Circuitos integrados

PIC32MZ2048EFG144T-I/JWX

PIC32MZ2048EFG144T-I/JWX - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ2048EFG144T-I/JWX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin TFBGA (7x7 mm) package. It integrates an IEEE 754-compliant Floating Point Unit (FPU), four 64-bit accumulators, single-cycle MAC, and DSP-enhanced saturating and fractional math for high-performance signal processing. A 32-bit microcontroller (MCU) is a microprocessor optimized for embedded control, integrating CPU core, memory (Flash for code, SRAM for data), and peripherals on a single die. Within the broader taxonomy, the PIC32MZ EF family sits in the high-performance 32-bit MCU segment alongside ARM Cortex-M4/M7 devices, with the MIPS Warrior M-class core differentiating via its hardware multiply-accumulate and dual-panel Flash for live field-update support. EF-family MCUs are widely used in industrial, automotive, IoT, graphics (HMI), and motor-control segments where deterministic real-time performance and rich connectivity are required. Key features of the PIC32MZ2048EFG144T-I/JWX include 120 general-purpose I/O pins, 8 DMA channels, 9 timers, 2 watchdog timers, 2 analog comparators, an RTC, plus multiple I2C, SPI (SCI), and UART interfaces. The integrated FPU accelerates single- and double-precision floating-point operations, while dual-panel Flash enables live firmware updates without service interruption. The part operates from 2.1 V to 3.6 V across the industrial -40C to +85C range, with low-power sleep and idle modes managed by the PIC32 power-management unit. Typical applications include industrial HMI panels, IoT gateways, motor-control BLDC/PMSM drives, automotive connectivity modules, and graphics-touchscreen controllers. The 200 MHz core, 2 MB Flash, and 512 KB SRAM headroom allow full TCP/IP stacks (e.g., MPLAB Harmony), USB host/device, and graphics libraries to coexist with application code. When designing with this MCU, place 0.1 uF decoupling capacitors adjacent to every VDD/VSS pair and a bulk 10 uF near the regulator output. Use the on-board FPU for any double-precision math; do not emulate in software. Configure the on-chip LDO regulator mode and respect the 200 MHz VDD core voltage requirement. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page alone.

USD $8,95 En stock

PIC32MZ2048EFH064-250I/MR

PIC32MZ2048EFH064-250I/MR - 250MHz FPU MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH064-250I/MR is a 32-bit MIPS Warrior M-class microcontroller running up to 250 MHz (252 MHz max), delivering 330 DMIPS and packing 2 MB of dual-panel Flash plus 512 KB SRAM into a 64-pin QFN (9x9 mm) package with an integrated IEEE 754 floating-point unit. The device belongs to the PIC32MZ EF family and ships in industrial-grade -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ EF line sits in Microchip's high-performance tier above PIC32MX parts, targeting embedded connectivity, graphics, and motor-control applications. The MIPS Warrior M-class core extends the M4K lineage with DSP extensions - four 64-bit accumulators, single-cycle MAC, saturating and fractional math - giving it deterministic signal-processing capability alongside general-purpose control. Key features of this variant include the integrated FPU for fast single- and double-precision floating-point math, dual-panel Flash architecture enabling live firmware updates without downtime, and a rich peripheral set covering HS USB, Ethernet, CAN, six UART/I2C/SPI interfaces, SQI (Serial Quad Interface) for high-throughput memory expansion, a 12-bit ADC up to 500 ksps, and up to nine timers and nine PWM channels. The 250 MHz core is paired with 16 DMA channels to keep data movement off the CPU. Architecturally the device uses a Harvard cache with separate 32 KB instruction and data caches, prefetch buffers, and a tightly coupled tightly-coupled memory region for low-latency ISR code. The dual-panel Flash partitions the 2 MB into two independently erasable banks, so one panel can run application code while the other receives an over-the-air (OTA) firmware image, then the roles swap with a controlled reset - the canonical pattern for IEC 60730 functional-safety compliant updaters and for connected industrial controllers that cannot afford scheduled downtime. Typical applications include industrial Ethernet gateways, HMI/graphics terminals with TFT-LCD driving, motor control FOC stages, automotive telematics, IoT edge nodes, audio processing with USB streaming, and medical monitoring instrumentation. The combination of FPU, large SRAM, and Ethernet/USB makes the part particularly attractive for connected-control products that previously required an external MCU plus DSP or FPGA. When designing in this part, ensure the 64-pin QFN (MR) thermal pad is soldered to a grounded copper pour of at least 25 mm^2 to keep theta_JA within datasheet limits. Plan oscillator- and PLL-startup timing margins, and reserve one DMA channel for SQI transfers if you attach an external Flash or PSRAM for assets beyond the on-chip 2 MB. This page synthesizes distributor pricing, same-brand drop-in alternatives, design notes, and AI-citation-ready FAQ that are not consolidated on any single datasheet or distributor listing.

USD $13,51 En stock

PIC32MZ2048EFH064-250I/PT

PIC32MZ2048EFH064-250I/PT - 250MHz 32-Bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH064-250I/PT is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering a 250 MHz core clock in a 64-pin TQFP (10x10 mm) package. The device integrates 2 MB of Flash program memory and 512 KB of SRAM, runs the MIPS Warrior M-class core with an IEEE 754-compliant hardware FPU and DSP extensions, and is positioned for connectivity-rich industrial, automotive, IoT, graphics/HMI, and motor-control applications. What is a PIC32 microcontroller? PIC32 is Microchip's family of 32-bit MIPS-based microcontrollers, sitting at the top of the PIC architecture pyramid above PIC16 and PIC24 devices. The PIC32MZ EF subfamily is the connectivity flagship with dual-panel Flash for live-update field upgrades, a single-cycle hardware MAC for DSP, IEEE 754 single-precision FPU, and rich connectivity peripherals - placing this MCU between traditional 32-bit microcontrollers and high-end application processors in capability and integration. Key features include 252 MHz / 330 DMIPS core performance, four 64-bit accumulators with single-cycle MAC plus saturating and fractional math for DSP workloads, an IEEE 754-compliant hardware FPU for fast single-precision floating point, and a dual-panel Flash architecture that enables live firmware updates without downtime. The 64-pin TQFP package exposes extensive GPIO alongside Hi-Speed USB, 10/100 Ethernet MAC, CAN, SQI, and multiple SPI / I2C / UART interfaces. An industrial-grade -40C to +85C (I-grade) operating range supports harsh-environment deployment per the part's I-temp suffix. Typical applications include industrial automation controllers, IoT gateways with Ethernet and Hi-Speed USB, automotive infotainment and telematics, HMI / graphics terminals, BLDC and AC motor control, and audio processing. The combination of large memory, hardware FPU, DSP extensions, and on-chip Ethernet / USB makes this MCU a one-chip solution that previously required an MCU plus an external connectivity co-processor. When designing with this part, allocate careful pin budgeting since the 64-pin TQFP must route USB PHY lines, Ethernet MAC, CAN, SQI Flash, and JTAG simultaneously - the pin-multiplexing table should be reviewed early in the design. The dual-panel Flash enables A/B firmware updates for fail-safe field upgrades, a reliability advantage over single-bank Flash MCUs, and the I-grade temperature range makes the part directly suited to industrial enclosures. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes for the PIC32MZ EF family that complement the manufacturer datasheet and family reference manual.

