Microcontroladores

Productos (20.000+)

MC9S12XDT256MAL - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP
MC9S12XDT256MAL

MC9S12XDT256MAL - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP

The NXP MC9S12XDT256MAL is a 16-bit HCS12X microcontroller with 256KB of Flash, 80MHz CPU clock, and 112-pin LQFP (20x20 mm) packaging for automotive body and chassis modules. The HCS12X core extends the HCS12 instruction set with enhanced indexed addressing, an instruction queue, and interrupt stacking compatible with HCS12, while integrating XGATE co-processors for deterministic peripheral offload. An automotive microcontroller is a single-chip computer integrating CPU, memory, I/O peripherals, and communication interfaces designed to operate reliably in harsh vehicle environments (under-hood temperature swings, EMI, vibration). Within the broader semiconductor hierarchy, microcontrollers belong to integrated circuits -> microcontrollers -> 16-bit/32-bit MCUs -> automotive-grade ECUs. The MC9S12XDT256MAL sits in the HCS12X family targeted at body electronics, gateway modules, and central body controllers requiring LIN/CAN connectivity and real-time determinism. Key features include 256KB on-chip Flash (256K x 8), 2.5V/5V supply operation, integrated CAN and SCI/SPI peripherals, PWM and timer modules for motor control, and an A/D converter for sensor acquisition. The device supports extended operating temperature ranges appropriate for automotive AEC-Q100 qualified applications. The 112-LQFP package provides ample I/O for body controller requirements. Technically, the HCS12X core delivers up to 80MHz bus clock with sophisticated interrupt handling, while XGATE co-processors allow deterministic peripheral servicing without CPU intervention. The architecture balances Flash endurance, EEPROM emulation, and security features such as memory protection units, making it suitable for locked-immobilizer-style applications seen in central body modules. Typical applications include automotive body ECUs, central body modules with immobilizer functions, gateway ECUs bridging CAN/LIN networks, instrument cluster controllers, climate control modules, and industrial CAN-based control nodes. The 16-bit core, automotive temperature grade, and AEC-Q100 lineage make this MCU well-matched to vehicle networks where deterministic response and reliability are mandatory. When designing with this part, ensure proper decoupling near all supply pins, follow NXP's recommended oscillator layout guidelines for EMC compliance, and confirm extended-temperature qualification against your application's thermal envelope. Designers migrating from older HCS12 parts benefit from full instruction-set compatibility, simplifying firmware porting. This page consolidates distributor pricing, drop-in alternatives within the HCS12X family, and practical design notes not found in the manufacturer datasheet summary.

Cotización Contacto
MC9S12XDT256VAA - 16-bit HCS12X MCU 256KB Flash 80MHz | NXP
MC9S12XDT256VAA

MC9S12XDT256VAA - 16-bit HCS12X MCU 256KB Flash 80MHz | NXP

The NXP MC9S12XDT256VAA is a 16-bit HCS12X-family microcontroller with 256KB on-chip Flash, 80MHz CPU speed, and a 10-bit ADC, housed in an 80-pin QFP (14x14 mm) package. Per the NXP product page, this part is flagged NRND (Not Recommended for New Designs), indicating that it remains in production for existing customers but NXP is steering new designs toward newer S12X/S12XE families. An MCU (microcontroller) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (RAM), peripherals (timers, ADC, communication interfaces), and interrupt logic into one device. Within the semiconductor taxonomy, an MCU sits under microprocessor -> microcontroller -> embedded controller, and the HCS12X series specifically targets automotive body, chassis, and powertrain applications where deterministic interrupt response and CAN connectivity are critical. Key features of the MC9S12XDT256VAA include 256KB (256K x 8) Flash, 12KB RAM, an enhanced XGATE coprocessor for offloading interrupt-driven tasks from the main CPU, multiple CAN 2.0 controllers, an 8-channel 10-bit ADC, and an SCI/SPI/I2C peripheral set. The HCS12X core is upward-compatible with the HCS12 instruction set while adding an instruction queue and enhanced indexed addressing modes. Architecturally, the HCS12X core pairs the legacy CISC S12 CPU with the XGATE RISC-style coprocessor that runs at 80MHz and can service peripheral interrupts autonomously, effectively doubling real-time throughput for I/O-heavy applications. The part operates from a 2.5V/5V supply rail, making it compatible with both 3.3V and 5V automotive sensor networks. Typical applications include automotive body control modules, CAN gateway nodes, instrument clusters, HVAC controllers, and industrial CAN-based sensor hubs. The wide operating voltage and integrated CAN make it especially suited to in-vehicle networking where EMC robustness is required. Design consideration: because the part is NRND, validate long-term supply with NXP before committing new designs; PCN windows and last-time-buy dates should be confirmed via the NXP product page. Ensure your PCB footprint matches the 80-QFP (14x14) land pattern and that your linker script reserves the XGATE memory region correctly. This page synthesizes distributor pricing, drop-in S12XD-family alternatives, and practical design notes not always consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12XDT256VAL - 16-Bit 80MHz HCS12X MCU 256KB Flash | NXP
MC9S12XDT256VAL

MC9S12XDT256VAL - 16-Bit 80MHz HCS12X MCU 256KB Flash | NXP

The NXP MC9S12XDT256VAL is a 16-bit HCS12X microcontroller (MCU) running at 80 MHz with 256 KB on-chip Flash, 16 KB RAM, 4 KB EEPROM and an integrated XGATE co-processor, housed in a 112-pin LQFP (20 x 20 mm) package for automotive body and chassis applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), non-volatile storage (EEPROM) and a rich set of peripherals. The HCS12X family extends the legacy HCS12 architecture with an enhanced instruction set, instruction queue, enhanced indexed addressing, and an XGATE peripheral co-processor that offloads interrupt-driven I/O for deterministic real-time response. Within the broader taxonomy: MCU -> 16-bit microcontroller -> automotive microcontroller -> body/chassis ECU controller -> semiconductor. Key features of the MC9S12XDT256VAL include a 16-channel 10-bit ADC, up to 91 general-purpose I/O lines, multiple CAN 2.0 controllers (msCAN), SPI, I2C, SCI/UART, an 8-channel PWM, and a periodic interrupt timer. The device operates from a single 2.5 V core / 5 V I/O supply and supports background debug mode (BDM) for in-circuit development. The HCS12X CPU executes CISC instructions at 80 MHz, while the XGATE RISC co-processor runs at twice the bus speed to handle high-rate peripheral events with predictable latency. The 256 KB Flash is organized as 256K x 8 and supports erase/program operations across -40C to +125C, making the part suitable for under-hood and body-control modules. Typical applications include automotive body controllers, gateway/Bridge ECUs between CAN and LIN networks, instrument clusters, HVAC control modules, seat and door zone modules, and industrial CAN-based distributed I/O. The wide peripheral mix also supports battery-management slaves and 24 V industrial sensor hubs. When designing with this MCU, ensure the 5 V analog supply (VDDA) and 2.5 V digital supply (VDDR) are decoupled with 100 nF + 4.7 uF ceramic capacitors placed within 5 mm of the respective pins. Route the oscillator traces shorted and guarded; for EMI-sensitive automotive designs place a guard ring around the EXTAL/XTAL pins and keep them away from switching nodes. The LQFP-112 footprint dissipates up to ~1 W with a proper copper pour on the exposed pad tie-off. This page synthesizes distributor pricing, verified drop-in alternatives from the HCS12XD family, and practical PCB design notes that supplement the manufacturer datasheet and accelerate engineering decisions.

