Circuitos integrados

PIC16F1709-E/SS

PIC16F1709-E/SS - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1709-E/SS is an 8-bit PIC microcontroller (MCU) from the PIC16F170X/171X family that combines Intelligent Analog integration with extreme low power (XLP) technology. The device delivers a 32 MHz maximum CPU clock, 14 KB (8K x 14 words) of self-programmable Flash program memory, 1024 bytes of SRAM, and 256 bytes of EEPROM, all housed in a 20-pin SSOP (Shrink Small Outline Package). It operates across a wide 2.3 V to 5.5 V supply range, making it suitable for both 3.3 V and 5 V designs, and supports industrial extended temperature from -40 °C to +125 °C. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), and a set of peripherals such as timers, communication interfaces, and analog blocks. The PIC16F1709 belongs to the 8-bit PIC® microcontrollers family, which sits within the broader hierarchy of microcontrollers -> embedded processors -> semiconductor ICs. Its enhanced mid-range core uses a 14-bit instruction word and a 16-level hardware stack, providing deterministic interrupt response and low active current. Key features include two on-chip operational amplifiers, a 10-bit ADC with up to 12 channels, a 5-bit/10-bit DAC, two 8-bit timers and one 16-bit timer, enhanced PWM with four outputs, and Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), Zero Cross Detect (ZCD), and Peripheral Pin Select (PPS). These features let designers implement sensor conditioning, power-factor correction, lighting control, and signal generation with minimal external components. Typical applications include LED lighting drivers, battery chargers, smart sensors, IoT edge nodes, and consumer appliance control panels. The XLP deep-sleep current of typically < 50 nA with retention enables multi-year coin-cell operation for remote wireless sensor nodes and metering. When designing with this MCU, ensure the ICSP programming header does not interfere with PPS remapped peripherals and leave the ZCD pin floating when unused to avoid spurious triggers. Always confirm that the chosen SSOP footprint is the 5.30 mm body variant. This page synthesizes distributor pricing, drop-in alternative listings, and practical design notes that are not available in the manufacturer datasheet alone, giving procurement and design engineers a single reference for evaluation.

Cotización Contacto

PIC16F1709-I/ML

PIC16F1709-I/ML - 8-bit MCU, 14KB Flash, 32MHz, 20-QFN | Microchip

The Microchip Technology PIC16F1709-I/ML is a 8-bit PIC microcontroller with 14KB Flash program memory, 1024 bytes RAM, and 32MHz internal oscillator in a 20-pin QFN (4x4 mm) package. The device integrates Intelligent Analog peripherals including on-chip op amps, a 10-bit ADC, an 8-bit DAC, high-speed comparator, zero-cross detect, configurable logic cell (CLC), complementary output generator (COG), and Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and programmable I/O peripherals. The PIC16 family uses a RISC Harvard architecture with 14-bit instructions and 200 ns instruction execution. Within the broader MCU taxonomy, the PIC16F1709 belongs to the enhanced mid-range PIC16(L)F170X/171X series that emphasizes cost-effective analog integration, sitting between baseline PIC10/12/16F and the higher-pin PIC18/dsPIC families. Key features include eXtreme Low Power (XLP) technology with sub-1 µA sleep currents, 4x 10-bit ADC channels up to 100 ksps, 1x 8-bit DAC, 2x op amps with programmable gain, EUSART, I2C/SPI, two CCP/PWM modules, and 18 I/O pins. PPS allows digital peripheral signals to be remapped onto any of the I/O pins, simplifying board layout and reducing pin conflicts when peripherals are added or removed. The internal 32 MHz oscillator provides 8 MIPS throughput without external components. The Intelligent Analog architecture integrates high-performance analog blocks alongside the digital core, enabling sensor conditioning, signal generation, and closed-loop control without external components. Zero-Cross Detect and the Complementary Output Generator support power-factor-corrected motor and lighting control, while CLCs implement glue logic in hardware without code overhead, offloading the CPU for deterministic real-time response. Typical applications include LED lighting with dimming and color mixing, low-power IoT sensor nodes, small appliance control, battery chargers, DC-DC converter control loops, and general-purpose analog signal conditioning. The wide 1.8 V to 5.5 V operating range and XLP low-power modes suit coin-cell and energy-harvesting designs. Design considerations: enable the watchdog timer and brown-out reset in safety-critical firmware; route PPS-mapped outputs carefully to avoid bus contention. Use the ADC with the internal FVR for absolute voltage references above VDD. Compared with discrete analog designs, on-chip op amps trade absolute precision for BOM reduction and PCB simplicity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not typically consolidated in the manufacturer datasheet.

Cotización Contacto

PIC16F1709-I/P

PIC16F1709-I/P - 32MHz 8-Bit MCU with ADC | Microchip

The Microchip Technology PIC16F1709-I/P is an 8-bit PIC16 RISC flash microcontroller with a 32 MHz maximum clock, 14 KB of program Flash memory, 1 KB of data RAM, and a 20-pin PDIP package. It integrates a 10-bit ADC, two operational amplifiers, two comparators, two 2-bit PWM modules, five timers, Core Independent Peripherals, and Peripheral Pin Select for compact general-purpose control. A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals on one integrated circuit. The PIC16F1709 belongs to the PIC16 family of 8-bit RISC microcontrollers and extends into the broader embedded-control hierarchy of processor, microcontroller, and embedded system. Its XLP design targets low-cost, low-power applications where analog sensing, control output, and event handling are needed without a separate analog subsystem. Key features include 14 KB of Flash memory organized as 8K × 14 words, 1,024 bytes of RAM, and a 200 ns instruction execution cycle. Two integrated operational amplifiers support signal conditioning and closed-loop control, while the 10-bit ADC provides digital conversion for analog sensors. The CLC, COG, and Zero Cross Detect peripherals extend the PIC16 Core Independent Peripheral concept, allowing logic functions to continue independently of the main CPU. The MCU provides two 2-bit PWM modules, five timers, two comparators, a watchdog timer, and Peripheral Pin Select. Peripheral Pin Select allows eligible digital functions to be assigned to different I/O pins, supporting design flexibility across sensor inputs, control outputs, and communication functions. The 20-pin PDIP package also exposes analog and digital resources in a through-hole format that is useful for prototypes, educational systems, and manually assembled industrial controllers. Typical applications include temperature or pressure monitoring, compact motor and valve controllers, LED dimming, power conversion, battery-powered instrumentation, and general-purpose control boards. The integrated analog resources can reduce the component count when a design needs signal amplification, threshold detection, or mixed-signal control close to the MCU. Designers should verify the exact peripheral routing, analog-channel assignment, and pin multiplexing in the manufacturer pin-description table before finalizing a PCB. The -I grade suffix identifies the industrial temperature-grade ordering code, but the numerical operating-temperature limits and specific regulatory qualifications must be confirmed from the manufacturer datasheet. This product overview combines memory capacity, clock speed, analog integration, package details, application guidance, drop-in alternatives, and design considerations to accelerate MCU selection. It also emphasizes practical verification points for firmware, clock configuration, analog calibration, and pin assignment rather than presenting the component as an isolated specification list.

