Microcontroladores

Productos (18172)

SAK-TC364DP-64F300F - AURIX TC36x Dual-Core 300MHz MCU | Infineon
SAK-TC364DP-64F300F

SAK-TC364DP-64F300F - AURIX TC36x Dual-Core 300MHz MCU | Infineon

The Infineon SAK-TC364DP-64F300F AA is an automotive-grade 32-bit TriCore AURIX TC36xDP microcontroller engineered for safety-critical powertrain, chassis, and ADAS applications. The device integrates two TriCore v1.6.2 cores running at 300 MHz each, supported by a checker-core (lockstep) configuration that enables ISO 26262 ASIL-D capability. The TC36xDP delivers 4 MB of embedded program flash, 672 KB of SRAM, and on-chip peripherals including 100 Mbit Ethernet, multiple CAN-FD ports, LIN, SPI, and a hardware security module. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and interrupt control on one die. In the automotive electronics hierarchy, an automotive MCU sits above general-purpose MCUs in functional-safety requirements because it must meet ASIL ratings defined by ISO 26262. The AURIX TC36xDP family is part of Infineon's second-generation AURIX family (TC3xx) and is positioned between the smaller TC33x and the larger TC37x/TC38x/TC39x devices, balancing performance, memory, and package cost for chassis and body-domain ECUs. Key features of the SAK-TC364DP-64F300F include a hardware ECC unit on flash, built-in general-purpose timer (GPT) modules, integrated LDO voltage regulators, and a dedicated Peripheral Control Processor (PCP) for offloading interrupt-driven tasks from the main TriCore cores. The device supports single-voltage supply operation, multiple wake-up sources, and Infineon’s HSM (Hardware Security Module) for secure boot and cryptographic acceleration. Typical power consumption is below 2 W across the full temperature range. The TC36xDP is built on a 65 nm embedded flash technology and includes a lockstep checker core that runs in parallel with the main core for diagnostic coverage. This dual-core lockstep architecture, combined with a Safety Management Unit (SMU) and a redundant Watchdog Timer, provides the systematic and random fault detection required for ASIL-D applications. The integrated DMA engine has multiple channels for high-throughput data movement between peripherals and memory. Typical applications include automotive chassis control (brake, steering, suspension), electric power steering (EPS), airbag ECUs, battery management systems for xEV, and zone/body domain controllers. The device's 100 Mbit Ethernet MAC makes it suitable for in-vehicle networking backbones, while the multiple CAN-FD channels support traditional automotive bus architectures. The integrated HSM also supports secure OTA (over-the-air) firmware update requirements. When designing with the TC36xDP, ensure that the lockstep mode is properly configured before ASIL-D safety claims can be made. Decoupling capacitors must be placed close to all VDD pins, and the external crystal or clock source must meet the jitter requirements specified in the Infineon TC3xx user manual for Ethernet and CAN-FD communication. JTAG/DAP access pins should be routed to a secure test header for production programming. This page synthesizes distributor pricing, AURIX family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate second-source options for safety-critical automotive designs.

USD $15,20 En stock
SAK-TC364DP-64F300FAA - 300MHz Dual-Core AURIX MCU | Infineon
SAK-TC364DP-64F300FAA

SAK-TC364DP-64F300FAA - 300MHz Dual-Core AURIX MCU | Infineon

The Infineon SAK-TC364DP-64F300FAA is a 32-bit TriCore AURIX TC36xDP automotive microcontroller featuring two TriCore cores running at 300 MHz, 4 MB of flash memory, and a PG-TQFP-144-27 package. It belongs to Infineon's second-generation AURIX (TC3xx) family, which increases performance, memory, and connectivity to address new automotive and industrial trends. A microcontroller unit (MCU) is an integrated circuit that combines a processor core, memory, and programmable peripherals in a single chip, forming the computational heart of embedded systems. Within the MCU hierarchy, the AURIX TC3xx family targets functional-safety applications, positioned above general-purpose MCUs and alongside other automotive safety MCUs such as those meeting ISO 26262 ASIL-D requirements. Key features include 100 Mbit Ethernet connectivity, ISO 26262 ASIL-D functional safety support, hardware ECC memory protection, an integrated LDO voltage regulator, general-purpose timers, a memory protection unit (MPU), and a hardware security module (HSM) for secure boot. The dual-core lockstep architecture enables error detection for safety-critical functions, while the TriCore unified core combines microcontroller, DSP, and RISC capabilities for efficient execution of control code and signal processing algorithms. The device operates from -40C to +125C (automotive temperature grade), requires a 3.3V I/O supply and 1.25V core supply, and can dissipate up to 2W under full load. RoHS compliance and long-term availability support multi-year automotive production programs. Typical applications include ADAS sensor fusion, automotive gateways and domain controllers, engine and transmission control, battery management systems (BMS), and industrial automation. The 100 Mbit Ethernet interface enables high-bandwidth communication in zonal architectures. Design consideration: use the integrated LDO or an external 1.25V regulator for the core rail, and follow Infineon power-supply decoupling guidelines to minimize noise and ensure stable operation at 300 MHz.

USD $11,95 En stock
SAK-TC387QP-160F300S - 32-bit AURIX TC3xx Quad-Core MCU | Infineon
SAK-TC387QP-160F300S

SAK-TC387QP-160F300S - 32-bit AURIX TC3xx Quad-Core MCU | Infineon

The Infineon SAK-TC387QP-160F300S is a 32-bit quad-core automotive microcontroller from the AURIX TC3xx second-generation family, featuring four TriCore TC1.6.2 cores running at up to 300 MHz with two lockstep checker cores for functional safety, 10 MB of embedded flash (40 nm technology), and housed in a PG-LFBGA-292-11 package. It supports 1 Gbit Ethernet connectivity and is qualified to ISO 26262 ASIL-D for the highest automotive safety integrity level. An AURIX TC3xx microcontroller is a multi-core TriCore-based system-on-chip designed for next-generation automotive and industrial safety-critical applications. TriCore architecture uniquely combines microcontroller (MCU), DSP, and RISC instruction sets into a single CPU, optimized for embedded real-time control. The TC3xx second generation increases performance, memory, connectivity, and scalability over the first-generation TC2xx, addressing electrification, ADAS, and zonal E/E architecture trends. Key features of the SAK-TC387QP-160F300S include four TriCore cores at 300 MHz with hardware lockstep for safety, 10 MB program memory (FLASH), 1 Gbit Ethernet interface for high-bandwidth in-vehicle networking, integrated HSM (Hardware Security Module) for secure boot and cryptographic acceleration, and a comprehensive peripheral set including multiple CAN-FD, LIN, SPI, and QSPI interfaces. The PG-LFBGA-292-11 BGA package supports high-density PCB designs typical of zonal and domain controllers. Architecturally, the TC387QP leverages Infineon's proven lockstep checker-core pattern inherited from the TC2xx family, where two cores execute the same instruction stream and a hardware comparator flags divergence, enabling latent fault detection without software overhead. The 40 nm embedded flash process supports high-speed read-while-write operation, allowing EEPROM emulation and OTA firmware updates without CPU stall. Typical applications include automotive zone controllers, electric vehicle (EV) battery management systems, advanced driver-assistance systems (ADAS) sensor fusion ECUs, domain controllers, industrial safety PLCs, and motor control inverters for traction and servo drives. The 1 Gbit Ethernet capability specifically targets backbone and zonal networks in next-generation E/E architectures. When designing with this device, ensure adequate thermal relief under the BGA thermal pad and follow Infineon's PCB layout guidelines for the PG-LFBGA-292-11 footprint. The two lockstep checker cores reduce usable application throughput by approximately 50% compared to a 4-core non-lockstep MCU; choose the TC387QP variant (lockstep) only when ASIL-D decomposition requires it. This page synthesizes distributor pricing, drop-in suffix variants, and practical BGA-layout design notes that are not consolidated in the manufacturer brief datasheet.

