Microcontroladores

Productos (20.000+)

MC9S12DT128MPV - 16-bit HCS12 MCU, 128KB Flash, 112-LQFP | NXP
MC9S12DT128MPV

MC9S12DT128MPV - 16-bit HCS12 MCU, 128KB Flash, 112-LQFP | NXP

The NXP MC9S12DT128MPV is a 16-bit HCS12 CISC microcontroller with 128KB Flash memory, 2.5V/5V operating voltage, and a 112-pin LQFP package, designed for automotive multiplexing applications. The part features two asynchronous serial communications interfaces, an 8-channel IC/OC enhanced capture timer, two 8-channel 10-bit analog-to-digital converters, an 8-channel pulse-width modulator, and 20 discrete digital I/O lines. Operating temperature grade is automotive (-40C to +125C), making it suitable for harsh under-hood and chassis environments. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash, RAM, EEPROM), and on-chip peripherals into a single device used to control embedded systems. Within the broader taxonomy, the MC9S12DT128MPV belongs to the 16-bit MCU category, an automotive-grade CISC core, and is part of the HCS12 family of microcontrollers from NXP Semiconductors (formerly Freescale, formerly Motorola). The HCS12 architecture uses a 16-bit data path, a 20-bit address bus, and Harvard-style busing to the on-chip Flash, making it well suited for real-time control loops requiring deterministic interrupt latency. Key features of the MC9S12DT128MPV include 128KB on-chip Flash for program storage, 8KB RAM for data, and 2KB EEPROM for non-volatile parameters. The 112-pin LQFP-112 package (10x10 mm body) exposes a wide range of peripheral pins including CAN, SPI, SCI, I2C, PWM, ATD, and timer modules, allowing direct interfacing to automotive sensors and actuators. Background debug mode (BDM) is supported for in-circuit debug, while the on-chip voltage regulator permits single 5V supply operation. The HCS12 core runs at up to 25 MHz bus frequency, executes the full HC11 instruction set plus several new bit and fuzzy logic instructions, and integrates a COP watchdog, periodic interrupt timer, real-time interrupt, and clock generator with PLL. Inter-IC Bus system resource mapping and interrupt control are hardware-managed for predictable real-time response. Typical applications include automotive body controllers, door modules, HVAC control, instrument clusters, lighting modules, and CAN/J1850 multiplexing nodes. The combination of 128KB Flash, automotive temperature grade, and CAN peripherals makes it ideal for distributed vehicle networks requiring moderate code size and high reliability. Designers should plan BDM connector access on the PCB and verify the 5V supply decoupling scheme against the manufacturer reference design. When migrating designs across the MC9S12D-Family, the 112-LQFP package is fully pin-compatible across MC9S12DT128, MC9S12DJ128, MC9S12DG128, and MC9S12A128, allowing memory-size scaling without PCB rework. This page synthesizes distributor stock, AEC-Q100 temperature grading, drop-in MC9S12D-Family alternatives, and practical automotive design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12DT128MPVE - 16-bit HCS12 MCU, 128KB Flash, LQFP-112 | NXP
MC9S12DT128MPVE

MC9S12DT128MPVE - 16-bit HCS12 MCU, 128KB Flash, LQFP-112 | NXP

The NXP MC9S12DT128MPVE is a 16-bit HCS12 (S12D family) flash microcontroller delivering 128KB of on-chip flash program memory, 8KB RAM, and 2KB EEPROM, running at up to 25 MHz in a 112-pin LQFP (20x20 mm) surface-mount package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripheral functions such as timers, serial interfaces, and analog-to-digital converters. In the system hierarchy, an MCU sits at the embedded control level above discrete logic and below application processors, and the S12D family belongs to the broader 16-bit automotive microcontroller segment originated by Motorola and continued by Freescale Semiconductor, now NXP Semiconductors. Key features of the MC9S12DT128 include two asynchronous serial communications interfaces (SCI), an 8-channel input capture/output capture enhanced capture timer, two 8-channel 10-bit ADCs, an 8-channel pulse-width modulator, 91 discrete I/O lines, and an Inter-IC (IIC) bus. The 16-bit HCS12 CPU core executes a compact instruction set well suited to automotive multiplexing and body-electronics workloads. Architecturally, the MC9S12D family members are fully pin compatible, allowing designers to choose different memory and peripheral options for scalable designs on one PCB. The device operates from a 2.35V to 5.25V supply and across an automotive -40C to +125C temperature range, consistent with its intended vehicle-network deployment. Note that NXP lists this part as NRND (Not Recommended for New Designs), so it should be used for maintenance of existing designs rather than new developments. Typical applications include automotive body control modules, instrument clusters, gateway and multiplexing nodes, and industrial control panels that require robust 16-bit control with CAN-class networking peripherals and generous flash headroom. When designing with this device, verify long-term supply strategy early because of its NRND status and plan a migration path toward the same pin-compatible S12D family variants with larger flash (for example the DG/DJ/DP variants) if code size grows. This page synthesizes distributor pricing tiers, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with all data verified against NXP, DigiKey, Mouser, and Octopart listings as of 2026-10-18.

Cotización Contacto
MC9S12DT128VPVE - 16-bit HCS12 MCU 128KB Flash LQFP-112 | NXP
MC9S12DT128VPVE

MC9S12DT128VPVE - 16-bit HCS12 MCU 128KB Flash LQFP-112 | NXP

The NXP Semiconductors MC9S12DT128VPVE is a 16-bit HCS12 (S12DT family) flash microcontroller with 128KB (128K x 8) on-chip flash memory, a 25 MHz bus capability, and 91 general-purpose I/O lines, housed in a 112-pin LQFP (20x20 mm) surface-mount package. A 16-bit microcontroller unit (MCU) integrates a processor core, program memory, data memory, and peripherals on a single chip, sitting within the broader hierarchy of semiconductor devices as an embedded processor within the microcontroller family. The HCS12 (S12) architecture is an enhanced evolution of the classic 68HC12 CISC core, widely deployed in automotive body electronics, industrial control, and multiplexed networking nodes where CAN and serial connectivity are required. Key features of the MC9S12DT128 include two asynchronous serial communications interfaces (SCI), an 8-channel input capture/output capture enhanced capture timer, two 8-channel 10-bit analog-to-digital converters (ADC), an 8-channel pulse-width modulator (PWM), discrete digital I/O lines, and an Inter-IC Bus (IIC). The DT variant of the S12D family provides 128KB of flash program memory with in-system programmability for field updates. Architecturally, the S12 core uses system resource mapping, clock generation, interrupt control, and bus interfacing modules designed for automotive multiplexing applications. Members of the MC9S12D family are fully pin compatible, enabling designers to scale memory and peripheral options without PCB redesign. The VPVE temperature/voltage grade suffix targets extended industrial operating ranges with 5V supply operation. Typical applications include automotive body control modules, dashboard clusters, gateways on CAN networks, industrial motor control panels, and building automation controllers. The rich peripheral set (dual ADC, PWM, SCI, CAN) makes it a single-chip solution for sensor acquisition and actuator drive. When designing with this device, verify bus clock configuration against the crystal or PLL reference, and budget the 91 I/O lines for multiplexed pin functions since many pins are shared between ADC, timer, and communication peripherals. Note that NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate S12G or S12XE successors. This page synthesizes distributor pricing, drop-in alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12DT256CMPV - 16-Bit 50MHz Automotive MCU, 256KB Flash | NXP
MC9S12DT256CMPV

