Circuitos integrados

PIC32MX320F064HT-40I/MR

PIC32MX320F064HT-40I/MR - 32-bit MCU, 64KB Flash, 40MHz, VQFN-64 | Microchip

The Microchip Technology PIC32MX320F064HT-40I/MR is a 32-bit MIPS M4K microcontroller integrating 64 KB of Flash program memory, 16 KB of SRAM, and a 40 MHz CPU core in a 64-pin 9x9 mm VQFN package with exposed thermal pad. It operates from a 2.3 V to 3.6 V supply and exposes a 10-bit ADC along with the rich PIC32MX3xx/4xx peripheral set including USB, I2C, UART, SPI, PMP, RTCC, and five 16-bit timers. The 'T' suffix indicates tape and reel packaging and the 'I' suffix indicates the industrial -40C to +85C operating temperature range. A PIC32MX3xx/4xx microcontroller belongs to the MIPS M4K 32-bit MCU family from the larger RISC microcontroller category of embedded microcontrollers, which are integrated circuits that combine a CPU core, program memory, RAM, and configurable peripherals on a single die. These 32-bit parts are typically used in industrial control, USB connectivity, graphical user interfaces, and audio processing - where they provide a substantial performance increase and address space over 8-bit and 16-bit predecessors while keeping C-friendly development tools and a familiar MPLAB ecosystem. Key features of this device include 64 KB single-cycle Flash, 16 KB SRAM, 40 MHz / 50 DMIPS core, hardware multiply/divide, 16-channel 10-bit 500 ksps ADC, two I2C, two UART, two SPI, USB 2.0 full-speed device/host/OTG, 53 general-purpose I/O, CTMU touch support, RTCC, five 16-bit timers, and a parallel master port for graphics or external memory. The 64-pin VQFN (9x9 mm) footprint exposes up to 53 I/O and four dedicated high-drive pins for direct LED or MOSFET drive. The industrial temperature grade (-40C to +85C) makes it suitable for non-automotive harsh environments. Architecturally, the PIC32MX320 is a Harvard-style MIPS32 core with separate instruction and data buses feeding unified SRAM via tightly-coupled prefetch modules. The Flash controller is dual-panel and supports runtime self-programming, enabling in-field firmware updates without external bootloader memory. A dedicated DMA engine with four channels can offload ADC and SPI transfers, freeing the CPU for application code and yielding deterministic interrupt latency. Typical uses include internal household appliances, industrial automation HMI, USB peripherals (HID, CDC, mass storage), point-of-sale terminals, and low-cost audio processing. The combination of USB 4.0 OTG, 53 I/O, and graphics-capable PMP makes it a strong fit for color TFT panels and segmented LCDs up to 132 segments. Designers working in this room should budget parallel bus capacitance; PIC18C0 does not have a parallel bus-width buffer, so careful rail traffic-shaping is needed if powering both large blocks simultaneously. When designing with this device, allocate a 1uF ETS-style bulk capacitor plus 100nF SPICE decoupling pair within 5 mm of every VDD/VSS pin pair, and use the exposed pad for robust peripheral connectivity. The CN/RB pins double as change-notification sources; leaving them floating at boot can cause spurious interrupts.

USD $3,79 En stock

PIC32MX320F064HT-40I/PT

PIC32MX320F064HT-40I/PT - 64KB Flash 40MHz 32-bit MCU | Microchip

The Microchip PIC32MX320F064HT-40I/PT is a 32-bit MIPS M4K microcontroller running at 40 MHz with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 64-pin 10x10 mm TQFP (PT) package. The "HT" designator indicates a tape-and-reel surface-mount variant of the 320F064H family. The device delivers up to 53 general-purpose I/O pins, multiple UART/SPI/I2C peripherals, a 10-bit ADC, USB, and a 16-bit timer/capture/compare/PWM module, all integrated in a low-cost industrial-grade part. A 32-bit microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data RAM, and configurable peripherals on a single die. PIC32MX parts use the MIPS32 M4K core, which combines 32-bit ALU performance with a 16-bit instruction encoding to keep code density competitive with 8/16-bit architectures. Within the hierarchy, the PIC32MX320F064HT belongs to PIC32MX3xx/4xx family -> PIC32MX family -> PIC32 microcontroller family -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The 32-bit class dominates wherever deterministic interrupt latency, Ethernet USB access for audio, or 32-bit arithmetic on bitstreams matters for engineers. Key features include 64 KB (64K x 8) Flash program memory, 16 KB SRAM, a 10-bit 16-channel ADC capable of 500 ksps, two UART, two SPI, and two I2C peripherals, plus a USB 2.0 full-speed OTG controller and a Parallel Master Port (PMP) for external bus peripherals. The part operates from 2.3 V to 3.6 V and supports an industrial temperature range of -40 °C to +85 °C. The 40 MHz core delivers approximately 41 DMIPS, enough to host DSPs in audio consumer applications. Architecturally, the PIC32MX320F064HT employs the MIPS M4K 5-stage pipeline core, separate 16 KB instruction and 16 KB data Flash regions, and a 4-channel DMA controller for offloading peripheral transfers. The USB OTG and PMP peripherals make it suitable for decoupling analog and digital grounds where appropriate to maximize ADC performance. Typical applications include USB peripherals (HID, CDC, mass storage), industrial control and sensing nodes, low-cost graphics terminals using PMP, audio consumer accessories, and home automation bridges. The wide peripheral mix and small package suit designs where board space is constrained. When designing with this part, ensure the 0.1 V PVD-controlled BOR threshold is matched to the bus supply range; incorrect settings can leave the part in brown-out during supervisor MPU/sleep transitions. The PIC32MX320F064HT-40I/PT also requires a 64-bit 32-pin bus of PIC32MX270F512LT-I/PT connectivity in high-noise USB environments, which should be monitored for stable MPU operation.

USD $4,16 En stock

PIC32MX320F064HT-40V/MR

PIC32MX320F064HT-40V/MR - 32-bit 64KB Flash 40 MHz MCU | Microchip

The Microchip Technology PIC32MX320F064HT-40V/MR is a 32-bit MIPS32 M4K PIC32MX-series microcontroller featuring 64 KB of Flash program memory, 16 KB of RAM, and a 40 MHz core clock, housed in a 64-lead 9x9 mm VQFN package with tape and reel packaging. It supplies ten performance-grade 10-bit ADC channels with DMA support, designed for 16-bit MCU applications at the broadest band of cost-sensitive embedded industrial systems. A PIC32 MCU is part of the MIPS32 M4K microarchitecture family, which combines a 32-bit RISC instruction set, deterministic interrupt-on-chip features, and peripheral-rich connectivity targeting embedded systems where 16-bit MCU migration to bit-parallel circuit design is critical. PIC32MX3xx/4xx devices fill the role of 32-bit microcontrollers -> 32-bit RISC MCUs -> microcontrollers -> integrated circuits, with the M4K core enabling hardware multiply/divide and single-cycle bit manipulation for deterministic control loops. This family bridges 16-bit MCU range with 32-bit performance, maintaining code-density portability across the bit-mixed-silicon ecosystem. Key features include 64 KB Flash program memory, 16 KB SRAM, 40 MHz operating frequency with 80 MHz equivalent MIPS performance, 53-channel 10-bit ADC with DMA support, USB 2.0 full-speed OTG, two I2C ports, two UART ports, two SPI ports, and one PMP parallel master port. The 40V operating temperature suffix designation indicates -40C to +105C industrial extended grade, supporting both compliance and environmental certification parameters. The 64-VQFN 9x9 mm exposed pad package provides a thermal resistance suitable for 32-bit MCU applications at the broadest band of industrial-grade operating conditions. The PIC32MX320F064H utilizes a MIPS32 M4K RISC core with Harvard architecture, 5-stage pipeline, and hardware multiply/divide unit, achieving 1.56 DMIPS/MHz. The architecture includes dual-bus Flash and SRAM memories with prefetch cache, enabling deterministic interrupt response. The peripheral set integrates USB 2.0 full-speed OTG with on-chip transceiver, parallel master port for external memory, and configurable input pin selector for flexible signal assignment. The variant is also used by 32-bit emitter/cellular IoT application areas where 16-bit slice-and-mixed circuit logic is highly analog-friendly. Typical applications include industrial control systems with PM88698 application board, USB OTG peripheral controllers with HU88698 host board, automotive body area, consumer-network equipment, and multi-protocol protocol plugins. The 64-VQFN hardware permits 16-bit hardware-grade circuits and uses 10-bit hardware-grade means for industrial-grade hardware-priced embedded industrial applications. When designing with this device, ensure 10-bit hardware-grade means of 3.3V hardware-grade signals work for 53-bit hardware-grade pins of 10-bit hardware-grade modes for industrial-grade hardware-priced embedded industrial applications. The HT suffix indicates tape and reel packaging with industrial extended temperature grade, fulfilling hardware-margin for hardware-priced embedded hardware margins.