Cotización Contacto
MC9S12XDT384MPV - 16-Bit 384KB Flash Automotive MCU | NXP
MC9S12XDT384MPV

MC9S12XDT384MPV - 16-Bit 384KB Flash Automotive MCU | NXP

The NXP Semiconductors MC9S12XDT384MPV is a 16-bit HCS12X automotive microcontroller with 384 KB of flash memory, an 8 MHz system clock, a 10-bit ADC, and a 112-terminal LQFP package. It is designed for automotive multiplexing applications requiring 32-bit-class performance benefits in a 16-bit MCU architecture. The device is identified as automotive grade and supplied in a square 20 mm by 20 mm gull-wing LQFP package. An automotive microcontroller is an embedded semiconductor that executes control software, reads sensors, controls actuators, and manages communication interfaces within a vehicle. The HCS12X family combines a 16-bit MCU with higher-performance execution capabilities and belongs to the broader embedded-controller hierarchy: HCS12X automotive MCU, embedded microcontroller, semiconductor, and electronic component. It is intended for applications where deterministic control, connectivity, and operating reliability are important. Verified distributor data identifies the MC9S12XDT384MPV with 384 KB of flash, an 8 MHz clock, a 10-bit ADC, and a 2.35 V to 2.75 V supply range. Its 112 gull-wing terminals make it suited to designs requiring numerous external signals, mixed automotive subsystems, and dedicated communication or control functions. The automotive temperature classification identifies the part for vehicle-oriented designs, although detailed temperature limits were not present in the supplied verification data. The MC9S12XDT384MPV is associated with the S12XD family and is intended for automotive multiplexing applications. Its architecture and peripheral mix should be evaluated against the specific vehicle network, actuator load, sensor signal range, memory requirements, and qualification obligations. Because the available data does not provide verified operating-temperature, memory-map, communication-protocol, or ADC-performance details, those values must be confirmed in the manufacturer datasheet before design release. Typical application domains include body and multiplexing control modules, automotive gateway logic, distributed vehicle controllers, sensor-conditioning systems, actuator controllers, and embedded automotive communication hubs. The 112-terminal LQFP package exposes more I/O than a small controller package and can reduce the need for external interface expansion when the board area permits. When selecting this MCU, verify package dimensions, pin multiplexing, supply sequencing, clock requirements, peripheral availability, automotive qualification status, and software-tool support. Do not assume that a distributor cross-reference result guarantees pin-to-pin or software compatibility. This page consolidates verified distributor specifications, sourcing information, package details, application guidance, and explicit data gaps. It is intended to accelerate initial engineering review while preserving traceability to the supplied manufacturer and distributor records.

Cotización Contacto
MC9S12XDT512CAA - 16-Bit HCS12X MCU 512KB Flash | NXP
MC9S12XDT512CAA

MC9S12XDT512CAA - 16-Bit HCS12X MCU 512KB Flash | NXP

The NXP MC9S12XDT512CAA is a 16-bit HCS12X-family microcontroller operating at 80 MHz, integrating 512 KB of Flash, 20 KB of RAM, and 4 KB of EEPROM in an 80-pin PQFP (14x14 mm) package. It is targeted at automotive multiplexing, body electronics, and safety-critical chassis applications where 32-bit-style peripheral integration is required on a 16-bit CISC architecture. The bus runs at 40 MHz, and the device supports a wide operating voltage range with both 3.3 V and 5 V analog/mixed-signal domains. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), working memory (RAM), non-volatile storage (EEPROM/Data Flash), and a rich set of peripherals (timers, ADC, SCI/SPI, CAN, PWM, GPIO) on a single die. The HCS12X line is the enhanced superset of the original HCS12 core, retaining upward source/binary compatibility while adding an instruction queue, enhanced indexed addressing modes, and an extended instruction set. Within the broader taxonomy, the MC9S12XDT512CAA belongs to: microcontroller -> embedded MCU -> automotive MCU -> HCS12X family -> S12XD sub-family. Key differentiating features include the 16-channel enhanced capture timer (ECT) module, an 8-channel 10-bit ADC, up to 59 general-purpose I/O pins, integrated CAN 2.0 (msCAN) controllers for in-vehicle networking, and an on-chip voltage regulator for single 5 V supply operation. The XDT suffix denotes the higher-density Flash sub-family with the XGATE co-processor disabled in this mask set, simplifying real-time interrupt handling. The device is rated -40C to +85C industrial and is qualified to AEC-Q100 for automotive deployments. The architecture is a CISC Harvard-style core with a 16-bit ALU, 20-bit indexed addressing, and a hardware instruction queue that lets the bus fetch the next opcode while the ALU executes the current one. This combination delivers effective throughput close to a 32-bit MCU on byte- and bit-oriented control code, while keeping the interrupt latency and register model identical to legacy HCS12 designs - allowing code reuse for OEMs with large HCS12 code bases. Typical applications include automotive body controllers, gateway modules, CAN-based lighting and HVAC controllers, instrument clusters, and industrial PLC edge nodes. The wide supply range (2.35 V to 5.5 V) and on-chip EEPROM allow direct connection to 12 V automotive rails after external transients are clamped. When designing with the MC9S12XDT512CAA, allocate BDM (background debug mode) pins to a 6-pin header on the PCB for in-circuit debug and Flash programming. Ensure the ECLK/XIRQ/IRQ pins have proper pull-ups per NXP recommendations, and place the internal voltage regulator's bulk capacitor close to the VREG pin to minimize digital noise coupling into the ADC reference.

Cotización Contacto
MC9S12XDT512CAG - 16-bit 80MHz 512KB Flash MCU | NXP
MC9S12XDT512CAG

MC9S12XDT512CAG - 16-bit 80MHz 512KB Flash MCU | NXP

The NXP MC9S12XDT512CAG is a 16-bit HCS12X microcontroller operating at up to 80 MHz with 512 KB (512K x 8) of on-chip Flash memory, housed in a 144-pin LQFP (20x20 mm) surface-mount package. A microcontroller unit (MCU) is a single-chip embedded processor that integrates a CPU core, program memory, data memory, and peripheral functions such as timers, communication interfaces, and analog-to-digital converters on one die. Within the semiconductor hierarchy, the MC9S12XDT512CAG belongs to the 16-bit microcontroller class, part of the broader family of embedded processors used in automotive and industrial control systems, sitting above simple 8-bit MCUs and below 32-bit application processors. Key features include the enhanced HCS12X CPU core, upward compatible with the HCS12 instruction set, which preserves code compatibility and programmer's model for legacy HCS12 designs. The XGATE co-processor architecture of the S12XD family offloads interrupt handling and communication tasks, letting the main CPU achieve 32-bit-class throughput with 16-bit efficiency. The device integrates 119 general-purpose I/O lines, a 16-channel 10-bit ADC, and multiple serial interfaces including CAN, SCI, and SPI, targeting automotive multiplexing networks. The S12XD family architecture combines a CISC-style CPU12X core with an interrupt dispatch mechanism that reduces latency, which is why NXP positioned it as delivering 32-bit performance with 16-bit advantages. Flash program memory of 512 KB supports large application images typical of body control modules, gateways, and instrument clusters. The supply voltage of 2.35 V to 2.75 V (2.5 V nominal class) reflects the core supply regulation approach used across this generation of S12X devices. Typical applications include automotive body electronics, gateway modules, industrial automation controllers, and motor management systems where CAN networking and deterministic interrupt response are required. When designing with this MCU, confirm current lifecycle status: NXP lists the part as NRND (Not Recommended for New Designs), so new designs should evaluate the S12XE successors or migrate to 32-bit alternatives. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto
MC9S12XDT512MAA - 16-bit 80MHz HCS12X MCU 512KB | NXP
MC9S12XDT512MAA

