Circuitos integrados

PIC32MX120F032D-I/TL

PIC32MX120F032D-I/TL - 32-bit MCU 32KB Flash 40MHz 44-VTLA | Microchip

The Microchip Technology PIC32MX120F032D-I/TL is a 32-bit MIPS32 M4K microcontroller featuring 32KB of Flash program memory, 8KB of SRAM, and a 40 MHz CPU core, housed in a 44-pin VTLA (6x6 mm) exposed-pad package. The device integrates 21 general-purpose I/O pins, an on-chip USB 2.0 full-speed transceiver, two I2S/SPI modules, a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing. Operating voltage spans 2.3V to 3.6V with industrial temperature range of -40C to +85C, and quiescent current below 0.5 mA/MHz. A 32-bit microcontroller (MCU) is an integrated circuit combining a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals such as timers, communication controllers, and analog blocks. The PIC32MX1XX/2XX family targets cost-sensitive embedded applications that benefit from MIPS32 architectural efficiency, deterministic interrupt response, and code-density advantages relative to ARM Cortex-M0/M0+ devices. The PIC32MX120F032D sits at the low-memory, low-pin-count end of that family and is part of the broader microcontroller taxonomy: 32-bit MCU -> MCU -> embedded controller -> semiconductor IC. Key features include Peripheral Pin Select (PPS) for flexible function remapping, five 16-bit general-purpose timers, a 10-bit ADC, and hardware USB device/host/OTG support with integrated transceiver. PPS in particular eliminates the rigid pin-function mapping that constrains many competing MCUs, allowing board designers to route signals to minimize PCB layer count. Typical applications include low-cost USB peripherals, audio interfaces using I2S, small graphical user interfaces (PMP-driven LCDs), mTouch capacitive buttons/sliders, and industrial sensor hubs. The 44-VTLA package suits compact handheld designs, and the exposed thermal pad aids in dissipating peak switching currents. When designing with the PIC32MX120F032D, allocate adequate decoupling (100 nF plus 10 uF bulk per VDD/USB pair) and follow Microchip's recommended 6x6 VTLA land pattern to avoid solder-joint reliability issues during thermal cycling. This page consolidates distributor pricing, drop-in alternatives, and design notes not assembled in the manufacturer datasheet, giving a faster path from part selection to prototype.

Cotización Contacto

PIC32MX120F032D-V/PT

PIC32MX120F032D-V/PT - 32-bit 40MHz MCU, 32KB Flash, 44-TQFP

The Microchip Technology PIC32MX120F032D-V/PT is a 32-bit RISC microcontroller based on the MIPS32 M4K core, delivering up to 40 MHz of CPU performance with sub-0.5 mA/MHz active current consumption. It integrates 32 KB of Flash program memory and 8 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package with 34 general-purpose I/O lines. Operating voltage is 2.3 V to 3.6 V and the device is AEC-Q100 qualified for automotive designs. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. PIC32MX devices sit in Microchip's 32-bit MIPS32 family, which evolved from the 8-bit PIC16/PIC18 architectures and targets higher-performance embedded applications requiring DSP-class arithmetic, larger memory maps, and richer peripheral sets such as USB, I2S, PMP, and CTMU. Key features of this part include two I2S/SPI modules for codec and serial communication, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive-touch buttons and sliders. Five 16-bit timers support capture, compare, and PWM generation. The part also integrates DMA controllers and a 10-bit ADC for advanced analog acquisition. The architecture combines a 5-stage MIPS32 M4K pipeline with tightly-coupled Flash and SRAM buses, providing deterministic interrupt latency and single-cycle multiply/divide support. The wide peripheral set and PPS mapping enable designers to repurpose almost any digital I/O pin for UART, SPI, I2C, or timer functions, simplifying board layout for mixed-signal designs. Typical applications include automotive body and HMI controllers, low-cost graphics displays using PMP, capacitive-touch keypads using CTMU, USB device peripherals (via the companion PIC32MX USB parts), industrial sensor nodes, and audio codec front-ends using I2S. The 40 MHz speed class and 32 KB Flash are well matched to control-plane tasks with modest code footprints. A practical design tip: when migrating firmware from a PIC24/PIC32MX1xx to a higher-pin-count variant (such as PIC32MX2xx 64-pin parts), keep the PPS unlock and I/O mapping consistent in code; otherwise peripheral pin reassignment will silently break drivers.

Cotización Contacto

PIC32MX120F032D-V/TL

PIC32MX120F032D-V/TL - 32-bit 40MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC32MX120F032D-V/TL is a 32-bit MIPS microcontroller featuring a MIPS32 M4K core running up to 40 MHz, with 32 KB Flash and 8 KB SRAM, housed in a 44-pin VTLA (6x6 mm, 0.65 mm pitch) package with an exposed thermal pad. It is qualified to the AEC-Q100 standard for automotive applications and operates from a 2.3 V to 3.6 V supply. A 32-bit microcontroller is a microprocessor whose internal data path, registers, and arithmetic logic unit are 32 bits wide, allowing it to process significantly more data per instruction cycle than 8-bit or 16-bit MCUs. Within the broader taxonomy, the PIC32MX120F032D belongs to the PIC32MX1/2 family, which sits under Microcontrollers -> Microcontroller IC -> 32-bit Microcontroller -> Embedded Controller -> Semiconductor. The '120' sub-family adds USB 2.0 full-speed, PMP graphics interface, and advanced analog peripherals versus the lower-pin PIC32MX1 '110' variants. Key features include up to 21 general-purpose I/O lines, two UART modules with IrDA and LIN support, two I2C and SPI peripherals, a Parallel Master Port (PMP) for graphics or external memory, a 10-bit 1 Msps ADC with up to 13 channels, five 16-bit timers, four DMA channels, separate PLLs for CPU and USB clocks, and configurable Peripheral Pin Select (PPS). The device also offers JTAG and ICSP debugging with trace support. Architecturally, the M4K core supports MIPS16e code compression for up to 40% smaller code footprint, five-stage pipeline, and hardware multiply/divide. The VTLA-44 package provides a low-profile 0.9 mm height suitable for space-constrained automotive and industrial designs. Typical applications include automotive infotainment, body electronics, USB HID peripherals, low-cost graphics HMI, sensor nodes, and industrial control. The wide 2.3V to 3.6V supply range tolerates 3.3V regulated rails commonly used in-vehicle networks. When designing with this part, ensure the VDDCORE pin is decoupled with a 10 uF bulk and 0.1 uF ceramic pair placed within 5 mm of the pin. The exposed thermal pad must be soldered to a continuous ground plane for electrical and thermal performance. Programming voltage on MCLR must not exceed 9 V absolute maximum. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotización Contacto