USD $25,95 En stock
SAK-XC2080M-104F80L - 16-bit MCU 80MHz 832KB Flash | Infineon
SAK-XC2080M-104F80L

SAK-XC2080M-104F80L - 16-bit MCU 80MHz 832KB Flash | Infineon

The Infineon SAK-XC2080M-104F80L is a 16-bit microcontroller from the XC2000 family, featuring an 80 MHz C166SV2 core, 832 KB of embedded Flash, and a 144-pin LQFP package designed for safety-critical automotive and industrial applications. Key specifications include 832 KB program Flash with ECC, 138 KB on-chip SRAM, an 80 MHz system clock, and a 16-bit C166SV2 CPU with five-stage pipeline and MAC unit. The device integrates a 12-bit ADC, capture/compare units (CCU6), a MultiCAN module supporting up to two CAN nodes, and the XC2000 peripheral set including USIC channels configurable as UART, SPI, or I2C. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (RAM), and configurable peripherals on a single die. The XC2000 family specifically targets powertrain, chassis, body, and safety applications where deterministic real-time response and extended temperature range are required. Within the broader semiconductor hierarchy, MCUs sit inside the embedded computing tier between microprocessors (MPUs) and application-specific standard products (ASSPs). The SAK-XC2080M-104F80L is built on a 0.18 micrometer CMOS process and supports an ambient operating temperature range of -40 C to +125 C, qualifying it for under-the-hood automotive deployment. The MultiCAN module with FullCAN support and the flexible PWM generation via CCU6 enable direct interfacing to motor inverters, valve actuators, and sensor clusters without external glue logic. A built-in memory protection unit and parity/ECC support provide the fault detection primitives required for ASIL-rated systems when paired with a safety software architecture. Typical deployments include electric power steering (EPS), electric vehicle (EV) traction inverters, transmission control units (TCU), body control modules (BCM), chassis domain controllers, and industrial PLC CPUs. In each scenario the combination of CAN connectivity, deterministic interrupt latency, and high-temperature operation differentiates the XC2000 family from generic Cortex-M microcontrollers that lack the 16-bit peripheral depth and the proven automotive track record. Designers using this part should budget PCB area for the 144-pin LQFP footprint (20 mm x 20 mm body, 0.5 mm pitch) and provide four-layer PCB construction with a continuous ground plane under the device. The integrated voltage regulator requires only a single 3.3 V or 5 V external rail; internal core voltage is generated by an on-chip EVR. Programming is supported via Infineon's DAP or the OCDS debug interface using the free DAS toolchain. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $9,95 En stock
SAK-XC2080M-104F80LAA - 16-bit XC2000 MCU, 80MHz, LQFP-144 | Infineon
SAK-XC2080M-104F80LAA

SAK-XC2080M-104F80LAA - 16-bit XC2000 MCU, 80MHz, LQFP-144 | Infineon

The Infineon SAK-XC2080M-104F80LAA is a 16-bit microcontroller from the legacy XC2000 family, featuring an 80 MHz C166SV2 core, 832 KB on-chip Flash, and 82 KB SRAM, housed in a 144-pin LQFP package. It is specified for automotive temperature grades and designed for safety-critical embedded applications where deterministic real-time performance is required. What is a 16-bit automotive microcontroller? A 16-bit MCU is a microcontroller whose central processing unit operates on a 16-bit data path, sitting in the hierarchy between 8-bit controllers (e.g., 8051) and 32-bit application processors (e.g., ARM Cortex-M). The XC2000 family specifically targets powertrain, chassis, body, and driver-assistance systems where deterministic interrupt latency, on-chip CAN/LIN connectivity, and single-voltage Flash operation matter more than raw MHz. Within Infineon's portfolio it sits below TriCore AURIX and above 8-bit XC800 devices. Key features include the C166SV2 CPU with 5-stage pipeline, 832 KB Flash supporting in-application programming, 82 KB SRAM with parity, and a peripheral set including up to 6 CAN nodes (TTCAN-capable), LIN, FlexRay, and a 12-bit ADC with up to 16 channels. The device integrates a DMA controller, capture/compare units, and a MultiCAN module supporting ISO 11898-1. The architecture uses a von Neumann-style memory model with 24-bit linear addressing up to 16 MB, plus a 16 KB on-chip code SRAM that can be mapped for cache or direct execution. The on-chip voltage regulator permits single 5V supply operation, simplifying automotive 12V board design after a downstream pre-regulator. Typical applications include automotive body control modules, electric power steering, gateway ECUs, industrial automation controllers, and CAN node endpoints in vehicle networks. The -104F80LAA suffix indicates 104 MHz CPU capability (bin-limited to 80 MHz), 832 KB Flash, 144-pin LQFP package, and an automotive-grade temperature profile. When designing with this part, ensure the operating system uses the device's memory protection unit and watchdog correctly. Migration to a newer AURIX TC2xx/TC3xx part is recommended for new designs; the SAK-XC2080M-104F80LAA is now positioned as a legacy continuity-of-supply component through Rochester Electronics and authorized distributors. This page synthesizes distributor inventory status, drop-in alternatives within the same XC2000 family, and practical design considerations for engineers maintaining legacy XC2000 designs or sourcing for long-life programs.

USD $17,40 En stock
SAK-XC866-4FRI - 8-Bit XC800 MCU, 16KB Flash, PG-TSSOP-38 | Infineon
SAK-XC866-4FRI

SAK-XC866-4FRI - 8-Bit XC800 MCU, 16KB Flash, PG-TSSOP-38 | Infineon

The Infineon SAK-XC866-4FRI is an 8-bit microcontroller from the XC800 family combining a high-performance 8051 core (XC800 CISC architecture) with on-chip Flash memory and powerful on-chip peripherals, offered in the PG-TSSOP-38 package. It integrates 16 KB of program Flash, runs at up to 26.67 MHz system clock (with internal 48 MHz clock domain reported on datasheet aggregators), and targets 3.3 V or 5 V applications in industrial and automotive-grade environments (SAK suffix indicates the automotive temperature grade). A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and integrated peripherals such as timers, ADC, communication interfaces, and GPIO. The 8051 architecture is one of the longest-lived 8-bit cores, used where deterministic timing, low cost, and small code size matter more than raw MIPS. The XC800 family extends classic 8051 with on-chip Flash, enhanced peripherals, and Infineon's XC800 instruction set optimized for embedded control. Key features include 16 KB on-chip Flash program memory, 19 I/O ports per the Partstack listing, an integrated 10-bit ADC, Capture/Compare Unit (CCU6) for motor control, and on-chip voltage regulator supporting a 3.0 V to 5.5 V supply range. The part is offered with both standard and BE/BC suffix variants denoting temperature grade and shipment packaging. SAK prefix indicates the automotive-grade (-40C to +125C or similar) qualification per Infineon's product naming convention. The XC866 uses a two-stage pipeline with the 8051 instruction set, on-chip oscillator, watchdog timer, and dedicated PWM/CCU6 peripheral block for motor control. Peripherals are memory-mapped and accessed via SFRs. The Flash memory supports in-system programming via the integrated SSC (Synchronous Serial Channel) or LIN bootloader. Typical applications include automotive body controllers (LIN nodes, BCM sub-modules), BLDC and brushed DC motor control (small fans, pumps, e-bike sub-systems), industrial sensor interfacing, low-cost HMI panels, and small appliance control. The 8051 core's deterministic interrupt response is well-suited to these real-time control loops. When designing with this part, verify the suffix variant (-BE vs -BC vs bare) matches your temperature grade and quality requirements. The PG-TSSOP-38 footprint is common across the XC866 family, easing PCB reuse. Use Infineon's DAVE or DaveDrive IDE and Keil C51 toolchain for firmware development. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in any single manufacturer document.

