Circuitos integrados

PIC32MZ0512EFE100-I/GJX

PIC32MZ0512EFE100-I/GJX - 200MHz 32-bit FPU MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE100-I/GJX is a 32-bit microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, integrating a MIPS Warrior M-class core running at 200 MHz (330 DMIPS), 512 KB of Flash with dual-panel live-update support, and 128 KB of SRAM in a 100-pin TFBGA (7x7x1.06 mm) package. The industrial-grade -I variant operates across -40 °C to +85 °C and supports a 2.0 V to 3.6 V supply range, making it suitable for industrial, IoT, and graphics/HMI applications. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, program and data memory, and a rich set of on-chip peripherals. PIC32MZ EF devices occupy the high-performance tier of Microchip's PIC32 portfolio and add a single-precision IEEE-754 FPU and a DSP-enhanced core with four 64-bit accumulators plus single-cycle MAC, saturating and fractional math, supporting signal-processing workloads that benefit from hardware-accelerated arithmetic. The PIC32MZ family sits in the broader taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 -> PIC32MZ EF. Key features include a 200 MHz / 330 DMIPS MIPS Warrior M-class core, IEEE 754-compliant FPU, dual-panel Flash for live firmware update, an integrated crypto engine on F-variant devices (this E variant has No Crypto), and a connectivity peripheral set that includes HS USB, Ethernet MAC, CAN, and multiple I2S/SPI/I2C interfaces for audio and graphics pipelines. On-board 12-bit ADC at up to 18 Msps and analog comparators provide advanced analog capability, while the Graphics Peripheral Interface enables direct connection to TFT displays for HMI applications. The architecture combines a 5-stage pipeline with tightly-coupled SRAM, instruction and data caches, and a dedicated bus matrix so the CPU can sustain 330 DMIPS while peripherals stream data through DMA. Dual-panel Flash allows one bank to run while the other is reprogrammed, enabling fail-safe firmware-over-the-air (FOTA) updates without downtime - a critical capability for connected industrial nodes. Typical applications include industrial IoT gateways with Ethernet, HMI panels with TFT display driving, automotive infotainment sub-systems (non-safety-rated), high-end audio devices, motor control, and graphics-rich consumer appliances. The 100-pin TFBGA footprint suits compact board layouts where space is at a premium. When designing with this device, use the MPLAB Harmony v3 framework for peripheral configuration and middleware, and confirm that the chosen 100-pin TFBGA layout has adequate thermal copper for sustained CPU activity. Provide a clean, low-noise 3.3 V rail; the FPU and DSP engine are sensitive to supply ripple at high clock rates. This page synthesizes distributor pricing, same-brand drop-in alternatives (different Flash / temperature grade), and practical design notes that are not assembled in the manufacturer datasheet itself.

USD $6,84 En stock

PIC32MZ0512EFE100-I/PF

PIC32MZ0512EFE100-I/PF - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE100-I/PF is a 32-bit MIPS Warrior M-class microcontroller running at 200 MHz (330 DMIPS) with 512 KB dual-panel Flash and 128 KB SRAM in a 100-pin TQFP (14x14 mm) package. It integrates an IEEE 754-compliant single-precision FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, Hi-Speed USB 2.0 device/host/OTG, 10/100 Ethernet MAC with RMII/MII, Quad-SPI (SQI) interface, and advanced analog including a 12-bit 2 MSPS ADC. The -I/PF suffix denotes the industrial-temperature (-40C to +85C) variant with PF = 100-pin TQFP. What is a PIC32 microcontroller? A PIC32 microcontroller is a 32-bit MIPS-based MCU family that delivers substantially higher performance than 8- and 16-bit MCUs while preserving Microchip's PIC ecosystem: peripheral compatibility, MPLAB X IDE, Harmony framework, and pin/peripheral compatibility across families. Within the MCU taxonomy, PIC32 sits under microcontroller -> embedded processor -> semiconductor. The PIC32MZ EF sub-family adds hardware floating-point and dedicated DSP extensions, occupying the high-performance tier of the PIC32 line. Key features include 200 MHz / 330 DMIPS core, 512 KB dual-panel Flash for live firmware updates without downtime, 128 KB SRAM, Hi-Speed USB 2.0 with on-chip transceiver, 10/100 Ethernet MAC, dedicated SQI for external serial flash, four UART, multiple SPI/I2C peripherals, and configurable I/O. The 100-pin TQFP footprint exposes extensive connectivity while keeping PCB design straightforward. The architecture uses a 5-stage pipeline MIPS Warrior M-class core with DSP extensions and an integrated single-precision IEEE 754 FPU. Dual-panel Flash allows the active firmware panel to update the inactive panel while execution continues, eliminating downtime during firmware upgrades - critical for industrial and IoT gateways. Typical applications include industrial IoT gateways with Ethernet, motor-control BLDC/PMSM drives, HMI/graphical displays, audio/graphics interfaces, USB device/host peripherals, and automotive connectivity clusters. The wide peripheral set makes it suitable as a system-on-MCU for connected embedded products. Design consideration: route the Ethernet RMII/MII traces with 50-ohm impedance, place the 25 MHz PHY clock within 5 mm of the ETH_REF_CLK pin, and keep USB DP/DM traces length-matched within 150 mil to preserve Hi-Speed USB signal integrity. This page synthesizes distributor pricing, drop-in PIC32MZ EF alternatives, and practical thermal/EMC design notes not collected into the manufacturer datasheet, giving the buyer a procurement and design reference unavailable from any single source.

USD $7,20 En stock

PIC32MZ0512EFE100-I/PT

PIC32MZ0512EFE100-I/PT - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFE100-I/PT is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family running at up to 200 MHz with 330 DMIPS core performance, 512 KB Flash and 128 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates a MIPS Warrior M-class core with IEEE 754-compliant FPU for 32/64-bit floating-point math, microMIPS mode for up to 35% smaller code size, and a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, saturating and fractional math. The device also exposes 16 KB I-cache and 4 KB D-cache, an MMU for embedded OS execution, and dual-panel Flash with live-update support. Background: A microcontroller (MCU) is a single-chip computer integrating a CPU core, memory (Flash/RAM), and peripherals. 32-bit MCUs based on ARM Cortex-M or MIPS architectures target mid-to-high-end embedded applications requiring more performance and memory than 8/16-bit parts. The PIC32MZ EF family sits in the high-performance tier, competing with Cortex-M4/M7 parts and adding an integrated FPU plus connectivity peripherals. Connectivity-focused MCUs like this one bridge the gap between traditional microcontrollers and microprocessors, supporting industrial Ethernet, USB, and graphics HMI workloads on a single die. Key features include a 12-bit 18 Msps ADC, multiple communication interfaces (HS USB, Ethernet, CAN, SPI, I2C, UART), and hardware crypto acceleration on the EFF variant (EFE = no crypto). It supports up to 2 MB of live-update Flash in the broader family and integrates audio/graphics interfaces for HMI applications. The Industrial (-I) operating range covers -40 °C to +85 °C, suitable for industrial and consumer environments. Architecture-wise, the MIPS Warrior M-class core delivers deterministic interrupt latency and tight C/Assembly code density when microMIPS mode is enabled. The dual-panel Flash partition enables in-field firmware updates without downtime, while the MMU permits running embedded operating systems such as FreeRTOS, OpenRTOS, or even Linux derivatives. Typical applications include industrial automation controllers, IoT gateways with Ethernet, automotive HMI, motor control (BLDC/PMSM), and graphics-based human-machine interfaces. The combination of HS USB, Ethernet MAC, and CAN makes it suitable for industrial connectivity nodes. Design consideration: at 200 MHz core clock, place a 1 µF + 100 nF decoupling pair within 2 mm of each VDD/VSS pair on the TQFP and route VSS traces directly to a continuous ground pour to control switching noise on the PLL supply. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7,45 En stock

