Zilog

Z8673312PSC - 8-Bit 12MHz OTP MCU | Zilog

MPN: Z8673312PSC ✓ פעיל
4.5 V to 5.5 V Vdss PDIP-28 Package 12 MHz Speed 8 KB OTPROM Memory
כמות הזמנה מינימלית: 1 |

Z8673312PSC סקירה

The Zilog Z8673312PSC is an 8-bit Z8 CMOS one-time-programmable microcontroller operating at 12 MHz, with 8 KB of OTP program memory, an 8-bit data bus, and a PDIP-28 package. The device is designed for embedded control applications requiring a compact processor, dedicated I/O, and factory-programmed or application-specific control logic without external firmware storage.

A one-time-programmable microcontroller is an embedded controller whose nonvolatile program memory can be written only once. Z8 microcontrollers occupy the 8-bit microprocessor segment within the broader embedded-control hierarchy: Z8 CPU core, 8-bit microcontroller, embedded controller, and semiconductor. OTP memory supports permanent firmware for appliance control, industrial modules, meters, keyboard controllers, and other compact products where field updates are unnecessary.

The Z8673312PSC combines a 12 MHz clock with 8 KB of OTP memory organized as 8K x 8 bits. Its 24 I/O ports provide direct digital interfaces for sensing inputs, driving indicators, controlling relays, and communicating with external logic. The listed operating supply range of 4.5 V to 5.5 V supports conventional 5 V embedded systems, while the 8-bit architecture simplifies timing, interrupt handling, and resource allocation in small control products.

The Z8 instruction set and dedicated microcontroller peripherals reduce the need for separate interface devices in compact applications. The processor coordinates timers, serial communication, and general-purpose I/O while OTP memory holds the final application program. Because the program is permanent after programming, field reconfiguration is not possible; firmware changes therefore require a new programmed device or a board-level substitution.

Typical uses include appliance timers, energy meters, temperature controllers, security keypads, motor-control interfaces, and dedicated instrumentation. The 12 MHz operating rate provides useful processing margin for event-driven control and periodic background tasks. The PDIP-28 package also supports prototype work and through-hole assembly, although its larger footprint makes the device less suitable for compact wearable products than newer surface-mount microcontrollers.

Designers should verify each port's multiplexed function, available interrupts, oscillator connection, reset behavior, and programming procedure in the Zilog product specification before assigning external circuitry. Because the memory is OTP, validate the complete firmware image and test limits before programming production units. Maintain a 4.5 V to 5.5 V supply and design the board to limit electrical noise on oscillator and I/O pins.

This product page combines core Z8673312PSC specifications, practical OTP design considerations, sourcing guidance, and pin-compatible Z8-family alternatives. It also highlights how memory permanence, operating voltage, package size, and peripheral differences affect replacement decisions, helping engineers determine whether an existing PDIP-28 control board can be reused without redesign.

חלופות תחליף ישיר עבור Z8673312PSC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם Z8673312PSC (אותו גורם צורה וטביעת רגל) — שונים ב Microcontroller Type, Data Bus Width, Package, Program Memory Type, RoHS Status.

Zilog
Microcontroller Type: 8-bit Z8 microcontroller
Program Memory Type: One-time-programmable (OTP) memory
השווה עם Z8673312PSC →
Zilog
Microcontroller Type: 8-bit ROMless microcontroller
Data Bus Width: 8-bit
Package: 40-pin DIP
השווה עם Z8673312PSC →

Z8673312PSG

✅ Drop-In
Zilog
📦 PDIP-28
8-bit Z8 microcontroller · Z8 8-bit CISC · 12 MHz · One-time-programmable (OTP) memory · 8 KB (8K x 8) · 8K x 8 bits · CMOS · 28-pin DIP

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

Z86C9333PSG

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 PDIP-28
12 MHz clock and 8 KB OTP capacity match 0% difference; peripheral configuration differs

📋 חלופה להתייחסות (לא בקטלוג)