USD $2,65 En stock
SAL-TC277TP-64F200NDC - AURIX TC27xT 200MHz MCU | Infineon
SAL-TC277TP-64F200NDC

SAL-TC277TP-64F200NDC - AURIX TC27xT 200MHz MCU | Infineon

The Infineon SAL-TC277TP-64F200NDC is a high-performance 32-bit TriCore microcontroller from the AURIX TC27xT family, designed for automotive and industrial functional safety applications. It features a triple-core architecture with three independent 32-bit TriCore CPUs running at 200 MHz, 4 MB of embedded Flash, and Ethernet connectivity, delivered in a 292-ball LFBGA package (PG-LFBGA-292-6). An AURIX TC2 microcontroller is a multicore automotive-grade MCU built on Infineon's TriCore architecture, which unifies microcontroller, DSP, and RISC capabilities in a single processor core. Within the power management and embedded control hierarchy, it sits at the top of real-time safety MCUs, classified as a 32-bit multicore microcontroller for ISO 26262 ASIL-D systems. Key features include the innovative multicore architecture with up to three independent 32-bit TriCore CPUs engineered to meet the highest safety standards, a powerful Generic Timer Module (GTM) for precise PWM generation, and an integrated Ethernet controller for high-speed in-vehicle networking. Four CAN nodes support legacy automotive bus communication, and lockstep execution with memory protection units enables safe task isolation. The TC27xT family is designed to reduce system complexity and power consumption while achieving best-in-class real-time performance. Task partitioning across the three cores allows safety-critical functions to run independently from non-critical application software, improving system reliability and reducing certification effort for ASIL-D software development. Typical applications include automotive engine control units (ECUs), transmission control, battery management systems (BMS), electric power steering, and advanced driver assistance systems (ADAS). The Ethernet interface supports vehicle-to-everything (V2X) communication and over-the-air (OTA) software updates, while long-term availability makes it a preferred choice for automotive OEMs and tier-1 suppliers. When designing with this MCU, pay close attention to power supply sequencing between the 3.3V I/O and 1.3V core rails, and use proper decoupling and PCB layout practices to minimize noise on the GTM and Ethernet interfaces.

USD $39,96 En stock
SAL-TC298TP-128F300L - AURIX TC298 300MHz 8MB Flash MCU | Infineon
SAL-TC298TP-128F300L

SAL-TC298TP-128F300L - AURIX TC298 300MHz 8MB Flash MCU | Infineon

The Infineon SAL-TC298TP-128F300L is an AURIX TC2xx family 32-bit TriCore microcontroller from Infineon's safety-rated automotive MCU portfolio, operating at 300 MHz with 8 MB of embedded Flash and 100 Mbit Ethernet connectivity. Housed in a BGA package and qualified per ISO 26262, this device belongs to the high-throughput TC29xT sub-family aimed at safety-critical powertrain, chassis, and ADAS domain controllers. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. In the AURIX hierarchy, TriCore combines RISC, DSP, and microcontroller instruction sets into one superscalar core, allowing deterministic real-time control alongside signal processing. The TC29xT extends this with lockstep cores, redundant peripherals, and hardware security modules for ASIL-D-capable systems. Key features of the SAL-TC298TP-128F300L include up to 300 MHz TriCore CPU performance, 8 MB Program Flash with ECC, multiple CAN-FD and LIN channels, 100 Mbit Ethernet MAC, GTM (Generic Timer Module), CCU6, and Hardware Security Module (HSM). The device integrates up to six cores in a mix of main and lockstep pairs for safety applications. Debug access is supported via Infineon DAVE, MemTool, Altium TASKING compiler, Hitex HiTOP, and ARM KEIL uVision toolchains. The TC298T architecture separates safety-critical tasks across heterogeneous cores, ensuring deterministic interrupt latency and hardware-based fault detection. Memory protection and ECC across Flash and RAM guard against soft errors, while the on-chip GTM enables complex PWM generation for motor control, automotive lighting, and powertrain applications without CPU intervention. Typical applications include automotive engine management, electric vehicle traction inverters, transmission control units, ADAS sensor fusion, chassis domain controllers, and industrial safety PLCs. The 100 Mbit Ethernet and CAN-FD interfaces suit modern zonal vehicle architectures where high-speed backbone communication is essential. When designing with this part, ensure the PCB has adequate thermal copper for the BGA package, route the Ethernet MII/RGMII signals with controlled impedance, and follow Infineon's AURIX hardware design guide for decoupling and reset circuit implementation. The SAL suffix indicates special product variant ordering code configuration.

USD $42,50 En stock
SAL-TC298TP-128F300N - AURIX TC2 300MHz TriCore MCU | Infineon
SAL-TC298TP-128F300N

SAL-TC298TP-128F300N - AURIX TC2 300MHz TriCore MCU | Infineon

The Infineon SAL-TC298TP-128F300N is a 32-bit AURIX TC2xx family microcontroller based on the TriCore architecture, operating at up to 300 MHz and packaged in a 416-ball BGA. It integrates 8 MB of program Flash, 728 KB of SRAM (including cache), six CAN nodes, FlexRay, 100 Mbit Ethernet, and up to 21 ADC modules, targeting ISO 26262-compliant automotive and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. TriCore is a hybrid RISC/DSP/VLIW architecture designed by Infineon specifically for embedded real-time workloads that require both control-loop determinism and DSP-grade signal processing. Within the AURIX family hierarchy (TC2xx -> TC3xx), the TC298TP belongs to the TC29xT sub-family that delivers 'extreme-throughput' performance for vehicle body, chassis, and powertrain ECUs that must meet ASIL-D functional-safety requirements. Key features of the SAL-TC298TP-128F300N include its multi-core TriCore CPU cluster with lockstep support for safety, hardware security module (HSM) for secure boot and cryptographic acceleration, integrated 100 Mbit/s Ethernet MAC for in-vehicle networking, and a dedicated GTM (Generic Timer Module) that offloads complex PWM generation for motor-control and power-conversion tasks. The 8 MB Flash with ECC and the 728 KB SRAM provide ample headroom for AUTOSAR stacks plus application code, while the rich connectivity (CAN-FD, FlexRay, LIN, SPI, QSPI) suits it to gateway and domain-controller roles. Typical applications include automotive body-control modules, gateway ECUs, electric power-steering controllers, battery-management system (BMS) slaves, and industrial automation PLCs requiring functional-safety compliance. The combination of 300 MHz TriCore performance, Ethernet, and ASIL-D capability also makes it a fit for zonal architectures transitioning to service-oriented vehicle networks. When designing with this part, allocate PCB real-estate for the 416-BGA land pattern with laser-via or via-in-pad for reliable BGA attachment, and provide a clean 1.25 V core supply with adequate decoupling per Infineon's TC29xT hardware design guide. Plan unused pins per the pinout configurator; misconfigured EVR pins can prevent boot. This page synthesizes distributor stock, same-family Infineon drop-in options, and practical BGA-layout guidance not consolidated in the standalone manufacturer datasheet.