USD $3,30 En stock

PIC32MX320F064HT-40V/PT

PIC32MX320F064HT-40V/PT - 40MHz 32-bit MCU, 64KB Flash | Microchip

The Microchip PIC32MX320F064HT-40V/PT is a 32-bit MIPS M4K microcontroller running up to 40 MHz, integrating 64 KB of Flash and 16 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm). The device features a 10-bit ADC, DMA controller, USB 2.0 full-speed OTG, and a rich peripheral set including UART, SPI, I2C, and PMP, targeting cost-sensitive embedded designs. A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and on-die peripherals (ADC, timers, communication controllers). Within the broader taxonomy, a microcontroller is a type of embedded processor -> microprocessor -> semiconductor IC. The PIC32MX family bridges 8/16-bit PIC MCU designs to full 32-bit performance with MIPS architecture, while remaining compatible with MPLAB X IDE and the PIC32 peripheral library for migration from older PIC24/PIC32 projects. Key specifications include 40 MHz core clock (50 MHz capable variants exist in the family), 64 KB Flash (64K x 8), 16 KB SRAM, a 10-bit 1 MSps ADC with up to 16 channels, two I2C, two SPI, two UART, a Parallel Master Port (PMP) for graphics/parallel memory, and a USB 2.0 Full-Speed On-The-Go transceiver. The 'V' suffix denotes the 2.3-3.6 V extended operating range, while 'H' denotes TQFP package, and 'T' suffix denotes Tape & Reel. Typical applications include USB peripherals (HID, CDC, mass storage), low-cost graphical HMI with PMP-driven TFTs, industrial control with sensor acquisition via the 10-bit ADC, consumer appliances, and educational/development boards. The 64-pin TQFP footprint is breadboard-friendly and the part is supported by the MPLAB Harmony framework for rapid firmware development. When designing, ensure the USB D+/D- traces are routed as a 90 ohm differential pair, place decoupling capacitors within 3 mm of every VDD/VSS pair, and leave the AVDD pin supplied from a ferrite-filtered analog LDO for clean ADC measurements. JTAG/ICSP programming headers should be reserved for in-field firmware updates.

USD $2,85 En stock

PIC32MX320F064HT-80I/PT

PIC32MX320F064HT-80I/PT - 80MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX320F064HT-80I/PT is a 32-bit MIPS M4K microcontroller operating from 64KB on-chip program memory and 16KB SRAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package. The device runs at 80 MHz core clock with 80 MHz peripheral bus, integrates 64 KB (64K x 8) Flash and 16 KB RAM, and features a 10-bit ADC with multiple channels for mixed analog/digital embedded designs. A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU core, Flash program memory, SRAM, and peripherals on one silicon die; PIC32MX MCUs add 32-bit MIPS M4K RISC performance to Microchip's PIC architecture, sitting between 8-bit PIC16/PIC18 and the higher-end PIC32MZ families in the microcontroller hierarchy: 32-bit MCU -> embedded processor -> microcontroller -> semiconductor. PIC32MX targets cost-effective 32-bit control and connectivity rather than high-end graphics. Key features include 80 MHz core / 80 MHz peripheral bus, 64 KB Flash, 16 KB SRAM, USB 2.0 Full-Speed device/host/OTG controller, up to 53 general-purpose I/O pins, 10-bit 1 Msps ADC with up to 16 channels, four 16-bit timers/counters, two UART modules, two SPI interfaces, and two I2C ports. Industrial-grade temperature range is -40C to +85C, suitable for commercial and light industrial deployments. Architecturally, the PIC32MX320F064H silicon implements the MIPS32 instruction set and supports Microchip's MPLAB Harmony and legacy MPLAB C32 toolchains. The 'T' suffix in the part number denotes tape-and-reel packaging, and '-80I' denotes 80 MHz speed grade with industrial temperature range; pin assignments are compatible across the PIC32MX3xx/4xx 64-pin TQFP family. Typical applications include USB peripherals (HID, CDC, mass storage), industrial control panels, low-end HMI and graphic TFT display controllers, motor control front-ends, sensor aggregation gateways, and consumer embedded devices requiring 32-bit headroom with PIC ecosystem familiarity. When developing with the PIC32MX320F064HT-80I/PT, observe the 2.3 V to 3.6 V supply range and provide adequate decoupling near each VDD/VBAT pin. For USB applications, follow Microchip's USB hardware design guidelines for PCB layout and impedance-controlled routing. This page synthesizes distributor pricing, pin-compatible drop-in alternatives across the PIC32MX family, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a one-stop decision reference.

USD $4,05 En stock

PIC32MX320F064HT-80V/MR

PIC32MX320F064HT-80V/MR - 32-bit MCU 64KB Flash 80MHz | Microchip

The Microchip Technology PIC32MX320F064HT-80V/MR is a 32-bit RISC microcontroller based on the MIPS32 M4K core, featuring 64KB of Flash program memory and 16KB of SRAM, operating at up to 80 MHz in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one device. The PIC32MX family occupies the 32-bit performance tier of Microchip's PIC portfolio, positioned between the 8-bit PIC16/PIC18 line and the higher-end 32-bit PIC32MZ series, and typically used in embedded control, USB device, and graphics applications that exceed 8-bit capability but do not require DSP extensions. Key features include a MIPS32 M4K 32-bit core with 5-stage pipeline, 80 MHz maximum operating frequency yielding 1.56 DMIPS/MHz performance, 64KB Flash with self-programming support, 16KB SRAM, a 10-bit 1 MSPS analog-to-digital converter with up to 16 channels, USB 2.0 full-speed device/host/OTG controller, two I2C, two SPI, and two UART modules, plus a Parallel Master Port for external memory or graphics interfaces. The architecture uses a 5-stage pipeline with separate instruction and data Flash buses to deliver 1.56 DMIPS/MHz, enabling deterministic interrupt response for real-time control loops. The integrated USB 2.0 full-speed On-The-Go controller supports both device and host roles without an external PHY, while the Peripheral Pin Select (PPS) remapping allows flexible assignment of digital peripherals to physical I/O pins. Typical applications include industrial control and HMI panels, USB peripherals such as barcode scanners and HID devices, embedded data acquisition systems, low-cost graphics terminals driving TFT LCDs, and consumer electronics requiring 32-bit performance with low BOM cost. Designers should note that the '80V' suffix indicates the 80 MHz speed grade with V temperature range (-40C to +105C), and the 'T' suffix denotes Tape and Reel packaging. The MR suffix indicates the 64-pin VQFN package, while the parallel PIC32MX320F064H-80V/MR ships in tray packaging. The MR package requires careful thermal pad soldering and 0.5 mm pad pitch layout discipline. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes drawn from the PIC32MX3XX/4XX family datasheet - information not consolidated on any single distributor or manufacturer page.

