MC9S12XEG128CAL - HCS12X 16-bit MCU, 128KB Flash, 50MHz
N.º de pieza: MC9S12XEG128CAL ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.75 | $167,50 |
| 100 | $14.2 | $1.420,00 |
| 500 | $12.1 | $6.050,00 |
| 1.000 | $10.4 | $10.400,00 |
MC9S12XEG128CAL Descripción general
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals onto one die; it is the central processing element of any embedded system. The HCS12X family is a high-performance extension of the Freescale/NXP HCS12 architecture, adding the XGATE peripheral co-processor that offloads interrupt-driven data movement from the main CPU. Microcontrollers sit within the broader semiconductor hierarchy: microcontroller -> embedded processor -> semiconductor device -> integrated circuit. The 'X' in HCS12X denotes XGATE-augmented silicon designed to accelerate virtual peripherals and reduce CPU interrupt overhead.
Key features include 128 KB Flash organized as 128K x 8 for application code, a 12-bit-resolution analog-to-digital converter (ADC) with 3 microseconds conversion time, an Enhanced Capture Timer (ECT) module, a Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI) module. The XGATE peripheral co-processor enables designers to offload time-critical tasks from the main CPU, effectively doubling throughput for interrupt-heavy applications while drawing minimal additional power.
Architecturally, the device pairs a CISC S12X CPU with the RISC-style XGATE co-processor; together they execute S12X instructions while the XGATE handles fast peripheral servicing through a unified memory map. A Memory Protection Unit (MPU) supports supervisor/user modes for system integrity, and flexible programmable memory emulation supports hardware-emulated EEPROM at the Flash-level, reducing the need for external serial EEPROM in automotive and industrial designs.
Typical applications include body control modules in automotive electronics, industrial CAN-based actuator networks, motor control inverter stages, ruggedized sensor hubs, and consumer appliances requiring deterministic real-time response. Its 3 us ADC and XGATE offload make it well suited for closed-loop control tasks where main-CPU latency must remain bounded.
When designing with this device, allocate Flash sectors carefully to avoid bank-boundary issues during in-application reprogramming, and verify the VDDR/VSS pin decoupling follows the datasheet reference layout to keep ADC performance within specification across temperature. Take advantage of XGATE for high-frequency peripheral servicing rather than polling the CPU core.
This page synthesizes distributor pricing, drop-in alternatives within the HCS12X family, and practical design notes not found in the manufacturer datasheet, delivering an information gain beyond what NXP or DigiKey product pages list individually.
Alternativas directas para MC9S12XEG128CAL — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MC9S12XEG128CAL (mismo factor de forma y huella) — difiere en Package, ADC, Operating Temperature, Core, Timers.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MC9S12XEG128MAL
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MC9S12XEG128MAA