USD $10,05 En stock

PIC32MZ2048EFH064-I/MR

PIC32MZ2048EFH064-I/MR - 200MHz 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048EFH064-I/MR is a 32-bit MIPS MCU from the PIC32MZ EF family, delivering up to 200 MHz core speed with 2 MB Flash and 512 KB SRAM in a 64-pin QFN (9x9 mm) package. It targets connectivity applications including industrial control, automotive, IoT, graphics/HMI, and motor control segments where deterministic real-time response plus high-bandwidth peripherals are required. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's high-performance 32-bit MCU line based on the MIPS Warrior M-class core, integrating an IEEE 754-compliant single-precision Floating Point Unit (FPU), four 64-bit accumulators with single-cycle MAC, saturating and fractional math support, and a dual-panel Flash architecture that enables live firmware updates without halting application execution. Positioned above the PIC32MX family in Microchip's portfolio, PIC32MZ EF devices combine MCU simplicity with DSP-grade signal processing and rich connectivity peripherals (HS USB, Ethernet, CAN, SQI). Key features of PIC32MZ2048EFH064-I/MR include 252 MHz maximum core speed (200 MHz for this -I/MR grade), 330 DMIPS performance, 2 MB dual-panel Flash supporting live update, 512 KB SRAM, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC, dual CAN 2.0b controllers, twelve-bit 18 MSPS ADC up to 48 channels, eleven independent timer/counters, and a peripheral trigger generator for deterministic ADC sampling. The 64-pin QFN package exposes 53 GPIO pins with multiple interrupt-on-change capability. Typical applications include industrial automation controllers requiring deterministic Ethernet/CAN connectivity, HMI/graphics terminals driving TFT LCDs via the integrated graphics interface, motor control drives benefiting from high-speed ADC and PWM, audio processing with I2S and codec interfaces, automotive gateway modules, and connected IoT edge nodes needing HS USB and crypto acceleration. The combination of FPU, large SRAM, and dual-panel Flash makes it well-suited to RTOS-based designs and run-time firmware updates in deployed products. When designing with this device, observe the operating junction temperature of -40C to +85C for the I-temperature grade, ensure adequate decoupling on each VDD/VSS pair (typically 100 nF plus 10 uF bulk), and use the 64-pin QFN thermal pad soldered to a continuous ground pour for best thermal and electrical performance. The I-grade variant limits max core speed to 200 MHz; the -250I/MR variant in the same QFN package reaches 250 MHz when higher throughput is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the right PIC32MZ EF variant for their application.

USD $10,10 En stock

PIC32MZ2048EFH064-I/PT

PIC32MZ2048EFH064-I/PT - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2048EFH064-I/PT is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. Key headline parameters include the 32-bit MIPS Warrior M-class core with single-cycle MAC, IEEE 754-compliant FPU, dual-panel Flash for live-update support, and HS USB plus 10/100 Ethernet connectivity peripherals. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program memory, data memory, and a rich set of peripherals. The PIC32MZ EF family sits in the high-performance tier of the PIC32 product line, targeting connectivity applications in industrial, automotive, IoT, graphics (HMI), and motor-control market segments. Within the broader hierarchy, this part is a 32-bit MCU > microcontroller > embedded processor > semiconductor IC. Key features include 200 MHz core speed delivering 330 DMIPS, four 64-bit accumulators with DSP-enhanced instructions, dual-panel Flash for seamless field firmware updates, and a high-speed 480 Mbps USB 2.0 OTG controller. The device integrates a 12-bit 5 MSPS ADC, multiple UART/SPI/I2C interfaces, CAN modules, and a graphics interface suitable for TFT displays. No cryptographic accelerator is present in this 'EF' (Embedded Connectivity with FPU) variant. Typical applications include industrial IoT gateways, automotive infotainment subsystems, HMI panels with TFT LCDs, motor-control inverters, and multi-protocol connectivity bridges. The wide peripheral mix also makes it suitable for high-speed data acquisition and audio processing subsystems. When designing with this device, plan for a 2.5V/3.3V supply and ensure firmware uses the dual-panel Flash to enable live update without downtime. For designs that need more I/O, the PIC32MZ2048EFH100 (100-pin) and PIC32MZ2048EFH144 (144-pin) variants share the same die and peripherals, allowing code reuse across the family. This page synthesizes distributor pricing, drop-in same-brand alternatives, and practical design notes not found in the standalone manufacturer datasheet, with every alternative cross-checked for 64-pin TQFP pin compatibility and parametric proximity.

USD $8,55 En stock

PIC32MZ2048EFH064T-250I/MR

PIC32MZ2048EFH064T-250I/MR - 250MHz, 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2048EFH064T-250I/MR is a 32-bit MIPS MCU from the PIC32MZ EF family running at 250MHz (up to 252MHz core / 330 DMIPS) with 2MB Flash and 512KB SRAM, housed in a 64-pin QFN (9x9 mm) package. It integrates a MIPS Warrior M-class core with DSP extensions (four 64-bit accumulators, single-cycle MAC, IEEE 754 FPU), and includes USB-HS, Ethernet, CAN, and SQI connectivity peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. Within the broader semiconductor taxonomy, an MCU belongs to the microcontrollers -> microprocessors -> integrated circuits hierarchy, and serves as the central processing element of any embedded system. The PIC32MZ EF family sits in the high-performance connectivity tier, between general-purpose Cortex-M class devices and application processors, targeting Industrial, IoT, HMI/graphics, and motor control applications. Key features include 2MB dual-panel Flash for live update support, 512KB SRAM, 12-bit ADC, six UART, four SPI, five I2C, two I2S, two CAN, USB-HS, and a 16-channel DMA. The dual-panel Flash enables firmware updates without downtime - one panel runs while the other is reprogrammed - critical for industrial IoT gateways and field-upgradable equipment. The IEEE 754 FPU accelerates single- and double-precision floating-point math, useful for sensor fusion and control loops. Operating voltage spans 2.3V to 3.6V with industrial -40C to +85C temperature grade. Typical applications include industrial IoT gateways with Ethernet and Wi-Fi co-processor links, automotive infotainment HMI panels, motor control BLDC/PMSM drives using the DSP-enhanced core, USB-audio/USB-MIDI devices, and CAN-bridge modules. The combination of dual-panel Flash, hardware crypto engine, and FPU makes it well suited for secure connected industrial endpoints. When designing with this MCU, allocate adequate Flash/RAM partitions to allow dual-panel live update (typically 50/50). Use the Microchip Harmony framework and MPLAB-X IDE for code generation. The 64-pin QFN requires careful PCB layout - the exposed pad must be soldered to a sufficient copper pour for thermal dissipation.

USD $7,20 En stock

PIC32MZ2048EFH064T-250I/PT

PIC32MZ2048EFH064T-250I/PT - 250MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFH064T-250I/PT is a high-performance MIPS32 M-Class PIC32MZ microcontroller running at up to 252 MHz (250 MHz rated speed grade) with 2 MB of Flash and 512 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It features an integrated FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, and IEEE 754-compliant floating-point arithmetic. The 'T' suffix denotes tape and reel packaging, '250' is the speed grade, 'I' denotes the industrial -40C to +85C temperature range, and '/PT' designates the TQFP-64 package. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, memory (Flash for code, SRAM for data), and a rich set of peripherals on a single silicon die. The PIC32MZ EF family extends the PIC32 architecture into the embedded connectivity segment with high-speed USB, Ethernet, CAN, and SQI interfaces, positioning it for industrial IoT gateways, automotive infotainment, HMI/graphics terminals, and motor control. Within the broader taxonomy, this part belongs to: microcontroller -> 32-bit MCU -> MIPS M-Class core -> connectivity MCU -> industrial/automotive MCU. Key features include 330 DMIPS, dual-panel Flash for live firmware update support, 2 MB Flash with 512 KB SRAM, integrated FPU, DSP-enhanced core, high-speed USB 2.0 (480 Mbps), 10/100 Ethernet MAC, CAN 2.0b, SQI (Serial Quad Interface) for external Flash, plus Audio I2S and Graphics peripherals. It also offers advanced analog including 12-bit ADC and multiple communication peripherals (I2C, SPI, UART, USART). Typical applications include industrial IoT gateways requiring Ethernet and CAN connectivity, automotive infotainment and HMI panels with graphics peripherals, motor control inverters with DSP-enhanced math, USB host/device embedded products, and medical instrumentation requiring deterministic real-time response. The 2 MB dual-panel Flash allows field firmware updates without service interruption, a critical feature for deployed industrial systems. Design considerations include the 3.3V supply requirement, decoupling capacitor placement near each power pin, and careful PCB layout for the high-speed USB and Ethernet differential pairs. For engineering samples and prototypes, the PIC32MZ EF Starter Kit provides a working reference design.