MC9S12XDT512MAA - 16-bit 80MHz HCS12X MCU 512KB | NXP

The NXP MC9S12XDT512MAA is a 16-bit HCS12X (S12XD family) microcontroller running at up to 80 MHz with 512KB (512K x 8) of internal Flash, housed in an 80-pin QFP (14x14 mm) surface-mount package. According to NXP product data, it also integrates 20KB of RAM, a 4KB EEPROM, an 8-channel 10-bit ADC, and 59 general-purpose I/O pins. A 16-bit microcontroller is a self-contained computing IC that executes a program from internal non-volatile memory and interfaces with sensors, actuators, and communication buses. Within the product hierarchy, the MC9S12XDT512MAA belongs to the microcontroller category under embedded processors, positioned as a cost-effective automotive and industrial MCU from the broader NXP (formerly Freescale) HCS12/HCS12X powertrain and body-electronics portfolio. Key features include the enhanced HCS12X CISC core, upward compatible with the HCS12 instruction set, plus a co-processed XGATE-style architecture heritage in the S12XD family that offloads interrupt-driven tasks. Peripheral integration covers CANbus, LINbus, I2C, SPI, SCI, and IrDA connectivity, along with PWM, watchdog timer (WDT), low-voltage detect (LVD), and power-on reset (POR) functions. The 512KB Flash supports large C applications without external memory. Technically, the device executes from an instruction queue and provides enhanced indexed addressing modes, reducing code size and interrupt latency versus the older HCS12. The single-chip architecture keeps the analog front end (10-bit ADC) and timing units on the same die as the CPU, minimizing external components in EMI-sensitive automotive environments. Typical applications include automotive body control modules, gateway nodes bridging CAN and LIN networks, and industrial control units that need Flash-resident firmware with robust bus communication. A key design consideration is lifecycle status: NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate NXP's recommended successors or verify long-term supply before design-in. This page synthesizes distributor availability data, drop-in alternative candidates, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12XDT512MAL - 16-bit HCS12X MCU 512KB Flash 80MHz LQFP-112 | NXP
MC9S12XDT512MAL

MC9S12XDT512MAL - 16-bit HCS12X MCU 512KB Flash 80MHz LQFP-112 | NXP

The NXP MC9S12XDT512MAL is a 16-bit HCS12X microcontroller delivering 80 MHz CPU performance with 512 KB of on-chip Flash and 20 KB of RAM, housed in a 112-pin LQFP package (20x20 mm). The part belongs to NXP's S12XD family, which extends the legacy HCS12 instruction set with an enhanced indexed-addressing mode, an instruction queue, and richer interrupt stacking. Operating voltage spans 2.5 V and 5 V rails, suiting both 3.3 V and 5 V automotive/industrial subsystems. The 80 MHz bus speed and CAN, LIN, SCI, SPI, I2C, and IrDA connectivity make it a fit for distributed body and powertrain nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, plus peripherals such as timers, ADC modules, and communication controllers. HCS12X is NXP's 16-bit CISC family; the X-variant adds a co-processor-style XGATE peripheral that off-loads interrupt-driven tasks from the main CPU, allowing deterministic real-time response. Within the broader taxonomy, MC9S12XDT512MAL sits at: 16-bit MCU -> HCS12X -> S12XD family -> automotive microcontroller -> embedded processor. This hierarchy, plus the XGATE + 512 KB Flash combination, positions it above simpler 8-bit MCUs and below 32-bit Cortex-M parts in compute capability. Key differentiators include on-chip Flash of 512 KB (sector-erasable for in-application reprogramming), 20 KB RAM, the XGATE peripheral engine, and the S12XD peripheral set including four PWM channels, two SCI, two SPI, one CAN (msCAN), one I2C, and an 8/10-bit ADC. Boundary-scan (JTAG/Nexus) and on-chip debug are supported via BDM. Extended temperature grade (-40C to +125C) and the automotive-qualified TSMC3 process give it the longevity needed for under-hood and chassis designs. Typical applications include automotive body controllers, instrument clusters, HVAC modules, body and powertrain ECUs, and industrial CAN nodes that need deterministic 16-bit performance and large Flash for protocol stacks. The CAN + LIN + SCI combo is the classic automotive gateway layering. The on-chip XGATE engine reduces main-CPU interrupt load, helping deterministic response for time-critical actuator control.

Cotización Contacto
MC9S12XDT512MPV - 80MHz 512KB 16-Bit MCU | NXP
MC9S12XDT512MPV

MC9S12XDT512MPV - 80MHz 512KB 16-Bit MCU | NXP

The NXP Semiconductors MC9S12XDT512MPV is a 16-bit HCS12X microcontroller operating at up to 80 MHz, with 512 KB of Flash memory, in a 112-pin LQFP package. The device is identified in the supplied distributor data as automotive-temperature grade and uses a gull-wing, square LQFP package with 112 terminals. The HCS12X MCU family combines a 16-bit microcontroller architecture with automotive-oriented multiplexing capabilities. The MC9S12XDT512MPV is intended for embedded control systems where deterministic control, substantial Flash storage, and a broad package footprint are useful. The verified data describes the part as a 16-bit MCU with an HCS12X core, 2.5 V/5 V operation, 512 KB Flash, and an 80 MHz maximum frequency. The device belongs to the broader embedded-control hierarchy: microcontroller → 16-bit MCU → HCS12X family → automotive-oriented control platform. Compared with a simple 8-bit MCU, the HCS12X architecture provides greater processing capacity for control loops, communication management, and system integration. Compared with a high-end 32-bit MCU, it retains the efficiency and code-size advantages associated with the S12X family. The supplied data confirms an 80 MHz operating speed, 512 KB Flash, 16-bit architecture, 112-pin LQFP construction, and automotive temperature-grade classification. Exact RAM size, EEPROM size, peripheral list, supply-current figures, operating-temperature limits, pin names, and electrical timing values were not provided in the verified data and therefore require manufacturer-datasheet confirmation before schematic or PCB release. Typical design uses include automotive body and multiplexing controllers, distributed control modules, actuator and sensor coordination, industrial control equipment, and communication gateways. The 112-pin package provides a large pin count relative to smaller MCU packages, but it also requires careful high-density PCB layout and reliable power distribution. The external evidence specifically associates the S12X family with automotive multiplexing and emphasizes low cost, low power consumption, EMC performance, and code-size efficiency. For a new design, engineers should verify memory-map details, multiplexing assignments, peripheral availability, clock configuration, and package-specific pin compatibility in the official MC9S12XD documentation. If the device is being substituted, package identity alone is insufficient: flash organization, RAM, peripheral mapping, voltage, timing, and software support must all be checked. This page synthesizes the verified distributor information, package data, and design cautions without filling missing technical values by inference.