Cotización Contacto

PIC16F1709-I/SO

PIC16F1709-I/SO - 8-bit 32MHz 14KB Flash MCU | Microchip

The Microchip PIC16F1709-I/SO is an 8-bit PIC16 enhanced mid-range flash microcontroller (MCU) running at up to 32 MHz, with 14 KB of Flash program memory and 1024 bytes of SRAM, housed in a 20-pin SOIC package. The device integrates intelligent analog peripherals including operational amplifiers, a 10-bit ADC, 8-bit DACs, and comparators alongside core-independent peripherals such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), Zero Cross Detect, and Peripheral Pin Select. The -I temperature grade covers -40C to +85C operation, and the XLP (eXtreme Low Power) sleep current is in the sub-microamp range, making the part suited for battery-powered sensor and IoT applications. An 8-bit flash microcontroller is a single-chip computer built around an 8-bit data path and on-chip non-volatile program memory. Within the broader taxonomy, PIC16F1709 sits inside Microchip's mid-range PIC16 family, which itself belongs to the 8-bit MCU category, then microcontrollers, then integrated circuits. The mid-range core delivers 200 ns instruction execution at 32 MHz, with a 14-bit instruction word and a hardware stack - the architectural sweet spot for cost-sensitive embedded control that still needs analog integration and deterministic interrupt response. Key features include 1024 bytes of SRAM, 256 bytes of EEPROM, up to 18 I/O pins, a 10-bit ADC with up to 12 channels, two 8-bit DACs, two comparators, and up to two on-chip operational amplifiers. The PIC16F1709 also offers a UART, two SPI/I2C, eight PWM channels, and a 32 MHz internal oscillator that eliminates the need for an external crystal in many designs. Typical applications include LED lighting controllers, sensor conditioning front-ends, battery chargers, small appliance controls, consumer white goods, IoT endpoints, and low-cost general-purpose analog signal conditioning. The on-chip op-amps and DACs make the PIC16F1709 well-suited to analog-front-end designs where a discrete op-amp and an MCU would otherwise consume board space and budget. When designing with this MCU, engineers should note that the on-chip peripherals are mapped via PPS, which simplifies PCB layout but requires the latest MPLAB X configuration. The PIC16F1709 runs from 1.8 V to 5.5 V; for a true low-voltage variant, Microchip offers the PIC16LF1709 with the same die and pinout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC16F1709-I/SS

PIC16F1709-I/SS - 8-bit 32MHz MCU 14KB Flash 20-SSOP | Microchip

The Microchip Technology PIC16F1709-I/SS is an 8-bit PIC microcontroller built on the enhanced mid-range PIC16 x14 architecture with 32MHz internal oscillator capability, 14KB (8K x 14) of Flash program memory, 1024 bytes of RAM, and 256 bytes of EEPROM, housed in a 20-pin SSOP package. It delivers 200ns instruction execution, up to 49 GPIO-capable I/O lines, and integrates intelligent analog peripherals including operational amplifiers, 10-bit ADC with computation, 8-bit DAC, and comparators. An 8-bit microcontroller (MCU) is a single-chip computer based on a byte-wide data path. The PIC16F1709 belongs to the PIC16 family from Microchip, sits within the enhanced mid-range XLP (eXtreme Low Power) line, and forms part of the broader PIC microcontroller hierarchy (PIC10/12/14/16/18/24/32). It is classified as a Flash-based CMOS RISC microcontroller IC designed for general-purpose embedded control. Key features include XLP technology for sub-microamp sleep currents, on-chip op amps, Core Independent Peripherals (CLC, COG/NCO, Zero Cross Detect), Peripheral Pin Select (PPS) for flexible signal routing, and an integrated 32MHz internal oscillator that eliminates the need for an external crystal in many applications. The device operates from 1.8V to 5.5V. The PIC16F1709 uses a Harvard RISC architecture with a 14-bit instruction word. Hardware multipliers are not present, but the enhanced instruction set supports C-friendly development with the XC8 compiler. PPS allows digital peripheral pins to be remapped, simplifying PCB layout and reducing GPIO conflicts. Typical applications include LED lighting control, sensor signal conditioning using the on-chip op amps, battery-powered IoT sensor nodes leveraging XLP sleep modes, consumer appliance control, and low-cost motor control (PWM via COG/NCO). The on-chip 10-bit ADC with computation enables touch-style and averaging applications without CPU overhead. When designing with this part, evaluate current consumption at the chosen sleep mode: XLP sleep draws ~50 nA typical. Provide a stable VDDCORE decoupling network of 0.1uF and 1uF in parallel, and reserve the MCLR pin configuration if in-circuit serial programming is required. This page synthesizes distributor pricing, drop-in PIC16F1709 family alternatives in the same SSOP-20 footprint, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC16F1709T-I/SO

PIC16F1709T-I/SO - 8-bit MCU, 14KB Flash, 32MHz, 20-SOIC | Microchip

The Microchip Technology PIC16F1709T-I/SO is an 8-bit PIC16 enhanced mid-range microcontroller delivering 14KB of Flash, 1024 bytes of SRAM, and 32MHz CPU performance in a 20-pin SOIC (0.295 inch / 7.50 mm width) package. The "T" suffix indicates Tape and Reel packaging, the "I" indicates the industrial -40C to +85C operating temperature range, and "/SO" identifies the SOIC-20 footprint. According to the Microchip PIC16F1709 product page, the device integrates Intelligent Analog peripherals including on-chip Op Amps, an 8-bit DAC, a 10-bit ADC with hardware Capacitive Voltage Divider (CVD), and Core Independent Peripherals such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), and Zero-Cross Detect (ZCD), all wrapped in the XLP (eXtreme Low Power) platform. An 8-bit PIC microcontroller is a single-chip computer based on Microchip's RISC (Reduced Instruction Set Computer) architecture, typically executing one instruction per clock cycle (200 ns at 20 MHz, 125 ns at 32 MHz) from a unified Flash program store. PIC microcontrollers occupy a distinct layer in the embedded hierarchy: microcontroller -> 8-bit MCU -> mid-range MCU -> PIC16 family, balancing deterministic real-time behavior, low active and sleep currents, and rich peripheral integration. The PIC16F1709T-I/SO supports Peripheral Pin Select (PPS) for flexible signal routing, EUSART, MSSP (SPI/I2C), and up to 18 I/O pins, making it a strong fit for cost-sensitive mixed-signal embedded designs. Key differentiating features of this part include the XLP sleep current in the order of tens of nanoamps, four 10-bit PWM outputs with COG complementary dead-band control, two on-chip operational amplifiers for analog front-end conditioning, and a fast 10-bit ADC with up to 30 analog channels (package dependent). The 8-bit DAC with selectable reference, combined with the op-amp outputs, enables closed-loop analog control without external components. Together, these peripherals create a "single-chip mixed-signal MCU" value proposition unavailable in plain PIC16F1xxx predecessors. Typical applications include LED lighting controllers using COG + PWM, capacitive touch and proximity sensing via the CVD ADC technique, low-power battery-powered sensors, BLDC and stepper motor commutation, and switched-mode power supply control loops. The PPS feature allows PCB layout changes without silicon respin, which is particularly valuable for mixed-signal designs where analog and digital pin assignments shift late in the design cycle. When designing with this MCU, ensure the configuration words match the intended oscillator (internal HFINTOSC up to 32 MHz, external crystal, or PLL), and validate low-power sleep current in the application rather than relying on the headline nanoamp specification alone, because real-world consumption depends on enabled peripherals and wake-up sources.

