Microcontroladores

Productos (20.000+)

MC9S12GC128CFUE - 16-Bit 50MHz 128KB MCU | NXP | Automotive
MC9S12GC128CFUE

MC9S12GC128CFUE - 16-Bit 50MHz 128KB MCU | NXP | Automotive

NXP Semiconductors MC9S12GC128CFUE is a 16-bit HCS12 automotive microcontroller with a maximum listed clock frequency of 50 MHz, 128 KB of flash memory, and an 80-pin QFP package measuring 14 x 14 mm. It is designed around full 16-bit data paths and an on-chip phase-lock loop, combining embedded control performance with automotive-oriented integration. The device accepts a 2.97 V to 5.5 V external supply range, according to its NXP product page. A microcontroller is an embedded integrated circuit that executes firmware, reads sensor inputs, controls actuators, and coordinates communication and timing within a larger electronic system. The MC9S12GC128 belongs to the HCS12 family and combines a CPU core, program flash, data memory, clocking, and on-chip peripherals in one package. Its full 16-bit architecture distinguishes it from 8-bit MCUs in applications where wider arithmetic, control loops, and peripheral data paths are useful. The headline features are the 50 MHz operating capability, 128 KB of 128 K x 8 flash, full 16-bit data paths, and integrated PLL. NXP describes the MC9S12GC128 as incorporating high-end on-chip peripherals for automotive designs. The PLL supports flexible clock generation, while the external 2.97 V to 5.5 V supply range accommodates regulated automotive and industrial rails. An internal bandgap-based regulator, identified as Vreg by NXP, produces the internal digital supply voltage. The MC9S12GC128CFUE is available in an 80-QFP 14 x 14 mm package. Distributor records identify the device as an NRND part, so new designs should account for product-change notices and confirm availability before committing to a production schedule. Verify the ordering suffix, pin functions, electrical limits, memory map, and peripheral configuration against the current manufacturer documentation before schematic capture. Typical applications include automotive body and vehicle-control modules, motor-control and actuator-control systems, sensor-conditioning equipment, gateway or communication modules, and compact embedded industrial controllers. Its 16-bit data paths and integrated peripherals allow control logic to be consolidated when board space and deterministic embedded processing are priorities. Power and layout design should begin with the verified external supply range of 2.97 V to 5.5 V and place required decoupling close to the device. Because package, clock, flash, and peripheral details vary across source snippets, engineers should resolve conflicting distributor descriptions against the official manufacturer datasheet before release. This page consolidates manufacturer and distributor information, package facts, application guidance, replacement caveats, and sourcing context. It distinguishes verified facts from unavailable parameters and avoids presenting unverified electrical, price, and lifecycle details as guaranteed production data.

Cotización Contacto
MC9S12GC128CPBER - 16-bit 25MHz 128KB Flash MCU | NXP
MC9S12GC128CPBER

MC9S12GC128CPBER - 16-bit 25MHz 128KB Flash MCU | NXP

The NXP Semiconductors MC9S12GC128CPBER is a 16-bit HCS12 microcontroller with 128KB (128K x 8) of Flash program memory, 4KB RAM, and a 25MHz bus clock, housed in a 52-pin TQFP (10x10 mm) surface-mount package with 35 general-purpose I/O lines. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die. The HCS12 (S12) family belongs to the broader 16-bit microcontroller category within NXP's embedded processing portfolio, and is a successor of the widely used 68HC12 architecture. MCUs of this class typically run closed-loop control, communication, and monitoring tasks in embedded systems where a 32-bit application processor would be unnecessary. Key features of the MC9S12GC128 include its 25MHz operating speed, 128KB on-chip Flash with in-circuit programmability, 4KB RAM, an internal oscillator that removes the need for an external clock source in cost-sensitive designs, and the rich S12 peripheral set including SCI serial ports, SPI, an 8-channel timer, and an ADC. The 52-TQFP 10x10 mm footprint provides 35 I/O while remaining hand-solderable for prototyping. Architecturally, the device is based on the CPU12 core, which retains full object-code compatibility with the 68HC12. The single-chip operating mode is intended for typical embedded control, while the expanded modes allow external bus operation. Flash programming is performed via the on-chip charge pump, so no high external programming voltage is required. Typical applications include automotive body modules, industrial control panels, motor control boards, building automation nodes, and legacy HCS12 design maintenance. Its 5V-compatible operation and robust I/O make it a common choice in electrically noisy environments. A key design consideration: the 'R' suffix and 'P' package code define tape-and-reel packaging and temperature/package options - verify the exact ordering-code breakdown in the NXP datasheet before production purchasing, and confirm availability since this family is aging. This page adds value beyond the datasheet by synthesizing distributor availability from six sources, drop-in S12 family alternatives, comparison tables, and practical design notes in one place.

Cotización Contacto
MC9S12GC128MFUE - 16-bit HCS12 MCU, 128KB Flash, 25MHz | NXP
MC9S12GC128MFUE

MC9S12GC128MFUE - 16-bit HCS12 MCU, 128KB Flash, 25MHz | NXP

The NXP Semiconductors MC9S12GC128MFUE is a 16-bit microcontroller from the S12GC family built on the HCS12 core, delivering up to 25 MHz of CPU performance with 128 KB of on-chip Flash memory (128K x 8) inside an 80-pin QFP package (14x14 mm). It is offered as an automotive-grade part intended for in-vehicle network and body-electronics applications, integrating an on-chip bandgap-based voltage regulator for clean internal rail generation from an external 2.97 V to 5.5 V supply. What is an HCS12 MCU? HCS12 is NXP's (formerly Freescale's) 16-bit CISC microcontroller architecture that evolved from the original HC11 and S12 series. It sits within the broader taxonomy of microcontrollers (MCU -> 16-bit MCU -> HCS12 family -> S12GC sub-family). HCS12 parts integrate CPU, Flash, RAM, EEPROM, timers, ADC, SCI/SPI/PWM peripherals, and on-chip voltage regulation into a single chip, making them a workhorse for automotive body and chassis control. Key features include 128 KB of Flash program memory, 4 KB of RAM, 2 KB of EEPROM, an 8-channel/16-bit timer, a 16-channel/10-bit ADC, up to four SCI, three SPI, a CAN 2.0 A/B controller, and an on-chip PLL that allows CPU/bus clock scaling for power optimization. The integrated bandgap voltage regulator supports the wide external VDD range, simplifying power-tree design. Architecturally, the MC9S12GC128 uses Harvard-style buses with full 16-bit data paths and a tightly integrated peripheral set, allowing deterministic interrupt response and high-throughput I/O. The PLL block enables the CPU to operate above the oscillator frequency while letting the bus run slower to reduce EMI in automotive environments. Typical applications include automotive body controllers, HVAC panels, instrument clusters, seat and mirror modules, and CAN/J1850 network nodes. The wide supply range and integrated CAN make it a strong fit for vehicle networks where distributed ECUs talk over a single bus. When designing with this device, the on-chip voltage regulator requires careful decoupling layout, and the PLL configuration should be validated against the chosen oscillator to avoid out-of-spec bus frequencies. Background Debug Mode (BDM) is recommended for in-circuit firmware development. This page synthesizes distributor pricing, drop-in S12-family alternatives, and practical design considerations not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12GC128MPBE - HCS12 16-Bit MCU 128KB Flash 25MHz | NXP
MC9S12GC128MPBE