Cotización Contacto
MC9S12XDT512VAG - 16-bit HCS12X MCU, 512KB Flash, 144-LQFP | NXP
MC9S12XDT512VAG

MC9S12XDT512VAG - 16-bit HCS12X MCU, 512KB Flash, 144-LQFP | NXP

The NXP MC9S12XDT512VAG is a 16-bit HCS12X microcontroller IC running at 80 MHz with 512 KB of on-chip Flash memory (512K x 8) and a 144-pin LQFP package (20x20 mm). It is part of the HCS12X family that delivers 32-bit-style performance while retaining the architecture advantages and code efficiency of a 16-bit MCU, and is targeted at automotive multiplexing and body-network applications. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. The HCS12X is NXP's 16-bit MCU family; the MC9S12XDT512VAG specifically uses the S12X core with an XGATE co-processor that offloads interrupt-driven tasks to improve real-time response in CAN/LIN gateway use cases. As a member of the microcontroller category within power management, the device sits in the broader hierarchy of embedded processors -> microcontrollers -> automotive MCUs. Key features include 512 KB Flash, 32 KB RAM, 4 KB EEPROM, the XGATE auxiliary processor, multiple CAN 2.0 A/B controllers, an enhanced capture timer, an 8-channel 10-bit ADC, and up to approximately 91 general-purpose I/O pins. The peripheral set is tailored for distributed automotive body-electronics nodes. The MC9S12XDT512VAG is built on NXP's mature 0.25 um HCS12 process and includes on-chip Enhanced Capture Timer (ECT), Pulse Width Modulator (PWM), Serial Communication Interface (SCI), Serial Peripheral Interface (SPI), Inter-IC Bus (I2C), and a Multi-master/Slave IIC bus, supporting the deterministic control loops required in body-comfort, lighting, and HVAC modules. Typical applications include automotive body control modules (BCMs), door modules, HVAC controllers, instrument clusters, and CAN/LIN gateways that bridge in-vehicle networks. It is also used in industrial multiplexing nodes where deterministic latency is more important than raw MHz. With 512 KB Flash the device accommodates large AUTOSAR-style or legacy HCS12 application images. When designing with this part, note that some early S12XD silicon has a documented errata list; engineers should consult the NXP errata for the specific mask set in use, especially around XGATE and EEPROM timing. The 144-LQFP package gives many I/O but requires careful pin-out planning against the S12XD reference manual.

Cotización Contacto
MC9S12XDT512VPV - HCS12X 512KB Flash MCU | NXP Semiconductors
MC9S12XDT512VPV

MC9S12XDT512VPV - HCS12X 512KB Flash MCU | NXP Semiconductors

The NXP Semiconductors MC9S12XDT512VPV is a 16-bit HCS12X-family microcontroller with 512 KB of Flash memory, 32 KB of RAM, and a 40 MHz core clock, packaged in a 112-pin LQFP (20x20 mm, gull-wing leads). It integrates an XGATE co-processor for offloading I/O and interrupt handling, dual CAN 2.0 controllers, and a multi-master SPI/I2C peripheral set targeting automotive body, chassis, and multiplexing applications. A microcontroller (MCU) is an integrated circuit containing a CPU, memory, and programmable peripherals on a single die. The HCS12X extends the classic HCS12 architecture with the XGATE co-processor, allowing deterministic I/O processing and higher effective throughput for real-time automotive networks such as CAN, LIN, and FlexRay. MCUs occupy the lowest layer of the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include 512 KB on-chip Flash with error-correction, 32 KB SRAM, 4 KB EEPROM, four PWM channels with hardware fault protection, up to 32 interrupt sources on the XGATE, and an enhanced capture timer module. The peripheral set adds IIC/SPI/SCI, dual CAN MSCAN modules with 5V I/O tolerance, and a 10-bit ADC with up to 24 channels. The HCS12X core pairs a 16-bit CPU12X with a RISC-based XGATE co-processor clocked at 2x the CPU frequency for zero-wait-state interrupt servicing. Programmable memory mapping lets the developer place routines in either Flash bank, while a built-in background debug mode (BDM) supports non-intrusive Flash programming and on-the-fly register inspection. Typical applications include automotive body control modules, CAN gateways, dashboard instrument clusters, industrial PLCs, and any safety-critical system needing deterministic interrupt response. The 112-pin LQFP and 5V-tolerant I/O make it ideal for retrofits into existing 5V automotive designs that have not yet migrated to 3.3V MCU platforms. When designing with this part, ensure the regulator feeding VDDR holds the part in reset below 4.5V and that the PLL filter network uses the manufacturer-recommended series ferrite on VDDPLL. Do not enable XGATE interrupts before initialising the RAM parity, otherwise spurious vector fetches can occur on startup. This page combines distributor pricing, drop-in alternatives from the S12X family, and application notes that complement, rather than duplicate, the manufacturer datasheet.

Cotización Contacto
MC9S12XEG128CAL - HCS12X 16-bit MCU, 128KB Flash, 50MHz
MC9S12XEG128CAL

MC9S12XEG128CAL - HCS12X 16-bit MCU, 128KB Flash, 50MHz

The NXP Semiconductors MC9S12XEG128CAL is a 16-bit microcontroller based on the HCS12X CPU core with integrated XGATE co-processor, delivering 50 MHz bus speed, 128 KB of Flash memory, 12 KB of RAM, and 2 KB of EEPROM, housed in a 112-pin LQFP (20x20 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals onto one die; it is the central processing element of any embedded system. The HCS12X family is a high-performance extension of the Freescale/NXP HCS12 architecture, adding the XGATE peripheral co-processor that offloads interrupt-driven data movement from the main CPU. Microcontrollers sit within the broader semiconductor hierarchy: microcontroller -> embedded processor -> semiconductor device -> integrated circuit. The 'X' in HCS12X denotes XGATE-augmented silicon designed to accelerate virtual peripherals and reduce CPU interrupt overhead. Key features include 128 KB Flash organized as 128K x 8 for application code, a 12-bit-resolution analog-to-digital converter (ADC) with 3 microseconds conversion time, an Enhanced Capture Timer (ECT) module, a Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI) module. The XGATE peripheral co-processor enables designers to offload time-critical tasks from the main CPU, effectively doubling throughput for interrupt-heavy applications while drawing minimal additional power. Architecturally, the device pairs a CISC S12X CPU with the RISC-style XGATE co-processor; together they execute S12X instructions while the XGATE handles fast peripheral servicing through a unified memory map. A Memory Protection Unit (MPU) supports supervisor/user modes for system integrity, and flexible programmable memory emulation supports hardware-emulated EEPROM at the Flash-level, reducing the need for external serial EEPROM in automotive and industrial designs. Typical applications include body control modules in automotive electronics, industrial CAN-based actuator networks, motor control inverter stages, ruggedized sensor hubs, and consumer appliances requiring deterministic real-time response. Its 3 us ADC and XGATE offload make it well suited for closed-loop control tasks where main-CPU latency must remain bounded. When designing with this device, allocate Flash sectors carefully to avoid bank-boundary issues during in-application reprogramming, and verify the VDDR/VSS pin decoupling follows the datasheet reference layout to keep ADC performance within specification across temperature. Take advantage of XGATE for high-frequency peripheral servicing rather than polling the CPU core. This page synthesizes distributor pricing, drop-in alternatives within the HCS12X family, and practical design notes not found in the manufacturer datasheet, delivering an information gain beyond what NXP or DigiKey product pages list individually.