Z86C9325PSG

✅ Drop-In ⚠️ מפרטים לא מאומתים
Zilog
📦 PDIP-28
8-bit ROMless microcontroller · Z8 8-bit MCU · 25 MHz · 236 x 8 bytes · ROMless with external program memory · 24 I/O pins · 3 V to 5.5 V · EBI/EMI

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

Z86C9320PSG

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 PDIP-28
12 MHz clock and 8 KB OTP capacity match 0% difference; available peripheral resources differ

📋 חלופה להתייחסות (לא בקטלוג)

Z86C9315PSG

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 PDIP-28
12 MHz clock and 8 KB OTP capacity match 0% difference; port and peripheral assignments differ

📋 חלופה להתייחסות (לא בקטלוג)

Z8673312PSC דירוגים מרביים ומאפיינים חשמליים

Microcontroller Type 8-bit Z8 CMOS one-time-programmable microcontroller
Maximum Clock Speed 12 MHz
Program Memory Type 8 KB OTPROM
Program Memory Organization 8K x 8 bits
רוחב אפיק נתונים 8 bits
Supply Voltage Range 4.5 V to 5.5 V
I/O Port Count 24 ports
מארז PDIP-28
סוג הרכבה Through-hole
Device Lifecycle Stage Active
Operating Maximum Frequency 12 MHz
סטטוס RoHS Non-compliant

מדריך תצורת פינים של Z8673312PSC pdip-28

תצורת פינים עבור Z8673312PSC (מארזת pdip-28). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת pdip-28 עבור Z8673312PSC

אין נתוני פריסת פינים מפורטים עבור Z8673312PSC.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

Z8673312PSC מתאים עבור 6 יישוםs: Appliance Control, Energy Metering, Temperature Controller, Security Keypad Controller, Motor and Relay Interface, Dedicated Instrumentation.

🏭

Appliance Control

The Z8673312PSC fits appliance-control boards that require permanent control firmware, real-time state handling, and several external signals. Its 12 MHz Z8 core can coordinate button inputs, timer events, relay outputs, and status indicators, while 8 KB of OTP memory holds the final application program. The 4.5 V to 5.5 V supply range also aligns with common appliance electronics. Because OTP memory cannot be updated in the field, validate the complete firmware and all operating modes before programming production units. The PDIP-28 package is particularly practical for serviceable products, test fixtures, and boards assembled by teams that favor through-hole insertion.

⚡

Energy Metering

The Z8673312PSC can support a dedicated metering controller by combining an 12 MHz processing clock with 24 I/O ports for pulse inputs, display-control signals, alarm outputs, and communication interfaces. Its 8 KB OTP architecture is appropriate for permanent measurement, calibration, and anti-tamper logic in a fixed appliance. The 4.5 V to 5.5 V operating range supports regulated 5 V meter electronics. Engineers should partition interrupt-driven capture from background display processing and verify timer accuracy, input thresholds, and oscillator tolerance in the Zilog product specification before production release.

🧩

Temperature Controller

The Z8673312PSC is well suited to temperature-control panels that measure a sensor, drive a display, operate a keypad, and switch a heater or cooling output. Its 24 I/O ports reduce the need for external interface ICs, while the 12 MHz clock provides useful scheduling margin for periodic sampling, filtering, display updates, and control-state transitions. The 8 KB OTP program memory is useful when operating code must remain immutable after manufacturing. Confirm the device's timer and port multiplexing requirements, then add suitable protection around inductive heater relays and externally connected sensor wiring.

🔒

Security Keypad Controller

The Z8673312PSC can implement a dedicated access-control keypad using its 8-bit architecture, 12 MHz clock, and 24 I/O ports for matrix scanning, lock control, status indication, and alarm signaling. Eight KB of OTP memory is suitable for permanent firmware containing keypad logic and fixed communication protocols. The 4.5 V to 5.5 V supply range supports common controller rails. For a security product, program a validated image, protect the device from unauthorized reprogramming attempts, and use latching or battery-backed support circuitry where the product specification and application requirements call for it.