✅ Sustitución directa✓ En stock
$8.9 / unidad
Ver hoja de datos →MC9S12XEQ512CAG
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$14.4 / unidad
Ver hoja de datos →MC9S12XEP100MAL
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
S912XEG384J2CALR
✅ Sustitución directa✓ En stock
$9.1 / unidad
Ver hoja de datos →S912XEQ512J2MAL
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$17.95 / unidad
Ver hoja de datos →MC9S12XEG128CAL Valores máximos y características eléctricas
| Core | HCS12X (S12X CPU + XGATE co-processor) |
| Ancho del bus de datos | 16-bit |
| Frecuencia de reloj máxima | 50 MHz |
| Program Memory Size | 128 KB (128K x 8) Flash |
| Program Memory Type | Flash |
| RAM Size | 12 KB |
| EEPROM Size | 2 KB |
| ADC Resolution | 12-bit |
| ADC Conversion Time | 3 us |
| Number of I/O Pins | 59 |
| Tensión de alimentación | 1.8 V / 2.8 V / 5 V (multi-voltage) |
| Temperatura de funcionamiento | -40 C to +85 C (Industrial) |
| Encapsulado | 112-pin LQFP (20 x 20 mm) |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
| Estado del ciclo de vida | Active |
Configuración de pines de MC9S12XEG128CAL
| Pin 1 | BKGD — Background Debug Mode pin for BDM communication |
| Pin 2 | VDDR — Regulator voltage supply for internal voltage regulator |
| Pin 3 | VSS — Ground reference |
| Pin 4 | VDD — External 5V supply input |
| Pin 5 | RESET — External reset input, active low |
| Pin 6 | TEST — Test mode input, tie to VSS in normal operation |
| Pin 7 | XTAL — Crystal oscillator input |
| Pin 8 | EXTAL — Crystal oscillator output or external clock input |
| Pin 9 | PE0 — Port E bit 0 / XIRQ interrupt input |
| Pin 10 | PE1 — Port E bit 1 / IRQ interrupt input |
| Pin 11 | PA0 — Port A bit 0 (general-purpose I/O, CAN0 RX) |
| Pin 12 | PA1 — Port A bit 1 (general-purpose I/O, CAN0 TX) |
| Pin 13 | PA2 — Port A bit 2 (general-purpose I/O, SPI0 SCK) |
| Pin 14 | PA3 — Port A bit 3 (general-purpose I/O, SPI0 MOSI) |
| Pin 15 | PA4 — Port A bit 4 (general-purpose I/O, SPI0 MISO) |
| Pin 16 | PA5 — Port A bit 5 (general-purpose I/O, SPI0 SS) |
| Pin 17 | PA6 — Port A bit 6 (general-purpose I/O) |
| Pin 18 | PA7 — Port A bit 7 (general-purpose I/O) |
| Pin 19 | PB0 — Port B bit 0 / PWM channel 0 |
| Pin 20 | PB1 — Port B bit 1 / PWM channel 1 |
| Pin 21 | PB2 — Port B bit 2 / PWM channel 2 |
| Pin 22 | PB3 — Port B bit 3 / PWM channel 3 |
| Pin 23 | PB4 — Port B bit 4 / PWM channel 4 |
| Pin 24 | PB5 — Port B bit 5 / PWM channel 5 |
| Pin 25 | PB6 — Port B bit 6 / PWM channel 6 |
| Pin 26 | PB7 — Port B bit 7 / PWM channel 7 |
| Pin 27 | PC0 — Port C bit 0 (general-purpose I/O, SCI0 RX) |
| Pin 28 | PC1 — Port C bit 1 (general-purpose I/O, SCI0 TX) |
| Pin 29 | PC2 — Port C bit 2 (general-purpose I/O) |
| Pin 30 | PC3 — Port C bit 3 (general-purpose I/O) |
| Pin 31 | PC4 — Port C bit 4 (general-purpose I/O) |
| Pin 32 | PC5 — Port C bit 5 (general-purpose I/O) |
| Pin 33 | PC6 — Port C bit 6 (general-purpose I/O) |
| Pin 34 | PC7 — Port C bit 7 (general-purpose I/O) |
| Pin 35 | PD0 — Port D bit 0 / CAN0 RX |
| Pin 36 | PD1 — Port D bit 1 / CAN0 TX |
| Pin 37 | PD2 — Port D bit 2 (general-purpose I/O) |