PIC32MX120F032DT-50I/ML

PIC32MX120F032DT-50I/ML - 50MHz 32-bit MCU, 32KB Flash | Microchip

The Microchip PIC32MX120F032DT-50I/ML is a 32-bit MIPS M4K microcontroller running at 50 MHz, integrating 32 KB of Flash program memory and 8 KB of SRAM, housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. The 'T' suffix designates tape-and-reel packaging, '50' indicates the 50 MHz speed grade, 'I' marks the industrial temperature range, and 'ML' identifies the 44-QFN package. Operating from 2.3 V to 3.6 V, this part is positioned for cost-sensitive embedded applications that need deterministic 32-bit performance without the overhead of larger Cortex-M cores. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals on one die. PIC32MX parts sit in the broader hierarchy of 32-bit microcontrollers -> RISC microcontrollers -> embedded processors -> semiconductors. The PIC32 family uses the MIPS32 M4K architecture, which provides single-cycle hardware multiply/accumulate and a deterministic instruction pipeline well suited to real-time control loops. The 'F' in 'F032' marks Flash-based program memory, while '032' quantifies the Flash density in KB. Key features of this device include the MIPS M4K core delivering 50 DMIPS of throughput, Peripheral Pin Select (PPS) for flexible I/O mapping, two I2S/SPI modules for codec interfacing, a Parallel Master Port (PMP) for graphics or external memory, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing. The device also integrates a 10-bit ADC, multiple UART/I2C/SPI peripherals, five 16-bit timers/counters, and a real-time clock calendar. Boundary-scan (JTAG) and two programming/debug interfaces (ICSP and JTAG) are supported. Architecturally, the PIC32MX1XX/2XX family uses Harvard memory separation with separate Flash and SRAM buses, hardware multiply/divide, and a tightly coupled interrupt controller that yields low-latency response. The 50 MHz core at 1.5 DMIPS/MHz provides roughly 75 DMIPS, ample headroom for PID loops, USB device stacks (where present), and small graphics rendering tasks. PPS allows remapping of nearly every digital peripheral to most digital I/O pins, simplifying PCB routing in space-constrained designs. Typical applications include consumer appliances, low-cost graphical user interfaces, USB-device-capable nodes, sensor hubs, mTouch capacitive button panels, and industrial monitoring. The 32 KB Flash / 8 KB SRAM envelope is sufficient for state-machine control plus a small RTOS, while the 44-QFN footprint fits handhelds and compact industrial modules. Engineers often pair this MCU with the PIC32 family's MPLAB Harmony framework and a small external EEPROM or crypto companion. A key design consideration is the supply voltage: parts in this family are NOT 5 V tolerant on I/O and must be powered between 2.3 V and 3.6 V. When migrating legacy 8-bit PIC designs, plan for a 3.3 V LDO and review the PPS mappings to avoid remapping conflicts during bring-up. This page synthesizes current distributor pricing, drop-in same-family alternatives, and practical design notes that complement - but do not replace - the manufacturer datasheet.

Cotización Contacto

PIC32MX120F032DT-50I/TL

PIC32MX120F032DT-50I/TL - 32-bit 50MHz MCU, 32KB Flash | Microchip

The Microchip Technology PIC32MX120F032DT-50I/TL is a 32-bit MIPS32 M4K PIC microcontroller operating at 50 MHz, integrating 32 KB of Flash program memory and 8 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package. It belongs to the PIC32MX1xx/2xx family, providing an inexpensive entry point into Microchip's MIPS-based 32-bit MCU portfolio. A microcontroller is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals. In the product taxonomy, a PIC32MX device is a 32-bit microcontroller -> microcontroller unit (MCU) -> embedded processor -> semiconductor. Compared with 8-bit PIC16/PIC18 parts, the PIC32MX1xx uses the MIPS32 M4K core to deliver roughly ten times the compute throughput at the same clock rate, while retaining the familiar MPLAB X IDE and Harmony ecosystem. Compared with higher-end PIC32MX3/4/5/6/7 parts, the PIC32MX1xx family omits USB-OTG, Ethernet, and graphics HMI blocks to reduce cost. Key features include 32 KB Flash (32K x 8), 8 KB SRAM, a 10-bit ADC with up to 13 input channels, four 16-bit timers/counters, two I2C, two SPI, two UART, one Parallel Master Port (PMP), 5-bit parallel I/O, and a CTMU for capacitive touch. The integrated 8 MHz internal RC oscillator can be combined with the PLL to derive the 50 MHz system clock, eliminating external crystals in cost-sensitive designs. The -50I speed grade guarantees 50 MHz across the -40C to +85C industrial range. Architecturally, the PIC32MX120 combines a 5-stage pipeline MIPS32 M4K core with a tightly-coupled 32 KB Flash controller and dual-bank Flash memory for live-update applications. Prefetch buffers hide Flash latency, allowing zero-wait-state execution at 50 MHz. Separate peripheral buses keep ADC, USB (FS), and I/O traffic off the CPU bus for predictable interrupt response. Typical applications include consumer electronics user interfaces, USB device peripherals (the device integrates a USB Full-Speed controller), industrial control panels with capacitive touch, low-cost audio processing front-ends, and educational/hobbyist platforms. The compact 6x6 mm VTLA footprint is especially attractive for space-constrained wearable and IoT designs. When designing with this MCU, ensure the VDD/AVDD/VBAT pins each receive a 0.1 uF plus 10 uF decoupling pair and that the VREF+/VREF- pins are bypassed when the internal ADC reference is used. Programming and debug are handled through Microchip's standard 4-wire ICSP interface, fully supported by MPLAB X IDE and the PICkit 3/4 and ICD 4/5 tools. This page synthesizes distributor pricing as of 2026-10-01, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone, giving engineers an actionable single-page reference for sourcing and implementing this PIC32MX1xx part.

Cotización Contacto

PIC32MX120F032DT-I/ML

PIC32MX120F032DT-I/ML - 32-bit MCU 40MHz 32KB Flash QFN-44 | Microchip

The Microchip PIC32MX120F032DT-I/ML is a 32-bit MIPS M4K microcontroller running at 40 MHz with 32 KB Flash and 8 KB SRAM in a 44-pin QFN (8x8 mm) package. Operating from 2.3 V to 3.6 V, it integrates USB 2.0 full-speed, up to 21 general-purpose I/O pins, two UART, two I2C, two SPI, five 16-bit timers, a 10-bit ADC, and a 28-pin Peripheral Pin Select (PPS) for flexible signal routing. The 32 KB Flash supports up to 10K erase/write cycles, while 8 KB SRAM provides on-chip data buffer for USB and graphics stacks. A 32-bit microcontroller (MCU) is a single-chip computer that combines a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a configurable peripheral set. Within the broader taxonomy, this device sits as: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MX1XX/2XX sub-family -> general-purpose USB-equipped tier. Compared with 8/16-bit MCUs, a 32-bit core executes instructions in 32-bit words, typically delivering higher throughput per MHz and richer addressing for embedded-USB, audio, and graphics user interfaces. Key features include a 40 MHz core with 5-stage pipeline, hardware DMA (up to 4 channels), USB 2.0 full-speed with on-chip transceiver, and a 10-bit 1 Msps ADC with up to 13 input channels. The integrated RTCC, CTMU for capacitive touch, and five 16-bit timers/one 32-bit timer allow precise waveform generation, while the PPS system allows digital peripheral pin assignment at runtime. Compared with smaller PIC32MX1xx variants, the 120F032D tier targets cost-sensitive USB applications. Typical applications include USB peripherals (HID, CDC, MSD), low-cost graphics and segment LCD controllers, capacitive touch user interfaces, sensor hubs, and battery-powered industrial nodes. The wide 2.3 V to 3.6 V supply range and integrated USB transceiver simplify designs by removing the need for an external PHY. When designing with this part, ensure the QFN-44 exposed pad is soldered to a sufficiently large copper pour to meet thermal and electrical ground requirements; adequate decoupling of 100 nF and 4.7 uF close to each VDD pin is recommended. According to Microchip datasheet DS60001168L, configuration words must be programmed before USB operation, and PPS registers require unlocking via CFGCON.IOLOCK. This page synthesizes distributor pricing, drop-in package alternatives from the PIC32MX1XX/2XX family, and practical USB/layout design notes that complement the manufacturer datasheet.