USD $4,35 En stock

PIC32MX320F128H-80I/MR

PIC32MX320F128H-80I/MR - 80MHz 32-bit MCU 128KB Flash | Microchip

The Microchip PIC32MX320F128H-80I/MR is a 32-bit MIPS M4K microcontroller running up to 80 MHz, integrating 128 KB of Flash program memory and 16 KB of SRAM, and housed in a 64-pin 9x9 mm VQFN package with exposed thermal pad. It is part of the PIC32MX3xx general-purpose family, offering a 10-bit ADC, USB 2.0 full-speed device/host/OTG, multiple UART/SPI/I2C peripherals, and 53 general-purpose I/O pins operating from a 2.5 V to 3.6 V supply. What is a 32-bit PIC microcontroller? A 32-bit PIC microcontroller is a microcontroller built around the MIPS32 M4K core architecture, designed by Microchip Technology. Within the broader taxonomy it sits under microcontroller (MCU) -> embedded controller -> semiconductor device, and it combines a RISC CPU, on-chip Flash, SRAM, and rich peripherals (ADC, timers, communication interfaces) into a single package. The 32-bit datapath gives the PIC32 family a significant performance edge over 8-bit PIC16/PIC18 devices for DSP, USB, and graphics tasks, while remaining code-compatible with the MPLAB X IDE and Harmony ecosystem. Key features of the PIC32MX320F128H-80I/MR include 128 KB Flash organized as 128K x 8, 16 KB SRAM, an integrated USB 2.0 full-speed transceiver supporting device, host, and OTG operation, a 10-bit ADC with up to 16 channels and 1 Msps conversion rate, two I2C, two SPI, and two UART modules, plus five 16-bit timers/counters. The MIPS32 M4K core provides single-cycle multiplication, hardware divide, and a 5-stage pipeline, achieving 1.56 DMIPS/MHz and 80 MHz / 1.33 DMIPS per MHz equivalent throughput, well beyond 8-bit PIC alternatives. In terms of architecture and process, the PIC32MX3xx family uses a 0.18 µm flash process with on-chip voltage regulation to 1.8 V core from a 2.5-3.6 V supply. Peripheral pin select is NOT supported on this generation (it appears from PIC32MX1xx/2xx onwards), but most peripherals have flexible pin mapping through PPS on higher pin counts. The 9x9 mm 64-VQFN package exposes a thermal pad that should be soldered to a sufficient copper pour to keep junction temperature below 125 °C in high-duty-cycle USB or full-clock applications. Typical applications include USB peripherals (HID, CDC, mass storage, audio class), industrial control with USB diagnostics, low-cost graphics HMI with external LCD controller, sensor hubs, and general-purpose 32-bit embedded control in commercial and industrial environments. The combination of USB, 10-bit ADC, and 53 I/O makes it well suited to bridging legacy 8-bit designs to USB-connected products. When designing with this part, ensure that VDDCORE pin is properly decoupled with 10 µF + 0.1 µF capacitors per the datasheet, and that the VBUS, VUSB, and D+/D- traces are routed as a 90 Ω differential pair with correct impedance. The USB internal pull-up must be enabled in firmware for device mode. Industrial-grade (-40 °C to +85 °C) operation is supported by the -80I/MR temperature suffix. This page synthesizes current distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated on a single manufacturer or distributor page, helping engineers evaluate, source, and substitute the PIC32MX320F128H-80I/MR faster.

USD $3,85 En stock

PIC32MX320F128H-80V/MR

PIC32MX320F128H-80V/MR - 32-bit MCU 128KB Flash 80MHz | Microchip

The Microchip Technology PIC32MX320F128H-80V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz with 128 KB of Flash program memory and 16 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It is part of the PIC32MX3xx/4xx general-purpose and USB family and provides 53 general-purpose I/O pins, a 10-bit 1 Msps ADC with up to 16 channels, USB 2.0 full-speed OTG, and four 16-bit timers plus two 32-bit timers. What is a PIC32MX microcontroller? The PIC32MX is Microchip's 32-bit MIPS-based MCU family that bridges the gap between 8/16-bit PIC microcontrollers and 32-bit ARM Cortex-M parts. PIC32MX devices use the MIPS32 M4K core, which combines deterministic interrupt response with higher performance than legacy PIC24/dsPIC DSC devices, while remaining pin-compatible with many PIC24/dsPIC packages. The hierarchy is: microcontroller -> 32-bit MCU -> PIC32 family -> PIC32MX sub-family -> general purpose / USB series. Key features include hardware multiplier/divider for DSP-class math, two I2C, two SPI, and two UART modules, five 16-bit capture inputs and five 16-bit compare/PWM outputs, a 10-bit ADC and a 10-bit analog comparator, Fail-Safe Clock Monitor (FSCM), configurable Watchdog Timer with on-chip low-power RC oscillator, and multiple power-management modes (Run, Idle, Sleep). The VQFN-64 package offers a compact 9x9 mm footprint suitable for space-constrained industrial and consumer designs. Architecturally, the M4K core executes most instructions in a single cycle and includes a hardware multiply/divide unit and a 5-stage pipeline, giving the PIC32MX320F128H class-leading code density for 32-bit performance at near 8-bit cost. Peripherals connect to the core through a separate peripheral bus, simplifying register mapping and allowing deterministic DMA-driven data movement for USB and ADC. Typical applications include USB peripherals, industrial control panels, HMI touch interfaces, consumer audio devices, sensor hubs, and low-cost graphics terminals. The wide operating range and integrated USB 2.0 full-speed make it a frequent choice for upgrading legacy PIC24 designs without changing PCB layout. When designing with this MCU, ensure the VQFN exposed pad is soldered to a sufficiently large ground copper pour to meet thermal and electrical requirements; inadequate thermal pad soldering is the most common cause of PIC32MX VQFN reliability issues. Configure the FSOSC and FNOSC configuration bits carefully and use the Fail-Safe Clock Monitor if the application must tolerate crystal start-up failure. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MX family, and practical design notes not consolidated in the Microchip datasheet (DS61143H) alone.

USD $4,35 En stock

PIC32MX320F128HT-80I/PT

PIC32MX320F128HT-80I/PT - 80MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX320F128HT-80I/PT is a 32-bit MIPS32 M4K microcontroller running up to 80 MHz with 128 KB Flash and 16 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. It belongs to the PIC32MX3xx/4xx family and integrates USB 2.0 full-speed, up to 53 general-purpose I/O, 10-bit ADC, and multiple communication peripherals. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals (ADC, timers, USB, UART, SPI, I2C). PIC32MX parts use the MIPS M4K core, placing them in the broader hierarchy MCU -> microcontroller -> embedded processor -> semiconductor, and they are widely deployed when 8/16-bit parts lack the throughput or memory needed for graphical user interfaces, USB stacks, or real-time control loops. Key features of this part include 128 KB on-chip Flash organized as 128K x 8, 16 KB SRAM, an 80 MHz maximum CPU clock (40 MHz system clock for peripherals), five 16-bit timers/counters, two I2C, two SPI, two UART channels, USB 2.0 full-speed device/host/OTG, a 16-channel 10-bit ADC with 1 Msps, and a parallel master port. The industrial temperature grade (-40C to +85C) and 2.3V-3.6V single supply operation simplify integration into harsh environments. The architecture combines a 5-stage pipelined MIPS32 core with single-cycle multiplication and hardware divide, enabling 1.56 DMIPS/MHz and excellent deterministic interrupt response. The PMD (peripheral module disable) and power-saving modes let idle peripherals draw near-zero current, which is critical for USB bus-powered and battery-backed designs. Typical applications include USB human-interface devices, industrial control and HMI panels, embedded web servers, data loggers, sensor hubs, and low-cost graphics terminals. The 80 MHz performance, USB, and 128 KB Flash cover most mid-range connected-embedded workloads. When designing with this MCU, budget for a 2.3V-3.6V LDO and follow Microchip's recommended decoupling network (100 nF + 10 uF bulk). Always program the device through the ICSP interface using MPLAB X IDE + XC32 compiler; never assume 80 MHz operation without proper PLL configuration. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond what is in the manufacturer datasheet alone.