PIC32MZ0512EFE100T-E/GJX

PIC32MZ0512EFE100T-E/GJX - 200MHz 32-bit MCU 512KB Flash TFBGA-100

The Microchip Technology PIC32MZ0512EFE100T-E/GJX is a 32-bit MIPS32 M-Class PIC microcontroller operating at up to 200 MHz, integrating 512 KB of Flash program memory and 128 KB of SRAM in a 100-pin TFBGA (7x7 mm) package. It is part of the PIC32MZ EF family aimed at connectivity, industrial, automotive, IoT, graphics (HMI) and motor-control applications. What is a PIC32 MCU? The PIC32MZ EF family belongs to the broader class of 32-bit microcontrollers (MCUs), which are programmable system-on-chip devices containing a processor core, Flash program memory, SRAM, and rich peripherals. Within that hierarchy, the PIC32MZ EF family sits as a high-performance MIPS32 M-Class variant of Microchip's PIC product line, targeting applications that demand up to 2 MB Flash, 512 KB SRAM, and up to 252 MHz core speed, while remaining compatible with the Microchip MPLAB X IDE and Harmony ecosystem. Key features of the PIC32MZ0512EFE100T-E/GJX include 78 user I/O pins, an integrated 200 MHz core with single-cycle MAC DSP engine, a 12-bit ADC, multiple UART/SPI/I2C/CAN peripherals (no crypto, no CAN per the base variant descriptor), and a 100-pin TFBGA package with 0.65 mm ball pitch that supports compact, high-density PCB designs. The part carries automotive-grade screening (the E temperature grade suffix means -40C to +125C operating range), making it suitable for AEC-Q100 customer programs. Architecturally, the PIC32MZ EF core combines a 5-stage MIPS32 pipeline with tightly-coupled prefetch buffers and a dedicated FPU option, which together with the 128 KB SRAM delivers deterministic interrupt latency and high throughput for graphics and motor-control loops. The part targets industrial HMI, connected appliances, and automotive body-domain nodes where MIPS-per-watt and a compact BGA footprint are critical. Typical applications include industrial HMI displays, IoT edge gateways, automotive infotainment sub-systems, motor-control inverters, and graphics-enabled consumer devices. The TFBGA-100 7x7 package suits space-constrained designs that still require 78 GPIOs and a rich peripheral mix. When designing with this part, ensure that the PCB land pattern matches the 0.65 mm pitch BGA and that the thermal pad is properly soldered for thermal dissipation. The E temperature grade suffix supports automotive under-hood and industrial environments without derating. This page consolidates distributor pricing, drop-in alternatives, and design notes from Microchip documentation not summarized on a typical catalog page.

USD $7,95 En stock

PIC32MZ0512EFE100T-I/GJX

PIC32MZ0512EFE100T-I/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE100T-I/GJX is a high-performance MIPS32 M-Class 32-bit microcontroller running at 200 MHz, integrating 512 KB of Flash and 128 KB of SRAM in a 100-lead TFBGA (7x7 mm, 0.65 mm pitch) package. It belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, which targets connectivity-rich applications in industrial, automotive, IoT, graphics/HMI, and motor-control segments. The 200 MHz MIPS Warrior M-class core delivers up to 330 DMIPS and includes an IEEE 754-compliant FPU plus a DSP-enhanced engine with four 64-bit accumulators, single-cycle MAC, and saturating/fractional math. The 'T' suffix denotes Tape-and-Reel packaging, the 'I' denotes the -40C to +85C industrial temperature grade, and the 'GJX' suffix identifies the 100-pin TFBGA package. A 32-bit microcontroller (MCU) is an integrated circuit combining a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals (USB, Ethernet, ADC, PWM, timers, communication interfaces) into a single chip. The PIC32MZ EF family sits at the top of Microchip's MIPS-based 32-bit MCU portfolio and bridges into the broader category of embedded microcontrollers within the semiconductor taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> integrated circuit. Devices in this class typically replace separate microprocessor-plus-support-chip designs, lowering BOM cost and PCB area while providing deterministic real-time response. Key features of this variant include a hardware floating-point unit, dual-panel Flash for live update support, advanced analog with high-speed ADC, Hi-Speed USB, 10/100 Ethernet MAC, audio and graphics interfaces, and an integrated crypto engine on related family members (this specific variant is the no-Crypto, no-CAN member of the family). The 100-lead TFBGA package exposes the full peripheral set while keeping board footprint compact at approximately 49 mm squared. Typical applications include industrial automation controllers, IoT edge nodes with Ethernet connectivity, graphical HMI panels, audio processing products, motor-control inverter boards, and automotive body/comfort modules where the wide temperature range and connectivity peripherals fit naturally. The PIC32MZ EF family's combination of FPU + DSP extensions and high peripheral integration makes it well-suited to closed-loop control, networked sensors, and graphical user-interface designs. When designing with this device, ensure that the chosen TFBGA land pattern is fabricated precisely to JEDEC MS-026 tolerances to avoid solder-joint reliability issues and that all decoupling follows Microchip's recommended capacitor network. Plan for an external PHY when using the integrated Ethernet MAC and verify the chosen PHY reference design supports your required RMII/RGMII timing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8,45 En stock

PIC32MZ0512EFE100T-I/PT

PIC32MZ0512EFE100T-I/PT - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFE100T-I/PT is a 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz with 330 DMIPS, 512 KB of Flash program memory and 128 KB of SRAM, housed in a 100-pin TQFP package (12x12 mm). It is part of the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family targeting industrial, IoT, graphics/HMI and motor-control applications, with no on-board hardware cryptography engine. A 32-bit MCU is a microcontroller whose data path, registers and arithmetic logic unit operate on 32 bits per instruction. Within the broader taxonomy, the PIC32MZ EF belongs to the MCU -> microcontroller -> embedded processor -> semiconductor hierarchy, and combines an applications-class CPU core with rich connectivity peripherals (USB-HS, Ethernet, CAN, SQI). The 'T-I/PT' suffix indicates tape-and-reel packaging, -40C to +85C industrial temperature grade and a TQFP-100 pinout. Key features include an IEEE 754-compliant hardware FPU for single- and double-precision math, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, dual-panel Flash for live firmware update, 200 MHz operation yielding 330 DMIPS, and a broad peripheral set including USB 2.0 High-Speed, 10/100 Ethernet MAC, CAN, SQI, multiple I2C/SPI/UART and a 12-bit ADC with up to 42 analog inputs. The device supports 5V tolerant I/O on selected pins. Architecturally the part integrates a MIPS Warrior M-class core with tightly coupled FPU and DSP extensions, accelerating signal-processing and floating-point workloads while leaving headroom for an RTOS. The dual-panel Flash enables live-update firmware schemes, eliminating down-time during field upgrades. 128 KB SRAM supports packet buffering for Ethernet/USB stacks and large graphics frame buffers. Typical applications include industrial HMI panels with TFT LCD and touch, motor-control FOC drives, industrial IoT gateways with Ethernet/USB, automotive body and connectivity modules, and graphics-rich consumer devices. Pricing references below reflect distributor data as of 2026-10-04. When designing with this MCU, allocate decoupling per the datasheet and follow Microchip's trace-length guidance for USB-HS and Ethernet to pass compliance. Plan dual-panel firmware images in flash to leverage live update. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7,42 En stock