Cotización Contacto

PIC32MX120F032DT-V/ML

PIC32MX120F032DT-V/ML - 40MHz 32-bit MCU 32KB Flash | Microchip

The Microchip Technology PIC32MX120F032DT-V/ML is a 32-bit RISC microcontroller from the PIC32MX1xx/2xx family, delivering up to 40 MHz CPU performance in a 44-pin QFN (8x8 mm) package with MIPS32 M4K core architecture. It integrates 32 KB of Flash program memory and 8 KB of SRAM, with Peripheral Pin Select (PPS) functionality that allows flexible remapping of digital peripherals to any I/O pin. Operating voltage spans 2.3 V to 3.6 V with industrial-grade temperature range of -40 °C to +105 °C. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. MCUs sit at the top of the embedded system hierarchy: microcontroller -> embedded processor -> semiconductor IC. Within Microchip's portfolio, the PIC32MX family bridges 8-bit PIC16/PIC18 simplicity with 32-bit ARM-class performance, targeting cost-sensitive applications that need digital signal processing, USB connectivity, or graphics interfaces. Key features of this variant include two I2S/SPI modules for codec and serial communications, a Parallel Master Port (PMP) for graphics and external memory interfacing, a 10-bit Analog-to-Digital Converter with up to 1 Msps sampling rate, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch buttons and sliders. Five 16-bit general-purpose timers provide flexible PWM and event capture. The integrated USB 2.0 full-speed device/host/OTG controller with dedicated DMA enables connectivity designs without external interface ICs. Architecturally, the M4K core executes most instructions in a single cycle and includes a hardware multiply/divide unit and a single-cycle shadow register set for fast interrupt response. The Memory Protection Unit (MPU) and configurable prefetch cache improve Flash access latency. These features deliver less than 0.5 mA/MHz active current consumption, making the device suitable for both line-powered and battery-powered designs. Typical applications include consumer audio peripherals with USB streaming, capacitive touch human-machine interfaces, low-cost graphics terminals using PMP, industrial control panels with mixed signal I/O, and IoT edge nodes requiring USB device connectivity. The 44-pin QFN with 0.65 mm pitch supports compact PCB layouts while exposing 21+ general-purpose I/O pins. When designing with this part, pay attention to the differential 'I' vs 'V' and 'T' suffix: 'I' denotes -40 °C to +85 °C industrial range, 'V' denotes -40 °C to +105 °C extended industrial, and 'T' denotes tape-and-reel packaging. The 'D' in the MPN indicates Flash memory density within the family. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MX120F032DT-V/TL

PIC32MX120F032DT-V/TL - 32-bit MCU, 32KB Flash, 40MHz, 44-VTLA | Microchip

The Microchip Technology PIC32MX120F032DT-V/TL is a 32-bit MIPS32 M4K microcontroller featuring 32KB of Flash program memory, 8KB of SRAM, and a 40 MHz maximum CPU clock speed, housed in a 44-pin VTLA (6x6 mm) surface-mount package with exposed thermal pad. It is part of the AEC-Q100-qualified PIC32MX1xx/2xx 28/36/44-pin family, making it suitable for automotive and industrial applications that require a verified automotive-grade microcontroller. A PIC32MX microcontroller is a 32-bit MIPS-based MCU from Microchip Technology, positioned in the broader hierarchy as a microcontroller -> embedded processor -> semiconductor device. Compared with 8-bit PIC MCUs, PIC32MX devices deliver higher computational throughput, larger linear address space, and richer peripherals while preserving the MPLAB X IDE and Harmony framework ecosystem familiar to PIC developers. Key features include 32 KB Flash (32K x 8), 8 KB RAM, up to 34 general-purpose I/O pins, Peripheral Pin Select (PPS) for flexible signal routing, up to 4 channels of hardware DMA with automatic data-size detection, two UART modules, two I2C modules, two SPI/I2S modules, five 16-bit timers/counters, and a 10-bit ADC with up to 13 input channels. The PIC32MX120F032DT-V/TL operates from 2.3 V to 3.6 V and supports an industrial/automotive temperature range of -40C to +105C (V-temp grade). Connectivity peripherals include I2C, SPI, UART/USART, IrDA, LIN bus, and Parallel Master Port (PMP). Architecturally, the PIC32MX1xx/2xx family uses a single-cycle MIPS32 M4K core with separate bus initiators for CPU and DMA, configurable priority, and separate PLLs for the system clock and USB (where present). PPS decouples digital peripheral inputs and outputs from fixed physical pins, simplifying board layout. The V-temp suffix (-V) and VTLA package code (-TL) identify the automotive-grade -40C to +105C operating range and 6x6 mm VTLA tape-and-reel packaging. Typical applications include automotive body and chassis ECUs, LIN-connected sensor nodes, HVAC controls, industrial sensor hubs, consumer white-goods HMI controllers, and USB device peripherals. The AEC-Q100 qualification, 32 KB Flash, and 8 KB RAM make it well-suited for cost-sensitive nodes that need more performance than 8-bit MCUs but do not require a Cortex-M class processor. When designing with this part, allocate the VTLA exposed thermal pad to a continuous copper pour on the PCB to lower theta-JA. PPS mappings must be configured in software and locked before peripheral use to avoid glitches on output compare and PWM outputs. This page synthesizes distributor pricing, drop-in same-package alternatives, application guidance, and design notes not consolidated in the manufacturer datasheet alone, providing engineers and procurement teams with a single reference for engineering decisions on PIC32MX120F032DT-V/TL designs.

Cotización Contacto

PIC32MX120F064H-I/MR

PIC32MX120F064H-I/MR - 32-bit 50MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC32MX120F064H-I/MR is a 32-bit MIPS32 M4K microcontroller running up to 50 MHz (83 DMIPS), integrating 64 KB Flash and 8 KB SRAM, packaged in a 64-pin QFN (MR) 9x9 mm with an exposed thermal pad. The PIC32MX120F064H-I/MR is a member of the PIC32MX1xx/2xx/5xx family designed for audio/graphics/touch HMI, CAN, USB, and advanced analog applications. What is a PIC32MX microcontroller? PIC32MX is Microchip's line of 32-bit MIPS-based microcontrollers, sitting in the product hierarchy: microcontroller -> 32-bit MCU -> MIPS32 M4K core -> embedded controller. PIC32MX parts combine the performance of the MIPS32 M4K core with Microchip's peripheral ecosystem (PPS, PMP, CTMU) to enable rich human-machine-interface (HMI) designs that 8-bit and 16-bit MCUs cannot deliver. The PIC32MX120F064H variant is the entry-point Flash/RAM density of the family and is positioned for cost-sensitive HMI and connectivity nodes. Key features of the PIC32MX120F064H-I/MR include two I2S modules and four SPI interfaces for codec and serial communications, Peripheral Pin Select (PPS) for flexible pin-function remapping, a Parallel Master Port (PMP) with dual read/write buffers for graphics, an integrated Charge Time Measurement Unit (CTMU) for capacitive touch and precision time measurement, plus 5-bit parallel master port support. The 64-QFN package integrates a thermal pad that lowers theta-JA for continuous HMI workloads. Architecturally, the device combines a single-cycle MIPS32 M4K core with hardware multiply/divide, a multi-vectored interrupt controller, and 5-stage pipeline. Peripherals are clock-gated; PPS allows remapping of digital functions onto most I/O pins, simplifying PCB routing on HMI boards where multiple SPI/I2S instances must coexist with PMP and CTMU I/O. Typical applications include audio player front-ends, low-cost graphics HMI with PMP-driven TFT/LCD, capacitive-touch keypads via CTMU, USB device-class peripherals, CAN-connected industrial sensor nodes, and serial-bridge designs (UART/SPI/I2C) that upgrade legacy 16-bit PIC24 designs without changing the toolchain. Operating voltage is 2.3 V to 3.6 V, suiting 3.3 V system rails. When designing with this part, place a 0.1 uF decoupling capacitor on every VDD/AVDD pin pair and tie the exposed pad (EP) to a continuous ground plane to meet the package's thermal/return-path spec. PPS configuration must be done before peripheral enable or the pins will revert to defaults, which is a common pitfall when porting code from fixed-pin PIC24 designs. This page synthesizes distributor pricing, parametric cross-references, and practical PPS/CTMU design notes not collected in any single manufacturer datasheet, giving engineers a faster path from concept to prototype.