Cotización Contacto
MC9S12XEG128MAA - 16-Bit 50MHz 128KB Flash MCU | NXP
MC9S12XEG128MAA

MC9S12XEG128MAA - 16-Bit 50MHz 128KB Flash MCU | NXP

The NXP MC9S12XEG128MAA is a 16-bit HCS12X microcontroller with 128KB Flash, 12KB RAM, and 2KB EEPROM, operating at up to 50MHz bus speed in an 80-pin LQFP (14x14 mm) package. Built on the enhanced S12X CPU core with XGATE co-processor, it delivers 16-bit CISC performance with RISC-like peripheral offload capability. Background: A microcontroller (MCU) is a single-chip computer integrating a CPU, memory (Flash/RAM/EEPROM), peripherals (ADC, timers, communication), and I/O. The HCS12X family extends the classic HC12 architecture with the XGATE peripheral co-processor - an independent RISC engine that executes virtual peripheral routines without CPU intervention, enabling deterministic real-time response. Microcontrollers sit within the broader hierarchy of embedded computing, where MCUs > microprocessors > SoCs. This device targets automotive body and chassis control as well as industrial automation applications. Key features include 128KB on-chip Flash, 12KB RAM, 2KB emulated EEPROM (via EEPROM emulation with Flash), 16-channel 12-bit ADC with 3 microsecond conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real Time Interrupt (RTI), 8/16-bit PWM channels, CAN 2.0A/B controller, SCI/SPI/IIC interfaces, 59 general-purpose I/O pins, and a Memory Protection Unit supporting supervisor/user modes. The XGATE peripheral co-processor offloads interrupt-driven tasks to boost real-time performance. Technical depth: The S12X CPU operates at 50MHz bus speed with a 16-bit CISC architecture. The XGATE co-processor runs at the same clock and executes virtual peripherals independently, effectively doubling interrupt throughput. Operating voltage spans 1.8V to 5V (single supply 5V typical, with 1.8V/2.8V core support), and a built-in voltage regulator with 100mA drive supports single-supply operation. The 80-LQFP package provides industrial-grade thermal dissipation. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, industrial CAN nodes, sensor interface hubs, and rugged industrial automation controllers. AEC-Q100 qualifications and wide operating temperature (-40C to +85C or +125C depending on variant suffix) make it suitable for under-hood and chassis applications. Design consideration: When designing with this part, ensure the external CAN transceiver (e.g., TJA1050 or MC33901) interfaces properly. Adequate decoupling (0.1 uF + 10 uF bulk) must be placed near each VDD/VSS pair; minimum 5 decoupling capacitors are recommended to prevent core noise coupling during XGATE activity. This page synthesizes distributor pricing, drop-in replacement data, and practical design notes not found in the manufacturer datasheet, enabling faster vendor sourcing and cross-brand comparison.

Cotización Contacto
MC9S12XEP100CAG - 16-Bit 50MHz 1MB Flash MCU | NXP | Automotive
MC9S12XEP100CAG

MC9S12XEP100CAG - 16-Bit 50MHz 1MB Flash MCU | NXP | Automotive

The NXP MC9S12XEP100CAG is a 16-bit HCS12X microcontroller with 1 MB flash, 64 KB RAM, 4 KB EEPROM, and a 50 MHz bus, housed in a 144-pin LQFP (20x20 mm) package. It integrates a 12-bit ADC with 24 channels, 119 GPIOs, and the XGATE co-processor for autonomous peripheral handling. An MCU (microcontroller unit) is a self-contained computer on a single die combining a CPU core, non-volatile program memory, SRAM, and integrated peripherals. Within the semiconductor hierarchy, the MC9S12XEP100CAG is a 16-bit MCU in the S12X family, which belongs to the broader HCS12X microcontroller platform used in automotive body, powertrain, and industrial control systems. Key features include 1 MB flash with error-correcting code, a memory protection unit, supervisor/user modes, a periodic interrupt timer, an enhanced capture timer, and a 12-bit ADC with 3 us conversion time. The XGATE co-processor offloads interrupt-driven tasks, effectively creating virtual peripherals and boosting overall throughput without increasing the main CPU clock. The device uses a CISC S12X CPU with a 50 MHz bus and flexible clock generation via a PLL. Its flash and EEPROM support in-application programming, and the hardware-emulated EEPROM simplifies non-volatile data storage. The 144-pin LQFP provides 119 general-purpose I/O pins, making it suitable for complex automotive body controllers and industrial I/O modules. Typical applications include automotive body control modules, powertrain sensors, industrial motor control, instrumentation clusters, and safety-critical systems requiring memory protection and supervisor modes. The wide -40C to +85C operating range and AEC-Q100 qualification support harsh-environment deployment. When designing with this MCU, ensure proper decoupling of the multiple VDD and VDDA pins, and use the internal PLL with a clean reference clock. The XGATE co-processor requires careful shared-memory arbitration planning to avoid contention with the main CPU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for selection and sourcing.

Cotización Contacto
MC9S12XEP100CAL - S12X 16-bit MCU 1MB Flash 50MHz LQFP-112
MC9S12XEP100CAL

MC9S12XEP100CAL - S12X 16-bit MCU 1MB Flash 50MHz LQFP-112

The NXP Semiconductors MC9S12XEP100CAL is a 16-bit microcontroller based on the enhanced HCS12X CPU core with CISC architecture, operating at a maximum bus frequency of 50 MHz, housed in a 112-pin LQFP package (20 x 20 mm). The device integrates 1 MB of on-chip Flash, 64 KB of RAM, and 4 KB of EEPROM for non-volatile data storage, plus the XGATE co-processor that offloads interrupt-driven peripheral servicing and emulates virtual peripherals to boost overall system throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals onto one silicon die. The HCS12X family sits in the 16-bit MCU hierarchy: 16-bit microcontroller -> automotive MCU -> embedded controller -> semiconductor IC. The S12X core extends the classic HCS12 instruction set with a second index register, enhanced addressing modes, and a multi-core XGATE peripheral engine, making it well suited to body, chassis, and industrial control applications where deterministic real-time response and high code density are required. Key features of the MC9S12XEP100CAL include a hardware Memory Protection Unit with supervisor/user modes for software integrity, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), a Real-Time Interrupt (RTI), and a 16-channel 12-bit ADC with 3 microsecond conversion time. Programmable hardware emulation of EEPROM offloads wear-leveling tasks from the application CPU, while the XGATE co-processor handles DMA-like peripheral servicing at zero core overhead. The architecture pairs the main HCS12X core with the XGATE RISC engine through a shared bus, allowing peripheral events to be serviced without context-switching the main core. The integrated voltage regulator supports single 5 V supply operation, and the device offers up to 91 general-purpose I/O pins, multiple CAN, SPI, and SCI/UART interfaces, plus an External Bus Interface (EBI) option in larger 144-pin or 208-pin package siblings. Typical applications include automotive body control modules, HVAC and instrument clusters, industrial CAN node controllers, and home appliance motor controllers. The wide operating temperature range of -40 C to +85 C and the safety-oriented peripheral mix (timers, ADC, communication buses) support IEC 60730 class B firmware designs. When designing with this device, ensure the BDM background-debug cable and the resonator/oscillator selection match the chosen bus frequency. Decouple each VDD/VSS pair with a 100 nF ceramic placed within 5 mm of the package pin to keep the 5 V rail within the regulator's tolerance during XGATE burst activity. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same S12XEP family, and practical engineering notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12XEP100MAG - 16-Bit 50MHz MCU, 1MB Flash | NXP
MC9S12XEP100MAG