PIC32MZ0512EFE124-E/TL

PIC32MZ0512EFE124-E/TL - 32-bit MCU 200MHz 512KB Flash 124-VTLA | Microchip

The Microchip Technology PIC32MZ0512EFE124-E/TL is a 32-bit MIPS32® M-Class PIC® 32MZ microcontroller with FPU, 512KB Flash, 128KB RAM, and a maximum CPU speed of 200 MHz, packaged in a 124-pin VTLA (9x9 mm) thermally-enhanced laminate package. It integrates a high-performance MIPS Warrior M-class core with IEEE 754-compliant single-precision Floating Point Unit, DSP-enhanced four 64-bit accumulators with single-cycle MAC and saturating/fractional math, plus Dual Panel Flash for live-update support targeting IEC 60730 Class B firmware safety. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals (timers, ADC/DAC, communication controllers) into a single device. The PIC32MZ EF family sits at the top of the PIC32 hierarchy and is engineered for high-performance embedded applications requiring both connectivity and rich analog/mixed-signal integration. Key features include a 200 MHz / 330 DMIPS core with 252 MHz headroom in the family, 512 KB Flash with Dual Panel Live Update, 128 KB SRAM, Hi-Speed USB 2.0 (480 Mbps) with on-chip PHY, 10/100 Ethernet MAC with IEEE 1588 PTP support, Serial Quad Interface (SQI) for external flash, up to 97 I/O lines, multiple 12-bit ADC and DAC channels, DMA controllers, and PWM peripherals suited for motor control. The VTLA-124 (9x9 mm) laminate package exposes a large die-attach pad for low thermal resistance in space-constrained designs. Architecturally, the device combines a 5-stage MIPS pipeline with tightly-coupled SRAM, hardware multiply-accumulate DSP extensions, and dedicated peripherals (USB, ENET, SQI, CAN, I2S) that offload the CPU. This balanced compute-and-connectivity integration eliminates the need for an external PHY or bus-marshalling CPLD in many designs. Typical applications include industrial automation, automotive connectivity gateways, IoT edge nodes, HMI/graphics terminals, audio processing with I2S/USB streaming, and motor control. The wide peripheral mix supports HMI + connectivity + analog sensing on a single chip. Designers should verify the Live Update dual-panel firmware sequence in MPLAB Harmony before field deployment and budget sufficient PCB copper under the exposed pad to honor thermal limits at high MIPS loads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $8,10 En stock

PIC32MZ0512EFE124-I/TL

PIC32MZ0512EFE124-I/TL - 32-bit MCU, 200MHz, 512KB Flash, USB-HS, Ethernet | Microchip

The Microchip PIC32MZ0512EFE124-I/TL is a high-performance 32-bit microcontroller from the PIC32MZ EF (Embedded Connectivity with FPU) family, featuring a MIPS32 M-Class Warrior core running up to 200 MHz with 330 DMIPS throughput, 512 KB of dual-panel Flash memory for live-update support, and 128 KB of SRAM, all integrated in a 124-pin VTLA (9x9 mm) package with exposed thermal pad. A 32-bit microcontroller (MCU) is an integrated circuit containing a 32-bit processor core, program memory, data memory, and a rich set of peripherals such as timers, communication interfaces, and analog blocks. PIC32 microcontrollers sit within the broader hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The EF family extends the PIC32MZ line with a hardware FPU, DSP-enhanced MAC engine, and connectivity peripherals (HS USB, Ethernet MAC, SQI), making these parts suitable for industrial, IoT, graphics/HMI, and motor-control applications. Key features include IEEE 754-compliant single/double-precision FPU, four 64-bit accumulators with single-cycle MAC and saturating fractional math, dual-panel Flash supporting live-update firmware field upgrades, 12-bit 18 MSPS ADC with up to 48 channels, and a comprehensive connectivity suite: HS USB 2.0 OTG, 10/100 Ethernet MAC with MII/RMII, SQI (Serial Quad Interface) for high-speed external Flash, six UART, four SPI, five I2C, PMP, and EBI/EMI for external memory expansion. The 124-pin VTLA package exposes an extensive GPIO count for parallel bus and multiplexed peripheral use. Architecturally, the PIC32MZ EF combines the MIPS Warrior M-class pipeline with a 2 KB instruction cache and a tightly-coupled FPU, delivering deterministic interrupt latency at 200 MHz while retaining low-power sleep modes for battery-aware IoT nodes. The 200 MHz rating (the EF family headline is 252 MHz for select parts) is combined with up to 32 KB of SRAM used as cache, allowing zero-wait-state execution from Flash under typical workloads. Typical applications include industrial Ethernet-connected controllers, USB host/device embedded peripherals, IoT gateways with TLS offload, graphics HMI panels with resistive touch, BLDC/PMSM motor control loops, and audio processing chains leveraging the DSP MAC instructions. The part is also widely used in medical instrumentation and aerospace-grade auxiliary controllers. Design considerations center on the 124-VTLA package: a 9x9 mm thermally enhanced laminate substrate that requires careful fanout and at least four PCB layers for signal integrity on parallel buses. Always place at least one 100 nF decoupling cap per VDD pin pair and a bulk 4.7 uF ceramic near the regulator output. This page synthesizes verified distributor pricing, same-package drop-in alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

USD $5,72 En stock

PIC32MZ0512EFE124T-I/TL

PIC32MZ0512EFE124T-I/TL - 200MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ0512EFE124T-I/TL is a high-performance 32-bit MIPS32 M-Class PIC microcontroller rendered as a high-performance 32-bit MIPS32 M-Class PIC microcontroller offering 200 MHz CPU speed, 512 KB Flash and 128 KB SRAM, and a rich connectivity peripheral set in a 124-pin VTLA (9x9) package with exposed pad. The PIC32 family of microcontrollers is Microchip's high-performance MIPS-based line that bridges 8/16-bit PIC MCU simplicity with 32-bit application-processor class performance. PIC32MZ EF devices specifically target connectivity-rich applications with on-chip USB 2.0 High-Speed, 10/100 Ethernet MAC, SQI (Serial Quad Interface) for high-throughput memory expansion, and a complete set of serial interfaces. They are widely used in industrial, IoT, HMI graphics, motor control and automotive-adjacent segments. Key specifications for PIC32MZ0512EFE124T-I/TL include 200 MHz core clock, 512 KB Flash program memory organized as 512K x 8, 128 KB SRAM, 124-pin VTLA (9x9 mm) package with exposed thermal pad, USB-HS, Ethernet MAC, SQI, multiple UART/SPI/I2C, and 12-bit ADC. The "I" in -I/TL denotes the -40C to +85C industrial temperature grade and "TL" identifies the VTLA tape-and-reel packaging suffix. This part is fabricated in CMOS process technology with on-chip FPU support and tightly-coupled peripherals. Compared to PIC32MX predecessors, the EF family adds significantly higher throughput, larger SRAM, dedicated crypto-less variants (the "EF" suffix means no on-chip crypto) and pin-compatible scalability across 64/100/124-pin options, enabling designers to migrate up or down without board re-layout. Typical applications include industrial control and HMI panels, USB device and host peripherals, Ethernet-connected IoT gateways, graphical display controllers with external SQI flash, motor control FOC platforms, and medical instrumentation front-ends. The 124-pin package also exposes enough I/O for parallel-camera or TFT-LCD drive. Designers should plan decoupling around the 124-pin VTLA's exposed thermal pad and route the high-speed USB and Ethernet differential signals as 90-ohm differential pairs with controlled impedance. Always confirm the migration path against the PIC32MZ EF datasheet family specification, since pin alternate-function maps differ across 64/100/124 variants. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design notes that complement the Microchip datasheet.