USD $4,45 En stock

PIC32MX320F128L-80I/BG

PIC32MX320F128L-80I/BG - 80MHz 32-bit MCU, 128KB Flash | Microchip

The Microchip Technology PIC32MX320F128L-80I/BG is a 32-bit RISC microcontroller built on the MIPS32 M4K core, operating at up to 80 MHz, with 128 KB of Flash and 32 KB of SRAM, supplied in a 121-ball TFBGA (10x10 mm) package for compact surface-mount designs. It integrates 128 KB (128K x 8) of Flash program memory alongside 32 KB of data RAM, and the -80I speed grade with industrial -40C to +85C temperature range supports robust operation across embedded environments. A 32-bit microcontroller (MCU) is a programmable processor core, memory, and peripheral set integrated into a single silicon die. Within the broader semiconductor hierarchy, MCUs sit under microprocessors (MP/MPU) but add on-chip Flash, RAM, timers, ADCs, and communication interfaces, making them self-contained compute subsystems. PIC32MX devices extend Microchip's legacy PIC16/PIC24 family into the MIPS32 domain, enabling 80 MHz performance with familiar MPLAB X toolchain support. Key features of the PIC32MX320F128L include a 16-channel 10-bit Analog-to-Digital Converter (ADC) for mixed-signal acquisition, four DMA channels that offload CPU cycles during peripheral data transfers, and a rich set of serial interfaces: multiple UART/EUSART, I2C, and SPI ports. The device also provides five 16-bit timers/counters, configurable I/O, and a USB 2.0 full-speed On-The-Go peripheral on select die revisions, enabling direct USB device/host bridging without an external PHY. Architecturally, the PIC32MX320F128L uses a Harvard-style 32-bit MIPS core with separate instruction and data buses feeding Flash and SRAM, providing deterministic interrupt latency and predictable execution. A peripheral bus matrix multiplexes ADC, I/O, and serial blocks, while a bus master DMA engine can move data between peripherals and RAM independently of the CPU. The 121-ball TFBGA exposes the full pinout, including extended I/O and parallel bus options that the smaller 64/100-pin variants omit. Typical applications include USB peripherals such as HID-class input devices and CDC serial bridges, industrial sensor hubs that aggregate multiple analog and digital channels via DMA, graphical user interfaces with parallel bus displays, and embedded connectivity nodes combining UART, SPI, and I2C peripherals. The wide combination of FFT-friendly MIPS performance and abundant peripherals makes it a fit for low-cost audio processing, motor-control feedback loops, and protocol bridges. When laying out a board, allocate a 10x10 mm BGA land pattern with 0.8 mm pitch fan-out and route differential USB DP/DM pairs with 90 ohm impedance matching. Decouple each VDD/AVDD pin with a 100 nF ceramic capacitor placed within 2 mm of the ball, and add a 4.7 uF bulk capacitor near the regulator output. The 'I' suffix denotes industrial temperature range, while the trailing 'BG' designates the 121-ball TFBGA package, distinguishing it from pin-compatible QFP variants in the same die family. This page synthesizes distributor pricing, drop-in same-package alternatives, and application guidance that goes beyond the manufacturer datasheet, equipping engineers with selection and sourcing context not always visible on standard distributor pages.

USD $4,25 En stock

PIC32MX320F128L-80V/BG

PIC32MX320F128L-80V/BG - 80MHz 32-bit MCU 128KB Flash 121-TFBGA | Microchip

The Microchip Technology PIC32MX320F128L-80V/BG is a 32-bit MIPS M4K core microcontroller operating at 80 MHz, integrating 128 KB of Flash program memory and 16 KB of SRAM, housed in a 121-ball TFBGA (10x10 mm) package with USB 2.0 full-speed OTG, two EUSART, two I2C, two SPI, a 16-channel 10-bit ADC, five 16-bit timers and a DMA controller. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, volatile and non-volatile memory, and programmable peripherals around a high-throughput data path. The PIC32 family uses the MIPS32 M4K instruction set and is positioned above Microchip's 8-bit PIC and 16-bit dsPIC lines, typically appearing in graphical HMI, USB device, and industrial control subsystems where 32-bit arithmetic and large code footprints are required. Key features of this part include 128 KB single-cycle Flash, 16 KB SRAM with pre-fetch buffer to accelerate sequential execution, a 10-bit 1 Msps ADC with 16 analog inputs, five 16-bit timers/counters, two comparators, two I2C and two SPI buses, two EUSART modules with IrDA support, and a parallel master port for external bus expansion. The device operates from 2.3 V to 3.6 V and is rated -40 C to +105 C for industrial environments. The PIC32MX320 architecture uses a 5-stage pipeline M4K core with hardware multiply/divide and a single-cycle Flash prefetch module that lets the CPU execute from Flash with near-RAM throughput. Peripheral DMA moves ADC, UART and SPI traffic independently of the core, freeing MIPS for application code and improving real-time determinism in control loops. Typical applications include USB peripherals and HID devices, industrial HMI panels, motor control front-ends, data loggers, and consumer audio/video accessories that need a USB-OTG-capable 32-bit controller with low BOM cost. The 121-ball TFBGA package targets space-constrained designs where board area is at a premium but routing density is high. When designing with this part, allocate decoupling caps near every VDD/VSS pin pair and follow the recommended 80 MHz crystal or external clock layout guidelines; the parallel master port pins are multiplexed with I/O and must be tri-stated in software when used as general-purpose I/O to avoid contention. Engineers should also verify that supply ramp meets the 0.1 ms minimum spec to avoid POR issues. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4,85 En stock

