Circuitos integrados

XC7A15T-1FTG256I

XC7A15T-1FTG256I - 16,640-Cell Artix-7 FPGA | AMD

The AMD XC7A15T-1FTG256I is an Artix-7 field-programmable gate array with 16,640 logic cells, 170 I/O, a 464 MHz operating frequency, and a 256-ball FTBGA package. Designed for the industrial temperature grade, it combines programmable logic, DSP processing, PLL and MMCM clocking, and analog mixed-signal resources in a cost-optimized FPGA platform. The device operates from a 950 mV to 1.05 V core supply range. An FPGA is a semiconductor whose digital and mixed-signal functions are defined by a downloadable configuration. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor, while Artix-7 is AMD's low-cost, low-power FPGA family. This positioning makes the XC7A15T useful where designers need flexible parallel processing, interface adaptation, control logic, or DSP without developing fixed-function silicon. The 16,640-cell Artix-7 fabric provides the core implementation capacity, while 170 I/Os support connections to external memories, converters, sensors, displays, and communications equipment. The listed 464 MHz figure establishes the device's advertised operating-frequency class. Integrated DSP, PLL, and MMCM resources reduce the need for separate clock-generation or arithmetic components when the required functions fit within the FPGA fabric. The -1 portion identifies the speed grade, FTG256 identifies the 256-ball package, and the final I indicates the industrial temperature grade. Verified distributor information identifies an industrial-temperature variant with the same logic density and package. Its 950 mV to 1.05 V supply range is important during power-supply design because the core, auxiliary rails, I/O standards, and configuration system must be planned together rather than treated as a single fixed-voltage domain. Typical uses include industrial automation and control, communications interface consolidation, sensor and instrumentation systems, video-processing pipelines, and low-cost embedded DSP. These application descriptions are consistent with the Artix-7 family's stated combination of programmable logic, DSP processing, clock management, and analog mixed-signal integration. For a new board, the FTG256 footprint requires a dense ball-layout PCB, careful power-plane design, and careful separation of sensitive analog or clock paths. For an existing design, migration requires checking the exact package pinout, supported I/O standards, configuration interface, power rails, timing constraints, and installed Vivado or another supported AMD implementation tool. This page consolidates verified distributor specifications, package and pinout resources, same-family drop-in candidates, practical design guidance, and a parameter comparison to support component selection and procurement. It does not substitute for the complete Artix-7 data sheet, package files, and design-tool timing reports.

Cotización Contacto

XC7A15T-2FTG256C

XC7A15T-2FTG256C - 16,640 LEs Artix-7 FPGA | AMD

AMD XC7A15T-2FTG256C is an Artix-7 field-programmable gate array with 16,640 logic cells, 170 I/O, 921,600 RAM bits, and a 256-LBGA package. The -2 speed grade is intended for cost-sensitive, power-efficient designs requiring a balanced combination of programmable logic, DSP processing capability, and high-speed serial connectivity. It operates across the commercial temperature range of 0°C to +85°C and is available from distributors as a 256-LBGA FPGA. An FPGA is a reconfigurable digital semiconductor in which the logic, interconnections, and processing resources are configured after manufacture. Within the product hierarchy, the XC7A15T belongs to the Artix-7 FPGA family and combines a programmable logic array, block RAM, DSP resources, and general-purpose input/output blocks in one device. This integration allows designers to implement parallel data processing, control logic, protocol bridging, and interface functions on a single programmable chip. The principal verified device figures are 16,640 logic cells, 921,600 RAM bits, 170 I/O, and a 256-LBGA package. The -2 designation identifies its performance grade within the Artix-7 family. Its low-cost and power-efficient positioning makes it relevant to industrial automation, machine vision, telecommunications infrastructure, protocol conversion, baseband processing, wireless backhaul, and embedded control systems. The 256-LBGA package also supports compact, high-density board layouts. Technically, the device combines programmable logic fabric with dedicated memory and DSP blocks, allowing multiple data paths to be processed concurrently. The large 170-I/O count provides substantial connectivity for external memory, sensors, network transceivers, display interfaces, and control peripherals. Its 921,600 RAM bits support buffering and data storage within the FPGA fabric, while the dedicated DSP capability enables fixed-point filtering, transform, and signal-processing functions without requiring separate accelerators. Typical implementations place the FPGA beside high-speed transceivers, external memory, clock sources, and application-specific peripherals. Machine-vision designs can parallelize image acquisition and filtering, telecom equipment can perform line-card adaptation or protocol bridging, and industrial controllers can combine sensor acquisition with deterministic logic. Because FPGA resources are configurable, the same family can support multiple product variants without changing the PCB footprint when device density and speed-grade requirements permit. Designers should review the manufacturer Artix-7 datasheet and package pinout files before assigning bank voltages, clock pins, high-speed serial pins, and power rails. Decoupling, PCB return paths, thermal management, configuration interface access, and proper I/O standard selection are critical to reliable implementation. Although the 256-LBGA offers high I/O density, its fine-pitch routing and power-delivery requirements demand careful constraint-driven layout and multilayer PCB planning. This product data combines verified distributor pricing, Artix-7 family specifications, package information, and practical engineering guidance. It also distinguishes true same-package drop-in options from broader functional FPGA alternatives, helping engineers shortlist a device while still validating timing, power, configuration, and lifecycle requirements against the official AMD documentation.

Cotización Contacto

XC7A15T-3FTG256E

XC7A15T-3FTG256E - 16,640 Logic Cells, 170 I/O | AMD

AMD XC7A15T-3FTG256E is an Artix-7 field-programmable gate array with 16,640 logic cells, 921,600 RAM bits, 170 I/O, and a 1 V operating voltage, housed in a 256-pin FTG256 ball grid array package. The -3 speed grade targets higher-performance designs, while the E suffix identifies the extended-temperature option. Built on 28 nm FPGA technology, this device combines programmable logic resources with embedded block RAM, programmable I/O, and configurable interface functionality. A field-programmable gate array, or FPGA, is a semiconductor whose logic, interconnect, memory, and I/O resources can be configured after manufacture. Within the product hierarchy, the XC7A15T belongs to the Artix-7 FPGA family and the broader programmable-logic semiconductor category. Its 16,640 logic cells provide moderate implementation capacity for embedded control, signal processing, communications, instrumentation, and general-purpose programmable systems. The verified device data identifies 921,600 RAM bits for embedded memory and 170 user I/O. Cross-reference material describes the device using either 2,600 logic blocks or 1,300 LAB/CLB groupings, reflecting different counting conventions for the same 16,640-logic-cell device. The target operates from a 1 V core supply, enabling the energy-efficient 28 nm architecture associated with the Artix-7 family. The FTG256 package uses 256 BGA sites and is intended for surface-mount PCB assembly. BGA construction supports compact designs but requires careful escape-routing, ground-plane continuity, via-in-pad considerations where appropriate, and assembly process control. AMD package pinout resources are available for board-layout validation, while the complete electrical and timing limits must be taken from the manufacturer data sheet. Typical uses include industrial automation, test and measurement, embedded video and control, low-cost communications equipment, sensor processing, and education or prototyping platforms. The 170 I/O make it especially relevant to designs needing multiple parallel digital interfaces while retaining substantial programmable logic capacity. Designers should verify power sequencing, decoupling, signal integrity, configuration interface requirements, and exposed thermal behavior against the manufacturer documentation. Migration candidates must be checked for package, speed grade, temperature range, configuration scheme, bank voltage, and pinout rather than relying on the XC7A15T family name alone. This product page consolidates verified distributor specifications, package and pinout resources, source links, and same-package migration options. It also distinguishes directly comparable speed and temperature variants from different-package devices that cannot be treated as drop-in replacements.