MC9S12DT256CMPV - 16-Bit 50MHz Automotive MCU, 256KB Flash | NXP

The NXP (formerly Freescale / Motorola) MC9S12DT256CMPV is a 16-bit HCS12-family Flash microcontroller running at up to 50 MHz bus speed, packaged in a 112-pin LQFP with automotive temperature grade. It integrates 256 KB of on-chip Flash, 12 KB RAM, and 4 KB EEPROM, and is engineered for automotive multiplexing and body-electronics applications where deterministic real-time response and on-chip peripheral integration are required. What is an HCS12 microcontroller? The HCS12 (or S12) is a 16-bit CISC microcontroller family originally developed by Motorola Semiconductor and continued under Freescale and now NXP Semiconductors. It belongs to the broader microcontroller hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> automotive-grade MCU. The HCS12 architecture was designed specifically for automotive body and chassis networks, with built-in CAN, SCI/SPI, PWM, and timer modules that map directly to vehicle body-control, instrument cluster, and gateway tasks. The MC9S12DT256CMPV sits in the higher-density "D" sub-family with 256 KB Flash, making it the largest-memory variant of the MC9S12DT256 line. Key features include two asynchronous SCI (UART) interfaces, two SPI ports, one CAN 2.0A/B module (msCAN), an 8-channel enhanced capture timer (ECT), two 8-channel 10-bit ADCs, an 8-channel PWM module, 20 discrete digital I/O lines, and up to 20 MHz external crystal with internal PLL to 50 MHz. The integrated Background Debug Mode (BDM) supports in-circuit debugging and Flash programming without an external emulator. Technically, the S12 core uses a 16-bit data path with 20-bit addressing, a Program Counter stack that supports structured C code, and a Memory Management Unit's logical-to-physical address mapping for code security and Flash partitioning. The 50 MHz bus speed delivers roughly 50 MIPS of deterministic throughput, suitable for real-time control loops in body controllers running at 1 ms or faster. Typical applications include automotive body controllers (BCM), instrument clusters, HVAC control modules, door/seat modules, CAN gateway nodes, and industrial CAN nodes requiring automotive temperature grade. Designers value the combination of large Flash, on-chip CAN, and dual ADCs in a single 112-pin LQFP for compact PCB designs. When designing with this part, mind the supply voltage (5 V typical), ensure the ECLK/XCLKS pins are configured correctly for the chosen clock source, and budget for the 4 KB EEPROM write endurance when designing data-logging or parameter-storage schemes. Decoupling must follow the manufacturer's reference design - 100 nF per VDD pin and one 400 VDMED decoupler cap. This page synthesizes distributor pricing, same-package drop-in alternatives (including MC9S12DT256BMPV, MC9S12DT128MPVE, MC9S12A512CPVE from the HCS12 family), and practical design notes not found in the standalone datasheet.

Cotización Contacto
MC9S12DT256CPVE - 16-bit HCS12 MCU 256KB Flash | NXP LQFP-112
MC9S12DT256CPVE

MC9S12DT256CPVE - 16-bit HCS12 MCU 256KB Flash | NXP LQFP-112

The NXP MC9S12DT256CPVE is a 16-bit HCS12 CISC microcontroller with 256KB internal Flash, 12KB RAM, 4KB EEPROM, and 91 general-purpose I/O pins, packaged in a 112-pin LQFP (20x20 mm) and operating up to 25MHz. An HCS12 microcontroller is a member of the Freescale/NXP 16-bit MCU family built on the CPU12 core, combining a CISC instruction set with on-chip peripherals such as timers, ADC, PWM, and multiple serial interfaces. In the broader hierarchy, HCS12 sits between classic HC11/HC12 8-bit/16-bit microcontrollers and modern 32-bit ARM Cortex-M devices - the HCS12 family targets automotive multiplexing, body and chassis ECUs, and industrial control applications that need deterministic interrupt response and large on-chip memory. The DT256 sub-family is fully pin-compatible with the wider S12D family, letting designers scale memory and peripherals without re-laying out the PCB. The MC9S12DT256CPVE integrates 2x SCI (UART), SPI, I2C, CAN, an 8-channel 10-bit ADC, an 8-channel enhanced capture timer, an 8-channel PWM, and 91 discrete digital I/O lines. Its supply voltage spans 2.35V to 2.75V core (with 5V-tolerant I/O typical of S12 designs). BDM (Background Debug Mode) and on-chip COP watchdog support automotive-grade development flows. The device uses the HCS12 CPU12 core with a 25MHz bus, executing CISC instructions and supporting up to 4KB EEPROM and 256KB Flash for application code plus 12KB RAM for variables. The integrated CAN, SCI, and SPI controllers enable automotive multiplexing and industrial networking, while the 8-channel PWM and 10-bit ADC provide mixed-signal I/O for sensor and actuator interfaces. Typical applications include automotive body controllers, CAN/J1939 nodes, HVAC modules, industrial PLCs, and 16-bit replacement of older HC11/HC12 designs. It is widely used where 5V I/O tolerance and deterministic CAN messaging are mandatory. Designers should budget PCB space for the LQFP-112 footprint, use external decoupling on VDD/VSSX pairs, and follow NXP's EMC/ESD layout guidelines. The 'CPVE' suffix denotes the 112-pin LQFP commercial grade (0-70C) vs. MPVE -85C; verify temperature grade before layout. This page synthesizes distributor pricing, drop-in pin-compatible S12 family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12DT256MFUE - 16-Bit 25MHz 256KB Flash MCU | NXP | 80-QFP
MC9S12DT256MFUE

MC9S12DT256MFUE - 16-Bit 25MHz 256KB Flash MCU | NXP | 80-QFP

The NXP MC9S12DT256MFUE is a 16-bit HCS12 (CPU12) Flash-based microcontroller from the BARRACUDA4 / MC9S12DB-Family designed for automotive multiplexing applications, with 256KB of Flash memory, 25MHz bus frequency, and housed in an 80-pin QFP (14x14) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/ROM, RAM), and programmable peripherals. The HCS12 family belongs to the broader category of 16-bit embedded microcontrollers, sitting between 8-bit legacy MCUs (68HC11/HC08) and 32-bit ARM Cortex-M devices in NXP's automotive roadmap. Within the power-management and embedded hierarchy, the MC9S12DT256MFUE functions as an embedded processor and controller, integrating computation, non-volatile storage, and on-chip peripherals in a single package. Key features of the MC9S12DT256MFUE include 256KB on-chip Flash, 12KB RAM, 4KB EEPROM, an HCS12 CPU12 core running up to 25MHz (some sources cite 50MHz core clock with 25MHz bus), up to 91 I/O ports, CAN 2.0 interface, SCI/SPI/IIC serial interfaces, 8-channel 16-bit PWM, 16-channel 10-bit ADC, and an integrated 4-channel BDLC (Byte Data Link Communication) module for LIN/J1850 body-comfort networking. The wide 2.35V-2.75V core supply (with 5V-tolerant I/O via VDDR/VSSR) supports automotive 12V-battery transient environments through external regulators. Architecturally, the HCS12 core uses a CISC instruction set with background-debug mode (BDM), making in-circuit flash programming and on-chip debug straightforward. The die combines EEPROM emulation-friendly Flash, configurable timer modules (ECT, TIM), and an MSCAN module that simplifies Class B networking nodes such as body control modules (BCMs), instrument clusters, and door/seat/lighting nodes. Typical applications include automotive body and chassis multiplexing (BCM, door modules, instrument clusters, HVAC, seat controllers), industrial CAN nodes, and LIN-mastered sub-networks. The wide operating temperature range and AEC-Q100-equivalent qualification tier make it suitable for under-hood and passenger-compartment deployments. Designers should note that the 80-pin QFP package requires careful PCB layout for the exposed-pad thermal connection; decoupling must follow NXP's AN2.1B-style reference design with bulk + bypass capacitors on both core and I/O rails. The part is rated mature for endurance and is widely second-sourced through the Freescale-NXP legacy portfolio. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond the standard manufacturer datasheet for engineers evaluating the MC9S12DT256MFUE in legacy automotive and industrial CAN designs.