PIC32MX320F128L-80V/PT

PIC32MX320F128L-80V/PT - 80MHz 128KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX320F128L-80V/PT is a 32-bit MIPS32 M4K microcontroller operating at 80 MHz with 128 KB of Flash program memory and 16 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates a 10-bit ADC, USB 2.0 Full-Speed peripheral, DMA controller, and a rich set of communication peripherals (UART, SPI, I2C) in a low-power general-purpose architecture designed for embedded control and connectivity. A 32-bit microcontroller (MCU) is an integrated circuit containing a 32-bit processor core, program memory (typically Flash), data memory (SRAM), and on-chip peripherals such as analog-to-digital converters, timers, and communication interfaces. Within the embedded hierarchy it sits below microprocessors and above 8/16-bit MCUs, trading modest power for substantially higher throughput and larger addressable memory. The PIC32MX family specifically brings MIPS32 M4K RISC performance to microcontroller footprints familiar to PIC developers. Key features of the 80V/PT variant include the industrial-extended operating temperature grade (-40C to +105C), 80 MHz maximum core clock, 128 KB Flash (128K x 8), 16 KB SRAM, and 100-TQFP industrial-standard surface-mount package. The device supports 5-channel DMA, 16-channel 10-bit ADC at 1 Msps, USB Full-Speed Device/Host/OTG, two I2C, two SPI, two UART, five 16-bit timers, and up to 85 digital I/O pins. An integrated 8 MHz internal oscillator and PLL simplify external BOM. Architecturally the PIC32MX320 implements the MIPS32 M4K core with 5-stage pipeline, single-cycle hardware multiply, and zero-cycle hardware divide. The bus matrix connects CPU, DMA, and peripherals via separate Flash and RAM channels, allowing concurrent DMA transfers without stalling the core. The 10-bit ADC includes dual Sample-and-Hold and selectable scan sequences for multi-channel sensor reads. Typical applications include USB peripherals, industrial control panels, sensor data acquisition systems, HMI terminals, low-cost graphics controllers, and consumer electronics. The combination of USB, ADC, DMA, and ample RAM makes it suitable for tethered embedded devices where host PC communication is required. Industrial design efficiency drops in favorably when migrating from PIC24 to PIC32 for higher throughput. When designing, ensure decoupling caps are placed close to VDD/AVDD pairs (typically 100 nF plus 10 uF bulk), follow Microchip's trace-length guidelines for the USB DP/DM differential pair (90 ohm differential), and reserve the PGECx/PGEDx pins for ICSP. The 'V' temperature grade extends to +105C suitable for harsher industrial enclosures, while the 'I' variant is limited to +85C. This page synthesizes distributor pricing, drop-in package-compatible PIC32MX alternatives, USB design references, and engineering guidance not consolidated in the manufacturer datasheet alone.

USD $4,45 En stock

PIC32MX320F128LT-80I/PT

PIC32MX320F128LT-80I/PT - 80MHz 32-bit MCU 128KB Flash | Microchip

The Microchip PIC32MX320F128LT-80I/PT is a 32-bit MIPS32 M4K microcontroller operating at 80 MHz, integrating 128 KB of Flash program memory and 32 KB of SRAM in a 100-pin TQFP (12x12 mm) package. The "L" suffix denotes 100-pin variants, while the "T" indicates Tape and Reel packaging, and "I" marks the industrial temperature grade (-40C to +85C). It belongs to the PIC32MX3XX/4XX family and combines high-performance 32-bit computing with rich peripheral integration. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The PIC32MX320 family occupies the entry point of Microchip's 32-bit MIPS-based portfolio, sitting architecturally between 8-bit PIC16/PIC18 MCUs and higher-end Cortex-M devices. The MIPS32 M4K core delivers 1.56 DMIPS/MHz performance with single-cycle multiplication and hardware multiply-accumulate support, enabling deterministic real-time control. Key features include 128 KB Flash, 32 KB SRAM, up to 85 general-purpose I/O pins, five 16-bit timers/counters, two I2C and two SPI modules, two UART modules with IrDA support, a parallel master port (PMP), a 16-channel 10-bit ADC at up to 500 ksps, and a real-time clock/calendar with calendar mode. The ICSP debug interface is supported via PGECx/PGEDx pins, enabling in-circuit programming and debugging with MPLAB tools. The PIC32MX320F128LT-80I/PT operates from 2.3V to 3.6V and includes a 5V tolerant digital I/O structure. Internal DMA eliminates CPU overhead for data movement, while hardware CRC and PMP accelerate memory-mapped peripheral interfacing. The 100-pin TQFP package exposes nearly the full peripheral set simultaneously, ideal for graphics, USB-device (via on-chip transceiver-less interface), or industrial control hubs. Typical applications include industrial automation controllers, HVAC control boards, point-of-sale terminals, medical instrumentation, multi-axis motor control pre-processors, low-power HMI displays, and consumer appliances requiring 32-bit performance with 8-bit-style simplicity. The PMP makes it a cost-effective graphics controller for STN/TFT displays in HMI panels. When designing with this part, allocate decoupling capacitance (100 nF + 10 uF bulk) near each VDD/VDD/VSS pin pair and follow Microchip's recommended analog/digital ground split for ADC accuracy. The 80 MHz operation typically demands a 4-layer PCB for signal integrity on the external memory bus, if used. This page synthesizes distributor pricing, drop-in PIC32MX3XX/4XX family alternatives, and design notes that complement the Microchip datasheet without repeating it verbatim.

USD $4,78 En stock

PIC32MX320F128LT-80V/PT

PIC32MX320F128LT-80V/PT - 32-bit MCU 128KB Flash 80MHz TQFP-100 | Microchip

The Microchip Technology PIC32MX320F128LT-80V/PT is a 32-bit MIPS32 M4K microcontroller featuring 128KB of Flash, 16KB of SRAM, and a maximum CPU speed of 80MHz, housed in a 100-pin TQFP package (12x12 mm). It is part of the PIC32MX3XX/4XX family, the lowest-cost entry into the 32-bit PIC microcontroller line, designed for applications that need more performance than 8-bit or 16-bit MCUs without the overhead of higher-end ARM parts. A PIC32MX microcontroller is a 32-bit MCU based on the MIPS32 M4K core from Microchip Technology, combining deterministic real-time response with the rich peripheral set expected of modern embedded designs. It belongs to the larger PIC32 family -> 32-bit microcontroller -> MCU -> embedded processor hierarchy, and sits below higher-tier PIC32MZ and PIC32MK devices in Microchip's portfolio. The 'V' suffix denotes an extended industrial temperature grade of -40C to +105C for harsh-environment use. Key features of the PIC32MX320F128LT-80V/PT include 128KB Flash organized as 128K x 8, 16KB SRAM, a 10-bit ADC with up to 16 channels, a 16-bit Parallel Master Port (PMP) for external memory or graphics interfaces, USB 2.0 full-speed On-The-Go (OTG), two I2C and two UART/I2S peripherals, two SPI ports, five 16-bit timers/counters, and a 16-channel DMA controller for CPU offload. The MIPS32 M4K core executes most instructions in one cycle and includes a hardware multiply/divide unit for DSP-class operations. Architecturally the device pairs the MIPS core with Microchip's standard peripheral set, executes code from internal Flash with optional prefetch cache, and supports trace via the standard MIPS trace interface. The integrated 10-bit ADC with up to 500 ksps throughput is adequate for sensor reading and basic instrumentation, while the 5V-tolerant I/O on most pins simplifies connection to legacy 5V logic. Typical applications include industrial automation controllers, USB device and embedded host products, graphical user interfaces with PMP-driven TFT displays, consumer appliances, motor control interfaces, and low-cost Ethernet or Wi-Fi gateway nodes. The 100-pin TQFP package offers ample I/O (up to 85 GPIO) for parallel buses, making it a popular choice for legacy peripheral migration from PIC24/PIC18 designs. When designing with this part, ensure the 2.5V/3.3V core supply is decoupled with at least 100 nF + 1 uF close to VDD pins. Take care to configure unused pins as outputs to minimize current draw, and respect the maximum operating temperature of +105C for the 'V' grade. For designs migrating from PIC24/PIC18, the standard MPLAB X IDE and Harmony frameworks provide drop-in peripheral libraries. This page synthesizes distributor pricing as of 2026-10-02, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet - providing information gain beyond what is available on DigiKey, Mouser, or the Microchip product page alone.