Cotización Contacto

PIC16F1709T-I/SS

PIC16F1709T-I/SS - 8-bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1709T-I/SS is an 8-bit PIC16F microcontroller featuring 14KB Flash, 1KB RAM, and a 32MHz internal oscillator, housed in a 20-pin SSOP package with tape-and-reel packaging. The 'T' suffix in the part number designates the tape-and-reel packaging option, while the 'I' indicates the industrial operating temperature range of -40C to +85C. The device belongs to Microchip's XLP (eXtreme Low Power) product family and integrates intelligent analog peripherals including operational amplifiers, a 10-bit ADC, an 8-bit DAC, high-speed comparators, zero-cross detect, and configurable logic cells (CLC). An 8-bit microcontroller (MCU) is a small computer-on-chip that integrates a CPU, memory, and peripherals around an 8-bit data bus. The PIC16F1709 sits in Microchip's mid-range MCU hierarchy (8-bit PIC -> PIC16 family -> enhanced mid-range x14 architecture) and combines RISC processing with on-chip intelligent analog to suit a wide variety of general-purpose applications. Its 200ns instruction execution enables responsive control loops while keeping power consumption low, making it suitable for battery-powered and energy-harvesting designs. Key features include Core Independent Peripherals (CLC, COG, Zero Cross Detect), Peripheral Pin Select (PPS) for flexible signal routing, EUSART, I2C, SPI communication interfaces, and on-chip op amps that eliminate external analog components. The integrated 10-bit ADC and 8-bit DAC support sensor conditioning and signal generation without external converters. The device operates from 2.3V to 5.5V across the industrial temperature range, with XLP technology delivering sleep currents in the microamp range. Typical applications include LED lighting control with COG-driven power-factor correction, consumer appliance user interfaces, IoT sensor nodes, battery-powered instrumentation, and low-cost motor control. The combination of intelligent analog and CIPs allows designers to offload timing-critical tasks from the CPU, reducing firmware complexity and improving system reliability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

Cotización Contacto

PIC16F1713-E/MV

PIC16F1713-E/MV - 8-Bit XLP MCU 7KB Flash 28-UQFN | Microchip

The Microchip Technology PIC16F1713-E/MV is an 8-bit PIC microcontroller featuring 7KB Flash program memory, 512B RAM, and 32MHz operation in a 28-pin UQFN (4x4 mm) package with extended (-40C to +125C) operating range. The device integrates high-speed comparators, 10-bit ADC, on-chip operational amplifiers, 5/8-bit DAC, CCP/PWM, CLC, COG, NCO, ZCD, and Peripheral Pin Select for maximum design flexibility. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and integrated peripherals. The PIC16F1713 belongs to Microchip's PIC16 enhanced mid-range family, optimized for general-purpose and intelligent analog applications. The 'XLP' (eXtreme Low Power) designation indicates power-saving modes that extend battery life, making this MCU well suited to portable and energy-harvesting designs. As an 8-bit RISC MCU, the PIC16F1713 executes single-cycle instructions, balancing code density with deterministic timing. Key features include 14-bit instruction word, 32MHz internal oscillator, two operational amplifiers, four 10-bit ADC channels with computation, and core-independent peripherals that offload tasks from the CPU. The Zero Cross Detect (ZCD) and Numerically Controlled Oscillator (NCO) modules support advanced signal conditioning in motor control and lighting applications without software intervention. The architecture combines intelligent analog integration with low-power operation. On-chip op-amps can drive ADC inputs, implement active filters, or buffer sensor signals. The Configurable Logic Cell (CLC) and Complementary Output Generator (COG) enable custom hardware logic functions, reducing BOM cost by replacing discrete components. Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to any I/O pin, simplifying PCB layout. Typical applications include LED lighting control, sensor signal conditioning, battery-powered IoT nodes, motor control, and consumer appliances. The AEC-Q100 qualified grade supports automotive applications such as body electronics and interior lighting. The compact 4x4 mm UQFN package suits space-constrained designs. Design consideration: When using the internal 32MHz oscillator at full speed, ensure core-independent peripherals are configured to minimize wake events. For battery-powered designs, leverage the nanoWatt XLP sleep modes to reduce current consumption below 1 uA. This page synthesizes distributor pricing, drop-in package equivalents, and practical design considerations not collected in any single manufacturer document.

Cotización Contacto

PIC16F1713-E/SO

PIC16F1713-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16F1713-E/SO is an 8-bit RISC microcontroller in the PIC16F family, featuring a 32MHz core, 7KB Flash program memory, 512 bytes RAM, and 28-pin SOIC wide-body packaging. It integrates on-chip op-amps, a 10-bit ADC with computation, Core Independent Peripherals (CLC, NCO, COG, Zero Cross Detect), and Peripheral Pin Select for flexible signal routing. The -E suffix denotes the extended industrial temperature grade (-40C to +125C). A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and a set of integrated peripherals such as ADCs, timers, communication interfaces, and I/O. Microcontrollers sit at the top of the embedded control hierarchy: sensor input -> MCU -> actuator output, and are classified by bit-width (8-bit, 16-bit, 32-bit), architecture (von Neumann, Harvard), and instruction set (RISC, CISC). The PIC16F family belongs to the 8-bit RISC segment, optimized for cost-sensitive, low-power, deterministic control applications where predictable interrupt latency and small code footprint matter more than raw throughput. Key features of the PIC16F1713 include eXtreme Low Power (XLP) technology with sub-uA sleep currents, a high-speed comparator with 10-bit reference DAC, two operational amplifiers, up to 17 channels of 10-bit ADC, four 16-bit timers, two USART, one I2C, and one SPI peripheral. The 32MHz internal oscillator delivers 8 MIPS performance, while the 49 instruction set ensures tight C-code efficiency. The device operates from 2.3V to 5.5V with multiple power-managed modes. The architecture uses a 14-bit instruction word with a two-stage pipeline, modified Harvard memory organization separating program and data buses, and a priority-based interrupt controller. The integrated op-amps and 10-bit ADC reduce BOM cost in sensor-interface designs by eliminating external analog front-end stages. The CLC (Configurable Logic Cell) allows Boolean combinations of peripheral events without CPU intervention, enabling ultra-low-latency hardware responses. Typical applications include IoT sensor nodes, industrial sensor signal conditioning, battery-powered remote controls, HVAC thermostat controls, LED lighting drivers, and consumer appliance user interfaces. The combination of op-amps, ADC, and Core Independent Peripherals suits mixed-signal designs where analog and digital processing coexist on a single die. When designing with the PIC16F1713-E/SO, reserve sufficient decoupling (100nF plus 10uF bulk) within 5mm of the VDD pins, and follow Microchip AN588 for PCB layout of SOIC wide-body packages. For EMI-sensitive applications, route the 32MHz clock trace short and guard the analog AVSS/AVDD pair. This page synthesizes distributor pricing, verified drop-in same-package alternatives from Microchip's 28-pin PIC16F family, and practical design notes not consolidated in the manufacturer datasheet alone.

Cotización Contacto

PIC16F1713-E/SS

PIC16F1713-E/SS - 8-bit MCU, 7KB Flash, 28-SSOP | Microchip

The Microchip PIC16F1713-E/SS is an 8-bit PIC microcontroller with 7KB Flash program memory, 512 bytes RAM, and 32 MHz CPU speed, housed in a 28-pin SSOP (5.30 mm width) package. It integrates on-chip op-amps, a 10-bit ADC, 5/8-bit DAC, Core Independent Peripherals (CLC, COG, NCO, ZCD), and Peripheral Pin Select (PPS) for maximum design flexibility. The 'E' suffix denotes the -40C to +125C extended operating temperature range, and the '/SS' suffix denotes the 28-pin SSOP package. An 8-bit microcontroller is a microprocessor whose data bus, registers, and ALU operate on 8 bits at a time. Within the broader taxonomy, the PIC16F1713 belongs to Microchip's PIC16 mid-range MCU family, which sits between the smaller PIC10/12 baseline family and the higher-performance PIC18 family. Microcontrollers of this class integrate CPU, Flash program memory, RAM, ADC/DAC, timers, and communication peripherals on a single die, replacing many discrete components in embedded designs. Key features include 4 KB (7 KB total, with 4K x 14 word addressing) of Flash memory, hardware op-amps for signal conditioning, 10-bit ADC with computation, high-speed comparators, PWM/CCP, and multiple communication interfaces including EUSART, I2C, and SPI. The XLP (eXtreme Low Power) technology delivers nanoWatt sleep currents for battery-powered applications. The 28-SSOP package measures 0.209 inches (5.30 mm) in body width. The PIC16F1713 uses a Harvard architecture RISC core with a 14-bit instruction word, enabling compact code density. Its on-chip op-amps allow analog front-end design without external amplifiers, while the CLC, COG, NCO, and ZCD peripherals implement state machines and waveform generation without CPU intervention, reducing firmware complexity and improving determinism. Typical applications include sensor signal conditioning with on-chip op-amps, LED driving with hardware PWM, motor control using the Complementary Output Generator (COG), low-power IoT battery nodes, and industrial control with Core Independent Peripherals. The PPS feature allows peripheral I/O mapping to nearly any pin, simplifying PCB routing. When selecting this part, note the extended temperature grade ('-E') suits industrial and automotive under-hood environments. For -40C to +85C commercial-industrial grade, consider the '-I' variant; for the smaller 28-QFN package, look at PIC16F1713-E/ML or PIC16F1713-E/MV. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC16F1713-I/SO