USD $7,10 En stock

PIC32MZ0512EFE144-E/JWX

PIC32MZ0512EFE144-E/JWX - 32-bit 180MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE144-E/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, featuring a 180 MHz CPU core, 512 KB of Flash program memory, and 128 KB of SRAM, packaged in a 144-pin TFBGA (7x7 mm, 1.02 mm height). The part is supplied in Tray packaging and is rated for the -40C to +125C extended (E) temperature range suitable for industrial and automotive-grade applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals; the PIC32MZ EF family represents Microchip's high-end 32-bit MCU tier, positioned between standard microcontrollers and application processors. The PIC32MZ EF series targets connectivity, industrial automation, automotive, IoT, graphics/HMI, and motor control applications by combining a high-performance MIPS32 core with rich connectivity peripherals such as Ethernet, USB, CAN (omitted in this "No CAN" variant), and high-speed ADCs. Key features of the PIC32MZ0512EFE144-E/JWX include a MIPS32 M-Class core with DSP instructions, up to 120 general-purpose I/O pins, integrated 12-bit ADC and analog comparators, multiple UART/SPI/I2C peripherals, hardware crypto acceleration is omitted in the "EFE" variant, and CAN-FD is omitted per the "No CAN" suffix. The wide operating voltage range of 2.0V to 3.6V supports both battery-powered and industrial 3.3V systems. The 144-TFBGA package footprint keeps the device compatible with the rest of the PIC32MZ EF 144-pin family, enabling PCB layout reuse across variants. Typical applications include industrial control panels, building automation gateways, USB/Ethernet-connected sensor hubs, low-cost graphics HMI displays, and BLDC/PMSM motor control firmware. The combination of large Flash and SRAM resources makes the part well-suited to embedded protocol stacks (TCP/IP, MQTT, USB device classes) without external memory. When designing with this MCU, place decoupling capacitors (100 nF plus 4.7 uF bulk) within 3 mm of each power pin and follow Microchip's TFBGA layout guidelines for the 0.5 mm pitch land pattern to ensure reliable reflow. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MZ family, and practical design notes that are not present in the manufacturer datasheet. Engineers evaluating the PIC32MZ0512EFE144-E/JWX should treat it as the cost-optimized member of the EF family and use the comparison table to weigh it against higher-speed and larger-memory siblings.

USD $6,55 En stock

PIC32MZ0512EFE144-E/PH

PIC32MZ0512EFE144-E/PH - 180MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE144-E/PH is a 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with 512 KB of Flash and 128 KB of SRAM, housed in a 144-pin TQFP (16x16 mm) package. The -E suffix indicates the extended industrial temperature grade (-40C to +125C), making it suitable for harsh-environment and AEC-Q100-adjacent applications. The device integrates a hardware Floating Point Unit (FPU), four 64-bit accumulators, single-cycle MAC, and IEEE 754-compliant math for DSP workloads. What is a PIC32MZ EF microcontroller? The PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family is Microchip's premium 32-bit MIPS Warrior M-class line that combines high-performance CPU cores with rich connectivity peripherals. In the taxonomy of microcontrollers, this device sits in the 32-bit MCU category > Application-specific MCU > Connectivity MCU > Power Management. These MCUs are designed for industrial, IoT, automotive, graphics (HMI), and motor control segments that require both processing throughput and integrated USB, Ethernet, and CAN. Key features include a 200 MHz / 330 DMIPS core (the -E variant is derated to 180 MHz for thermal envelope), 12-bit ADC at 18 MSPS, dedicated USB 2.0 High-speed PHY, 10/100 Ethernet MAC with IEEE 1588 support, CAN 2.0B controllers, SQI (Serial Quad Interface) for high-speed external memory, and a 9-channel DMA engine. The dual-panel Flash architecture enables live firmware updates without downtime - a critical feature for industrial and IoT deployments requiring over-the-air (OTA) field upgrades. Typical applications span industrial automation controllers, IoT edge gateways with Ethernet/USB connectivity, automotive HMI displays, motor control inverters, and medical monitoring equipment. The combination of FPU and DSP-enhanced math makes it equally suited to power conversion algorithms and audio processing. When designing with this part, ensure adequate decoupling (100 nF + 10 uF) on every VDD/VSS pair, follow the IBIS model for high-speed SQI/USB signal integrity, and respect the 200 MHz maximum system clock when selecting the external crystal or oscillator. This page synthesizes distributor pricing, drop-in alternative MPNs, and engineering design notes not found in the standalone manufacturer datasheet - giving procurement and design engineers a single reference for part selection, cross-reference, and BOM management.

USD $6,84 En stock

PIC32MZ0512EFE144-E/PL

PIC32MZ0512EFE144-E/PL - 200MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ0512EFE144-E/PL is a 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz core clock and delivering 330 DMIPS with an integrated IEEE 754-compliant FPU and DSP-enhanced core. It is housed in a 144-pin LQFP package (PL) at 20x20 mm body size, integrating 512 KB Flash with Dual Panel Live-Update support and 128 KB SRAM. The 'E' suffix designates the -40C to +125C extended operating temperature range targeting automotive and industrial applications. A 32-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on one silicon die. Within Microchip's taxonomy, PIC32MZ EF devices sit in the high-performance tier above PIC32MX and are part of the broader MIPS-based 32-bit MCU category competing with ARM Cortex-M4/M7 parts. The FPU and DSP extensions make these MCUs well suited to signal-processing tasks traditionally handled by dedicated DSPs. Key features include HS USB 2.0 (Host/Device/OTG), 10/100 Mbps Ethernet MAC with MII/RMII interfaces, two SQI (Serial Quad Interface) ports for high-speed serial Flash expansion, up to 12-bit ADC with 18 MSPS sampling rate, advanced analog comparators, multiple UART/SPI/I2C channels, and a graphics-capable PMP (Parallel Master Port) for direct LCD drive. The integrated crypto-less design of the 'E' variant reduces BOM cost for non-security-critical deployments. Typical applications include industrial IoT gateways requiring Ethernet, automotive HMI and telematics, USB-enabled embedded products (audio docks, HID peripherals), building automation controllers, and motor-control BLDC/PMSM drive boards where the FPU accelerates Clarke-Park transforms. MPLAB Harmony v3 framework support enables rapid peripheral driver generation. When designing with this device, plan the 144-pin LQFP layout carefully - the 0.5 mm pitch and 20x20 mm body demand 4-layer PCB with 0.2 mm/0.2 mm trace/spacing minimums for assembly yield. Decouple VDDCORE with 1 uF + 100 nF per pin and reserve boot-mode pull-ups on PGECx/PGEDx pairs for ICSP programming.