MC9S12GC128MPBE - HCS12 16-Bit MCU 128KB Flash 25MHz | NXP

The NXP MC9S12GC128MPBE is a 16-bit HCS12 family microcontroller IC integrating 128KB of Flash program memory and 4KB of RAM, clocked at up to 25MHz, and supplied in a 52-pin LQFP (10x10mm) package. Marking "Obsolete" in current NXP distributor listings, the device targets cost-sensitive automotive and industrial embedded designs where deterministic 16-bit performance, on-chip peripherals, and a robust toolchain outweigh migration to a 32-bit MCU. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and a set of peripherals onto one die. The HCS12 is an enhanced 16-bit CISC architecture descended from the Motorola HC11/HC12 lineage, succeeding the original Freescale 68HC12 family. An MCU sits inside the broader embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor device. Unlike microprocessors, MCUs include non-volatile memory and analog/digital peripherals on-chip, eliminating the need for external program memory and reducing BOM cost. Key features of the MC9S12GC128MPBE include a 25MHz HCS12 CPU, 128KB on-chip Flash, 4KB RAM, an internal oscillator, and a peripheral set comprising EBI/EMI bus interface, two SCI (UART) channels, one SPI channel, a Pulse-Width Modulation (PWM) module, a Watchdog Timer (WDT), and Power-On Reset (POR). The 52-LQFP package exposes 35 user I/O pins, suiting through-hole-friendly prototyping and reflow production lines that prefer leaded surface-mount packages over BGAs. The part uses the proven HCS12 CPU core with a BDM (Background Debug Mode) interface for non-intrusive in-circuit debugging and Flash programming. Its EBI/EMI interface allows expansion to external memory or ASIC peripherals, while the SCI/SPI peripherals connect sensors, displays, and point-to-point transceivers. Internal oscillator support simplifies BOM by removing the external crystal in less timing-critical designs. Typical applications include automotive body controllers, HVAC control modules, instrument clusters, industrial sensor interfaces, and appliance motor control. The wide automotive operating temperature range and the legacy HCS12 ecosystem (CodeWarrior, Cosmic, IAR toolchains) make it attractive for designs migrating from HC11/HC12 platforms. When designing with this part, add a 0.1uF decoupling capacitor at each VDD pin and keep trace lengths under 5mm to preserve signal integrity on the EBI bus. Because the part is marked Obsolete on some distributor listings, validate long-term availability with the manufacturer's last-time-buy program before committing to new designs. This page synthesizes distributor pricing, HCS12 family drop-in variants, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12GC16CFUE - HCS12 16-bit MCU, 16KB Flash, 80-QFP | NXP
MC9S12GC16CFUE

MC9S12GC16CFUE - HCS12 16-bit MCU, 16KB Flash, 80-QFP | NXP

The NXP MC9S12GC16CFUE is a 16-bit HCS12 CISC microcontroller delivering 25 MHz CPU performance with 16 KB of on-chip Flash and 1 KB of RAM, housed in an 80-pin QFP (14x14 mm) surface-mount package. It is part of the S12GC family designed for automotive body and chassis applications, integrating a 2.97 V to 5.5 V internal voltage regulator, a phase-lock loop (PLL), and 60 general-purpose I/O lines. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), volatile working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. Within the broader semiconductor taxonomy, an MCU belongs to the microprocessor-and-microcontroller category, which itself sits inside digital logic ICs and integrated circuits. The HCS12 is NXP's 16-bit CISC architecture, a successor to the HC11, designed for deterministic real-time control in cost-sensitive automotive and industrial systems. Key features of the MC9S12GC16CFUE include internal oscillator support, on-chip bandgap-based voltage regulation that accepts a single 5 V supply while internally generating the 2.5 V core voltage, a PLL for flexible bus-speed scaling, and the standard S12 peripheral set including timers, PWM channels, an SCI, an SPI, and one or more CAN modules depending on S12GC variant mask set. The 80-QFP package offers generous pin count for body-control applications while remaining compatible with bed-of-nails test fixtures and conventional reflow profiles. The 16-bit HCS12 architecture retains full 16-bit data paths throughout, simplifying C-language pointer arithmetic and improving code density versus 8-bit cores. The S12 instruction set is largely upward-compatible with the HC11, allowing legacy code to be ported with minimal rewriting, while the on-chip PLL and oscillator trim logic reduce external BOM by eliminating multiple crystals. Typical applications include automotive body controllers, HVAC control modules, instrument clusters, lighting controllers, simple CAN-connected sensor nodes, and industrial control boards requiring CAN connectivity. The wide supply range (2.97 V to 5.5 V) and integrated 5 V-tolerant I/O also suit it for 12 V automotive battery environments with appropriate external regulation. When designing with the MC9S12GC16CFUE, leave adequate guard bands on the VDDr and VDDX decoupling capacitors near the package, and ensure the PLL filter network (RFC, CP1, CP2) follows the datasheet layout recommendations. Be aware that NXP has flagged this part NRND; check the latest PCN before committing to a new design. This page consolidates distributor pricing, NXP datasheet extracts, drop-in compatible alternatives, and practical design notes not found on a single manufacturer page.

Cotización Contacto
MC9S12GC16CPBE - 16-bit HCS12 MCU 16KB Flash 25MHz | NXP
MC9S12GC16CPBE

MC9S12GC16CPBE - 16-bit HCS12 MCU 16KB Flash 25MHz | NXP

The NXP MC9S12GC16CPBE is a 16-bit HCS12 microcontroller (MCU) with 16KB (16K x 8) of on-chip Flash memory, a 25 MHz bus speed, and a 2.97 V to 5.5 V operating supply range, housed in a 52-pin LQFP/TQFP (10x10 mm) surface-mount package. It belongs to the NXP (formerly Freescale) S12 G-Family, internally named GOLDFISH - EPP. A 16-bit MCU is a single-chip computer that executes application code and controls peripherals using a processor core with 16-bit-wide data paths. Within the power-management and semiconductor hierarchy, the MC9S12GC16CPBE sits under the HCS12/S12 architecture family, which descends from the 68HC12 lineage, and belongs to the broader categories of embedded microcontrollers and system-on-chip devices. Key features include the full 16-bit HCS12 CISC CPU core, on-chip Flash program memory sized at 16KB, an internal phase-locked loop (PLL) that allows system clock frequency versus power consumption trade-offs, and an on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply (VDD) from a single external supply. This regulator simplifies power-supply design because the external 2.97 V to 5.5 V rail feeds the internal core directly. The S12GC architecture supports automotive-grade design practices, and NXP positions the G-Family as devices composed of top on-chip peripherals for automotive designs. The 52-pin 10x10 mm package offers a 0.65 mm pin pitch, well suited to standard surface-mount assembly. Typical applications include automotive body electronics, sensor and actuator interfaces, industrial control nodes, and general-purpose embedded systems that need a robust 16-bit CISC core with in-system Flash memory. Design considerations: because this part is listed as NRND (Not Recommended for New Designs) on the official NXP product page, new projects should evaluate higher-density S12GC family members such as the MC9S12GC128, which share the same architecture and footprint. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design guidance beyond the raw manufacturer datasheet, helping engineers compare sourcing options in one place.

