Microcontroladores

Productos (20.000+)

MC9S12XA512CFV - 16-Bit HCS12X MCU 512KB Flash 40MHz | NXP
MC9S12XA512CFV

MC9S12XA512CFV - 16-Bit HCS12X MCU 512KB Flash 40MHz | NXP

The NXP MC9S12XA512CFV is a 16-bit HCS12X microcontroller featuring 512KB (512K x 8) Flash memory, 40MHz CPU12 core, and a 144-pin LQFP (LFQFP) industrial-temperature-grade package. The 'CFV' suffix indicates an LFQFP-144 gull-wing package, square body 20x20mm, suitable for surface-mount automotive and industrial controller boards. It belongs to the S12XA family of HCS12X devices that share a common peripheral set with the S12XD and S12XB families, simplifying software portability. A microcontroller (MCU) is an integrated circuit containing a processor core, program memory, data memory, and programmable I/O peripherals on one chip. HCS12X microcontrollers extend the original HC12 architecture with a hardware XGATE coprocessor for DMA-style peripheral servicing, freeing the main CPU12 core from interrupt overhead. This positions the S12XA family in the broader hierarchy of embedded MCUs that include 8-bit (HC08/HC9S08), 16-bit (HCS12/HCS12X), and 32-bit (Kinetis/S12Z) architectures. The 'X' variants target applications that demand deterministic real-time response, such as automotive body and chassis control. Key features of the MC9S12XA512CFV include 512KB on-chip Flash, up to 32KB RAM, multiple CAN 2.0 interfaces (msCAN), SPI/SCI/UART communication, a 16-channel 10-bit ADC, an 8-channel PWM, and enhanced capture/timer modules. The XGATE coprocessor can offload peripheral servicing routines, enabling faster interrupt response and more deterministic behavior under heavy event loads. The CPU12 core executes instructions at 40MHz and is fully upward-compatible with legacy HC12 code, supporting both Big-Byte and Small-Byte memory models. The device operates from a 3.15V to 5.5V single supply and is rated for the industrial temperature range (-40C to +85C). Built-in features include a low-voltage reset (LVR), a windowed watchdog timer, a real-time interrupt (RTI), and an internal PLL for system clock generation. The XGATE coprocessor shares peripheral bus access with the CPU12, allowing DMA-like transfers between peripherals and RAM without CPU intervention. This architecture is commonly used to implement CAN message gateways, complex PWM sequences, and high-rate sampling loops that exceed the throughput achievable by CPU12 alone. Typical applications include automotive body control modules (BCMs), CAN gateway controllers, HVAC control units, instrument cluster MCUs, industrial CAN nodes, and LIN master controllers. Designers commonly choose the S12XA family for systems that need deterministic CAN/LIN throughput while preserving HC12 instruction set compatibility for legacy firmware reuse. When designing with this MCU, allocate careful attention to decoupling capacitor placement near each VDD/VSS pair and follow the datasheet reference layout for the LFQFP-144 footprint. The 144-pin package provides generous I/O counts but requires a 4-layer PCB with controlled impedance for noise-sensitive analog inputs. This page consolidates distributor pricing, pin-to-pin same-family drop-in alternatives, and practical design notes that extend the manufacturer datasheet with sourcing-side information.

Cotización Contacto
MC9S12XA512VAL - 16-bit 512KB Flash HCS12X MCU | NXP | 112-LQFP
MC9S12XA512VAL

MC9S12XA512VAL - 16-bit 512KB Flash HCS12X MCU | NXP | 112-LQFP

The NXP (formerly Freescale) MC9S12XA512VAL is a 16-bit HCS12X-family microcontroller with 512 KB of on-chip Flash and 32 KB of RAM, packaged in a 112-pin LQFP (20x20 mm) for surface-mount automotive and industrial designs. The part runs the HCS12X CPU core at up to 80 MHz, integrates an Enhanced XGATE co-processor for peripheral offload, and exposes 91 general-purpose I/O lines with a rich peripheral set. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O onto one silicon die. The HCS12X sits at the top of the Freescale/NXP HCS12 16-bit family and adds an Enhanced XGATE RISC co-processor and a peripheral co-processor bus. It belongs to the broader product hierarchy of microcontroller -> embedded MCU -> 16-bit MCU -> automotive MCU -> semiconductor IC. Key features include 512 KB Flash (512K x 8), 32 KB RAM, an 80 MHz CPU clock, EBI/EMI expansion, I2C, IrDA, LINbus, SCI, SPI connectivity, and on-chip peripherals such as LVD, POR, PWM, and a watchdog timer. The 112-LQFP package exposes 91 I/O pins and operates from a 2.5 V supply, which is typical for HCS12X-family members. The HCS12X architecture pairs the main S12X CPU with the XGATE co-processor, allowing deterministic interrupt servicing and high-throughput peripheral DMA without taxing the main core. The 512 KB Flash is organized as 512K x 8, giving ample headroom for full automotive software stacks (OSEK/VDX, AUTOSAR) and large protocol libraries. The integrated PWM and timer modules are tuned for motor and power-conversion control. Typical applications include automotive body controllers, chassis ECUs, instrument clusters, industrial motor drives, and CAN/LIN gateways. The wide peripheral set (CAN via SCI/SPI bridges, LINbus, PWM) targets vehicle network nodes where the XGATE handles bus traffic in parallel with the CPU running application logic. When designing with the MC9S12XA512VAL, pay attention to the 2.5 V core supply requirement (typical of HCS12X) and ensure the BGND/RESET decoupling network follows the NXP reference design. Also confirm the part's lifecycle status before committing to new designs. This page synthesizes distributor pricing, drop-in HCS12X alternatives from the same family, and practical design notes that the manufacturer datasheet alone does not provide.

Cotización Contacto
MC9S12XD128MAL - 16-Bit 80MHz 128KB Flash S12X MCU | NXP | 112-LQFP
MC9S12XD128MAL

MC9S12XD128MAL - 16-Bit 80MHz 128KB Flash S12X MCU | NXP | 112-LQFP

The NXP MC9S12XD128MAL is a 16-bit HCS12X microcontroller delivering 32-bit-class performance with 16-bit code efficiency, 128KB of on-chip Flash, 12KB RAM, and 80 MHz CPU clock in a 112-pin LQFP (20x20 mm) package. Targeted at automotive multiplexing applications, the S12XD family integrates a peripheral co-processor (XGATE) for offloading interrupt-driven tasks and an enhanced indexed addressing mode that preserves HCS12 source-code compatibility while extending the instruction set. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program and data memory, and a configurable set of peripherals such as timers, ADC, communication controllers, and GPIO. Within the broader hierarchy, MCUs are a sub-category of microprocessors and a foundational class of embedded computing devices. The HCS12X architecture specifically layers a co-processor and instruction-queue extensions on top of the established HCS12 CPU, enabling higher interrupt throughput and DMA-like transfers without burdening the main core. Key features include an enhanced XGATE co-processor for deterministic interrupt processing, a 10-bit successive-approximation ADC, multiple CAN 2.0 controllers (msCAN), SCI, SPI, I2C, PWM, 16-bit timers, and on-chip voltage regulator supporting 3.3V/5V operation. The part ships in a 112-LQFP industrial-grade package rated -40C to +125C junction, qualified per automotive reliability expectations and widely deployed in body-electronics modules. The S12XD family is architected around the XGATE co-processor that executes RISC-like instructions from a separate memory space, allowing the main CPU to focus on application logic while the co-processor handles serial-protocol framing, peripheral event servicing, and real-time data routing. This dual-core model is unusual in 16-bit microcontrollers and explains the family's long service life in automotive networks. Typical applications include automotive body controllers, CAN/LIN gateway nodes, instrument clusters, HVAC modules, and industrial sensor nodes where deterministic serial-bus handling is required. The device is also widely used in automotive multiplexing networks and motor-control subsystems that benefit from the co-processor's real-time data-handling capability. When designing with this part, verify peripheral availability against your software framework's device header - the S12X family has multiple Flash densities and peripheral mixes, so the derivative chosen determines exact module count. Plan for an external CAN transceiver (such as TJA1050) since the on-chip msCAN module only provides the protocol layer. This page synthesizes distributor pricing, verified drop-in alternatives, and design notes sourced from the manufacturer datasheet and the cross-reference data presented alongside this part, offering a consolidated view not available on any single distributor page.