USD $14,10 En stock

PIC32MZ2048EFH064T-I/MR

PIC32MZ2048EFH064T-I/MR - 32-bit MCU, 2MB Flash, 200MHz, 64-QFN

The Microchip Technology PIC32MZ2048EFH064T-I/MR is a 32-bit MIPS32 M-Class PIC32MZ microcontroller IC with a 200 MHz core, 2 MB of Flash, and a 64-pin QFN (9x9 mm) package. This tape-and-reel, industrial-temperature variant belongs to the PIC32MZ EF family, which Microchip targets at connectivity, industrial, automotive, IoT, graphics (HMI), and motor-control applications. According to the Microchip PIC32MZ EF family datasheet, the device integrates an FPU, crypto acceleration, HS USB, Ethernet, CAN, and SQI peripherals. A 32-bit microcontroller (MCU) is an integrated computing device that executes instructions over a 32-bit data path, combining a CPU core, program memory, RAM, and a rich set of on-chip peripherals in a single package. The PIC32MZ EF family sits within the broader hierarchy of embedded MCUs -> 32-bit MCUs -> MIPS architecture -> PIC32 family -> PIC32MZ EF sub-family. It is widely used when engineers need deterministic real-time performance plus high-throughput connectivity for industrial control and graphics-rich HMIs. Key features of this device include up to 252 MHz maximum CPU speed in the EF family, 2 MB dual-bank Live-Update Flash, 512 KB SRAM, an integrated FPU, hardware crypto, Hi-Speed USB 2.0, 10/100 Ethernet MAC, CAN, SQI, and a 12-bit ADC. The 64-QFN (9x9 mm) package supports the standard PIC32MZ EF peripheral set, while the -I temperature grade covers -40C to +85C industrial operation. Architecturally, the PIC32MZ EF core uses the MIPS M-Class microAptiv core with a 5-stage pipeline, tightly coupled prefetch buffer, and a hardware multiply/divide unit. The dual-panel Flash with Live-Update allows firmware upgrades without downtime - one bank runs while the other is reprogrammed. The Hi-Speed USB and Ethernet controllers share DMA paths to SRAM, enabling high-throughput streaming without CPU stall. Typical applications include industrial automation controllers, automotive infotainment/HMI, IoT gateways, Ethernet-connected sensors, USB peripherals, and motor-control BLDC/PMSM drives. The 2 MB Flash accommodates large protocol stacks (TLS, MQTT, OPC-UA) plus graphics libraries such as MPLAB Harmony, while the FPU accelerates sensor-fusion and control-loop math. When designing with this device, ensure the 64-QFN thermal pad is soldered with sufficient copper pour to keep junction temperature in spec under peak CPU load. Decoupling capacitors must be placed as close as possible to the VDD/VSS pairs and the 12-bit ADC references benefit from an external low-noise LDO. MPLAB X IDE with XC32 compiler and Harmony 3 framework is the recommended toolchain. This page synthesizes distributor pricing across 8 channels, drop-in PIC32MZ family alternatives in the same 64-QFN footprint, and practical design notes not found in the manufacturer datasheet.

USD $6,88 En stock

PIC32MZ2048EFH064T-I/PT

PIC32MZ2048EFH064T-I/PT - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH064T-I/PT is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, delivering 200 MHz / 252 MIPS performance with 2 MB Flash and 512 KB SRAM in a 64-pin TQFP (10x10 mm) package. The "T" suffix indicates tape-and-reel packaging, while "-I/PT" denotes the industrial temperature grade (-40C to +85C) and TQFP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program storage, SRAM for runtime data), and a rich set of peripherals onto one die. The PIC32MZ EF family uses the MIPS32 M-class architecture (MIPS Warrior), placing it in the same architectural lineage as Cortex-M3/M4 devices for performance comparison. Within the broader taxonomy: MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MZ EF family -> connectivity/graphics family. The EF family specifically adds a hardware FPU, DSP extensions, and dedicated interfaces for high-speed connectivity and graphics/HMI workloads. Key features include 2 MB of Live-Update dual-panel Flash, 512 KB SRAM, integrated FPU with IEEE 754 single/double-precision support, HS USB 2.0, 10/100 Ethernet MAC, CAN 2.0B, SQI (Serial Quad Interface) for fast external memory, and 12-bit ADC at 18 MSPS. The device includes a 32 KB instruction cache plus 32 KB data cache and supports AES/DES/3DES/SHA/MD5 hardware crypto-acceleration blocks when the corresponding crypto variant is selected. Typical applications include industrial IoT gateways requiring Ethernet connectivity, HMI/graphics terminals with TFT LCD panels, automotive body and infotainment ECUs, motor control drives, USB audio class devices, and connected medical instrumentation. The combination of high-performance compute and rich connectivity peripherals makes the PIC32MZ EF a strong fit where a single-chip solution replaces an MCU plus discrete network controller. When designing with this part, ensure the 64-pin TQFP land pattern matches the 0.5 mm pitch pad geometry and that adequate decoupling is placed close to each VDD/VSS pair. Engineers using MPLAB Harmony 3 or the legacy MPLAB-X IDE with XC32 compiler can take advantage of integrated middleware for USB, Ethernet (TCP/IP via Harmony Net), and graphics libraries. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations that go beyond the manufacturer datasheet, helping engineers and procurement teams quickly evaluate the PIC32MZ2048EFH064T-I/PT for next-generation embedded designs.

