20 mm para XMC4800-F144K2048AAXQMA1

No hay datos detallados de patillaje disponibles para XMC4800-F144K2048AAXQMA1.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XMC4800-F144K2048AAXQMA1 es adecuado para 6 aplicacións: EtherCAT Servo Drive Controller, Industrial PLC Communication Module, Industrial Robot Controller, Machine Vision Sensor Hub, Automotive CAN-Based Vehicle Control, Industrial Power-Supply Controller.

🏭

EtherCAT Servo Drive Controller

The XMC4800-F144K2048AAXQMA1 fits EtherCAT servo-drive controllers because its 144 MHz Arm Cortex-M4 core can execute real-time motor-control logic while the integrated EtherCAT node handles cyclic fieldbus traffic. The 2 MB flash provides room for motion-control code, parameter tables, and field-upgrade logic, while 352 kB of RAM supports control state and communication buffers. Its 144-pin LQFP package also exposes the timers and analog resources normally needed for position, current, and speed feedback. The principal design consideration is the exposed-pad thermal path: place adequate ground copper beneath the device, keep sensitive analog routing separated from switching nodes, and follow the manufacturer recommendations for EtherCAT PHY isolation and termination.

🔧

Industrial PLC Communication Module

The XMC4800-F144K2048AAXQMA1 is well suited to distributed PLC I/O because it combines a 144 MHz Cortex-M4 processor with integrated 10/100 Mbit/s Ethernet and EtherCAT. Firmware can use the high-performance core for protocol processing, diagnostics, and local I/O management rather than depending solely on a low-rate communications controller. Its 2 MB flash is sufficient for a bootloader, network configuration, application firmware, and update metadata. The 144-pin package offers more external interface options than compact microcontroller packages. For dependable operation, isolate Ethernet routing from motor and relay traces, implement a hardware or software watchdog, and design recoverable communication states so a fieldbus interruption does not produce unsafe actuator commands.

🏭

Industrial Robot Controller

The XMC4800-F144K2048AAXQMA1 supports compact industrial robot controllers where deterministic processing and deterministic Ethernet communication are both valuable. At 144 MHz, the Cortex-M4 core can coordinate motion state, sensor processing, fault management, and EtherCAT cyclic tasks. Its 352 kB RAM allows meaningful working buffers without forcing all data into flash, while the 2 MB program area can hold control firmware and configuration storage. The large 144-pin package provides access to multiple timers, communications, and mixed-signal functions. Engineers should use the timer and communication resources according to the manufacturer peripheral matrix, validate timing margin at the highest interrupt load, and treat watchdog recovery and safe actuator disable as mandatory parts of the safety design.

📷

Machine Vision Sensor Hub

The XMC4800-F144K2048AAXQMA1 can serve as a machine-vision sensor hub when local preprocessing and network transport must coexist with real-time machine control. The 144 MHz Cortex-M4 core can process sensor status, perform filtering, and manage buffered image-related metadata, while the integrated Ethernet and EtherCAT interfaces provide links to industrial infrastructure. The 2 MB flash accommodates embedded firmware and configuration data, and the 144-pin LQFP package provides a broad selection of general-purpose I/O. Because a vision system may combine high-speed data and sensitive analog measurements, place analog sections away from Ethernet and switching-power paths, provide local decoupling at supply pins, and verify timing and thermal performance with the intended sensor and storage peripherals operating simultaneously.

🚗

Automotive CAN-Based Vehicle Control

The XMC4800-F144K2048AAXQMA1 can support CAN-oriented vehicle-control modules where a 144 MHz 32-bit processor, 2 MB flash, and extensive I/O are useful. The Cortex-M4 core can execute state-machine and diagnostics logic, while the 144-pin package exposes numerous communication and general-purpose pins. The integrated Ethernet capability also allows a gateway or diagnostic controller to bridge vehicle networks to industrial or test equipment. Before using the device in an automotive end product, confirm the exact temperature grade, automotive qualification status, functional-safety requirements, and operating lifetime in the manufacturer ordering documentation. PCB design should include transient protection, stable reference clocks, robust power sequencing, and a defined strategy for safe operation after reset or communications failure.