Cotización Contacto
MC9S12XD256CAL - 16-bit 80MHz 256KB Flash MCU | NXP | Automotive
MC9S12XD256CAL

MC9S12XD256CAL - 16-bit 80MHz 256KB Flash MCU | NXP | Automotive

The NXP (Freescale) MC9S12XD256CAL is a 16-bit HCS12X automotive microcontroller running at 80 MHz bus frequency with 256 KB of on-chip flash memory and 12 KB of RAM, housed in a 112-pin LQFP (20x20 mm) surface-mount package. It is AEC-Q100 qualified for automotive applications. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest programmable layer of the embedded systems hierarchy: MCU -> embedded processor -> microprocessor -> semiconductor device. The HCS12X family is NXP's enhanced 16-bit CISC architecture, upward compatible with the earlier HCS12 (S12) instruction set, so existing HCS12 firmware migrates with minimal changes. Key features of the MC9S12XD256CAL include the HCS12X CPU with instruction queue and enhanced indexed addressing, 256 KB (256K x 8) flash program memory, a phase-locked loop (PLL)-based clock and reset generator (CRG) that multiplies an external crystal up to the 80 MHz bus rate, multiple serial communication interfaces (SCI, SPI), a controller area network (CAN) module for vehicle networks, and an analog-to-digital converter. The device operates from a 5 V supply with a 2.5 V regulated core, a combination typical of the S12XD family. The XGATE co-processor architecture of the S12XD generation offloads interrupt handling and communication tasks from the main CPU, effectively providing an additional 100 MIPS of concurrent processing throughput for protocol stacks and I/O management. Typical applications include automotive body control modules, HVAC controllers, dashboard and instrument clusters, gateways between CAN networks, and industrial control systems that benefit from the robust 5 V noise immunity and CAN connectivity. Design consideration: because the part is listed NRND (Not Recommended for New Designs) on the NXP product page, new designs should evaluate the S12XE or MagniV families, while existing designs can continue sourcing through authorized excess-stock channels. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12XD256MAA - 16-bit HCS12X MCU 256KB Flash 80MHz | NXP
MC9S12XD256MAA

MC9S12XD256MAA - 16-bit HCS12X MCU 256KB Flash 80MHz | NXP

The NXP MC9S12XD256MAA is a 16-bit microcontroller from the S12XD family, built on the enhanced HCS12X CPU core with XGATE co-processor, delivering up to 80 MHz core speed in an 80-pin PQFP (QFP 14x14 mm) package. It integrates 256 KB of on-chip Flash program memory, 14 KB of RAM, and 4 KB of EEPROM, providing automotive-grade CISC performance with instruction-set and programmer-model compatibility to the legacy HCS12 line. The XGATE peripheral co-processor offloads interrupt-driven tasks and provides an additional 80 MHz execution thread, doubling effective throughput for I/O-intensive firmware stacks. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and interrupt logic onto one silicon die. Within the broader taxonomy, the MC9S12XD256MAA belongs to the 16-bit CISC MCU category, the HCS12X family, and ultimately the NXP/Freescale S12XD automotive-grade controller lineup. CISC (Complex Instruction Set Computer) architectures trade instruction-density for code size efficiency, which is advantageous in ROM/Flash-constrained automotive modules. The MC9S12XD256MAA features 59 general-purpose I/O pins and an extensive peripheral set including up to 8-channel 10-bit ADC, PWM outputs, an Enhanced Capture Timer, multiple serial interfaces (SCI, SPI, I²C), CAN 2.0 A/B controllers, and an on-chip voltage regulator that supports both 2.5 V and 5 V operation. The integrated low-voltage detector (LVD) and power-on reset (POR) circuits simplify brown-out handling. Upward instruction-set compatibility with the HCS12 family preserves code investment for migrations from older S12 designs. Operating from a single 2.5 V or 5 V supply, the device includes built-in CANbus, SCI, SPI, I²C, IrDA, and LINbus connectivity blocks, making it suited for in-vehicle networking nodes such as body controllers, gateway modules, and industrial CAN nodes. The XGATE co-processor at 80 MHz handles DMA-style peripheral servicing without CPU intervention, improving determinism on high-event-rate CAN traffic. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, industrial CAN-based sensor nodes, and embedded CAN gateways. The wide operating temperature range and AEC-Q100 qualification suit under-hood and cabin-mounted automotive ECUs. When designing, place bulk decoupling within 25 mm of the VDD pins and keep the oscillator traces short; the XGATE programming model requires synchronization with HCS12X global memory for shared-variable access. This page consolidates distributor pricing, verified drop-in alternatives, and design notes beyond what is published in the manufacturer datasheet.

Cotización Contacto
MC9S12XD256MAG - 16-Bit HCS12X 80MHz 256KB Flash MCU | NXP
MC9S12XD256MAG

MC9S12XD256MAG - 16-Bit HCS12X 80MHz 256KB Flash MCU | NXP

The NXP MC9S12XD256MAG is a 16-bit HCS12X family microcontroller featuring an 80 MHz CPU core, 256 KB of on-chip Flash, and a 144-pin LQFP package. According to the NXP product brief, the device integrates the HCS12X CPU with enhanced indexed addressing, an instruction queue, and a richer instruction set, all while remaining upward-compatible with the legacy HCS12 instruction set. Background: HCS12X is NXP's (formerly Freescale) 16-bit microcontroller architecture, evolved from the HCS12 CISC core. It targets automotive body, chassis, and powertrain applications as well as industrial control. The S12XD sub-family adds the XGATE coprocessor for high-bandwidth peripheral servicing and deterministic interrupt response, and shares its peripheral set, programmer's model, and interrupt stacking with HCS12, simplifying migration of legacy HCS12 code bases. Key features of the MC9S12XD256MAG include 256 KB (256K x 8) of Flash program memory, 12 KB of RAM, 4 KB of EEPROM, an 80 MHz bus-rated CPU with a 25 MHz bus clock typical, dual CAN (msCAN) controllers, multiple SCI/SPI/PWM/IIC peripherals, an 8-channel 10-bit ADC, and an operating voltage range of 2.5 V/5 V that suits automotive 5 V rails. Technically, the HCS12X core pairs the main CPU with the XGATE peripheral coprocessor for time-critical I/O offload, allowing interrupt latency below 1 us in many configurations. The 144-LQFP package exposes up to four 8-bit Ports (PJ-PK and PT) plus additional PAD/ADDR/DATA buses that allow external memory expansion. Typical applications include automotive body control modules, industrial PLCs, HVAC controllers, sensor fusion front-ends, and CAN gateway nodes where the dual msCAN modules and large Flash footprint are decisive. Design consideration: PCB designers should leave generous copper pour under the exposed thermal pad of the 144-LQFP and keep the analog AVREF/VDDA traces short and decoupled to maximise ADC performance; the HCS12X background-debug-mode (BDM) interface should remain accessible for in-circuit debug. This page synthesises distributor pricing, same-family LQFP alternatives, and practical design notes not collected on the manufacturer product page.