USD $10,95 En stock

PIC32MZ2048EFH100-250I/GJX

PIC32MZ2048EFH100-250I/GJX - 252MHz 32-bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH100-250I/GJX is a 32-bit MIPS MCU from the PIC32MZ EF family running at up to 252 MHz (415 DMIPS) with 2 MB Flash and 512 KB SRAM, packaged in a 100-pin TFBGA (7x7 mm). It integrates a hardware Floating Point Unit (FPU), IEEE 754-compliant single- and double-precision math, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, plus High-Speed USB, Ethernet MAC, CAN, SQI, and 12-bit ADC. A 32-bit microcontroller (MCU) is an integrated processor core, program memory, data memory, and a rich set of peripherals on a single silicon die. The PIC32MZ EF family extends the 32-bit MCU taxonomy to high-performance connected nodes - 32-bit MCU -> embedded microcontroller -> SoC -> semiconductor - targeting designs that demand deterministic real-time control alongside wired connectivity and graphics HMI throughput. Key features include dual-panel Live-Update Flash for in-field firmware swap without downtime, dedicated crypto accelerators for AES/DES/SHA, a 200 MHz peripheral bus with independent DMA, and a graphics-friendly PMP/EPMP interface. The 100-pin TFBGA footprint delivers high pin density for space-constrained industrial and IoT gateways while exposing the full peripheral set. Architecture-wise, the device pairs the MIPS Warrior M-class core with a tightly-coupled FPU and dedicated DSP instructions, enabling sensor-fusion and audio-processing workloads to run on bare metal without an RTOS. The dual Flash banks, configurable ECC, and a hardware random number generator (RNG) accelerate IEC 62443-aligned firmware deployment. Typical applications include industrial IoT gateways, automotive HMI graphics, Ethernet-attached motor controllers, audio processing front-ends, and high-speed USB device/host peripherals. The combination of FPU throughput and 2 MB Flash makes the part suitable for protocols such as Modbus TCP, EtherCAT slave stacks, and lightweight TLS firmware where deterministic ISR latency and connected peripherals coexist. A primary design consideration is power-supply decoupling on the 100-pin BGA: place 100 nF X7R bypass caps directly under each VDD/VSS pair on the opposite PCB layer and keep trace lengths under 5 mm to the bond-wire balls. Also budget the Live-Update Flash swap window (~250 ms typical for the full 2 MB bank) when designing brown-out recovery and watchdog sequencing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

USD $13,50 En stock

PIC32MZ2048EFH100-250I/PT

PIC32MZ2048EFH100-250I/PT - 250MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH100-250I/PT is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, featuring a 250MHz MIPS Warrior M-class core (up to 252MHz / 415 DMIPS), 2MB of Dual-Panel Flash with live-update support, and 512KB of SRAM, all housed in a 100-pin TQFP (12x12 mm) package. The integrated IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional DSP math, plus 2MB Live-Update Flash and 512KB SRAM make this part a flagship PIC32 device for connected embedded systems. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU, on-chip memory (Flash for code, SRAM for data), and a rich set of peripherals (USB, Ethernet, CAN, SQI, ADC, timers, GPIO) into one package. The PIC32MZ EF family sits at the top of Microchip's PIC32 hierarchy, which itself descends from the 8-bit PIC lineage, extending to MIPS-based 32-bit devices aimed at industrial, IoT, graphics/HMI, motor control, and automotive connectivity applications. Compared to ARM Cortex-M4/M7 devices, PIC32MZ EF MCUs pair an FPU with a deterministic interrupt model and Microchip's MPLAB Harmony firmware ecosystem. Key features of the PIC32MZ2048EFH100-250I/PT include a 32-bit MIPS32 M-class core running at 250MHz (252MHz maximum), 2MB Dual-Panel Flash supporting live firmware update without downtime, 512KB SRAM, HS USB 2.0 with physical layer, 10/100 Ethernet MAC, CAN, SQI (Serial Quad Interface) for high-speed external memory, 12-bit ADC up to 18 MSPS, and a crypto engine with true RNG. The TQFP-100 footprint provides 78 programmable I/O, multiple UART/SPI/I2C peripherals, and dual ADC modules, enabling single-chip connectivity solutions without external glue logic. The PIC32MZ2048EFH100-250I/PT's 32-bit MIPS core with integrated FPU accelerates floating-point math for control loops and graphics rendering, while the 4KB instruction cache (with configurable prefetch) and tightly-coupled SRAM reduce Flash wait states. Dual-panel Flash architecture lets one bank run application code while the other receives an OTA image, enabling field firmware upgrades without service interruption. The 18 MSPS 12-bit ADC supports high-bandwidth current/voltage sensing for motor control and power conversion. Typical applications include industrial IoT gateways, graphics/HMI touch panels, motor-control drives (BLDC/PMSM), automotive connectivity modules, Ethernet-connected sensors, and USB-enabled medical devices. The combination of HS USB, Ethernet, and CAN lets a single chip replace two or three discrete MCUs in multi-protocol systems. When designing with this part, ensure the 100-pin TQFP is within thermal and routing capability - the chip can dissipate roughly 0.5W at full CPU and peripheral load. Use the SQI interface for high-throughput external NOR flash to support OTA logging, and leverage the dual-panel Flash for fail-safe firmware upgrades. The supplied 5V-tolerant I/O simplifies interface to legacy 5V sensors. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, giving engineers a single consolidated reference for sourcing and evaluating the PIC32MZ2048EFH100-250I/PT.

USD $9,40 En stock

PIC32MZ2048EFH100-E/GJX

PIC32MZ2048EFH100-E/GJX - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH100-E/GJX is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 2 MB of Live-Update Flash and 512 KB SRAM, housed in a 100-ball 7x7 mm TFBGA (GJX) package rated for the -40C to +125C automotive temperature range (AEC-Q100 qualified). It integrates a floating-point unit, Hi-Speed USB, 10/100 Ethernet MAC, CAN 2.0b, SQI, EBI, and a rich set of advanced analog peripherals targeting Industrial, IoT, HMI/Graphics, and Motor Control segments. A 32-bit microcontroller (MCU) is a programmable system-on-chip combining a CPU, memory, peripherals, and I/O. The MIPS32 M-Class microAptiv core family sits within the broader hierarchy of microcontroller -> embedded processor -> RISC CPU -> semiconductor. The PIC32MZ EF series adds a hardware Floating Point Unit for IEEE 754 single/double precision, eliminating software FP emulation in DSP and graphics workloads. Live-Update Flash enables firmware dual-bank OTA swap without chip reset, critical for always-on connected products. Key features include 200 MHz core / 252 MHz extended performance, 2 MB Live-Update Flash (dual-bank), 512 KB SRAM, 8-channel DMA, Hi-Speed USB 2.0 OTG with dedicated DMA, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b modules, up to six UART, four SPI, five I2C, parallel master port (PMP/EBI), SQI (Serial Quad Interface) for XIP memory expansion, 12-bit ADC up to 18 Msps, 16-bit PWM, and a TFT/GPU graphics interface (GPU module with 2D acceleration). The 100-ball GJX TFBGA package suits compact, high-density PCB designs with full 5V-tolerant digital I/O. The architecture combines a deterministic interrupt controller, dual-bank Flash with ECC, and a multi-channel DMA engine to offload peripherals from the CPU, sustaining throughput for industrial Ethernet or USB streaming while leaving headroom for an RTOS or application logic. AEC-Q100 Grade 1 qualification and the extended -40C to +125C operating range support under-hood and industrial cabinet deployments. Typical applications include industrial HMI panels with TFT touch, IoT edge gateways with Ethernet and Wi-Fi co-processor bridging, automotive body and infotainment subsystems, motor control FOC drives with high-resolution PWM, USB audio/MIDI products, and secure connected medical devices leveraging the Live-Update Flash for fail-safe OTA. Designers should allocate the 100-ball TFBGA escape with at least 6 PCB layers, providing a solid ground plane beneath the part and decoupling each VDD/VBUS rail with 100 nF plus 4.7 uF ceramic capacitors placed within 3 mm of the package balls. Program the dual-bank Flash map carefully to ensure bootloader and golden-image partitioning fits the 2 MB budget. This page synthesizes real-time distributor pricing, parametric drop-in PIC32 family alternatives, and application-specific PCB/design notes not consolidated in the Microchip datasheet.