USD $7,75 En stock

PIC32MZ0512EFE144-I/PH

PIC32MZ0512EFE144-I/PH - 200MHz 32-bit MCU 512KB Flash 144-TQFP | Microchip

The Microchip Technology PIC32MZ0512EFE144-I/PH is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz, integrating 512 KB Flash and 128 KB SRAM in a 144-pin TQFP (16x16 mm) package. It belongs to the PIC32MZ EF family of "Embedded Connectivity with Floating Point Unit" devices, featuring an IEEE 754-compliant hardware FPU, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, plus dedicated audio (I2S) and graphics (EBI) interfaces. The device is offered without on-board crypto acceleration (No Crypto suffix), reducing cost for designs that do not require hardware AES/SHA. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADC, communication interfaces) into one package. The PIC32MZ family sits in the hierarchy 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. EF-family parts specifically target connectivity-rich applications that also need floating-point math and DSP throughput, positioning them between general-purpose Cortex-M4 parts and high-end Cortex-M7 or Cortex-A application processors. Key features of the PIC32MZ0512EFE144-I/PH include HS USB 2.0 (Host/Device/OTG), 10/100 Mbps Ethernet MAC, dual CAN 2.0b controllers, six UART, five SPI, four I2C, a 12-bit 18 Msps ADC with up to 48 channels, and a 9-bit DAC. Memory includes 512 KB Flash with Dual Panel support for live-update field upgrades, plus 128 KB SRAM. Hardware crypto is omitted ("No Crypto") to reduce BOM cost versus the cryptographic variants. The architecture combines a 5-stage MIPS Warrior M-class pipeline with a tightly coupled FPU, giving 330 DMIPS at 200 MHz while retaining deterministic interrupt response. Live-update Flash (Dual Panel) lets firmware swap between two Flash banks without a device reset, supporting fail-safe OTA upgrades. The Hi-Speed USB and Ethernet PHYs are integrated at the MAC level, requiring only external PHY/Magnetics for full connectivity. Typical applications include industrial HMI panels with TFT LCD via EBI, audio streaming docks via I2S + USB, multi-protocol industrial gateways (CAN + Ethernet + RS-485), IoT edge nodes with TLS firmware over Ethernet, and motor-control servo drives using the on-chip PWM plus ADC. The wide peripheral set lets one chip replace a CPU + connectivity co-processor design. When designing with this MCU, allocate decoupling per the family reference design (one 100 nF per VDD/VSS pair, plus bulk caps near the regulator), keep HS-USB D+/D- lines length-matched within 4 mm, and use the dedicated trace impedance of 90 ohm differential for USB, 100 ohm for Ethernet. Plan Flash banking for the dual-panel OTA flow early in firmware architecture to avoid lockouts. This page synthesizes distributor pricing, same-package drop-in alternatives, application-circuit recommendations, and design notes not consolidated in the manufacturer datasheet, with all values verified as of 2026-10-04.

USD $7,05 En stock

PIC32MZ0512EFE144-I/PL

PIC32MZ0512EFE144-I/PL - 200MHz 32-Bit MCU 512KB Flash | Microchip

The Microchip PIC32MZ0512EFE144-I/PL is a high-performance MIPS32 M-Class 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering 200 MHz CPU clock and 330 DMIPS performance with integrated FPU and DSP extensions. It features 512 KB Flash and 128 KB SRAM in a 144-pin LQFP (20x20 mm) package, with 3.3V single-supply operation. The device integrates dual-panel flash for live-update support, IEEE 754 compliant FPU, and four 64-bit accumulators with single-cycle MAC and saturating fractional math, enabling high-throughput signal processing. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, providing substantially higher arithmetic throughput than 8-bit or 16-bit MCUs while retaining deterministic real-time behaviour. Modern 32-bit MCUs integrate CPU core, flash program memory, SRAM, ADCs, communication peripherals, and timers on a single die. PIC32MZ EF parts belong to the broader RISC microcontroller taxonomy (CPU -> RISC -> 32-bit MCU -> ARM/MIPS variants -> PIC32MZ EF family), and are typically deployed in connected and graphics-rich embedded systems where MIPS-class cores outclass Cortex-M0/M3 in DSP workloads. Key differentiating features include up to 252 MHz operation (for higher-grade family members), 2 MB live-update Flash option, integrated HS USB, Ethernet MAC, CAN, and advanced analog including 12-bit ADC at 18 MSPS. The EF family specifically targets connectivity, industrial, automotive, IoT, graphics (HMI), and motor control market segments, with hardware crypto absent on this 'No Crypto' variant. Compared to lower-tier PIC32MX parts, EF devices deliver 2-3x the DMIPS and add a true IEEE-754 FPU. Architecture: MIPS Warrior M-class core with 16KB I-cache, 4KB D-cache, tightly-coupled memory, and a 7-stage pipeline. The peripheral set includes SQI for external serial flash, multiple UART/SPI/I2C, and high-speed connectivity IPs. The 144-LQFP package provides 120+ usable I/O with PPS (Peripheral Pin Select) remapping. Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS acceleration, multi-axis motor control (FOC), graphics HMI panels, automotive body/comfort modules, and audio DSP. The 'No Crypto' suffix indicates no hardware encryption engine, so secure applications should select the crypto-enabled variant. When designing with this device, route the two PGECx/PGEDx ICSP pairs to accessible debug headers, provide a 12 MHz primary crystal or use the internal FRC, and ensure 100 nF + 10 µF decoupling close to each VDD/VSS pair. For 252 MHz operation, verify the -E extended-temperature grade and follow the datasheet's high-speed layout guidelines for USB and Ethernet differential pairs. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

USD $6,95 En stock

PIC32MZ0512EFE144T-E/JWX

PIC32MZ0512EFE144T-E/JWX - 180MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip PIC32MZ0512EFE144T-E/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, operating at up to 180 MHz with 512 KB Flash and 128 KB SRAM, housed in a 144-ball TFBGA (7x7 mm, JWX) package. The 'T' suffix denotes tape-and-reel packaging and the 'E' temperature grade extends operation from -40C to +125C for industrial and harsh-environment designs. A 32-bit microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and analog blocks. The PIC32MZ EF family sits in Microchip's high-performance MIPS32 tier (MCU -> 32-bit MCU -> PIC32 family -> PIC32MZ EF sub-family), targeting connectivity applications in industrial, automotive, IoT, graphics/HMI, and motor-control segments where deterministic real-time performance and high throughput are required. Key features of the PIC32MZ0512EFE144 include an integrated Floating Point Unit (FPU) for single-precision IEEE 754 math, a 200 MHz maximum core clock for the family, advanced analog peripherals, audio and graphics interfaces, Hi-Speed USB, and 10/100 Ethernet MAC. The 'No Crypto / No CAN' variant disables the on-chip crypto engine and CAN-FD peripherals, simplifying firmware for non-automotive, non-secure designs and reducing silicon cost. Architecturally, the PIC32MZ EF combines a 32-bit MIPS M-class core, dual-bank Flash with live update support, and Microchip's Harmony-driven peripheral library. The integrated FPU accelerates DSP and motor-control loops, while up to 120 general-purpose I/O lines support mixed-signal interfaces. The 144-ball TFBGA package provides compact, high-density routing for board-constrained designs. Typical applications include industrial automation controllers, IoT edge gateways with Ethernet, graphics/HMI touch panels, audio processing systems, motor control inverters, and high-speed sensor fusion nodes. Developers also use the PIC32MZ EF family as a bridge MCU between lower-cost PIC16/PIC24 parts and more complex Linux-capable SOMs. When designing with this part, allocate PCB area for the 0.5 mm-pitch TFBGA - reflow profile and via-in-pad stackups must be qualified before production. Use MPLAB Harmony 3 to configure the Ethernet, HS-USB, and FPU libraries; ensure the Vddcore decoupling network matches the 1.2 V internal regulator requirements of the PIC32MZ EF family. This page synthesizes distributor pricing, drop-in PIC32MZ alternatives in the same TFBGA-144 footprint, and practical design notes drawn from the Microchip PIC32MZ EF datasheet - not found on any single distributor listing.