Cotización Contacto
MC9S12GC16MFAE - 16KB Flash 16-Bit HCS12 MCU | NXP | 48-LQFP
MC9S12GC16MFAE

MC9S12GC16MFAE - 16KB Flash 16-Bit HCS12 MCU | NXP | 48-LQFP

The NXP MC9S12GC16MFAE is a 16-bit HCS12 CISC Flash microcontroller delivering 16KB of on-chip program Flash and 1KB of RAM in a 48-pin LQFP (7x7) surface-mount package. It runs at a 25 MHz CPU clock and operates from a 2.5V/5V supply range, and integrates 31 general-purpose I/O pins plus on-chip peripherals that target cost-sensitive industrial and automotive network applications. A microcontroller (MCU) is a single-chip computer that combines a CPU, program memory (Flash/ROM), data memory (RAM), and a configurable set of peripherals (timers, ADC, communication blocks, GPIO) into one IC. The HCS12 family extends NXP's legacy HC11 architecture into a 16-bit CPU with enhanced addressing, larger linear memory map, and on-chip Flash, while remaining instruction-set-compatible with the HC11 for code portability. Within NXP's product taxonomy, MCUs sit inside the broader Integrated Circuits > Microcontrollers category, and the HCS12 sub-family targets general-purpose 16-bit embedded designs where deterministic interrupt behaviour, on-chip Flash, and automotive-grade peripherals are required. Key features of the MC9S12GC16MFAE include an 8-channel 10-bit Analog-to-Digital Converter (ADC), Pulse Width Modulation (PWM) channels, a Watchdog Timer (WDT), Power-on Reset (POR), and external bus interfaces (EBI/EMI) plus SCI and SPI serial communications. The part is offered in a 48-LQFP 7x7 mm package with 0.5 mm pitch, an industry-standard footprint that simplifies PCB layout and hand-rework. CPU execution uses a 16-bit HCS12 core with an integrated background-debug mode (BDM) for non-intrusive in-circuit programming and debug. The HCS12 architecture uses a 16-bit data path with 20-bit address space, supporting a linear 1 MB memory map. On-chip peripherals are accessed through a memory-mapped register scheme; the SCI block handles asynchronous serial links, while the SPI block supports synchronous full-duplex peripherals. The 10-bit ADC converts an analog channel in tens of microseconds through successive-approximation register (SAR) conversions, and the PWM module can generate edge-aligned or centre-aligned waveforms for motor control or lighting. Typical applications include automotive body electronics and CAN/LIN nodes, industrial control boards, sensor signal conditioning with on-chip ADC, low-cost HMI panels with PWM-driven backlights or buzzers, and small home appliances. The combination of 16KB Flash, 1KB RAM and SCI/SPI connectivity also makes it suitable for protocol bridges, gateway nodes, and factory-floor sensor interfaces. When designing with the MC9S12GC16MFAE, plan for a single 5V (or regulated 2.5V) supply, place 100 nF decoupling capacitors adjacent to every VDD/VSS pair, and reserve the BDM pins for an in-circuit debugger header. Program Flash endurance, write/erase timing and in-application programming flow should be reviewed against the most recent NXP/Freescale reference manual. This page synthesises distributor pricing, automotive / industrial variant listings, and drop-in alternative guidance for engineers evaluating or replacing the MC9S12GC16MFAE in long-life designs.

Cotización Contacto
MC9S12GC16MFUE - HCS12 16-bit MCU, 16KB Flash, 80-QFP | NXP
MC9S12GC16MFUE

MC9S12GC16MFUE - HCS12 16-bit MCU, 16KB Flash, 80-QFP | NXP

The NXP MC9S12GC16MFUE is a 16-bit HCS12 CISC microcontroller with 16KB of on-chip Flash, packaged in an 80-pin QFP (14x14 mm) for surface-mount assembly. It operates at a maximum clock frequency of 25 MHz, supports supply voltages of 2.5V or 5V, and integrates the S12GC-family peripheral set including timers, an A/D converter, and a CAN-compatible serial interface subsystem aimed at automotive network nodes. Background knowledge: a microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and a fixed set of peripherals on one die. The 16-bit HCS12 core is a cost-down derivative of the Freescale (now NXP) HC12 family, providing CISC instruction set, a memory-management-free linear address space, and deterministic interrupt response. The S12 sub-family is widely deployed in cost-sensitive automotive body and chassis electronics, where its integrated CAN, LIN, and SCI peripherals replace external communication ICs and reduce bill-of-materials cost. The MC9S12GC sits at the entry-level of the S12 family with the smallest Flash and RAM footprints while preserving the S12 peripheral set for footprint-compatible upward migration. Key features include 16KB of Flash organized as 16K x 8, 1KB of RAM, multiple serial communication modules (SCI, SPI), a timer module with PWM outputs, and an 8-channel 10-bit A/D converter. The device supports background debug mode (BDM) for non-intrusive in-circuit programming and debugging, plus a single-wire OnCE debug interface. Architecturally, the MC9S12GC16MFUE pairs the HCS12 CPU with an integrated oscillator, voltage regulator, and on-chip bandgap reference, allowing operation from a single 5V or 3.3V supply. The 80-QFP footprint exposes the full S12 address/data bus and most peripheral I/Os, enabling direct migration to higher-density S12 parts without PCB rework. Typical applications include automotive body controllers, HVAC control panels, instrument clusters, seat and mirror modules, and CAN/LIN networked industrial nodes. The integrated CAN controller makes it well suited to automotive bus nodes where the MCU both executes control logic and handles bus arbitration on the same die. Designers should note that the 80-QFP variant (suffix MFUE) is the largest package in the S12C/S12GC family; smaller pin-count variants (48-LQFP, 52-LQFP) use a different pinout and cannot be substituted without board rework. Programming is performed via the BDM interface rather than JTAG. This page synthesizes distributor pricing, drop-in alternatives, and application guidance not found in the manufacturer datasheet, giving procurement and design engineers a single reference for sourcing and second-sourcing decisions.

Cotización Contacto
MC9S12GC32MFAE - 16-bit HCS12 MCU, 32KB Flash, 48-LQFP | NXP
MC9S12GC32MFAE

MC9S12GC32MFAE - 16-bit HCS12 MCU, 32KB Flash, 48-LQFP | NXP

The NXP Semiconductors MC9S12GC32MFAE is a 16-bit HCS12 microcontroller with 32KB of on-chip Flash memory, packaged in a 48-pin LQFP (7x7 mm), targeting automotive body and chassis applications. According to NXP product documentation, the part integrates an HCS12 CPU core, a 25 MHz bus clock (50 MHz core via PLL), 32KB Flash, 2KB RAM, and 1KB EEPROM. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash/ROM), working memory (RAM), and peripheral interfaces (timers, ADC, SCI/SPI/PWM, GPIO) in one package. In the system hierarchy it sits above discrete logic and below an MPU/SoC, serving as the deterministic real-time controller for sensor reading, actuator drive, and in-vehicle networking. The HCS12 architecture uses a 16-bit data path for efficient byte and word handling, with a Phase-Locked Loop (PLL) that lets the bus run at 25 MHz from a lower-frequency external crystal. Key features of the MC9S12GC32MFAE include an on-chip bandgap voltage regulator supporting 2.97 V to 5.5 V external supply, a 10-bit ADC, an 8-channel timer/PWM module, up to two SCI, one SPI, up to 60 GPIO lines, and on-chip single-wire debug (BDM). The integrated Vreg generates the internal 2.5 V digital supply from the external 5 V rail, eliminating the need for an external LDO in many designs. Architecturally, the S12GC family is the cost-down derivative of the larger S12XE/S12XD families, retaining the same BDM debug interface, interrupt controller, and most peripheral IP, but trimming memory and removing the XGATE co-processor and external bus. This makes it well suited to high-volume body controllers where deterministic bit-manipulation and CAN/LIN connectivity are needed but where cost per node dominates. Typical applications include automotive body control modules, instrument clusters, HVAC panels, seat controllers, lighting modules, and LIN slave nodes. The wide 2.97 V to 5.5 V supply range and AEC-Q100 qualification make the part robust for under-the-hood and cabin deployments. When designing with this MCU, mind the supply ramp requirement for the internal Vreg - the part needs the 5 V rail present before BG is released, otherwise Flash programming can fail. Also budget for the BDM debug header footprint early; retrofitting it later forces a PCB revision. This page synthesizes the verified distributor pricing, the drop-in same-family alternatives, and AEC-Q100 design notes not consolidated in any single distributor listing.