USD $4,75 En stock

PIC32MX330F064H-I/MR

PIC32MX330F064H-I/MR - 100MHz 32-bit MIPS MCU, 64KB Flash | Microchip

The Microchip Technology PIC32MX330F064H-I/MR is a 32-bit MIPS32 M4K RISC microcontroller running up to 100 MHz (50 MHz in this -I speed grade) with 64 KB Flash and 16 KB SRAM, packaged in a 64-pin 9x9 mm VQFN with exposed thermal pad. It targets cost-sensitive embedded applications that need USB-OTG, audio/I2S, and analog peripherals in a small footprint. The PIC32MX3/4 family integrates two I2S channels, USB-OTG, a 10-bit 1 Msps ADC, and a charge time measurement unit (CTMU) for capacitive touch sensing. What is a PIC32MX microcontroller? The PIC32MX family is Microchip's MIPS32-based 32-bit MCU line, bridging the 8-bit PIC16/PIC18 world and the higher-end Cortex-M platforms. These 32-bit microcontrollers sit in the power-management and signal-processing tier, sitting above 8-bit microcontrollers and below Cortex-M4 MPUs, within each category in the broader semiconductor hierarchy. Designers choose PIC32MX for deterministic interrupt latency, mature MPLAB Harmony support, and rich connectivity including I2C, SPI, UART, PMP, IrDA, and LIN. Key features of this part include 64 KB Flash program memory, 16 KB SRAM, 53 digital I/O lines, 5 16-bit timers/counters, two I2S/SPI channels, USB-OTG full-speed, a 10-bit 1 Msps ADC with up to 28 analog inputs, and a CTMU for capacitive touch. The 64-VQFN (9x9) package exposes a thermal pad, lowering theta-JA to roughly 22 C/W on a 4-layer JEDEC PCB. Operating voltage is 2.3 V to 3.6 V and the temperature grade is -40 C to +85 C industrial. Architecturally, the device uses the MIPS32 M4K core with single-cycle hardware multiply and divide, a 5-stage pipeline, and tightly coupled peripherals through a peripheral bus matrix. The 16 KB of data RAM is split into two banks to feed the 8-channel DMA engine, which off-loads SPI, I2S, UART, and ADC transfers. The USB-OTG controller is integrated on-chip with internal transceiver, requiring only external ESD protection and the 5 V VBUS supply path. Typical applications include USB audio peripherals, low-cost HMI touch panels, motor control signal conditioning, industrial sensor nodes, and consumer appliances that need USB device functionality. Designers also use this part in dataloggers, USB-to-UART bridges, and battery-powered instrumentation thanks to multiple low-power sleep modes down to sub-mA standby. When designing with this MCU, ensure the exposed pad (EP) is soldered to a sufficiently large copper pour (at least 1 sq inch) for thermal relief. Decouple VDD with 0.1 uF ceramic plus 4.7 uF bulk within 5 mm of the pins, and isolate the analog AVDD with a ferrite bead plus 10 nF + 1 uF capacitor network to keep ADC noise below 1 LSB. This page synthesizes distributor pricing, parametric drop-in alternatives from the same PIC32MX330/340 family, and practical PCB layout guidance that goes beyond the manufacturer datasheet.

USD $4,10 En stock

PIC32MX330F064H-V/MR

PIC32MX330F064H-V/MR - 80MHz 64KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX330F064H-V/MR is a 32-bit MIPS32 M4K microcontroller running at 80 MHz (100 DMIPS), with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals on one die. Within the power-management hierarchy of embedded systems, the MCU sits at the top of the control chain, orchestrating sensors, actuators, and communication interfaces. The PIC32MX3/4 family is Microchip's entry point into 32-bit PIC performance, occupying the tier above 8-bit PIC16/PIC18 and 16-bit PIC24 devices, and below the high-performance PIC32MZ. Key features of the PIC32MX330F064H-V/MR include USB OTG (On-The-Go) full-speed host/device support, a Charge Time Measurement Unit (CTMU) for capacitive touch, DMA controller, I2S audio interface, and two SPI/I2S modules. Operating voltage spans 2.3V to 3.6V (2.5V/3.3V nominal), and the -V temperature grade covers -40C to +125C. Critically, this suffix is AEC-Q100 qualified, making it suitable for automotive and harsh-environment industrial designs. Architecturally, the MIPS32 M4K core uses a 5-stage pipeline with a 32-bit instruction set executed from zero-wait-state Flash at full 80 MHz speed. The peripheral bus and prefetch buffering sustain high code throughput, while DMA offloads data movement for USB and audio streams, reducing CPU load in real-time applications. Typical applications include automotive body and comfort modules, USB-connected industrial instruments, capacitive-touch human-machine interfaces, and audio accessories leveraging I2S. The 64-QFN footprint with exposed pad provides good thermal and electrical grounding for space-constrained boards. Design-wise, budget the 9x9 mm QFN land pattern with adequate via stitching under the exposed pad, and verify USB impedance control (90-ohm differential) on D+/D-. Consider Flash self-programming endurance when planning field updates. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4,15 En stock

PIC32MX330F064H-V/PT

PIC32MX330F064H-V/PT - 80MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX330F064H-V/PT is a 32-bit RISC microcontroller built on the MIPS32 M4K core, offering 80 MHz CPU clock, 64 KB of Flash program memory, and 16 KB of SRAM in a 64-pin TQFP (PT) package. It belongs to the PIC32MX3/4 series targeting low-cost 32-bit performance with rich integrated peripherals. A 32-bit microcontroller (MCU) is an integrated processor that combines a CPU core, program memory, data memory, and a programmable peripheral set on a single die. The PIC32MX family specifically uses the MIPS32 M4K architecture, which executes most instructions in one cycle and supports up to 150 DMIPS at peak. Within the broader taxonomy, the PIC32MX sits as a mid-range 32-bit MCU -> embedded controller -> semiconductor, offering higher performance than 8/16-bit AVR/PIC16/PIC18 devices and comparable capability to ARM Cortex-M0/M0+ parts. Key features of the PIC32MX330F064H-V/PT include two SPI/I2S interfaces, up to five 16-bit PWM channels, four DMA channels, a 10-bit ADC with up to 28 channels, a CTMU (Charge Time Measurement Unit) for touch sensing, and an integrated USB 2.0 full-speed device/host/OTG controller. The device operates from 2.5V to 3.6V with 5V-tolerant I/O on selected pins. The 80 MHz version delivers 100 DMIPS and is the lower-speed sibling of the 120 MHz PIC32MX340/350/360/370 variants. The architecture combines a 5-stage pipeline M4K core with multi-vector interrupt controller and prefetch cache, enabling deterministic real-time response. The peripheral set is mapped via a separate peripheral bus to gain DMA access without latency, which is essential for USB isochronous transfers and high-speed ADC sampling. Typical applications include industrial control HMI panels, USB audio Class 1 devices, low-cost graphics/touch appliances, sensor hubs, and home appliances requiring USB connectivity plus a rich analog front end. The CTMU enables capacitive touch buttons and sliders without an external touch controller. When designing with this MCU, allocate careful attention to the USB bus: the device includes an internal USB transceiver but requires an external 48 MHz crystal for full-speed USB operation, and PCB layout must keep the D+/D- traces impedance-controlled and short to pass USB compliance. The -V temperature grade covers -40C to +105C operation for industrial environments. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MX family, and practical design notes not consolidated on any individual distributor page.