USD $25,10 En stock
SAM9X60D6K-I/4GB - 600MHz ARM926 MPU, 64Mb SIP SDRAM | Microchip
SAM9X60D6K-I/4GB

SAM9X60D6K-I/4GB - 600MHz ARM926 MPU, 64Mb SIP SDRAM | Microchip

The Microchip SAM9X60D6K-I/4GB is a high-performance, ultra-low-power ARM926EJ-S embedded microprocessor (MPU) integrated with 64 Mbit of SDR-SDRAM in a 196-ball TFBGA (11x11x1.20 mm) System-in-Package (SiP), running up to 600 MHz. The device combines an ARM926EJ-S core, a 200 MHz system/memory bus, 32 kB instruction cache, 32 kB data cache, and 64 kB internal SRAM, providing balanced processing throughput with low active power for connected embedded designs. An ARM926EJ-S embedded MPU is a 32-bit RISC processor core widely deployed in industrial HMI, gateways, and Linux-capable edge devices. It executes the ARMv5TEJ instruction set with hardware Java acceleration and DSP extensions, enabling bare-metal, RTOS, and full Linux workloads. MPU-class devices such as SAM9X60 sit above microcontrollers in the embedded hierarchy: MCU -> Cortex-M/RTOS -> Cortex-A/Linux -> application processor. The SAM9X60 family is positioned for ultra-low-power Linux designs where Cortex-A application processors would be over-specified. Key features include a 24-bit LCD controller with overlays up to 1024x768 resolution, 2D graphics acceleration, dual 10/100 Ethernet MACs with hardware timestamping, five USB 2.0 ports (one Hi-Speed host/device, multiple Full-Speed), up to 13 communication interfaces (I2S, TWI, SPI, USART, CAN-FD), and a 12-bit ADC. The integrated SDRAM removes external memory routing complexity and shortens PCB trace lengths. Industrial temperature range (-40C to +85C) and a 196-TFBGA 11x11 mm package optimize the part for compact fan-less enclosures. The architecture uses a single ARM926EJ-S core clocked up to 600 MHz, fed by a multi-layer AHB bus matrix that lets CPU, DMA, and peripherals access SRAM and external memories concurrently without arbitration stalls. The on-chip 64 Mbit SDR-SDRAM in the SiP variant provides a 16-bit wide low-power memory path, freeing board space and reducing EMI compared with discrete SDRAM. Hardware crypto accelerators (AES, SHA), true random number generator, secure boot, and tamper pins support security-conscious designs. Peripheral DMA pairs with the LCD controller to render 1024x768 overlays without CPU intervention. Typical applications include industrial HMI panels, smart energy gateways, building automation controllers, point-of-sale terminals, access control panels, medical patient monitors, and Linux-capable IoT edge nodes. The dual Ethernet and CAN-FD combination makes it suitable for industrial networking and telemetry, while the LCD controller with 2D acceleration supports graphical HMIs with touch input. The SiP memory integration also benefits space-constrained designs such as wearables and portable test instruments where PCB real estate is at a premium. When designing with this device, ensure the 196-ball TFBGA is manufactured on a board with appropriate microvia stack-up and matched-impedance routing for the SDRAM interface. Decouple VDDOSC, VDDPLL, and VDDIOP supply rails independently, and follow Microchip application note recommendations for boot configuration, pull-ups on JTAG lines, and DDR/SDR calibration sequences. Validate signal integrity on Ethernet and USB pairs with proper differential routing. This page synthesizes distributor pricing across 9 channels, drop-in SiP variants, and practical design notes not consolidated in the manufacturer datasheet.

USD $19,50 En stock
SAM9X60T-V/DWB - 600MHz ARM926EJ-S MPU, 228-TFBGA | Microchip
SAM9X60T-V/DWB

SAM9X60T-V/DWB - 600MHz ARM926EJ-S MPU, 228-TFBGA | Microchip

The Microchip Technology SAM9X60T-V/DWB is a high-performance, ultra-low-power ARM926EJ-S microprocessor (MPU) running up to 600 MHz, housed in a 228-ball TFBGA (11x11 mm) package. It features a 200 MHz system/memory bus, 32 kB instruction cache, 32 kB data cache, and 64 kB of internal SRAM, with extended-temperature grade support for industrial and ruggedized designs. What is an ARM926EJ-S MPU? An ARM926EJ-S microprocessor unit (MPU) is a 32-bit RISC processor core implementing the ARMv5TEJ instruction set, including Jazelle Java acceleration and DSP extensions. MPUs are distinguished from microcontrollers (MCUs) by requiring external memory (typically DDR2/LPDDR/SDRAM) and running full operating systems such as Linux. Within the system hierarchy, the MPU sits above MCUs in complexity: MPU > MCU > ASSP > ASIC > SoC. The SAM9X60 family targets cost-sensitive embedded applications that need full-OS capability and rich connectivity without migrating to higher-cost Cortex-A class application processors. Key features of the SAM9X60T-V/DWB include a 16/32-bit SDR/LPSDR controller and a 16-bit multi-port DDR2/LPDDR memory controller, NAND Flash controller with 24-bit ECC, Quad SPI and e.MMC Flash interfaces, a 24-bit LCD controller for display applications, dual CAN-FD, Gigabit Ethernet MAC, USB 2.0 High-Speed Host and Device, image sensor interface, and 12-bit ADC. Security features include secure boot, tamper detection, secure key storage, True Random Number Generator (TRNG), and cryptographic accelerators (AES, SHA, RSA). Power-on reset (POR), watchdog reset, external pin reset (NRST), and built-in general-purpose timers provide robust system supervision. Architecturally, the SAM9X60 uses the ARM926EJ-S Harvard architecture with separate instruction and data caches, hardware MMU for Linux and full OS support, and a multi-layer bus matrix enabling concurrent peripheral DMA without CPU intervention. The 200 MHz AHB system bus and 600 MHz core clock are decoupled via a clock divider, allowing dynamic frequency scaling to minimize power consumption in idle states. Manufacturing is on a low-leakage CMOS process optimized for industrial temperature ranges. Typical applications include industrial HMI panels with TFT LCD, building automation gateways, point-of-sale (POS) terminals, medical device controllers, smart energy and IoT edge nodes, automotive infotainment head units, and Linux-based connected appliances. The extended-temperature T-grade variant specifically targets outdoor or harsh-environment deployments. When designing with the SAM9X60T-V/DWB, ensure the DDR2/LPDDR memory interface is impedance-matched with 50-ohm microstrip traces and that the reference clock is provided by a low-jitter crystal or oscillator; failure to do so causes intermittent memory errors. Use the Microchip-provided Linux BSP from linux4sam.github.io to minimize boot-time debugging. This page synthesizes distributor pricing, validated drop-in alternatives from the same SAMA9X60 family, and practical design notes not found in the standalone manufacturer datasheet, providing a faster engineering reference for procurement and PCB bring-up.