Cotización Contacto

XC7A200T-1FBG484I

XC7A200T-1FBG484I - 740K Logic Cells FPGA | AMD Xilinx

The AMD Xilinx XC7A200T-1FBG484I is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215K logic slices, and 13 Mb of block RAM in a 484-ball FBGA package. It operates from 0.95V to 1.05V core voltage and supports up to 285 user I/O pins with multiple I/O standards including LVCMOS, LVDS, and HSTL. The device features 740 DSP48E1 slices for high-speed digital signal processing and 10 clock management tiles (CMTs) for robust clock generation and distribution. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that can be configured after manufacturing to implement custom digital circuits. FPGAs sit between ASICs (application-specific integrated circuits) and microprocessors in the design hierarchy, offering the flexibility of software-defined hardware with the parallelism of dedicated logic. The Artix-7 family is optimized for cost-sensitive, high-volume applications requiring high logic density and low power, positioned below the Kintex-7 and Virtex-7 families in AMD's 7-series portfolio. Key features include 285 user I/O pins supporting up to 1.25 Gbps LVDS, 740 DSP48E1 slices with 25x18 multiplier capability, and 10 CMTs providing PLL and MMCM functions. The device also offers 13 Mb of block RAM organized as 365 36Kb blocks, enabling substantial on-chip data storage. The -1 speed grade provides balanced performance with 550 MHz maximum clock frequency, while the industrial temperature range (-40C to +100C) ensures reliable operation in harsh environments. The XC7A200T-1FBG484I is built on AMD's 28nm high-k metal gate (HKMG) process technology, delivering high performance with low static power. The architecture includes configurable logic blocks (CLBs) with 6-input look-up tables (LUTs), dedicated carry chains for arithmetic functions, and shift register capabilities. The device supports partial reconfiguration, allowing dynamic updates to logic functions without full device reprogramming, which is valuable for adaptive systems. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high DSP count and low-latency I/O make it ideal for real-time signal processing in communications and defense systems. The 484-ball FBGA package with 1.0mm ball pitch enables compact PCB designs while providing adequate thermal dissipation for moderate power levels. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails (VCCINT, VCCAUX, VCCO) and follow AMD's PCB design guidelines for high-speed I/O. The configuration interface supports multiple modes including JTAG, SPI, and SelectMAP, allowing flexible system integration. Power sequencing must follow the recommended ramp rates to avoid latch-up or configuration failures.

Cotización Contacto

XC7A200T-1FBG676I

XC7A200T-1FBG676I - 740K Logic Cells FPGA | AMD Xilinx | FBG676

The AMD Xilinx XC7A200T-1FBG676I is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215,360 logic slices, and 13,140 Kb of Block RAM in a 676-ball FCBGA (FBG676) package. It operates with a core voltage of 1.0V and supports I/O standards up to 3.3V, making it suitable for a wide range of high-speed digital designs. Data verified as of 2026-08-05. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, offering reconfigurable logic blocks and programmable interconnects. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are a subset of digital integrated circuits. They provide a flexible alternative to ASICs, enabling rapid prototyping and hardware acceleration without the high NRE costs of custom silicon. Key features include 740K logic cells, 365 DSP48E1 slices, 10.5 Mb of distributed RAM, and 13,140 Kb of Block RAM. The device supports up to 400 I/O pins with SelectIO technology, offering programmable I/O standards and speeds. It also includes integrated PCIe blocks, Gigabit Transceivers (GTX) for high-speed serial communication, and a XADC for analog-to-digital conversion, providing a comprehensive platform for complex digital systems. The Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, balancing performance and power efficiency. The device features a configurable logic block (CLB) structure with 6-input LUTs, dedicated carry chains, and flip-flops, enabling efficient implementation of complex logic functions. The DSP48E1 slices support high-speed arithmetic operations, while the Block RAM provides on-chip storage for data buffering and FIFO implementations. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high logic density and DSP resources make it ideal for signal processing tasks, while the transceivers enable high-speed data communication in networking and broadcast equipment. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and the 676-ball BGA package demands a multi-layer PCB with adequate thermal vias for heat dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the AMD datasheet.

Cotización Contacto

XC7A200T-2FBG484C

XC7A200T-2FBG484C - Artix-7 FPGA 740K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG484C is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215K logic slices, and 13 Mb of block RAM in a 484-ball FBGA package. It operates with a core voltage of 1.0V and supports I/O standards from 1.2V to 3.3V, making it suitable for a wide range of applications. Data verified as of 2026-08-04. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. It consists of programmable logic blocks, configurable interconnects, and I/O blocks, allowing for flexible implementation of digital circuits. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the semiconductor industry. They are used in applications requiring parallel processing, high-speed I/O, and reconfigurable logic, such as communications, industrial automation, and aerospace. Key features of the XC7A200T-2FBG484C include 740K logic cells, 215K logic slices, 13 Mb of block RAM, 740 DSP slices, and 10.3 Mb of distributed RAM. It also features 16 GTX transceivers supporting up to 6.6 Gbps, 10 clock management tiles (CMTs), and 285 user I/O pins. The device supports multiple I/O standards including LVCMOS, LVDS, and HSTL, and includes hardened memory controllers for DDR3 and DDR4. The Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, offering a balance of performance, power, and cost. The device includes advanced clocking resources, such as PLLs and MMCMs, and supports partial reconfiguration for dynamic logic updates. The 484-ball FBGA package provides a compact footprint with excellent thermal and electrical characteristics, enabling high-density designs. Typical applications include software-defined radio (SDR), medical imaging, motor control, and high-performance computing. The high logic density and DSP slices make it ideal for signal processing, while the GTX transceivers support high-speed serial communication in networking and video applications. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a proper power-up sequence. Use the Xilinx Power Estimator (XPE) to calculate power consumption and design an appropriate thermal solution. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the AMD Xilinx datasheet, providing a comprehensive resource for engineers.