Cotización Contacto
MC9S12DT256MPVE - 16-bit HCS12 MCU, 256KB Flash, 112-LQFP | NXP
MC9S12DT256MPVE

MC9S12DT256MPVE - 16-bit HCS12 MCU, 256KB Flash, 112-LQFP | NXP

The NXP MC9S12DT256MPVE is a 16-bit HCS12 microcontroller with 256KB of on-chip Flash memory and a 112-pin LQFP package (20x20 mm), belonging to NXP's S12DT family of automotive-grade microcontrollers. It integrates the HCS12 CPU core running at up to 25 MHz (with internal bus speeds up to 50 MHz), two asynchronous serial communication interfaces (SCI), two SPI modules, an 8-channel IC/OC enhanced capture timer (ECT), two 8-channel 10-bit analog-to-digital converters (ATD), and 91 general-purpose I/O pins. The device also includes 12 KB of RAM and 4 KB of EEPROM for non-volatile data storage. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals such as timers, ADCs, and communication interfaces. The HCS12 family belongs to the 16-bit MCU category, sitting between 8-bit microcontrollers (e.g., HC08, S08) and 32-bit ARM Cortex-M microcontrollers, and is widely used in automotive body, chassis, and powertrain applications where deterministic interrupt response and rich peripheral integration matter more than raw clock speed. Key features include 256KB Flash for application code, 12KB RAM, 4KB EEPROM, two SCI, two SPI, an I2C-bus-compatible module, an 8-channel 16-bit enhanced capture timer, two 10-bit ATDs with 8 channels each, CAN 2.0A/B-compatible MSCAN module, and JTAG/BDM debug interface. The 112-LQFP package supports the full peripheral complement and 91 GPIO pins, while the wide 2.35V-2.75V supply is paired with internal voltage regulation. The HCS12 core implements a CISC architecture with 16-bit ALU, X/Y index registers, and a von-Neumann memory map (unified Flash/RAM/EEPROM addressing). Background Debug Mode (BDM) allows non-intrusive in-circuit debugging and Flash programming via a single-pin interface, simplifying production test. The CAN (MSCAN) peripheral supports both standard (11-bit) and extended (29-bit) identifier frames, with programmable bit timing for bus rates up to 1 Mbps, suitable for automotive CAN networks. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, lighting modules, CAN nodes in vehicle networks, and industrial automation nodes requiring 16-bit processing, deterministic interrupts, and field-upgradeable Flash. The S12DT family is fully pin-compatible across derivatives, enabling scalable designs with different memory and peripheral mixes. When designing with this part, allocate a robust watchdog refresh strategy and verify the BDM/debug pinout matches your programming fixture. The 112-LQFP package requires a 4-layer PCB with adequate thermal copper for production programming, and decoupling capacitors must be placed within 5 mm of each supply pin per NXP guidelines. This page synthesizes distributor pricing, lifecycle status, same-package drop-in alternatives (S12 family variants and the XDT256 upgrade), and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12DT256VPVE - 16-bit HCS12 MCU, 256KB Flash, 112-LQFP | NXP
MC9S12DT256VPVE

MC9S12DT256VPVE - 16-bit HCS12 MCU, 256KB Flash, 112-LQFP | NXP

The NXP MC9S12DT256VPVE is a 16-bit HCS12 microcontroller with 256KB on-chip Flash, 12KB RAM and 4KB EEPROM, integrated in a 112-pin LQFP (20x20 mm) package. It belongs to the S12DT family of Flash-based MCUs originally designed for automotive multiplexing applications, where pin compatibility across memory and peripheral variants enables scalable designs. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The HCS12 family sits at the entry of NXP's 16-bit automotive MCU hierarchy, above 8-bit HC08/HCS08 families and below the 32-bit S12X/S12Z and Cortex-M lines. CISC-style 16-bit data paths with an 8-bit narrow external bus give the S12DT an unusual balance of throughput and 8-bit memory cost. Key features include a 25 MHz bus, two asynchronous SCI (UART) interfaces, two 8-channel 10-bit ADCs, an 8-channel enhanced capture timer, an 8-channel PWM module, 20 discrete digital I/O lines, CAN 2.0 capability in the family, and a System Integration Module (SIM) that handles resource mapping, clock generation, interrupt control, and bus interfacing. The on-chip PLL and oscillator simplify external clocking. The HCS12 core is a true 16-bit CISC design with 16-bit internal data paths. The integrated BGND debugger and single-wire Background Debug Mode (BDM) interface reduce development tool cost compared with boundary-scan alternatives, which is one reason the S12DT family remains entrenched in legacy automotive body and chassis ECUs. Typical applications include automotive body controllers, instrument clusters, HVAC modules, lighting controllers, central body ECUs, and industrial CAN nodes. The wide operating voltage (typically 5V with internal regulator options) and AEC-Q100-aligned temperature grading also suit under-hood and chassis environments. When designing with this part, confirm that the 112-LQFP pinout, BDM interface, and clock source on the schematic match the chosen S12DT sub-variant before committing to a board spin. Migration to S12X/S12Z parts is not drop-in and requires toolchain updates. This page synthesizes distributor pricing, pin-compatible alternatives within the S12DT family, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12DT512CPVE - 16-Bit 25MHz 512KB Flash MCU | NXP
MC9S12DT512CPVE

MC9S12DT512CPVE - 16-Bit 25MHz 512KB Flash MCU | NXP

The NXP Semiconductors MC9S12DT512CPVE is a 16-bit HCS12 microcontroller operating at up to 25 MHz, with 512 KB of internal Flash memory and a 112-LQFP package measuring 20 mm by 20 mm. It integrates two asynchronous serial communication interfaces, an 8-channel IC/OC enhanced capture timer, two 8-channel 10-bit ADCs, an 8-channel PWM module, 20 discrete digital I/O lines, and standard bus, clock, interrupt, and Inter-IC Bus resources. The HCS12 is a 16-bit CISC microcontroller family within the embedded processor and microcontroller hierarchy. MCUs integrate a CPU, memory, peripherals, and I/O into one device so embedded systems can execute control software while reading sensors, driving actuators, and communicating with external circuits. The MC9S12DT512CPVE targets applications that require deterministic control, substantial Flash storage, and multiple mixed-signal peripherals. Verified source data identifies the MCU as a 16-bit device with a 25 MHz maximum clock, 512 KB Flash, 112 LQFP pins, 91 I/O ports, and a 2.35 V to 2.75 V supply range. One secondary datasheet result states 50 MHz, but the NXP and distributor results identify 25 MHz; the conflicting 50 MHz value is not used as an authoritative product specification. The package is a square surface-mount LQFP with gull-wing leads, industrial temperature-grade information is reported by one distributor, and lifecycle status is shown as active by the NXP page. The peripheral mix makes the device suitable for industrial and embedded control systems. The two ADC channels provide analog measurement capability, the PWM channels support timing and motor-control functions, and the enhanced capture timer supports input-event measurement. Serial interfaces can connect the MCU to sensors, transceivers, actuators, or service equipment. The 512 KB Flash capacity provides room for application code and firmware updates, although memory-map and bootloader details must be confirmed from the manufacturer documentation. Typical designs place this MCU at the center of a control board with sensor inputs connected to the ADC channels, timers generating control signals, and serial links communicating with external modules. Engineers should verify voltage levels, pin multiplexing, clock configuration, reset behavior, and peripheral instance availability against the official datasheet before final PCB release. A key design consideration is package and signal integrity. The 112-LQFP footprint has fine-pitch leads and requires careful fanout, decoupling, grounding, and assembly planning. The manufacturer product page and datasheet should be consulted for the authoritative pinout, electrical limits, recommended operating conditions, and application circuit. This page consolidates the verified NXP product information, distributor specifications, package details, and cross-reference research into a practical selection reference for engineers evaluating the MC9S12DT512CPVE.