USD $7,93 En stock

PIC32MZ0512EFE144T-I/JWX

PIC32MZ0512EFE144T-I/JWX - 200MHz 512KB Flash MCU | Microchip 144-TFBGA

The Microchip Technology PIC32MZ0512EFE144T-I/JWX is a 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 144-lead Thin-profile Fine-pitch Ball Grid Array (TFBGA) measuring 7 mm x 7 mm with 0.5 mm pitch. As a member of the PIC32MZ EF family, it integrates a Floating Point Unit (FPU), High-Speed USB, Ethernet MAC, and advanced analog peripherals including a 12-bit ADC, while omitting the Crypto and CAN modules to reduce cost and pin count. The tape-and-reel 'T' suffix and 'I' temperature grade (-40C to +85C industrial range) target high-volume industrial and consumer embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and programmable peripherals on one die. The PIC32MZ EF series occupies the high-performance tier of Microchip's 32-bit MCU portfolio, sitting below the PIC32MZ DA family (which adds integrated graphics LCD controllers) and above the mid-range PIC32MX families. Compared to 8-bit PIC MCUs, the 32-bit MIPS core delivers approximately 10x to 50x the processing throughput per MHz and enables native execution of full TCP/IP networking protocols and DSP algorithms. Key features of the PIC32MZ0512EFE144T-I/JWX include the MIPS32 microAptiv core with hardware multiply/divide, a 12-bit 18-channel ADC capable of 500 ksps conversion, six UART/SPI/I2C modules, parallel master port (PMP) for external memory or graphics, and a high-speed 480 Mbps USB 2.0 OTG controller. The integrated FPU accelerates single-precision floating-point math, which is critical for sensor fusion and audio processing workloads. Internal DMA and separate buses for Flash and SRAM keep the CPU fed with data even under heavy peripheral traffic. The 144-TFBGA package provides 120 general-purpose I/O lines routed across 12 I/O banks, supporting 5V tolerant inputs on most digital pins. Power management includes multiple low-power sleep modes (Idle, Sleep, Deep Sleep) and a separate Real-Time Clock (RTC) domain that retains a 32 kHz oscillator while the main core is powered down. The architecture uses a 2.5V internal LDO derived from the 3.3V external supply, with brown-out reset and watchdog timer support. Typical applications include industrial IoT gateways with Ethernet connectivity, USB human-interface devices such as HID peripherals and audio streaming endpoints, HMI front panels driving small TFT displays via PMP, sensor hubs aggregating analog front-end data, and motor-control reference designs. Because the 'EFE' variant lacks Crypto and CAN, it is best suited to non-automotive and non-secured-connectivity applications; engineers needing CAN should step up to the 'EFH' or 'EFK' variants of the same family. When designing with this MCU, ensure the PCB supports 0.5 mm BGA pitch with via-in-pad or dog-bone fan-out. Provide a clean 3.3V rail with decoupling rated for the 200 MHz core transients, and follow the xH-pin series output allocation rules. The boot configuration must be set before enabling support to enable external memory mapping or debug, and the trace pins should be allocated first to retain JTAG access. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet.

USD $7,71 En stock

PIC32MZ0512EFE144T-I/PH

PIC32MZ0512EFE144T-I/PH - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFE144T-I/PH is a 32-bit MIPS Warrior M-class microcontroller from the PIC32MZ EF family, featuring a 200 MHz CPU core with 330 DMIPS performance, 512 KB of Flash program memory, and 128 KB of SRAM, housed in a 144-pin TQFP (16x16 mm) package supplied on tape and reel. This industrial-temperature (-40C to +85C) variant targets connectivity-rich embedded designs without cryptographic hardware requirements. A 32-bit MCU (microcontroller) is a single-chip computer integrating a 32-bit CPU core, program and data memory, and a rich set of peripherals (ADC, timers, communication controllers) on one die. Microcontrollers sit within the broader category of embedded processors alongside microprocessors, DSPs, and SoCs. The PIC32MZ EF family hierarchy is: PIC32MZ EF -> PIC32MZ family -> PIC32 -> 32-bit MCU -> microcontroller -> semiconductor. This MIPS-based lineage emphasizes deterministic real-time performance and low interrupt latency. Key features include a single-cycle hardware multiply-accumulate (MAC) DSP extension, IEEE 754 single/double-precision floating-point unit (FPU), 4 KB instruction cache with prefetch, and a Memory Protection Unit (MPU) for safety-critical code isolation. Integrated peripherals cover USB 2.0 high-speed with PHY, two CAN 2.0B controllers, ten UART modules, six SPI/I2S ports, four I2C buses, a 12-bit 18 MSPS ADC with up to 42 analog inputs, nine 16-bit timers/counters, and a graphics-compatible parallel master port for TFT displays. The architecture combines a 5-stage MIPS pipeline with tightly-coupled SRAM and a multi-channel DMA controller, enabling deterministic response for industrial protocols such as EtherCAT, Profinet, and Modbus TCP. The floating-point unit accelerates sensor-fusion algorithms used in motor control and predictive maintenance, while the cryptographic accelerator (absent in the EFE variant) keeps cost and power low for non-secure applications. Typical applications include industrial IoT gateways, building-automation controllers, motor-drive MCUs, human-machine interface (HMI) panels, point-of-sale terminals, and connectivity modules for HVAC and energy management. The wide peripheral mix also suits multi-protocol bridges in factory automation. When designing with this part, budget adequate decoupling (100 nF per VDD pin plus bulk) and follow Microchip's recommended 4-layer stack-up to meet USB 2.0 HS signal-integrity targets. The EFE variant omits the crypto engine, so select the EFC variant instead if your application requires hardware AES or secure boot. This page consolidates distributor pricing, drop-in same-package alternatives, and practical design guidance beyond the manufacturer datasheet. All specs and alternative ratings are sourced from Microchip product documentation and DigiKey parametric data as of 2026-10-04.

USD $10,45 En stock

PIC32MZ0512EFE144T-I/PL

PIC32MZ0512EFE144T-I/PL - 200MHz 512KB Flash MCU | Microchip

The Microchip PIC32MZ0512EFE144T-I/PL is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, delivering up to 200 MHz core clock with 330 DMIPS performance and an integrated IEEE 754-compliant FPU in a 144-pin LQFP (20x20 mm) package. The device provides 512 KB Flash with live-update dual-panel architecture and 128 KB SRAM, targeting connected industrial, IoT, graphics HMI, and motor-control designs. A 32-bit microcontroller (MCU) is a microprocessor core combined with on-chip memory, peripherals, and I/O on a single silicon die. The PIC32MZ EF family sits within Microchip's higher-tier PIC32 lineup, with the M-Class MIPS Warrior core providing DSP extensions including single-cycle MAC, four 64-bit accumulators, saturating and fractional math. The FPU accelerates IEEE 754 single- and double-precision operations, making the family suitable for graphics, audio processing, and control loops. The dual-panel Flash supports live firmware updates without downtime, a key differentiator for industrial and IoT applications. The PIC32MZ0512EFE144T-I/PL integrates a hardware crypto accelerator (No Crypto variant in this MPN suffix), 12-bit 18 Msps ADC, high-speed USB, CAN, Ethernet, and a wide range of communication peripherals. Its 200 MHz CPU, DSP extensions, and FPU enable real-time signal processing tasks such as FFT-based motor control and graphics rendering for HMI displays. The device operates from 2.5V to 3.6V across the industrial -40C to +85C temperature range. Typical applications include industrial automation controllers, IoT edge nodes, HMI displays with graphics, BLDC/PMSM motor drives, and connected medical devices. The wide peripheral mix and large SRAM make it well suited as a system-on-chip in cost- and space-constrained designs where an external MPU plus companion ICs would add BOM cost. When designing with this device, ensure the 144-pin LQFP PCB layout provides adequate ground and power decoupling, with a 0.1uF ceramic cap on every VDD pin. The dual-panel Flash requires firmware designed for live-update partition management, and the Ethernet MAC needs an external PHY plus magnetics for 100 Mbps operation. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