PIC16F1713-I/SO - 8-Bit 32MHz MCU 7KB Flash 28-SOIC | Microchip

The Microchip Technology PIC16F1713-I/SO is an 8-bit enhanced mid-range PIC16 microcontroller built on the nanoWatt XLP extreme-low-power technology platform, delivering 32 MHz CPU performance with 7 KB (4K x 14 words) of Flash program memory in a 28-pin SOIC package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of digital and analog peripherals. PIC16F1xxx family parts sit in the enhanced mid-range tier of Microchip's 8-bit portfolio, sitting hierarchically between baseline PIC10/12/16 and advanced PIC18/dsPIC, making them suitable for cost-sensitive, low-power embedded designs. The "F" denotes Flash program memory allowing in-circuit re-programmability, while the "XLP" branding indicates nanoWatt technology optimized for battery-powered applications. Key differentiating features of the PIC16F1713 include integrated op-amps, a 10-bit ADC with computation, two 8-bit and one 10-bit DAC, two comparators, Core Independent Peripherals (CLC, COG, NCO, Zero-Cross Detect), and Peripheral Pin Select (PPS) for flexible signal routing. The device offers 512 bytes RAM, 128 bytes EEPROM, and runs from 2.3V to 5.5V with typical active current under 1 mA at 32 MHz and sleep currents in the nanoamp range. Industrial temperature grade covers -40C to +85C. Architecturally, the PIC16F1713 uses a Harvard RISC core with a 200 ns instruction cycle, separate program and data buses, and a deep 14-bit instruction word. PPS remaps digital peripherals to virtually any I/O pin, simplifying PCB layout. The op-amps can be paired with the 10-bit ADC to form closed-loop signal conditioning without external analog ICs, while CLC blocks allow logic functions to be implemented in hardware, offloading the CPU. Typical applications include IoT sensor nodes, battery-powered handheld instruments, LED lighting control, small appliance motor control, and industrial sensor interfaces. The XLP current profile makes the part well-suited for energy-harvesting and remote-control products where standby time dominates the operating budget. When designing with the PIC16F1713, place a 0.1 uF decoupling capacitor within 5 mm of VDD and reserve the ICSP/ICD pins (RB6/RB7 on most pinouts) for debug headers during prototyping. Verify the PPS assignments in code rather than assuming default mappings, as PPS is the most common source of "no signal" debug confusion. This page synthesizes distributor pricing snapshots, drop-in PIC16F17xx family alternatives, and practical analog-mixing design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC16F1713-I/SP

PIC16F1713-I/SP - 8-Bit 32MHz MCU 7KB Flash 28-SPDIP | Microchip

The Microchip Technology PIC16F1713-I/SP is an 8-bit enhanced mid-range CMOS flash microcontroller built on the PIC® RISC architecture, delivering 32MHz operation with 200ns instruction execution in a 28-pin SPDIP (SP) through-hole package. The device integrates 7KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and on-chip op amps, making it a self-contained analog-plus-logic solution for cost-sensitive embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, and peripherals onto one die. Within the broader taxonomy, the PIC16F1713 belongs to the 8-bit MCU -> microcontroller -> embedded processor -> semiconductor hierarchy. The "enhanced mid-range" PIC16 family uses a 14-bit instruction word that balances code density with peripheral richness, fitting between the baseline PIC10/12/16 and the 16-bit PIC24/dsPIC lines. Key features include 17-channel 10-bit ADC, two on-chip operational amplifiers with 3MHz gain-bandwidth, two high-speed comparators, a 16-bit Numerically Controlled Oscillator (NCO), Core Independent Peripherals (CLC, COG, Zero-Cross Detect), and Peripheral Pin Select for flexible signal routing. The XLP (eXtreme Low Power) technology delivers nanoWatt sleep currents below 50nA typical, with active current around 1.6mA at 32MHz. The PIC16F1713 employs a Harvard architecture with separate program and data buses, a hardware stack, and 49 instruction set variants. Hardware multiplier support is absent, but bit-oriented operations, indexed addressing, and single-cycle branching simplify firmware. The device operates from 1.8V to 5.5V across the industrial -40C to +85C temperature range. Typical applications include consumer appliance control, low-cost sensor conditioning with on-chip op amps, LED lighting with COG peripheral, battery-powered IoT edge nodes benefiting from XLP sleep, HVAC thermostat signal chains, and general-purpose replacement of discrete analog + MCU boards. The combination of analog and digital on one die reduces BOM cost and PCB area in space-constrained products. When designing with this device, ensure MPLAB X IDE and XC8 compiler compatibility, and budget Flash endurance at 10,000 erase/write cycles minimum for field-upgradable firmware. The 28-SPDIP package suits through-hole prototyping, hand-rework, and educational labs; for high-volume surface-mount, use the SOIC-28 variant PIC16F1713-I/SO. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers evaluating PIC16F1713-I/SP versus PIC16F1716, PIC16F1709, or PIC16F1615 families will find the comparison_table and design_notes sections useful for fast BOM decisions.

Cotización Contacto

PIC16F1713T-I/ML

PIC16F1713T-I/ML - 8-Bit 32MHz 7KB Flash MCU | Microchip

The Microchip PIC16F1713T-I/ML is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family that integrates 7KB (4K x 14) of Flash program memory, 32 MHz maximum CPU speed, and a rich set of on-chip intelligent analog peripherals in a 28-pin 6x6 mm QFN package with exposed thermal pad. It is engineered to combine extreme low power (XLP) operation with high analog integration, targeting general-purpose applications that demand flexible mixed-signal performance in a compact footprint. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (typically Flash), data memory (SRAM), non-volatile EEPROM, and a suite of on-chip peripherals such as timers, ADC, communication interfaces, and I/O. PIC microcontrollers from Microchip use a RISC-based 8-bit core with a 14-bit instruction word, classified within the 8-bit MCU segment of the broader microcontroller > embedded controller > semiconductor taxonomy. The PIC16F1713 belongs to the mid-range PIC16 enhanced family, bridging the gap between baseline PIC10/12/16 and the higher-performance PIC18/dsPIC families. Key features include on-chip operational amplifiers (Op Amps), Core Independent Peripherals (CLC, COG, NCO and Zero Cross Detect), Peripheral Pin Select (PPS), a 10-bit ADC with computation, 8-bit DAC, comparators, and PWM/Signal Measurement Timers. The XLP technology delivers nanoWatt deep-sleep currents suitable for battery-powered sensor nodes and IoT edge devices. Memory-mapped peripherals and PPS enable flexible routing of digital functions to physical pins without rewiring the PCB. Architecturally, the PIC16F1713 uses Microchip's enhanced mid-range core with a 14-bit instruction set, hardware multiplier, and 16-level stack. The 'T' suffix denotes tape-and-reel packaging for high-volume assembly, while the 'I' grade specifies the industrial temperature range (-40 °C to +85 °C). The 28-QFN package exposes the die ground pad to improve thermal dissipation and electrical grounding for noise-sensitive analog designs. Typical applications include sensor signal conditioning with on-chip op-amps, LED lighting control using COG and PWM, low-power IoT battery nodes, motor control signal generation, and general-purpose mixed-signal embedded systems. Designers favor this part when the on-chip analog integration eliminates external components and reduces BOM cost. When designing, place decoupling capacitors within 2 mm of each VDD pin and provide a low-impedance ground pour under the exposed pad. PPS reassignment must respect the peripheral-to-pin mapping table in the datasheet; consult Microchip MPLAB X IDE Configurator Code for the supported mappings. This page synthesizes distributor pricing, drop-in alternatives across the PIC16F171x family, and practical design notes compiled from the manufacturer datasheet and verified distributor data not aggregated on any single vendor page.