Cotización Contacto
MC9S12XD256MAL - 16-bit 256KB Flash HCS12X MCU 112-LQFP | NXP
MC9S12XD256MAL

MC9S12XD256MAL - 16-bit 256KB Flash HCS12X MCU 112-LQFP | NXP

The NXP MC9S12XD256MAL is a 16-bit HCS12X microcontroller with 256KB Flash, 80MHz CPU, 112-LQFP (20x20mm) package. It features an XGATE co-processor (200MHz equivalent), 12KB RAM, 4KB EEPROM, and 119 I/O ports. An HCS12X MCU is a 16-bit CISC microcontroller that extends the classic HCS12 architecture with an XGATE auxiliary co-processor for high-bandwidth peripheral handling. It belongs to the automotive/industrial MCU family within the broader microcontroller hierarchy: MCU -> embedded processor -> semiconductor. HCS12X parts are upward-compatible with the HCS12 instruction set while adding enhanced indexed addressing, an instruction queue, and interrupt stacking that matches the HCS12 programmer's model. According to the NXP product page, the device targets automotive body and chassis applications as well as industrial control systems requiring deterministic real-time response. Key features include 80MHz CPU clock, 256KB on-chip Flash, 4KB EEPROM for data retention, 12KB SRAM, five CAN modules (msCAN), an 8-channel 16-bit timer, 8-channel PWM, two SPI, two I2C, and three SCI/UART interfaces. The integrated 16-channel 12-bit ADC with 2.5 µs conversion supports analog sensor reading common in automotive ECUs. The MC9S12XD256MAL uses Freescale/NXP's 0.18 µm embedded Flash process with on-chip voltage regulator for single 5V supply operation. The XGATE RISC co-processor offloads interrupt-driven peripheral servicing, freeing the main CPU for computation tasks. The device includes background debug mode (BDM) and a standard JTAG interface for in-circuit emulation. Typical applications include automotive body controllers, instrument clusters, HVAC controllers, and industrial automation controllers. A common use case is motor-driven HVAC flap control with CAN-based diagnostic reporting, where deterministic interrupt response and multi-channel ADC are essential. For new designs, evaluate whether the S12XE or S12XHY family members, with their enhanced XGATE and higher density RAM/Flash, offer cost advantages over the S12XD. Where ISO 26262 functional-safety compliance is required, the S12XFE or Cortex-M based parts must be considered instead. This page synthesizes distributor pricing, drop-in alternatives, and design notes drawn from NXP application notes that the manufacturer's product page does not consolidate in one place.

Cotización Contacto
MC9S12XD256VAA - 80MHz 256KB Flash 80-QFP MCU | NXP
MC9S12XD256VAA

MC9S12XD256VAA - 80MHz 256KB Flash 80-QFP MCU | NXP

The NXP MC9S12XD256VAA is a 16-bit HCS12X microcontroller operating at up to 80 MHz, with 256 KB of flash memory and an 80-QFP package measuring 14 x 14 mm. It combines a 32-bit HCS12X core architecture with embedded control peripherals for industrial and automotive-oriented embedded systems. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals such as timers, communications controllers, analog interfaces, and interrupt logic. The HCS12X family extends the HCS12 instruction set with enhanced addressing and an improved execution core, making MC9S12XD256VAA suitable for real-time control systems that require deterministic peripheral access and substantial embedded flash. Verified distributor information identifies a 256 KB flash configuration, 80 MHz operating speed, 16-bit HCS12X classification, and an 80-QFP package. Additional search data reports 14 KB of RAM, 119 I/O ports, and a 2.35 V to 2.75 V core-supply range for related indexed records, although those details should be confirmed against the exact NXP datasheet before design release. The device can serve as the central controller in industrial automation, automotive body electronics, motor control, communications gateways, and embedded instrumentation. Its 256 KB program memory accommodates larger control applications than many small 8-bit MCUs while retaining a mature real-time architecture. The 80 MHz core can execute control logic and service multiple peripherals, but final firmware performance depends on the selected clock configuration, memory wait states, peripherals, and toolchain settings. The 80-QFP footprint requires careful PCB layout and thermal management. Designers should follow the manufacturer package drawings for pad dimensions, pin numbering, exposed-pad requirements, and recommended land patterns. Because the supplied data does not provide a complete verified pinout, thermal resistance, or operating-temperature range, those values are intentionally marked for validation rather than guessed. This product page combines verified distributor specifications, package information, sourcing context, and application guidance. It does not substitute for the NXP datasheet, reference manual, errata, or device-specific qualification documents when those documents are required for a production design.

Cotización Contacto
MC9S12XD256VPV - 16-Bit HCS12X MCU 256KB Flash LQFP-112 | NXP
MC9S12XD256VPV

MC9S12XD256VPV - 16-Bit HCS12X MCU 256KB Flash LQFP-112 | NXP

The NXP (formerly Freescale) MC9S12XD256VPV is a 16-bit HCS12X microcontroller with 256 KB of on-chip Flash, 16 KB RAM and 4 KB EEPROM, packaged in a 112-pin LQFP (20x20 mm). It runs an enhanced HCS12X CPU core at up to 80 MHz bus clock with 32-bit internal arithmetic extensions for automotive body and chassis applications. A microcontroller (MCU) is a single-chip computer integrating a CPU, memory (Flash/RAM/EEPROM), and a rich set of peripherals such as timers, ADC, PWM, CAN and SCI/UART/SPI/I2C. The HCS12X family extends the legacy 16-bit HCS12 with an XGATE co-processor and increased performance, sitting between classic 8-bit MCUs (e.g. HC08, S08) and higher-end 32-bit Power Architecture parts like the MPC56xx and Kinetis families in NXP's automotive hierarchy. The 'XD' derivative in particular doubles the XGATE channels to 80 and is widely adopted for body controllers, gateway nodes and industrial motion control. Key features include 256 KB Flash with security, 16 KB RAM, 4 KB EEPROM, an XGATE co-processor delivering up to 80 MIPS of offloaded DSP-style I/O processing, dual CAN 2.0A/B controllers, an enhanced capture timer with 8 channels + 8 PWM, 16-channel 10-bit ADC, 8-channel 8-bit PWM and SCI/SPI/I2C interfaces. The part supports industrial-grade -40C to +85C operation and is well-suited to body electronics, instrument clusters, and LIN/CAN sub-nodes. Typical applications include automotive body control modules, HVAC controllers, instrument cluster slaves, industrial CAN nodes, sensor interfaces and lighting/ECM controllers. Two independent CAN channels plus the XGATE co-processor make the XD256 particularly strong in gateway and network-bridging roles. When designing with this MCU, ensure the BDM/debug pins are correctly pulled and that VDDR/VSS pair decoupling follows the datasheet reference layout. For low-EMI automotive layouts, place the 4 MHz crystal or resonator within 1 cm of the EXTAL/XTAL pins, and route the XCLKS/OCT route guarded by ground. This page consolidates real-time distributor pricing, drop-in LQFP-112 alternatives, and engineering design notes not present in the manufacturer datasheet, providing an at-a-glance decision support layer for procurement and design engineers.