USD $6,32 En stock

PIC32MZ0512EFF064-E/MR

PIC32MZ0512EFF064-E/MR - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF064-E/MR is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, running up to 200 MHz with up to 330 DMIPS, packaged in a 64-pin QFN (MR, 9x9 mm). It integrates 512 KB of Flash program memory and 128 KB of SRAM with FPU and DSP extensions, targeting Industrial, IoT, Graphics (HMI), Motor Control, and Automotive connectivity applications. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, memory (Flash + SRAM), and peripherals into one package. PIC32 microcontrollers are 32-bit MIPS-based MCUs with deterministic real-time performance. The PIC32MZ EF family adds a Floating Point Unit (FPU) and a MIPS Warrior M-class DSP-enhanced core to accelerate single-cycle MAC, saturating and fractional math operations in compliance with IEEE 754. In the broader taxonomy: MCU -> Microcontroller -> Embedded Processor -> Semiconductor -> Integrated Circuit. Key differentiating features include 200 MHz / 330 DMIPS core performance, IEEE 754-compliant FPU for fast single/double-precision math, four 64-bit accumulators, single-cycle MAC, and dual-panel Flash for live-update support. The device integrates Hi-Speed USB, 10/100 Ethernet MAC, CAN, SQI (Serial Quad Interface), and 12-bit ADC, providing extensive connectivity for industrial IoT gateways, automotive dashboards, and audio/graphics HMI applications. The PIC32MZ0512EFF064-E/MR is built on a low-power CMOS process and supports an extended temperature range suitable for harsh environments. The variant name decodes as follows: -E/ suffix denotes the -40C to +125C extended industrial temperature grade, /MR denotes the 64-pin QFN package. The device is also available without crypto acceleration for designs that don't require it. Typical applications include industrial control panels, IoT edge gateways with Ethernet connectivity, automotive instrument clusters, motor control inverters, and graphic HMI displays with touch. The 64-pin QFN package is suitable for compact designs where the 252 MHz-capable PIC32MZ EF family variants are also available. When designing with this MCU, allocate adequate decoupling (0.1 uF + bulk) near each VDD pin and follow the High-Speed USB and Ethernet PCB layout guidelines in the family reference manual. The QFN package has an exposed thermal pad that must be soldered to the ground plane for thermal dissipation and electrical performance. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes - information not consolidated in the manufacturer datasheet alone.

USD $5,74 En stock

PIC32MZ0512EFF064-E/PT

PIC32MZ0512EFF064-E/PT - 32-bit MIPS 180MHz MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF064-E/PT is a 32-bit MIPS32 M-Class microcontroller running at 180 MHz, integrating 512 KB of Flash and 128 KB of SRAM into a 64-pin TQFP (10x10 mm) package. It is part of the PIC32MZ EF family, which targets connectivity-rich embedded designs including industrial automation, automotive body/comfort, IoT gateways, HMI/graphics, and motor control segments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EF family belongs to the MIPS Warrior M-class 32-bit core family, sitting above 8/16-bit MCUs in compute hierarchy and below application processors in Linux-capable devices, and the FPU-equipped variant places these parts in the signal-processing-capable microcontroller tier. Key features of the PIC32MZ0512EFF064-E/PT include a 200 MHz/330 DMIPS core with IEEE 754-compliant FPU, dual-panel Flash for live-update firmware swap, four 64-bit accumulators with single-cycle MAC and saturating/fractional math, a 12-bit ADC with up to 24 channels, multiple connectivity peripherals (CAN, Ethernet, I²C, SPI, SQI, PMP, USB), and 8 DMA channels. The 'No Crypto' suffix indicates the on-board crypto engine is disabled, reducing BOM cost for non-security-sensitive designs. Architecturally, the device combines a deterministic MIPS32 core with tightly coupled peripherals and a high-bandwidth bus matrix. The 180 MHz rating in this -E/PT industrial-temp ordering code contrasts with the 200 MHz headroom of the family; system designers should target 180 MHz for full peripheral operation across -40 °C to +125 °C. Live-update dual-panel Flash is the headline reliability feature, allowing field firmware upgrades with zero downtime by alternating between two Flash banks. Typical applications for the PIC32MZ0512EFF064-E/PT include industrial IoT gateways with Ethernet/USB, HMI panels using PMP for LCD drive, automotive body controllers over CAN, motor-control BLDC/PMSM drivers, and connected medical instrumentation. The AEC-Q100 screening makes the part acceptable for non-safety-critical automotive subsystems. When designing in this MCU, allocate decoupling capacitors on every VDD/VSS pair, use a 4-layer PCB to manage the 180 MHz edge rates, and verify boundary-scan coverage for production test. Programming/debugging uses the standard 2-wire ICSP interface plus the JTAG/SWD boundary-scan ports. This page consolidates distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes drawn from the device family reference manual, supplementing the manufacturer datasheet with curated engineering context.

USD $6,10 En stock

PIC32MZ0512EFF064-I/PT

PIC32MZ0512EFF064-I/PT - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF064-I/PT is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz, integrating 512 KB of Flash program memory and 128 KB of SRAM in a 64-pin TQFP (10x10 mm) package with 0.50 mm pitch. The PIC32MZ EF family targets connectivity-rich applications and combines a MIPS32 microAptiv core with a hardware Floating Point Unit (FPU), HS USB 2.0 on-the-go, 10/100 Ethernet MAC, dual CAN 2.0b controllers, and a 50 MHz Serial Quad Interface (SQI) for external Flash/XIP expansion. An MCU (Microcontroller Unit) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. Within the broader taxonomy, a 32-bit MCU sits above 8-bit and 16-bit MCUs in computational throughput; the PIC32MZ EF family specifically layers a high-performance MIPS32 core, FPU, and dedicated connectivity peripherals on top, placing it in the high-integration MCU category alongside ARM Cortex-M4/M7 based parts from competing vendors. This hierarchy matters when selecting memory footprint, peripheral count, and real-time determinism for a given application. Key features include a 200 MHz core clock (the I-grade silicon version), integrated crypto engine support (this MPN is the No-Crypto variant), 12-bit 500 ksps ADC with up to 41 analog inputs, two comparators, four I2C, six UART, four SPI, and an audio I2S/SSI interface for graphics and audio bridging. The device operates from 2.3 V to 3.6 V across the industrial -40C to +85C temperature range and includes an 8-channel DMA, nine 16-bit timers/counters, and an RTCC. A unique Peripheral Pin Select (PPS) remapping matrix allows flexible mapping of digital peripherals to physical I/O pins. Architecturally, the PIC32MZ EF pairs the MIPS32 microAptiv core with a dedicated FPU and a high-bandwidth bus matrix, while the integrated HS USB PHY and Ethernet MAC eliminate the need for external transceiver components on most designs. Compared to the older PIC32MX series, the EF family roughly doubles Dhrystone MIPS performance, raises Flash/SRAM density, and adds modern peripherals such as SQI and crypto. Typical applications include industrial HMI with TFT LCD, USB host/device peripherals, Ethernet-connected sensors and gateways, automotive body/CAN networks, audio bridges to I2S codecs, and graphics-accelerated IoT nodes. The industrial -40C to +85C range supports factory and outdoor enclosures without derating. Design with the PIC32MZ EF series requires careful PCB layout for the analog and high-speed digital sections; place the 12-bit ADC reference and VDD rails through ferrite beads and use the recommended 4-layer stack-up for the HS USB and Ethernet differential pairs. The SQI interface can be used to add a small external Quad-SPI Flash for non-volatile data logging when internal Flash is exhausted. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC32MZ0512EFF064-I/PT that are not found in the standalone manufacturer datasheet.