Cotización Contacto

PIC16F1713T-I/MV

PIC16F1713T-I/MV - 8-bit MCU, 32MHz, 7KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC16F1713T-I/MV is an 8-bit PIC microcontroller from the PIC16F171X family, operating at up to 32 MHz and integrating 7 KB Flash, 512 B RAM, and 256 B EEPROM in a 28-pin UQFN (4x4 mm) package with exposed pad. It features on-chip operational amplifiers, a 10-bit ADC, a 5/8-bit DAC, a high-speed comparator, Core Independent Peripherals (CLC, NCO, Zero-Cross Detect, COG), PWM, CCP, and communication peripherals including EUSART, I2C and SPI, supported by Peripheral Pin Select for flexible pin mapping. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, working RAM, and programmable peripherals into a single device, forming the lowest tier of the embedded computing hierarchy alongside microprocessors, SoCs and DSPs. The PIC16F1713 belongs to the broader 8-bit microcontrollers category (MCU -> 8-bit MCU -> PIC16 -> PIC16F171X), which typically trades raw performance for low power consumption, deterministic behaviour, and small code footprint - characteristics that make 8-bit parts popular in cost-sensitive, battery-powered, and real-time-control designs. Key specifications of the PIC16F1713T-I/MV include 25 general-purpose I/O lines, an extended supply-voltage range from 2.3 V to 5.5 V, XLP (eXtreme Low Power) technology, a 10-bit ADC with up to 17 channels, and a 32 MHz internal oscillator. The 'T' suffix designates Tape & Reel packaging for high-volume automated assembly, while 'I' indicates the industrial operating temperature range of -40C to +85C, and 'MV' denotes the UQFN-28 package. Architecturally, the device uses a 14-bit instruction word PIC16 core with a modified Harvard architecture and an 8-bit data path, complemented by a hardware multiplier and direct memory access support. The combination of on-chip analog (op-amps, DAC, ADC) with digital Core Independent Peripherals allows designers to implement sensor conditioning, signal generation, and control loops without external components. Typical applications include LED lighting control, sensor signal conditioning, low-power IoT endpoints, consumer appliance control, battery chargers, fan and pump control, and small motor drivers. The combination of integrated op-amps, DAC and high-speed comparator enables closed-loop analog control tasks that traditionally required dedicated analog ICs. When designing with this part, engineers should evaluate the op-amp output drive capability versus the application load, leave headroom on the ADC input range to avoid saturation, and use Peripheral Pin Select (PPS) to remap EUSART and SPI functions and simplify PCB routing. The exposed thermal pad of the UQFN-28 package must be soldered to the PCB ground plane to meet the datasheet's thermal and electrical specifications. This page synthesises distributor pricing, pin-compatible drop-in alternatives sourced from verified web data, and practical design notes that complement (rather than duplicate) the manufacturer datasheet.

Cotización Contacto

PIC16F1713T-I/SS

PIC16F1713T-I/SS - 8-bit MCU, 7KB Flash, 32MHz, 28-SSOP | Microchip

The Microchip Technology PIC16F1713T-I/SS is an 8-bit PIC microcontroller featuring 7KB (4K x 14) of Flash program memory, 512 bytes of RAM, and a maximum CPU clock of 32MHz, housed in a 28-pin SSOP (Shrink Small Outline Package). It belongs to the PIC16F171x family that combines "Intelligent Analog" integration with eXtreme Low Power (XLP) technology for general-purpose embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals around an 8-bit data bus. Within the broader semiconductor taxonomy, MCUs sit inside the Integrated Circuits > Microcontrollers category, which itself belongs to the embedded computing hierarchy of processors, controllers, and finally semiconductors. The PIC16F1713 family specifically targets cost-sensitive analog-heavy applications where on-chip op-amps, DACs, and comparators eliminate external analog ICs. Key features include integrated op-amps, a 10-bit ADC with up to 17 channels, 5-bit and 8-bit DACs, two high-speed comparators, Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect), Peripheral Pin Select (PPS), and dual CCP/PWM modules. Communication interfaces include EUSART, I2C, and SPI. The XLP sleep current is typically below 50 nA, enabling years of battery life in always-on sensor nodes. Architecturally, the PIC16F1713 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and a hardware multiplier. The CLC (Configurable Logic Cell) and NCO (Numerically Controlled Oscillator) peripherals operate without CPU intervention, allowing deterministic timing for motor control, lighting, and power-conversion feedback loops without software overhead. Typical applications include LED lighting drivers, battery chargers, sensor signal conditioning, small motor control (fans, pumps), home appliances, and IoT edge nodes. The integrated op-amp + DAC + ADC + ZCD chain enables single-chip closed-loop constant-current LED drivers and zero-cross SSRs without any external analog components. When designing with this part, allocate the PPS mapping carefully: many analog peripherals share pins, and remapping mid-design requires re-validating the PCB layout. The 28-SSOP footprint also limits I/O count to roughly 25 usable pins, so dense HMI designs should consider the 40-pin PIC16F1716 variant. This page synthesizes distributor pricing, drop-in SSOP-28 alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a faster decision path.

Cotización Contacto

PIC16F1716-E/ML

PIC16F1716-E/ML - 8-Bit MCU, 14KB Flash, 32MHz, 28-QFN | Microchip

The Microchip Technology PIC16F1716-E/ML is an 8-bit PIC® XLP™ microcontroller with 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a maximum CPU clock of 32MHz, housed in a 28-pin QFN (6x6 mm) package. The device integrates Intelligent Analog peripherals including on-chip operational amplifiers, a 10-bit ADC, 5-bit and 8-bit DACs, high-speed comparators, and Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect), providing extensive analog and digital signal-chain flexibility for cost-sensitive embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces (ADC, timers, communication buses) into one package. Within the broader taxonomy it belongs to the class of embedded controllers, a subset of microprocessors, which are themselves a subset of digital semiconductors. The PIC16F family sits in the 8-bit mid-range category, optimized for low-power and cost-effective general-purpose applications, sitting above PIC10/12 baseline parts and below the PIC18 and PIC32 16/32-bit families. Key features include eXtreme Low Power (XLP) technology for battery-friendly operation, Peripheral Pin Select (PPS) for flexible signal routing, multiple communication interfaces (I²C, SPI, UART), and enhanced PWM/CCP modules for motor and lighting control. The integrated op amps and DACs enable closed-loop analog control without external components, while CLC/NCO/COG peripherals implement complex logic, frequency synthesis, and waveform generation in hardware without CPU intervention. The PIC16F1716 architecture is built on an enhanced mid-range 8-bit core with a 14-bit instruction word, a hardware stack, and Harvard bus structure. It supports in-circuit serial programming (ICSP) and in-circuit debugging via ICD, allowing firmware updates after PCB assembly. Internal voltage reference and zero-cross detect support direct mains-coupled signal conditioning. Typical applications include LED lighting control, battery-powered sensor nodes, consumer appliances, industrial control loops, and small motor drives. The combination of on-chip op amps, DAC, and PWM simplifies mixed-signal designs. When designing with this MCU, ensure decoupling capacitors (100 nF and 10 µF) are placed close to VDD/AVDD pins, and configure unused I/O as outputs low to minimize current draw. PPS must be remapped before peripheral enable to avoid unintended signal conflicts. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with values verified against Microchip's official 28-pin PIC® (L)F170x/171x datasheet family.

Cotización Contacto

PIC16F1716-E/MV

PIC16F1716-E/MV - 14KB Flash 8-bit MCU w/ Op Amps | Microchip

The Microchip Technology PIC16F1716-E/MV is an 8-bit PIC microcontroller from the PIC16F171X family, integrating 14KB of Flash program memory, 1KB of RAM, and a rich set of Core Independent Peripherals (CIPs) including Configurable Logic Cells (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero Cross Detect (ZCD). The device operates at speeds up to 32 MHz and is housed in a 28-pin UQFN (MV) package with an exposed pad, supporting surface-mount assembly in compact board layouts. A microcontroller (MCU) is a single-chip computer that integrates a processor core, RAM, non-volatile memory, and peripherals onto one silicon die. The PIC16F1716 belongs to the "8-bit intelligent analog" category, a class of MCUs that combine traditional digital control with on-chip analog peripherals such as operational amplifiers, 10-bit ADCs, 5/8-bit DACs, and high-speed comparators. Within the broader semiconductor taxonomy, an MCU sits below microprocessors (which lack integrated memory) and above discrete logic in integration level, serving as the programmable decision-making element in embedded systems. Key features include on-chip op amps that eliminate external signal-conditioning components, Peripheral Pin Select (PPS) for flexible pin mapping, and Microchip's eXtreme Low Power (XLP) technology that achieves nanoWatt sleep currents suitable for battery-powered applications. The 10-bit ADC and high-speed comparator allow direct interfacing with analog sensors, while the 5/8-bit DAC enables analog waveform generation for control loops. Architecturally, the PIC16F1716 uses a RISC-based Harvard processor core with 49 instructions and a 16-level hardware stack. The 32 MHz operation delivers 8 MIPS of throughput, sufficient for sensor processing and PID control loops. Integrated Core Independent Peripherals can operate without CPU intervention, reducing firmware complexity and freeing the core for higher-level tasks. Typical applications include sensor signal conditioning with on-chip op amps, LED lighting control using the COG peripheral, motor control loops with PWM and comparator feedback, and general-purpose IoT endpoints where low power consumption is critical. The combination of intelligent analog and CIPs makes this MCU particularly suited for cost-sensitive mixed-signal designs. When designing with this device, place decoupling capacitors within 2 mm of each VDD pin and use the exposed pad to minimize thermal resistance. The PPS feature allows pin reassignment but requires care to avoid conflicts between peripherals sharing alternate pins. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F170X/171X family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC16F1716-E/SO

PIC16F1716-E/SO - 8-bit MCU, 14KB Flash, 32MHz, 28-SOIC | Microchip

The Microchip Technology PIC16F1716-E/SO is an 8-bit PIC microcontroller built on the enhanced mid-range core, integrating 14KB Flash program memory with 1KB RAM and 32 MHz operation in a 28-pin SOIC (SO) package. It belongs to the PIC16F170X/171X family of cost-effective Intelligent Analog flash MCUs and ships with extended temperature range silicon (the -E suffix denoting -40°C to +125°C operation). What is a PIC16 8-bit MCU? PIC16F microcontrollers are 8-bit RISC microcontrollers built on Microchip's enhanced mid-range core with a 14-bit instruction word. They sit between baseline PIC10/12/16 devices and the higher-end PIC18 family. The PIC16F1716 belongs to the Intelligent Analog sub-line that integrates op-amps, comparators, 10-bit ADC, 5/8-bit DAC and Core Independent Peripherals (CLC, COG, NCO, ZCD), giving designers analog signal conditioning and PWM/timing blocks without external ICs. Key features include 14KB (8K x 14) Flash, 1KB RAM, 32 MHz internal oscillator, Peripheral Pin Select (PPS) for flexible signal routing, and the XLP eXtreme Low Power suite. Per the manufacturer product page, the device is positioned as "Intelligent Analog integration with low cost and extreme low power (XLP) to suit a variety of general purpose applications." It also includes two on-chip op-amps, two high-speed comparators, a 10-bit ADC, 5-bit and 8-bit DACs, CCP/PWM, COG (Complementary Output Generator), NCO (Numerically Controlled Oscillator), CLC (Configurable Logic Cell), Zero Cross Detect (ZCD), EUSART, I²C and SPI. The architecture pairs a Harvard RISC pipeline with 49 instructions and 16-level hardware stack. PPS enables digital peripheral I/O remapping post-reset — useful when laying out mixed-signal boards. The integrated op-amps and high-speed comparators are key differentiators over the baseline PIC16F170X line, allowing sensor signal chains and zero-cross AC detection with no external analog IC. Typical applications include sensor conditioning front-ends, AC line zero-cross switching, LED lighting control with CLC-driven COG/PWM, low-power IoT nodes (XLP run/sleep modes), general-purpose motor control signal generation, and mixed-signal instrumentation. The -E industrial temperature grade (–40°C to +125°C) supports deployment in outdoor, automotive cabin, and industrial cabinet environments. When designing with this part, plan ICSPDAT/ICSPCLK access on dedicated pins (or PPS-mapped equivalents) and reserve adequate Flash for your bootloader. The 28-SOIC requires hand-solder rework considerations; consider the SPDIP or SSOP variants for breadboard prototyping. This page synthesizes distributor pricing, package-specific drop-in alternatives, and practical design notes that complement (rather than duplicate) the manufacturer datasheet.

Cotización Contacto

PIC16F1716-E/SS

PIC16F1716-E/SS - 8-bit MCU, 14KB Flash, 28-SSOP | Microchip

The Microchip PIC16F1716-E/SS is an 8-bit flash microcontroller from the PIC16F1713/6 family that combines Intelligent Analog integration with extreme low power (XLP) technology in a 28-pin SSOP package. It integrates 14 KB of program flash, 1 KB of RAM, on-chip operational amplifiers, a 10-bit ADC with computation (ADC^2), and Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect) with Peripheral Pin Select for flexible signal routing. The device operates up to 32 MHz instruction clock and supports a wide 1.8V-5.5V supply range. A PIC16F-series microcontroller is an 8-bit Harvard-architecture MCU with on-chip flash program memory and integrated peripherals, sitting in the hierarchy: microcontroller -> embedded microcontroller -> 8-bit MCU -> PIC16 family -> PIC16F171X sub-family. The 'F' suffix denotes flash-based reprogrammable memory; the '1716' identifies the specific device within Microchip's PIC16 enhanced mid-range core family. Key features include two on-chip op-amps configurable as amplifiers, comparators, or ADC drivers, a 10-bit PWM module, Complementary Output Generator (COG) for power-conversion timing, Numerically Controlled Oscillator (NCO) for fine frequency synthesis, Configurable Logic Cells (CLC) for glue-less logic, Zero-Cross Detect (ZCD) for AC-line synchronization, and Peripheral Pin Select (PPS) for pin-function remapping. The 1716 variant offers more memory and I/O than the 1713 sibling in the same package. Architecturally, the PIC16F1716 uses Microchip's enhanced mid-range core (49 instructions, 16-bit opcode) with a hardware multiplier and C compiler-friendly architecture. The 'intelligent analog' peripherals let the device replace several external analog ICs, reducing BOM cost in sensor-interface and motor-control designs while still consuming under 1 uA in sleep mode (XLP). I2C, SPI, and EUSART connectivity with PPS routing enables flexible PCB layouts. Typical applications include low-cost sensor signal conditioning with on-chip op-amps, AC-line zero-cross switching with ZCD, LED lighting control with PWM and COG, battery-powered IoT sensor nodes leveraging XLP sleep current, and small motor-control loops. The 28-SSOP footprint makes it well suited for hand-soldered prototypes and production through-hole or socketed designs. When designing with the PIC16F1716-E/SS, allocate at least 4 decoupling caps (100 nF per VDD pair plus a bulk 10 uF) within 5 mm of the package and respect the device's maximum 32 MHz Fosc for timing-sensitive peripherals. The ZCD and COG peripherals require specific PWM initialization sequences for safe AC mains interfacing. This page synthesizes SSOP-28 pin-level details, distributor pricing, drop-in alternatives from the PIC16F171X family, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC16F1716-I/ML

PIC16F1716-I/ML - 8-Bit 32MHz MCU, 14KB Flash, 28-QFN | Microchip

The Microchip Technology PIC16F1716-I/ML is an 8-bit PIC16F microcontroller featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 32 MHz internal oscillator, packaged in a 28-pin QFN (6x6 mm) with an exposed thermal pad. It is part of the PIC® XLP™ (eXtreme Low Power) family, delivering Intelligent Analog integration with on-chip op amps, 10-bit ADC, 5/8-bit DAC, Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect), and Peripheral Pin Select (PPS), providing exceptional design flexibility for general-purpose applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals onto one silicon die. The PIC16F family uses Microchip's enhanced mid-range RISC core executing one instruction per clock cycle (other than branched instructions), and falls within the broader hierarchy of microcontroller -> embedded controller -> semiconductor device. The 'F' suffix indicates Flash-based reprogrammable program memory, the '16' indicates the mid-range architecture family, and 'XLP' denotes Microchip's ultra-low-power technology platform that targets battery- and energy-harvesting applications. Key features include 14KB Flash, 1KB RAM, 1024 bytes of EEPROM, a 10-bit ADC with computation (ADC2), comparators, two on-chip operational amplifiers, a 5-bit and 8-bit DAC, four 16-bit timers, two CCP modules, and serial interfaces including I2C, SPI, and EUSART. The 32 MHz internal oscillator drives a 62.5 ns instruction cycle, and the device operates across 2.3V to 5.5V. The 28-QFN package supports industrial temperature operation from -40 °C to +85 °C. Architecturally, the PIC16F1716 integrates a 49-instruction enhanced mid-range core with a 14-bit instruction word, hardware multiplier, and interrupt controller. Peripheral Pin Select (PPS) allows digital peripheral pins to be remapped to general-purpose I/O, simplifying PCB routing. Core Independent Peripherals (CIPs) such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), and Numerically Controlled Oscillator (NCO) execute tasks without CPU involvement, reducing firmware complexity and improving determinism. Typical applications include sensor signal conditioning with on-chip op amps, LED lighting control via COG and PWM, low-power IoT edge nodes, consumer appliances, battery chargers, and general-purpose embedded control. The combination of analog integration and XLP technology makes the part well suited for products that require both signal processing and long battery life. When designing with this device, place decoupling capacitors (100 nF and 10 µF) close to the VDD/VSS pins and connect the QFN exposed pad to a solid ground plane for thermal and electrical performance. PPS configuration must be locked at runtime to prevent accidental remapping, and unused op-amp and DAC outputs should be disabled in firmware to minimize quiescent current in XLP applications. This page synthesizes distributor pricing, drop-in same-package alternatives, parametric comparison data, and practical design notes that supplement the Microchip PIC16F1716 datasheet.

Cotización Contacto

PIC16F1716-I/MV

PIC16F1716-I/MV - 8-Bit 32MHz MCU, 14KB Flash, Op Amps | Microchip

The Microchip Technology PIC16F1716-I/MV is an 8-bit PIC® XLP™ 16F microcontroller integrating 14KB Flash program memory, 1KB RAM, and a rich set of intelligent analog peripherals in a compact 28-pin UQFN (4x4 mm) package with an exposed thermal pad. It executes instructions at up to 32 MHz and operates from 2.3V to 5.5V, combining intelligent analog integration with extreme low power (XLP) for cost-sensitive general-purpose designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), working RAM, and a configurable set of digital and analog peripherals around a compact core. The PIC16F1716 belongs to the 8-bit PIC16 family — part of the broader category of microcontrollers -> microprocessors -> semiconductor devices -> integrated circuits. The 8-bit PIC architecture is well known for deterministic instruction timing, ease of use in C or assembly, and very low sleep currents that suit battery-powered and energy-harvesting products. Key features include two on-chip operational amplifiers (Op Amps) that eliminate external analog front-end components, a 10-bit ADC with computation (ADC2), 5-bit and 8-bit DACs, two high-speed comparators, a numerically controlled oscillator (NCO), complementary output generator (COG), zero-cross detect (ZCD), configurable logic cells (CLC), peripheral pin select (PPS), and EUSART/I²C/SPI interfaces. These core-independent peripherals allow complex timing and signal-conditioning tasks to run autonomously without CPU intervention, freeing the core for application logic. Typical applications include LED lighting controllers, sensor conditioning with on-chip op amps, low-power IoT sensor nodes, white-goods user-interface boards, battery chargers, and small motor control loops. The exposed thermal pad aids heat spreading when the device drives outputs near its full rating, and the 4x4 mm UQFN footprint is among the smallest in the PIC16 line, enabling dense PCB layouts. When designing with this MCU, place the VDDCORE decoupling capacitor as close as possible to pin 20 and route analog/digital grounds thoughtfully because the op amps share the analog supply domain. PPS allows most digital peripherals to be remapped to nearly any I/O pin, which simplifies PCB routing and lets one layout support multiple firmware variants.

Cotización Contacto

PIC16F1716-I/SO

PIC16F1716-I/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1716-I/SO is an 8-bit PIC microcontroller featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator, housed in a 28-pin SOIC (0.295" / 7.50mm body width) package. The device integrates Intelligent Analog peripherals including on-chip operational amplifiers and a 10-bit ADC with computation, making it well-suited for mixed-signal embedded designs. According to the Microchip product page, the PIC16F1716 also exposes Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero Cross Detect, all accessible via Peripheral Pin Select (PPS) for flexible I/O mapping. The -I suffix denotes the industrial temperature grade (-40C to +85C), while the /SO suffix identifies the 28-pin SOIC package. What is an 8-bit intelligent analog microcontroller? It is a microcontroller that combines a traditional CPU core with on-chip analog signal-conditioning blocks (op-amps, comparators, ADC, DAC), so the device can both digitize sensors and drive analog outputs without external amplifier ICs. In the broader taxonomy, the PIC16F1716 sits at the junction of microcontroller (MCU), mixed-signal IC, and embedded control SoC, descending from Microchip's PIC® 16F mid-range family and the PIC® XLP™ extreme-low-power lineage. Key features include 4 op-amps integrated on-chip, 8-bit slope-compensated PWM, 10-bit ADC with computation (ADC^2) for hardware-averaging oversampling, and a 5-bit DAC reference. The XLP technology enables a typical sleep current in the nanoampere range, ideal for battery-powered applications such as IoT sensors and remote controls. The 28-SOIC footprint maintains hand-solderable and breadboard-friendly form factor for prototypes and small production runs. Typical applications include consumer appliances, motor control (small DC and stepper drives), LED lighting controllers, sensor signal conditioning, battery chargers, smoke/CO detectors, and low-power IoT nodes. The combination of on-chip analog, Core Independent Peripherals, and PPS allows designers to reduce external component count and BOM cost while shortening firmware development cycles. A key design consideration is PPS routing: not every peripheral can be mapped to every pin, so the firmware configuration must respect the pin assignment matrix published in the datasheet. Always reserve sufficient I/O for debug (ICSP) when laying out a board. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC16F1716-I/SP

PIC16F1716-I/SP - 32MHz 8-bit MCU, 14KB Flash, 28-SPDIP | Microchip

The Microchip Technology PIC16F1716-I/SP is an 8-bit enhanced mid-range PIC16 microcontroller built on the PIC® RISC architecture, delivering 32 MIPS at 32 MHz internal clock with 200 ns instruction execution. It integrates 14 KB of Flash program memory, 1024 bytes of SRAM, and 256 bytes of EEPROM in a 28-pin SPDIP through-hole package. An 8-bit PIC microcontroller is a single-chip computer built around an 8-bit data path and Harvard RISC core, optimized for deterministic real-time control in cost-sensitive embedded systems. The PIC16F1716 sits in the broader hierarchy of 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. It belongs to the eXtreme Low Power (XLP) family designed for battery-powered and energy-harvesting applications where quiescent current directly determines field lifetime. Key specifications include 17 channels of 10-bit ADC, two 8-bit DACs, two operational amplifiers, two comparators, two 10-bit PWM modules, five timers, and an EUSART with auto-baud detection. Core Independent Peripherals (CIPs) such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detect enable complex waveform generation without CPU intervention. The device supports 1.8V to 5.5V operation across the industrial temperature range (-40°C to +85°C for the I-suffix) with a typical active current under 150 µA/MHz and sleep currents down to 20 nA with RTC enabled. The integrated op amps and DACs allow direct sensor signal conditioning on-chip, replacing external analog components and reducing PCB area and BOM cost. Typical applications include sensor signal conditioning nodes, IoT edge devices, low-cost motor and fan control, LED lighting drivers, smoke and gas detectors, and battery-powered instrumentation. The 28-SPDIP package simplifies breadboard prototyping and hand-soldered through-hole assembly for low-volume and hobbyist designs. When designing with this MCU, allocate the 14 KB Flash carefully - the standard XC8 compiler with optimization produces roughly 4-5 KB of code for typical embedded applications, leaving headroom for bootloader or field-upgrade partitions. The Peripheral Pin Select (PPS) feature allows remapping of digital peripherals to almost any I/O pin, simplifying PCB routing in space-constrained designs. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC and Ampheo, parametric equivalents from the PIC16F1716 family, and practical design considerations that the manufacturer datasheet alone does not surface.

Cotización Contacto

PIC16F1716-I/SS

PIC16F1716-I/SS - 8-bit MCU, 14KB Flash, 28-SSOP | Microchip

The Microchip Technology PIC16F1716-I/SS is an enhanced mid-range 8-bit PIC16 microcontroller (MCU) featuring 14KB of Flash program memory (8K x 14 words), 1KB of RAM, and a 32 MHz internal oscillator, housed in a 28-pin SSOP (Shrink Small Outline Package). It is part of the PIC16F170x/171x family that combines Intelligent Analog integration with extreme low power (XLP) technology. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals designed for embedded control. The PIC16F1716 belongs to the 8-bit MCU category, which uses an 8-bit data path. Within the broader semiconductor taxonomy, 8-bit MCUs sit under microcontrollers, then embedded processors, then integrated circuits. The 8-bit class remains dominant in cost-sensitive, low-power applications because of its small code footprint, deterministic interrupt latency, and decades of mature tool support. Key features include two on-chip operational amplifiers, two high-speed comparators, a 10-bit ADC with up to 28 channels, a 5-bit/8-bit DAC, Core Independent Peripherals (CLC, COG, NCO, Zero Cross Detect), and Peripheral Pin Select (PPS) for flexible signal routing. The XLP technology delivers nanoWatt sleep currents below 50 nA typical in deep sleep, enabling battery-powered designs to operate for years on a single cell. The architecture is built on Microchip's enhanced mid-range x14 instruction set, providing 200 ns instruction execution at 32 MHz, 49 instructions, and 14-bit-wide instruction words. This balance of code density and computational throughput suits mixed-signal sensor conditioning, closed-loop control loops, and human-machine interface tasks. Typical applications include industrial sensor conditioning, IoT edge nodes, low-power metering, building automation, motor control signal chains, and consumer white goods. The integrated op amps and comparators allow direct interface with bridge sensors, photodiodes, and thermistors without external analog front-end components. When designing with this device, allocate careful PCB layout around the analog inputs, keep analog and digital ground returns separated, and verify PPS remapping against your chosen peripheral set in MPLAB X IDE. The XLP sleep modes also require explicit clock-source configuration on wake-up to maintain firmware timing. This page synthesizes distributor stock, drop-in alternatives, and engineering design notes not consolidated on the manufacturer datasheet, giving procurement and design engineers a single reference for evaluating the PIC16F1716-I/SS against competitor and same-family options.

Cotización Contacto

Subcategorías

Productos (38.000+)

PIC16F1709-E/SS - 8-Bit 32MHz 14KB Flash MCU | Microchip

PIC16F1709-I/ML - 8-bit MCU, 14KB Flash, 32MHz, 20-QFN | Microchip

PIC16F1709-I/P - 32MHz 8-Bit MCU with ADC | Microchip

PIC16F1709-I/SO - 8-bit 32MHz 14KB Flash MCU | Microchip

PIC16F1709-I/SS - 8-bit 32MHz MCU 14KB Flash 20-SSOP | Microchip

PIC16F1709T-I/SO - 8-bit MCU, 14KB Flash, 32MHz, 20-SOIC | Microchip

PIC16F1709T-I/SS - 8-bit 32MHz 14KB Flash MCU | Microchip

PIC16F1713-E/MV - 8-Bit XLP MCU 7KB Flash 28-UQFN | Microchip

PIC16F1713-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 28-SOIC | Microchip

PIC16F1713-E/SS - 8-bit MCU, 7KB Flash, 28-SSOP | Microchip

PIC16F1713-I/SO - 8-Bit 32MHz MCU 7KB Flash 28-SOIC | Microchip

PIC16F1713-I/SP - 8-Bit 32MHz MCU 7KB Flash 28-SPDIP | Microchip

PIC16F1713T-I/ML - 8-Bit 32MHz 7KB Flash MCU | Microchip

PIC16F1713T-I/MV - 8-bit MCU, 32MHz, 7KB Flash, 28-UQFN | Microchip

PIC16F1713T-I/SS - 8-bit MCU, 7KB Flash, 32MHz, 28-SSOP | Microchip

PIC16F1716-E/ML - 8-Bit MCU, 14KB Flash, 32MHz, 28-QFN | Microchip

PIC16F1716-E/MV - 14KB Flash 8-bit MCU w/ Op Amps | Microchip

PIC16F1716-E/SO - 8-bit MCU, 14KB Flash, 32MHz, 28-SOIC | Microchip

PIC16F1716-E/SS - 8-bit MCU, 14KB Flash, 28-SSOP | Microchip

PIC16F1716-I/ML - 8-Bit 32MHz MCU, 14KB Flash, 28-QFN | Microchip

PIC16F1716-I/MV - 8-Bit 32MHz MCU, 14KB Flash, Op Amps | Microchip

PIC16F1716-I/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip

PIC16F1716-I/SP - 32MHz 8-bit MCU, 14KB Flash, 28-SPDIP | Microchip

PIC16F1716-I/SS - 8-bit MCU, 14KB Flash, 28-SSOP | Microchip