Cotización Contacto
MC9S12E128CFUE - 16-Bit HCS12 MCU, 128KB Flash, 80-QFP | NXP
MC9S12E128CFUE

MC9S12E128CFUE - 16-Bit HCS12 MCU, 128KB Flash, 80-QFP | NXP

The NXP MC9S12E128CFUE is a 16-bit HCS12 microcontroller with 128KB of on-chip Flash, 8KB RAM, and a 25MHz CPU core (50MHz bus) housed in an 80-pin QFP (14x14 mm) package. Designed as a general-purpose automotive MCU, it integrates EBI/EMI, I2C, SCI, and SPI connectivity, plus a 60-pin I/O set, an 8-channel 16-bit PWM, two 8-channel 10-bit ADCs, and a CAN 2.0 controller. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals such as timers, ADCs, and communication controllers. In the embedded hierarchy the MC9S12E128CFUE sits at the intersection of 16-bit microcontroller -> HCS12 family -> automotive-grade MCU -> NXP S12 portfolio, and is widely used where deterministic real-time control and CAN connectivity are required at a moderate clock rate. Key features include 128KB of embedded Flash for application and bootloader storage, 8KB RAM for data and stack, an on-chip phase-locked loop (PLL) that scales an external crystal reference up to the internal 50MHz bus, and an integrated bandgap-based voltage regulator (VREG) that allows single-rail 5V operation. The 16-bit CPU executes the HCS12 instruction set with full 16-bit data paths, delivering more arithmetic headroom than typical 8-bit alternatives while keeping the peripheral set easy to program. The MC9S12E128CFUE architecture centers on a Von-Neumann-style bus with cross-bar switches that let the CPU, DMA-like background debug mode (BDM), and peripherals arbitrate for memory bandwidth. The PLL lets engineers trade power consumption against performance by lowering the bus frequency in standby. With 60 general-purpose I/Os, an 8-channel PWM and dual ADCs, the part supports multi-sensor automotive and industrial control loops without external glue logic. Typical applications include body controllers (BCM), HVAC actuators, instrument clusters, door modules, and industrial sensor hubs. Designers select this part when they need CAN bus connectivity, robust PWM channels for motor or lighting control, and a mature HCS12 tool chain including CodeWarrior and GCC. When designing with the MC9S12E128CFUE, ensure decoupling capacitance on VDDR/VSS as specified in the S12E reference manual and route the PLL filter network (XFC pin) with short, guarded traces. The 80-QFP package is footprint-compatible with the rest of the MC9S12E family, simplifying migration between memory sizes on the same PCB. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12E128MFUE - 16-bit HCS12 MCU 128KB Flash 25MHz | NXP
MC9S12E128MFUE

MC9S12E128MFUE - 16-bit HCS12 MCU 128KB Flash 25MHz | NXP

The NXP Semiconductors MC9S12E128MFUE is a 16-bit HCS12 (S12E family) microcontroller with 128KB of FLASH program memory, a maximum core/bus speed of 25 MHz, and an 80-pin QFP (14x14 mm) surface-mount package. It is part of the cost-effective, general-purpose MC9S12E Moray Eel family designed for automotive and industrial embedded control. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. Within the semiconductor hierarchy, the MC9S12E128MFUE belongs to the 16-bit microcontroller class, within the broader HCS12/S12 product line from Freescale (now NXP), which itself descends from the 68HC11 legacy architecture widely used in automotive body electronics. Key features include full 16-bit data paths throughout the core, 128KB (128K x 8) of on-chip FLASH for code storage, and an on-chip phase-locked loop (PLL) that lets designers trade clock frequency against power consumption dynamically. The device integrates an on-chip bandgap-based voltage regulator (Vreg), reducing external power components and improving supply robustness in noisy 12V automotive environments. Technically, the S12E family emphasizes integration density over raw speed: the 25 MHz bus derives from a PLL multiplying a lower-frequency crystal or reference, allowing EMC-friendly operation at reduced frequencies when full performance is not required. The FLASH memory is reprogrammable in-system, supporting field firmware updates, and the peripheral set targets body control modules, sensor hubs, and actuator control nodes rather than high-throughput signal processing. Typical applications include automotive body electronics such as door modules, seat control, lighting control, and HVAC actuators, as well as industrial control panels, motor-driven appliances, and general-purpose embedded systems where a robust 16-bit platform with adequate FLASH and mature toolchain support is preferred. When designing with this device, plan bus frequency and PLL settings early, since EMC compliance at 25 MHz requires careful clock routing and decoupling. Note also that NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate successor S12G/S12XS devices or design-in alternatives with a migration plan. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design guidance not found in a single manufacturer datasheet, as of 2026-10-18.

Cotización Contacto
MC9S12E256CFUE - HCS12 25MHz 256KB Flash MCU | NXP | 80-QFP
MC9S12E256CFUE

MC9S12E256CFUE - HCS12 25MHz 256KB Flash MCU | NXP | 80-QFP

The NXP MC9S12E256CFUE is a 16-bit HCS12 microcontroller IC running at 25 MHz with 256 KB (256K x 8) of on-chip Flash EEPROM, 16 KB of RAM, and 4 KB of EEPROM, packaged in an 80-pin QFP (14x14 mm). It integrates three asynchronous SCI modules, one SPI, one IIC bus, three 4-channel 16-bit timer modules (TIM), and a 6-channel 8-bit PWM alongside an 8-channel 10-bit ADC. The part belongs to the low-cost, general-purpose MC9S12E family and is qualified for industrial automotive-style applications operating from a 2.5 V core supply with 5 V-tolerant I/O. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals onto one silicon die. The HCS12 architecture is the 16-bit evolution of NXP/Freescale's HC12 family; it sits in the broader taxonomy of embedded microcontrollers -> microprocessors -> semiconductor ICs. The MC9S12E256CFUE specifically uses the HCS12 CPU core with background debug mode (BDM) for non-intrusive in-circuit development, and its 16-bit registers and rich peripheral set make it well suited to automotive body controllers, industrial sensor aggregators, and consumer appliance control. Key features include: 25 MHz bus speed yielding 25 MIPS of throughput, 256 KB of byte-erasable Flash, 16 KB of RAM and 4 KB of EEPROM, an 8-channel 10-bit ADC with 7 us conversion time, three SCI (UART) modules for multi-node serial networking, one SPI up to 5 MHz, one IIC up to 400 kHz, three TIM/PWM blocks for motor and lighting control, and an on-chip voltage regulator supporting 3.3 V-5 V single-supply operation. The 80-QFP (14x14) footprint provides generous I/O access while keeping PCB area compact. The HCS12 core implements a Von Neumann architecture with a 16-bit ALU, dedicated index registers X/Y/SP/PC, and a hardware multiplier/divider that accelerates DSP-style routines. The device also includes a periodic interrupt timer (PIT) for RTOS tick generation, a watchdog timer, and low-voltage reset to improve field reliability. Background Debug Mode allows flash programming and breakpoints without external probes, reducing manufacturing test cost. Typical applications for the MC9S12E256CFUE include industrial sensor hubs, automotive body and chassis ECUs, HVAC control boards, motor and pump controllers, and consumer appliances. The 256 KB Flash accommodates moderate protocol stacks (CAN, LIN, custom serial), while 16 KB RAM supports buffering for display or network traffic. Design consideration: place decoupling capacitors (100 nF plus 4.7 uF bulk) within 5 mm of every VDD/VSS pair, route the BDM pins to a 6-pin standard debug header, and budget 25 MHz trace length matching when the oscillator drives external loads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Distributor prices below are listed as of 2026-10-18.