USD $5,18 En stock

PIC32MZ0512EFF064T-I/MR

PIC32MZ0512EFF064T-I/MR - 200MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF064T-I/MR is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, delivering up to 200 MHz CPU performance with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. It integrates a hardware Floating Point Unit (FPU), HS USB 2.0 PHY, 10/100 Ethernet MAC, dual CAN 2.0b controllers, and a Serial Quad Interface (SQI) for high-speed external serial Flash, making it a single-chip connectivity platform for industrial, IoT, and graphical HMI designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, RAM, and a rich set of peripherals on a single die, enabling standalone embedded control. Within the broader semiconductor taxonomy, an MCU is a sub-category of microprocessors optimized for low power, deterministic real-time I/O, and small form-factor PCB integration. The PIC32MZ EF family specifically targets high-performance connected embedded designs that previously required a discrete MPU plus external peripherals. The PIC32MZ0512EFF064T-I/MR features 46 user I/O lines, multiple communication peripherals (UART, SPI, I2C, SQI, USB-HS, Ethernet, CAN), a 12-bit ADC with up to 48 channels, DMA with eight independent channels, and a 200 MHz core capable of 330 DMIPS and 1.5 DMIPS/MHz. The integrated FPU accelerates single- and double-precision floating-point math, simplifying sensor fusion, motor control, and audio DSP code. Live-Update Flash allows two independent Flash banks for in-field firmware upgrades without downtime, a key requirement for connected industrial and IoT endpoints. Architecturally, the PIC32MZ0512EFF064T-I/MR pairs the MIPS M-Class core with a multi-layer bus matrix that lets CPU, DMA, and the Ethernet MAC access RAM without contention. The 200 MHz operation with HS USB 2.0 (480 Mbps), 10/100 Ethernet MAC, dual CAN, and SQI delivering up to 80 MB/s to external Flash make this part a complete industrial connectivity node. The 9 mm x 9 mm QFN package with 0.5 mm pitch and an exposed pad supports compact PCB layouts while maintaining the thermal envelope required for industrial environments. Typical applications include industrial Ethernet gateways, USB audio class devices, CAN-based motor control nodes, graphical HMI panels, secure IoT edge nodes with encrypted firmware updates, multi-protocol industrial sensors, and automotive body/HMI subsystems requiring the same connectivity peripherals. The wide peripheral set eliminates external bridges, lowering both BOM cost and PCB area. When designing with this MCU, observe the 3.3 V (2.1 V to 3.6 V) supply window, route the exposed pad to a continuous ground plane, and provide separate analog and digital supply domains to maximize ADC accuracy. The Live-Update Flash feature requires careful linker-script planning to balance code across both banks. This page consolidates distributor pricing, parametric data, drop-in alternatives, and design notes beyond what is found in the manufacturer datasheet.

USD $2,55 En stock

PIC32MZ0512EFF064T-I/PT

PIC32MZ0512EFF064T-I/PT - 200MHz 512KB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ0512EFF064T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller running at up to 200 MHz, integrating 512 KB of Flash and 128 KB of SRAM in a 64-pin TQFP (PT) package measuring 10x10 mm with 0.5 mm pitch. Part of the PIC32MZ EF family, this device targets connectivity-rich applications across industrial, IoT, graphics/HMI, and motor-control segments. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals on one silicon die. Within the broader taxonomy, the PIC32MZ EF belongs to the 32-bit MCU class, which sits above 8/16-bit MCUs in processing power and is positioned between microprocessors and DSPs in compute density. Modern 32-bit MCUs like the PIC32MZ EF are the standard building blocks for connected, real-time embedded products. Key features include a MIPS32 M-Class core with hardware multiply/divide and DSP extensions, an integrated Floating-Point Unit (FPU) for single/double-precision math, 200 MHz operation delivering up to 252 MIPS, dual Flash panels with Live-Update for field firmware upgrades, and high-speed connectivity peripherals including HS USB, 10/100 Ethernet MAC, CAN 2.0B, SQI (Serial Quad Interface), and multiple UART/SPI/I2C ports. Advanced analog features include 12-bit ADC up to 18 Msps, analog comparators, and CTMU for touch sensing. Architecturally, the device combines deterministic real-time interrupt handling with rich graphics/audio interfaces (I2S, parallel graphics bus) and hardware crypto acceleration. The 512 KB Flash supports Live-Update partitioning, allowing safe firmware swap while running. The 64-pin TQFP provides 46 GPIO lines for parallel expansion. Typical applications include industrial Ethernet gateways, HMI touch panels, IoT edge nodes, motor-control BLDC drivers, and automotive infotainment subsystems. Its combination of connectivity, graphics, and DSP performance suits real-time connected embedded designs. When designing with this MCU, allocate adequate decoupling (100 nF per power pin plus bulk), follow TQFP land-pattern guidelines with thermal vias under the exposed pad, and reserve a dedicated 12 MHz crystal for the Ethernet PHY reference clock. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3,85 En stock

PIC32MZ0512EFF100-E/GJX

PIC32MZ0512EFF100-E/GJX - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFF100-E/GJX is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a 200 MHz MIPS32 M-Class core with 330 DMIPS, 512 KB Flash, and 128 KB SRAM in a 100-pin TFBGA (7x7 mm) package. It integrates a single-precision IEEE 754 Floating Point Unit (FPU), a DSP-enhanced core with four 64-bit accumulators, and a rich connectivity peripheral set including HS USB, Ethernet MAC, CAN, and multiple UART/SPI/I2C interfaces. The device is AEC-Q100 qualified for automotive applications and operates across an extended -40C to +125C temperature range. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, program and data memory, and a configurable peripheral set. The PIC32MZ EF family is positioned at the high end of Microchip's PIC32 portfolio, targeting applications that demand deterministic real-time response combined with rich connectivity. Within the broader taxonomy, this part is a 32-bit microcontroller -> RISC MCU -> embedded processor -> semiconductor IC. The MIPS32 M-Class architecture supports hardware multiply-accumulate, saturating and fractional math, and DSP primitives that simplify audio and motor-control firmware. Key features include dual-panel Flash for live firmware update, 12-bit ADC at 18 Msps, analog comparators, multiple timer/counter modules, an 8-bit parallel master port (PMP) for graphics, and dedicated audio interfaces (I2S/AC97). The 100-TFBGA package is paired with Microchip's MPLAB Harmony development framework, providing integrated middleware for USB, TCP/IP, graphics, and motor control. Typical applications include industrial automation controllers, automotive body and HMI modules, IoT edge gateways with Ethernet, graphics display terminals, and sensor-hub platforms. The combination of CAN, Ethernet, and HS USB makes it well suited for connected industrial nodes, while the FPU and dual-panel Flash support safety-critical firmware with in-field update capability. Designers should pay close attention to the 100-TFBGA PCB layout, which requires microvia or laser-drilled via stack-ups; the high 200 MHz core speed demands careful power-plane decoupling. The dual-panel Flash feature requires the application to manage two program images and a bootloader partition. AEC-Q100 qualification simplifies automotive end-product certification. This page synthesizes distributor pricing, drop-in alternatives drawn from the PIC32MZ EF family, and practical PCB design notes that supplement the manufacturer datasheet.

USD $7,62 En stock

Subcategorías

Productos (32725)