Cotización Contacto

XC7A200T-2FBG484I

XC7A200T-2FBG484I - Artix-7 FPGA 215K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG484I is a high-performance Artix-7 family FPGA featuring 215,360 logic cells, 16,825 CLBs, and 13,455,360 bits of Block RAM, packaged in a 484-ball FBGA (FBG484) with a -2 speed grade and industrial temperature range (-40°C to +100°C). It delivers 285 user I/O pins, making it ideal for high-bandwidth signal processing and connectivity applications. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that can be configured after manufacturing to implement custom digital circuits. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the application-specific integrated circuit (ASIC) family, but offer reconfigurability that ASICs lack. The Artix-7 family is positioned as a mid-range FPGA optimized for cost-sensitive, high-volume applications requiring high-speed transceivers and DSP capabilities. Key features include 740 DSP48E1 slices for high-throughput digital signal processing, 16 high-speed transceivers supporting up to 6.6 Gb/s, and 285 I/O pins with support for multiple I/O standards including LVCMOS, LVDS, and HSTL. The device also integrates a PCIe Gen2 block, 10/100/1000 Ethernet MACs, and an analog-to-digital converter (XADC) for system monitoring. The -2 speed grade provides balanced performance for logic and I/O, while the industrial temperature range ensures reliable operation in harsh environments. Architecturally, the XC7A200T is built on the 28nm high-k metal gate (HKMG) process, offering a 50% lower power footprint compared to previous generations. The configurable logic blocks (CLBs) contain 6-input look-up tables (LUTs) and dual flip-flops, enabling efficient implementation of complex logic functions. The device supports partial reconfiguration, allowing dynamic updates to specific regions without disrupting the entire design. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high transceiver count and DSP resources make it particularly suited for communications infrastructure, such as LTE/5G base stations and network switches, where high-speed serial links and parallel processing are essential. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple voltage rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and the FBG484 package has a thermal resistance of 8.4°C/W (theta_JA) that necessitates adequate airflow or heatsinking for high-utilization designs.

Cotización Contacto

XC7A200T-2FBG676C

XC7A200T-2FBG676C - 740K Logic Cells FPGA | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG676C is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215K logic slices, and 13 Mb of block RAM in a 676-ball FCBGA (FBG676) package. It operates with a core voltage of 1.0V and supports I/O standards including LVCMOS, LVDS, and HSTL across 400 user I/O pins. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and programmable interconnects that can be configured after manufacturing to implement any digital logic function. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are a subset of integrated circuits (ICs). Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, rapid iteration, and applications requiring in-field updates. The Artix-7 family is optimized for cost-sensitive, high-volume applications requiring high logic density and low power. Key features include 740K logic cells, 215K logic slices, 13 Mb of block RAM, 740 DSP slices, and 16 high-speed transceivers supporting up to 6.6 Gbps. The device also integrates a 12-bit 1 MSPS ADC (XADC) for on-chip temperature and voltage monitoring. The FBG676 package provides 400 user I/O pins with support for multiple I/O standards, enabling flexible board design. The XC7A200T-2FBG676C is built on the 28nm high-k metal gate (HKMG) process technology, balancing performance and power efficiency. The -2 speed grade offers a balance of performance and cost, with internal clock speeds up to 628 MHz. The device supports partial reconfiguration, allowing dynamic updates to specific logic regions without disrupting the entire design. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high logic density and DSP slices make it suitable for digital signal processing (DSP) tasks such as FFTs and filters, while the transceivers enable high-speed serial communication in networking equipment. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails (VCCINT, VCCAUX, VCCO) and follow the recommended power-up sequence. The configuration interface (JTAG, SPI, or BPI) must be carefully planned to support the required boot mode and update strategy.

Cotización Contacto

XC7A200T-2FBG676I

XC7A200T-2FBG676I - 740K Logic Cells FPGA | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG676I is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215,360 logic slices, and 13,140 Kb of Block RAM in a 676-ball FCBGA (FBG676) package. It operates with a core voltage of 1.0V and supports I/O standards including LVCMOS, LVDS, and HSTL, with up to 400 user I/O pins. The device is designed for high-bandwidth, low-power applications requiring substantial programmable logic and DSP resources. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that can be programmed after manufacturing to implement arbitrary digital logic functions. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the larger family of integrated circuits (ICs). Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, rapid iteration, and applications where requirements may evolve. The Artix-7 family is positioned as a mid-range FPGA balancing logic density, DSP capability, and power efficiency, bridging the gap between low-cost Spartan-7 and high-performance Kintex-7 devices. Key features of the XC7A200T-2FBG676I include 740 DSP48E1 slices for high-speed digital signal processing, 10.5 Mb of distributed RAM, and support for PCIe Gen2 x4 and 16 high-speed transceivers running at up to 6.6 Gb/s. The device also integrates a 12-bit 1 MSPS XADC for analog monitoring, and supports partial reconfiguration for dynamic logic updates. With a speed grade of -2, it offers balanced performance for a wide range of applications. Architecturally, the XC7A200T is built on a 28nm high-k metal gate (HKMG) process, providing a 50% power reduction compared to previous generations. The device features a flexible clocking architecture with 10 CMTs (Clock Management Tiles) and 32 global clock buffers, enabling complex multi-clock domain designs. The FBG676 package provides 676 balls with a 27mm x 27mm body, offering excellent thermal and electrical characteristics for high-density designs. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The device's high logic density and DSP resources make it suitable for implementing complex algorithms such as FFTs, filters, and image processing pipelines. Its transceiver capability supports high-speed serial protocols like PCIe, Gigabit Ethernet, and CPRI. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and a heatsink or active cooling is recommended for high-utilization designs. Use AMD's Vivado Design Suite for configuration and implementation, and refer to the Artix-7 FPGA Data Sheet (DS181) for detailed specifications.

Cotización Contacto

XC7A200T-2FFG1156I

XC7A200T-2FFG1156I - Artix-7 FPGA 215K Logic Cells | AMD

The AMD XC7A200T-2FFG1156I is a member of the Artix-7 FPGA family, offering a balance of high performance, low power, and cost efficiency for a wide range of applications. It features 215,360 logic cells, 500 user I/Os, and 13,455,360 block RAM bits, all in a 1156-ball FCBGA package. Operating from a 0.95V to 1.05V core voltage, this device is designed for systems requiring substantial programmable logic and I/O capability. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementations. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the semiconductor industry. They offer flexibility and parallel processing capabilities that are often superior to microprocessors for specific tasks, making them essential in prototyping, signal processing, and hardware acceleration. Key features of the XC7A200T-2FFG1156I include 740 DSP slices for high-speed digital signal processing, 10 clock management tiles (CMTs) with MMCM and PLL for robust clock generation, and support for MicroBlaze soft-core processors. The device also integrates analog-to-digital converters (XADC) for on-chip temperature and voltage monitoring. With a maximum operating frequency of 628 MHz, it delivers high performance for demanding logic designs. Built on 28nm technology, the Artix-7 family provides the highest performance-per-watt fabric in its class. The device supports various I/O standards, including LVCMOS, LVDS, and HSTL, and features high-speed transceivers for serial communication. The 1156-ball FCBGA package offers excellent thermal and electrical characteristics, enabling reliable operation in industrial temperature ranges (-40°C to +100°C). Typical applications include software-defined radio, motor control, medical imaging, and aerospace systems. The combination of logic density, DSP capability, and I/O flexibility makes it suitable for both prototyping and production deployments. Designers can leverage AMD's Vivado Design Suite for comprehensive development support. When designing with this FPGA, careful attention to power supply decoupling and thermal management is essential. The device requires multiple supply rails, and proper sequencing is critical to ensure reliable operation. Additionally, utilizing the on-chip XADC for monitoring can enhance system reliability.