Cotización Contacto
MC9S12XD64CAA - 16-bit 80MHz S12X MCU, 64KB Flash | NXP
MC9S12XD64CAA

MC9S12XD64CAA - 16-bit 80MHz S12X MCU, 64KB Flash | NXP

The NXP MC9S12XD64CAA is a 16-bit HCS12X microcontroller (MCU) delivering up to 80 MHz core clock, 64 KB of on-chip Flash, 4 KB of RAM, and 1 KB of EEPROM, housed in an 80-pin QFP (PQFP) surface-mount package. According to DigiKey product page 1791379, the device integrates an 8-channel 10-bit ADC and exposes up to 59 general-purpose I/O pins, targeting cost-sensitive automotive and industrial embedded systems. The HCS12X core extends the legacy HCS12 instruction set with an instruction queue, enhanced indexed addressing, and an extended instruction set while preserving the HCS12 programmer's model and interrupt stacking for software reuse. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (RAM), and peripheral interfaces (ADC, communication controllers, GPIO) into one package. Within the embedded hierarchy it sits at the node: microcontroller -> embedded processor -> semiconductor IC. The HCS12X family adds a wider internal bus and richer peripherals (CAN, SCI, SPI, PWM, timers) to the classic HCS12, while keeping the CISC architecture and 16-bit data path. MC9S12XD64CAA therefore occupies the cost-down tier of the S12XD sub-family, sharing its peripherals with higher-flash siblings such as MC9S12XD128/MC9S12XD256. Key features include 64 KB Flash with 4 KB RAM plus 1 KB EEPROM, an 80 MHz maximum CPU frequency driving a 40 MHz internal bus, and an 8-channel 10-bit ADC for analog sensing. Connectivity is supplied by CAN, SCI (UART), SPI, and I2C, while timers, PWM, and a watchdog provide real-time control. The 80-pin QFP (PQFP, 14x14 mm) exposes 59 GPIOs and supports 2.35 V - 2.75 V or 5 V operation per DigiKey/NXP specifications, enabling direct interface to 5 V sensors and actuators in automotive body and chassis applications. Architecturally the device uses the enhanced HCS12X core with an instruction queue that prefetches the next opcodes while the current one executes, raising throughput versus the legacy HCS12 at the same bus speed. The 40 MHz internal bus allows the periphery to run at half the CPU clock, balancing performance and EMI. NXP's CISC implementation is mature for deterministic interrupt response, which matters in CAN-driven automotive networks. The on-chip EEPROM and 64 KB Flash support in-application reprogramming via background debug mode (BDM). Typical applications include automotive body controllers, instrument clusters, CAN/LIN gateway nodes, industrial PLC I/O modules, and HVAC climate controllers where CAN connectivity, 5 V tolerance, and the HCS12 software ecosystem are decisive. The wide supply range and abundant timers suit brushed-motor and solenoid drivers. When designing with this device, allocate a 4.7 kohm pull-up on the RESET line, decouple VDD/VSSX with 100 nF plus bulk caps, and reserve the BKGD pin for in-circuit debugging; consult the NXP S12XD-family reference manual for BDPM/BDM details. Use the 80-pin QFP footprint pad pattern verbatim - this part is end-of-life so plan a migration to MC9S12XEQ512CAG or similar S12XD-family siblings if long-term production is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the NXP datasheet alone.

Cotización Contacto
MC9S12XD64MAA - 16-Bit 80MHz 64KB MCU | NXP | Automotive
MC9S12XD64MAA

MC9S12XD64MAA - 16-Bit 80MHz 64KB MCU | NXP | Automotive

NXP Semiconductors MC9S12XD64MAA is a 16-bit HCS12X automotive microcontroller operating at up to 80MHz, with 64KB of Flash memory and a 2.35V to 2.75V supply range, in an 80-pin QFP package. The verified listings identify automotive qualification, an S12X core, 59 I/O, and communication peripherals including CANbus, SPI, SCI, I2C, LINbus, and IrDA. A microcontroller is an integrated circuit that executes embedded software and coordinates a product's sensors, actuators, communications, and control functions. The HCS12X architecture provides a 16-bit instruction set compatible with the HCS12 family, an instruction queue, enhanced indexed addressing, and a programmer model compatible with HCS12 products. This places MC9S12XD64MAA within the hierarchy microcontroller, embedded processor, semiconductor, and automotive electronic control unit. The device combines 64KB of program Flash with 12KB of SRAM and supports both 2.5V and 5V operating descriptions in the supplied data. Its listed peripherals include CANbus, EBI/EMI, I2C, IrDA, LINbus, SCI, SPI, PWM, a watchdog timer, low-voltage detection, and power-on reset. These resources support embedded control and networking designs where deterministic interrupt handling and multiple communication interfaces are useful. At 80MHz, the S12X core targets control workloads requiring more computational headroom than an 8-bit MCU while retaining a mature 16-bit embedded ecosystem. The verified sources conflict on I/O counts: the NXP listing identifies 59 I/O, while one secondary source states 119 I/O. For conservative PCB and firmware planning, use the package pin assignments in the manufacturer documentation rather than treating both counts as interchangeable. Typical uses include automotive body and chassis controllers, CAN-based nodes, motor-control peripherals, instrument systems, gateways, and industrial controls adapted to the device's listed operating range. The -40°C to +125°C temperature rating makes the device suitable for harsh environments when the complete design, external components, and qualification requirements satisfy the application. Layout should preserve the QFP-80 footprint, decoupling requirements, clock stability, and exposed interface constraints from the manufacturer documentation. Because the NXP product page labels the part as end of life, engineers should confirm supply status before a new production release and validate any sourced inventory or alternative against pinout, memory, voltage, timing, and qualification requirements. This page consolidates manufacturer and distributor findings, lifecycle concerns, sourcing data, and engineering cautions that should be checked against the official NXP documentation before design commitment. The detailed alternative assessment is intentionally conservative because the supplied cross-reference results do not verify enough compatible drop-in parts.

Cotización Contacto
MC9S12XDG128MAA - 16-bit HCS12X MCU, 128KB Flash, 80MHz, 80-QFP | NXP
MC9S12XDG128MAA

MC9S12XDG128MAA - 16-bit HCS12X MCU, 128KB Flash, 80MHz, 80-QFP | NXP

The NXP MC9S12XDG128MAA is a 16-bit HCS12X family microcontroller IC featuring an enhanced HCS12X CPU core running at 80MHz, with 128KB of on-chip Flash memory and 12KB of RAM, housed in an 80-pin QFP (14x14mm) package. It is part of the S12XD sub-family and is engineered for industrial and automotive embedded applications requiring deterministic real-time control and CAN connectivity. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces (CAN, SPI, SCI, I2C), and GPIO. The HCS12X architecture from Freescale (now NXP) is a 16-bit CISC core that is upward-compatible with the legacy HC12/HCS12 instruction set, with enhancements including an instruction queue, enhanced indexed addressing, and interrupt stacking identical to the HCS12 programmer's model. The X-variant adds a peripheral co-processor (XGATE) for offloading interrupt-driven tasks. Key features include 128KB (128K x 8) of in-application programmable Flash, 12KB of RAM, an Enhanced Capture Timer (ECT), an 8-channel 10-bit ADC, multiple CAN 2.0 modules (msCAN), J1850/SCI/SPI interfaces, and an integrated voltage regulator for single 5V or 3.3V operation. The device supports background debug mode (BDM) and single-wire debug, simplifying in-circuit development and field updates. The S12XD architecture uses a unified memory map with Flash, RAM, and EEPROM in a single address space, and includes a Memory Protection Unit (MPU) and ECC on the Flash array. The XGATE co-processor can execute data-movement and peripheral-handling routines independently, freeing the main CPU for control-loop tasks. The 80-QFP (MAA suffix) package provides 80 general-purpose I/O lines with 5V tolerant inputs. Typical applications include automotive body and chassis ECUs, industrial CAN node controllers, building automation gateways, motor control (BLDC/PMSM) with CAN, and sensor-fusion nodes. Designers often pair the XGATE with an msCAN handler to achieve deterministic bus latency below 50 microseconds. Per the NXP product page, this part is flagged as End of Life and is not recommended for new designs - choose S12XEP or S12XET active variants for new programs.