Cotización Contacto
MC9S12E256MFUE - 16-bit HCS12 MCU 256KB Flash 80-QFP | NXP
MC9S12E256MFUE

MC9S12E256MFUE - 16-bit HCS12 MCU 256KB Flash 80-QFP | NXP

The NXP MC9S12E256MFUE is a 16-bit HCS12 CISC microcontroller with 256KB Flash EEPROM and 16KB RAM, operating at 25 MHz, housed in an 80-pin LQFP package rated for automotive temperature grades. It integrates three SCI, one SPI, one IIC bus, three 4-channel 16-bit timer modules (TIM), a 6-channel PWM module, and a 10-bit ADC, providing a complete set of on-chip peripherals for general-purpose embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral interfaces into one IC. Within the embedded hierarchy, the MC9S12E256 belongs to the 16-bit automotive-grade MCU class, sitting between 8-bit microcontrollers and 32-bit ARM Cortex-M devices. It targets cost-sensitive applications that require deterministic interrupt latency, CAN-style connectivity, and on-chip analog without the software complexity of an RTOS-driven Cortex platform. Key features include 256KB of byte-erasable Flash EEPROM supporting in-application reprogramming, 60 general-purpose I/O lines, an external bus interface (EBI/EMI) for memory expansion, a periodic interrupt timer, a watchdog timer, and an on-chip voltage regulator for single 5V or 3.3V supply operation. The HCS12 CPU delivers 25 MHz performance with BDM (Background Debug Mode) for non-intrusive in-circuit debugging. The MC9S12E256 family uses a von-Neumann architecture with a 16-bit ALU, 20-bit addressing via PPAGE/GPAGE registers, and hardware-based multiply/divide instructions. The integrated Flash controller supports fast page erase and program operations, and the chip-level ESD rating exceeds HBM 2 kV, meeting AEC-Q100 expectations for underhood automotive electronics. Typical applications include automotive body controllers, instrument cluster MCUs, HVAC control modules, central body electronics, industrial PLC I/O expanders, and CAN node peripherals. The wide operating temperature range (-40C to +125C) makes it well-suited for engine-bay and chassis-mounted ECUs. When designing with this part, ensure the BDM interface is accessible via a 6-pin header for production firmware updates, and observe the recommended decoupling network of 100 nF + 10 uF near each VDD pin. Note that the part is marked Obsolete by some sources, so verify lifecycle status before committing to new designs. This page synthesizes distributor pricing, automotive-grade drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12E256MPVE - 16-bit HCS12 MCU, 256KB Flash, 112-LQFP
MC9S12E256MPVE

MC9S12E256MPVE - 16-bit HCS12 MCU, 256KB Flash, 112-LQFP

The NXP MC9S12E256MPVE is a 16-bit HCS12 microcontroller with 256 KB Flash, 16 KB RAM, and a maximum CPU speed of 25 MHz, housed in a 112-pin LQFP (20x20 mm) tray-grade package. It integrates three SCI, one SPI, one IIC, three 16-bit 4-channel timer modules, an 8-channel 10-bit ADC, a 6-channel PWM, and on-chip bandgap voltage regulator. What is an HCS12 microcontroller? An HCS12 is a 16-bit CISC microcontroller core originally developed by Motorola and now maintained by NXP Semiconductors as part of the S12 family. HCS12 devices belong to the broader category of embedded processors and controllers within integrated circuits, and they target cost-sensitive automotive and industrial applications. They are typically used in body electronics, instrument clusters, sensor interface modules, and CAN-node endpoints where deterministic 16-bit performance, on-chip Flash, and small-footprint LQFP packages are required. Key features of the MC9S12E256MPVE include 256 KB of on-chip Flash EEPROM, 16 KB of RAM, an HCS12 CPU core with full 16-bit data paths, and a phase-lock loop (PLL) that allows power consumption and performance to be tuned to application requirements. An internal bandgap-based voltage regulator (Vreg) generates the core supply, and the device supports single-wire background debug mode (BDM) for in-circuit development. The MC9S12E256MPVE uses the standard S12E architecture with 16-bit internal and external buses, 4 KB of EEPROM emulation, and a periodic interrupt timer. The PLL block can boost the bus clock above the oscillator frequency, and the on-chip regulator allows the part to operate from a single 5 V supply rail. Typical applications include automotive body controllers, HVAC control modules, instrument clusters, lighting control modules, and industrial sensor-interface modules. The device's CAN connectivity and 16-bit timers make it well-suited for distributed vehicle networks. When designing with this MCU, ensure the 5 V supply is well-decoupled with 100 nF and 10 uF capacitors placed close to the VDD/VSS pairs. Unused interrupts should be tied to defined levels per the datasheet, and the BDM debug port should be brought out to a header for production programming. This page synthesizes distributor stock, lifecycle status, and pin-compatible drop-in alternatives for the MC9S12E256MPVE, providing information not consolidated on a single manufacturer or distributor page.

Cotización Contacto
MC9S12E256VFUE - 16-Bit 25MHz HCS12 MCU, 256KB Flash, 80-QFP | NXP
MC9S12E256VFUE

MC9S12E256VFUE - 16-Bit 25MHz HCS12 MCU, 256KB Flash, 80-QFP | NXP

The NXP (formerly Freescale) MC9S12E256VFUE is a 16-bit HCS12 microcontroller with a 25 MHz CPU, 256 KB Flash EEPROM, and 16 KB RAM, housed in an 80-pin LQFP package (14x14 mm). It targets low-cost general-purpose embedded designs that need a balance of flash density, on-chip peripherals (SCI, SPI, IIC, TIM, PWM), and automotive-grade robustness. A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory, data memory, and peripherals. The HCS12 is a 16-bit CISC core used in NXP's S12 family. Within that hierarchy, the E-series sits below the XG/XS performance tiers and above the C-series cost-optimized parts. The MC9S12E256 belongs to the HCS12 microcontroller family -> 16-bit MCU -> embedded microcontroller -> semiconductor IC taxonomy. Key features include 256 KB of Flash (256K x 8), 16 KB RAM, three SCI modules, one SPI, one IIC, three 4-channel 16-bit timer modules (TIM), a 6-channel PWM, 60 I/O lines, and an external bus interface (EBI/EMI). The 25 MHz bus clock enables deterministic control loops. Integrated peripherals reduce BOM cost in body, chassis, and industrial-control modules. The architecture uses a 16-bit HCS12 CPU with enhanced indexed addressing and a built-in hardware multiply/divide for DSP-style operations. The 256 KB Flash supports in-application reprogramming via SCI or CAN-style bootloader, while the 16 KB RAM supports modest data buffering. The on-chip oscillator and PLL simplify BOM by removing external crystal requirements. Typical applications include automotive body controllers, instrument clusters, HVAC modules, industrial PLCs, sensor nodes, and consumer appliances. The 60 I/O count and PWM/ADC resources support multi-channel actuator and sensor fusion designs. Freescale/NXP's standard S12 toolchain (CodeWarrior, P&E Multilink) eases firmware development and debugging. When designing with this part, ensure the BKGD pin is accessible for in-circuit debug and that the EBI pins are correctly configured when external memory is used. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 5 mm of each supply pin. The V suffix indicates an 80-pin LQFP package. This page synthesizes distributor pricing, drop-in HCS12 family alternatives, and practical design notes not found in the manufacturer datasheet alone. Source data was retrieved from DigiKey, Mouser, NXP, and Octopart.