Cotización Contacto

XC7A200T-2FGG484I

XC7A200T-2FGG484I - Artix-7 FPGA 215K Logic Cells | AMD

The AMD XC7A200T-2FGG484I is a high-performance Artix-7 Field Programmable Gate Array (FPGA) from the cost-optimized 28nm family, delivering the highest performance-per-watt fabric in its class. It features 215,360 logic cells, 16825 CLBs, and 13,455,360 bits of block RAM, packaged in a 484-ball Fine-Pitch Ball Grid Array (FBGA) with an industrial temperature range of -40°C to +100°C. This device operates from a nominal 1.0V core supply (0.95V to 1.05V) and supports up to 285 user I/O pins. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementation. FPGAs sit within the broader hierarchy of programmable logic devices, which are part of the semiconductor industry. Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, low-to-mid volume production, and applications requiring field updates. The Artix-7 family specifically targets cost-sensitive, high-volume applications where performance-per-watt and low power are critical. Key features of the XC7A200T-2FGG484I include 740 DSP slices for high-speed digital signal processing, 10 clock management tiles (CMTs) with MMCM and PLL, and support for various configuration interfaces including JTAG, SPI, and BPI. The -2 speed grade offers a balanced performance point, with the -3 being the highest performance and -1/-1LI/-2L optimized for lower static power. The device also integrates analog mixed-signal (AMS) blocks with a 12-bit 1MSPS ADC for on-chip monitoring. Technically, the Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, providing a significant leap in logic density and power efficiency over previous generations. The fabric includes 6-input look-up tables (LUTs), dedicated carry chains, and shift register logic, enabling efficient implementation of complex datapaths. The block RAM can be configured in various aspect ratios, and the DSP48E1 slices support 25x18 multiplication with 48-bit accumulation, ideal for filter and FFT implementations. Typical applications include software-defined radio, motor control, medical imaging, and industrial networking. The high I/O count and DSP resources make it suitable for video processing, high-speed data acquisition, and aerospace/defense systems requiring reconfigurable logic. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this device, careful attention must be paid to power supply decoupling, with multiple 1.0V core and 1.8V auxiliary rails requiring proper filtering. Configuration bitstream storage in external SPI flash is recommended for production, and the device supports partial reconfiguration for dynamic logic updates.

Cotización Contacto

XC7A200T-3FBG676I

XC7A200T-3FBG676I - Artix-7 FPGA, 740K Logic Cells | AMD

The AMD XC7A200T-3FBG676I is a high-performance Artix-7 family FPGA featuring 740K logic cells, 13.3 Mb of Block RAM, and 740 DSP slices in a 676-ball FCBGA package. It operates with a core voltage of 1.0V and supports I/O standards up to 3.3V. Data verified as of 2026-08-04. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs sit between ASICs (application-specific) and microprocessors (fixed instruction set) in the design hierarchy, offering reconfigurability and parallel processing. The Artix-7 family is optimized for high-performance, low-power applications, balancing logic density, DSP capability, and I/O flexibility. Key features include 740K logic cells, 13.3 Mb of Block RAM, 740 DSP slices, and support for PCIe Gen2, Gigabit transceivers, and DDR3 memory interfaces. The -3 speed grade provides the highest performance in the Artix-7 family, with 6.6 Gb/s transceivers and 550 MHz clocking. The industrial temperature grade (-I) supports operation from -40C to +100C, making it suitable for harsh environments. The XC7A200T-3FBG676I is built on 28nm process technology, offering a balance of performance and power efficiency. It includes hardened memory controllers for DDR3, and configurable logic blocks with 6-input LUTs. The device supports partial reconfiguration and has built-in analog-to-digital converter (XADC) for system monitoring. Typical applications include software-defined radio, medical imaging, industrial motor control, and high-performance computing acceleration. The high DSP count and transceiver speed make it ideal for signal processing and high-throughput data paths. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails and follow the recommended power-up sequence. The configuration bitstream can be stored in external SPI flash or loaded via JTAG. Thermal management is critical at high utilization; use the exposed pad and proper airflow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the AMD datasheet, providing a comprehensive resource for engineers evaluating the XC7A200T-3FBG676I.

Cotización Contacto

XC7A25T-1CPG238C

XC7A25T-1CPG238C - Artix-7 FPGA, 23K Logic Cells | AMD

The AMD XC7A25T-1CPG238C is a 28nm Artix-7 Field Programmable Gate Array (FPGA) delivering 23,360 logic cells with 1,658,880 system gates, housed in a 238-ball Low-Profile Fine-Pitch Ball Grid Array (LFBGA, CPG238) package. It integrates 112 user I/O banks, 1,658,880 system gates, and operates at speed grade -1 with commercial temperature grade (0C to +85C). The device targets high-performance, low-power, cost-sensitive applications where transceiver integration and DSP throughput matter. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit whose digital logic, routing, and I/O behavior are defined by a user-supplied configuration bitstream after manufacture. Within the broader programmable-logic taxonomy, FPGAs sit above CPLDs (less complex, non-volatile) and below ASICs (fully custom, non-programmable). The Artix-7 family is positioned for low-power and high DSP/logic throughput at 28nm, complementary to Kintex-7 (price-performance) and Virtex-7 (highest performance) within AMD's 7-series portfolio. Differentiating specifications for the XC7A25T include 1,658,880 system gates, 112 user I/O pins, and a -1 speed grade that balances timing margin versus the -2/-3 grades. The CPG238 package is one of AMD's small-footprint, low-cost BGA options for the Artix-7 family, optimized for the smallest PCB footprint while preserving full Artix-7 fabric features. The commercial temperature grade suits indoor, lab, and consumer environments. Typical applications span industrial motor control and machine vision, software-defined radio (SDR) front ends, low-cost video processing pipelines, embedded digital signal processing, and portable test & measurement instruments. Compared with Spartan-6, Artix-7 roughly doubles logic density per watt and adds higher-rate transceivers, making it a frequent upgrade path. The device is supported by AMD Vivado Design Suite and legacy ISE, with free WebPack editions supporting the XC7A25T device. When designing with the XC7A25T-1CPG238C, ensure the PCB has a BGA fan-out with matched-length impedance-controlled traces for high-speed transceiver signals. Decoupling must follow AMD's UG475 package guidelines, and the configuration mode (SPI flash, JTAG, or SelectMAP) should be finalized before schematic freeze because pin assignments differ per mode. Pricing as of 2026-10-11 reflects current distributor quotes.