Cotización Contacto
MC9S12XDP512CPV - 16-bit HCS12X MCU, 512KB Flash | NXP
MC9S12XDP512CPV

MC9S12XDP512CPV - 16-bit HCS12X MCU, 512KB Flash | NXP

The NXP (formerly Freescale) MC9S12XDP512CPV is a 16-bit microcontroller built on the HCS12X core with XGATE co-processor, 512KB Flash, 32KB SRAM, and 4KB EEPROM in a 112-pin LQFP package. It is part of the S12XD family targeting automotive body, chassis, and network gateway applications where deterministic interrupt handling and large on-chip memory reduce system BOM. A 16-bit microcontroller (MCU) is a programmable computing IC that integrates a CPU, memory, peripherals, and I/O onto a single silicon die. The HCS12X family extends the legacy HCS12 with the XGATE auxiliary processor, an independent RISC engine that offloads interrupt-driven tasks from the main CPU. This dual-processor architecture shortens event-to-action latency and is a key reason the S12XD family remains widely deployed in automotive body controllers and CAN/LIN gateway ECUs. Key features include 50 MHz bus frequency (up to 80 MHz on derivatives), 91 I/O pins, CAN 2.0A/B controllers (msCAN12 modules), SCI, SPI, I2C, an 8-channel PWM, and a 16-channel 10-bit ADC. The 4KB EEPROM supports byte-erasable non-volatile parameter storage for vehicle configuration and OBD-II diagnostic data. The 112-LQFP package exposes an External Bus Interface (EBI) for off-chip memory expansion or external peripheral addressing. Typical applications include automotive body control modules, HVAC controllers, instrument clusters, CAN/LIN gateways, and industrial automation PLCs. The wide operating temperature range (-40C to +85C for the CPV industrial-grade suffix) suits under-hood and cabin environments. The XGATE co-processor is particularly effective in CAN message routing where multiple bus frames per millisecond require offloaded processing. When designing with this MCU, allocate the XGATE vector table and data buffers in the first 4KB of SRAM to avoid cross-bar bus contention with the S12X core. Always validate Flash read-while-write behavior against your bootloader layout before committing to A/B partition schemes. Use the on-chip 4KB EEPROM for calibration constants rather than wear-intensive counters; for high-endurance counters, mirror them in a wear-leveled Flash sector.

Cotización Contacto
MC9S12XDP512MAG - 16-bit 80MHz 512KB Flash MCU | NXP
MC9S12XDP512MAG

MC9S12XDP512MAG - 16-bit 80MHz 512KB Flash MCU | NXP

The NXP MC9S12XDP512MAG is a 16-bit HCS12X automotive microcontroller with 512KB flash, 80MHz bus performance, and a 144-pin LQFP (20x20 mm) package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the embedded systems hierarchy, the MC9S12XDP512MAG belongs to the 16-bit microcontroller class, positioned above 8-bit MCUs like the HC908 family and below 32-bit MCUs like the MPC55xx or SPC5 families. The S12XD family targets automotive body, gateway, and multiplexing applications where rich peripheral integration matters more than raw computing power. Key features of the MC9S12XDP512MAG include 512KB of on-chip flash memory, 10-bit analog-to-digital conversion, and the enhanced HCS12X CISC core that is upward compatible with the HCS12 instruction set. According to NXP documentation, the family delivers 32-bit-class performance while retaining the efficiency and code density of a 16-bit architecture, with enhanced indexed addressing and an instruction queue for faster execution. Technically, the S12XD core uses a co-processor concept (XGATE on XDT/XEP derivatives) and an interrupt stacking model identical to HCS12, which simplifies migration from earlier S12 designs. The device operates from a 2.5V/5V supply scheme typical of automotive MCUs, and the 144-pin LQFP option includes an external bus interface for expanded memory designs, while 112-pin LQFP and 80-pin QFP variants omit the external bus. Typical applications include automotive body control modules, multiplexed networking gateways using CAN and LIN, instrument clusters, and industrial control systems that benefit from the high peripheral count and 5V-tolerant I/O. When designing with this device, verify the NRND (Not Recommended for New Designs) lifecycle status with NXP before committing to new designs; the MC9S12XDP512MAG is intended for existing designs and last-time-buy planning. This page synthesizes distributor pricing context, drop-in alternatives within the S12XD and related families, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12XDP512MAL - 16-Bit HCS12X MCU, 512KB Flash, 80MHz | NXP
MC9S12XDP512MAL

MC9S12XDP512MAL - 16-Bit HCS12X MCU, 512KB Flash, 80MHz | NXP

The NXP MC9S12XDP512MAL is a 16-bit microcontroller from the HCS12X family, integrating 512KB of Flash program memory, 32KB of RAM, and 4KB of EEPROM in a 112-pin LQFP package (20x20mm). Built around an enhanced HCS12X CPU core with a 40MHz bus and up to 80MHz peripheral clock, it delivers 32-bit-equivalent performance while remaining code- and pin-compatible with the HCS12 instruction set. The wide connectivity set (CANbus, EBI/EMI, I2C, IrDA, LINbus, SCI, SPI) and 91 general-purpose I/O lines make it a workhorse for automotive multiplexing applications. A microcontroller (MCU) is a single-chip computer that combines a CPU, memory, RAM, ROM/Flash, timers, and serial interfaces on one die. The MC9S12XDP512MAL belongs to the broader category: microcontroller -> 16-bit MCU -> HCS12X family -> HCS12X sub-family. Within a system hierarchy, this IC sits in the embedded control tier, between sensor/actuator interfaces and the application software layer. The on-chip peripherals make it a complete system-on-chip suitable for body, chassis, and powertrain subsystem designs. Key features include a 32-channel 10-bit ADC, an Enhanced Capture Timer (ECT) module, an 8-channel PWM unit, two inter-integrated circuit (IIC) controllers, up to six serial communication interfaces (SCI), three serial peripheral interfaces (SPI), and five controller area network (CAN) modules. The XGATE co-processor (2x peripheral clock, 160MHz peak) offloads interrupt-driven tasks from the main CPU, enabling efficient handling of high-speed serial streams. Hardware integrity features include Low Voltage Detect (LVD), Power-On Reset (POR), and a Watchdog Timer (WDT). The device operates from 2.35V to 2.75V core and supports 5V I/O on selected pins. The architecture pairs the HCS12X CPU with the XGATE peripheral co-processor over a common bus. Both cores access the same memory map, and the XGATE can service interrupts in parallel with CPU execution. The 80MHz peak peripheral clock and 40MHz bus clock enable deterministic interrupt latency suitable for time-critical CAN body domains. Internal Phase-Locked Loop (PLL) circuitry multiplies an external 4MHz crystal to derive the system clock, supporting Field Bus standards and automotive power management. Typical applications include automotive body control modules (BCM), door/window/seat controllers, HVAC climate control, instrument clusters, industrial PLC and motor control front ends, and LIN/CAN sub-system nodes. The automotive-grade qualification makes it well suited for harsh environment deployments. The MC9S12XDP512MAL distinguishes itself from earlier HCS12 variants via XGATE support, larger memory, and 5V-tolerant I/O, but requires careful attention to power-rail decoupling and PLL layout. Mass production boards should keep analog supplies and oscillator traces short and shielded to avoid EMI coupling into sensitive ADC inputs. This page synthesizes distributor pricing, drop-in alternatives, and design notes that are not found on the manufacturer datasheet.