Cotización Contacto
MC9S12E32CFU - 16-Bit 50MHz 32KB Flash MCU | NXP
MC9S12E32CFU

MC9S12E32CFU - 16-Bit 50MHz 32KB Flash MCU | NXP

The NXP Semiconductors MC9S12E32CFU is a 16-bit S12 HCS12 microcontroller operating at up to 50 MHz, with 32 KB of flash memory, in an 80-QFP package measuring 14 x 14 mm. It belongs to the MC9S12E family and combines an embedded controller, flash program memory, communication peripherals, and timer resources for compact embedded control systems. An HCS12 microcontroller is a 16-bit embedded processor and controller within the broader microcontroller and semiconductor hierarchy. It executes firmware from embedded flash, monitors external inputs, operates timers and communication interfaces, and controls actuators or system signals. The MC9S12E32CFU is positioned for applications requiring a conventional embedded-control architecture, deterministic peripheral access, and a QFP package suitable for leaded-board assembly. Verified distributor information identifies the device as a 16-bit, 50 MHz S12 HCS12 microcontroller with 32 KB organized as 32K x 8 flash memory and an 80-QFP package measuring 14 x 14 mm. These verified values distinguish it from related devices with different memory capacities, clock rates, package formats, or automotive qualifications. The MC9S12E family user guide provides the technical foundation for clocking, memory, interrupts, ports, timers, serial communication, and electrical characteristics. Firmware development requires an S12-compatible toolchain and device support files. Exact RAM capacity, supply range, peripheral mix, pin names, operating temperature, and package tolerances were not established by the supplied source snippets and therefore require confirmation from the manufacturer documentation before schematic release. Typical design roles include industrial equipment, automotive and transportation modules, motor-control auxiliaries, sensing nodes, and compact embedded controllers where 50 MHz performance and 32 KB flash are sufficient. A migration to another MCU must verify pin assignments, memory-map compatibility, peripheral behavior, interrupt vectors, clock requirements, and software dependencies rather than relying only on matching the processor frequency. The primary design consideration is footprint verification. The verified package is an 80-QFP, but the precise pin assignments and exposed-pad treatment were not available in the supplied data. Confirm the complete manufacturer pinout, recommended decoupling, oscillator circuitry, programming interface, and unused-pin handling before layout or PCB release. This page consolidates verified distributor specifications, source links, package constraints, sourcing guidance, and engineering cautions. It intentionally separates confirmed values from missing technical details so engineers can identify what must be checked in the manufacturer datasheet before production use.

Cotización Contacto
MC9S12E32CFUE - 16-bit HCS12 MCU, 32KB Flash, QFP-80 | NXP
MC9S12E32CFUE

MC9S12E32CFUE - 16-bit HCS12 MCU, 32KB Flash, QFP-80 | NXP

The NXP MC9S12E32CFUE is a 16-bit HCS12 CISC microcontroller with 32KB of on-chip Flash, packaged in an 80-pin QFP (14x14 mm) and qualified for automotive designs. The HCS12 core delivers up to 25MHz CPU operation and integrates 2KB of RAM, 1KB of EEPROM, multiple timers, an 8-channel 10-bit ADC, and CAN/SPI/SCI peripherals that automotive body and chassis modules rely on. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a set of on-chip peripherals such as ADCs, timers, and communication interfaces. Within the broader taxonomy, the MC9S12E32CFUE belongs to: MCU -> 16-bit microcontroller -> HCS12 family -> automotive-grade microcontroller -> semiconductor IC. It is designed for deterministic, real-time control in harsh electrical environments. Key features include full 16-bit data paths throughout the core and peripherals, a phase-lock loop (PLL) that lets the user trade power consumption for performance, an on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply from a 2.97V to 5.5V external rail, and background debug mode (BDM) for non-intrusive in-circuit debug. The 32KB Flash supports in-application reprogramming, which is essential for field firmware updates on automotive ECUs. The architecture is built on the well-established HCS12 CPU with enhanced indexed addressing and a hardware multiply/divide accelerator. The integrated CAN 2.0A/B controller and J1850/SCI/SPI interfaces are tuned for body and chassis networking, and the on-chip 10-bit ADC provides 8 microseconds of conversion time suitable for sensor sampling at typical automotive rates. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, door/seat/window nodes, and general-purpose 16-bit embedded designs that need a robust CAN-capable MCU with Flash-based firmware storage. The wide 2.97V-5.5V operating range covers the 5V nominal automotive rail. When designing with this MCU, ensure the PLL filter network is laid out per the reference manual and that the Vreg decoupling is sufficient. The 80-QFP exposed-pad variant (if used) requires thermal via stitching to the inner ground layer to keep junction temperature within range at extended temperature operation up to +125C.

Cotización Contacto
MC9S12E32VFUE16R - S12E 16-bit MCU, 32KB Flash, 80-QFP | NXP
MC9S12E32VFUE16R

MC9S12E32VFUE16R - S12E 16-bit MCU, 32KB Flash, 80-QFP | NXP

The NXP MC9S12E32VFUE16R is a 16-bit HCS12 microcontroller from the S12E family, offering 32KB of on-chip Flash program memory, 4KB of RAM, and a 25 MHz CPU core (with internal bus speeds up to 50 MHz), housed in an 80-pin LQFP (QFP 80, 14x14 mm) surface-mount package with 60 general-purpose I/O lines. It integrates the HCS12 CPU, FLASH EEPROM, RAM, multiple timers (ECT, PWM), an 8-channel 10-bit ADC, an SCI, an SPI, and inter-module buses (EBI/EMI and I2C), giving embedded designers a single-chip solution for automotive body and general-purpose control. A microcontroller (MCU) is a programmable processor that combines a CPU, RAM, non-volatile program memory (Flash), and a rich set of on-chip peripherals (timers, communication controllers, ADCs) on one die. The HCS12E belongs to the broader 16-bit MCU family — part of the embedded microcontroller hierarchy: microcontroller -> 16-bit MCU -> HCS12 family -> NXP automotive MCU. The S12E family targets cost-sensitive automotive and industrial control designs where deterministic interrupt response and CAN/SPI/Ethernet-style peripheral mix are required. Key features of the MC9S12E32VFUE16R include 25 MHz CPU clock (50 MHz internal bus via PLL), 32KB Flash / 4KB RAM, 60 I/O, an Enhanced Capture Timer (ECT) with 8-channel 8-bit PWM or 4-channel 16-bit PWM, an 8-channel 10-bit ADC, a Watchdog Timer (WDT) and Power-On Reset (POR), and a wide operating voltage range suitable for 5 V automotive rails. The 80-LQFP package supports robust 14x14 mm PCB assembly while exposing most of the device's peripheral pins. The MC9S12E32VFUE16R achieves its cost effectiveness through peripheral integration: combining a 10-bit ADC, PWM generator, ECT, and serial interfaces on one chip reduces external component count. The HCS12 core's BDM (Background Debug Mode) and on-chip trace simplify firmware bring-up, while Flash EEPROM allows in-application reprogramming for field updates, lowering total BOM and lifecycle cost. Typical applications include automotive body controllers (BCM), HVAC and lighting controllers, instrument clusters, industrial sensor conditioning nodes, low-end CAN nodes, and consumer appliances. Designers choose this MCU where they need a deterministic 16-bit core with more compute headroom than 8-bit MCUs but without paying for 32-bit complexity. When designing with this part, allocate sufficient time for the HCS12 toolchain setup (CodeWarrior or GNU/S12X GCC) and ensure BDM access for programming/debug, which requires 2 or 3 dedicated pins and a small header on the board. This page synthesizes distributor pricing, drop-in 80-LQFP alternatives from the same S12E family, parameter comparisons, and design notes that go beyond the standalone NXP datasheet PDF.