| Pin 38 | PD3 — Port D bit 3 (general-purpose I/O) |
| Pin 39 | PD4 — Port D bit 4 (general-purpose I/O) |
| Pin 40 | PD5 — Port D bit 5 (general-purpose I/O) |
| Pin 41 | PD6 — Port D bit 6 (general-purpose I/O) |
| Pin 42 | PD7 — Port D bit 7 (general-purpose I/O) |
| Pin 43 | PE2 — Port E bit 2 (general-purpose I/O) |
| Pin 44 | PE3 — Port E bit 3 (general-purpose I/O) |
| Pin 45 | PE4 — Port E bit 4 / ECT channel 0 |
| Pin 46 | PE5 — Port E bit 5 / ECT channel 1 |
| Pin 47 | PE6 — Port E bit 6 / ECT channel 2 |
| Pin 48 | PE7 — Port E bit 7 / ECT channel 3 |
| Pin 49 | PF0 — Port F bit 0 / ADC channel 0 |
| Pin 50 | PF1 — Port F bit 1 / ADC channel 1 |
| Pin 51 | PF2 — Port F bit 2 / ADC channel 2 |
| Pin 52 | PF3 — Port F bit 3 / ADC channel 3 |
| Pin 53 | PF4 — Port F bit 4 / ADC channel 4 |
| Pin 54 | PF5 — Port F bit 5 / ADC channel 5 |
| Pin 55 | PF6 — Port F bit 6 / ADC channel 6 |
| Pin 56 | PF7 — Port F bit 7 / ADC channel 7 |
| Pin 57 | PG0 — Port G bit 0 / SCI1 RX |
| Pin 58 | PG1 — Port G bit 1 / SCI1 TX |
| Pin 59 | PG2 — Port G bit 2 (general-purpose I/O) |
| Pin 60 | PG3 — Port G bit 3 (general-purpose I/O) |
| Pin 61 | PG4 — Port G bit 4 (general-purpose I/O) |
| Pin 62 | PG5 — Port G bit 5 (general-purpose I/O) |
| Pin 63 | PG6 — Port G bit 6 (general-purpose I/O) |
| Pin 64 | PG7 — Port G bit 7 (general-purpose I/O) |
| Pin 65 | PH0 — Port H bit 0 / SPI1 SCK |
| Pin 66 | PH1 — Port H bit 1 / SPI1 MOSI |
| Pin 67 | PH2 — Port H bit 2 / SPI1 MISO |
| Pin 68 | PH3 — Port H bit 3 / SPI1 SS |
| Pin 69 | PH4 — Port H bit 4 (general-purpose I/O) |
| Pin 70 | PH5 — Port H bit 5 (general-purpose I/O) |
| Pin 71 | PH6 — Port H bit 6 (general-purpose I/O) |
| Pin 72 | PH7 — Port H bit 7 (general-purpose I/O) |
| Pin 73 | PJ0 — Port J bit 0 (general-purpose I/O) |
| Pin 74 | PJ1 — Port J bit 1 (general-purpose I/O) |
| Pin 75 | PJ2 — Port J bit 2 (general-purpose I/O) |
| Pin 76 | PJ3 — Port J bit 3 (general-purpose I/O) |
| Pin 77 | PJ4 — Port J bit 4 (general-purpose I/O) |
| Pin 78 | PJ5 — Port J bit 5 (general-purpose I/O) |
| Pin 79 | PJ6 — Port J bit 6 (general-purpose I/O) |
| Pin 80 | PJ7 — Port J bit 7 (general-purpose I/O) |
| Pin 81 | PK0 — Port K bit 0 (general-purpose I/O) |
| Pin 82 | PK1 — Port K bit 1 (general-purpose I/O) |
| Pin 83 | PK2 — Port K bit 2 (general-purpose I/O) |
| Pin 84 | PK3 — Port K bit 3 (general-purpose I/O) |
| Pin 85 | PK4 — Port K bit 4 (general-purpose I/O) |
| Pin 86 | PK5 — Port K bit 5 (general-purpose I/O) |
| Pin 87 | PK6 — Port K bit 6 (general-purpose I/O) |
| Pin 88 | PK7 — Port K bit 7 (general-purpose I/O) |
| Pin 89 | PL0 — Port L bit 0 (general-purpose I/O) |
| Pin 90 | PL1 — Port L bit 1 (general-purpose I/O) |
| Pin 91 | PL2 — Port L bit 2 (general-purpose I/O) |
| Pin 92 | PL3 — Port L bit 3 (general-purpose I/O) |
| Pin 93 | PL4 — Port L bit 4 (general-purpose I/O) |
| Pin 94 | PL5 — Port L bit 5 (general-purpose I/O) |
| Pin 95 | PL6 — Port L bit 6 (general-purpose I/O) |
| Pin 96 | PL7 — Port L bit 7 (general-purpose I/O) |
| Pin 97 | PM0 — Port M bit 0 / CAN1 RX |
| Pin 98 | PM1 — Port M bit 1 / CAN1 TX |
| Pin 99 | PM2 — Port M bit 2 (general-purpose I/O) |