Cotización Contacto
MC9S12XDP512MPV-FR - HCS12X 16-Bit MCU 80MHz 512KB Flash | NXP
MC9S12XDP512MPV-FR

MC9S12XDP512MPV-FR - HCS12X 16-Bit MCU 80MHz 512KB Flash | NXP

The NXP MC9S12XDP512MPV-FR is a 16-bit HCS12X family microcontroller running at 80 MHz with 512 KB on-chip Flash and 32 KB RAM, housed in a 112-pin LQFP (20x20 mm) package. Per the Verified Web Data, this part is qualified for the -40C to +125C automotive temperature range and ships in tape-and-reel ("FR") packaging. A 16-bit microcontroller (MCU) is a microprocessor core optimized for embedded control, integrating CPU, memory, and peripherals on a single die. HCS12X is NXP's 16-bit core family that extends the original HC12 with the XGATE co-processor for offloading interrupt-driven I/O tasks, allowing deterministic real-time response in automotive body, chassis, and powertrain applications. The MC9S12XDP512 belongs to the S12XD sub-family, which adds hardware support for CAN, SCI/SPI, and PWM peripherals used in vehicle networks. Key differentiating features include 512 KB of third-generation Flash with EEPROM-like byte-erase emulation, an XGATE 80 MHz RISC co-processor for parallel I/O servicing, four CAN 2.0A/B modules, an enhanced capture timer (ECT) with 8 channels, and up to 32 KB of on-chip RAM. The device supports background debug mode (BDM) for in-circuit programming and includes a 16-channel 10-bit ADC with 3 us conversion time. The MC9S12XDP512MPV-FR targets automotive body controllers, gateway modules, and industrial automation nodes where deterministic interrupt latency and high peripheral integration reduce external component count. The 112-pin LQFP exposes the full external bus interface (EBI) for memory expansion. NXP's S12XD family is widely deployed in OEM platforms with proven long-term supply continuity via Rochester Electronics, as reflected in current distributor listings. When designing with this MCU, ensure the BDM debugger is connected before applying power on first contact. The on-chip voltage regulator requires a stable 5V or 3V input - the -MPV suffix indicates the 5V variant. Decouple VDDR/VSSX pairs with one 100 nF ceramic per pin pair within 5 mm of the package. This page synthesizes NXP datasheet specifications, Rochester Electronics and Xecor live pricing, and a curated drop-in cross-reference set so engineers can evaluate sourcing risk and migration paths without leaving XAIPART.

Cotización Contacto
MC9S12XDP512VAL - 16-bit 80MHz HCS12X MCU 512KB Flash | NXP
MC9S12XDP512VAL

MC9S12XDP512VAL - 16-bit 80MHz HCS12X MCU 512KB Flash | NXP

The NXP MC9S12XDP512VAL is a 16-bit HCS12X microcontroller delivering 80 MHz CPU performance with 512 KB of on-chip Flash and a 112-pin LQFP package (20x20 mm). It belongs to the S12XD family that combines 32-bit-class peripheral integration with the proven HCS12 instruction set, targeting automotive multiplexing and body-network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals such as timers, ADC, communication controllers, and GPIO. The HCS12X architecture extends the HCS12 core with an enhanced indexed addressing mode, a hardware instruction queue, and an extended instruction set while remaining object-code compatible with legacy HCS12 code, easing migration of existing automotive platforms. Key features of the MC9S12XDP512VAL include 512 KB Flash organised as 512K x 8 with EEPROM emulation capability, an XGATE co-processor for offloading interrupt-driven peripheral servicing, multiple CAN 2.0A/B modules for in-vehicle networking, an 8/10/12-bit ATD (Analog-to-Digital) converter, and an enhanced capture timer. The wide 2.35 V to 2.75 V single-supply range (with 5 V-tolerant I/O on selected pins) simplifies integration with both 3.3 V and 5 V analog signal chains. The HCS12X core delivers up to 80 MHz bus operation, instruction queueing, and a separate XGATE auxiliary core that handles interrupt-driven peripheral tasks with deterministic latency. The peripheral set includes multiple MSCAN modules, SPI, SCI/UART, IIC, PWM, timers and an 8-channel ATD, allowing designers to consolidate several discrete controllers into a single chip. Typical applications include automotive body control modules, chassis controllers, gateway ECUs, CAN-based multiplexing networks, and industrial CAN-FD bridge nodes. Designers frequently choose this part for ECU upgrades where 16-bit code compatibility and large Flash headroom are both required. When designing with this device, ensure the integrated voltage regulator and external decoupling match the 2.5 V core rail requirements and that unused CAN pins are tied to defined logic levels to avoid bus-dominant faults. The 112-pin LQFP also requires careful PCB layout for the exposed thermal pad to dissipate peak current bursts from CAN drivers. This page synthesises distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers rapidly qualify the MC9S12XDP512VAL for both new designs and legacy platform refresh.

Cotización Contacto
MC9S12XDQ256VPV - 16-Bit 40MHz MCU 112-LQFP | NXP
MC9S12XDQ256VPV

MC9S12XDQ256VPV - 16-Bit 40MHz MCU 112-LQFP | NXP

The NXP Semiconductors MC9S12XDQ256VPV is a 16-bit CPU12 automotive-oriented microcontroller operating at up to 40 MHz and packaged in a 112-terminal LQFP. Verified listings identify an industrial temperature grade, gull-wing terminals, a square 20 mm x 20 mm LQFP package, 256 Kbytes of flash memory, and suitability for automotive multiplexing applications. The supplied evidence does not explicitly confirm RAM size, supply voltage, peripheral configuration, or pin assignments. A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, data memory, timers, serial interfaces, and input/output circuitry on one semiconductor device. Within the embedded-control hierarchy, the CPU12 MCU belongs to the 16-bit microcontroller, embedded processor, and semiconductor categories. It executes firmware for body, vehicle, and industrial control functions where deterministic control and peripheral integration can reduce the component count of a controller board. The MC9S12XD family is described by Freescale as delivering 32-bit performance while retaining the efficiencies of a 16-bit MCU. Verified distributor data specifically identifies the MC9S12XDQ256VPV as a CPU12 device with 40 MHz operation and 256 Kbytes of flash. Its 112-pin LQFP exposes substantially more I/O than a small 32- or 64-pin MCU, making the family suitable for multiplexing nodes that need multiple digital interfaces and automotive-network connectivity. The family datasheet is the appropriate authority for startup, clocking, memory organization, peripherals, electrical limits, timing, and pin multiplexing. Since the provided search excerpts do not contain the complete register or electrical tables, those values are not inferred here. Firmware replacement should therefore compare the complete pin function list, clock requirements, memory map, peripherals, voltage limits, package dimensions, and qualification requirements rather than relying only on the 40 MHz headline frequency. Typical uses include automotive body-control modules, multiplexing controllers, seat and climate-control electronics, lighting controllers, instrument-cluster electronics, and industrial embedded-control panels. In these systems, the MCU consolidates logic and interface handling while firmware coordinates sensor inputs and actuator outputs. The LQFP package is easy to inspect and solder but requires more board area and fine-pitch routing than a compact QFN package. Before layout, reserve all power, ground, reset, clock, programming, and multiplexed peripheral pins according to the datasheet. Preserve the required decoupling and oscillator-layout practices, then validate unused pins and boot configuration. Because automotive designs are especially sensitive to reset behavior, bus timing, transient immunity, and supply disturbances, use the manufacturer documentation for the exact device revision and qualification basis. This page combines the verified family-level position, exact package information, commercial listings, and engineering-oriented design cautions. It also distinguishes confirmed facts from unavailable specifications, avoiding unsupported claims while providing a practical basis for sourcing and initial design evaluation of the MC9S12XDQ256VPV.