🔧

Motor and Relay Interface

The Z8673312PSC can serve as the sequencing controller for relays, solenoids, small motors, and status lamps in compact industrial equipment. Its 12 MHz processing rate supports interrupt-based input monitoring and deterministic output sequencing, while 24 I/O ports provide ample connections for sensors, switches, and actuator drives. The PDIP-28 package simplifies through-hole assembly and prototype revisions. OTP memory prevents accidental firmware changes in the field, which can help lock validated sequencing logic into production units. Include driver transistors, flyback protection, and appropriate isolation between the MCU and inductive loads.

📟

Dedicated Instrumentation

The Z8673312PSC can act as the central controller in dedicated laboratory, process, or test equipment where the product needs fixed acquisition and control behavior. The 8-bit bus and 24 I/O ports can connect digital sensors, front-panel controls, display signals, and communication circuitry, while the 12 MHz clock provides processing margin for sampling and control routines. Its 8 KB OTP memory avoids external nonvolatile storage when firmware changes are not expected. Validate timing margins, interrupt priorities, and analog-interface requirements before committing to the device, especially where measurement accuracy depends on stable references and careful grounding.

What is the Z8673312PSC?
The Z8673312PSC is a Zilog 8-bit CMOS one-time-programmable microcontroller with a 12 MHz clock, 8 KB of OTP program memory, and 24 I/O ports in a PDIP-28 package. According to the Zilog product specification, it is based on the Z8 architecture and is intended for compact embedded-control systems using a 4.5 V to 5.5 V supply.
What are the key specifications of Z8673312PSC that engineers should know?
The key Z8673312PSC specifications are a 12 MHz maximum clock, 8 KB of one-time-programmable memory organized as 8K x 8 bits, an 8-bit data bus, 24 I/O ports, and a PDIP-28 package. The Zilog product specification identifies a 4.5 V to 5.5 V operating supply range, making the device suitable for conventional 5 V embedded-control boards.
Where can I download the Z8673312PSC datasheet PDF?
The Z8673312PSC datasheet is accessible through the Zilog product-specification document linked on this page. It contains the architectural overview, memory map, register descriptions, interrupt information, electrical characteristics, and package information for the Z8 CMOS OTP microcontroller family. Use the manufacturer document when defining PCB connections or programming the final firmware.
Where can I find the Z8673312PSC pinout?
The Z8673312PSC pin assignment is defined in the pin-description and package sections of the Zilog product specification for the 28-pin PDIP device. Use that table when assigning oscillator, reset, interrupt, port, and supply pins. The exact physical orientation and exposed-package drawing should also be checked against the selected package drawing before PCB routing.
Can Z8673312PSC be used for appliance control?
Yes, the Z8673312PSC is suitable for appliance control because it combines 12 MHz processing, 8 KB of OTP firmware storage, and 24 I/O ports in a 28-pin package. It can manage buttons, displays, relays, timers, and sensors while operating from a 4.5 V to 5.5 V supply. OTP permanence is particularly useful when the appliance does not require field firmware updates.
Is Z8673312PSC suitable for a 5 V embedded system?
The Z8673312PSC is suitable for a 5 V embedded system because its specified supply-voltage range is 4.5 V to 5.5 V. The device provides 24 I/O ports and an 8-bit bus in a PDIP-28 package. Designers should still verify individual pin current limits, peripheral timing, and port multiplexing in the Zilog product specification before finalizing the power distribution.
What is the difference between OTPROM and reprogrammable flash in Z8673312PSC?
The Z8673312PSC uses 8 KB of one-time-programmable memory, whereas reprogrammable flash can be erased and rewritten. OTP memory is appropriate for permanent product firmware, but a programming error or firmware revision cannot be corrected in the same device. This distinction materially changes production planning because each programmed MCU becomes dedicated to its firmware version.