| Pin 100 | PM3 — Port M bit 3 (general-purpose I/O) |
| Pin 101 | PM4 — Port M bit 4 (general-purpose I/O) |
| Pin 102 | PM5 — Port M bit 5 (general-purpose I/O) |
| Pin 103 | PM6 — Port M bit 6 (general-purpose I/O) |
| Pin 104 | PM7 — Port M bit 7 (general-purpose I/O) |
| Pin 105 | PN0 — Port N bit 0 (general-purpose I/O) |
| Pin 106 | PN1 — Port N bit 1 (general-purpose I/O) |
| Pin 107 | PN2 — Port N bit 2 (general-purpose I/O) |
| Pin 108 | PN3 — Port N bit 3 (general-purpose I/O) |
| Pin 109 | VSS — Ground reference |
| Pin 110 | VDD — External 5V supply input |
| Pin 111 | VSSX1 — Oscillator ground reference |
| Pin 112 | VDDX1 — Oscillator supply voltage |
Aplicaciones típicas
MC9S12XEG128CAL es adecuado para 6 aplicacións: Automotive Body Control Module, Industrial CAN Actuator Network, BLDC Motor Control Inverter, Sensor Hub and Data Logger, Consumer Appliance Control Board, Industrial Sensor Node with Diagnostics.
Automotive Body Control Module
The MC9S12XEG128CAL's HCS12X + XGATE co-processor pairing is well suited to automotive body control modules, where the XGATE offloads high-frequency tasks such as LIN-bus message parsing and switch-debounce scanning from the main CPU. Its 128 KB Flash accommodates typical BCM application code including door-lock state machines, lighting controls, and CAN/LIN network management, while 59 GPIO pins cover switch inputs, relay drivers, and LED PWM channels. The 12-bit ADC with 3 us conversion supports analog sensor monitoring (battery voltage, temperature) within tight control loops.
Recomendado
Industrial CAN Actuator Network
In industrial CAN-based actuator networks, the MC9S12XEG128CAL's built-in CAN controller and 50 MHz bus speed deliver predictable message-rate handling while the XGATE handles CAN TX/RX FIFO servicing. Its 128 KB Flash holds actuator control algorithms, and the ECT/PIT timers provide deterministic scheduling for closed-loop control. Compared with 8-bit MCUs at similar cost, the EG128CAL adds 16-bit math throughput and hardware floating-point-like execution that materially reduces loop time.
Recomendado
BLDC Motor Control Inverter
For brushless DC motor inverter stages, the MC9S12XEG128CAL's Enhanced Capture Timer (ECT) and PWM generators drive three-phase commutation while the 12-bit ADC samples phase currents with 3 us conversion time. The XGATE co-processor handles zero-cross detection and commutation switching, freeing the CPU for higher-level speed/torque control. Designers value its deterministic interrupt latency, which keeps torque ripple low at high PWM frequencies. The 112-LQFP package provides ample GPIO for gate-driver handshaking and fault inputs.
Recomendado
Sensor Hub and Data Logger
Sensor hub designs use the MC9S12XEG128CAL's 12-bit ADC and XGATE-accelerated I/O to sample multiple analog/digital sensors in parallel, storing raw or processed data to its 2 KB EEPROM and 12 KB RAM. The XGATE handles frequent SPI/I2C interrupts from accelerometers and pressure sensors, while the S12X main CPU executes aggregation and CAN upload. Hardware-emulated EEPROM reduces cost versus external serial EEPROM and supports in-the-field calibration updates.