Cotización Contacto
MC9S12E64CFUER - 16-Bit HCS12 MCU, 64KB Flash, 80-QFP | NXP
MC9S12E64CFUER

MC9S12E64CFUER - 16-Bit HCS12 MCU, 64KB Flash, 80-QFP | NXP

The NXP Semiconductors MC9S12E64CFUER is a 16-bit HCS12 family microcontroller delivering 25 MHz CPU performance with 64 KB of on-chip Flash memory and 4 KB of RAM, housed in an 80-pin QFP (14x14 mm) package on tape-and-reel. It integrates a rich peripheral set including EBI/EMI, I²C, SCI, SPI, PWM, a watchdog timer and power-on reset, with 60 general-purpose I/O lines for mixed digital and analog interfacing. A microcontroller (MCU) is a single-chip computer that combines a processor core, program memory (Flash/ROM), working memory (RAM), and on-chip peripherals into one device. The HCS12 architecture is a 16-bit CISC core from Freescale/NXP that evolved from the HC11, offering enhanced addressing modes, richer instruction set, and background debug mode (BDM). Within the broader taxonomy: HCS12 -> 16-bit MCU -> embedded microcontroller -> integrated circuit -> semiconductor. Key features of the MC9S12E64CFUER include 64 KB Flash for program storage, 4 KB RAM for working data, 60 I/O pins that support interrupt-driven sensing and actuation, and a 25 MHz bus clock for real-time control loops. The integrated PWM module suits motor and lighting control, while multiple serial interfaces (SCI, SPI, I²C) enable bridging to sensors, displays and radio modules. The part supports 2.5 V / 3.3 V / 5 V operation, simplifying migration between logic families. The HCS12 core uses a 16-bit data path with accumulator-based CISC instructions and an enhanced indexed addressing mode with page registers, enabling efficient C code generation while preserving bit-manipulation strength. The 80-QFP package exposes a wide external bus (EBI/EMI) for memory expansion, plus a Background Debug Mode (BDM) interface for in-circuit programming and real-time debug without an emulator. Typical applications include automotive body and chassis ECUs, industrial control boards, sensor hubs, motor-control subsystems and consumer appliances. The 64 KB Flash tier suits applications that need a real-time OS or USB device stack, while the 5 V tolerance makes the part attractive for interfacing with legacy 5 V sensors and actuators. When designing with this part, ensure that the BDM pins are brought out to a header for production programming and field firmware updates. Plan oscillator layout carefully: place the crystal and load capacitors within 5 mm of the EXTAL/XTAL pins to avoid start-up failures and EMI susceptibility. The 80-QFP package requires a 14x14 mm land pattern with thermal vias under the die-attach pad to dissipate the few-hundred-milliwatt typical load. This page synthesizes distributor pricing, drop-in cross-reference data, and practical design notes drawn from NXP S12 application notes that are not consolidated in any single datasheet.

Cotización Contacto
MC9S12E64CPV - 16-bit HCS12 MCU 64KB Flash 112-LQFP | NXP
MC9S12E64CPV

MC9S12E64CPV - 16-bit HCS12 MCU 64KB Flash 112-LQFP | NXP

The NXP (formerly Motorola/Freescale) MC9S12E64CPV is a 16-bit HCS12 microcontroller IC integrating 64 KB of on-chip Flash memory and 4 KB of RAM, housed in a 112-pin LQFP (20x20 mm) package. The device is part of the HCS12 family and supports up to 92 I/O lines for peripheral expansion in industrial and automotive body-electronics designs. The part is built around the HCS12 CPU core, which is opcode-compatible with the 68HC11 architecture, easing legacy firmware migration. Internal oscillator support simplifies BOM cost by eliminating external crystals in cost-sensitive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable peripherals into one package. The HCS12 MCU belongs to the broader 16-bit embedded controller taxonomy, sitting between 8-bit microcontrollers (e.g. HC08, AVR) and 32-bit microcontrollers (e.g. ARM Cortex-M). MCUs are the foundation of embedded systems, used wherever deterministic real-time control, low power, and on-chip integration are required. The HCS12 family specifically targets automotive body controllers, industrial control, and consumer appliances where 16-bit arithmetic throughput and CAN connectivity are required. Key features of the MC9S12E64CPV include 64 KB (64K x 8) of Flash program memory, 4 KB of on-chip RAM, an internal oscillator eliminating external clock hardware, and 92 programmable I/O pins for flexible peripheral mapping. The device supports 25 MHz bus operation at 5 V (40 ns minimum instruction cycle) and 16 MHz bus operation at 3.3 V (62.5 ns minimum instruction cycle), enabling dual-voltage operation. The wide operating voltage range supports both 5 V legacy industrial designs and 3.3 V low-power systems. Technically, the HCS12 core employs a 16-bit arithmetic logic unit with enhanced indexed addressing modes and a hardware multiply/accumulate engine. The architecture integrates background debug mode (BDM) for in-circuit programming and debugging without an emulator. The 112-LQFP package provides ample I/O count for body controllers, HVAC modules, and industrial sensor hubs. Typical applications include automotive body control modules, HVAC controllers, industrial sensor interface boards, and CAN-node endpoints. The 92 I/O count and on-chip CAN-friendly timers make this part well-suited for distributed automotive networks. Design consideration: ensure proper decoupling (0.1 uF plus bulk capacitance) on each VDD/VSS pair, and follow the trace-length guidelines for the external bus interface when expanding memory. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12E64CPVE - 16-Bit 25MHz 64KB MCU | NXP | Automotive
MC9S12E64CPVE

MC9S12E64CPVE - 16-Bit 25MHz 64KB MCU | NXP | Automotive

The NXP Semiconductors MC9S12E64CPVE is a 16-bit HCS12 microcontroller with a 25 MHz core, 64 KB of Flash memory, and a 112-pin LQFP package measuring 20 mm by 20 mm. It is designed as a cost-effective, general-purpose MCU family member for demanding embedded control applications, including automotive-oriented designs. An HCS12 microcontroller is a 16-bit embedded controller combining a processor core, Flash program memory, data memory, timers, serial interfaces, and digital input/output resources on one integrated circuit. Its full 16-bit data path supports control-oriented software while retaining familiar general-purpose MCU integration. The MC9S12E family includes a phase-locked loop, allowing clock frequency and power-consumption requirements to be adjusted for different operating conditions. The MC9S12E64CPVE provides 64 KB of Flash storage for firmware, 16-bit processing, and a documented maximum core frequency of 25 MHz according to the distributor records supplied for this part. It also uses an on-chip bandgap-based voltage regulator to generate the regulated internal supply required by the MCU. This integration supports a compact embedded implementation while providing a familiar set of peripherals for automotive and industrial control. The 112-LQFP package provides ample connection density for external sensing, actuation, communication, and debug circuitry. Its 20 mm by 20 mm gull-wing format is appropriate for multilayer PCB designs that need a larger pin count than smaller QFP packages. Because the exact peripheral map and electrical limits are not fully present in the supplied web snippets, use the MC9S12E family user guide and the manufacturer product page for authoritative pin, timing, memory-map, and electrical details. Typical applications include body and vehicle control modules, motor and actuator controllers, sensor-interface equipment, industrial automation controllers, and embedded automotive subsystems. The device is marked NRND by the NXP product-page search result, so procurement should account for lifecycle planning and verify availability before committing to a new design. Designers should confirm clock, power, reset, debug, peripheral, and pin multiplexing requirements against the MC9S12E documentation. The 112-LQFP footprint requires careful fanout and decoupling, while firmware should use the documented clock and peripheral initialization sequence. This page combines verified distributor descriptions, lifecycle information, package details, and procurement-oriented engineering guidance.