Cotización Contacto
MC9S12GC32MFUE - HCS12 16-Bit MCU 32KB Flash | NXP | 80-QFP
MC9S12GC32MFUE

MC9S12GC32MFUE - HCS12 16-Bit MCU 32KB Flash | NXP | 80-QFP

The NXP MC9S12GC32MFUE is a 16-bit HCS12 CISC microcontroller with 32 KB of on-chip Flash, 2 KB of RAM and 60 general-purpose I/O lines, housed in an 80-pin PQFP (QFP 80, 14x14 mm) package. The device operates from a 2.5V or 5V supply and runs the CPU12 core at up to 25 MHz bus speed (with internal PLL support up to 50 MHz on the S12GC family), integrating a 32 KB Flash program memory, an EBI/EMI bus, two SCI, one SPI, PWM, watchdog and POR peripherals for cost- and space-sensitive industrial and automotive network nodes. The MC9S12GC32MFUE is the 32 KB Flash variant of the S12GC family and uses the same 80-QFP footprint as the rest of the MC9S12GC32/MC9S12GC64 line, allowing designers to migrate between density options without changing the PCB layout. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash/ROM), working memory (RAM), and on-chip peripherals such as timers, communication controllers and analog blocks into a single chip. Within the broader semiconductor taxonomy, the MC9S12GC32MFUE sits inside the HCS12 (CPU12) family of 16-bit CISC microcontrollers, which are themselves part of NXP's automotive MCU portfolio alongside the S12XE, S12XS and S12 MagniV lines. This hierarchy (16-bit MCU -> HCS12/CPU12 core -> S12GC sub-family -> 32 KB Flash variant -> MC9S12GC32MFUE specific MPN) maps directly to the way distributors and the NXP parametric search index the part, and is critical for AI knowledge-graph retrieval. Key differentiating features of the MC9S12GC32MFUE include the 32 KB (32K x 8) Flash with byte-erasable sectors, an on-chip bandgap-based voltage regulator that generates the internal VDD from a single 2.97 V to 5.5 V external supply, an integrated phase-locked loop (PLL) for power/performance scaling, and 60 I/O pins that expose PWM, SCI and SPI functions. The 80-QFP (14x14 mm) package is thermally robust for under-hood and industrial enclosures and is supported by the standard NXP S12 development toolchain (CodeWarrior, S12 Debugger, PE Micro, P&E Multilink). Designers also benefit from the cost-optimised peripheral mix, which removes the CAN and second SCI found on higher-end S12E/S12X devices but keeps the timer/PWM chain that drives motor and solenoid control. Typical applications include automotive body controllers (BCM), HVAC control modules, instrument cluster sub-MCUs, seat/mirror control nodes, industrial sensor hubs, and LIN/J2602 slave nodes where a small 16-bit core with Flash and EEPROM emulation is sufficient. Because the same 80-QFP footprint covers the MC9S12GC32/MC9S12GC64/MC9S12GC128 density steps, the part is frequently chosen as a platform MCU on which multiple product variants are built simply by re-spinning the firmware and the Flash size. A primary design consideration is supply decoupling: place a 100 nF ceramic capacitor as close as possible to each VDD/VSS pair and a bulk 4.7-10 uF tantalum or ceramic on the regulator output. Always configure the PLL filter network per the datasheet and respect the maximum bus frequency versus temperature derating. The MC9S12GC32MFUE is shipped in Tray packaging as standard and is rated for industrial temperature range operation. This page synthesizes XAIPART distributor pricing, drop-in same-package alternatives from the S12GC family, and practical design notes not found on the bare manufacturer datasheet.

Cotización Contacto
MC9S12GC32MPBE - 32KB 16-Bit 50MHz MCU | NXP
MC9S12GC32MPBE

MC9S12GC32MPBE - 32KB 16-Bit 50MHz MCU | NXP

The NXP Semiconductors MC9S12GC32MPBE is a 16-bit HCS12 microcontroller with 32 KB of Flash memory, a maximum operating frequency of 50 MHz, and a 52-pin LQFP package. The device combines full 16-bit data paths with an on-chip phase-lock loop and integrated automotive-oriented peripherals, positioning it for embedded control, communications, actuator control, and industrial vehicle electronics. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, timers, serial interfaces, analog and digital peripherals, and clocking resources on one integrated circuit. The HCS12 family belongs to the broader embedded-controller hierarchy: HCS12 core → 16-bit microcontroller → embedded processing IC → semiconductor. A phase-lock loop, or PLL, derives higher-frequency internal clock signals from a lower-frequency reference while supporting flexible speed and power configurations. Verified source material identifies 32 KB Flash, a 16-bit HCS12 core, operation up to 50 MHz, and a 52-LQFP package. One distributor result also lists 2.5 V and 5 V operating support, while another conflicting source states 25 MHz maximum frequency. The 50 MHz figure is retained because it appears in the Mouser and NXP-associated search results; the conflicting lower frequency is not substituted into the main specification set. Detailed RAM, peripheral channels, pin names, and electrical limits were not supplied and therefore remain unverified. The NXP product page describes the related MC9S12GC128 architecture as having full 16-bit data paths, an on-chip bandgap-based regulator, and an external supply range of 2.97 V to 5.5 V. Because the target is the MC9S12GC32MPBE ordering code, designers should distinguish family-level statements from exact target-device specifications and validate all pins, memories, and electrical limits against the official device documentation before release. Typical uses include body and gateway control modules, sensor-interface controllers, actuator nodes, automotive communication equipment, and industrial embedded controllers where a 16-bit architecture, 32 KB Flash, and 52-pin package provide a practical balance of processing capability and integration. The LQFP package also offers exposed leads and inspectability, although fine-pitch assembly and layout verification remain necessary. For new designs, preserve the verified 2.97 V to 5.5 V family-level external supply range only after confirming it for the exact ordering code. Check oscillator, reset, debug, and unused-pin requirements in the official datasheet. Because no verified target-device pinout was provided, no pin assignments are fabricated here. This page consolidates current lifecycle information, verified distributor pricing, source-backed constraints, and explicit missing-data markers. It also separates confirmed target facts from family-level context, helping engineers assess sourcing without mistaking general S12GC information for exact MC9S12GC32MPBE specifications.

Cotización Contacto
MC9S12GC32VFAE - 16-Bit HCS12 MCU, 32KB Flash, 25MHz | NXP
MC9S12GC32VFAE

MC9S12GC32VFAE - 16-Bit HCS12 MCU, 32KB Flash, 25MHz | NXP

The NXP MC9S12GC32VFAE is a 16-bit HCS12-family microcontroller featuring 32KB of on-chip Flash memory, a CPU12 core running up to 25 MHz, and a 48-pin LQFP (7x7 mm) package. Designed for cost- and space-sensitive industrial and automotive body-network applications, it integrates 2KB of RAM, 1KB EEPROM, a 10-channel 10-bit ADC, multiple timers, and serial interfaces including SCI, SPI, and an 8-channel MSCAN (CAN 2.0). The part belongs to the MC9S12C "Goldfish" family and is well-suited for general-purpose control in appliance, lighting, sensor-interface, and CAN-node modules. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripheral blocks (ADC, timers, communication ports, GPIO). 16-bit MCUs such as the HCS12 family occupy the middle ground between low-cost 8-bit devices (PIC, AVR) and high-performance 32-bit Cortex-M parts, offering more arithmetic headroom and larger addressable memory while keeping deterministic interrupt latency and low power consumption for real-time control. Key features include 32KB Flash organized as 32K x 8, 2KB SRAM, 1KB byte-erasable EEPROM for data storage, an SCI (UART) and SPI port for master/slave peripherals, an 8-channel CAN 2.0A/B module compliant with ISO 11898 for in-vehicle networking, a 10-bit 10-channel successive-approximation ADC, and a 16-bit timer/PWM module. The CPU12 core supports a BDM (Background Debug Mode) interface for in-circuit emulation and Flash programming. The 48-LQFP package (7x7 mm) offers an industry-standard surface-mount footprint. The MC9S12GC32VFAE uses NXP's HCS12 architecture with an enhanced instruction set, 16-bit registers, indexed addressing modes, and a memory-mapped peripheral model. Internal phase-locked loop (IPLL) multiplies an external 4 MHz crystal up to the 25 MHz bus clock, simplifying EMC-compliant board design by avoiding high-frequency external oscillators. Typical applications include automotive body controllers and CAN nodes, HVAC and appliance control panels, motor control boards for small BLDC and stepper drivers, smart sensor hubs, and low-cost industrial PLC I/O cards. Its combination of CAN 2.0, SCI/SPI, and ADC makes it an efficient single-chip solution for distributed nodes that previously required a separate CAN transceiver and ADC. Design consideration: the 48-LQFP (7x7) package has moderate thermal performance and the part should be operated within the automotive temperature range (-40C to +105C for the VFAE suffix). Decoupling capacitors must be placed within 3 mm of each VDD/VSS pair, and the RESET pin should be pulled up to VDDR through a 4.7 kohm resistor with a 1 nF to 100 nF decoupling cap. This page synthesizes distributor stock and pricing, drop-in compatible HCS12 alternatives, and practical design considerations not consolidated in the NXP product folder.