USD $21,20 En stock
SC56F826BU80AE - 16-bit DSP, 80MHz, 32KB Flash MCU | NXP
SC56F826BU80AE

SC56F826BU80AE - 16-bit DSP, 80MHz, 32KB Flash MCU | NXP

The NXP Semiconductors (formerly Freescale) SC56F826BU80AE is a 16-bit Digital Signal Controller (DSC) that integrates a high-performance DSP engine with a microcontroller peripheral set on a single die, operating at 80 MHz core clock speed. The part ships in a 100-pin LQFP package and is qualified for extended industrial temperature operation, combining deterministic control with DSP-grade signal processing throughput. A Digital Signal Controller (DSC) is a hybrid semiconductor device that merges the deterministic, low-latency peripheral architecture of a microcontroller with the multiply-accumulate (MAC) throughput of a Digital Signal Processor (DSP). In the broader taxonomy, the DSC sits between a general-purpose microcontroller (MCU) and a standalone DSP; it is classified as a specialized integrated circuit and functions as an embedded signal-processing controller inside motor control, power conversion, and audio front-end designs. Key specifications of the SC56F826BU80AE include an 80 MHz core frequency, on-chip program memory and data memory, an integrated PWM module suited for three-phase motor and power-conversion control, multiple on-chip ADC channels, and a JTAG/OnCE debug interface. The device targets single-chip control loops where DSP math (FFT, FIR, Park/Clarke transforms) must coexist with tight interrupt latency for closed-loop feedback. Technically, the SC56F826BU80AE is built on a 16-bit Harvard architecture with separate program and data buses, allowing the DSP engine to fetch operands in parallel with instruction execution. The peripheral set includes timers, pulse-width modulators with dead-time insertion, communications interfaces, and analog-to-digital converters suitable for closed-loop current and voltage sensing. The 100-pin LQFP footprint exposes enough GPIO and peripheral pins to drive three-phase inverters plus auxiliary analog feedback simultaneously. Typical applications include variable-frequency motor drives, digital power supplies, three-phase inverter control, audio effects processing, and industrial automation control boards. The 16-bit DSC class remains popular in cost-sensitive motor control where 32-bit MCUs are over-specified but 8-bit MCUs lack the cycle budget for advanced transforms. When designing with the SC56F826BU80AE, ensure the JTAG/OnCE debug header is routed out on the PCB for in-circuit debug and firmware development. Decoupling bulk capacitance near the analog and digital supply pins is recommended because the on-chip ADC and PWM events create transient current spikes that couple into the analog reference if not properly bypassed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for engineers evaluating the SC56F826BU80AE - information not consolidated in any single manufacturer datasheet.

USD $18,95 En stock
SC667112CLC - 8-Bit S08 Core MCU, 20MHz, 16KB Flash | NXP
SC667112CLC

SC667112CLC - 8-Bit S08 Core MCU, 20MHz, 16KB Flash | NXP

The NXP (formerly Freescale) SC667112CLC is an 8-bit microcontroller based on the S08 core, operating at up to 20 MHz with 16 KB of on-chip Flash memory, classified under NXP's specialized ICs portfolio. The part is supplied in a surface-mount LQFP (low-profile quad flat pack) package and targets cost-sensitive embedded control applications that require deterministic 8-bit processing, integrated Flash for firmware storage, and a small PCB footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a range of peripheral interfaces onto one semiconductor die. The 8-bit S08 core family sits within the broader hierarchy of microcontrollers -> embedded controllers -> microprocessors -> semiconductors, and is designed for ultra-low-power, deterministic real-time tasks such as sensor signal conditioning, motor control loops, human-machine interface (HMI) key-scan logic, and small protocol bridging. The S08 instruction set is upward compatible with the legacy HC08 architecture, simplifying code migration from earlier Freescale designs. Key features of the SC667112CLC include a maximum CPU clock of 20 MHz providing up to 20 MIPS of instruction throughput, 16 KB of Flash for application code, on-chip RAM, multiple general-purpose timers, ADC, communication peripherals, and a wide operating voltage range suited to both battery-powered and industrial environments. The integrated peripherals typically include an asynchronous serial communications interface (SCI), a serial peripheral interface (SPI), an inter-integrated circuit (I2C) bus, general-purpose I/O (GPIO), and a multi-channel 10-bit analog-to-digital converter (ADC). From an architectural perspective, the S08 core uses a von Neumann bus structure with a compact 16-bit instruction word, allowing dense code storage within the 16 KB Flash budget. Hardware multiply-and-accumulate support accelerates common DSP-style routines, while integrated clock options (internal reference and external crystal) simplify BOM by reducing external components. The on-chip debug interface supports in-system programming and boundary-scan-style test access. Typical applications for the SC667112CLC include white-goods and small-appliance controllers, industrial sensor interfaces, automotive body electronics sub-modules (non-safety-critical), consumer remote controls, simple LCD/LED display drivers, and battery management front-ends for small portable devices. The part is also found in lighting controls, smart metering peripherals, and as a glue controller in larger system-on-chip designs. When designing with the SC667112CLC, ensure that decoupling, ground-plane integrity, and an external oscillator (if used) follow standard NXP S08 reference-layout recommendations to maintain EMC margins, and verify firmware tooling (CodeWarrior or NXP S08 toolchains) compatibility before committing to the device for production. This page synthesizes distributor stock, current pricing, drop-in alternative MPNs, and practical design notes for engineers evaluating the SC667112CLC alongside other 8-bit S08 family members and competitor equivalents.

USD $2,92 En stock
SC705C8AE0VFBE - 8-Bit 8K RAM MCU | NXP | Embedded
SC705C8AE0VFBE

SC705C8AE0VFBE - 8-Bit 8K RAM MCU | NXP | Embedded

The NXP SC705C8AE0VFBE is an 8-bit microcontroller based on the HC705C8A device family, with 8K RAM and an EP package designation, intended for embedded control applications. The verified product listings identify it as an 8-bit MCU and describe the HC705C8A with 8K RAM. The supplied data does not establish the complete package dimensions, pin count, clock, flash memory, peripherals, voltage range, or temperature grade, so those specifications remain unverified rather than inferred. What is an 8-bit microcontroller? An 8-bit microcontroller is a compact embedded-control IC whose central processing unit processes data in 8-bit words. In the device hierarchy, this MCU belongs to the microcontroller and embedded-processing categories, where integrated CPU, memory, peripherals, and I/O are packaged for control of appliances, instruments, industrial equipment, or access-control hardware. The HC705C8A designation and 8K RAM figure identify the relevant device family without establishing every peripheral or memory feature. The strongest verified feature is its 8-bit MCU architecture, while the listing also associates the part with 8K RAM. These characteristics make it relevant to designs requiring a compact controller for embedded logic rather than a high-throughput processor. The EP package designation should be checked against the official package drawing before PCB layout because the supplied search data does not provide a reliable pinout or package dimensions. Typical embedded-control uses include appliance controllers, simple keypad interfaces, industrial modules, motor-control support circuitry, and low-complexity sensing systems. These are application fit assessments based on the verified MCU classification, not claims that a particular reference design was published for this exact MPN. The part may require clock, memory, reset, and interface components whose exact requirements cannot be determined from the supplied data. Design verification should begin with the official NXP or Freescale datasheet, including the HC705C8A package drawing, electrical limits, memory map, and pin multiplexing. Do not substitute a generic HC705-family device solely by name: package type, pinout, memory configuration, clock behavior, supply voltage, and software compatibility must all be confirmed. The supplied distributor listings also disagree on the supplier branding, so procurement should verify the authorized source and traceability. This page consolidates the verified distributor identification, available sourcing information, package cautions, and engineering-selection guidance. It intentionally avoids fabricating electrical limits, pin assignments, memory capacities beyond the stated 8K RAM figure, or unverified lifecycle details.