USD $11,20 En stock

PIC32MZ2048EFH100-E/PF

PIC32MZ2048EFH100-E/PF - 200MHz 2MB MCU 100-TQFP | Microchip

The Microchip PIC32MZ2048EFH100-E/PF is a high-performance 32-bit microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-class Warrior core running up to 200 MHz with 415 DMIPS, 2 MB of dual-panel Flash and 512 KB SRAM, and an integrated IEEE 754-compliant Floating Point Unit (FPU), in a 100-pin TQFP package with 14x14 mm body. What is a PIC32MZ EF microcontroller? PIC32MZ EF (Embedded Connectivity with Floating Point Unit) is Microchip's high-performance MCU line combining a 32-bit MIPS core, large on-chip memory, and rich connectivity peripherals (HS USB, Ethernet, CAN, SQI). Within the broader taxonomy, it is a 32-bit microcontroller -> MCU -> embedded processor -> semiconductor. EF variants add an FPU and DSP extensions for signal-processing workloads. Key features include 2 MB dual-panel Live Update Flash (allowing field firmware swap without downtime), 512 KB SRAM, an integrated FPU for single- and double-precision math, DSP-enhanced core with single-cycle multiply-accumulate (MAC), four 64-bit accumulators, saturating and fractional arithmetic, and an Advanced Analog block with 12-bit ADC modules. The part carries the -E temperature grade (extended -40C to +125C). On the connectivity side the device integrates Hi-Speed USB 2.0 (Host/Device/OTG), 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b modules, SQI (Serial Quad Interface) for XiP execution, six UART/SPI/I2C modules, and parallel master port (PMP) for TFT-LCD and graphical HMI. Cryptographic acceleration is not present on the EFH100 variant (no crypto engine). Typical applications include industrial IoT gateways, automotive infotainment/HMI, USB and Ethernet-connected embedded products, motor control and digital power conversion, audio and graphics interfaces, and HomeGrid/Building Automation controllers. The 2 MB Live Update Flash is especially valuable for products that must stay online while firmware is updated. Design considerations: the 100-pin TQFP exposes the full peripheral set, but the wide 14x14 mm body and 0.5 mm pitch demand careful escape routing. Decouple each VDD/VSS pair with 100 nF plus bulk 4.7 uF placed within 2 mm of the pins. To remain permanently under the FPU and DSP bandwidth budgets, run the core at 200 MHz with 2.7-3.6 V supply; undervoltage during PLL erase invalidates flash operations. This page combines verified distributor pricing, drop-in alternatives, design notes, and a comparison table the Microchip datasheet does not provide in one place.

USD $12,35 En stock

PIC32MZ2048EFH100-E/PT

PIC32MZ2048EFH100-E/PT - 32-bit MCU 252MHz 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH100-E/PT is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 252 MHz, integrating 2 MB of Flash and 512 KB of SRAM in a 100-pin TQFP (PT) package. This device is part of the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a MIPS Warrior M-class core, IEEE 754-compliant FPU, and DSP-enhanced arithmetic with four 64-bit accumulators and single-cycle MAC operations. A 32-bit MCU (microcontroller) is an integrated circuit combining a high-performance processor core, on-chip memory, and a rich set of peripherals (timers, ADCs, communication controllers) on a single die. In the system hierarchy it sits above discrete microprocessors by integrating memory and I/O, and it belongs to the broader category of embedded controllers used in industrial automation, IoT edge nodes, motor control, and human-machine interface (HMI) systems. Key features include 415 DMIPS performance, dual-panel Flash architecture for live-update firmware support without downtime, Hi-Speed USB 2.0, 10/100 Ethernet MAC, CAN, and advanced analog with up to 48-channel 12-bit ADC at 3.75 Msps. The device integrates a hardware crypto accelerator on some family variants, but the PIC32MZ2048EFH100 base part is the no-crypto configuration, giving designers a lower-cost path for industrial and consumer applications. Typical applications include industrial control gateways requiring Ethernet connectivity, multi-protocol IoT edge nodes, HMI panels with graphics rendering, motor control for pumps and fans, audio processing for intercom and conference systems, and automotive body electronics. The -E/PT suffix denotes the -40C to +125C extended industrial temperature grade in a 100-pin TQFP package with standard tray packaging. When designing with this device, ensure your toolchain supports the MIPS M-class architecture (MPLAB XC32 compiler) and plan for adequate decoupling on the multiple VDD/VSS pin pairs. Use the dual-panel Flash feature to enable fail-safe firmware updates in the field.

USD $12,10 En stock

PIC32MZ2048EFH100-I/GJX

PIC32MZ2048EFH100-I/GJX - 200MHz MCU 2MB Flash 100-TFBGA | Microchip

The Microchip Technology PIC32MZ2048EFH100-I/GJX is a high-performance 32-bit microcontroller built on the MIPS32 M-Class (microAptiv) core running at 200 MHz (with the -250 variant reaching 252 MHz), integrating 2 MB of dual-panel Flash and 512 KB of SRAM in a 100-ball TFBGA package measuring 7 mm x 7 mm. It targets industrial, automotive, IoT, graphics/HMI, and motor-control applications where rich connectivity (USB-HS, Ethernet, CAN, SQI) and DSP/FPU performance are required. What is a PIC32MZ microcontroller? The PIC32MZ EF family sits at the top of Microchip's MIPS-based 32-bit MCU portfolio, classified as an embedded connectivity MCU with FPU. In the broader taxonomy: microcontroller (MCU) -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ EF sub-family -> high-performance connectivity segment. It pairs an IEEE 754-compliant FPU with a DSP-enhanced core (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), giving it up to 415 DMIPS / 3.28 CoreMark/MHz of throughput. Key features include a Crypto engine, 12-bit 18 MSPS ADC up to 48 channels, four comparators, four I2C, six UART, and Hi-Speed USB with PHY. The dual-panel Flash architecture enables live firmware updates without downtime, a critical feature for industrial gateways and remote sensors. Integrated peripherals such as Ethernet MAC, CAN 2.0B, and SQI (Serial Quad Interface) eliminate the need for external connectivity ICs, reducing both BOM cost and PCB area. The PIC32MZ2048EFH100-I/GJX uses a 5-stage pipeline, hardware multiply/divide, and tightly-coupled SRAM for deterministic interrupt latency. The dual-panel Flash provides seamless field upgrades, while dedicated crypto accelerators (AES, 3DES, SHA, MD5, HMAC) handle secure-boot and TLS workloads without burdening the CPU. The integrated 12-bit 18 MSPS ADC supports up to 48 analog inputs simultaneously, suiting motor-control and multi-sensor data acquisition. Typical applications include industrial automation controllers, automotive infotainment and HMI, IoT edge gateways, graphics-driven HMI panels, and BLDC/PMSM motor control. The wide connectivity suite also suits medical patient monitors and building-automation controllers that need Ethernet, CAN, and USB simultaneously. When designing with this MCU, budget attention to decoupling: at 200 MHz core clock with simultaneous peripheral activity, VDD/VUSB rails require multiple low-ESR 100 nF + bulk capacitors placed within 2 mm of each ball group. The dual-panel Flash simplifies field firmware upgrades but requires careful linker script setup; consult Microchip application notes on live update. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ EF family, and practical PCB layout guidance not found in the standalone datasheet.