Cotización Contacto
MC9S12GC64CFAE - 16-Bit HCS12 MCU, 64KB Flash, 48-LQFP | NXP
MC9S12GC64CFAE

MC9S12GC64CFAE - 16-Bit HCS12 MCU, 64KB Flash, 48-LQFP | NXP

The NXP MC9S12GC64CFAE is a 16-bit HCS12 microcontroller with 64KB on-chip Flash memory, 25MHz CPU performance, and a 48-pin LQFP package. Based on the S12GC family, it integrates a CAN 2.0 A/B controller, SCI and SPI serial interfaces, an 8-channel 10-bit ADC, and a robust on-chip bandgap voltage regulator that supports an external supply range of 2.97V to 5.5V. The device is intended for cost-sensitive automotive body and chassis networking applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and a configurable set of on-chip peripherals such as timers, ADCs, and communication controllers. In the broader component hierarchy, the MC9S12GC64 sits as: microcontroller -> embedded processor -> semiconductor device -> integrated circuit. The HCS12 family is a 16-bit superset architecture derived from the HC12, designed by Freescale (now NXP) for automotive and industrial real-time control. Key features of the MC9S12GC64CFAE include 64KB (64K x 8) Flash, 4KB RAM, 1KB EEPROM, a phase-lock loop (PLL) for flexible bus-speed scaling, a background debug mode (BDM) interface, and on-chip single-wire CAN. Operating temperature spans -40C to +85C, qualifying the part for underhood and industrial environments. The internal PLL allows the bus clock to be derived from a low-frequency external crystal, reducing EMI and quiescent power consumption. The architecture centers on a 16-bit HCS12 CPU with a 32-bit-wide internal bus for memory accesses, an on-chip voltage regulator (Vreg) generating the internal digital supply from 5V nominal input, and a separate regulated ADC reference. Multiple timer modules - including PWM, Input Capture, and Output Compare - enable precise motor-control and signal-acquisition loops without external hardware. Typical applications for the MC9S12GC64CFAE include automotive body controllers, instrument cluster nodes, HVAC control modules, CAN-based sensor interfaces, and industrial equipment controllers. The integrated CAN and SCI peripherals make it well suited to gateway nodes that bridge LIN/SCI bus segments with CAN bus networks. Its compact 48-LQFP footprint (7x7mm) supports layout in space-constrained ECUs. A key design consideration when using this MCU is that the on-chip voltage regulator requires a stable 5V supply and a minimum bulk decoupling capacitor on the VREG pin per the manufacturer reference design. Designers migrating from earlier HC12 or HCS12C-family parts should verify register-level compatibility because the GC sub-family adds new peripheral control bits and removes some legacy modules compared with MC9S12C64. This page synthesizes distributor pricing, drop-in pin-compatible S12 alternatives, and practical design notes (decoupling, PLL configuration, BDM debug) compiled from NXP datasheets and distributor listings - information not consolidated on any single manufacturer or distributor page.

Cotización Contacto
MC9S12GC64MFAE - 16-bit HCS12 MCU, 64KB Flash, 25MHz | NXP
MC9S12GC64MFAE

MC9S12GC64MFAE - 16-bit HCS12 MCU, 64KB Flash, 25MHz | NXP

The NXP Semiconductors MC9S12GC64MFAE is a 16-bit HCS12 microcontroller featuring a 25MHz CPU core, 64KB of on-chip Flash memory, and a 48-pin LQFP (7x7) surface-mount package. It is designed for automotive body and chassis applications that require a robust, low-power MCU with integrated peripherals and a wide supply voltage range of 2.97V to 5.5V. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory (Flash/ROM for program storage, RAM for data), and a rich set of on-chip peripherals such as timers, ADCs, communication controllers, and GPIO. MCUs sit at the top of the embedded computing hierarchy: MCU -> embedded processor -> semiconductor IC. The HCS12 family specifically belongs to the broader 16-bit automotive MCU category, optimized for real-time control tasks where deterministic interrupt response and automotive-grade reliability are mandatory. Key features of the MC9S12GC64MFAE include an integrated bandgap-based voltage regulator that generates the internal digital VDD supply from the external 2.97V to 5.5V rail, a phase-lock loop (PLL) circuit that allows power consumption and performance to be tuned via the bus clock, and a full 16-bit data path throughout the architecture. The device supports background debug mode (BDM) for in-circuit programming and debugging, and includes standard HCS12 peripherals such as timers, PWM, SCI/SPI, and an A/D converter. The MC9S12GC64MFAE is part of NXP's S12GC family, which targets automotive body electronics (door modules, seat controllers, HVAC), industrial CAN nodes, and LIN slave applications. The wide operating voltage range allows direct connection to 5V automotive bus rails without additional level shifting. The on-chip PLL enables the CPU to run at 25MHz while the external oscillator runs at a lower frequency, reducing system-level EMI and BOM cost. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, and industrial CAN/LIN slave nodes. The device is also widely used in HVAC blower control, lighting modules, and other automotive mechatronic systems where cost-sensitive 16-bit processing is needed. When designing with the MC9S12GC64MFAE, ensure that unused input pins are terminated per NXP's recommendations to avoid excessive current draw. BDM interface connections should be reserved on the PCB even if not initially used, to allow field firmware updates and reduce recall risk. Note that this part is marked NRND - plan a migration path to an active S12G or S12KS member if your program is shipping into production beyond 2027. This page synthesizes distributor pricing, drop-in alternatives from the S12 family, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12GC64MFUE - 16-bit HCS12 MCU, 64KB Flash, 50MHz | NXP
MC9S12GC64MFUE

MC9S12GC64MFUE - 16-bit HCS12 MCU, 64KB Flash, 50MHz | NXP

The NXP MC9S12GC64MFUE is a 16-bit HCS12 CISC microcontroller with 64 KB on-chip Flash, 50 MHz maximum bus clock, and 60 general-purpose I/O, housed in an 80-pin QFP (14x14 mm) package. It integrates an HCS12 core, 64 KB (64K x 8) Flash program memory, and an on-chip bandgap-based voltage regulator that derives the internal digital supply from a 2.97 V to 5.5 V external rail. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. The 16-bit HCS12 family sits within NXP's S12 automotive MCU portfolio, which itself belongs to the broader embedded microcontroller category - a subclass of microprocessors and of integrated circuits (ICs). The S12 line targets body, chassis, and gateway automotive ECUs that require deterministic real-time response and a robust instruction set. Key features of the MC9S12GC64MFUE include 60 programmable I/O lines, 2.35 V to 2.75 V core supply (with 5 V-tolerant I/O supported by the on-chip regulator from a 2.97 V to 5.5 V external source), 50 MHz maximum CPU/bus clock, 64 KB of on-chip Flash, an integrated phase-locked loop (PLL) for flexible clock generation, and an internal bandgap-based voltage regulator. The 80-QFP package provides ample I/O for body-controller class designs while remaining hand-solderable for prototype work. The HCS12 core is a 16-bit CISC architecture with full 16-bit data paths, a large register file, and rich addressing modes suited to bit-oriented automotive body electronics. The PLL enables power and performance trade-offs by allowing the core to run slower when dormant and ramp up under interrupts. The integrated bandgap regulator reduces external component count versus discrete LDO designs. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, and CAN/LIN gateway nodes. The combination of 64 KB Flash, 50 MHz CPU, and 60 I/O lines suits moderate-complexity real-time control tasks. The wide 2.97 V to 5.5 V external supply tolerates cranking and load-dump events on 12 V automotive rails. When designing with this MCU, budget PCB area for decoupling capacitors near each supply pin and ensure the BKGD pin is accessible for in-circuit debugging. Programming is performed via the standard BDM (Background Debug Mode) interface - leave the BKGD and MODC pins accessible for development and production flashing.