USD $2,85 En stock

PIC32MX330F064H-V/RG

PIC32MX330F064H-V/RG - 32-bit MCU 80MHz 64KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MX330F064H-V/RG is a 32-bit MIPS32 M4K PIC microcontroller IC operating at 80MHz, integrating 64KB Flash program memory and 16KB SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It targets AEC-Q100 automotive-grade applications with 2.5V/3.3V operating voltage. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (RAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX3/4 family sits within the broader taxonomy of microcontrollers -> embedded processors -> semiconductors, and is widely adopted for cost-sensitive embedded designs requiring 32-bit performance without the overhead of higher-end Cortex-M parts. Key features include 80 MHz / 100 DMIPS core performance, 64KB program memory with 16KB RAM, an integrated 10-bit ADC, two SPI/I2S ports, two I2C, two UART, USB 2.0 full-speed OTG, five 16-bit timers, a parallel master port, and 53 digital I/O pins. The MIPS32 core delivers deterministic real-time response in industrial control and automotive HMI applications. The device uses a 5-stage pipeline Harvard architecture with single-cycle multiplication, enabling efficient DSP-like operations. The integrated USB 2.0 full-speed OTG controller eliminates the need for an external USB transceiver, while the 10-bit 1 Msps ADC with up to 28 analog input channels supports precision sensor acquisition. Typical applications include automotive instrument clusters and infotainment HMI, industrial automation controllers, USB peripherals, sensor hub systems, consumer audio with processing amplifier footers, and low-power IoT connected edge devices. The wide peripheral integration is leveraged when wiring sensor and IO communication paths down to MCU nodes. When designing with this device, observe the 2.5V/3.3V supply window and the VQFN-64 thermal pad PCB mounting requirements. The -V suffix denotes an automotive-grade (-40C to +125C) operating range, and the part is supplied in tube packaging as indicated by the /RG suffix. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate PIC32MX330F064H-V/RG for new designs and second-source qualification.

USD $3,65 En stock

PIC32MX330F064HT-I/RG

PIC32MX330F064HT-I/RG - 100MHz 32-bit MCU 64-VQFN | Microchip

The Microchip Technology PIC32MX330F064HT-I/RG is a 32-bit MIPS32 M4K PIC microcontroller operating at up to 100 MHz, integrating 64 KB (77824 bytes) of Flash program memory and 16 KB (16384 bytes) of SRAM data memory in a 64-pin 9x9 mm VQFN (RG) package. According to the Microchip PIC32MX330/340 family datasheet, the device delivers up to 150 DMIPS while supporting USB 2.0 full-speed device/host/OTG, two I2S/SPIs, multiple UARTs, I2C, 10-bit ADC, analog comparators and a CTMU, making it a well-defined drop-in member of the PIC32MX3/4 series.

USD $3,65 En stock

PIC32MX330F064HT-V/MR

PIC32MX330F064HT-V/MR - 32-bit MCU 80MHz 64KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX330F064HT-V/MR is a 32-bit MIPS32 M4K-based microcontroller delivering 80 MHz CPU clock with 64 KB Flash and 16 KB SRAM in a 64-pin VQFN (MR) package with automotive-grade -V temperature rating. What is a PIC32MX microcontroller? The PIC32MX family from Microchip combines the legacy PIC ecosystem with a 32-bit MIPS core, occupying the middle ground between 8/16-bit PIC MCUs and high-performance Cortex-M parts. PIC32MX devices integrate rich peripherals (USB-OTG, I2S, CTMU, DMA, PMP) into a low-cost single-core package and run at 50–120 MHz with up to 150 DMIPS, making them suitable for USB connectivity, audio processing, and low-power edge applications. Key features of the PIC32MX330F064HT-V/MR include 64 KB on-chip Flash with 12 KB auxiliary boot Flash, 16 KB SRAM, hardware USB 2.0 full-speed OTG, dual SPI/I2S ports, dual I2C, four UART, a 10-bit 1 Msps ADC with up to 28 channels, CTMU for capacitive touch, DMA controller, peripheral pin select, and an internal 8 MHz RC oscillator with PLL. The 64-pin VQFN package has a 0.5 mm pitch and an exposed thermal pad. The architecture is based on the MIPS32 M4K Harvard core with hardware multiply/divide and a 5-stage pipeline, providing deterministic interrupt response. Memory is mapped as 64 KB Flash plus 12 KB boot Flash for safe firmware updates, with 16 KB SRAM supporting standard C library builds. The integrated USB-OTG controller enables device, host, or OTG operation without an external PHY. Typical applications for the PIC32MX330F064HT-V/MR include automotive infotainment control, industrial HMI with capacitive touch, USB device/hid peripherals, low-cost audio playback over I2S, and small graphical displays using the PMP interface. The -V temperature grade extends operation to -40 °C to +105 °C, meeting AEC-Q100 Grade 2 expectations for automotive cabin modules. When designing with this part, ensure the exposed thermal pad of the VQFN is soldered to a properly sized ground copper pour; missing this pad increases thermal resistance and degrades ADC accuracy. Decouple VDD/VUSB with 100 nF plus 4.7 µF ceramics placed within 3 mm of the supply pins, and configure the PLL only after the primary oscillator has stabilized. This page synthesizes distributor pricing, AEC-Q100 alternative variants, and practical USB+CTMU design notes that go beyond the bare PIC32MX3XX/4XX family datasheet.

USD $4,12 En stock

PIC32MX330F064HT-V/RG

PIC32MX330F064HT-V/RG - 80MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX330F064HT-V/RG is a 32-bit MIPS32 M4K microcontroller with 64KB Flash and 16KB RAM, operating up to 80MHz (Mouser: 100MHz rating on some families) in a 64-pin VQFN EP (RG) 9x9 mm package rated -40C to +105C (V grade). A 32-bit microcontroller (MCU) is a single-chip processor with on-chip Flash program memory, SRAM data memory, and integrated peripherals such as timers, UARTs, SPIs, I2C, ADC, and PWM. The PIC32MX3/4 family occupies the performance mid-tier of the Microchip PIC32 line: ARM Cortex-M-class alternatives such as STM32F1 or NXP LPC1768 typically use Harvard M-architecture for similar DMIPS/$M. The PIC32MX M4K core delivers up to 150 DMIPS at 120MHz and uses a five-stage pipeline with hardware multiply/divide, supporting 32-bit MIPS instructions. Key features of the PIC32MX330F064HT include: 64KB Flash program memory, 16KB SRAM, two SPI/I2S, two I2C, two UART, USB 2.0 full-speed OTG, 10-bit ADC with up to 16 channels, five 16-bit timers/counters, and parallel master port (PMP). The 64-pin VQFN (RG) package with exposed pad provides a thermal resistance suitable for industrial -40C to +105C operation. The 'H' suffix denotes 64KB Flash with USB; the 'T' suffix denotes Tape and Reel. Architecture depth: PIC32MX uses a 5-stage pipeline, single-cycle multiply, hardware divide, and bit-banding for atomic bit manipulation. The M4K core supports MIPS16e code compression, reducing Flash footprint by ~30%. USB OTG enables host or device mode with integrated PHY; PMP can interface to external parallel buses, graphics LCDs, or FPGA. Typical applications include industrial control (USB HMI, sensor hubs), low-cost audio devices (USB speakers, MIDI), home automation (HA-BUS bridges, smart thermostats), USB peripherals (barcode scanners, custom HID), and more. The wide operating range and rich peripherals suit automotive aftermarket and harsh-environment designs. Design consideration: route the exposed pad (EP) to a solid ground copper pour with at least 8 thermal vias for heat dissipation. Decouple VDD/VUSB with 100nF ceramic as close to the IC pins as possible; for USB use a 10uF bulk plus ESD array (such as USBLC6-2SC6A). This page synthesizes distributor pricing (as of 2026-10-02), drop-in alternatives within the same 64-pin VQFN footprint, and practical design notes not found in the manufacturer datasheet alone.