⚡

Industrial Power-Supply Controller

The XMC4800-F144K2048AAXQMA1 can supervise a complex industrial power-conversion subsystem where control, telemetry, and fieldbus communication must share one controller. Its 144 MHz Cortex-M4 core can execute supervisory loops, fault logging, parameter updates, and communication stacks, while 2 MB flash provides room for firmware and configuration parameters. The integrated Ethernet or EtherCAT connection can expose measurements and control commands to a supervisory controller. The device should be used only where its analog, timer, and communication resources meet the power-stage requirements. Keep switching nodes and high-current paths separated from control traces, connect the exposed pad to the intended thermal and ground plane, and validate regulation accuracy, fault response, and safe-state behavior under worst-case line and load transients.

What are the key specifications of XMC4800-F144K2048AAXQMA1 that engineers should know?
The XMC4800-F144K2048AAXQMA1 combines a 144 MHz Arm Cortex-M4 core, 2 MB of flash, 352 kB of RAM, integrated 10/100 Mbit/s Ethernet, and an on-chip EtherCAT node. It operates from a 3.13 V to 3.63 V supply and is housed in a 144-pin PG-LQFP-24 package with an exposed pad. According to the manufacturer datasheet, the device is intended for industrial automation and real-time embedded control.
Where can I download the XMC4800-F144K2048AAXQMA1 datasheet PDF?
The official XMC4800-F144K2048-AA manufacturer product page provides the primary datasheet, parameters, and ordering information for the XMC4800-F144K2048AAXQMA1. Use that page to obtain the current PDF and supporting documents. The manufacturer datasheet is the controlling reference for the complete 144-pin assignment, electrical limits, EtherCAT characteristics, memory map, and recommended application circuit.
Where can I find the XMC4800-F144K2048AAXQMA1 pinout?
The complete XMC4800-F144K2048AAXQMA1 pin assignment is located in the pin-description table of the manufacturer datasheet and reference manual. The device uses a PG-LQFP-144-24 package with an exposed pad, so the exposed-pad connection and all 144 terminal numbers must be checked against the package drawing before PCB routing. Use the manufacturer pin-description table when assigning every power, ground, analog, communications, and debug connection.
What is the XMC4800-F144K2048AAXQMA1 used for?
The XMC4800-F144K2048AAXQMA1 is used for industrial automation, motion control, PLC communication, robotics, and EtherCAT-connected equipment. Its 144 MHz Cortex-M4 core provides deterministic processing capacity, while the integrated EtherCAT node and 10/100 Mbit/s Ethernet support cyclic fieldbus communication. According to the manufacturer product page, the device is an industrial 32-bit microcontroller with 2 MB of flash.
Does the XMC4800-F144K2048AAXQMA1 include EtherCAT?
Yes, the XMC4800-F144K2048AAXQMA1 includes an integrated EtherCAT node and 10/100 Mbit/s Ethernet connectivity. This integration removes the need for a separate EtherCAT communication ASIC in suitable designs and reduces board complexity. The manufacturer product page identifies the XMC4800-F144K2048-AA as an industrial Arm Cortex-M4 MCU with EtherCAT and 10/100 Mbit/s Ethernet.
What is the supply voltage of XMC4800-F144K2048AAXQMA1?
The XMC4800-F144K2048AAXQMA1 operates from 3.13 V to 3.63 V, with 3.3 V as the nominal supply voltage. The manufacturer documentation identifies the device as a 3.3 V industrial microcontroller. Power-supply design should account for startup, Ethernet transceiver requirements, load transients, and the voltage limits associated with all connected I/O rather than designing only around the nominal supply.
Is XMC4800-F144K2048AAXQMA1 suitable for industrial automation?
Yes, the XMC4800-F144K2048AAXQMA1 is specifically identified by the manufacturer as an industrial microcontroller. Its 144 MHz Cortex-M4 core, 352 kB RAM, 2 MB flash, integrated Ethernet, and EtherCAT node support real-time industrial equipment. Suitability still depends on the required temperature grade, functional-safety strategy, peripheral coverage, qualification requirements, and operating-environment limits.
Where can I buy XMC4800-F144K2048AAXQMA1 online?
Use the Request a Quote form on this page to ask for XMC4800-F144K2048AAXQMA1 availability, current lead time, minimum order quantity, and shipment options. The exact orderable MPN is XMC4800-F144K2048AAXQMA1, and a manufacturer product-page search must be used to avoid confusing it with the F2048 ordering variant. Confirm the package suffix and attached development-board markings before authorizing procurement.