Cotización Contacto

XC7A25T-1CPG238I

XC7A25T-1CPG238I - Artix-7 FPGA, 23K Logic Cells, 238-BGA | AMD

The AMD (Xilinx) XC7A25T-1CPG238I is an Artix-7 Field Programmable Gate Array (FPGA) IC delivering 23,360 logic cells and 112 user I/Os in a 238-ball CSPBGA (CPG) package. Built on TSMC's 28 nm HKMG process, the Artix-7 family targets cost-sensitive and power-conscious applications requiring high DSP throughput and modest transceiver capability. This specific variant is the -1 speed grade and the I (industrial) temperature grade, supporting operation across -40C to +100C ambient conditions. An FPGA (Field Programmable Gate Array) is a programmable logic device that combines configurable logic blocks, programmable interconnect, and dedicated silicon resources such as Block RAM, DSP slices, and high-speed transceivers. Within the broader taxonomy, FPGAs sit between ASICs (fixed-function, high NRE) and general-purpose microcontrollers; FPGAs offer hardware-level parallelism and are deployed when the design must be re-programmed in the field or when deterministic latency is required. The Artix-7 series specifically bridges mid-range Spartan-6 and high-end Kintex-7 devices, balancing logic density with low static power. Key features of the XC7A25T-1CPG238I include 23,360 logic cells (approximately 3,640 Logic Slices / 29,680 LUTs of fabric), 1,658,880 bits of Block RAM, 45 DSP48A1 slices for high-speed arithmetic, and integrated GTP serial transceivers supporting up to 6.6 Gb/s line rates. The device operates across an extended junction temperature range typical of industrial embedded systems. The 238-ball CSPBGA package uses a 10x10 mm footprint optimized for high-density PCB routing. Architecturally, the Artix-7 uses a 6-input LUT fabric with dedicated carry chains, distributed RAM in slices, and on-chip Block RAM tiles supporting true dual-port access. The 28 nm HKMG process delivers up to 50% lower static power versus the prior 40 nm Spartan-6 generation, making the A25T family attractive for portable, fan-cooled, or sealed industrial enclosures. Typical applications include industrial machine vision, motor control and robotics, medical imaging front-ends, software-defined radio baseband, low-cost serial connectivity bridges, and embedded vision processing pipelines. The device is supported by AMD Vivado Design Suite and the older ISE Design Suite, with free WebPack licenses covering the A25T. When designing with the XC7A25T-1CPG238I, allocate GTP transceiver and Block RAM usage early, as these dedicated resources dictate device utilization and timing closure. The 238-ball CSPBGA requires PCB substrate design with matched impedance for the GTP lanes and proper decoupling; this part uses Xilinx's standard 7-series configuration scheme, which enables drop-in migration between A35T, A50T, and A100T parts in the same package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

XC7A35T-1CPG236C

XC7A35T-1CPG236C - 35T Artix-7 FPGA | AMD | 106 I/O

The AMD XC7A35T-1CPG236C is an Artix-7 field-programmable gate array built on a 28 nm HPL process, with 33,280 logic cells, 1,843,200 block-RAM bits and 106 I/O in a 238-CSPBGA package. The -1 performance grade supports general-purpose programmable-logic applications requiring substantial parallel processing, embedded memory and DSP capability in a cost-conscious package. An FPGA is a semiconductor whose digital logic, interconnect and programmable I/O are configured after manufacture. The XC7A35T belongs to the Artix-7 FPGA hierarchy, combining configurable logic blocks, block RAM, DSP resources and programmable input/output in one device. This makes it useful when fixed-function controllers are insufficient but a smaller, lower-cost programmable-logic platform is appropriate. The device provides 106 I/O, 33,280 logic cells and 1,843,200 bits of block RAM. Its 28 nm HPL process supports an efficient balance between performance, density and power consumption. The CPG236 designation identifies a compact 238-ball CSPBGA package, allowing a high pin count and substantial device functionality within a relatively small board footprint. The XC7A35T platform is suited to parallel data acquisition, signal processing, embedded control, communications interfaces and custom accelerator logic. Its block RAM supports buffering and packet-oriented data paths, while programmable I/O allows board-specific interfaces to be implemented without relying on several discrete programmable logic devices. The exact DSP resources, voltage rails and timing limits must be confirmed in the manufacturer datasheet before a new design begins. Typical implementations include industrial data-acquisition modules, network interface controllers, video and image-processing pipelines, test equipment and low-cost embedded control systems. Because an FPGA requires a bitstream, power sequencing, configuration memory and careful I/O planning, it is best selected when workload parallelism or reconfigurability justifies the additional design effort. A key layout consideration is the 238-CSPBGA escape-routing requirement. The board should follow the AMD package pinout files, provide clean power and ground planes, and route configuration, clock, reset and differential I/O signals according to the family guidance. A full 238-pin schematic and layout review should be completed before fabrication. This page combines verified distributor availability and pricing with the Artix-7 package information, practical migration cautions, and a parameter comparison for practical procurement and engineering evaluation. Cross-manufacturer FPGA substitutions require complete tool, electrical, timing and pin-level validation rather than reliance on nominal resource counts alone.

Cotización Contacto

XC7A35T-1CS324I

XC7A35T-1CS324I - Artix-7 FPGA, 33K Logic Cells, 210 I/O, 324-BGA | AMD

The AMD (formerly Xilinx) XC7A35T-1CS324I is a member of the Artix-7 Field Programmable Gate Array (FPGA) family, providing 33,280 logic cells organized in 2,600 logic blocks plus 1,843,200 bits of block RAM, 90 DSP48 slices, and 4 high-speed GTP transceivers. Built on a 28nm high-k metal gate (HKMG) process, it is offered in a 324-ball Chip-Scale BGA (CSBGA / CSG324) package with 210 user I/Os and a -1 speed grade, industrial temperature rating. An Artix-7 FPGA is a programmable logic device that sits within the broader category of programmable logic ICs, alongside CPLDs and FPGAs from other families. FPGAs sit hierarchically below programmable logic, below semiconductor ICs, and below integrated circuits. Artix-7 specifically targets the industry's best performance-per-watt for cost-sensitive applications, balancing high-throughput DSP, high-speed serial connectivity, and low static power consumption in a low-cost package family. Key differentiating specifications include 33,280 logic cells (5,200 logic slices, 4 clock-management tiles), 1,843,200 bits of on-chip block RAM, 240 Kbits distributed RAM, 90 dedicated DSP48E1 slices running at up to 628 GigaMACs/s, and 4 GTP multi-gigabit transceivers supporting up to 6.6 Gb/s. The device supports up to 210 user I/Os across multiple voltage standards (LVCMOS, LVDS, SSTL) and a 12-bit 1 Msps XADC analog front end. Architecturally the chip is built around 28nm HKMG CMOS logic, configurable logic blocks (CLBs), 36 Kb dual-port BRAM blocks, and hard PCIe Gen2 endpoint blocks. Compared with prior Spartan-6 generations, Artix-7 delivers roughly 2x performance per watt and roughly 35% lower total power, enabling battery, fan-less, or thermally constrained designs without sacrificing DSP or serial bandwidth. Typical applications span cost-sensitive digital signal processing, motor control, industrial camera and machine-vision pipelines, software-defined radio front ends, low-cost PCIe endpoint cards, and low-power embedded video processing. The 4 GTP lanes and 90 DSP slices make this device especially attractive for thin client video transcoding, portable ultrasound, and IoT edge nodes. When designing with this part, plan for a 1.0V core, 1.8V/2.5V/3.3V auxiliary supplies, and configure the GTP reference clocks using the dedicated MGTREFCLK pins; do not remap them to GPIO at the schematic stage. JTAG and the SPI configuration interface both support multi-device daisy chains for board-level debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the bare manufacturer product page.