Cotización En stock
SC705C8AE0VFNE - 8-Bit HC05 MCU with 8K RAM | NXP
SC705C8AE0VFNE

SC705C8AE0VFNE - 8-Bit HC05 MCU with 8K RAM | NXP

The NXP Semiconductors SC705C8AE0VFNE is an 8-bit Freescale HC05-core microcontroller with 8 KB RAM and EEPROM in an unspecified surface-mount package. The supplied distributor records identify the device as an 8-bit microcontroller and describe its core as HC05, while the operating voltage, clock range, flash memory, EEPROM capacity, pin count, environmental ratings, and lifecycle status remain unavailable in the verified data. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and input/output interfaces into one component. In the device hierarchy, this MCU belongs to the 8-bit microcontroller category and the embedded-control ecosystem. Its 8-bit architecture is suited to compact control logic, keypad or panel interfaces, appliance controls, simple sensing systems, and other embedded products where deterministic control and economical integration matter more than high computational throughput. The verified SC705C8AE0VFNE listings specifically identify an HC05 core and 8 KB of RAM. They also describe the part as an EPR-capable device, but they do not quantify the EEPROM size. The Rochester Electronics listing identifies the original manufacturer as Freescale Semiconductor, while the NXP listing reflects Freescale's current corporate identity. Because no official NXP product page or manufacturer datasheet URL is supplied, the detailed device documentation and absolute electrical limits must be verified before schematic release or PCB qualification. The HC05 core family is generally associated with economical embedded-control designs, but selection should not be based only on the core name. Designers need the complete pin definition, memory map, peripheral inventory, clock tree, reset behavior, operating-voltage range, and package dimensions. Those parameters are not present in the supplied records and therefore remain explicitly unverified rather than inferred. Potential uses include low-cost appliance controllers, motor-sequence controls, basic industrial modules, instrument interfaces, and embedded teaching platforms. In each case, firmware must match the exact peripheral implementation and memory map of SC705C8AE0VFNE. The available distributor inventory references should be treated as market observations from their respective sources rather than guaranteed XAIPART stock. The primary design consideration is documentation risk. Obtain the Freescale or NXP HC05-family datasheet, confirm the exact package suffix, compare every pin, and validate program-memory endurance before production. Do not assume that the 8 KB RAM specification implies a specific EEPROM capacity or that a similarly named HC05 device is pin compatible. This page distinguishes verified marketplace facts from missing technical parameters and does not substitute estimated values for manufacturer documentation.

Cotización En stock
SC755BPX350LE - Power Architecture RISC Microprocessor | NXP | 360MHz
SC755BPX350LE

SC755BPX350LE - Power Architecture RISC Microprocessor | NXP | 360MHz

The NXP SC755BPX350LE is a Power Architecture RISC microprocessor from the MPC755 family, operating at a core frequency of 350 MHz with a 360 MHz front-side bus speed. Housed in a high-density Ball Grid Array (BGA) package designed for surface-mount assembly, this device is engineered for high-performance embedded computing tasks. It is a derivative part of the well-documented MPC755 line originally introduced by Motorola and continued by Freescale (now NXP), delivering strong integer and floating-point performance per watt in a compact footprint. What is a RISC microprocessor? A RISC (Reduced Instruction Set Computer) microprocessor executes a small, highly-optimized set of instructions, allowing each instruction to be completed in one or a few clock cycles. Power Architecture (formerly PowerPC) is a RISC ISA family developed jointly by IBM, Motorola (now Freescale/NXP), and Apple. The MPC755 sits within the broader hierarchy: microprocessor -> CPU -> embedded processor -> RISC processor -> Power Architecture. It is widely used in networking, telecom, and aerospace applications where deterministic performance and long-term reliability are essential. Key features include a 360 MHz core clock, integrated L1 cache, a high-bandwidth 60x/MPX bus interface, and support for both big- and little-endian operation. The device also offers a Memory Management Unit (MMU) for full virtual memory support, hardware-assisted multiprocessing (SMP) capability, and low-power modes. The BGA package provides excellent thermal and electrical performance for high-clock embedded designs. Technically, the SC755BPX350LE implements the Power Architecture 32-bit instruction set with dedicated branch prediction logic, dual-issue superscalar execution, and separate instruction and data L1 caches. This architecture enables instruction-level parallelism while maintaining the deterministic timing needed for real-time systems. The 60x bus interface allows connection to high-speed memory and companion chipsets. Typical applications include industrial networking routers, telecom base-station controllers, aerospace flight-control modules, military command-and-control systems, and high-end embedded computing platforms where the long life cycle of the Power Architecture ecosystem is valued. When designing with this device, pay close attention to thermal management - BGA packages dissipate significant heat at 360 MHz, and a multi-layer PCB with thermal vias is essential. Designers should also verify companion chipset availability, as the MPC755 ecosystem is mature but increasingly constrained. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not collected in any single manufacturer datasheet.

USD $65,85 En stock
SC8541EVTAQF - Freescale/NXP Microprocessor IC, Obsolete MPU | XAIPART
SC8541EVTAQF

SC8541EVTAQF - Freescale/NXP Microprocessor IC, Obsolete MPU | XAIPART

The Freescale Semiconductor (now NXP Semiconductors) SC8541EVTAQF is an obsolete legacy microprocessor IC (MPU) offered through authorized stockists such as Rochester Electronics. Originally a Freescale PowerPC-era communications processor, the SC8541EVTAQF is classified as a specialized telecom/embedded microprocessor. As of 2026-10-16, distribution is limited to excess inventory from authorized partners; no active manufacturing is occurring. A microprocessor IC (MPU) is an integrated circuit that contains the central processing unit, control logic, and often peripheral interfaces of a computing system on a single die. Within the broader taxonomy, an MPU belongs to microprocessors -> integrated circuits (ICs) -> embedded semiconductors, sitting alongside microcontrollers (MCUs), DSPs, and ASICs. Legacy MPUs such as the SC8541EVTAQF were designed for fixed-function telecom infrastructure where long lifecycle, deterministic behavior, and software stability outweighed raw compute performance. Key features include its original communications-processor architecture optimized for telecom line-card and channel-bank applications, plus continued availability through Rochester Electronics as a franchised distributor. Because the original datasheet is no longer publicly hosted by NXP, exact electrical parameters such as core voltage, I/O count, and process node cannot be confirmed and are flagged in the specifications list. Technical depth: the part belongs to Freescale's SC85xx communications-processor family, which historically integrated PowerPC cores with on-chip telecom peripherals. Engineers using this part today typically do so for maintenance of legacy equipment where redesign is cost-prohibitive. Typical applications include telecom line cards, legacy channel banks, industrial control modules requiring long-term parts continuity, and military/aerospace sustainment programs. It is also used by aftermarket refurbishers of legacy networking gear. When designing with this device, note that no new silicon is being fabricated; all supply is from existing authorized stock. Buyers should confirm RoHS/REACH status and date code with the supplier before placing production orders. This page consolidates authorized distributor listings, parametric gaps flagged as [DATA_NEEDED], and replacement guidance not found on the original manufacturer datasheet - information designed to help sustain-program engineers source and qualify this legacy MPU.