USD $13,50 En stock

PIC32MZ2048EFH100-I/PF

PIC32MZ2048EFH100-I/PF - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH100-I/PF is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core running up to 200 MHz, integrating 2 MB of Live-Update Flash and 512 KB of SRAM in a 100-pin TQFP package. It belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, targeting connectivity-rich applications across industrial, automotive, IoT, graphics/HMI, and motor control segments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces) onto one die. The PIC32MZ EF family sits at the high end of Microchip's PIC32 portfolio, walking up the taxonomy from microcontroller -> 32-bit MCU -> MIPS-based MCU -> high-performance embedded connectivity MCU -> semiconductor. The integrated Floating Point Unit (FPU) accelerates single and double-precision IEEE-754 math, enabling signal-processing and control-loop workloads without taxing the integer pipeline. Key features include a hardware FPU, 2 MB dual-bank Live-Update Flash for field-upgradable firmware, 512 KB SRAM, Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, two CAN 2.0b controllers, a 12-bit 48-channel ADC at up to 3.75 Msps, six UART, four SPI, and five I2C peripherals, plus a 32-bit core-coupled memory controller and 8-channel DMA. The Live-Update dual-bank architecture allows firmware to be written to one bank while executing from the other, supporting fail-safe in-field upgrades. The architecture uses a 5-stage MIPS M-class pipeline with hardware multiply/divide and DSP extensions, providing 3.27 CoreMark/MHz performance. On-chip peripherals are interconnected via a high-bandwidth system bus, enabling simultaneous Ethernet, USB, and graphics display throughput without saturating the core. Industrial-grade temperature operation is supported. Typical applications include industrial Ethernet gateways, motor control inverters, automotive infotainment and HMI controllers, IoT edge nodes with TLS acceleration, and high-resolution graphics touch panels. The 100-pin TQFP gives generous GPIO and peripheral pinout options for these connectivity-rich designs. When designing, allocate careful PCB layout for the integrated Ethernet PHY and Hi-Speed USB - both require impedance-controlled traces, a 24 MHz crystal with precise load capacitors, and proper ground stitching. The Live-Update Flash feature requires the dual-bank linker script and a documented boot swap sequence in firmware. This page synthesizes distributor pricing, drop-in same-family and cross-brand alternatives, and practical design notes not found in the manufacturer datasheet, providing an engineering decision aid beyond what any single distributor page offers.

USD $11,88 En stock

PIC32MZ2048EFH100-I/PT

PIC32MZ2048EFH100-I/PT - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH100-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core, operating at up to 200 MHz with an integrated IEEE 754 Floating Point Unit (FPU), 2 MB of Flash program memory, and 512 KB of SRAM, all housed in a 100-pin TQFP (12x12 mm) industrial-temperature package. The part delivers up to 330 DMIPS of core performance, includes a 9-channel hardware crypto engine (AES, 3DES, SHA, MD5, HMAC), and integrates connectivity peripherals: Hi-Speed USB 2.0, 10/100 Ethernet MAC with RMII/MII, two CAN 2.0b controllers, six UART, four SPI, and five I2C ports. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. 32-bit MCUs like the PIC32MZ EF family extend 8-bit/16-bit MCU capabilities with wider registers, hardware floating-point support, and substantially more memory bandwidth, allowing them to run real-time operating systems, advanced communication stacks (TCP/IP, USB, CAN), and complex signal-processing algorithms in parallel. The PIC32MZ EF family sits within Microchip's broader PIC32 -> MIPS32 -> 32-bit MCU hierarchy and is widely used as a drop-in modernizer for legacy PIC32MX designs. Key features include dual-panel Flash enabling live-update firmware upgrades without production downtime, a 12-bit ADC with up to 48 channels and 500 ksps throughput, eight DMA channels that offload data movement from the CPU, and a 5V-tolerant I/O bank for direct interfacing to legacy industrial signals. The 2 MB program Flash is large enough to embed a full TLS 1.3 mbedTLS stack alongside an HTTP server while leaving room for a graphical HMI application. The MCU uses Microchip's Super Scalar MIPS32 M-Class pipeline, achieving 1.53 DMIPS/MHz, and a 2 KB instruction cache plus 128 KB data RAM backed by a tightly-coupled Flash prefetch controller that masks Flash wait states. The integrated crypto engine accelerates AES-256 at >100 Mbps, and the 10/100 MAC includes IEEE 1588 timestamping hardware for industrial Ethernet protocols like EtherCAT or Profinet synchronization. Typical applications include industrial IoT gateways combining Ethernet and USB, automotive infotainment HMI displays driven via the External Bus Interface (EBI) for TFT/LCD panels, multi-protocol sensor hubs aggregating UART/SPI/I2C/CAN traffic, motor-control FOC drivers, and graphics terminals. The 100-TQFP footprint offers 78 user I/O pins while remaining hand-solderable on 0.5 mm pitch, ideal for prototype runs and small-batch industrial SKUs. When designing with this MCU, pay close attention to decoupling: place a 0.1 uF X7R ceramic on every VDD/VSS pair within 3 mm of the pins and a bulk 4.7-10 uF tantalum on the main 3.3 V rail. Respect the trace-length matching rules on Ethernet MII/RMII signals (typically 50 ohm controlled impedance, <50 ps skew) to meet IEEE 802.3 timing margins. This page synthesizes distributor pricing, drop-in same-package alternatives, parametric comparison, and design notes not consolidated in the manufacturer datasheet, giving engineers a faster path to a validated BOM decision.

USD $8,90 En stock

PIC32MZ2048EFH100T-250I/PT

PIC32MZ2048EFH100T-250I/PT - 250MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFH100T-250I/PT is a 32-bit MIPS32 M-Class PIC microcontroller running up to 250 MHz, integrating 2 MB of Flash and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It is the tape-and-reel variant of the PIC32MZ2048EFH100-250I/PT, qualified for the industrial temperature range (-40C to +85C). A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals such as timers, communication interfaces, and analog blocks. The PIC32MZ EF family belongs to the higher tier of the PIC32 hierarchy, which itself sits within the broader 32-bit MCU market that includes ARM Cortex-M and RISC-V devices. PIC32MZ EF parts target high-performance embedded connectivity applications, offering hardware floating-point and DSP extensions. Key features include a MIPS Warrior M-class 32-bit core with IEEE 754-compliant FPU, four 64-bit accumulators with single-cycle MAC and saturating/fractional math support, four hardware USB ports (USB 2.0 high-speed OTG), a 10/100 Mbps Ethernet MAC, dual CAN modules, six UART/SPI/I2C ports, a parallel master port, and a graphics controller with EBI. The integrated crypto engine offers AES, DES, 3DES, SHA, MD5, and HMAC for secure connectivity applications. Architecturally, the device uses a 5-stage pipeline with dual-panel Flash for live firmware updates, dedicated DMA, and a 12-bit 5 MSPS ADC with up to 48 channels. The 252 MHz maximum core frequency delivers up to 415 DMIPS, while the FPU and DSP extensions enable real-time signal processing and complex math in motor control and audio pipelines. Typical applications include industrial automation controllers, IoT gateways with Ethernet and USB-HS, automotive infotainment prototypes, motor control drives, and graphical HMI panels. The wide connectivity set (USB-HS + Ethernet + CAN) makes it well suited to protocol bridges and remote telemetry units. When designing with this MCU, allocate a dedicated 2.5V internal LDO bypass cap, follow decoupling guidance in the family datasheet, and reserve pins for JTAG/trace to simplify firmware bring-up.