Cotización Contacto

XC7A35T-1CSG324C

XC7A35T-1CSG324C - Artix-7 FPGA, 33k Logic Cells, 324-BGA | AMD

The AMD Xilinx XC7A35T-1CSG324C is a member of the Artix-7 family of field-programmable gate arrays (FPGAs) built on a 28 nm process, offering 33280 logic cells, 1843200 system gates, and 210 user I/Os in a 324-ball Lid Flip-chip Ball Grid Array (CSG324 / 324-LFBGA, CSPBGA) package. It combines high performance per watt with a 1.0 V core supply and supports commercial (0 C to +85 C) ambient operation. An FPGA (Field-Programmable Gate Array) is a programmable logic device that contains configurable logic blocks, programmable interconnect, and I/O cells, allowing engineers to implement custom digital circuits, parallel processing pipelines, and hardware accelerators. FPGAs sit within the broader taxonomy of programmable logic devices (PLDs) -> programmable logic -> digital ICs -> semiconductors. The Artix-7 family targets cost-sensitive, high-volume applications requiring moderate logic density combined with low power consumption. Key features include 90 DSP48E1 slices for high-throughput fixed-point signal processing, 2.1 Mb of block RAM, 5 clock management tiles (CMTs) each containing one mixed-mode clock manager (MMCM) and one phase-locked loop (PLL), and integrated configuration logic supporting multi-boot and bitstream encryption. The Artix-7 architecture delivers up to 240 DSP GMACs at sub-watt power levels, making it well suited for power-constrained DSP and signal chain designs. The XC7A35T-1CSG324C features AMD Xilinx's proven 7-series transceiver-less fabric, where "35T" indicates the Artix-7 family with 33k logic cells, the "-1" speed grade reflects timing characteristics for industrial-grade applications, "CSG324" specifies the 324-ball FBGA lid package, and "C" denotes commercial temperature grade. The device exposes GTPs are absent from this device, but offers extensive SelectIO high-performance I/O supporting LVCMOS, LVTTL, SSTL, and HSTL standards up to 1.6 Gbps in some configurations. Typical applications include industrial motor control, medical imaging front-ends, software-defined radio (SDR) receivers, low-cost video processing pipelines, and portable test and measurement equipment. Designers favor the Artix-7 family for its balance of cost, density, and DSP capability in mid-range embedded designs. When migrating between Artix-7 densities, verify pinmap and clock routing using AMD's Pinout Files resource - higher-density parts like the XC7A50T and XC7A75T in the same CSG324 package are footprint-compatible. The XC7A35T's GTP transceivers are NOT available; for high-speed serial links consider migrating to Kintex-7 or Spartan-6 with GTP/GTX support. This page synthesizes distributor pricing, drop-in alternatives within the same CSG324 footprint, and practical design notes that extend beyond the manufacturer datasheet to support engineering decisions.

Cotización Contacto

XC7A35T-1FG484I

XC7A35T-1FG484I - Artix-7 FPGA 33K LEs, 484-BGA | AMD/Xilinx

The AMD/Xilinx XC7A35T-1FG484I is a member of the Artix-7 Field Programmable Gate Array (FPGA) family built on a 28nm CMOS process, offering 33,280 logic cells, 5,200 logic slices of 6-input LUTs, and 1,843,200 bits of block RAM in a 484-ball Flip-Chip BGA package rated for the industrial temperature range (-40C to +100C). An FPGA (Field Programmable Gate Array) is a reprogrammable semiconductor device whose logic fabric, interconnect, and I/O can be configured by the designer after manufacture, distinguishing it from fixed-function ASICs and microcontrollers. Within AMD's programmable-logic hierarchy it sits in the Artix-7 family below Kintex-7 and Virtex-7, optimized for cost-sensitive, low-power, high-volume serial connectivity such as PCIe Gen2 and GTP transceivers. The Artix-7 family itself is one tier inside AMD's broader Adaptive Compute portfolio, which now includes Versal ACAPs. Key headline parameters of the XC7A35T include 4 transceivers (GTP) capable of up to 3.75 Gbps, 90 DSP48 slices for high-throughput arithmetic, and 250 user I/O pins spread over 4 I/O banks supporting 1.2V to 3.3V single-ended standards plus LVDS pairs. Integrated hard IP includes a single PCIe Gen2 endpoint block and Configuration logic supporting 28 nm SelectIO primitives. The FPGA is implemented on a 28nm high-k metal-gate CMOS process providing static power roughly 50% lower than the prior 45nm Spartan-6 family while delivering up to 1.5x higher performance per watt. The -1 speed grade targets cost-optimized designs; -2 and -3 grades offer higher Fmax at additional cost. The Flip-Chip BGA-484 (FG484 / FGG484) package uses 1.0mm ball pitch and shares a common footprint with the XC7A50T and XC7A75T in the same family, easing design migration. Typical applications include low-cost PCIe endpoint boards, motor and motion control, video processing pipelines, industrial machine vision, software-defined radio front-ends, and portable medical imaging. Artix-7 transceivers and DSP slices make it well suited to any mid-density, low-power serial-link design. When designing with this device, pair it with Xilinx Vivado Design Suite for synthesis, place-and-route and bitstream generation, and use an AMD Xilinx JTAG programmer such as the Platform Cable USB II for configuration. Confirm junction temperature stays below 100C for the industrial-grade variant and ensure the PCB footprint accommodates the 1.0 mm-pitch BGA. This page synthesizes distributor pricing, drop-in alternatives within the same 484-FBGA footprint, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

XC7A35T-1FGG484I

XC7A35T-1FGG484I - Artix-7 FPGA, 250 I/O | AMD

The AMD XC7A35T-1FGG484I is an Artix-7 Field Programmable Gate Array (FPGA) from the 28nm Artix-7 family, offering 33,280 logic cells, 250 user I/Os, and 1,843,200 bits of block RAM in a 484-ball FBGA (23x23mm) package. It operates over the industrial temperature range of -40°C to +100°C (TJ) and is designed for cost-sensitive, high-volume applications requiring high performance-per-watt. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. Unlike fixed-function ASICs, FPGAs contain programmable logic blocks, configurable I/O, and routing resources that allow designers to implement complex digital systems in hardware. The Artix-7 family sits between the low-cost Spartan-7 and the higher-performance Kintex-7 in AMD's 7-series portfolio, targeting applications where cost and power efficiency are paramount. Key features of the XC7A35T-1FGG484I include 250 user I/O pins, 2,600 Configurable Logic Blocks (CLBs), 33,280 logic cells, and 1,843,200 total RAM bits. The device integrates five Clock Management Tiles (CMTs) with MMCM and PLL blocks for flexible clock generation, and supports multiple I/O standards including LVCMOS, LVDS, and HSTL. The 484-ball FBGA package provides a compact 23x23mm footprint with 0.8mm ball pitch, enabling dense PCB layouts. The Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process technology, delivering up to 50% lower power consumption compared to previous generations. The device supports partial reconfiguration, allowing dynamic updates to logic functions without powering down the system. With support for AMD Vivado Design Suite, designers can implement complex designs using a mature and comprehensive toolchain. Typical applications include industrial motor control, medical imaging, software-defined radio, video processing, and automotive driver assistance systems. The industrial temperature grade makes it suitable for harsh environments where reliability is critical. When designing with this device, ensure adequate decoupling capacitors on all power rails and follow the PCB layout guidelines in UG475 for the 484-FBGA package to maintain signal integrity.

Cotización Contacto

XC7A35T-1FT256I

XC7A35T-1FT256I - 33,280-Cell Artix-7 FPGA | AMD

AMD XC7A35T-1FT256I is an Artix-7 field-programmable gate array (FPGA) with 33,280 logic cells, 170 I/O, 90 DSP slices, and 1,800 Kb of block RAM in a 256-ball FTBGA package. The device targets 1 V operation and is identified as an industrial-temperature, -1 speed-grade device. According to the retrieved DigiKey and Mouser listings, it is the XC7A35T device in the 256-LBGA/FTBGA package format. An FPGA is a programmable digital integrated circuit in the semiconductor family of configurable logic devices. Artix-7 combines programmable logic fabric, block RAM, DSP resources, programmable I/O, and high-speed serial transceivers on one device. This hierarchy—Artix-7 → FPGA → programmable logic device → semiconductor—supports parallel logic, control, signal-processing, communications, and embedded-system designs without changing the physical device for a new bitstream. Key verified features include 33,280 logic cells, 170 I/O, 90 DSP slices, 1,800 Kb of block RAM, 28 nm technology, and a 1 V supply designation. The Artix-7 family is suited to compact industrial, communications, instrumentation, embedded control, and digital signal-processing systems. The verified snippets do not provide complete operating-temperature, transceiver, power, package-ball, and lifecycle details, so those values are not inferred here. The part number suffix identifies the important ordering configuration. The verified data identifies XC7A35T as the device family and the 1FT256I ordering code as the target MPN, while comparison data also identifies FTG256 package variants. Engineering equivalence must therefore be confirmed against the AMD package pinout files and UG475 rather than inferred from family naming alone. Typical applications include industrial control, communications, embedded processing, instrumentation, and DSP-assisted logic designs. In each case, the FPGA can implement parallel datapaths and control functions while using its block RAM for buffering and its DSP slices for arithmetic. The design should also account for configuration memory, clocking, banked supply rails, decoupling, signal integrity, thermal management, and programming support. For PCB implementation, place decoupling and configuration-support circuitry according to the verified AMD package data, maintain the required power and ground distribution, and route high-speed signals with controlled impedance and return paths. Do not substitute an XC7A35T variant solely because it has the same family name; verify package, speed grade, temperature grade, voltage options, pin compatibility, and the complete device identifier. This page combines the verified distributor identity, package and resource information, source links, and explicit data gaps to support engineering selection. It does not invent missing electrical limits, pricing, lifecycle claims, or pin assignments.

Cotización Contacto

XC7A35T-1FTG256C

XC7A35T-1FTG256C - Artix-7 FPGA, 33K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A35T-1FTG256C is an Artix-7 family Field Programmable Gate Array (FPGA) featuring 33,280 logic cells, 90 DSP slices, 1,800 Kb of block RAM, and 170 user I/Os, housed in a 256-ball FTBGA (FTG256) package measuring 17x17 mm with 1.0 mm ball pitch. Built on TSMC's 28 nm HPL (High-Performance, Low-Power) HKMG process technology, the device operates from a 0.95 V to 1.05 V core supply and supports commercial temperature grade 0C to +85C. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit whose digital logic, interconnect, and I/O behavior are configured by the user after manufacture via a hardware description language (HDL) bitstream. FPGAs sit in the broader taxonomy of programmable logic devices alongside CPLDs and are widely used for parallel DSP, custom I/O protocols, and rapid prototyping where ASIC NRE costs are unjustified. The Artix-7 family is positioned as the low-power, cost-optimized member of the Xilinx 7-Series, between the high-performance Virtex-7 and the lower-cost Spartan-6 predecessors. Key features include four GTP transceivers supporting up to 6.6 Gb/s line rates (artix-7 35T family), 5 MMCM/PLL clock management tiles, an integrated 12-bit 1 Msps XADC analog-to-digital converter, and on-chip configuration memory supporting multiple boot modes including SPI, BPI, JTAG, and Master/Slave SelectMAP. The Artix-7 35T variant specifically adds the 4 GTP serial transceivers that the smaller 15T and non-T parts omit. Typical applications include software-defined radio (SDR) leveraging the 90 DSP slices for high-performance modulation and filtering, machine vision and industrial imaging pipelines using parallel sensor interfaces, motor control and industrial drive firmware acceleration, low-cost serial connectivity bridges (PCIe Gen2 endpoint, SFP/QSFP via GTP), and portable/handheld test instrumentation where Artix-7's power efficiency at 100K-200K LUT scale is decisive. The 256-ball FTG256 package is the largest pin-count option for this family outside the 484-ball FBG484. When designing with this device, allocate at least 4 layers and 2 oz copper for power and ground planes to support the simultaneous-switching currents of 170 user I/Os. Decouple each GTP transceiver supply pin (MGTAVCC/MGTAVTT) with 0.1 uF and 4.7 uF ceramic capacitors placed within 5 mm of the BGA ball. Use Xilinx Vivado 2025.2 or later for synthesis and bitstream generation. This page synthesizes distributor pricing, drop-in Artix-7 35T alternatives in the same FTG256 footprint, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto

XC7A35T-1FTG256I

XC7A35T-1FTG256I - 33K Cell Artix-7 FPGA | AMD

AMD XC7A35T-1FTG256I is an Artix-7 field-programmable gate array with 33,280 logic cells, 170 I/Os, 90 DSP slices, and 1.84 Mb of block RAM, operating from 950 mV to 1.05 V in a 256-ball FTBGA package. The device uses 28 nm FPGA technology and is associated with a maximum clock rating of 464 MHz. It is designed for programmable logic, parallel processing, fixed-point signal processing, and embedded control systems where deterministic hardware parallelism is valuable. An FPGA is a reconfigurable semiconductor in the programmable-logic and digital-semiciconductor hierarchy. Unlike a fixed-function microcontroller or DSP, its lookup tables, routing fabric, block RAM, DSP slices, and I/O can be programmed after manufacture. The Artix-7 family combines this programmable architecture with high-speed serial links, analog mixed-signal resources, and a cost-optimized focus on performance per watt. Key features include 33,280 logic cells for combinational and sequential designs, 170 user I/Os for external interfaces, and 90 DSP slices for multiply and accumulate operations. The 1.84 Mb of block RAM provides dedicated on-chip storage, while the 950 mV to 1.05 V core-voltage range supports power-conscious FPGA configurations. Its 256-ball FTBGA package supports dense PCB routing but requires careful via, escape-routing, thermal, and assembly planning. The XC7A35T combines programmable logic, hard DSP blocks, block RAM, memory-mapped resources, and programmable I/O in one device. A 464 MHz associated timing rating provides a useful design target, although achievable system performance depends on the selected clocking resources, timing constraints, routing congestion, memory interfaces, I/O standards, and implemented design. Because the part is an FPGA, both hardware configuration and the device bitstream must be validated as a complete system. Typical uses include industrial control and automation, communications and protocol conversion, instrumentation, embedded video, digital signal processing, and low-power edge systems. The 170 I/Os and 90 DSP slices make the device particularly suitable for designs that combine sensor acquisition, control logic, and real-time arithmetic without relying on several separate programmable devices. The primary design consideration is package implementation. A 256-ball FTBGA demands fine-pitch escape routing, a qualified PCB stack-up, adequate thermal spreading, and assembly processes capable of handling the package geometry. Designers should also confirm the exact power, configuration, and clock requirements against the manufacturer Artix-7 documentation before releasing the schematic or layout. This page consolidates the verified distributor specifications, same-package Artix-7 alternatives, comparative engineering data, and practical implementation guidance. It is intended to help engineers identify the correct FPGA variant, evaluate replacement options, and plan a manufacturable 256-ball BGA design without treating non-identical family members as automatic drop-in replacements.