Cotización Contacto
MC9S12XDQ512CPV - 16-Bit HCS12X MCU 512KB Flash LQFP-112 | NXP
MC9S12XDQ512CPV

MC9S12XDQ512CPV - 16-Bit HCS12X MCU 512KB Flash LQFP-112 | NXP

The NXP (formerly Freescale) MC9S12XDQ512CPV is a 16-bit HCS12X family microcontroller integrating 512KB of Flash, 32KB RAM, and 4KB EEPROM, housed in a 112-pin LQFP (20x20 mm) industrial-grade package with an operating temperature range of -40C to +85C. The device runs from 2.375V to 5.5V supply at up to 80 MHz bus clock and contains the CPU12X core, which adds XGATE coprocessor support for offloading interrupt-driven peripheral servicing, plus 91 external I/O pins across multiple package banks. An HCS12X microcontroller is a 16-bit automotive-grade MCU architecture descended from the original Freescale HC12 family; it scales the 68HC12 instruction set to an enhanced 80 MHz pipeline and adds an instruction-cycle-accurate data capture module plus the XGATE RISC coprocessor. Within the broader taxonomy it sits as: microcontroller -> 16-bit MCU -> HCS12X -> automotive body and chassis controllers. These parts also feed into powertrain nodes, body control modules, and CAN/LIN gateway designs thanks to their on-chip CAN, SPI, I2C, SCI and high-current PWM peripherals. Key features of the MC9S12XDQ512CPV include a 10-bit ADC with 8us conversion time, eight PWM channels for motor or lighting control, five CAN 2.0 A/B controllers, two SCI/UART, three SPI and two IIC modules, plus 8KB of Flash for EEPROM emulation. An on-chip voltage regulator enables single 5V supply operation, and the background debug mode (BDM) interface supports non-intrusive in-circuit programming and real-time debugging. A cyclic redundancy check (CRC) module accelerates data integrity operations commonly required for automotive networks. The architecture combines a 16-bit CPU12X core clocked from a Phase-Lock-Loop (PLL) with an XGATE coprocessor that can service interrupts in parallel with the main CPU - effectively doubling effective MIPS at high interrupt loads. The 512KB on-chip Flash is split into two banks for concurrent read/program, enabling in-application programming with zero-downtime firmware updates typical of body controllers and gateway modules. Typical applications include automotive body control modules (BCMs), CAN/LIN gateway nodes, HVAC climate controllers, instrument clusters, industrial CAN-based sensor aggregators, and stepper-motor-driven dashboard gauges. The wide 5V-tolerance, integrated CAN controllers, and high ESD robustness make it a mainstream choice for OEM and Tier-1 ECUs that need proven long-term supply. Industrial variants of the same silicon also serve 24V factory-automation I/O blocks and battery management auxiliaries where CAN is the backhaul. When designing with the MC9S12XDQ512CPV, place the 0.1uF and 4.7uF decoupling capacitors within 5 mm of each VDDF/VSS pair and keep traces short; inadequate decoupling is the most common root cause of PLL jitter and spurious resets in HCS12X layouts. Pull the RESET pin high through an external 4.7k pull-up to the regulator output and add a 1 nF capacitor to ground for noise immunity. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical PCB design notes not found in the standalone manufacturer datasheet, optimized for engineers evaluating or sourcing the part.

Cotización Contacto
MC9S12XDT256CAA - 16-bit 80MHz 256KB Flash MCU | NXP
MC9S12XDT256CAA

MC9S12XDT256CAA - 16-bit 80MHz 256KB Flash MCU | NXP

The NXP (Freescale) MC9S12XDT256CAA is a 16-bit HCS12X microcontroller with a 256KB (256K x 8) Flash memory, 80MHz core performance, and 59 general-purpose I/O lines, housed in an 80-pin QFP (14x14 mm) surface-mount package. A 16-bit microcontroller is an embedded processor whose internal data path, registers, and instruction handling operate on 16-bit words, placing it above 8-bit MCUs in arithmetic throughput while remaining far simpler than 32-bit parts. Within the power management and embedded control hierarchy, the MC9S12X family belongs to the HCS12X architecture, which is upward compatible with the widely deployed HCS12 instruction set, so interrupt stacking and the programmer's model remain identical to HCS12 while adding an instruction queue, enhanced indexed addressing, and an enhanced instruction set. Key features include the 16-bit HCS12X CISC CPU, 256KB on-chip Flash for code storage, industrial temperature operation from -40C to +85C, and a wide 2.35V to 5.5V operating supply per distributor listings, with a 10-bit ADC for analog sensing. The 80-QFP 14x14 mm gull-wing package supports standard surface-mount assembly. Technically, the S12XD series integrates the XGATE co-processor concept family heritage and peripheral set typical of automotive-grade 16-bit MCUs; per NXP, the MC9S12XDT256CAA is an S12XD 16-bit MCU with HCS12X core, 256KB Flash, 80MHz, QFP 80. Note that NXP currently lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate the newer S12XE or MagniV alternatives. Typical applications include body control modules, instrument clusters, industrial control systems, motor control, and legacy automotive networking nodes that rely on the HCS12X ecosystem and its CAN/LIN peripherals. A key design consideration: since the device is NRND, any new PCB design should verify long-term supply or select an active family member with the same 80-QFP footprint. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12XDT256CAG - 16-bit HCS12X MCU, 256KB Flash, 144-LQFP | NXP
MC9S12XDT256CAG

MC9S12XDT256CAG - 16-bit HCS12X MCU, 256KB Flash, 144-LQFP | NXP

The NXP MC9S12XDT256CAG is a 16-bit HCS12X microcontroller with 256KB program Flash, 80 MHz CPU, and 144-pin LQFP (20x20) package. The 'CAG' suffix denotes the 144-LQFP operating range -40C to +85C, targeted at automotive multiplexing and body-electronics applications. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO on a single die. The MC9S12XDT256CAG belongs to the S12XD family that delivers 32-bit-like performance while preserving the HCS12 instruction set for code reuse. As a derivative of the broader Freescale/NXP HCS12 lineage, it sits in the category: MCU -> microcontroller -> embedded processor -> semiconductor. Key features include 256KB Flash, 16KB RAM, 4KB EEPROM, 119 I/O lines, 8/16-bit PWM, up to 8 timer channels, MSCAN (CAN 2.0A/B) controller, SCI/SPI serial interfaces, 16-channel 10-bit ADC, and a 5V-tolerant I/O. The XGATE co-processor offloads interrupt-driven tasks from the main CPU, effectively doubling throughput for I/O-bound automotive workloads. Internal Phase-Locked Loop (IPLL) generates the 80 MHz bus clock from an external 4-16 MHz crystal. The architecture uses an enhanced 16-bit CISC core with 20-bit ALU extensions, instruction queue, and enhanced indexed addressing. XGATE is an independent RISC-style peripheral co-processor that runs concurrent to the CPU and is ideal for processing CAN, LIN, and SPI traffic in real time. The device operates from a single 2.5V core / 5V I/O supply pair, simplifying automotive 12V rail design. Typical applications include automotive body controllers (BCM), gateway modules, instrument clusters, HVAC control, door modules, seat controllers, and industrial CAN-node controllers. The 5V I/O tolerance and on-chip MSCAN make it ideal for any 12V-board automotive multiplexing network. When designing, pay attention to decoupling: place 100nF ceramic + 4.7uF bulk on VDDR/VSS, plus 10uF on VDDX/VSSX. Use NXP's BDM (Background Debug Mode) interface via the BKGD pin for in-circuit programming. The PLL reference loop filter (XFC pin) capacitor selection is critical for jitter performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12XDT256CPV - 16-bit HCS12X MCU, 256KB Flash, 112-LQFP | NXP
MC9S12XDT256CPV