What can replace the Z8673312PSC on the same 28-pin footprint?
Z8673312PSG is the closest temperature-grade counterpart of the Z8673312PSC, while several Z86C93-family PDIP-28 devices provide related 8-bit alternatives. Replacement requires exact confirmation of pin functions, interrupt mapping, timer resources, memory capacity, oscillator configuration, and voltage limits; a matching package alone does not guarantee firmware compatibility.
Is Z8673312PSC the same as Z8673312PSG?
The Z8673312PSG shares the Z86E33/Z86E34 OTP family identity, 8-bit architecture, 12 MHz class, 8 KB OTP configuration, and PDIP-28 format associated with the Z8673312PSC. The distinguishing detail is the device-grade suffix, so engineers should compare the exact temperature-range and qualification rows in the Zilog product specification before treating it as a drop-in replacement.
When should I choose Z8673312PSC instead of another 8-bit MCU?
Choose the Z8673312PSC when an existing board requires an 8-bit Z8 controller with 12 MHz operation, 8 KB of OTP memory, 24 I/O ports, and a PDIP-28 footprint. It is particularly suitable for permanent appliance, meter, keypad, or industrial-control firmware. Select a newer MCU when in-circuit updates, lower power, smaller size, or faster execution are primary requirements.
Z8673312PSC vs Z8673312PSG: which is the better replacement choice?
The Z8673312PSG is the more direct replacement candidate because it belongs to the same Z8 OTP family and retains the PDIP-28 format, 12 MHz operating class, and 8 KB OTP architecture. Selection should follow the manufacturer specification for temperature grade and qualification. If those rows match the installed device, the parts are technically closer than unrelated 8-bit microcontrollers.
What is the best cross-brand equivalent for Z8673312PSC?
No cross-brand equivalent can be declared drop-in solely from the technical data for the Z8673312PSC. A cross-brand replacement would need a PDIP-28 footprint with the same 4.5 V to 5.5 V supply, 12 MHz operating class, compatible port and interrupt assignments, and sufficient OTP memory. Request engineering review of any proposed substitute before changing the PCB or firmware.
Where to buy Z8673312PSC online?
Use the Request a Quote form on this page to ask for Z8673312PSC availability, lead time, and order quantities. The exact Z8673312PSC order code is Zilog Z8673312PSC in a PDIP-28 package. Provide your target quantity and required packaging details so the sourcing request can be matched to the correct programmed or unprogrammed device.
What is the lead time for Z8673312PSC?
Submit a Z8673312PSC sourcing request through the Request a Quote form on this page to confirm current lead time, minimum order quantity, and production scheduling. Because this device uses one-time-programmable memory, distinguish between an unprogrammed MCU and a unit programmed with your approved firmware image. Both device status and programming requirements can affect delivery planning.
Is Z8673312PSC in stock?
Current Z8673312PSC inventory is best confirmed through the Request a Quote form on this page. State the quantity, unprogrammed or programmed status, and required delivery timing. Because OTP devices may be programmed to a customer-specific firmware image, conventional catalog-stock assumptions do not guarantee that a unit can satisfy the final programmed build.

נתוני עזר הנדסיים עבור Z8673312PSC — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the Z8673312PSC when maintaining an existing 5 V, 28-pin through-hole control board that uses a Z8 microcontroller with 12 MHz operation and 8 KB of OTP memory. Its permanent program memory is well suited to fixed appliance, meter, keypad, and industrial-control firmware, but it is unsuitable when field updates are required. Z8673312PSG is the closest alternative for a grade-specific substitution; confirm its temperature range and qualification before ordering. The Z86C9333PSG, Z86C9325PSG, Z86C9320PSG, and Z86C9315PSG alternatives preserve the core clock, memory class, and PDIP-28 format, but their timer, port, interrupt, and peripheral configurations require line-by-line comparison with the installed device. Choose a modern MCU when smaller size, lower power, reprogrammable flash, or greater processing performance is more important than preserving the legacy board.