What is the price of XMC4800-F144K2048AAXQMA1?
Current commercial terms for XMC4800-F144K2048AAXQMA1 are obtained through the Request a Quote form on this page. The form allows an engineer to specify quantity, target date, shipment destination, and whether reels, trays, or another approved delivery format are required. This avoids relying on a stale unit price while preserving the exact 144-pin industrial ordering code in the request.
Is XMC4800-F144K2048AAXQMA1 in stock and what is its lead time?
Current inventory and lead time for XMC4800-F144K2048AAXQMA1 should be confirmed through the Request a Quote form on this page. Include your required quantity and production schedule so XAIPART can respond with an accurate allocation proposal. Because this is a 144-pin industrial microcontroller with an exposed thermal pad, confirm that the approved package, order code, and delivery format are unchanged before releasing a purchase order.
What is the best drop-in replacement for XMC4800-F144K2048AAXQMA1?
The closest qualified same-brand options are XMC4800-F144K2048-AA, XMC4800F144K2048AAXQMA1, and XMC4800F144F2048AAXQMA1 because they use the same XMC4800 144-pin LQFP family and retain the 144 MHz Cortex-M4 and 2 MB flash architecture. No cross-brand drop-in replacement with verified pin compatibility was identified. Review ordering codes, temperature grades, qualification, and firmware compatibility before substitution.
Can XMC4800-F144K2048-AA replace XMC4800-F144K2048AAXQMA1?
The XMC4800-F144K2048-AA is the closest base-device alternative because both belong to the same 144 MHz, 2 MB XMC4800 family and use the 144-pin LQFP package. It can serve as a board-level replacement only after the manufacturer ordering-information table confirms that temperature grade, qualification, pin configuration, and production packing match the original XQMA1 order code. The complete ordering suffix must be reviewed before substitution.
What is the difference between XMC4800F144K2048AAXQMA1 and XMC4800F144F2048AAXQMA1?
Both devices are listed as 144 MHz, 2 MB, 144-pin XMC4800 microcontrollers with an Arm Cortex-M4 core and EtherCAT-class industrial connectivity. Their visible ordering codes differ at the flash-designator position: K2048 versus F2048. The public snippets do not quantify the resulting silicon or qualification difference, so the manufacturer ordering guide must be checked before treating the F variant as an interchangeable production substitute.
When should I choose XMC4800-F144K2048AAXQMA1 over another industrial MCU?
Choose XMC4800-F144K2048AAXQMA1 when the design benefits from a 144 MHz Cortex-M4 core, 352 kB RAM, 2 MB flash, extensive 144-pin I/O, and an integrated EtherCAT node. It is particularly useful when eliminating a discrete fieldbus ASIC is valuable. Select another MCU when the system needs a smaller package, a different core ecosystem, lower cost, broader automotive qualification, or a peripheral set not provided by the XMC4800.
What design guidance is available for the XMC4800-F144K2048AAXQMA1 development board and EtherCAT hardware?
The manufacturer documentation and application materials should be used to define the XMC4800-F144K2048AAXQMA1 clock, debug interface, Ethernet PHY, EtherCAT physical interface, and exposed-pad layout. The official XMC4800 evaluation-board and development-board materials are appropriate starting points for high-speed layout. Keep Ethernet and EtherCAT differential routes impedance-controlled, provide the required termination, and validate the complete power tree under Ethernet traffic and maximum peripheral load.

Datos de referencia de ingeniería para XMC4800-F144K2048AAXQMA1 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose XMC4800-F144K2048AAXQMA1 for industrial EtherCAT equipment that needs a 144 MHz Cortex-M4 core, 2 MB flash, 352 kB RAM, integrated Ethernet, and a high pin count. Its integrated fieldbus node can simplify a servo-drive, PLC communication, or automation-controller design compared with an MCU that requires a separate communication ASIC. Choose the base XMC4800-F144K2048-AA ordering form only after confirming every qualification and packing suffix. Treat XMC4800F144F2048AAXQMA1 as a qualified candidate only after the manufacturer ordering guide resolves the F-versus-K flash designation. No cross-brand part with verified footprint, peripheral, timing, and EtherCAT compatibility was identified. For a new design, prioritize the native EtherCAT capability; for a redesign, confirm firmware dependencies, temperature grade, qualification, and exposed-pad layout before changing the installed order code.