Cotización Contacto

PIC32MX120F064H-V/MR

PIC32MX120F064H-V/MR - 32-bit MCU, 64KB Flash, 40MHz, 64-QFN | Microchip

The Microchip Technology PIC32MX120F064H-V/MR is a 32-bit MIPS32 M4K microcontroller offering 64KB Flash and 8KB SRAM in a 64-pin QFN (9x9 mm) package with extended-temperature -40C to +105C rating. It runs at 40MHz, delivering up to 50 DMIPS, and supports a 2.5V/3.3V operating voltage range with AEC-Q100 automotive qualification. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MX1XX/2XX/5XX family from Microchip sits in the mid-range of 32-bit embedded MCUs, positioned between simple Cortex-M0+ devices and higher-performance application processors, and is widely used in consumer, industrial, and automotive designs where deterministic MIPS-based architecture, MPLAB Harmony ecosystem support, and pin-rich QFP/QFN packages simplify board layout. Key features include two I2S and four SPI modules for codec and serial communication, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, a 10-bit ADC with up to 53 channels depending on package, mTouch capacitive-touch support, an integrated CTMU (Charge Time Measurement Unit), and a wide operating voltage from 2.3V to 3.6V. The MIPS32 M4K core executes most instructions in one cycle, and the dedicated DMA engine offloads data movement from the CPU. The architecture combines a 5-stage pipeline MIPS32 M4K core with tightly-coupled Flash and SRAM, hardware multiply/divide, a 16-bit wide instruction path, and a Peripheral Pin Select engine that maps digital peripherals to almost any I/O pin. The CTMU plus 10-bit ADC provides touch and proximity sensing without external ICs, while PMP plus DMA accelerates parallel LCD control for cost-sensitive graphical HMI. Typical applications include automotive body electronics and HMI, industrial control panels, low-cost graphical displays, USB audio/HID accessories, capacitive-touch user interfaces, and connected sensor nodes where 64KB Flash and 8KB SRAM are sufficient for the application stack. The extended -40C to +105C operating range and AEC-Q100 qualification make this part suitable for underhood and cabin automotive modules. When designing with this device, ensure the 64-pin QFN EP (exposed pad) is soldered to a sufficient copper pour for thermal dissipation - 1 oz copper over at least 1 square inch is recommended for full industrial temperature operation. The PPS function lets remap digital peripherals post-firmware-load, but analog pins have fixed assignments and must be planned at board layout time. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers evaluate, source, and integrate the PIC32MX120F064H-V/MR with confidence.

Cotización Contacto

PIC32MX120F064H-V/PT

PIC32MX120F064H-V/PT - 64KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX120F064H-V/PT is a 32-bit MIPS M4K microcontroller with 64KB Flash and 8KB SRAM, housed in a 64-pin TQFP (10x10 mm) package qualified to AEC-Q100 automotive standards. Operating at 40 MHz (up to 50 MHz / 83 DMIPS), it integrates 64KB program Flash, 8KB RAM, 10-bit ADC up to 1 Msps, two I2S and four SPI peripherals, two I2C ports, five 16-bit timers, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals onto one die. The PIC32MX120 family belongs to the broader category of 32-bit microcontrollers, which sit above 8/16-bit MCUs in performance and target applications requiring complex math (DSP), large code footprints, or rich connectivity. Microchip's PIC32 family is built on the MIPS M4K core, offering deterministic performance, low interrupt latency, and a mature toolchain (MPLAB X, XC32). Automotive-grade parts such as the PIC32MX120F064H-V/PT are AEC-Q100 qualified and support extended temperature grades including -40C to +125C (Grade 1) and -40C to +150C (Grade 0) for under-the-hood deployments. Differentiating features include Peripheral Pin Select (PPS) for flexible digital I/O remapping, a Parallel Master Port (PMP) with dual read/write buffers for graphics or external memory interfacing, USB 2.0 full-speed OTG, CAN 2.0B, and a 16-bit parallel master port. The CTMU block enables robust capacitive touch measurement without external circuitry, making the device well-suited for HMI panels. The 64-pin TQFP (10x10 mm) footprint is the same as many other PIC32MX1/2/5XX 64-pin family members, simplifying board reuse across the family. Typical applications include automotive body and gateway controllers, HMI panels with capacitive touch, industrial sensor hubs, low-cost audio peripherals via I2S, USB devices, and CAN-connected ECUs. The combination of CAN, USB, PMP, and mTouch makes the part a versatile bridge MCU for infotainment, climate control, and lighting modules. When designing with this device, ensure VDD decoupling is generous (100 nF + 4.7 uF per pin pair), the ICSP pins (PGECx/PGEDx) are accessible for production programming, and the Trace/JTAG pins are not left floating. The PPS feature requires careful peripheral mapping during code bring-up to avoid pin conflicts. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes that go beyond the manufacturer's datasheet, helping engineers compare parts and select the right variant for their automotive or industrial design.

Cotización Contacto

PIC32MX120F064HT-50I/MR

PIC32MX120F064HT-50I/MR - 32-bit 50MHz MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX120F064HT-50I/MR is a 32-bit MIPS32 M4K microcontroller running at up to 50 MHz (83 DMIPS), integrating 64 KB Flash and 8 KB SRAM in a 64-pin QFN (MR, 9x9 mm) package. It targets cost-sensitive embedded designs that need graphical user interfaces, audio codec interfaces, and rich serial connectivity in a single low-power MCU. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals such as timers, ADCs, and communication interfaces. PIC32MX1xx parts belong to the MIPS32-based PIC32MX family, which sits between 8-bit PIC MCUs and higher-end Cortex-M parts in Microchip's portfolio. They are widely used for USB device, graphics, and audio applications where deterministic interrupt response and low BOM cost are required. Key features of this device include Peripheral Pin Select (PPS), which remaps most digital peripherals to any I/O, a Parallel Master Port (PMP) with dual buffers for graphics and external memory, two I2S modules plus four SPI/I2S-capable serial interfaces for audio codecs, a 10-bit 1 MSPS ADC with up to 28 channels, five 16-bit timers, RTCC, and CTMU for capacitive touch. The 'I' suffix denotes an industrial -40C to +85C operating range and '50' denotes 50 MHz maximum core clock. Architecturally, the PIC32MX120F064H uses the MIPS M4K 32-bit core with single-cycle multiply, hardware divide assist, 5-stage pipeline, and a tightly coupled prefetch module that hides Flash latency. The 64 KB single-panel Flash and 8 KB RAM are adequate for small RTOSes (FreeRTOS, OpenRTOS) and USB device stacks. DMA moves peripheral-to-memory traffic without CPU intervention, freeing cycles for application code. Typical applications include low-cost graphical HMI with segmented or small TFT displays, USB audio class (UAC 1.0) headsets and USB HID peripherals, sensor hubs with I2C/SPI device aggregation, and industrial control panels with capacitive touch buttons. The wide peripheral set also supports basic motor control loops via PWM and quadrature encoder interfaces. Designers should budget Flash endurance (typical 20k cycles) and RAM headroom for stack growth under RTOS, and reserve one timer for the RTCC when implementing low-power sleep modes. The MR package has an exposed pad that must be soldered to a sufficient copper pour for thermal dissipation. This page synthesizes distributor pricing, drop-in alternative MPNs, and design notes not found in the manufacturer datasheet alone, helping procurement and design engineers evaluate the PIC32MX120F064HT-50I/MR with context.