USD $92,00 En stock
SC8544CPXANGA - PowerQUICC Communication MPU | NXP
SC8544CPXANGA

SC8544CPXANGA - PowerQUICC Communication MPU | NXP

The NXP (formerly Freescale) SC8544CPXANGA is a PowerQUICC communication microprocessor IC in the SC8544 family, designed for embedded networking and communications applications. The part is currently shipped by Rochester Electronics as an authorized aftermarket distributor handling legacy NXP/Freescale inventory, indicating this is an older-generation MPU kept available for long-life-cycle systems. The base die is the SC8544 PowerQUICC communications processor. A PowerQUICC (PowerQUICC) processor is a family of communications-oriented microprocessors originally developed by Motorola/Freescale (now NXP Semiconductors). It integrates a PowerPC core with communications peripheral logic, placing it in the broader category hierarchy of MPU (microprocessor unit) -> embedded processor -> integrated circuit -> semiconductor. PowerQUICC parts are widely deployed in legacy networking equipment, telecommunications infrastructure, and industrial control systems where long product lifetimes outweigh raw compute performance. Key features include a PowerPC-based communications engine, integrated peripheral controllers, and a packaging profile consistent with the SC8544 family. The part is offered in the surface-mount package identified by the suffix code, with operating characteristics aligned to the original Freescale SC8544 datasheet. As an aftermarket-distributed part, the SC8544CPXANGA is targeted at sustaining legacy designs rather than new product introduction. Typical applications include routers and switches in legacy telecom installations, industrial serial communications controllers, and embedded networking appliances. Its PowerQUICC heritage makes it a fit where deterministic communications throughput and proven firmware ecosystems matter more than modern application-processor performance. When designing with this part, verify pinout and supply voltage against the original Freescale SC8544 datasheet, because the aftermarket-distributed marking may obscure the revision letter. Plan for long lead times typical of mature NXP/Freescale MPU inventory and confirm RoHS status per lot before assembly. This page synthesizes distributor availability across Octopart, DigiKey Marketplace, FPGACenter, and other channels, along with parametric comparison data not collected in any single manufacturer document, helping engineers locate the SC8544CPXANGA and plan substitution paths for legacy designs.

USD $97,50 En stock
SC8544CPXAQG - NXP/Freescale Microprocessor IC | BGA
SC8544CPXAQG

SC8544CPXAQG - NXP/Freescale Microprocessor IC | BGA

The NXP USA Inc. SC8544CPXAQG (formerly Freescale Semiconductor) is a specialized microprocessor / system-on-chip (SoC) integrated circuit housed in a surface-mount BGA package, intended for embedded computing and communications applications. Per Rochester Electronics distributor listings, the part is supplied as new, original-grade stock with full traceability documentation. A microprocessor (MPU) is the central processing unit of an embedded system, executing firmware instructions, managing peripherals, and handling protocol stacks. Specialized SoCs such as the SC8544CPXAQG extend the basic microprocessor hierarchy into application-specific variants that integrate CPU cores, memory controllers, and interface peripherals on a single die. Such parts sit at the top of the semiconductor taxonomy: SoC -> microprocessor -> microcontroller family -> integrated circuit -> semiconductor device. Key features of this part include its BGA package (offering high pin density and low parasitic inductance for multi-gigabit signal integrity), surface-mount construction suited to high-volume reflow assembly, and a recent manufacturing date code ensuring long-term supply availability through authorized distributors. Rochester Electronics' listing confirms the part is currently active in NXP's franchise distribution channel, providing a controlled, traceable source for legacy and sustaining programs. Typical applications for this device class include industrial control, networking infrastructure, and specialized embedded computing platforms where the part's combination of processing capability and I/O integration provides a compact, bill-of-materials-efficient solution. Designers integrating NXP/Freescale SoCs typically pair them with external DDR memory, power management ICs, and high-speed transceivers. When designing with this device, ensure the PCB footprint uses NSMD land pads with the via-in-pad or dog-bone fanout recommended by JEDEC for the specific BGA ball pitch; improper BGA pad geometry can induce Head-in-Pillow defects during reflow. Consult the manufacturer datasheet for thermal, clock, and reset requirements. This page synthesizes Rochester Electronics and DigiKey distributor data, package-level packaging notes, and cross-reference availability for legacy NXP/Freescale microprocessor stock not found together on any single distributor page.

USD $92,50 En stock
SC8544CPXAQGA - PowerQUICC III MPC8544 MPU | NXP | Industrial
SC8544CPXAQGA

SC8544CPXAQGA - PowerQUICC III MPC8544 MPU | NXP | Industrial

The NXP SC8544CPXAQGA is the PowerQUICC III MPC8544 RISC microprocessor designed by Freescale Semiconductor (now part of NXP) for high-performance networking and telecom applications. Housed in a surface-mount PQ38K (KFBA) package, this integrated MPU integrates an e500 processor core, system logic, and I/O peripherals in a single System-on-Chip (SoC) solution. The part is classified as a Specialized IC and ships in Bulk packaging per Rochester Electronics catalog records. A microprocessor (MPU) is an integrated central processing unit that fetches, decodes, and executes instructions from memory and orchestrates peripherals. The MPC8544 sits in the system hierarchy as: SoC -> communications processor -> microprocessor -> integrated circuit. PowerQUICC III devices were NXP/Freescale's flagship communications processors targeting routers, switches, and embedded control planes where deterministic throughput, multi-protocol I/O, and integration density all matter. Key features attributed to this part family include a Power Architecture e500 core, hardware acceleration blocks for encryption and pattern matching, DDR memory controllers, multiple Gigabit Ethernet MACs, and PCI Express / RapidIO serial interfaces (as documented in the MPC8544 family datasheet). The part has been observed in distributor listings at indicative unit pricing around USD 144.74 - USD 168.47 across LCSC, Rochester Electronics, FPGACenter, and YIC Electronics, reflecting its position as a long-lifecycle industrial component rather than a high-volume consumer IC. The SC8544CPXAQGA is widely deployed in legacy router line cards, telecom backplane controller boards, and industrial switching fabrics. Its integration of multiple gigabit interfaces makes it attractive for designs where board area and BOM cost are at a premium. Designers continue to specify it today because the surrounding ecosystem - compilers, RTOS support, and reference schematics - remains mature and stable. When designing with this part, engineers should plan around the relatively high power dissipation typical of PowerQUICC III devices and ensure the PCB thermal design delivers adequate heat spreading through the exposed thermal features of the package. Long-lifecycle procurement planning is advised because this part is approaching or has entered NRND/EOL in some channels; confirm last-time-buy status with NXP before committing to new production. This page synthesizes distributor pricing snapshots, drop-in compatibility notes, and design-in considerations specifically for the SC8544CPXAQGA variant, which are not consolidated in any single manufacturer document.

USD $144,74 En stock
SC908JK3EG5CPE - Obsolete Freescale Custom SoC LQFP-176 | NXP
SC908JK3EG5CPE

SC908JK3EG5CPE - Obsolete Freescale Custom SoC LQFP-176 | NXP

The NXP (formerly Freescale Semiconductor) SC908JK3EG5CPE is a specialized automotive-grade microcontroller / custom SoC from the Freescale SC908JK family, currently stocked by Rochester Electronics as a long-term support (LTS) part. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals (ADC, PWM, timers, communication controllers) into one package. SC908JK3EG5CPE sits within the broader hierarchy: microcontroller → embedded controller → semiconductor device → integrated circuit. Specialized variants like this one are typically customer-specific SoCs with masked ROM / custom firmware for tier-1 automotive and industrial applications. Key sourced facts include the original part identifier '908JK3E-TSC6-5L19E' (visible in the Jotrin listing), distribution through Rochester Electronics under Freescale/NXP branding, and the LQFP-176 surface-mount package footprint inherited from the SC908JK platform family. The '5L19E' suffix in the internal device string typically denotes a specific mask set, lead finish, and test revision used by Freescale/NXP automotive program management. The part is supplied in a 176-pin LQFP (Low-profile Quad Flat Package) with a gull-wing lead style and a body size in the 24 mm × 24 mm / 0.5 mm pitch class typical for SC908JK-family devices. The package supports the wide I/O count required for automotive body, chassis, or powertrain ECUs that the SC908JK platform targets. Typical end applications are automotive body control modules, instrument clusters, HVAC controllers, and industrial PLCs where a custom-masked variant reduces per-unit firmware cost versus an external flash MCU. The part is sourced today primarily through franchised distributors like Rochester Electronics for long-term aftermarket support. Designers should verify the Freescale/NXP reference manual and the device-specific mask errata before PCB bring-up; obsolete custom SoCs often require patched initialization sequences that differ from off-the-shelf Freescale reference firmware. This page synthesizes the most relevant Octopart, DigiKey Marketplace, Rochester Electronics, and Jotrin listings into one decision-ready datasheet view, including drop-in compatible parts, pricing tiers, and procurement alternatives not consolidated on any single distributor page.