MC9S12XDT256CPV - 16-bit HCS12X MCU, 256KB Flash, 112-LQFP | NXP

The NXP MC9S12XDT256CPV is a 16-bit HCS12X CISC microcontroller with 256KB on-chip Flash, 40 MHz CPU speed, and 2.5V/5V dual-voltage operation, housed in a 112-pin LQFP (20x20 mm) package. It belongs to the S12XD family and targets automotive multiplexing applications, delivering 32-bit-style performance through the XGATE co-processor while retaining the HCS12 instruction set for code compatibility. An HCS12X microcontroller (MCU) is a 16-bit automotive-grade microcontroller that combines the legacy HCS12 instruction set with an XGATE peripheral co-processor to offload interrupt-driven tasks. It sits in the broader category: MCU -> 16-bit MCU -> HCS12X -> automotive MCU -> embedded processor -> semiconductor. The XGATE engine delivers up to 80 MIPS on peripheral events while the S12X CPU runs the application code, enabling deterministic real-time response in body, chassis, and gateway ECUs. Key specifications include 256KB of program Flash with 4KB EEPROM and 12KB RAM, an 80 MHz XGATE peripheral co-processor, a 25/40 MHz CPU bus, an enhanced Capture Timer (ECT), four PWM channels with 8-bit or 16-bit resolution, up to two CAN 2.0A/B modules, two SCI, two SPI, an I2C bus, and an 8-channel 10-bit ATD (ADC). The 112-LQFP industrial temperature grade supports -40C to +85C, suiting under-the-hood and body-control modules. Architecturally the device pairs the HCS12X CPU with the XGATE RISC co-processor, allowing peripheral DMA-style servicing. It supports background-debug mode (BDM), on-chip voltage regulator, and a periodic interrupt timer. The 112-LQFP package supports external address/data bus expansion, suitable for multi-drop automotive networks. Typical applications include automotive body control, CAN/LIN gateway nodes, HVAC modules, instrument cluster MCUs, and industrial multiplexing controllers. The wide 2.5V/5V supply range simplifies integration into legacy 5V analog/mixed-signal automotive subsystems while preserving modern peripherals. When designing with this part, ensure decoupling caps are placed close to VDD/VSS pairs and that unused pins are configured to a defined state in software to avoid shoot-through. The XGATE initialization must be performed before peripheral interrupts are enabled. This page synthesizes distributor pricing, automotive-same-family drop-in alternatives, and practical firmware boot notes that complement the manufacturer datasheet reference manual.

Cotización Contacto
MC9S12XDT256MAA - 16-bit 80MHz 256KB Flash MCU | NXP
MC9S12XDT256MAA

MC9S12XDT256MAA - 16-bit 80MHz 256KB Flash MCU | NXP

The NXP Semiconductors MC9S12XDT256MAA is a 16-bit HCS12X microcontroller running at 80 MHz with 256KB (256K x 8) Flash program memory and 16KB RAM, housed in an 80-pin QFP (14x14 mm) surface-mount package. A 16-bit microcontroller (MCU) is a single-chip computing device whose arithmetic logic unit and internal data paths are 16 bits wide. The MC9S12XD family sits within the broader HCS12X / S12XD hierarchy of automotive-oriented microcontrollers, which themselves belong to the microcontroller unit (MCU) class of embedded processors. MCUs integrate CPU, memory, and peripherals on one die, making them the control backbone of body electronics, gateways, and industrial nodes. Key features include the 16-bit HCS12X CISC core, upward compatible with the HCS12 instruction set, delivering 32-bit-class performance with 16-bit efficiency. Peripherals include CANbus, EBI/EMI external bus interface, I2C, IrDA, LINbus, SCI, and SPI connectivity, plus PWM, watchdog timer (WDT), low-voltage detect (LVD), and power-on reset (POR). The enhanced indexed addressing and instruction queue improve code density and interrupt latency versus legacy HCS12 devices. Architecturally, the S12XD family was targeted at automotive multiplexing applications, where its XGATE-style co-processor concept and rich CAN/LIN mix offload communication processing from the main core. The 256KB Flash supports single-chip designs without external memory, and the 5V-tolerant I/O structure suits harsh 12V automotive electrical environments. Typical applications include automotive body control modules, gateway nodes bridging CAN and LIN networks, dashboard and instrumentation clusters, and industrial control systems that benefit from 5V noise immunity. A key design consideration is lifecycle status: NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate S12XE/XS family successors while the XDT256 remains ideal for maintaining existing designs. This page synthesizes distributor inventory data, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, delivering information gain beyond standard catalog listings.

Cotización Contacto
MC9S12XDT256MAG - 16-bit HCS12X MCU 256KB Flash 144-LQFP | NXP
MC9S12XDT256MAG

MC9S12XDT256MAG - 16-bit HCS12X MCU 256KB Flash 144-LQFP | NXP

The NXP MC9S12XDT256MAG is a 16-bit HCS12X microcontroller IC running at 80MHz with 256KB (256K x 8) of on-chip Flash, housed in a 144-pin LQFP (20x20) package. It belongs to NXP's S12XD family, which extends the HCS12 architecture with an enhanced indexed addressing mode, instruction queue, and interrupt stacking compatible with the original HCS12 instruction set. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable I/O peripherals. The HCS12X family sits at the top of the 16-bit automotive microcontroller hierarchy: HCS12X core -> HCS12 family -> 16-bit MCU -> automotive microcontroller -> embedded processor -> semiconductor IC. Within NXP's S12X portfolio, the S12XD sub-family adds hardware XGATE co-processor support and dual-memory Flash, enabling deterministic peripheral offload for real-time control. Key features include 256KB Flash, up to 12KB RAM, multiple SCI/SPI/I2C interfaces, enhanced capture timers, 10-bit ADC, and PWM channels suitable for motor and body-control applications. The 80MHz CPU bus enables efficient real-time task scheduling without an external DSP. The device integrates a CAN 2.0 module, supporting automotive network stacks. Architecturally, the S12XD combines a 16-bit HCS12X core with a RISC-style XGATE auxiliary processor that handles interrupt-driven peripheral I/O at up to 80MHz, freeing the main CPU for application logic. This dual-core approach delivers predictable latency for time-critical events such as sensor sampling and actuator control. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, industrial PLCs, and CAN-node end equipment. The wide operating temperature range and integrated CAN make it well suited for under-hood and chassis subsystems. When designing with this part, ensure the BDM (Background Debug Mode) interface is accessible for in-circuit programming and that the PLL filter network follows the manufacturer's reference layout. The 144-LQFP package requires careful thermal copper pour design under the exposed pad to maintain junction temperature in enclosed housings. This page synthesizes authorized distributor stock, same-family NXP drop-in alternatives, and practical design notes beyond what appears in the manufacturer datasheet - including lifecycle status, AEC-Q100 grade context, and pin-compatible upgrade paths for engineers managing EOL transitions.

Cotización Contacto