Cotización Contacto

PIC32MX120F064HT-I/MR

PIC32MX120F064HT-I/MR - 32-bit MCU, 64KB Flash, 40MHz, QFN-64 | Microchip

The Microchip Technology PIC32MX120F064HT-I/MR is a 32-bit MIPS32 M4K microcontroller with 64 KB Flash and 8 KB RAM, operating up to 40 MHz, housed in a 64-pin QFN (9x9 mm) package with an exposed thermal pad. It is part of Microchip's PIC32MX1xx/2xx family of low-cost 32-bit MCUs optimized for connected and general-purpose embedded designs. A PIC32MX microcontroller is a 32-bit flash MCU based on the MIPS32 M4K core. It belongs to the broader category of microcontrollers -> 32-bit MCUs -> embedded controllers -> semiconductors. PIC32MX parts combine the simplicity of the PIC ecosystem (MPLAB X IDE, Harmony framework, Peripheral Pin Select) with deterministic real-time performance, distinguishing them from Cortex-M parts which use a different ISA but overlap in target applications. Key features include up to 50 MHz/83 DMIPS core speed, 64 KB Flash program memory, 8 KB SRAM, integrated USB 2.0 full-speed OTG/device/host, two I2S and four SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible pin mapping, and a Parallel Master Port (PMP) with dual buffers for graphics interfaces. The device operates from 2.3V to 3.6V and includes a 10-bit ADC and a CTMU for capacitive touch. The PIC32MX1xx/2xx architecture integrates a hardware multiply/divide unit, single-cycle bit manipulation, and a 5-stage pipeline. The CTMU (Charge Time Measurement Unit) enables low-cost capacitive touch sensing, while PPS allows most digital peripherals to be remapped to nearly any I/O pin, simplifying PCB layout. The 64-QFN exposed pad provides low thermal resistance and a compact footprint for space-constrained designs. Typical applications include USB peripherals (HID, CDC, mass storage), audio playback and recording using I2S codecs, low-cost graphics with PMP-driven TFTs, consumer electronics such as wearables and small appliances, and IoT edge nodes. Industrial uses include HMI panels, sensor hubs, and battery-powered instrumentation. When designing with this device, place the exposed thermal pad on a copper pour of at least 1 square inch to meet thermal and electrical grounding requirements. Ensure proper decoupling (100 nF + 10 µF) within 5 mm of each power pin. The 'T' suffix indicates Tape & Reel packaging; the 'I' indicates the -40 °C to +85 °C industrial temperature grade. For code development, use MPLAB X IDE with the XC32 compiler and MPLAB Harmony for peripheral drivers and middleware. This page synthesizes distributor pricing, same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MX120F064HT-I/PT

PIC32MX120F064HT-I/PT - 32-bit 40MHz MCU 64KB Flash TQFP-64

The Microchip Technology PIC32MX120F064HT-I/PT is a 32-bit MIPS MCU from the PIC32MX1/2/5 family, featuring a MIPS32 M4K core running at 40 MHz with 64 KB of Flash and 8 KB of SRAM, housed in a 64-pin TQFP (PT) package rated for the industrial temperature range. The 'T' suffix indicates Tape and Reel packaging, and the -I suffix denotes the -40 C to +85 C industrial grade. A 32-bit microcontroller (MCU) is a programmable system-on-chip integrating a CPU core, memory, and peripherals on a single die. 32-bit MCUs based on the MIPS architecture target cost-sensitive embedded applications requiring higher computational throughput than 8-bit or 16-bit alternatives, while remaining simpler than application processors. The PIC32MX120 family occupies the low-end of the PIC32 lineup, optimized for USB-less, cost-sensitive designs that still benefit from DSP and 32-bit arithmetic. Key features include 64 KB Flash with self-programming support, 8 KB SRAM, two I2S and four SPI modules for audio codec and serial communication, Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) with dual buffers for graphics interfaces, an integrated 10-bit ADC, and the Charge Time Measurement Unit (CTMU) for touch sensing. The device operates from 2.3 V to 3.6 V and offers multiple power-saving modes. The architecture combines a 5-stage MIPS32 M4K pipeline with single-cycle multiply and hardware divide, achieving 1.56 DMIPS/MHz. Code execution is enhanced by a 4-channel DMA controller, dual I2C, two UART modules with IrDA support, and an RTCC for timekeeping. The PMP and CTMU peripherals distinguish this family in graphics and capacitive touch applications. Typical applications include consumer electronics with audio playback, industrial control panels with capacitive touch keypads, low-cost graphical user interfaces via PMP to LCD controllers, USB host/device replacement using UART bridges, and home appliance control boards. Designers choose this part for cost-optimized 32-bit processing where USB and CAN are not required. When designing with this device, note that PIC32MX1xx parts do not include USB or CAN peripherals; migrate to PIC32MX2xx for USB, PIC32MX4xx for CAN+USB, or PIC32MX5xx/6xx/7xx for higher performance. The PT (TQFP-64) package requires a 10 mm x 10 mm PCB footprint with standard 0.5 mm pitch, enabling hand-reworkability for prototyping.

Cotización Contacto

PIC32MX120F064HT-V/MR

PIC32MX120F064HT-V/MR - 40MHz 32-bit MCU, 64KB, QFN-64 | Microchip

The Microchip Technology PIC32MX120F064HT-V/MR is a 32-bit MIPS M4K microcontroller running at 40 MHz with 64 KB Flash and 8 KB RAM, housed in a 64-pin QFN (9x9 mm) package with automotive AEC-Q100 qualification and tape-and-reel packaging. It integrates a 10-bit ADC, I2S, CTMU, UART, and DMA peripherals in a low-power MIPS32 core architecture designed for deterministic embedded control. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as ADC, timers, and communication interfaces. Microcontrollers form the lowest tier of the embedded computing hierarchy: MCU -> embedded processor -> system-on-chip (SoC) -> microprocessor, and serve as the decision-making element in everything from appliances to automotive ECUs. The 32-bit class specifically delivers higher arithmetic throughput and address space than 8/16-bit MCUs, while remaining more power-efficient and lower-cost than application processors. Key features of the PIC32MX120F064HT-V/MR include 64 KB (64K x 8) Flash, 8 KB SRAM, a 10-bit 1 Msps ADC, I2S audio interface, CTMU (Charge Time Measurement Unit) for capacitive touch, PMP (Parallel Master Port), UART, I2C, and SPI peripherals, plus DMA for offloading core data movement. Operating voltage spans 2.5V-3.6V with industrial temperature grade (-40C to +105C). The device uses the proven MIPS32 M4K Harvard architecture with single-cycle multiply and hardware divide, supporting Microchip's MPLAB Harmony and XC32 toolchains. Debug is via 2-wire ICSP using any PGECx/PGEDx pair, making prototype bring-up simple with MPLAB Snap or ICD programmers. Typical applications include industrial control panels, automotive body and lighting modules, consumer audio accessories (the I2S port supports external DACs), capacitive touch user interfaces via CTMU, and low-power IoT sensor nodes. The AEC-Q100 qualification supports automotive deployment. When designing, ensure all VSS/VDD pairs are properly decoupled and trace lengths to the 40 MHz crystal are minimized. Verify PGECx/PGEDx pair selection in your ICSP footprint, since the PIC32MX120F064H exposes multiple pairs. This page synthesizes distributor pricing, AEC-Q100 context, and drop-in PIC32MX alternatives that XAIPART's standard datasheet and inspector workflows do not aggregate in one view.