Cotización Contacto

XC7A35T-2CPG236I

XC7A35T-2CPG236I - Artix-7 FPGA 33280 Logic Cells | AMD

The AMD XC7A35T-2CPG236I is an Artix-7 Field Programmable Gate Array (FPGA) from the 7 series family, offering 33,280 logic cells, 2,600 Configurable Logic Blocks (CLBs)/LABs, and 106 user I/O pins. It is housed in a 238-ball LFBGA/CSPBGA package and operates from a 0.95V to 1.05V core supply voltage. This device is designed for low-cost, high-volume applications requiring a balance of logic capacity, DSP capability, and I/O flexibility. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the blocks to be wired together in different configurations. This reconfigurability makes FPGAs ideal for prototyping, low-to-mid volume production, and applications where design updates are expected. The Artix-7 family sits within the broader FPGA hierarchy, positioned as the low-power, low-cost member of the Xilinx 7 series, which also includes the higher-performance Kintex-7 and Virtex-7 families. Key features of the XC7A35T-2CPG236I include 1,843,200 total RAM bits, 106 user I/Os, and support for multiple clock management tiles (CMTs) with MMCM and PLL. The device is part of the Artix-7 series, which is optimized for the lowest power and cost at 28nm, delivering the highest performance-per-watt fabric and AMS integration in a low-cost FPGA. The -2 speed grade indicates a mid-range performance level, while the 'I' suffix denotes an industrial temperature range (-40°C to +100°C). Technically, the Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, providing a balance of logic density and power efficiency. The device includes dedicated DSP48E1 slices for signal processing, block RAM for data storage, and SelectIO technology supporting various I/O standards. The 238-ball CSPBGA package measures 17mm x 17mm with a 0.8mm ball pitch, enabling compact PCB designs. Typical applications include motor control, industrial networking, software-defined radio, and video/image processing. The 106 I/Os and 1.8Mbit of block RAM make it suitable for bridging, protocol conversion, and real-time control tasks. The industrial temperature range supports deployment in harsh environments. When designing with this FPGA, careful attention to power supply decoupling is essential. The core voltage (VCCINT) must be clean and stable within 0.95V to 1.05V, and multiple decoupling capacitors should be placed near the device pins to minimize noise and ensure reliable configuration.

Cotización Contacto

XC7A35T-2FGG484C

XC7A35T-2FGG484C - Artix-7 FPGA 33280 Cells | AMD

The AMD XC7A35T-2FGG484C is a member of the Artix-7 FPGA family, built on a 28nm process. It features 33,280 logic cells, 250 user I/Os, and 1,843,200 bits of block RAM, all housed in a 484-ball FBGA package. This device is designed for cost-sensitive, high-volume applications that require a balance of logic density, performance, and low power consumption. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs are part of the broader category of programmable logic devices, which also includes CPLDs. They are used in a wide range of applications where flexibility, parallel processing, and rapid prototyping are needed, from industrial motor control to communications infrastructure. Key features of the XC7A35T-2FGG484C include 250 user I/Os, 33,280 logic cells, and 1,843,200 bits of block RAM. The -2 speed grade offers a balance between performance and power, making it suitable for many mid-range applications. The 484-ball FBGA package provides a good compromise between I/O count and board area, and is a popular choice for designs that need more I/Os than smaller packages but do not require the density of larger ones. Technically, the Artix-7 family is optimized for the lowest power and cost at 28nm, delivering the highest performance/watt fabric and AMS integration. The device includes hardened memory controllers, DSP slices, and clock management tiles (MMCM and PLL) that support a wide range of system requirements. The 28nm process technology enables high logic density and low static power, which is critical for battery-powered and thermally constrained applications. Typical applications for the XC7A35T-2FGG484C include industrial motor control, software-defined radio, medical imaging, and video processing. Its combination of logic capacity, I/O count, and cost-effectiveness makes it ideal for these and other high-volume, cost-sensitive designs. When designing with this device, careful attention should be paid to power supply decoupling and the configuration interface. The FPGA requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a configuration source (e.g., SPI flash) to boot. Proper decoupling and a clean power-up sequence are essential for reliable operation.

Cotización Contacto

Subcategorías

Productos (35.000+)

XC7A15T-1FTG256I - 16,640-Cell Artix-7 FPGA | AMD

XC7A15T-2FTG256C - 16,640 LEs Artix-7 FPGA | AMD

XC7A15T-3FTG256E - 16,640 Logic Cells, 170 I/O | AMD

XC7A200T-1FBG484I - 740K Logic Cells FPGA | AMD Xilinx

XC7A200T-1FBG676I - 740K Logic Cells FPGA | AMD Xilinx | FBG676

XC7A200T-2FBG484C - Artix-7 FPGA 740K Logic Cells | AMD Xilinx

XC7A200T-2FBG484I - Artix-7 FPGA 215K Logic Cells | AMD Xilinx

XC7A200T-2FBG676C - 740K Logic Cells FPGA | AMD Xilinx

XC7A200T-2FBG676I - 740K Logic Cells FPGA | AMD Xilinx

XC7A200T-2FFG1156I - Artix-7 FPGA 215K Logic Cells | AMD

XC7A200T-2FGG484I - Artix-7 FPGA 215K Logic Cells | AMD

XC7A200T-3FBG676I - Artix-7 FPGA, 740K Logic Cells | AMD

XC7A25T-1CPG238C - Artix-7 FPGA, 23K Logic Cells | AMD

XC7A25T-1CPG238I - Artix-7 FPGA, 23K Logic Cells, 238-BGA | AMD

XC7A35T-1CPG236C - 35T Artix-7 FPGA | AMD | 106 I/O

XC7A35T-1CS324I - Artix-7 FPGA, 33K Logic Cells, 210 I/O, 324-BGA | AMD

XC7A35T-1CSG324C - Artix-7 FPGA, 33k Logic Cells, 324-BGA | AMD

XC7A35T-1FG484I - Artix-7 FPGA 33K LEs, 484-BGA | AMD/Xilinx

XC7A35T-1FGG484I - Artix-7 FPGA, 250 I/O | AMD

XC7A35T-1FT256I - 33,280-Cell Artix-7 FPGA | AMD

XC7A35T-1FTG256C - Artix-7 FPGA, 33K Logic Cells | AMD Xilinx

XC7A35T-1FTG256I - 33K Cell Artix-7 FPGA | AMD

XC7A35T-2CPG236I - Artix-7 FPGA 33280 Logic Cells | AMD

XC7A35T-2FGG484C - Artix-7 FPGA 33280 Cells | AMD