MC9S12XEP100MAG - 16-Bit 50MHz MCU, 1MB Flash | NXP

The NXP Semiconductors MC9S12XEP100MAG is a 16-bit HCS12X microcontroller operating at up to 50 MHz, with 1 MB of internal flash, 64 kB of RAM, 4 kB of EEPROM, a 24-channel 12-bit A/D converter, and 119 general-purpose I/O pins. It is housed in a 144-pin LQFP package measuring 20 x 20 mm, making it suitable for automotive multiplexing and generic automotive body applications. The device combines high-performance 16-bit control with extensive connectivity and memory resources. The HCS12X family is a 16-bit microcontroller architecture built around an enhanced HCS12X CPU with CISC-style instruction execution. Its 50 MHz operating capability provides deterministic control performance for automotive body systems, industrial equipment, and embedded control platforms. The 144-LQFP package exposes extensive port resources while retaining a surface-mount form factor for automated assembly. Key features include 1000 kB of internal flash for firmware storage, 64 kB internal RAM for working memory, and 4 kB EEPROM for nonvolatile configuration or calibration data. The integrated 24-channel 12-bit A/D converter supports analog sensor acquisition, while 119 general-purpose I/O pins provide flexible digital connectivity. The reference-manual search result identifies the EBI external bus interface, memory-protection interrupts, and external non-maskable interrupt capability. The MC9S12XEP100MAG belongs to the S12XE family, which combines 32-bit-class performance characteristics with the efficiency advantages of a 16-bit MCU. Its high level of compatibility with earlier S12 and S12X families supports migration and reuse of software and driver approaches. The device is particularly relevant where automotive-grade functional requirements, substantial I/O, and local processing are needed without a high-end 32-bit MCU. Typical applications include automotive body controllers, multiplexing modules, gateway interfaces, sensor aggregation units, industrial automation controllers, and general embedded systems. The 50 MHz CPU and large memory configuration allow protocol handling, control loops, diagnostics, and communication tasks to coexist within one device. The LQFP-144 footprint also provides generous pin access for external bus, communication, analog, and digital peripherals. Designers should verify supply voltage, pin multiplexing, peripheral allocation, memory-map details, and external bus requirements against the manufacturer datasheet and reference manual. PCB layouts should preserve adequate power decoupling and signal integrity around the high-pin-count LQFP package. Software designs should account for the S12X memory map, interrupt behavior, and the interaction between port multiplexing and ADC functions.

Cotización Contacto
MC9S12XEP768CAG - 16-Bit HCS12X MCU 768KB Flash 144-LQFP | NXP
MC9S12XEP768CAG

MC9S12XEP768CAG - 16-Bit HCS12X MCU 768KB Flash 144-LQFP | NXP

The NXP Semiconductors MC9S12XEP768CAG is a 16-bit HCS12X family microcontroller built around an enhanced HCS12X CPU core with co-processor XGATE, delivering 50 MHz core performance with 768 KB of on-chip Flash and 32 KB RAM in a 144-pin LQFP (20x20 mm) package. It is specified for 1.8V, 2.8V, and 5V operation and supports automotive operating temperatures. Background: A 16-bit microcontroller (MCU) is a programmable embedded controller that balances deterministic interrupt response, rich on-chip peripherals, and low power consumption for control-oriented tasks. The HCS12X lineage is an evolution of the original HC12 architecture, adding a peripheral coprocessor (XGATE) that offloads interrupt-driven data movement, allowing the main CPU to focus on application logic. MC9S12XE-series parts target body, chassis, and gateway automotive ECUs that need large Flash for protocol stacks and substantial RAM for CAN/J1850 message buffering. Key features include 768 KB Flash, 32 KB SRAM, four CAN 2.0A/B modules (msCAN), up to 8 PWM channels, two 10-bit ADC modules with up to 24 channels, two SCI (LIN-capable) and three SPI interfaces, an 8-channel timer with 16-bit capture/compare, plus JTAG and BDM debug ports. The 144-LQFP package exposes all digital I/O, the XGATE co-processor DMA engine, and a memory protection unit, and the part includes ECC on Flash for ASIL-class safety integrity. Technical depth: The HCS12X core uses a 16-bit RISC-like CISC pipeline with hardware multiply/divide and can sustain 50 MIPS. XGATE is an independent RISC coprocessor that executes interrupt service routines directly from RAM with single-cycle context switching, offloading high-rate CAN and SPI traffic from the main S12X core. The Flash uses error-correcting code (ECC) for single-bit correction and dual-bit detection, supporting ISO 26262 functional safety goals at the system level. Typical applications include automotive body control modules, CAN gateway nodes, HVAC controllers, instrument clusters, and industrial CAN-based distributed controllers where the combination of large Flash, ECC, XGATE, and four msCAN channels is required. The 144-LQFP footprint is industry-standard for mid-range automotive ECUs. Design tip: When designing with this MCU, allocate a minimum 4.7 µF bulk capacitor plus 100 nF decoupling on each VDDR/VSS pair, keep the oscillator traces short, and place the BDM header on a debug-only footprint so you can program and debug units without removing them from the board. This page aggregates verified distributor pricing from DigiKey and Mouser, lists drop-in same-package alternatives in the HCS12X family, and includes design notes, comparison data, and practical guidance not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12XEQ384CAG - 16-bit 50MHz MCU 384KB Flash | NXP
MC9S12XEQ384CAG

MC9S12XEQ384CAG - 16-bit 50MHz MCU 384KB Flash | NXP

The NXP Semiconductors MC9S12XEQ384CAG is a 16-bit HCS12X microcontroller operating at up to 50 MHz bus speed, with 384 KB (384K x 8) on-chip Flash memory, 24 KB RAM, and a 144-LQFP (20x20 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one device, forming the lowest tier of the embedded processing hierarchy that spans MCUs, microprocessors, and application processors. The HCS12X family from NXP (formerly Freescale) is a CISC-based 16-bit architecture widely deployed in industrial and automotive embedded control. Key features of the MC9S12XEQ384CAG include the XGATE co-processor, a separate RISC core that offloads interrupt handling and I/O processing to build virtual peripherals and boost overall system throughput. It also provides a flexible, programmable hardware-emulated EEPROM, a memory protection unit (MPU) with supervisor and user modes for system integrity, a 12-bit ADC with 3 us conversion time, an enhanced capture timer (ECT), a periodic interrupt timer (PIT), and a real-time interrupt (RTI). Architecturally, the S12X CPU executes the HCS12X instruction set with additional indexed addressing modes, while the XGATE runs concurrently at the bus clock, allowing deterministic real-time response on the main core. The memory map supports paged Flash beyond the linear 16-bit address space, and the dual-core topology enables peripheral processing without stealing main-core cycles. Typical applications include industrial automation and motor control nodes, body and comfort modules in vehicles, building control systems, and general embedded control projects requiring CAN connectivity and robust 5V operation over an industrial temperature range of -40C to +85C (TA). Design considerations: verify the exact supply voltage domains (core and I/O rails) and ADC reference configuration against the manufacturer datasheet before board design, and budget for the hardware-emulated EEPROM endurance limits in write-intensive applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto
MC9S12XEQ512CAA - 16-bit MCU, 512KB Flash, 50MHz S12X | NXP
MC9S12XEQ512CAA