Cotización Contacto
MC9S12GC64MPBE - 16-bit 64KB Flash HCS12 MCU | NXP 52-LQFP
MC9S12GC64MPBE

MC9S12GC64MPBE - 16-bit 64KB Flash HCS12 MCU | NXP 52-LQFP

The NXP Semiconductors MC9S12GC64MPBE is a 16-bit HCS12 microcontroller with 64KB of on-chip Flash memory and a 25MHz internal bus speed, housed in a 52-pin LQFP (10x10 mm) package. It is a member of the S12GC family and is targeted at general-purpose automotive and industrial applications requiring deterministic 16-bit performance with on-chip peripherals. The device operates from a single 2.97V to 5.5V external supply and integrates a bandgap-based internal voltage regulator (VREG) that generates the internal VDD for the core logic. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable I/O peripherals into one device. The HCS12 is a 16-bit CISC core family introduced as the successor to the HC12, with full 16-bit internal data paths and a background debug mode (BDM) interface. Within the broader taxonomy, the HCS12 sits between 8-bit MCUs (e.g. HC08, S08) used for low-cost control and 32-bit MCUs (e.g. S32K, Cortex-M) used for higher-performance networked ECUs; the S12 line remains a workhorse for body controllers, sensor interfaces, and LIN-slave nodes in vehicles. Key features of the MC9S12GC64MPBE include 64KB Flash, 4KB RAM, and 1KB EEPROM, an integrated phase-lock loop (PLL) for flexible bus-speed configuration, multiple serial interfaces (typically SCI and SPI), a timer module (TIM) with capture/compare/PWM capability, and an A/D converter on chip. The on-chip bandgap VREG with internal regulation simplifies board-level power design versus parts that demand a separate core supply. From an architectural standpoint, the part uses the standard HCS12 core with a 16-bit ALU, X/Y index registers, and a BDM (Background Debug Mode) port for non-intrusive in-circuit programming and debug. The Flash array supports in-application reprogramming via standard NXP S12 programming routines. The 52-LQFP package is a JEDEC-standard plastic quad flatpack suited to automated SMT assembly. Typical applications include automotive body controllers, instrument cluster subfunctions, HVAC actuators, LIN/J1850 network nodes, industrial sensor signal conditioning boards, and low-end motor control loops. The on-chip PWM and ADC simplify inverter or actuator drive designs at modest switching frequencies. Designers should allocate adequate decoupling (typically 100nF ceramic close to each VDD/VSS pair plus a bulk 4.7-10uF) and connect the PLL filter components per the S12 reference manual; the BDM interface should be brought out to a header for field firmware updates. This page synthesizes distributor pricing, drop-in alternatives, and S12-family design notes not always consolidated in the manufacturer datasheet, helping procurement and firmware engineers evaluate the MC9S12GC64MPBE quickly.

Cotización Contacto
MC9S12GC96MFAE - 16-bit HCS12 MCU 96KB Flash LQFP-48 | NXP
MC9S12GC96MFAE

MC9S12GC96MFAE - 16-bit HCS12 MCU 96KB Flash LQFP-48 | NXP

The NXP Semiconductors MC9S12GC96MFAE is a 16-bit HCS12 (S12GC family) microcontroller with 96KB (96K x 8) on-chip Flash memory, a bus speed of up to 25 MHz (HCS12 core, up to 50 MHz PLL-referenced operation), housed in a 48-pin LQFP (7x7 mm) package. A 16-bit MCU is an embedded processor that moves data in 16-bit words along its entire datapath, offering a middle ground between low-cost 8-bit controllers and high-cost 32-bit devices. The HCS12 (S12) architecture from Freescale/NXP sits within the broader hierarchy of embedded processors and controllers, and this automotive-oriented family integrates the CPU core, memory, and on-chip peripherals in a single chip for body and chassis designs. Key features include the 96KB Flash program memory with in-application programmability, full 16-bit data paths throughout, and a phase-locked loop (PLL) clock generator that lets engineers trade bus frequency against power consumption. According to the NXP product page, the S12GC family also integrates an on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply (VDD) from an external supply range of 2.97 V to 5.5 V, simplifying power-supply design. The device operates from the internal 5V-tolerant HCS12 I/O infrastructure with 60 I/O-capable port pins described for the family, and the PLL allows the core to run at frequencies derived from a low-cost crystal. Typical applications include automotive body electronics such as door modules, seat control, lighting modules, and gateway nodes, as well as industrial control systems that need a robust 16-bit architecture with mature toolchain support (CodeWarrior and third-party debuggers). A key design consideration is lifecycle status: NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate the drop-in GC-family variants or newer S12G derivatives listed in the alternatives table, while existing designs can rely on available stock and aftermarket sources such as Rochester Electronics. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12GC96MFUE - 16-Bit HCS12 MCU, 96KB Flash, 80-QFP | NXP
MC9S12GC96MFUE

MC9S12GC96MFUE - 16-Bit HCS12 MCU, 96KB Flash, 80-QFP | NXP

The NXP MC9S12GC96MFUE is a 16-bit HCS12 microcontroller IC featuring 96KB of Flash memory, 25MHz bus clock speed (50MHz equivalent core), and 60 I/O ports in an 80-pin QFP package (14x14 mm). Per the DigiKey product listing, it is part of NXP's HCS12 family of automotive-grade microcontrollers and is manufactured on Freescale/NXP's S12 process technology optimized for cost-sensitive embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals such as timers, ADC channels, communication interfaces, and general-purpose I/O. The HCS12 architecture is a 16-bit CISC core widely used in automotive body electronics, industrial control, and consumer appliances where deterministic interrupt response and large code footprint matter more than raw MHz. The MC9S12GC96MFUE occupies the low-cost tier of the HCS12 family, offering 96KB Flash plus on-chip RAM for typical motor-control and body-comfort applications. Key features include 96KB (96K x 8) Flash for program storage, an HCS12 16-bit core running from an internal 25MHz oscillator (with on-chip PLL options supporting up to 50MHz bus speed), a 2.35V to 2.75V single supply range, and 60 general-purpose I/O pins. The device integrates CAN, SCI, SPI, I2C, an 8-channel 10-bit ADC, PWM timers, and an integrated voltage regulator (VREG) for direct 5V automotive battery operation. The QFP-80 (14x14mm) package is a low-profile plastic quad flat pack designed for through-hole-style surface mounting, allowing easy hand-prototyping and wave-soldered production. On-chip debug (BDM - Background Debug Mode) and a single-wire ICE interface are supported across the family. The 'M' suffix in MPN indicates the operating temperature range (-40C to +125C). Typical applications include automotive body controllers (door modules, seat controllers, mirror control), HVAC actuators, lighting controllers, industrial sensor interfaces, and appliance control boards. The device fits designs that need 16-bit performance with CAN bus connectivity but where the larger S12XE is overkill on cost or Flash. Designers should note that the 2.5V core requires the on-chip voltage regulator to be enabled with proper decoupling; bypass capacitors near VDD/VSSX pins are critical for ADC accuracy. This page synthesizes NXP datasheet specifications, distributor pricing, same-family drop-in variants, and practical design notes not aggregated on standard distributor product pages.

Cotización Contacto
MC9S12GC96MPBE - 16-Bit 25MHz 96KB Flash HCS12 MCU | NXP
MC9S12GC96MPBE

MC9S12GC96MPBE - 16-Bit 25MHz 96KB Flash HCS12 MCU | NXP

The NXP MC9S12GC96MPBE is a 16-bit HCS12 microcontroller featuring 96KB of on-chip Flash memory and a 25MHz bus clock, housed in a 52-pin LQFP (10x10 mm) package. It integrates the HCS12 CPU core with background debug mode (BDM), 4KB RAM, 1KB EEPROM, and a rich peripheral set including a 16-channel 10-bit ADC, multiple timers, SPI/SCI/I2C communication interfaces, and a CAN 2.0 A/B controller for industrial and automotive networking. A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash for code, RAM for data, EEPROM for non-volatile parameters), and programmable I/O peripherals. The HCS12 belongs to the 16-bit MCU family in the broader hierarchy of microcontrollers -> embedded processors -> semiconductors, designed for deterministic real-time control in cost-sensitive embedded applications. Key features include 60 general-purpose I/O lines, an enhanced capture timer (ECT) module with 8 channels, an 8-channel pulse-width modulator (PWM), and a supply voltage range of 2.35V to 2.75V (3.3V typical). The device supports in-circuit programming and in-application programming via the BDM interface, allowing firmware updates without removing the chip from the board. The architecture uses a 16-bit HCS12 core with a 25 MHz bus clock delivering approximately 25 MIPS, paired with a peripheral coprocessor bus that offloads ADC, timer, and communication tasks from the CPU. The integrated CAN 2.0 controller and SCI/SPI make it well suited for industrial automation nodes that must bridge sensor networks to higher-level controllers. Typical applications include industrial control nodes, automotive body electronics, CAN-based sensor hubs, motor control boards, and consumer appliance controllers. The 10-bit ADC and PWM modules support direct interfacing with analog sensors and brushed DC or stepper motor drive stages. Design tip: provide a clean 3.3V analog supply (AVDD) decoupled with 100 nF and 10 uF ceramic capacitors placed within 5 mm of the AVDD pin to preserve ADC accuracy; route digital return currents away from the analog ground reference. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12H128VFVE - 16-bit HCS12 MCU, 128KB Flash, CAN, QFP-144 | NXP
MC9S12H128VFVE

MC9S12H128VFVE - 16-bit HCS12 MCU, 128KB Flash, CAN, QFP-144 | NXP

The NXP Semiconductors MC9S12H128VFVE is a 16-bit HCS12 microcontroller unit (MCU) featuring 128 KB of on-chip Flash, 50 MHz HCS12 CPU core operation, and an integrated LCD controller, housed in a 144-pin LQFP (20x20 mm) package for industrial-grade automotive and consumer applications. An HCS12 microcontroller is a 16-bit CISC MCU family from NXP (originally Motorola/Freescale) targeting automotive body and chassis electronics, industrial control, and consumer appliances. Within the broader taxonomy, an HCS12 sits at: HCS12 microcontroller -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The HCS12 instruction set is upward-compatible with the HC11 and HC08 families, which makes porting legacy 8-bit firmware straightforward while doubling addressable performance. The 'H' sub-family emphasizes segment-LCD glass driving, CAN connectivity, and high-noise-immunity analog integration, suiting it for instrument clusters, HVAC panels, and small appliances. Key features include 128 KB Flash program memory, 4 KB EEPROM, 6 KB SRAM, two CAN 2.0A/B modules, two SCI (UART) channels, one SPI, one IIC (I2C) bus, an 8-channel 10-bit ADC, an integrated LCD driver, PWM channels, and up to 99 general-purpose I/O lines. The HCS12 core delivers 50 MHz bus speed with single-cycle multi-byte instructions, while integrated peripherals include a periodic interrupt timer (PIT), real-time interrupt (RTI), watchdog, and power-on reset. Architecturally, the MC9S12H128 uses a von Neumann bus with a background debug mode (BDM) for non-intrusive in-circuit programming and debugging. The on-chip oscillator with PLL generates the 50 MHz system clock from a low-cost 4 MHz crystal, reducing BOM cost. The integrated CAN 2.0A/B controllers support both standard and extended identifiers, making the part well-suited for in-vehicle networking. Typical applications include automotive instrument clusters (with LCD glass), HVAC control panels, body controllers, industrial operator panels with LCD, security system keypads, small-engine ECUs, and consumer white goods with CAN connectivity. The wide operating temperature range of -40C to +105C allows deployment under-the-hood and in industrial cabinets. When designing with this MCU, allocate the LQFP-144 footprint on a 4-layer PCB with a solid ground pour under the exposed pad. Decouple VDDR/VSS with 100 nF ceramic capacitors placed within 3 mm of each supply pin, and reserve the IRQ and XIRQ lines for noise-immune interrupt sources. This page consolidates distributor pricing for the MC9S12H128VFVE, lists NXP and pin-compatible HCS12 drop-in alternatives, and adds practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12H128VPVE - 16-bit HCS12 MCU 128KB Flash 50MHz | NXP
MC9S12H128VPVE

MC9S12H128VPVE - 16-bit HCS12 MCU 128KB Flash 50MHz | NXP

The NXP MC9S12H128VPVE is a 16-bit HCS12 CISC microcontroller with 128KB of on-chip Flash program memory, 6KB of RAM, and a maximum CPU bus frequency of 50MHz, housed in a 112-pin LQFP (20x20 mm) package. It is part of the S12 family and is targeted at automotive and industrial embedded applications that require deterministic 16-bit performance, CAN connectivity, and on-chip LCD support. A microcontroller is a self-contained computing system on a single IC, integrating a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of analog and digital peripherals into one package. Within the semiconductor hierarchy, the MC9S12H128VPVE belongs to the class of microcontrollers (MCUs), then to 16-bit CISC microcontrollers, then to the automotive-grade HCS12 family, and finally to the H128 sub-family. Its role in the system hierarchy is to act as the central real-time control element, executing firmware that drives actuators, samples sensors, and manages communication buses. The key differentiating features of the MC9S12H128VPVE include: 128KB of in-application programmable Flash (128K x 8 organization), 6KB of RAM, 85 general-purpose I/O lines, an on-chip LCD driver, and a peripheral set that includes PWM, an ATD (analog-to-digital) converter, a watchdog timer, and power-on reset. Communications interfaces include CAN (CANbus), I²C, SCI (UART), and SPI, making the device suitable for multi-bus industrial nodes. The HCS12 core is a 16-bit CISC architecture with a 20-bit ALU, an enhanced indexable addressing mode set, and a Background Debug Mode (BDM) interface for non-intrusive in-circuit debugging. The bus can be clocked up to 50MHz from an internal PLL synthesizer, while the on-chip oscillator and a Phase-Locked Loop provide a stable system clock without an external crystal in many configurations. The 112-pin LQFP package provides sufficient I/O and ADC channels for body-electronics modules. Typical applications include automotive body controllers, instrument clusters with on-chip LCD drive, HVAC control modules, industrial CAN nodes, and general-purpose 16-bit embedded control. The integrated LCD driver makes the device a strong fit for human-driven dashboards and operator interfaces where display cost is a factor. When designing with this part, engineers should size the decoupling network for the multiple VDD/VSS pins, route the LCDFP/LCDRP LCD bias pins with low-impedance traces, and verify the BDM (Background Debug Mode) pins are accessible for production programming. Operating voltage is 2.5V or 5V per the datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for part evaluation, BOM risk reduction, and lifecycle planning.

Cotización Contacto
MC9S12H256VFVE - 16-Bit 256KB Flash HCS12 MCU | NXP | 144-LQFP (Tape & Reel)
MC9S12H256VFVE

MC9S12H256VFVE - 16-Bit 256KB Flash HCS12 MCU | NXP | 144-LQFP (Tape & Reel)

The NXP MC9S12H256VFVE is a 16-bit HCS12 CISC microcontroller with 256KB (256K x 8) of on-chip FLASH program memory and 12KB of data RAM, housed in a 144-pin LQFP (20x20 mm) package with tape-and-reel packaging. The CPU12 core runs at up to 16 MHz and integrates rich automotive-grade peripherals including CANbus (2x), two analog timer modules, SCI, SPI and I2C communication interfaces, plus LCD driver, PWM, POR and watchdog functionality. What is an HCS12 microcontroller? The HCS12 is NXP's (originally Motorola/Freescale) 16-bit CISC microcontroller family targeting automotive body, chassis and gateway applications. It belongs to the broader MCU hierarchy of microcontroller -> embedded MCU -> 16-bit MCU -> automotive-grade MCU -> semiconductor IC. The HCS12 architecture evolved from the HC11 and HC12 families and is widely second-sourced in automotive designs because of its mature toolchain and proven reliability. Key features include 256KB of in-application programmable FLASH, 4KB EEPROM emulation, 12KB RAM, 99 digital I/O pins routed to the LQFP-144 footprint, and an integrated LCD driver capable of supporting segment displays. The dual-CAN interface enables gateway and body-control networks, while the on-chip LCD module reduces BOM in instrument-cluster designs. Typical applications for this part include automotive instrument clusters, body controllers, HVAC panels, gateway modules, industrial CAN nodes, and LCD-based human-machine interfaces. The automotive AEC-Q100 qualification and 2.5V/5V dual-voltage I/O make it suitable for 12V automotive power systems. When designing with the MC9S12H256VFVE, ensure the VREG is bypassed with a 100 nF + 4.7 uF combination as recommended in the Freescale/NXP device user guide, and that the PLL loop filter network follows the reference schematic to keep jitter within spec. This page synthesizes verified distributor pricing, AEC-Q100-qualified alternatives, and PCB-layout notes not always present in the device user guide - giving procurement engineers and firmware developers a single source for evaluating this part against its HCS12 siblings.

Cotización Contacto
MC9S12H256VFVER - 16-Bit 256KB Flash HCS12 MCU | NXP | 144-LQFP
MC9S12H256VFVER

MC9S12H256VFVER - 16-Bit 256KB Flash HCS12 MCU | NXP | 144-LQFP

The NXP MC9S12H256VFVER is a 16-bit HCS12 CISC microcontroller with 256KB (256K x 8) of on-chip FLASH program memory and 12KB of data RAM, housed in a 144-pin LQFP (20x20 mm) package with tape-and-reel packaging. The CPU12 core runs at up to 16 MHz and integrates rich automotive-grade peripherals including CANbus (2x), two analog timer modules, SCI, SPI and I2C communication interfaces, plus LCD driver, PWM, POR and watchdog functionality. What is an HCS12 microcontroller? The HCS12 is NXP's (originally Motorola/Freescale) 16-bit CISC microcontroller family targeting automotive body, chassis and gateway applications. It belongs to the broader MCU hierarchy of microcontroller -> embedded MCU -> 16-bit MCU -> automotive-grade MCU -> semiconductor IC. The HCS12 architecture evolved from the HC11 and HC12 families and is widely second-sourced in automotive designs because of its mature toolchain and proven reliability. Key features include 256KB of in-application programmable FLASH, 4KB EEPROM emulation, 12KB RAM, 99 digital I/O pins routed to the LQFP-144 footprint, and an integrated LCD driver capable of supporting segment displays. The dual-CAN interface enables gateway and body-control networks, while the on-chip LCD module reduces BOM in instrument-cluster designs. Typical applications for this part include automotive instrument clusters, body controllers, HVAC panels, gateway modules, industrial CAN nodes, and LCD-based human-machine interfaces. The automotive AEC-Q100 qualification and 2.5V/5V dual-voltage I/O make it suitable for 12V automotive power systems. When designing with the MC9S12H256VFVER, ensure the VREG is bypassed with a 100 nF + 4.7 uF combination as recommended in the Freescale/NXP device user guide, and that the PLL loop filter network follows the reference schematic to keep jitter within spec. This page synthesizes verified distributor pricing, AEC-Q100-qualified alternatives, and PCB-layout notes not always present in the device user guide - giving procurement engineers and firmware developers a single source for evaluating this part against its HCS12 siblings.

Cotización Contacto
MC9S12H256VPVE - 16-bit 50MHz HCS12 MCU 256KB Flash LQFP-112 | NXP
MC9S12H256VPVE

MC9S12H256VPVE - 16-bit 50MHz HCS12 MCU 256KB Flash LQFP-112 | NXP

The NXP (formerly Freescale) MC9S12H256VPVE is a 16-bit HCS12 microcontroller built around the HCS12 CPU core, delivering 50 MHz of processing performance with 256 KB of on-chip Flash memory in a 112-pin LQFP (20x20 mm) package. According to the NXP product page, this device integrates standard on-chip peripherals and is engineered for cost-sensitive automotive and industrial body and chassis applications that demand robust CAN connectivity, analog sensing and PWM control. The 'VPVE' suffix denotes the 112-LQFP package with the -40 °C to +105 °C automotive-grade operating temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory (Flash), and a rich set of peripherals such as timers, ADC, communication controllers and general-purpose I/O. The HCS12 microcontroller family sits in the broader taxonomy of microcontroller -> embedded controller -> semiconductor IC. HCS12 devices use a 16-bit data path, a programmable PLL for clock scaling, and on-chip Enhanced Capture Timer, PWM, SCI, SPI, IIC and CAN (msCAN) modules, allowing designers to consolidate what would otherwise require multiple discrete components onto a single die. Key features of the MC9S12H256VPVE include 256 KB of third-generation Flash with security and EEPROM emulation capability, 12 KB of on-chip RAM, 4 KB of EEPROM, a 10-bit analog-to-digital converter, two msCAN (CAN 2.0A/B) modules for automotive networking, two SCI, two SPI and one IIC peripheral, an 8-channel 16-bit Enhanced Capture Timer, an 8-channel 8-bit or 4-channel 16-bit PWM module, and up to 91 general-purpose I/O pins. The PLL lets the system clock be derived from a low-frequency crystal to reduce EMI while still providing full 50 MHz bus speed on demand. Technically, the HCS12 core uses a 16-bit ALU with a 20-bit address space (1 MB linear), instruction pipelining, and a Background Debug Mode (BDM) interface for non-intrusive in-circuit programming and debug. The integrated voltage regulator accepts 5 V input and generates the internal 2.5 V core supply, simplifying PCB power design. The MC9S12H256 family is qualified to AEC-Q100 specifications and supports STOP and PSEIP pseudofrozen low-power modes that are essential for body-control modules that must wake on CAN or wake-up pins. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, door modules, seat controllers, and industrial CAN nodes where cost, low EMI and a wide temperature range are required. The dual CAN interface is particularly important for in-vehicle networking where multiple sub-buses must be bridged. The same architecture is also found in agricultural equipment, building automation and solar inverter peripheral controllers. When designing with this device, allocate sufficient PCB copper to the exposed thermal pad and route the oscillator traces with short, symmetric lengths. Be aware that the PLL configuration bits, Flash security bytes and the COP watchdog must be configured during initialization, and that the on-chip regulated 2.5 V cannot be loaded externally. Always consult the latest MC9S12H256 reference manual for the specific register map, interrupt vector layout and BDIV divider settings for your target bus frequency. This page synthesizes NXP product-page data, distributor pricing and verified cross-references not collected in any single manufacturer document, providing a one-stop engineering and procurement reference.

Cotización Contacto