Recomendado
Consumer Appliance Control Board
Consumer appliances such as washing machines, dishwashers, and induction cooktops frequently embed an HCS12X MCU like the MC9S12XEG128CAL for its blend of affordability, deterministic real-time response, and high GPIO count. The device drives seven-segment or LCD user interfaces via its GPIO/I/O channels, runs PID loops for temperature or motor-speed regulation, and connects to user panels via SCI or SPI. Its wide supply-voltage range (1.8 V/2.8 V/5 V multi-voltage) simplifies integration with both 3.3 V and 5 V peripheral circuits.
Recomendado
Industrial Sensor Node with Diagnostics
Ruggedized industrial sensor nodes benefit from the MC9S12XEG128CAL's 12-bit ADC, 128 KB Flash, and supervisor/user mode Memory Protection Unit, which together support safety-critical firmware architectures. The MPU enforces code-separation between safety and non-safety tasks - a regulatory requirement in functional-safety designs. With 50 MHz CPU speed, the node executes self-test routines while the XGATE offloads real-time fieldbus traffic (CAN, LIN) to maintain diagnostic coverage.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MC9S12XEG128CAL — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MC9S12XEG128MAL | MC9S12XEG128MAA | MC9S12XEQ512CAG | MC9S12XEP100MAL | S912XEG384J2CALR | S912XEQ512J2MAL |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) | QFP-80 (different footprint - not strictly drop-in) | 112-LQFP | 112-LQFP | 112-LQFP | 112-LQFP |
| Core | HCS12X (16-bit) + XGATE | HCS12X + XGATE | HCS12X + XGATE | HCS12X + XGATE | S12X + XGATE | S12X + XGATE | |
| Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | |
| Flash Memory | 128 KB | 128 KB | 512 KB | 1 MB | 384 KB | 512 KB | |
| RAM Size | 12 KB | 12 KB | 32 KB | 64 KB | 32 KB | 32 KB | |
| EEPROM | 2 KB | 2 KB | 4 KB | 4 KB | 2 KB | 4 KB | |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | |
| Lifecycle Status | Active | Active | Active | Active | Active | Active |
Diferenciadores clave
- True drop-in with 128KB Flash across the 112-LQFP 20x20 footprint (frente a MC9S12XEQ512CAG)
- Memory Protection Unit enables supervisor/user mode separation (frente a MC9S12DP512CPVER)
- Industrial-grade operating temperature range (frente a MC9S12XEG128MAA)
Notas de diseño
The MC9S12XEG128CAL integrates an internal voltage regulator; VDDR (pin 2) still requires a decoupling capacitor as listed in the datasheet reference section. Tie VDDX1 (pin 112) and VDDX2 (where present) to the same 5V rail as VDD; separate analog supply pins (VDDA/VSSA) share a common ground but should be filtered individually to keep ADC noise floor low.
Route the XTAL/EXTAL traces as short as possible, symmetric, and guarded by a ground ring to avoid noise injection to the PLL. Place the loop filter components for the internal PLL within 1 cm of the package. Keep the BKGD pin trace short and isolated from switching lines (PWM) to enable clean BDM debug sessions during development.
Avoid programming the Flash while in supervisor mode if the application relies on user-mode execution - the memory protection unit (MPU) can lock the device if the wrong descriptor is loaded. Always validate the EEPROM emulation algorithm (EEERAS/EEPROG) against the application's wear profile before relying on it for production data retention.
The 112-LQFP (20x20 mm) package requires 4-layer PCB stack-up for clean ADC results: dedicated analog ground plane, VDDX power island, and a signal layer for digital return paths. Reserve a quiet zone around ADC port pins (PF0-PF7) and avoid crossing PWM traces to keep switching noise away from analog signal paths.
When using the CAN bus peripheral, add a 120-ohm termination resistor on each bus end and place a TVS diode near the CAN_H/CAN_L pins to survive automotive transients per ISO 7637. The XGATE co-processor can manage CAN TX/RX interrupts with deterministic latency, but only if the CAN bus is properly terminated to avoid reflection-induced glitches.
Información de cumplimiento
RoHS and lead-free compliant per NXP product page and DigiKey product listing. Not AEC-Q100 qualified; for AEC-Q100 automotive applications, evaluate NXP's automotive-grade HCS12X variants separately.