Cotización En stock
SC9RS08KA2J3CSCR - 8-bit RS08 2KB Flash MCU | NXP Semiconductors
SC9RS08KA2J3CSCR

SC9RS08KA2J3CSCR - 8-bit RS08 2KB Flash MCU | NXP Semiconductors

The NXP Semiconductors (Freescale) SC9RS08KA2J3CSCR is an 8-bit RS08 CISC microcontroller with 2KB flash, 62 bytes RAM, an on-chip analog comparator, and an 8-pin SOIC package, designed for cost-sensitive embedded control at 2.5V/3.3V/5V supplies. It is part of the RS08KA entry-level family targeting simple logic replacement and low-power sensing nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), working memory (RAM), and a set of peripherals such as timers, comparators, ADCs, and communication interfaces. The RS08 is a streamlined CISC core that retains the HC08 instruction set for code portability while reducing silicon area and power consumption. Within the NXP product hierarchy, RS08 sits below the S08 and Kinetis E families, positioning SC9RS08KA2J3CSCR for applications that need more than a timer or analog switch but do not justify a 32-bit MCU. Key features include a 2KB flash program memory, 62 bytes RAM, an integrated analog comparator for sensor thresholding, and broad supply-voltage tolerance from 2.5V to 5V. The 8-pin SOIC footprint enables hand-solderable prototypes and very compact PCB layouts, while the CISC instruction set preserves a familiar programming model for engineers migrating from legacy HC08 designs. Technically, the device leverages a 20 MHz bus architecture with reduced-power modes and a low quiescent current profile, supporting battery-operated duty-cycled designs. The integrated analog comparator eliminates the need for an external op-amp in many threshold-detection circuits, and the small flash footprint simplifies in-system programming. Together, these features make SC9RS08KA2J3CSCR well suited to appliance user interfaces, sensor front-ends, and simple motor or relay control loops. Typical applications include battery-powered sensor nodes, AC mains zero-cross detection when paired with an optocoupler, smoke-detector signal conditioning, and small home-appliance control boards. It also fits logic-replacement designs where a handful of discrete gates or a timer IC would otherwise be needed. When designing with this part, evaluate the 2KB flash and 62-byte RAM ceilings against the worst-case state and code size of the application. Use the on-chip analog comparator in place of an external op-amp to reduce BOM cost and PCB area, and add a 0.1uF bypass capacitor adjacent to the supply pin for noise immunity. This page synthesizes distributor pricing, drop-in and same-family alternatives, and practical design notes not consolidated on any single distributor listing.

USD $0,86 En stock
SC9S08LL36J1CLH - 8-Bit 40MHz 36KB MCU | NXP Semiconductors
SC9S08LL36J1CLH

SC9S08LL36J1CLH - 8-Bit 40MHz 36KB MCU | NXP Semiconductors

The NXP Semiconductors SC9S08LL36J1CLH is an 8-bit HC08/S08 microcontroller operating at 40 MHz, with 36 KB of Flash memory, supplied in a 64-pin LQFP package. Distributor records classify it as an embedded microcontroller for segment-LCD applications. Its supplied verified listing identifies 36K x 8 Flash organization, while additional electrical, memory-map, peripheral, and environmental details remain unavailable in the provided records. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interface logic into one device. The HC08/S08 CPU belongs to an 8-bit embedded-control family used to execute firmware for sensing, display, communications, timing, and actuator-control functions. Compared with a discrete processor design, an MCU can reduce board size and integration effort while providing deterministic peripheral access for embedded products. The principal verified features of the SC9S08LL36J1CLH are its 40 MHz operating frequency, 8-bit CPU architecture, 36 KB Flash memory, and 64-pin LQFP package. A 40 MHz clock provides computational headroom for mixed control logic, while Flash permits firmware storage and updates. The LQFP package exposes more connection pins than a small-outline package, potentially supporting external memory, segment displays, communication interfaces, and additional control signals, although the exact peripheral allocation is not present in the supplied data. The Rochester Electronics product result describes the device as an 8-bit HC08/S08 segment-LCD MCU. This positioning makes it relevant to human-interface equipment where a microcontroller scans display segments while managing keypad input and embedded control functions. The exact LCD segment count, RAM capacity, supply voltage, timers, serial interfaces, and pin functions must be confirmed in the manufacturer datasheet before schematic or firmware design. Typical design uses include segment-LCD instruments, industrial panels, compact controllers, embedded keypads, and low-to-medium-complexity control products. The 36 KB Flash capacity is meaningful for moderate firmware, but memory planning should include boot code, application code, interrupts, calibration data, and future revisions. Because the verified data does not provide RAM size or peripheral details, engineers should not infer those values from the family name. Before layout or replacement work, obtain the official SC9S08LL36J1CLH datasheet and verify all 64 pins, power requirements, clock options, reset behavior, and peripheral multiplexing. This matters especially when adapting older Freescale HC08/S08 designs, where package fit alone does not prove firmware, timing, or peripheral compatibility. This product page consolidates verified distributor pricing, package information, sourcing links, and engineering-selection guidance. It does not invent missing technical values: unavailable specifications are explicitly marked for follow-up rather than inferred from related S08 devices.

USD $8,02 En stock
SC9S08LL36J1CLH557 - 8-bit S08 MCU 36KB Flash 40MHz LCD | NXP
SC9S08LL36J1CLH557

SC9S08LL36J1CLH557 - 8-bit S08 MCU 36KB Flash 40MHz LCD | NXP

The NXP Semiconductors SC9S08LL36J1CLH557 is an 8-bit microcontroller based on the S08 core, operating at up to 40 MHz with 36 KB of FLASH program memory, integrated segment LCD controller, and a 64-pin LQFP package. It is a member of the S08LL family, which NXP (formerly Freescale) designed specifically for battery-powered products that must drive segmented liquid-crystal displays. An 8-bit microcontroller is a single-chip processor that manipulates data in 8-bit words, combining CPU, memory, and peripherals in one package. Within the power-management hierarchy of embedded systems, the S08LL family sits in the low-power MCU segment, below 32-bit application processors but above simple timer ICs, providing complete system control for handheld instruments. Key features of the SC9S08LL36J1CLH557 include 36KB (36K x 8) of on-chip FLASH, a maximum core speed of 40 MHz, an on-board Analog-to-Digital Converter (ADC), Pulse-Width Modulation (PWM) channels, and 37 general-purpose I/O lines. The device supports a minimum supply voltage of 1.8 V when operating at 20 MHz, which is central to its battery-life advantage. The S08LL architecture integrates NXP's low-power technology: multiple low-power modes, an on-chip oscillator, and a dedicated segment LCD driver that offloads display refresh from the CPU, allowing the core to remain in stop modes between updates. This extends battery life in always-on display applications. Typical applications include medical diagnostics instruments, handheld appliances, utility metering displays, and other battery-operated products where a segmented LCD, ADC measurements, and long standby times coexist. When designing with this MCU, verify that your operating frequency and supply voltage pair complies with the datasheet operating ranges; running near 40 MHz requires a higher supply rail than the 1.8 V minimum used at 20 MHz. This page synthesizes distributor pricing, stock availability, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

USD $2,10 En stock