Cotización Contacto
MC9S12E64MFUE - 64KB Flash 16-Bit HCS12 MCU, 25MHz | NXP
MC9S12E64MFUE

MC9S12E64MFUE - 64KB Flash 16-Bit HCS12 MCU, 25MHz | NXP

The NXP MC9S12E64MFUE is a 16-bit HCS12 microcontroller with 64KB Flash memory, 50MHz maximum core frequency, and 4KB RAM, housed in an 80-pin QFP (14x14 mm) package. It is part of the S12E family of general-purpose MCUs featuring full 16-bit data paths, a phase-lock loop (PLL) for adjustable performance, and an on-chip bandgap voltage regulator. What is an HCS12 microcontroller? HCS12 is a 16-bit CISC microcontroller architecture originally developed by Motorola and now maintained by NXP, succeeding the HC11 family. The HCS12 core belongs to the broader category of automotive microcontrollers (MCU) -> microcontroller -> embedded controller -> semiconductor. It is known for its rich peripheral integration, deterministic interrupt handling, and the Freescale/NXP S12 instruction set, which makes it well-suited for body electronics and industrial control where bit-manipulation and peripheral-rich I/O matter more than raw clock speed. Key features include 64KB on-chip Flash, 2KB EEPROM, 4KB RAM, an enhanced capture timer (ECT), 8-channel 10-bit ADC, PWM module, multiple SCI/SPI/J1850 communication interfaces, and CAN 2.0 interface. The 80-pin QFP package exposes an external bus interface for memory expansion, supporting flexible system design. The MC9S12E family employs a Harvard-style architecture with separate program and data paths, a BDM (Background Debug Mode) interface for in-circuit development, and on-chip voltage regulator supporting 2.5V/3.3V/5V operation. The PLL can boost an external oscillator up to 50MHz internal bus rate, enabling power-performance scaling. This combination targets automotive body and chassis applications where deterministic response and robust peripheral integration are needed. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, industrial PLC input/output modules, and CAN-connected sensor nodes. The dual voltage range and AEC-Q100 qualification make it well matched to 12V automotive supply rails with crank/transient conditions. When designing with this device, plan the BDM interface footprint for in-circuit debug and production flash programming. Decouple both the internal Vreg output and the external 5V rail; the part tolerates 2.5V to 5V supply, but bypassing depends on the chosen mode. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same S12E family, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the MC9S12E64MFUE confidently for automotive and industrial designs.

Cotización Contacto
MC9S12E64MPVE - 16-Bit HCS12 MCU 64KB Flash | NXP
MC9S12E64MPVE

MC9S12E64MPVE - 16-Bit HCS12 MCU 64KB Flash | NXP

The NXP MC9S12E64MPVE is a 16-bit HCS12 CISC microcontroller featuring 64KB of on-chip Flash, 4KB of RAM, and 92 I/O pins, housed in a 112-pin LQFP package (20x20 mm). It operates from a 2.5V/3.3V/5V supply and is qualified to the automotive temperature grade per its Freescale heritage, making it suited for chassis, body, and powertrain electronics. The HCS12 core runs at 25 MHz bus speed with an enhanced burst-mode flash controller. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, PWM, CAN, SCI/SPI, and general-purpose I/O. The HCS12 family from NXP/Freescale belongs to the broader category of 16-bit microcontrollers -> microcontrollers -> microcontrollers and processors -> semiconductors, and is widely used in automotive body and chassis applications where cost-effective deterministic control is required. Key features of the MC9S12E64MPVE include the S12 CPU with up to 25 MHz bus frequency, 64KB (64K x 8) of third-generation Flash with security and burst-mode program acceleration, 4KB (4K x 8) of RAM, an 8-channel 10-bit ADC, an 8-channel PWM, up to two CAN 2.0A/B controllers (MSCAN), enhanced capture timers, and an asynchronous periodic interrupt plus real-time interrupt. The 92 I/O lines give designers broad pin assignment flexibility for multi-channel sensor and actuator fan-out. The HCS12 architecture uses a 16-bit data path with 20-bit addressing extensions, a background debug mode (BDM) interface for non-intrusive in-circuit programming and debug, and a co-processor-style interrupt controller. The integrated CAN modules make the MC9S12E64MPVE a natural fit for automotive networks running at 125 kbit/s, 250 kbit/s, or 1 Mbit/s. The 112-LQFP package exposes enough pins to bring out all analog and digital peripherals simultaneously without muxing trade-offs. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC controllers, door/seat modules, electric window regulators, lighting controllers, and CAN-connected sensor nodes. The wide voltage tolerance (2.5V/3.3V/5V) makes it suitable for both 5V analog sensor front-ends and 3.3V digital logic rails. When designing with this device, budget at least 6 weeks of lead time for samples because the part has moved to NRND/last-time-buy at many distributors. Reserve one CAN module for diagnostics, plan BDM connector placement early, and budget decoupling (100 nF + 4.7 uF) close to each VDD/VSS pair. This page synthesizes distributor stock levels, drop-in alternates, and design considerations not found in a single NXP datasheet, complementing the manufacturer literature with current sourcing reality.

Cotización Contacto
MC9S12E64VFUE16R - 16-bit HCS12 MCU, 64KB Flash, 80-QFP | NXP
MC9S12E64VFUE16R

MC9S12E64VFUE16R - 16-bit HCS12 MCU, 64KB Flash, 80-QFP | NXP

The NXP MC9S12E64VFUE16R is a 16-bit HCS12 CISC microcontroller with 64 KB of on-chip Flash, 50 MHz maximum bus frequency, and an 80-pin QFP (QFP-80, 14x14 mm) package. As a member of NXP's MC9S12E family, it integrates a 16-bit CPU, 64 KB Flash, 2 KB RAM, 1 KB EEPROM, and automotive-grade peripherals including CAN, SCI, SPI, and an 8-channel 10-bit ADC. The trailing "E16" suffix in the part number denotes 64 KB Flash; "VFUE16" specifies the 80-QFP package and tape-and-reel packaging; the final "R" indicates reel orientation. The device operates from a 2.5 V/3.3 V/5 V supply and is AEC-Q100 qualified for automotive use. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals such as timers, communication interfaces, and analog-to-digital converters. The HCS12 family from NXP is built on the Freescale (now NXP) legacy 16-bit CISC architecture optimized for automotive and industrial real-time control, where deterministic interrupt response, on-chip EEPROM, and CAN connectivity simplify physical layer integration into vehicle networks. Key features include a Phase-Locked Loop (PLL) clock synthesizer that allows power consumption and performance to be tuned to operational requirements, an on-chip bandgap-based voltage regulator (Vreg) that derives the internal logic supply from the external 5 V rail, and Background Debug Mode (BDM) for non-intrusive in-circuit debugging. The 80-QFP package provides ample general-purpose I/O for body controllers, instrument clusters, and sensor interface modules. Technically, the MC9S12E core executes the HCS12 instruction set with full 16-bit data paths, supporting up to 50 MHz bus speed derived from an external crystal or oscillator through the PLL. The on-chip Flash supports in-application programming and security features such as a flash lock bit. The integrated CAN 2.0A/B module, multiple SCI/UART channels, and SPI/SSI peripherals position the device for distributed automotive networks. Typical applications include automotive body control modules, instrument cluster controllers, HVAC lighting, sensor interface nodes, CAN node endpoints, and industrial automation controllers. The wide operating voltage and AEC-Q100 qualification also make it suitable for non-automotive industrial embedded designs that require a 16-bit core. Designers should pay attention to the decoupling network, PLL loop-filter component values, and BDM connector pinout when migrating designs across MC9S12E family variants. The 'E128' and 'E64' differ only in Flash density; the 'CFUE' (112-pin) and 'VFUE16' (80-pin) variants differ in package and pinout. This page synthesizes NXP datasheet excerpts, distributor pricing from Mouser/DigiKey/Octopart, and engineering guidance to help engineers select, source, and design with the MC9S12E64VFUE16R efficiently.

Cotización Contacto