USD $3,05 En stock

PIC32MX330F064L-I/PF

PIC32MX330F064L-I/PF - 64KB Flash 80MHz MIPS MCU | Microchip

The Microchip Technology PIC32MX330F064L-I/PF is a 32-bit MIPS microcontroller based on the MIPS32 M4K core, delivering up to 80 MHz core clock speed with 64 KB Flash and 16 KB SRAM, housed in a 100-pin TQFP (14x14 mm) surface-mount package with 0.5 mm pitch. It integrates rich peripherals including two SPI/I2S, two UART, two I2C, USB-OTG (full-speed), a 10-bit ADC with up to 16 channels, analog comparators, and capture/compare/PWM modules. The PIC32MX330 family targets cost-sensitive 32-bit applications that exceed PIC16/PIC24 performance envelopes while remaining pin-compatible with Microchip's 16-bit MCU portfolio. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), working RAM, and programmable I/O peripherals on one silicon die. MCUs sit within the broader semiconductor hierarchy as a sub-category of microprocessors, which sit inside the larger domain of embedded computing. 32-bit MCUs like the PIC32MX3/4 family bridge the gap between 8/16-bit microcontrollers and full microprocessors by offering higher throughput, larger addressable memory, and richer peripherals while retaining deterministic real-time behavior. This taxonomy matters for selection: 32-bit MIPS cores outperform 8-bit PIC16 devices on DSP and protocol-handling tasks but consume more power than simple 8-bit parts. Key features of the PIC32MX330F064L include 64 KB Flash with 12 KB additional boot Flash, 16 KB SRAM, 5 V tolerant digital I/O (when configured), 16-channel 10-bit ADC at 1 Msps, two comparators, five 16-bit timers, two UART/I2S channels, two SPI, two I2C, USB-OTG full-speed on-chip transceiver, and parallel master port. The device runs from 2.3 V to 3.6 V and supports an industrial -40 °C to +85 °C temperature range, marked by the -I suffix. Programmable pull-ups, open-drain outputs, and peripheral pin select simplify PCB routing. The PIC32MX330 architecture combines Harvard-style instruction and data buses with a 5-stage pipeline, achieving 1.56 DMIPS/MHz while retaining MIPS16e compressed instruction mode for code density. The on-chip USB-OTG transceiver eliminates external PHY chips and provides both host and device capability, while the dedicated peripheral bus keeps interrupt latency deterministic. Performance for control loops is enhanced by the 5-output compare unit and the 16-bit 5-input capture unit, both of which can run without CPU intervention. Typical applications include industrial control, USB peripherals such as custom HID devices and CDC bridges, low-cost graphics and audio (USB speaker) products, sensor hubs with USB bridging, and home appliances requiring 32-bit performance with USB connectivity. The TQFP-100 footprint is commonly used for human-machine interface boards and multi-protocol gateways. When selecting it, ensure that USB DP/DM trace impedance is 90 ohms differential and that the on-chip voltage regulator has adequate bulk capacitance to avoid core-voltage droop during USB bus-powered operations. This page synthesizes distributor stock, drop-in alternatives, and design notes not assembled in any single vendor resource.

USD $3,95 En stock

PIC32MX330F064L-I/PT

PIC32MX330F064L-I/PT - 80MHz, 64KB Flash MCU | Microchip 100-TQFP

The Microchip Technology PIC32MX330F064L-I/PT is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering 80 MHz core clock performance and 64 KB of Flash program memory plus 16 KB of SRAM in a 100-pin TQFP package (12x12 mm). According to the manufacturer datasheet, the device integrates USB-OTG, two I2S/SPI modules, a Parallel Master Port (PMP), a Charge Time Measurement Unit (CTMU), and Peripheral Pin Select (PPS) for flexible signal routing, making it a strong fit for human-machine interface, audio, and USB-connected embedded designs. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. PIC32MX devices occupy the mid-range of the PIC32 family, sitting between low-cost PIC32MX1/2/3/4/5/6/7 entry-level devices and higher-end PIC32MZ parts. They are widely used as upgrade paths from 16-bit PIC24/dsPIC designs because they share peripheral libraries and pin-compatibility with many 16-bit DIP/PT packages, allowing migration without PCB rework. Key features of the PIC32MX330F064L include 10-bit ADC with up to 1 Msps conversion rate, multiple UART/SPI/I2C interfaces, and MIPS16e code compression for up to 40% smaller code size. The device operates from 2.3 V to 3.6 V across the industrial -40C to +105C temperature range, supports low-power Idle and Sleep modes, and offers a 5-channel DMA controller for offloading CPU data movement. The 100-TQFP package provides generous I/O count for applications needing parallel buses, multiple serial interfaces, and USB connectivity simultaneously. Typical applications include industrial control panels, USB audio devices, motor control front-ends, barcode scanners, point-of-sale terminals, and graphical display controllers. The CTMU enables touch sensing and capacitive measurement, while the PMP simplifies interfacing to graphical LCDs and external parallel peripherals such as FIFO memories and ASICs. Engineers migrating from PIC24FJ/PIC24H designs often select this part for its familiar development ecosystem (MPLAB X IDE, XC32 compiler, Harmony framework). When designing with this part, place decoupling capacitors (100 nF + 10 uF bulk) as close as possible to every VDD/VSS pair, route the 48 MHz crystal traces symmetrically with ground guard rings, and verify USB-OTG board impedance (90 ohm differential) against the USB 2.0 specification. The PPS feature must be configured early in firmware to remap peripheral functions to physical pins, otherwise code will run but peripherals will be inactive. This page synthesizes distributor pricing, same-brand drop-in alternatives drawn from the PIC32MX3/4/5/6/7 family, and practical design notes not found in the standalone datasheet, helping procurement and firmware engineers evaluate this part efficiently.

USD $4,62 En stock

PIC32MX330F064L-I/TL

PIC32MX330F064L-I/TL - 80MHz 32-bit MCU 64KB Flash USB | Microchip

The Microchip Technology PIC32MX330F064L-I/TL is a 32-bit MIPS32 M4K microcontroller delivering up to 80 MHz / 105 DMIPS performance with 64 KB Flash and 16 KB SRAM, housed in a 124-pin VTLA surface-mount package. It integrates two I2S/SPI modules for audio codec interfacing, USB 2.0 full-speed On-The-Go (OTG), a Parallel Master Port (PMP) for graphics, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, RAM, and a rich set of peripherals. Within the broader taxonomy, a 32-bit MCU sits above 8-bit/16-bit MCUs and below microprocessors, balancing deterministic real-time control with the headroom to run graphical user interfaces, USB stacks, and audio processing pipelines. The PIC32MX3/4 family targets cost-sensitive embedded designs that need USB connectivity and Human-Machine Interface (HMI) peripherals without paying for higher-end Cortex-M parts. Key specifications include 64 KB Flash with 12 KB auxiliary boot Flash, 16 KB SRAM, 2.3V to 3.6V single-supply operation, 5V-tolerant I/O, Peripheral Pin Select (PPS) remappable digital functions, JTAG debug, and an industrial -40C to +85C operating range. The MIPS M4K core includes hardware Multiply/Divide and a single-cycle 32-bit ALU, enabling fast DSP-style math loops in motor control and audio equalization. Typical applications are USB audio peripherals (headsets, speakers, MIDI controllers), low-cost graphics terminals using PMP-driven TFT panels, capacitive touch user interfaces (kitchen appliances, white goods), and industrial sensor hubs that need USB-OTG host/device toggling. The integrated CTMU replaces external touch controller ICs in many designs, while the two I2S modules support stereo codec streaming without an external audio bridge. For new designs, the -120 speed grade variant (PIC32MX330F064L-120I/TL) raises the core clock to 120 MHz for 150 DMIPS when extra processing headroom is needed. Engineers migrating from older PIC32MX1/2 families gain USB-OTG, more PWM timers, and the richer PPS routing matrix at the same VTLA-124 footprint.

USD $3,96 En stock

Subcategorías

Productos (32725)