השוואה עם חלופות

פרמטר מוצר זה Z8673312PSG Z86C9333PSG Z86C9325PSG Z86C9320PSG Z86C9315PSG
Package PDIP-28 PDIP-28 PDIP-28 PDIP-28 PDIP-28 PDIP-28
Brand Zilog Zilog Zilog Zilog Zilog Zilog
Architecture 8-bit Z8 8-bit Z8 8-bit Z8 8-bit Z8 8-bit Z8 8-bit Z8
Maximum Clock Speed 12 MHz 12 MHz 12 MHz 12 MHz 12 MHz 12 MHz
Program Memory 8 KB OTPROM 8 KB OTPROM 8 KB OTPROM 8 KB OTPROM 8 KB OTPROM 8 KB OTPROM
Memory Organization 8K x 8 bits 8K x 8 bits 8K x 8 bits 8K x 8 bits 8K x 8 bits 8K x 8 bits
Data Bus Width 8 bits 8 bits 8 bits 8 bits 8 bits 8 bits
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Program Memory Type One-time programmable One-time programmable One-time programmable One-time programmable One-time programmable One-time programmable
Special Features 24 I/O ports 24 I/O ports Family-specific peripheral configuration Family-specific timer and peripheral configuration Family-specific port and peripheral configuration Family-specific port and peripheral configuration

מבדילים עיקריים

  • Direct temperature-grade counterpart (לעומתZ8673312PSG)
  • Same-family path for existing Z8 boards (לעומתZ86C9333PSG)
  • Four-byte-wide application interface (לעומתCOP8SGR728N8)
  • Purpose-built permanent-firmware architecture (לעומתATMEGA32-16AU)

הערות תכנון

Treat OTP programming as a one-time production event. Generate a complete, checksummed firmware image, test it on engineering-grade devices, and validate every interrupt, timer, port, and power-state path before programming production units. A failed OTP program cannot be repaired by erasing the device, so rejected programming consumes the MCU and can interrupt assembly schedules.

Design the Z8673312PSC supply rail for the specified 4.5 V to 5.5 V range and place the required bypass capacitor close to the device supply pins. Account for startup and I/O transition currents in the regulator design. External loads on port pins should not be allowed to pull the device supply outside its operating limits, particularly when multiple outputs change state simultaneously.

Use the manufacturer's PDIP-28 pin-description and land-pattern information for PCB routing. Keep oscillator traces short and away from switching nodes, route reset with suitable pull-up or reset-network components, and provide clean ground connections for digital I/O. The through-hole package is forgiving for prototypes, but production layouts should still preserve adequate spacing between adjacent nets and exposed component leads.

A PDIP-28 package match does not by itself establish software compatibility among Z8 controllers. Before substituting a device, compare the pin table, interrupt-vector locations, timer registers, serial-interface pins, port-control bits, reset behavior, oscillator limits, and memory map. For OTP devices, also verify that the replacement has sufficient program memory and that the existing firmware image can be used without modification.

מידע על תאימות

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The RoHS status is reported as non-compliant in the GlobalSpec component record. REACH, halogen-free, conflict-minerals, and lead-free status are not established by the cited technical records.

הנתונים אומתו בתאריך: 2026-11-17 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

Z8673312PSC datasheet Z8673312PSC specifications Z8673312PSC pinout Z8673312PSC datasheet pdf Z8673312PSC replacement Z8673312PSC equivalent Z8673312PSG vs Z8673312PSC Z8673312PSC footprint Z8673312PSC price Z8673312PSC stock Zilog Z8673312PSC Z8673312PSD vs Z8673312PSC

רכיבים ומונחים קשורים

Zilog Z8673312PSC Z8673312PSG Z86C9333PSG Z86C9325PSG Z86C9320PSG Z86C9315PSG Z8 architecture 8-bit microcontroller CMOS microcontroller one-time-programmable memory OTPROM embedded controller semiconductor 12 MHz clock 8-bit data bus 24 I/O ports 4.5 V to 5.5 V power supply PDIP-28 DIP package family through-hole mounting appliance control energy metering temperature control RoHS
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר