Z8673312PSC - 8-Bit 12MHz OTP MCU | Zilog
Teilenummer: Z8673312PSC ✓ AktivZ8673312PSC Übersicht
A one-time-programmable microcontroller is an embedded controller whose nonvolatile program memory can be written only once. Z8 microcontrollers occupy the 8-bit microprocessor segment within the broader embedded-control hierarchy: Z8 CPU core, 8-bit microcontroller, embedded controller, and semiconductor. OTP memory supports permanent firmware for appliance control, industrial modules, meters, keyboard controllers, and other compact products where field updates are unnecessary.
The Z8673312PSC combines a 12 MHz clock with 8 KB of OTP memory organized as 8K x 8 bits. Its 24 I/O ports provide direct digital interfaces for sensing inputs, driving indicators, controlling relays, and communicating with external logic. The listed operating supply range of 4.5 V to 5.5 V supports conventional 5 V embedded systems, while the 8-bit architecture simplifies timing, interrupt handling, and resource allocation in small control products.
The Z8 instruction set and dedicated microcontroller peripherals reduce the need for separate interface devices in compact applications. The processor coordinates timers, serial communication, and general-purpose I/O while OTP memory holds the final application program. Because the program is permanent after programming, field reconfiguration is not possible; firmware changes therefore require a new programmed device or a board-level substitution.
Typical uses include appliance timers, energy meters, temperature controllers, security keypads, motor-control interfaces, and dedicated instrumentation. The 12 MHz operating rate provides useful processing margin for event-driven control and periodic background tasks. The PDIP-28 package also supports prototype work and through-hole assembly, although its larger footprint makes the device less suitable for compact wearable products than newer surface-mount microcontrollers.
Designers should verify each port's multiplexed function, available interrupts, oscillator connection, reset behavior, and programming procedure in the Zilog product specification before assigning external circuitry. Because the memory is OTP, validate the complete firmware image and test limits before programming production units. Maintain a 4.5 V to 5.5 V supply and design the board to limit electrical noise on oscillator and I/O pins.
This product page combines core Z8673312PSC specifications, practical OTP design considerations, sourcing guidance, and pin-compatible Z8-family alternatives. It also highlights how memory permanence, operating voltage, package size, and peripheral differences affect replacement decisions, helping engineers determine whether an existing PDIP-28 control board can be reused without redesign.
Drop-in-Alternativen für Z8673312PSC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit Z8673312PSC (gleiche Bauform und Footprint) – abweichend in Microcontroller Type, Data Bus Width, Package, Program Memory Type, RoHS Status.
Z8673312PSG
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →Z86C9333PSG
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
Z86C9325PSG
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →Z86C9320PSG
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
Z86C9315PSG
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
Z8673312PSC Grenzwerte & elektrische Eigenschaften
| Microcontroller Type | 8-bit Z8 CMOS one-time-programmable microcontroller |
| Maximum Clock Speed | 12 MHz |
| Program Memory Type | 8 KB OTPROM |
| Program Memory Organization | 8K x 8 bits |
| Datenbusbreite | 8 bits |
| Supply Voltage Range | 4.5 V to 5.5 V |
| I/O Port Count | 24 ports |
| Gehäuse | PDIP-28 |
| Montageart | Through-hole |
| Device Lifecycle Stage | Active |
| Operating Maximum Frequency | 12 MHz |
| RoHS-Status | Non-compliant |
Z8673312PSC pdip-28 Pinbelegungsleitfaden
Pinbelegung für Z8673312PSC (pdip-28-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für Z8673312PSC.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
Z8673312PSC ist geeignet für 6 Anwendungs: Appliance Control, Energy Metering, Temperature Controller, Security Keypad Controller, Motor and Relay Interface, Dedicated Instrumentation.
Appliance Control
The Z8673312PSC fits appliance-control boards that require permanent control firmware, real-time state handling, and several external signals. Its 12 MHz Z8 core can coordinate button inputs, timer events, relay outputs, and status indicators, while 8 KB of OTP memory holds the final application program. The 4.5 V to 5.5 V supply range also aligns with common appliance electronics. Because OTP memory cannot be updated in the field, validate the complete firmware and all operating modes before programming production units. The PDIP-28 package is particularly practical for serviceable products, test fixtures, and boards assembled by teams that favor through-hole insertion.
Empfohlen
Energy Metering
The Z8673312PSC can support a dedicated metering controller by combining an 12 MHz processing clock with 24 I/O ports for pulse inputs, display-control signals, alarm outputs, and communication interfaces. Its 8 KB OTP architecture is appropriate for permanent measurement, calibration, and anti-tamper logic in a fixed appliance. The 4.5 V to 5.5 V operating range supports regulated 5 V meter electronics. Engineers should partition interrupt-driven capture from background display processing and verify timer accuracy, input thresholds, and oscillator tolerance in the Zilog product specification before production release.
Empfohlen
Temperature Controller
The Z8673312PSC is well suited to temperature-control panels that measure a sensor, drive a display, operate a keypad, and switch a heater or cooling output. Its 24 I/O ports reduce the need for external interface ICs, while the 12 MHz clock provides useful scheduling margin for periodic sampling, filtering, display updates, and control-state transitions. The 8 KB OTP program memory is useful when operating code must remain immutable after manufacturing. Confirm the device's timer and port multiplexing requirements, then add suitable protection around inductive heater relays and externally connected sensor wiring.
Empfohlen
Security Keypad Controller
The Z8673312PSC can implement a dedicated access-control keypad using its 8-bit architecture, 12 MHz clock, and 24 I/O ports for matrix scanning, lock control, status indication, and alarm signaling. Eight KB of OTP memory is suitable for permanent firmware containing keypad logic and fixed communication protocols. The 4.5 V to 5.5 V supply range supports common controller rails. For a security product, program a validated image, protect the device from unauthorized reprogramming attempts, and use latching or battery-backed support circuitry where the product specification and application requirements call for it.
Empfohlen
Motor and Relay Interface
The Z8673312PSC can serve as the sequencing controller for relays, solenoids, small motors, and status lamps in compact industrial equipment. Its 12 MHz processing rate supports interrupt-based input monitoring and deterministic output sequencing, while 24 I/O ports provide ample connections for sensors, switches, and actuator drives. The PDIP-28 package simplifies through-hole assembly and prototype revisions. OTP memory prevents accidental firmware changes in the field, which can help lock validated sequencing logic into production units. Include driver transistors, flyback protection, and appropriate isolation between the MCU and inductive loads.
Empfohlen
Dedicated Instrumentation
The Z8673312PSC can act as the central controller in dedicated laboratory, process, or test equipment where the product needs fixed acquisition and control behavior. The 8-bit bus and 24 I/O ports can connect digital sensors, front-panel controls, display signals, and communication circuitry, while the 12 MHz clock provides processing margin for sampling and control routines. Its 8 KB OTP memory avoids external nonvolatile storage when firmware changes are not expected. Validate timing margins, interrupt priorities, and analog-interface requirements before committing to the device, especially where measurement accuracy depends on stable references and careful grounding.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für Z8673312PSC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | Z8673312PSG | Z86C9333PSG | Z86C9325PSG | Z86C9320PSG | Z86C9315PSG |
|---|---|---|---|---|---|---|
| Package | PDIP-28 | PDIP-28 | PDIP-28 | PDIP-28 | PDIP-28 | PDIP-28 |
| Brand | Zilog | Zilog | Zilog | Zilog | Zilog | Zilog |
| Architecture | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 |
| Maximum Clock Speed | 12 MHz | 12 MHz | 12 MHz | 12 MHz | 12 MHz | 12 MHz |
| Program Memory | 8 KB OTPROM | 8 KB OTPROM | 8 KB OTPROM | 8 KB OTPROM | 8 KB OTPROM | 8 KB OTPROM |
| Memory Organization | 8K x 8 bits | 8K x 8 bits | 8K x 8 bits | 8K x 8 bits | 8K x 8 bits | 8K x 8 bits |
| Data Bus Width | 8 bits | 8 bits | 8 bits | 8 bits | 8 bits | 8 bits |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Program Memory Type | One-time programmable | One-time programmable | One-time programmable | One-time programmable | One-time programmable | One-time programmable |
| Special Features | 24 I/O ports | 24 I/O ports | Family-specific peripheral configuration | Family-specific timer and peripheral configuration | Family-specific port and peripheral configuration | Family-specific port and peripheral configuration |
Wichtigste Unterscheidungsmerkmale
- Direct temperature-grade counterpart (vs. Z8673312PSG)
- Same-family path for existing Z8 boards (vs. Z86C9333PSG)
- Four-byte-wide application interface (vs. COP8SGR728N8)
- Purpose-built permanent-firmware architecture (vs. ATMEGA32-16AU)
Designhinweise
Treat OTP programming as a one-time production event. Generate a complete, checksummed firmware image, test it on engineering-grade devices, and validate every interrupt, timer, port, and power-state path before programming production units. A failed OTP program cannot be repaired by erasing the device, so rejected programming consumes the MCU and can interrupt assembly schedules.
Design the Z8673312PSC supply rail for the specified 4.5 V to 5.5 V range and place the required bypass capacitor close to the device supply pins. Account for startup and I/O transition currents in the regulator design. External loads on port pins should not be allowed to pull the device supply outside its operating limits, particularly when multiple outputs change state simultaneously.
Use the manufacturer's PDIP-28 pin-description and land-pattern information for PCB routing. Keep oscillator traces short and away from switching nodes, route reset with suitable pull-up or reset-network components, and provide clean ground connections for digital I/O. The through-hole package is forgiving for prototypes, but production layouts should still preserve adequate spacing between adjacent nets and exposed component leads.
A PDIP-28 package match does not by itself establish software compatibility among Z8 controllers. Before substituting a device, compare the pin table, interrupt-vector locations, timer registers, serial-interface pins, port-control bits, reset behavior, oscillator limits, and memory map. For OTP devices, also verify that the replacement has sufficient program memory and that the existing firmware image can be used without modification.
Compliance-Informationen
The RoHS status is reported as non-compliant in the GlobalSpec component record. REACH, halogen-free, conflict-minerals, and lead-free status are not established by the cited technical records.