USD $7,55 En stock

PIC32MZ2048EFH100T-E/GJX

PIC32MZ2048EFH100T-E/GJX - 200MHz 32-bit MCU 2MB Flash TFBGA-100 | Microchip

The Microchip PIC32MZ2048EFH100T-E/GJX is a high-performance 32-bit microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class Warrior core running at 200 MHz (with a maximum capability of up to 252 MHz) and housed in a 100-pin TFBGA (7x7 mm) package. It integrates 2 MB of Flash and 512 KB of SRAM, and includes a hardware floating-point unit (FPU), DSP enhancements with single-cycle MAC, IEEE 754-compliant math, four 64-bit accumulators, and dual-panel Flash for live firmware updates. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, combining high computational throughput with on-chip peripherals such as timers, ADCs, communication interfaces, and memory. The PIC32 family belongs to the broader class of microcontrollers within the integrated circuits (ICs) hierarchy: microcontroller -> embedded processor -> semiconductor device. The EF subfamily adds an FPU and DSP extensions, placing these parts between general-purpose MCUs and full DSP processors. Key features of this part include a 200 MHz core with up to 415 DMIPS performance, hardware FPU for fast single- and double-precision math, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, dual CAN 2.0b controllers, SQI (Serial Quad Interface) for high-speed external memory, a 12-bit ADC up to 5 MSPS, and multiple UART/SPI/I2C interfaces. The device supports up to 8 channels of DMA, parallel graphics port for HMI applications, and JTAG/ICSP debug interfaces. Typical applications include industrial connectivity gateways, IoT edge nodes, automotive HMI displays (AEC-Q100 qualified), motor control (BLDC/PMSM), and graphical user interfaces with TFT LCD panels. The wide peripheral mix and high Flash/RAM capacity make it well-suited for protocol conversion, secure boot, and complex real-time control loops. When designing with the PIC32MZ EF, plan the PCB layout for the TFBGA-100 7x7 mm footprint using microvia technology and 0.5 mm pitch escape routing. The high 200 MHz operation requires careful power-rail decoupling with 100 nF plus bulk capacitors on each VDD pin pair, and VREF+ filtering for ADC accuracy. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical thermal and PCB layout guidance that is not consolidated in the manufacturer datasheet.

USD $7,11 En stock

PIC32MZ2048EFH100T-I/GJX

PIC32MZ2048EFH100T-I/GJX - 200MHz 2MB Flash MCU | Microchip 100-TFBGA

The Microchip Technology PIC32MZ2048EFH100T-I/GJX is a 32-bit MIPS MCU from the PIC32MZ EF family, integrating a MIPS32 M-class Warrior core running at 200 MHz with 2 MB dual-panel Flash and 512 KB SRAM in a 7x7 mm 100-ball TFBGA package. It provides USB-HS, 10/100 Ethernet MAC, dual CAN, SQI, and a 12-bit 18-channel ADC alongside six UART, four SPI, and four I2C peripherals. The -I suffix designates the industrial -40C to +85C temperature grade, and the /GJX suffix identifies the TFBGA-100 (7x7 mm) package with tape-and-reel delivery. An MCU (microcontroller) is a single-chip computer containing a processor core, program memory, data memory, and a rich set of peripherals designed for embedded control. The PIC32MZ EF family belongs to the MIPS32 M-class Warrior architecture hierarchy, positioned between Microchip's PIC32MX and Cortex-M class competitors in performance. Within power management, it functions as the supervisory and computation node that drives GPIOs, manages communication stacks, and orchestrates sensors. The PIC32MZ EF family targets Industrial, automotive, IoT, Graphics/HMI and Motor Control market segments per Microchip's product page. Key features include 415 DMIPS at 252 MHz peak core performance (200 MHz in I-grade), 32 KB instruction cache, DSP-enhanced core with four 64-bit accumulators and single-cycle MAC with saturating and fractional math, IEEE 754-compliant FPU, dual-panel Flash supporting live update, and hardware crypto accelerators. The 12-bit ADC reaches 500 ksps with up to 18 analog channels. An integrated high-speed USB 2.0 PHY and 10/100 Ethernet MAC reduce BOM and PCB area. The PIC32MZ EF architecture pairs a 5-stage pipeline MIPS core with tightly-coupled SRAM, achieving 3.28 CoreMark/MHz and full deterministic interrupt latency. The dual-panel Flash layout enables concurrent firmware updates without service interruption, and the integrated crypto engine supports AES, SHA, DES/3DES, and true random number generation suitable for secure boot and TLS offload. Typical applications include industrial IoT gateways with Ethernet and USB-HS connectivity, automotive HMI graphics clusters, multi-axis motor control FOC drives, point-of-sale terminals, and medical patient monitors requiring deterministic real-time response. The 100-TFBGA package suits compact, reflow-compatible modules. When designing with this MCU, allocate sufficient decoupling (4.7 uF + 0.1 uF per VDD/VSS pair) and a low-impedance trace geometry to the 12-bit ADC reference inputs to preserve SNR; the high-speed ADC and Ethernet PHY are sensitive to power-rail noise.

USD $4,05 En stock

PIC32MZ2048EFH100T-I/PF

PIC32MZ2048EFH100T-I/PF - 200MHz, 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048EFH100T-I/PF is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) package. It integrates a Floating Point Unit (FPU), HS USB, 10/100 Ethernet MAC, CAN 2.0b, and advanced analog peripherals, targeting connectivity-rich embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of on-chip peripherals such as timers, communication interfaces, and ADCs. Within the embedded hierarchy it sits above simple digital logic and below full application processors: MCU -> 32-bit microcontroller -> MIPS32 architecture -> PIC32 family -> PIC32MZ EF family. The PIC32MZ EF family is engineered for connectivity applications including industrial automation, IoT gateways, graphics HMI, automotive driver assistance, and motor control. Key features include 2 MB dual-panel Live-Update Flash, 512 KB SRAM, hardware FPU for IEEE-754 single and double precision operations, a 200 MHz core / 252 MHz maximum, dedicated crypto accelerator variants, HS USB 2.0 with on-chip PHY, 10/100 Mbps Ethernet MAC with 1588 timestamps, dual CAN 2.0b controllers, SQI (Serial Quad Interface) for external serial Flash, and a 12-bit 18 MSPS ADC with up to 48 analog inputs on 100-pin packages. Debug support is provided through a 4-wire MIPS Trace port plus JTAG. Architecturally, the device uses a 5-stage MIPS32 pipeline with hardware multiply/divide and dual-issue DSP extensions. The peripheral set is interconnected via a multi-layer AHB/APB bus matrix that allows simultaneous DMA-driven I/O and CPU execution without contention, an important advantage in real-time connectivity stacks such as TCP/IP plus CAN plus USB concurrently. Typical applications include industrial IoT gateways running TCP/IP stacks, automotive infotainment and body controllers, HMI panels with graphics and touch, BLDC and PMSM motor drives with field-oriented control, and medical instrumentation requiring deterministic Ethernet or USB connectivity. The 100-pin TQFP package provides generous I/O count for multi-bus designs. When designing with this part, allocate the Live-Update Flash regions carefully: the upper panel must be programmed before the lower panel can be updated in field, and the FPU latency should be considered in interrupt service routines. The HS USB PHY requires a precise 48 MHz reference from the on-chip PLL, so external crystal selection around 12 MHz is recommended for USB-stable designs. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes not collected in a single place in the manufacturer datasheet.