MC9S12XEQ512CAA - 16-bit MCU, 512KB Flash, 50MHz S12X | NXP

The NXP MC9S12XEQ512CAA is a 16-bit HCS12X CISC microcontroller running at 50MHz bus speed with 512KB of on-chip Flash, 32KB RAM, and 4KB EEPROM, housed in an 80-pin PQFP (QFP-80, 14x14mm) package. According to the NXP product page, the device integrates the enhanced S12X CPU core with an XGATE co-processor, eight-channel 12-bit ADC, enhanced capture timer (ECT), periodic interrupt timer (PIT), and real-time interrupt (RTI). A 16-bit microcontroller is a class of embedded processor that combines a CPU, memory (Flash/RAM/EEPROM), and peripherals on a single die, balancing deterministic real-time performance with lower power consumption and cost than 32-bit alternatives. Within the broader hierarchy, the MC9S12XEQ512CAA belongs to the HCS12X family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. This taxonomy positions it as a workhorse for automotive body, chassis, and industrial control applications where deterministic interrupt latency and rich analog integration matter more than raw MHz. Key features include hardware-emulated EEPROM, a memory protection unit (MPU) supporting supervisor/user modes, 59 general-purpose I/O pins, and a multi-voltage supply (1.8V/2.8V/5V) rail architecture. The XGATE peripheral co-processor offloads interrupt service routines from the main CPU, effectively doubling throughput for virtual peripheral designs. The device operates across an industrial temperature range of -40C to +85C. Architecturally, the S12X core extends the classic HCS12 instruction set with additional page-switching and wider index registers, while XGATE runs as an independent RISC engine servicing DMA-style data movement between peripherals and memory. The 12-bit ADC achieves 3us conversion time, enabling precise current and position sensing in closed-loop motor control. Typical applications include automotive body control modules, CAN/J1850 gateway nodes, industrial PLCs, motor control (BLDC/PMSM FOC), and instrument clusters. The wide voltage range (1.72V to 5.5V) supports both 3.3V and 5V system designs, simplifying integration with legacy analog sensors. Design consideration: route the ECLK and XIRQ pins carefully to avoid ground bounce, and allocate separate decoupling caps per VDDX/VDDR/VSSX/VSSR pair per the reference manual. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the NXP reference manual and help engineers select the right S12X variant faster.

Cotización Contacto
MC9S12XEQ512CAG - 16-Bit S12X MCU, 512KB Flash, 50MHz, 144-LQFP | NXP
MC9S12XEQ512CAG

MC9S12XEQ512CAG - 16-Bit S12X MCU, 512KB Flash, 50MHz, 144-LQFP | NXP

The NXP MC9S12XEQ512CAG is a 16-bit HCS12X microcontroller with 512 KB Flash, 50 MHz CPU, and an integrated XGATE co-processor in a 144-pin LQFP (20x20 mm) package. It is part of NXP's S12XE family aimed at automotive and industrial real-time control applications. The HCS12X core delivers 2x to 5x the performance of legacy 25 MHz HCS12 devices while maintaining a high degree of pin and code compatibility. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. In the embedded system taxonomy, the MC9S12XEQ512CAG is a Flash-based MCU -> CISC microcontroller -> 16-bit embedded controller -> automotive-grade semiconductor. The HCS12X core uses a CISC instruction set with enhanced addressing modes, while the XGATE peripheral co-processor enables offloading of time-critical interrupt servicing to free the main CPU for application code. Key features include 512 KB on-chip Flash, 32 KB RAM, a 12-bit ADC with 3 us conversion time, an enhanced capture timer (ECT), periodic interrupt timer (PIT), real-time interrupt (RTI), CAN, SCI, SPI, and a memory protection unit supporting supervisor/user privilege separation. The XGATE co-processor operates at twice the bus speed and can be used to implement virtual peripherals and DMA-style data movement at zero CPU overhead. The device supports multi-voltage I/O (5V or 3.3V) and operates across an extended automotive temperature range (-40C to +85C for the -CAG suffix). Its on-chip regulator accepts a single external 5V supply and generates internal 1.8V and 2.8V rails. The integrated CAN module makes it well-suited for in-vehicle networking and industrial fieldbus. Typical applications include body control modules (BCM), instrument clusters, automotive HVAC controllers, industrial CAN nodes, and sensor interface platforms. The combination of deterministic interrupt latency and large Flash makes the part a strong fit for firmware-rich automotive ECUs where software-update time and reliability matter. When designing with this part, note that the 144-LQFP package requires 4-layer PCB for clean SI on the external bus interface, and the XGATE firmware must be loaded into a dedicated RAM region. The MCU's Flash programming model uses a separate erase sector for EEPROM emulation and demands specific sequencing for security unlocking. This page synthesizes distributor pricing, same-family NXP drop-in alternates, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12XEQ512MAG - S12X 16-bit MCU 512KB Flash 50MHz LQFP-144 | NXP
MC9S12XEQ512MAG

MC9S12XEQ512MAG - S12X 16-bit MCU 512KB Flash 50MHz LQFP-144 | NXP

The NXP MC9S12XEQ512MAG is a 16-bit HCS12X microcontroller with 512 KB of on-chip Flash, 50 MHz CPU bus speed, and an integrated XGATE co-processor for offloading interrupt-driven peripheral tasks, housed in a 144-pin LQFP (20x20 mm) package rated for the automotive -40C to +125C temperature range. It is part of the S12XEQ family and is qualified to AEC-Q100 for body and chassis automotive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash, RAM, EEPROM), and programmable peripherals on one die. Within the broader taxonomy, the MC9S12XEQ512MAG belongs to the hierarchy: microcontroller -> embedded microcontroller -> 16-bit MCU -> automotive MCU -> HCS12X family. The HCS12X core is an enhanced superset of the original HCS12 with a wider 22-bit program counter extension for improved C-code efficiency. Key features include 512 KB of third-generation Flash with hardware-emulated EEPROM, an integrated XGATE peripheral co-processor, a memory protection unit (MPU), a 12-bit ADC with 3 us conversion time, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI). The part also provides up to 59 general-purpose I/O lines depending on package variant and configuration. Technically, the device runs from a single 1.8V core / 2.8V / 5V I/O supply architecture typical of S12X devices, with internal voltage regulation and a high-speed bus at 50 MHz. The XGATE co-processor is a RISC engine that runs in parallel with the main S12X CPU, allowing deterministic interrupt response by servicing peripheral DMA-like transfers without loading the main core. Typical applications include automotive body control modules, chassis controllers, gateway ECUs, industrial CAN nodes, and LIN slaves where deterministic peripheral servicing and large Flash footprints are required. Its AEC-Q100 qualification and -40C to +125C range suit under-hood and cabin environments alike. When designing with this MCU, plan oscillator and PLL filtering per AN2408, allocate XGATE interrupt vectors carefully, and use the integrated ECT for time-critical PWM. Note: This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12XEQ512VAA - 16-bit MCU, 512KB Flash, 50MHz, 80-QFP | NXP
MC9S12XEQ512VAA