Cotización Contacto

PIC32MX130F064B-I/SS

PIC32MX130F064B-I/SS - 40MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX130F064B-I/SS is a 32-bit RISC microcontroller built on the MIPS32 M4K core, running at 40 MHz with 64 KB of Flash and 16 KB of SRAM, housed in a 28-pin SSOP package. The part integrates two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible pin mapping, a Parallel Master Port (PMP) for graphics interfaces, and on-chip temperature measurement. Active CPU current is kept below 0.5 mA/MHz, while Charge Time Measurement Unit (CTMU) supports mTouch capacitive touch buttons and sliders with 1 ns high-resolution time measurement. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program memory, data memory, and a set of on-chip peripherals into a single chip. Within the broader category hierarchy, the PIC32MX130F064B-I/SS belongs to the 32-bit MCU family, which in turn falls under microcontrollers (MCU), under Integrated Circuits, under semiconductors. The PIC32MX1xx/2xx family is Microchip's entry-level 32-bit MCU line, targeting cost-sensitive applications that need more performance than 8/16-bit MCUs can deliver but do not require the higher pin count or features of the PIC32MZ family. Key features of the PIC32MX130F064B-I/SS include a 2.3 V to 3.6 V supply voltage range (single 2.5 V/3.3 V operation), 21 I/O ports, 5 general-purpose 16-bit timers, an on-chip temperature sensor, and full MIPS32 M4K instruction-set compatibility for code portability across the family. The PPS block decouples peripheral pin assignments from physical pins, simplifying PCB layout and BOM management. The CTMU provides the constant-current source needed for both mTouch capacitive sensing and 1 ns edge-time-stamping on capture inputs. Architecture is a single-cycle MIPS32 M4K 5-stage pipeline with hardware multiply/divide and a configurable prefetch cache. The bus matrix splits Flash (64 KB) and SRAM (16 KB) into separate program/data paths, allowing DMA and CPU to operate concurrently without stalling. PMP can drive external graphics LCDs or FIFOs in master mode. Typical applications include low-cost 32-bit control nodes in industrial automation, graphics front panels with simple monochrome/color LCDs driven by PMP, mTouch capacitive user interfaces for white goods and audio panels, audio decoder panels via the two I2S modules, and low-power sensor hubs where the <0.5 mA/MHz active current helps meet energy budgets. Industrial-grade -40°C to +85°C operation also makes it a fit for factory-floor equipment. When designing with this part, choose decoupling per the datasheet (typically 0.1 µF + bulk) and assign PPS mappings early in firmware - changing them after the PCB is laid out is impossible without re-spin. The internal 8 MHz RC oscillator with PLL can drive the 40 MHz core, eliminating an external crystal in cost-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MX130F064B-V/ML

PIC32MX130F064B-V/ML - 32-bit MCU 64KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX130F064B-V/ML is a 32-bit RISC microcontroller based on the MIPS32 M4K core running at 40 MHz, featuring 64 KB of Flash program memory and 16 KB of SRAM, housed in a 28-pin QFN (ML) package with 6x6 mm body and 0.65 mm pitch. The -V temperature grade denotes an automotive, AEC-Q100 qualified operating range from -40 C to +105 C, supporting both 2.3 V and 3.3 V supply rails typical of in-vehicle and industrial systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. PIC32MX devices belong to the Microchip PIC32 family -> MIPS32-bit MCU hierarchy -> 32-bit microcontroller -> embedded processor, providing a deterministic alternative to ARM Cortex-M parts with mature MPLAB X IDE and Harmony ecosystem support. Key features of the PIC32MX130F064B-V/ML include two I2S/SPI modules for codec and serial audio, Peripheral Pin Select (PPS) for remappable digital I/O, a Parallel Master Port (PMP) for graphics and external memory interfaces, five 16-bit general-purpose timers, a 10-bit 1 Msps ADC with up to 13 channels, and a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch buttons and sliders. The device integrates on-chip temperature measurement with 1 ns high-resolution time capture. The architecture combines a five-stage pipelined MIPS32 M4K core executing most instructions in one cycle, with a dedicated bus matrix connecting Flash, SRAM, and peripherals to maintain throughput. The USB 2.0 full-speed device interface, combined with audio and graphics peripherals, makes the PIC32MX130F064B well suited to human-machine-interface nodes. Typical applications include automotive infotainment panels, CAN/LIN body controllers, USB audio peripherals, graphic LCD control, capacitive touch user interfaces, and low-cost industrial control boards requiring USB device connectivity. The QFN-28 (ML) footprint is footprint-compatible with the rest of the PIC32MX1xx/2xx 28-pin QFN family. Design consideration: route the ICSP PGECx/PGEDx pair to a dedicated debug header. Use PPS to map peripheral signals to the most convenient pins and minimize trace crossings on the PCB. Provide a 10 uF bulk plus 100 nF decoupling capacitor close to every VDD pin. This page synthesizes distributor pricing, pin-compatible alternatives in the same QFN-28 footprint, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC32MX130F064B-V/SO

PIC32MX130F064B-V/SO - 32-bit MCU 64KB Flash 40MHz 28-SOIC | Microchip

The Microchip Technology PIC32MX130F064B-V/SO is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering up to 40 MHz CPU performance with 64 KB Flash and 16 KB SRAM in a 28-pin SOIC wide-body package. It supports 2.3 V to 3.6 V operation, offers 21 general-purpose I/O pins, and integrates two I2S/SPI modules, a Parallel Master Port (PMP), Peripheral Pin Select (PPS), and a 10-bit ADC capable of up to 1 Msps. A 32-bit microcontroller (MCU) is a microprocessor that integrates CPU, memory, and peripherals on a single silicon die. PIC32MX1XX/2XX family parts sit in Microchip's mid-range 32-bit MCU hierarchy: PIC32MX1XX/2XX -> PIC32MX family -> MIPS32 M4K architecture -> 32-bit microcontrollers -> microcontrollers -> embedded processors. Compared with 8-bit PIC16/PIC18 MCUs, the PIC32MX1XX/2XX family delivers higher code density and DSP-class arithmetic, at the cost of greater die area and typically higher price per unit. Compared with ARM Cortex-M0/M0+ devices, the PIC32MX offers mature Microchip MPLAB X toolchain support and pin compatibility across the family, simplifying migration between memory sizes. Key features of the PIC32MX130F064B-V/SO include 1.1 DMIPS/MHz core performance, less than 0.5 mA/MHz active current, an integrated on-chip temperature sensor, a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch and high-resolution 1 ns time measurement, and a USB 2.0 Full-Speed Device peripheral. The PMP enables graphics and external memory interfaces, while PPS allows flexible digital peripheral routing to any I/O pin, simplifying PCB layout. The architecture combines a 5-stage pipeline MIPS32 M4K core with tightly coupled SRAM, Flash, and a peripheral bridge. The device supports industrial-grade -40 °C to +105 °C operation in this V-temperature variant, with 16 KB SRAM and 64 KB Flash in this F064B configuration. The ADC, comparators, and CTMU make the device a strong fit for mixed-signal embedded applications. Typical applications include consumer audio docks with USB connectivity, low-cost graphics terminals using PMP, capacitive touch human-machine interface (HMI) panels, industrial sensor hubs with on-chip temperature measurement, and portable medical peripherals that require USB device connectivity. The combination of PPS, CTMU, and mTouch support also enables low-cost user-interface subsystems. When designing with this part, ensure decoupling per datasheet recommendations and follow Microchip's ICSP programming guidelines: any PGECx/PGEDx pin pair may be used for in-circuit serial programming, but both pins of the chosen pair must be used together. The wide-body SOIC (-V/SO) package aids hand-soldering and rework in prototyping. This page synthesizes distributor pricing, drop-in PIC32MX1XX/2XX family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MX130F064B-V/SP

PIC32MX130F064B-V/SP - 40MHz 32-bit MCU 64KB Flash SPDIP-28 | Microchip

The Microchip Technology PIC32MX130F064B-V/SP is a 32-bit RISC microcontroller built on the MIPS32 M4K core, operating at up to 40 MHz with 64 KB of Flash and 16 KB of SRAM, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. The -V (Automotive) temperature grade targets -40°C to +125°C operation, suiting it for AEC-Q100 qualified designs and extended-environment industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MX1xx/2xx family sits in Microchip's PIC32 hierarchy: 32-bit MCU → MIPS M4K core → PIC32MX series → general-purpose connectivity family. Within the broader taxonomy it belongs to embedded microcontrollers → microprocessors → semiconductors → integrated circuits, and competes with Cortex-M0/M3 based parts from ST, NXP, and Renesas. Key features include Peripheral Pin Select (PPS) for flexible signal routing, two I2S/SPI modules for audio codec interfacing, a Parallel Master Port (PMP) for graphics and external memory, a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch sensing, 1 ns high-resolution time measurement, and on-chip temperature measurement. The device runs from 2.3 V to 3.6 V and consumes less than 0.5 mA/MHz active, balancing throughput with low power draw. The M4K core executes most instructions in one cycle and includes a 5-stage pipeline, single-cycle multiply, and a hardware prefetch module that masks Flash wait states at 40 MHz. The 64 KB Flash is partitioned for boot-loader-friendly operation, and 16 KB SRAM plus DMA support help offload the core in data-mover applications such as USB, UART bridges, and audio streaming. Typical applications include automotive body and HMI modules, USB audio devices, low-cost graphics terminals using PMP, capacitive touch key/slider front panels, sensor hubs with CTMU, and industrial controllers requiring AEC-Q100 grade parts. The 28-pin SPDIP footprint simplifies prototyping and field-replacement workflows, especially in development and educational environments. When designing with this MCU, plan decoupling around each VDD/VSS pair and route the 40 MHz crystal traces symmetrically with a ground guard ring. For automotive deployments use the -V grade variant (this part) and validate against AEC-Q100 stress profiles. For USB applications, populate the on-chip transceiver's required external resistor and ESD protection per the family data sheet. This page synthesizes distributor pricing, drop-in pin-compatible alternatives (including same-package PIC32MX130 variants and temperature-grade variants), and practical design notes not found in the manufacturer datasheet, giving engineers an information gain over Microchip's product page.

Cotización Contacto

PIC32MX130F064B-V/SS

PIC32MX130F064B-V/SS - 40MHz 32-bit MCU 64KB Flash 28-SSOP

The Microchip Technology PIC32MX130F064B-V/SS is a 32-bit RISC microcontroller built on the MIPS32 M4K core, running at up to 40 MHz with 64 KB Flash and 16 KB SRAM, housed in a 28-pin SSOP package and qualified to the AEC-Q100 automotive standard. It targets cost-sensitive embedded designs that need USB 2.0 full-speed, audio I2S, and a Parallel Master Port (PMP) for graphics without the overhead of larger pin-count PIC32MX1xx/2xx variants. A microcontroller (MCU) is a single-chip computer integrating a CPU core, program and data memory, peripherals, and I/O on one piece of silicon. The PIC32MX130 sits in Microchip's PIC32 family, which spans 32-bit MIPS cores used for USB, graphics, and audio applications; within that family it belongs to the PIC32MX1xx/2xx sub-series aimed at cost-constrained general-purpose designs. The PIC32MX130F064B-V/SS therefore functions as a complete system-on-chip for USB devices, audio playback, and small graphics HMI. Key features include a 40 MHz core with less than 0.5 mA/MHz active current, two I2S/SPI modules for codec interfacing, Peripheral Pin Select (PPS) for flexible signal routing, five 16-bit timers, a 10-bit 1 Msps ADC with up to 13 channels, an on-chip temperature sensor, mTouch capacitive touch support, and CTMU charge-time measurement. USB 2.0 full-speed Device/Host/OTG is integrated, and the PMP block enables direct connection to parallel graphics LCDs, simplifying HMI designs. The PIC32MX130F064B-V/SS operates from 2.3 V to 3.6 V and is offered in -40 °C to +105 °C (V) and -40 °C to +85 °C (I) grades. The 28-SSOP package exposes 21 GPIO, all remappable through PPS, allowing trade-offs between UART, SPI, I2C, I2S, and timer pins on the fly. The combination of USB, audio, and PMP in a 28-pin footprint differentiates it from smaller PIC32MX110/MX150 parts and from external-USB PIC24 alternatives. Typical applications include USB audio headsets and DACs, USB HID peripherals, low-cost graphics LCD HMI panels, mTouch capacitive button interfaces, AEC-Q100 body and infotainment sub-modules, and industrial sensor hubs requiring USB device connectivity. The 64 KB Flash / 16 KB SRAM balance suits small USB stacks plus application code. When designing with this device, choose a 3.3 V LDO capable of at least 60 mA peak (USB-active transients) and place decoupling within 2 mm of each VDD/VSS pair. For USB, route D+/D- as a 90-ohm differential pair and add 15 kohm pull-downs on each line as required by the USB 2.0 specification. This page synthesizes distributor pricing, drop-in PIC32MX130/MX150/MX170 same-package alternatives, and PCB layout notes for USB and PMP graphics interfaces not consolidated in the Microchip datasheet alone.

Cotización Contacto

PIC32MX130F064BT-I/ML

PIC32MX130F064BT-I/ML - 40MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX130F064BT-I/ML is a 32-bit MIPS32 M4K RISC microcontroller running at 40 MHz with 64 KB of Flash and 16 KB of SRAM, housed in a 28-pin QFN (6x6 mm) package. The 'BT' suffix indicates a tape-and-reel, industrial temperature grade, and the 'I/ML' extension specifies the -40C to +85C industrial range in the QFN package. A 32-bit microcontroller (MCU) is an integrated processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. The PIC32MX family sits in Microchip's hierarchy of 32-bit MIPS-based MCUs under the broader PIC microcontroller product line, which itself falls under the semiconductor taxonomy of embedded processors. 32-bit MCUs are typically used when applications require more computational throughput, larger addressable memory, or richer peripheral integration than 8-bit/16-bit MCUs can deliver. Key features include 64 KB Flash program memory, 16 KB SRAM, USB 2.0 full-speed device, two I2S/SPI modules for codec/serial communication, Peripheral Pin Select (PPS) for flexible pin mapping, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, on-chip temperature measurement, and Charge Time Measurement Unit (CTMU) with 1 ns high-resolution time measurement capability. The PIC32MX130 operates from 2.3V to 3.6V with less than 0.5 mA/MHz active current consumption. The PIC32MX130 uses a 5-stage pipeline MIPS32 M4K core with single-cycle multiplication, hardware multiply-accumulate, and an instruction set that is highly optimized for C code density. The integrated USB 2.0 full-speed device, combined with PMP for TFT/LCD graphics, makes the PIC32MX130 a strong fit for low-cost graphical user interfaces with USB connectivity. Typical applications include consumer audio accessories with USB, low-cost graphical display modules (PMP + TFT), mTouch capacitive touch key panels, USB peripherals, industrial sensor nodes with on-chip temperature compensation, and embedded control in home appliances. The 28-QFN package is well suited for space-constrained designs. When designing with this part, plan the Peripheral Pin Select mapping before laying out the PCB, as remapping a peripheral later can require substantial rework. The QFN thermal pad must be soldered to a sufficient copper pour to meet the datasheet thermal derating curves.

Cotización Contacto

PIC32MX130F064BT-I/SS

PIC32MX130F064BT-I/SS - 40MHz 32-bit MCU, 64KB Flash | Microchip

The Microchip Technology PIC32MX130F064BT-I/SS is a 32-bit MIPS32 M4K RISC microcontroller running at 40 MHz, integrating 64 KB of Flash and 16 KB of SRAM in a 28-pin SSOP package. It is part of the PIC32MX1XX/2XX family of low-power 32-bit MCUs aimed at audio, graphics, USB, and advanced analog applications. With Peripheral Pin Select (PPS), parallel master port (PMP), two I2S/SPI modules, and a 1 ns high-resolution timer, the device bridges cost-sensitive 8/16-bit designs and high-performance 32-bit processing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals on one die. The PIC32MX130 family sits in the hierarchy: microcontroller -> embedded processor -> 32-bit MCU -> MIPS RISC core -> PIC32 family. It targets designs that need deterministic real-time control plus the bandwidth of a 32-bit instruction set, while staying within tight power and cost envelopes. Key differentiating features of the PIC32MX130F064BT-I/SS include its 21 general-purpose I/O pins, 5 sixteen-bit timers (plus two additional 16-bit timers), up to 5 PWM channels, a 10-bit 1 Msps analog-to-digital converter with up to 13 input channels, and a Charge Time Measurement Unit (CTMU) that supports mTouch capacitive-touch buttons and sliders. It also provides a parallel master port for graphics interfaces, an on-chip temperature sensor, and supply-voltage operation from 2.3 V to 3.6 V with sub-0.5 mA/MHz active current. Architecturally, the M4K core implements the MIPS32 instruction set with single-cycle multiply, hardware divide assist, and a five-stage pipeline. Flash is prefetched through a 16-word cache, which lets the CPU approach 40 MHz effective throughput even on Flash-resident code. PPS allows most digital peripherals to be remapped to almost any I/O pin, decoupling PCB layout from firmware decisions - a major advantage for compact boards. Typical applications include consumer audio peripherals (codecs, MIDI, DSP front-ends), low-cost graphics HMI with PMP-driven LCDs, USB HID/CID devices, capacitive-touch user interfaces, and industrial sensor hubs where the CTMU and 1 ns timer enable precision measurement. The wide 2.3 V-3.6 V supply range also supports battery-powered IoT nodes running from a single Li-ion cell. When laying out this MCU, route the 2.3-3.6 V decoupling network close to VDD/VSS pairs and reserve a clean ground pour under the SSOP body. The -I grade supports industrial -40C to +85C operation; choose the -V grade if the design must survive -40C to +105C. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MX1XX family, and practical design notes that go beyond what is found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MX130F064BT-V/ML

PIC32MX130F064BT-V/ML - 32-bit MCU 64KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX130F064BT-V/ML is an automotive-grade 32-bit MIPS32 M4K RISC microcontroller integrating 64KB Flash and 16KB SRAM with a 40MHz core, packaged in a 28-pin QFN (6x6 mm) with exposed pad. It operates from 2.3V to 3.6V across an extended -40C to +105C automotive temperature range and is AEC-Q100 qualified, making it suitable for harsh-environment automotive and industrial designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX1XX/2XX family sits within Microchip's broader PIC32MX microcontroller portfolio, positioned between the PIC24 16-bit MCUs and the higher-performance PIC32MZ/MK families. The M4K core executes most instructions in one clock cycle, giving benchmark-class integer performance at moderate clock rates and very low power consumption under 0.5 mA/MHz typical. Key features include two I2S/SPI modules for audio codec and serial communication, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics interfaces, and a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch buttons and sliders with 1 ns time-measurement resolution. The on-chip 10-bit ADC and integrated temperature sensor reduce external BOM, while five 16-bit general-purpose timers plus a 5V-tolerant I/O structure simplify mixed-voltage system design. Architecturally, the device uses a Harvard-style bus with separate Flash and SRAM paths and hardware multiply/divide for deterministic interrupt response. The 40 MHz core, combined with the 5-stage pipeline, delivers roughly 1.56 DMIPS/MHz efficiency, allowing DSP-style audio processing and protocol stacks to run on a single chip. The exposed thermal pad on the 28-QFN package is essential for dissipation at the 105C automotive ceiling. Typical applications include automotive body electronics and HMI modules, low-cost audio peripherals with I2S codecs, capacitive touch human-machine interfaces using mTouch, industrial sensor nodes with serial interfaces, and consumer devices that need USB or graphics via PMP. The combination of low power, deterministic interrupt latency, and AEC-Q100 qualification broadens deployment into safety-relevant subsystems. When designing with this MCU, allocate a continuous copper pour under the exposed pad to keep junction temperature within the -40C to +105C range, and follow Microchip's recommended 8 MHz external crystal plus PLL configuration for full 40 MHz operation. Use the PPS feature to remap peripherals and avoid pinout conflicts across the PIC32MX1XX/2XX family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC32MX130F064BT-V/SO

PIC32MX130F064BT-V/SO - 40MHz 32-bit MCU, 64KB Flash, 28-SOIC

The Microchip Technology PIC32MX130F064BT-V/SO is a 32-bit MIPS32 M4K RISC microcontroller running at 40 MHz with 64 KB Flash and 16 KB RAM, housed in a 28-pin SOIC package and qualified to AEC-Q100 for automotive applications. The part operates from 2.3V to 3.6V, with up to 21 general-purpose I/O pins, and consumes less than 0.5 mA/MHz under typical conditions across an industrial/automotive temperature range of -40C to +105C. The "T" suffix indicates Tape and Reel packaging, while the "V" suffix designates the automotive temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals into one IC. The PIC32MX1xx/2xx family sits in the 32-bit microcontroller hierarchy as: 32-bit MCU -> MIPS M4K core -> PIC32MX family -> Microchip 8/16/32-bit portfolio -> embedded microcontrollers. Compared with 8-bit/16-bit MCUs, 32-bit devices provide higher computational throughput, larger address space, and richer peripherals for connected, graphical, and audio products. Key features of the PIC32MX130F064BT-V/SO include the MIPS32 M4K core with single-cycle multiply, Peripheral Pin Select (PPS) for flexible I/O mapping, two I2S/SPI modules for codec and serial communications, a Parallel Master Port (PMP) for graphics interfaces, Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch buttons and sliders, 1 ns high-resolution time measurement, on-chip temperature measurement, and 5 general-purpose 16-bit timers plus 2 input capture modules. These features are typically not all available simultaneously on competing 32-bit MCUs at this price point. The PIC32MX130F064BT-V/SO is intended for cost-sensitive 32-bit applications in automotive body electronics, consumer audio, low-cost graphical HMIs, and industrial control. Its PPS remapping, PMP interface, and dual I2S peripherals make it well suited for small color TFT displays with audio playback, while its AEC-Q100 grade and wide temperature range fit under-hood and cabin automotive ECUs.

Cotización Contacto

Subcategorías

Productos (32762)

PIC32MX120F032D-I/TL - 32-bit MCU 32KB Flash 40MHz 44-VTLA | Microchip

PIC32MX120F032D-V/PT - 32-bit 40MHz MCU, 32KB Flash, 44-TQFP

PIC32MX120F032D-V/TL - 32-bit 40MHz 32KB Flash MCU | Microchip

PIC32MX120F032DT-50I/ML - 50MHz 32-bit MCU, 32KB Flash | Microchip

PIC32MX120F032DT-50I/TL - 32-bit 50MHz MCU, 32KB Flash | Microchip

PIC32MX120F032DT-I/ML - 32-bit MCU 40MHz 32KB Flash QFN-44 | Microchip

PIC32MX120F032DT-V/ML - 40MHz 32-bit MCU 32KB Flash | Microchip

PIC32MX120F032DT-V/TL - 32-bit MCU, 32KB Flash, 40MHz, 44-VTLA | Microchip

PIC32MX120F064H-I/MR - 32-bit 50MHz 64KB Flash MCU | Microchip

PIC32MX120F064H-V/MR - 32-bit MCU, 64KB Flash, 40MHz, 64-QFN | Microchip

PIC32MX120F064H-V/PT - 64KB Flash 32-bit MCU | Microchip

PIC32MX120F064HT-50I/MR - 32-bit 50MHz MCU 64KB Flash | Microchip

PIC32MX120F064HT-I/MR - 32-bit MCU, 64KB Flash, 40MHz, QFN-64 | Microchip

PIC32MX120F064HT-I/PT - 32-bit 40MHz MCU 64KB Flash TQFP-64

PIC32MX120F064HT-V/MR - 40MHz 32-bit MCU, 64KB, QFN-64 | Microchip

PIC32MX130F064B-I/SS - 40MHz 32-bit MCU 64KB Flash | Microchip

PIC32MX130F064B-V/ML - 32-bit MCU 64KB Flash 40MHz | Microchip

PIC32MX130F064B-V/SO - 32-bit MCU 64KB Flash 40MHz 28-SOIC | Microchip

PIC32MX130F064B-V/SP - 40MHz 32-bit MCU 64KB Flash SPDIP-28 | Microchip

PIC32MX130F064B-V/SS - 40MHz 32-bit MCU 64KB Flash 28-SSOP

PIC32MX130F064BT-I/ML - 40MHz 32-bit MCU 64KB Flash | Microchip

PIC32MX130F064BT-I/SS - 40MHz 32-bit MCU, 64KB Flash | Microchip

PIC32MX130F064BT-V/ML - 32-bit MCU 64KB Flash 40MHz | Microchip

PIC32MX130F064BT-V/SO - 40MHz 32-bit MCU, 64KB Flash, 28-SOIC