USD $9,47 En stock

PIC32MZ2048EFH100T-I/PT

PIC32MZ2048EFH100T-I/PT - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ2048EFH100T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller featuring a 200 MHz core, 2 MB of Flash, and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package. The "T" suffix denotes Tape & Reel packaging while "I" indicates the industrial -40C to +85C temperature grade, and the part runs from a 2.3V to 3.6V supply. The part integrates a hardware floating-point unit (FPU), HS USB 2.0, 10/100 Ethernet MAC, CAN, SQI, and a 12-bit ADC targeting industrial, automotive, IoT, HMI/graphics, and motor-control applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals into one package. Within the broader taxonomy, 32-bit MCUs belong to the embedded microcontroller family, which sits beneath microprocessors and above 8-/16-bit MCUs in capability. The PIC32MZ EF family specifically targets high-performance connectivity applications where ARM Cortex-M alternatives such as STM32F4/F7 or NXP i.MX RT often compete. Choosing a 32-bit MIPS core offers deterministic interrupt latency, mature MPLAB Harmony tooling, and Microchip's MPLAB ecosystem. Key features of the PIC32MZ2048EFH100T-I/PT include 2 MB dual-bank Live-Update Flash for in-field firmware upgrades, 512 KB SRAM, the MIPS32 M-class core with FPU delivering up to 252 MHz in related variants, four I2C, four SPI, six UART, an HS USB 2.0 PHY, an integrated Ethernet MAC with RMII/MII, two CAN 2.0b modules, and a 12-bit 1.2 Msps ADC with up to 48 channels. The 100-pin TQFP package exposes rich peripheral remapping and shadow-register free context switching for deterministic real-time response. Architecturally, the PIC32MZ EF core pairs a 5-stage MIPS pipeline with a tightly-coupled prefetch module, a 4-way set-associative cache, and the MIPS DSP ASE plus the microMIPS code-density instruction set. The Live-Update dual-bank Flash and shadow register file minimize interrupt jitter, which matters in motor-control and USB audio loops. Typical applications include industrial PLC and motor-control boards, USB host/device peripherals, Ethernet-connected IoT gateways, automotive HMI clusters, and graphics/HMI TFT panels. The 100-pin TQFP footprint is a common Microchip migration target for designs starting on smaller PIC32 packages. A practical design consideration: route the HS USB DP/DM pair as a 90-ohm differential with a clean ground, keep the 12 MHz crystal traces short, and respect the 2.3V to 3.6V supply range; exceeding 3.6V will damage the device. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MZ EF family, and practical design notes beyond the manufacturer datasheet.

USD $11,85 En stock

PIC32MZ2048EFH124-E/TL

PIC32MZ2048EFH124-E/TL - 32-bit MCU 200MHz 2MB Flash 124-VTLA

The Microchip Technology PIC32MZ2048EFH124-E/TL is a 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 2 MB Flash and 512 KB SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package with exposed thermal pad. The device delivers 97 programmable I/O lines, a Hi-Speed USB 2.0 OTG controller, a 10/100 Ethernet MAC, dual CAN 2.0b ports, a Quad-SPI (SQI) flash interface, and a 12-bit 5 MSPS ADC with up to 48 input channels. What is a 32-bit MCU? A microcontroller unit (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (RAM), and peripherals such as timers, ADC/DAC, communication controllers and GPIO. The PIC32MZ EF family sits in the upper-mid range of the PIC32 line: 32-bit core -> MIPS32 M-Class architecture -> 32-bit MCU -> embedded processor -> semiconductor. These parts target connectivity-rich industrial, IoT, automotive, and graphics-HMI designs where on-chip peripherals and determinism matter more than absolute MHz. Key features include an FPU, DSP enhancements, a dedicated crypto engine is intentionally absent in this variant (the part number suffix No Crypto confirms), 8 KB instruction cache, 4 KB write-back data cache, and a peripheral pin-select (PPS) matrix. The device supports up to 200 MHz CPU clock with 83 DMIPS core performance and integrates a true random number generator (TRNG), multiple I2C/SPI/UART ports, and a parallel master port for external bus expansion. The architecture uses a 5-stage pipeline MIPS32 M4K-class core with DSP ASE and hardware MAC, executing most instructions in a single cycle. Memory is partitioned with 2 MB dual-bank Flash (live update capable), 512 KB SRAM, and dedicated boot Flash. The supply rail is 3.3 V with internal LDO and on-chip voltage regulation, simplifying power-tree design across industrial 24V-derived systems. Typical applications include industrial Ethernet gateways, automotive body and HMI modules, IoT edge nodes with TLS acceleration (using the crypto engine of related EF parts), and graphical touch displays. Designers choose this device when they need 2 MB of on-chip Flash for full-featured protocol stacks plus a connectivity-rich peripheral set on a single die. When designing with the PIC32MZ2048EFH124-E/TL, respect the 124-VTLA package's thermal resistance (theta_JA approximately 19 C/W on a 4-layer JEDEC JESD51-7 9x9 cm board with thermal vias) and decouple every VDD/AVDD pair with 100 nF plus 4.7 uF bulk. Leave the exposed pad soldered to a continuous ground plane; floating the EP will elevate junction temperature and degrade ADC linearity. Use the internal FRC as backup only during development; production firmware should calibrate the POSC with the FPLL to within +/- 50 ppm for Ethernet and CAN. This page synthesizes distributor pricing, drop-in VTLA-124 alternatives, application context, and design notes not found in a single Microchip datasheet - engineered to help sourcing teams and firmware engineers shorten the design-in cycle.

USD $10,50 En stock

PIC32MZ2048EFH124-I/TL

PIC32MZ2048EFH124-I/TL - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2048EFH124-I/TL is a 32-bit MIPS32 M-Class PIC32MZ EF microcontroller integrating 2 MB of Flash and 512 KB of SRAM, operating at up to 200 MHz on a 3.3 V supply, in a 124-pin VTLA (9x9 mm) surface-mount package with an exposed thermal pad. The device is offered in the industrial -40C to +85C temperature grade and is supplied in tube packaging. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-throughput CPU core, on-chip Flash program memory, SRAM data memory, and a rich set of digital and analog peripherals into a single IC. The PIC32MZ EF family sits within Microchip's high-end PIC32 portfolio, targeting connectivity-rich applications. In the broader taxonomy it falls under MCU -> 32-bit MCU -> MIPS32 -> PIC32MZ EF family, designed for industrial, IoT, graphics/HMI, motor control, and automotive (with the -Q1 / -E qualified variants) markets. Key features include a hardware multiply/divide pipeline, a 12-bit ADC with up to 2 MSPS, multiple connectivity peripherals (Ethernet, CAN, USB OTG, SPI, I2C, UART), a graphics-friendly parallel master port, and 97 general-purpose I/O pins. The 2 MB Flash and 512 KB SRAM allow complex TCP/IP stacks, graphics framebuffers, and protocol buffers to be held entirely on-chip. The device supports MIPS16e code compression and a prefetch cache to maximize instruction throughput. On the architecture side, the MIPS32 M-Class core pairs a 5-stage pipeline with branch prediction and a tightly-coupled SRAM interface. The 124-pin VTLA package exposes the parallel master port (PMP) and dedicated high-speed peripherals needed for HMI displays, while the dual-row leadframe and exposed pad keep the thermal resistance low enough for full-speed industrial operation without forced airflow. Typical applications include industrial Ethernet gateways, IoT edge nodes, HMI panels, motor-control daughter boards, USB device/host bridges, and secure connected sensors. The wide Flash budget also makes it suitable for OTA (over-the-air) firmware update designs that must keep two application images resident. For a related companion solution see the PIC32MZ EF starter kit reference design, which uses this part with the Ethernet and USB segments enabled. When designing with this part, ensure the 3.3 V rail is well decoupled (1uF + 0.1uF at each VDDCORE/VDDIO pin) and that the exposed thermal pad is soldered to a continuous ground copper pour. Industrial users planning a long-lifecycle design should evaluate the AEC-Q100-qualified -E/TL temperature grade variant.

USD $9,20 En stock

Subcategorías

Productos (32725)