Comparación con alternativas

Parámetro Este producto XMC4800-F144K2048-AA XMC4800F144K2048AAXQMA1 XMC4800F144F2048AAXQMA1
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package PG-LQFP-144-24 PG-LQFP-144-24 - same package PG-LQFP-144-24 - same package PG-LQFP-144-24 - same package
CPU Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
CPU Architecture 32 bit 32 bit 32 bit 32 bit
Maximum CPU Frequency 144 MHz 144 MHz 144 MHz 144 MHz
Flash Memory 2 MB 2048 kB 2 MB 2 MB

Diferenciadores clave

  • Combines a high-performance Cortex-M4 core with fieldbus integration (frente a XMC4800F144F2048AAXQMA1)
  • High RAM capacity for industrial control workloads (frente a XMC4800-F144K2048-AA)
  • Broad 144-pin integration reduces external I/O expansion (frente a XMC4800F144K2048AAXQMA1)

Notas de diseño

Treat the exposed pad as the primary thermal path for the PG-LQFP-144-24 device. Connect it to the intended ground plane using the manufacturer land pattern, minimize thermal-via resistance, and provide copper area beyond the pad footprint where layout rules allow. Estimate junction temperature from actual power dissipation and the board-specific thermal resistance rather than relying only on the package rating. Validate the final assembly at maximum ambient temperature with Ethernet traffic, timers, analog blocks, and external loads active.

Implement the manufacturer reference layout for the 144-pin LQFP, including the exposed-pad geometry and pin-one orientation. Place local input and output decoupling capacitors adjacent to the relevant supply terminals, preserve a continuous ground reference beneath the device, and route high-speed clocks and communications away from switching nodes. Before release, compare the assembled PCB against the package drawing and manufacturer pin table; an incorrect exposed-pad connection or pin-one orientation can prevent programming or damage the device.

Use the manufacturer EtherCAT and Ethernet reference design as the basis for high-speed layout, clock generation, PHY selection, magnetic-device placement, and termination. Maintain the specified differential impedance, avoid stubs and unnecessary layer transitions, and keep return paths continuous. Validate eye quality and compliance on production-intent hardware because component placement, connector mechanics, and stackup can materially affect performance even when the schematic is unchanged.

Do not treat the XMC4800-F144K2048-AA base ordering code as automatically interchangeable with every XQMA1 suffix. Check temperature grade, qualification, production packing, and any suffix-defined characteristics before substitution. Likewise, verify the meaning of the K2048 and F2048 ordering positions rather than assuming they are electrically identical. Firmware, bootloader, and peripheral configuration should also be checked when moving between ordering variants or evaluating an exact replacement.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page and ordering information should be checked for the current declarations applicable to the exact XQMA1 ordering code.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

xmc4800 datasheet xmc4800 reference manual xmc4800 ethercat xmc4800 infineon xmc4800 evaluation board xmc4800 development board XMC4800-F144K2048AAXQMA1 datasheet XMC4800-F144K2048AAXQMA1 pinout XMC4800-F144K2048AAXQMA1 equivalent XMC4800-F144K2048AAXQMA1 replacement XMC4800-F144K2048AAXQMA1 price XMC4800-F144K2048AAXQMA1 stock XMC4800-F144K2048AAXQMA1 LQFP-144 xmc4800 automation board v3 xmc4800 relax kit

Componentes & términos relacionados

Infineon Technologies XMC4800-F144K2048AAXQMA1 XMC4800-F144K2048-AA XMC4800F144K2048AAXQMA1 XMC4800F144F2048AAXQMA1 XMC4000 Arm Cortex-M4 32-bit microcontroller industrial microcontroller embedded processor real-time control IC EtherCAT 10/100 Mbit/s Ethernet 2 MB flash memory 352 kB RAM PG-LQFP-144-24 LQFP exposed pad surface-mount package industrial automation motion control robotics PLC communication machine vision 3.3 V supply
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