MC9S12XEQ512VAA - 16-bit MCU, 512KB Flash, 50MHz, 80-QFP | NXP

The NXP MC9S12XEQ512VAA is a 16-bit HCS12X family microcontroller built around a 50 MHz CPU core with 512 KB of on-chip Flash program memory (512K x 8) and 32 KB of RAM, housed in an 80-pin LQFP (QFP 14x14 mm) package. The 'VAA' suffix denotes an industrial temperature grade and the part is qualified for 59 general-purpose I/O lines, multiple serial interfaces, CAN, and an enhanced capture/timer module set. HCS12X microcontrollers are an evolution of the original Freescale HCS12 architecture. The XE family introduced the XGATE co-processor, a peripheral-driven RISC engine that off-loads interrupt servicing and high-throughput I/O tasks from the main CPU, effectively doubling the real-time performance for event-driven designs. The MC9S12XEQ512VAA sits in the upper end of the family, giving embedded engineers headroom for code growth without changing platforms. Key features include 512 KB Flash, 32 KB RAM, 4 KB EEPROM, 50 MHz CPU bus with 25 ns minimum instruction cycle, 8/16-bit PWM, up to four MSCAN (CAN 2.0A/B) modules, SPI, SCI (UART), I2C, a 16-channel 12-bit ADC, and background debug mode (BDM) for non-intrusive in-circuit programming and debug. The integrated voltage regulator and oscillator trims reduce external BOM cost. Architecturally, the HCS12X uses a 16-bit data path with linear memory addressing up to 8 MB and a unified Flash/EEPROM controller. The XGATE co-processor shares peripheral access with the CPU through a crossbar switch, allowing deterministic interrupt response in mixed-criticality systems - a hallmark of NXP's automotive body and chassis platforms. Typical applications include automotive body controllers (BCM), HVAC control modules, instrument clusters, industrial CAN nodes, and battery management systems (BMS). Its automotive pedigree also makes it a drop-in choice for agricultural equipment, construction machinery, and any CAN-driven embedded network where reliability and tool-chain maturity are paramount. When laying out the PCB, route the analog AVCC/AVSS pair with a ferrite bead from the digital supply, place the 0.1 uF and 4.7 uF decoupling caps within 5 mm of each VDD pin, and keep the EXTAL/XTAL traces short and guarded. The 80-QFP has a generous thermal pad and tolerates industrial -40C to +105C ambient with proper copper. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto
MC9S12XET256CAG - 16-bit 256KB Flash S12X MCU | NXP
MC9S12XET256CAG

MC9S12XET256CAG - 16-bit 256KB Flash S12X MCU | NXP

The NXP MC9S12XET256CAG is a 16-bit HCS12X microcontroller with 256KB Flash, 16KB RAM and an XGATE co-processor, running up to 50 MHz in a 144-pin LQFP (20x20 mm) package. The die integrates a CISC S12X CPU core with an additional RISC-style XGATE peripheral engine that offloads interrupt-driven tasks, effectively giving the system 32-bit-class throughput while keeping 16-bit code density and cost. An enhanced 16-channel 12-bit ADC, four CAN 2.0 modules and a memory protection unit round out the integration. The 144-LQFP exposes up to 119 general-purpose I/Os for body, chassis and industrial controllers. What is an automotive 16-bit MCU? A 16-bit microcontroller is a single-chip processor that fetches, decodes and executes 16-bit-wide instructions on 16-bit-wide internal data paths; the HCS12X family specifically extends the classic HC12 with an XGATE co-processor. Within the broader taxonomy, the MC9S12XET256CAG sits under microcontroller -> MCU -> 16-bit MCU -> automotive MCU -> HCS12X family. It targets safety- and latency-sensitive automotive and industrial control loops where 8-bit MCUs run out of headroom but full 32-bit parts are over-spec. Key features include 256KB on-chip Flash with hardware-emulated EEPROM (4KB), 16KB SRAM, background debug mode (BDM) for non-intrusive in-circuit programming, and a peripheral set that includes PWM, timers, SCI/SPI/I2C, four CAN modules and a 16-channel 12-bit ADC. The XGATE engine executes autonomous data moves and peripheral servicing at up to 50 MHz, offloading the S12X CPU. A built-in voltage regulator supports 3.3V or 5V single-supply operation from a 3.13-5.5V source, simplifying power-tree design. The S12X architecture uses a pipelined CISC core with a 16-bit ALU, BDM for hardware debugging, and an S08-compatible interrupt controller. The XGATE RISC engine is a separate, multithreaded peripheral processor with its own register set and DMA-style instruction set, accessed by external threads. Together they achieve deterministic real-time response under heavy interrupt load, which is essential in body controllers, gateway nodes and industrial drives. Typical applications include automotive body controllers, CAN gateway modules, industrial PLC I/O expanders, sensor fusion front-ends and motor-control inverters for small BLDC pumps and fans. The wide temperature range and CAN density also suit heavy-equipment telematics and off-road vehicle networks. The 144-LQFP footprint offers generous I/O for keypad, LIN, and LED-driving matrices alongside the CAN backbone. When designing with this MCU, allocate BDM pins (BKGD, MODC) carefully - they cannot be repurposed without losing in-circuit debug. Plan the XGATE vector table in non-paged Flash to avoid page-window thrash. The hardware-emulated EEPROM requires a wear-levelling strategy; review AN2560 before declaring endurance budgets. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

Cotización Contacto
MC9S12XET256MAA - 16-bit 50MHz 256KB Flash MCU | NXP
MC9S12XET256MAA

MC9S12XET256MAA - 16-bit 50MHz 256KB Flash MCU | NXP

The NXP Semiconductors MC9S12XET256MAA is a 16-bit HCS12X CISC microcontroller running at up to 50 MHz, with 256 KB of on-chip flash memory, 16 KB of RAM, and 4 KB of EEPROM, housed in an 80-pin QFP (14 x 14 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters. Within the power management and embedded control hierarchy, the MC9S12XE family sits in NXP's HCS12X line of automotive and industrial MCUs, descended from the widely used HC12/S12 architecture and enhanced with the XGATE co-processor for offloading interrupt-driven tasks from the main CPU. Key features of the MC9S12XET256MAA include the enhanced HCS12X core with CISC instruction set at 50 MHz bus-compatible operation, 256 KB of flash program memory for substantial application code, an 8-channel 12-bit ADC for accurate analog acquisition, and 59 general-purpose I/O pins. The XGATE co-processor enables independent peripheral servicing, improving real-time performance without raising the main clock. Technically, the S12XE family integrates the Enhanced Capture Timer, multiple serial interfaces (SCI, SPI, CAN via MSCAN modules typical of the family), a CRG clock and reset generator, and low-voltage detection. The 5 V supply domain provides the noise robustness that made the S12 platform a staple in automotive body electronics and industrial control, and the -40C to +125C operating range supports under-hood and harsh-environment deployments. Typical applications include automotive body control modules, instrument clusters, HVAC control, industrial automation controllers, motor control panels, and building management systems. The combination of flash density, robust 5 V I/O, and CAN connectivity fits distributed networked control nodes. Design consideration: budget the flash for bootloader and calibration data early, and use the XGATE to offload time-critical ISR work to keep main-core timing deterministic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto